#!/bin/bash
+# "autodie"
set -e
+TEST_STDERR_LOG=/tmp/dbictest.stderr
+TIMEOUT_CMD="/usr/bin/timeout --kill-after=16m --signal=TERM 15m"
+
echo_err() { echo "$@" 1>&2 ; }
if [[ "$TRAVIS" != "true" ]] ; then
tstamp() { echo -n "[$(date '+%H:%M:%S')]" ; }
+CPAN_is_sane() { perl -MCPAN\ 1.94_56 -e 1 &>/dev/null ; }
+
+CPAN_supports_BUILDPL() { perl -MCPAN\ 1.9205 -e1 &>/dev/null; }
+
+have_sudo() { sudo /bin/true &>/dev/null ; }
+
+is_cperl() { [[ "$BREWVER" =~ $( echo -n "^cperl-" ) ]] ; }
+
+ci_vm_state_text() {
+ echo "
+========================== CI System information ============================
+
+= CPUinfo
+$(perl -0777 -p -e 's/.+\n\n(?!\z)//s' < /proc/cpuinfo)
+
+= Meminfo
+$(free -m -t)
+
+= Diskinfo
+$(df -h)
+
+$(mount | grep '^/')
+
+= Kernel info
+$(uname -a)
+
+= Network Configuration
+$(ip addr)
+
+= Network Sockets Status
+$( (sudo netstat -an46p || netstat -an46p) | grep -Pv '\s(CLOSING|(FIN|TIME|CLOSE)_WAIT.?|LAST_ACK)\s')
+
+= Processlist
+$(ps fuxa)
+
+= Environment
+$(env | grep -P 'TEST|HARNESS|MAKE|TRAVIS|PERL|DBIC|PATH|SHELL' | LC_ALL=C sort | cat -v)
+
+= Perl in use
+$(perl -V)
+============================================================================="
+}
+
run_or_err() {
echo_err -n "$(tstamp) $1 ... "
+ LASTCMD="$2"
LASTEXIT=0
START_TIME=$SECONDS
- LASTOUT=$( bash -c "$2" 2>&1 ) || LASTEXIT=$?
+
+ PRMETER_PIDFILE="$(tempfile)_$SECONDS"
+ # the double bash is to hide the job control messages
+ bash -c "bash -c 'echo \$\$ >> $PRMETER_PIDFILE; while true; do sleep 10; echo -n \"\${SECONDS}s ... \"; done' &"
+
+ LASTOUT=$( eval "$2" 2>&1 ) || LASTEXIT=$?
+
+ # stop progress meter
+ for p in $(cat "$PRMETER_PIDFILE"); do kill $p ; done
+
DELTA_TIME=$(( $SECONDS - $START_TIME ))
if [[ "$LASTEXIT" != "0" ]] ; then
- echo_err -e "FAILED !!! (after ${DELTA_TIME}s)\nCommand executed:\n$2\nSTDOUT+STDERR:\n$LASTOUT"
+ if [[ -z "$3" ]] ; then
+ echo_err "FAILED !!! (after ${DELTA_TIME}s)"
+ echo_err "Command executed:"
+ echo_err "$LASTCMD"
+ echo_err "STDOUT+STDERR:"
+ echo_err "$LASTOUT"
+ if [[ "$(dmesg)" =~ $( echo "\\bOOM\\b" ) ]] ; then
+ echo_err "=== dmesg ringbuffer"
+ echo_err "$(dmesg)"
+ fi
+ fi
+
return $LASTEXIT
else
echo_err "done (took ${DELTA_TIME}s)"
fi
}
+apt_install() {
+ # flatten
+ pkgs="$@"
+
+ run_or_err "Installing Debian APT packages: $pkgs" "sudo apt-get install --allow-unauthenticated --no-install-recommends -y $pkgs"
+}
+
extract_prereqs() {
+ # once --verbose is set, --no-verbose can't disable it
+ # do this by hand
+ local PERL_CPANM_OPT="$( echo $PERL_CPANM_OPT | sed 's/--verbose\s*//' )"
+
# hack-hack-hack
LASTEXIT=0
COMBINED_OUT="$( { stdout="$(cpanm --quiet --scandeps --format tree "$@")" ; } 2>&1; echo "!!!STDERRSTDOUTSEPARATOR!!!$stdout")" \
|| LASTEXIT=$?
OUT=${COMBINED_OUT#*!!!STDERRSTDOUTSEPARATOR!!!}
- ERR=$(grep -v " is up to date." <<< "${COMBINED_OUT%!!!STDERRSTDOUTSEPARATOR!!!*}")
+ ERR=${COMBINED_OUT%!!!STDERRSTDOUTSEPARATOR!!!*}
- if [[ "$LASTEXIT" != "0" ]] || [[ -n "$ERR" ]] ; then
- echo_err "$(echo -e "Error occured (exit code $LASTEXIT) retrieving dependencies of $@:\n$ERR\n$OUT")"
+ if [[ "$LASTEXIT" != "0" ]] ; then
+ echo_err "Error occured (exit code $LASTEXIT) retrieving dependencies of $@:"
+ echo_err "$ERR"
+ echo_err "$OUT"
exit 1
fi
- # throw away non-children (what was in $@), throw away ascii art, convert to modnames
- perl -p -e 's/^[a-z].+//i; s/^[^a-z]+//i; s/\-[^\-]+$/ /; s/\-/::/g' <<< "$OUT"
+ # throw away warnings, up-to-date diag, ascii art, convert to modnames
+ PQ=$(perl -p -e '
+ s/^.*?is up to date.*$//;
+ s/^\!.*//;
+ s/^[^a-z]+//i;
+ s/\-[^\-]+$/ /; # strip version part
+ s/\-/::/g
+ ' <<< "$OUT")
+
+ # throw away what was in $@
+ for m in "$@" ; do
+ PQ=$( perl -p -e 's/(?:\s|^)\Q'"$m"'\E(?:\s|$)/ /mg' <<< "$PQ")
+ done
+
+ # RV
+ echo "$PQ"
}
parallel_installdeps_notest() {
if [[ -z "$@" ]] ; then return; fi
- # flatten list into one string
- MODLIST=$(echo "$@")
+ is_cperl && echo_err "cpanminus is not yet usable on cperl" && exit 1
+
+ # one module spec per line
+ MODLIST="$(printf '%s\n' "$@" | sort -R)"
- # The reason we do things so "non-interactively" is that xargs -P will have the
- # latest cpanm instance overwrite the buildlog. There seems to be no way to
- # specify a custom buildlog, hence we just collect the verbose output
- # and display it in case of failure
- run_or_err "Installing (without testing) $MODLIST" \
- "echo $MODLIST | xargs -n 1 -P $NUMTHREADS cpanm --verbose --no-interactive --notest --no-man-pages"
+ # We want to trap the output of each process and serially append them to
+ # each other as opposed to just dumping a jumbled up mass-log that would
+ # need careful unpicking by a human
+ #
+ # While cpanm does maintain individual buildlogs in more recent versions,
+ # we are not terribly interested in trying to figure out which log is which
+ # dist. The verbose-output + trap STDIO technique is vastly superior in this
+ # particular case
+ #
+ # Explanation of inline args:
+ #
+ # [09:38] <T> you need a $0
+ # [09:38] <G> hence the _
+ # [09:38] <G> bash -c '...' _
+ # [09:39] <T> I like -- because it's the magic that gnu getopts uses for somethign else
+ # [09:39] <G> or --, yes
+ # [09:39] <T> ribasushi: you could put "giant space monkey penises" instead of "--" and it would work just as well
+ #
+ run_or_err "Installing (without testing) $(echo $MODLIST)" \
+ "echo \\
+\"$MODLIST\" \\
+ | xargs -d '\\n' -n 1 -P $VCPU_USE bash -c \\
+ 'OUT=\$(maint/getstatus $TIMEOUT_CMD cpanm --notest \"\$@\" 2>&1 ) || (LASTEXIT=\$?; echo \"\$OUT\"; exit \$LASTEXIT)' \\
+ 'giant space monkey penises'
+ "
}
+export -f parallel_installdeps_notest run_or_err echo_err tstamp is_cperl have_sudo CPAN_is_sane CPAN_supports_BUILDPL
-CPAN_is_sane() { perl -MCPAN\ 1.94_56 -e 1 &>/dev/null ; }
+installdeps() {
+ if [[ -z "$@" ]] ; then return; fi
+
+ MODLIST=$(printf "%q " "$@" | perl -pe 's/^\s+|\s+$//g')
+
+ local -x HARNESS_OPTIONS
+
+ HARNESS_OPTIONS="j$VCPU_USE"
+
+ if ! run_or_err "Attempting install of $# modules under parallel ($HARNESS_OPTIONS) testing ($MODLIST)" "_dep_inst_with_test $MODLIST" quiet_fail ; then
+ local errlog="failed after ${DELTA_TIME}s Exit:$LASTEXIT Log:$(/usr/bin/perl /usr/bin/nopaste -q -s Shadowcat -d "Parallel testfail" <<< "$LASTOUT")"
+ echo "$errlog"
+
+ POSTMORTEM="$POSTMORTEM$(
+ echo
+ echo "Depinstall of $MODLIST under $HARNESS_OPTIONS parallel testing $errlog"
+ )"
+
+ HARNESS_OPTIONS=""
+ run_or_err "Retrying same $# modules without parallel testing" "_dep_inst_with_test $MODLIST"
+ fi
+
+ INSTALLDEPS_OUT="${INSTALLDEPS_OUT}${LASTOUT}"
+}
+
+_dep_inst_with_test() {
+ if [[ "$DEVREL_DEPS" == "true" ]] ; then
+ is_cperl && echo_err "cpanminus is not yet usable on cperl" && exit 1
+
+ # --dev is already part of CPANM_OPT
+ LASTCMD="$TIMEOUT_CMD cpanm $@"
+ $LASTCMD 2>&1 || return 1
+ else
+ LASTCMD="$TIMEOUT_CMD cpan $@"
+ $LASTCMD 2>&1 || return 1
+
+ # older perls do not have a CPAN which can exit with error on failed install
+ for m in "$@"; do
+ if ! perl -e '
+
+$ARGV[0] =~ s/-TRIAL\.//;
+
+my $mod = (
+ # abuse backtrack
+ $ARGV[0] =~ m{ / .*? ( [^/]+ ) $ }x
+ ? do { my @p = split (/\-/, $1); pop @p; join "::", @p }
+ : $ARGV[0]
+);
+
+# map some install-names to a module/version combo
+# serves both as a grandfathered title-less tarball, and
+# as a minimum version check for upgraded core modules
+my $eval_map = {
+
+ # this is temporary, will need something more robust down the road
+ # (perhaps by then Module::CoreList will be dep-free)
+ "Module::Build" => { ver => "0.4214" },
+ "podlators" => { mod => "Pod::Man", ver => "2.17" },
+
+ "File::Spec" => { ver => "3.47" },
+ "Cwd" => { ver => "3.47" },
+
+ "List::Util" => { ver => "1.42" },
+ "Scalar::Util" => { ver => "1.42" },
+ "Scalar::List::Utils" => { mod => "List::Util", ver => "1.42" },
+};
+
+my $m = $eval_map->{$mod}{mod} || $mod;
+
+eval(
+ "require $m"
+
+ .
+
+ ($eval_map->{$mod}{ver}
+ ? "; $m->VERSION(\$eval_map->{\$mod}{ver}) "
+ : ""
+ )
+
+ .
+
+ "; 1"
+)
+ or
+( print $@ and exit 1)
+
+ ' "$m" 2> /dev/null ; then
+ echo -e "$m installation seems to have failed"
+ return 1
+ fi
+ done
+ fi
+}
+
+# Idea stolen from
+# https://github.com/kentfredric/Dist-Zilla-Plugin-Prereqs-MatchInstalled-All/blob/master/maint-travis-ci/sterilize_env.pl
+# Only works on 5.12+ (where sitelib was finally properly fixed)
+purge_sitelib() {
+ echo_err "$(tstamp) Sterilizing the Perl installation (cleaning up sitelib)"
+
+ if perl -M5.012 -e1 &>/dev/null ; then
+
+ perl -M5.012 -MConfig -MFile::Find -e '
+ my $sitedirs = {
+ map { $Config{$_} => 1 }
+ grep { $_ =~ /site(lib|arch)exp$/ }
+ keys %Config
+ };
+ find({ bydepth => 1, no_chdir => 1, follow_fast => 1, wanted => sub {
+ ! $sitedirs->{$_} and ( -d _ ? rmdir : unlink )
+ } }, keys %$sitedirs )
+ '
+ else
+
+ cl_fn="/tmp/${TRAVIS_BUILD_ID}_Module_CoreList.pm";
+
+ [[ -s "$cl_fn" ]] || run_or_err \
+ "Downloading latest Module::CoreList" \
+ "curl -s --compress -o '$cl_fn' https://api.metacpan.org/source/Module::CoreList"
+
+ perl -0777 -Ilib -MDBIx::Class::Optional::Dependencies -e '
+
+ # this is horrible, but really all we want is "has this ever been used"
+ # so a grep without a load is quite legit (and horrible)
+ my $mcl_source = <>;
+
+ my @all_possible_never_been_core_modpaths = map
+ { (my $mp = $_ . ".pm" ) =~ s|::|/|g; $mp }
+ grep
+ { $mcl_source !~ / ^ \s+ \x27 $_ \x27 \s* \=\> /mx }
+ (
+ qw(
+ Module::Build::Tiny
+ ),
+ keys %{ DBIx::Class::Optional::Dependencies->modreq_list_for([
+ keys %{ DBIx::Class::Optional::Dependencies->req_group_list }
+ ])}
+ )
+ ;
+
+ # now that we have the list we can go ahead and destroy every single one
+ # of these modules without being concerned about breaking the base ability
+ # to install things
+ for my $mp ( sort { lc($a) cmp lc($b) } @all_possible_never_been_core_modpaths ) {
+ for my $incdir (@INC) {
+ -e "$incdir/$mp"
+ and
+ unlink "$incdir/$mp"
+ and
+ print "Nuking $incdir/$mp\n"
+ }
+ }
+ ' "$cl_fn"
+
+ fi
+}
projects / dbsrgits/DBIx-Class.git / blobdiff