set -e
+echo_err() { echo "$@" 1>&2 ; }
+
+tstamp() { echo -n "[$(date '+%H:%M:%S')]" ; }
+
+run_or_err() {
+ echo_err -n "$(tstamp) $1 ... "
+
+ LASTOUT=$( bash -c "$2" 2>&1)
+ LASTEXIT=$?
+ if [[ "$LASTEXIT" != "0" ]] ; then
+ echo_err -e "FAILED !!!\nCommand executed:\n$2\nSTDOUT+STDERR:\n$LASTOUT"
+ return $LASTEXIT
+ else
+ echo_err "done."
+ fi
+}
+
if [[ "$TRAVIS" != "true" ]] ; then
- echo "Running this script makes no sense outside of travis-ci"
+ echo_err "Running this script makes no sense outside of travis-ci"
exit 1
fi
# build options for perlbrew
#
+echo_err "$(tstamp) Smoke preconfiguration starting $(date)"
+
+TRAVIS_CPAN_MIRROR=$(echo "$PERL_CPANM_OPT" | grep -oP -- '--mirror\s+\S+' | head -n 1 | cut -d ' ' -f 2)
+if ! [[ "$TRAVIS_CPAN_MIRROR" =~ "http://" ]] ; then
+ echo_err "Unable to extract primary cpan mirror from PERL_CPANM_OPT - something is wrong"
+ echo_err "PERL_CPANM_OPT: $PERL_CPANM_OPT"
+ exit 1
+fi
+
+export PERL_MM_USE_DEFAULT=1 PERL_MM_NONINTERACTIVE=1 PERL_AUTOINSTALL_PREFER_CPAN=1 PERLBREW_CPAN_MIRROR="$TRAVIS_CPAN_MIRROR"
+
+# Fixup CPANM_OPT to behave more like a traditional cpan client
+export PERL_CPANM_OPT="$( echo $PERL_CPANM_OPT | sed 's/--skip-satisfied//' )"
+
if [[ -n "$BREWVER" ]] ; then
# if this is not master and not a smoke/ branch - cancel all testing
if [[ "$TRAVIS_BRANCH" =~ "topic/" ]]; then
export SHORT_CIRCUIT_SMOKE=1
+ echo_err "$(tstamp) non-smoke branch and custom perl compilation requested - bailing out"
sleep 20 # give the console time to attach, otherwise it hangs
return # this is like an `exit 0` in sourcing
fi
- perlbrew install --as $BREWVER --notest $BREWOPTS -j $NUMTHREADS perl-$BREWVER
+ run_or_err "Compiling/installing Perl $BREWVER (without testing, may take up to 5 minutes)" \
+ "perlbrew install --as $BREWVER --notest $BREWOPTS -j $NUMTHREADS perl-$BREWVER"
+
perlbrew use $BREWVER
fi
-export PERL_MM_USE_DEFAULT=1 PERL_MM_NONINTERACTIVE=1 PERL_AUTOINSTALL_PREFER_CPAN=1
-export PERL_CPANM_OPT="$( echo $PERL_CPANM_OPT | sed 's/--skip-satisfied//' )"
+# configure CPAN.pm - older versions go into an endless loop
+# when trying to autoconf themselves
+CPAN_CFG_SCRIPT="
+ require CPAN;
+ require CPAN::FirstTime;
+ *CPAN::FirstTime::conf_sites = sub {};
+ CPAN::Config->load;
+ \$CPAN::Config->{urllist} = [qw{ $TRAVIS_CPAN_MIRROR }];
+ \$CPAN::Config->{halt_on_failure} = 1;
+ CPAN::Config->commit;
+"
+run_or_err "Configuring CPAN.pm" "perl -e '$CPAN_CFG_SCRIPT'"
+
+extract_prereqs() {
+ # hack-hack-hack
+ COMBINED_OUT="$( { stdout="$(cpanm --quiet --scandeps --format tree "$@")" ; } 2>&1; echo "!!!STDERRSTDOUTSEPARATOR!!!$stdout")" \
+ || LASTEXIT=$?
+
+ OUT=${COMBINED_OUT#*!!!STDERRSTDOUTSEPARATOR!!!}
+ ERR=$(grep -v " is up to date." <<< "${COMBINED_OUT%!!!STDERRSTDOUTSEPARATOR!!!*}")
+
+ [[ -n "$LASTEXIT" ]] || LASTEXIT=0
+ if [[ "$LASTEXIT" != "0" ]] || [[ -n "$ERR" ]] ; then
+ echo_err "$(echo -e "Error occured (exit code $LASTEXIT) retrieving dependencies of $@:\n$ERR\n$OUT")"
+ exit 1
+ fi
+
+ # throw away non-children (what was in $@), throw away ascii art, convert to modnames
+ perl -p -e 's/^\s*[^\\].+//; s/^[^A-Za-z]+//; s/\-[^\-]+$/ /; s/\-/::/g' <<< "$OUT"
+}
-installdeps() {
+parallel_installdeps_notest() {
if [[ -z "$@" ]] ; then return; fi
+ # flatten list into one string
+ MODLIST=$(echo "$@")
+
# The reason we do things so "non-interactively" is that xargs -P will have the
# latest cpanm instance overwrite the buildlog. There seems to be no way to
# specify a custom buildlog, hence we just collect the verbose output
# and display it in case of failure
- echo -n "Installing $@... "
- if ! OUT=$( echo "$@" | xargs -n 1 -P $NUMTHREADS cpanm --verbose --no-interactive --notest --no-man-pages 2>&1 ) ; then
- EX=$?
- echo "FAILED !!!"
- echo "$OUT"
- exit $?
- else
- echo "done."
- fi
+ run_or_err "Installing (without testing) $MODLIST" \
+ "echo $MODLIST | xargs -n 1 -P $NUMTHREADS cpanm --verbose --no-interactive --notest --no-man-pages"
}
# Install *hard dep* modules that typically appear in more than one dep
# times, and to avoid module re-architecture breaking another install
# (e.g. once Carp is upgraded there's no more Carp::Heavy)
#
-installdeps $(cpanm --notest --quiet --showdeps Module::Build)
-installdeps Test::Exception Test::Fatal Module::Runtime Carp
-installdeps Sub::Name multidimensional namespace::clean Class::XSAccessor MRO::Compat
-installdeps DBI Moo Class::Accessor::Grouped
-
-# configure CPAN.pm - older versions get tickled by M::AI and
-# go into an endless loop when trying to autoconf themselves
-# we are not *supposed* to actually use it, this is just a
-# precaution
-perl -e '
- require CPAN;
- require CPAN::FirstTime;
- *CPAN::FirstTime::conf_sites = sub {};
- CPAN::Config->load;
- $CPAN::Config->{urllist} = [ "http://cpan.cpantesters.org/" ];
- CPAN::Config->commit;
-' &> /dev/null
+parallel_installdeps_notest $(extract_prereqs Module::Build)
+parallel_installdeps_notest Test::Exception Test::Fatal Module::Runtime Carp
+parallel_installdeps_notest Sub::Name multidimensional namespace::clean Class::XSAccessor MRO::Compat
+parallel_installdeps_notest DBI Moo Class::Accessor::Grouped
if [[ "$CLEANTEST" = "true" ]]; then
# get the last inc/ off cpan - we will get rid of MI
# effects from travis preinstalls)
# trick cpanm into executing true as shell - we just need the find+unpack
- SHELL=/bin/true cpanm --look DBIx::Class
- mv ~/.cpanm/latest-build/*/inc .
+ run_or_err "Downloading DBIC inc/ from CPAN" \
+ "SHELL=/bin/true cpanm --look DBIx::Class"
+
+ mv ~/.cpanm/latest-build/DBIx-Class-*/inc .
else
# we will be running all tests - preinstall MOAR stuff, run basic tests using SQLT
# and set up whatever databases necessary
- installdeps Module::Install DateTime::Format::Strptime MooseX::Types JSON::Any Class::DBI
+ parallel_installdeps_notest Module::Install DateTime::Format::Strptime MooseX::Types JSON::Any Class::DBI
export DBICTEST_SQLT_DEPLOY=1
sudo bash -c 'echo -e "firebird2.5-super\tshared/firebird/enabled\tboolean\ttrue" | debconf-set-selections'
sudo bash -c 'echo -e "firebird2.5-super\tshared/firebird/sysdba_password/new_password\tpassword\t123" | debconf-set-selections'
- sudo apt-get install -y memcached firebird2.5-super firebird2.5-dev expect
+ APT_PACKAGES="memcached firebird2.5-super firebird2.5-dev expect"
+ run_or_err "Installing packages ($APT_PACKAGES)" "sudo apt-get install -y $APT_PACKAGES"
### memcached
export DBICTEST_MEMCACHED=127.0.0.1:11211
### mysql
- mysql -e 'create database dbic_test;'
+ run_or_err "Creating MySQL TestDB" "mysql -e 'create database dbic_test;'"
export DBICTEST_MYSQL_DSN='dbi:mysql:database=dbic_test;host=127.0.0.1'
export DBICTEST_MYSQL_USER=root
### pg
- psql -c 'create database dbic_test;' -U postgres
+ run_or_err "Creating PostgreSQL TestDB" "psql -c 'create database dbic_test;' -U postgres"
export DBICTEST_PG_DSN='dbi:Pg:database=dbic_test;host=127.0.0.1'
export DBICTEST_PG_USER=postgres
### firebird
# poor man's deb config
- echo -n "Re-configuring firebird... "
- if ! OUT=$(
+ EXPECT_FB_SCRIPT='
+ spawn dpkg-reconfigure --frontend=text firebird2.5-super
+ expect "Enable Firebird server?"
+ send "\177\177\177\177yes\r"
+ expect "Password for SYSDBA"
+ send "123\r"
+ sleep 1
+ wait
+ sleep 1
+ '
+ run_or_err "Re-configuring Firebird" "
sync
- DEBIAN_FRONTEND=text sudo expect -c '
- spawn dpkg-reconfigure --frontend=text firebird2.5-super
- expect "Enable Firebird server?"
- send "\177\177\177\177yes\r"
- expect "Password for SYSDBA"
- send "123\r"
- sleep 1
- wait
- sleep 1
- '
+ DEBIAN_FRONTEND=text sudo expect -c '$EXPECT_FB_SCRIPT'
+ sleep 1
sync
# restart the server for good measure
sudo /etc/init.d/firebird2.5-super stop || true
- sleep 3
+ sleep 1
+ sync
sudo /etc/init.d/firebird2.5-super start
- ) ; then
- EX=$?
- echo "FAILED !!!"
- echo "$OUT"
- exit $?
- else
- echo "done."
- fi
+ sleep 1
+ sync
+ "
# creating testdb
- sudo isql-fb -u sysdba -p 123 <<< "CREATE DATABASE '/var/lib/firebird/2.5/data/dbic_test.fdb';"
+ run_or_err "Creating Firebird TestDB" \
+ "echo \"CREATE DATABASE '/var/lib/firebird/2.5/data/dbic_test.fdb';\" | sudo isql-fb -u sysdba -p 123"
# the official version is full of 5.10-isms, but works perfectly fine on 5.8
# pull in our patched copy
- git clone https://github.com/dbsrgits/perl-dbd-firebird-5.8.git ~/dbd-firebird
+ run_or_err "Fetching patched DBD::Firebird" \
+ "git clone https://github.com/dbsrgits/perl-dbd-firebird-5.8.git ~/dbd-firebird"
# the official version is very much outdated and does not compile on 5.14+
# use this rather updated source tree (needs to go to PAUSE):
# https://github.com/pilcrow/perl-dbd-interbase
- git clone https://github.com/dbsrgits/perl-dbd-interbase ~/dbd-interbase
+ run_or_err "Fetching patched DBD::InterBase" \
+ "git clone https://github.com/dbsrgits/perl-dbd-interbase ~/dbd-interbase"
- installdeps ~/dbd-interbase/ ~/dbd-firebird/
+ parallel_installdeps_notest ~/dbd-interbase/ ~/dbd-firebird/
export DBICTEST_FIREBIRD_DSN=dbi:Firebird:dbname=/var/lib/firebird/2.5/data/dbic_test.fdb
export DBICTEST_FIREBIRD_USER=SYSDBA
#ORACLE_HOME=/usr/lib/oracle/xe/app/oracle/product/10.2.0/client
fi
-# install the remaining dependencies
-perl Makefile.PL
-installdeps $(make listalldeps)
+# generate the makefile which will have different deps depending on
+# the runmode and envvars set above
+run_or_err "Configure on current branch" "perl Makefile.PL"
-# announce what are we running
-perl -V
-echo "Using $NUMTHREADS Travis-CI concurrent processes"
+# install the remaining dependencies
+parallel_installdeps_notest $(make listalldeps)
# make sure we got everything we need
perl Makefile.PL &> /dev/null
if [[ -n "$(make listdeps)" ]] ; then
- echo "Not all deps installed - something went wrong :("
+ echo_err "$(tstamp) Not all deps installed - something went wrong :("
make listdeps
exit 1
fi
+
+run_or_err "Prepare blib" "make pure_all"
+
+# announce what are we running
+perl -V
+echo_err "$(tstamp) Starting tests using $NUMTHREADS concurrent processes"
projects / dbsrgits/DBIx-Class.git / commitdiff