#!/bin/bash
-source maint/travis-ci_scripts/common.bash
if [[ -n "$SHORT_CIRCUIT_SMOKE" ]] ; then return ; fi
-CPAN_MIRROR=$(echo "$PERL_CPANM_OPT" | grep -oP -- '--mirror\s+\S+' | head -n 1 | cut -d ' ' -f 2)
-if ! [[ "$CPAN_MIRROR" =~ "http://" ]] ; then
- echo_err "Unable to extract primary cpan mirror from PERL_CPANM_OPT - something is wrong"
- echo_err "PERL_CPANM_OPT: $PERL_CPANM_OPT"
- CPAN_MIRROR="http://cpan.metacpan.org/"
- PERL_CPANM_OPT="$PERL_CPANM_OPT --mirror $CPAN_MIRROR"
- echo_err "Using $CPAN_MIRROR for the time being"
-fi
+# we need a mirror that both has the standard index and a backpan version rolled
+# into one, due to MDV testing
+export CPAN_MIRROR="http://cpan.metacpan.org/"
+
+PERL_CPANM_OPT="$PERL_CPANM_OPT --mirror $CPAN_MIRROR"
-export PERL_MM_USE_DEFAULT=1 PERL_MM_NONINTERACTIVE=1 PERL_AUTOINSTALL_PREFER_CPAN=1 PERLBREW_CPAN_MIRROR="$CPAN_MIRROR"
+# do not set PERLBREW_CPAN_MIRROR - not all backpan-like mirrors have the perl tarballs
+export PERL_MM_USE_DEFAULT=1 PERL_MM_NONINTERACTIVE=1 PERL_AUTOINSTALL_PREFER_CPAN=1 HARNESS_TIMER=1 MAKEFLAGS="-j$VCPU_USE"
# try CPAN's latest offering if requested
if [[ "$DEVREL_DEPS" == "true" ]] ; then
- if [[ "$CLEANTEST" == "true" ]] ; then
- echo_err "DEVREL_DEPS combined with CLEANTEST makes no sense - it is only possible with cpanm"
- exit 1
- fi
-
PERL_CPANM_OPT="$PERL_CPANM_OPT --dev"
- # FIXME work around https://github.com/miyagawa/cpanminus/issues/308
- TEST_BUILDER_BETA_CPAN_TARBALL="M/MS/MSCHWERN/Test-Simple-1.005000_006.tar.gz"
fi
# Fixup CPANM_OPT to behave more like a traditional cpan client
export PERL_CPANM_OPT="--verbose --no-interactive --no-man-pages $( echo $PERL_CPANM_OPT | sed 's/--skip-satisfied//' )"
if [[ -n "$BREWVER" ]] ; then
- run_or_err "Compiling/installing Perl $BREWVER (without testing, may take up to 5 minutes)" \
- "perlbrew install --as $BREWVER --notest --noman --verbose $BREWOPTS -j 2 $BREWVER"
- # can not do 'perlbrew uss' in the run_or_err subshell above, or a $()
- # furthermore `perlbrew use` returns 0 regardless of whether the perl is
- # found (won't be there unless compilation suceeded, wich *ALSO* returns 0)
- perlbrew use $BREWVER
+ # since perl 5.14 a perl can safely be built concurrently with -j$large
+ # (according to brute force testing and my power bill)
+ if [[ "$BREWVER" =~ [A-Za-z] ]] || perl -Mversion -e "exit !!(version->new(q($BREWVER)) < 5.014)" ; then
+ perlbrew_jopt="$VCPU_USE"
+ fi
- if [[ "$( perlbrew use | grep -oP '(?<=Currently using ).+' )" != "$BREWVER" ]] ; then
+ BREWSRC="$BREWVER"
+
+ if is_cperl; then
+ if [[ "$BREWVER" == "cperl-master" ]] ; then
+ git clone --single-branch --depth=1 --branch=master https://github.com/perl11/cperl /tmp/cperl-master
+ BREWSRC="/tmp/cperl-master"
+ else
+ # FFS perlbrew ( see http://wollmers-perl.blogspot.de/2015/10/install-cperl-with-perlbrew.html )
+ wget -qO- https://github.com/perl11/cperl/archive/$BREWVER.tar.gz > /tmp/cperl-$BREWVER.tar.gz
+ BREWSRC="/tmp/cperl-$BREWVER.tar.gz"
+ fi
+ elif [[ "$BREWVER" == "schmorp_stableperl" ]] ; then
+ BREWSRC="http://stableperl.schmorp.de/dist/stableperl-5.22.0-1.001.tar.gz"
+ fi
+
+ run_or_err "Compiling/installing Perl $BREWVER (without testing, using ${perlbrew_jopt:-1} threads, may take up to 5 minutes)" \
+ "perlbrew install --as $BREWVER --notest --noman --verbose $BREWOPTS -j${perlbrew_jopt:-1} $BREWSRC"
+
+ # FIXME work around https://github.com/perl11/cperl/issues/144
+ # (still affecting 5.22.3)
+ if is_cperl && ! [[ -f ~/perl5/perlbrew/perls/$BREWVER/bin/perl ]] ; then
+ ln -s ~/perl5/perlbrew/perls/$BREWVER/bin/cperl ~/perl5/perlbrew/perls/$BREWVER/bin/perl || /bin/true
+ fi
+
+ # can not do 'perlbrew use' in the run_or_err subshell above, or a $()
+ # furthermore some versions of `perlbrew use` return 0 regardless of whether
+ # the perl is found (won't be there unless compilation suceeded, wich *ALSO* returns 0)
+ perlbrew use $BREWVER || /bin/true
+
+ if \
+ ! [[ -x ~/perl5/perlbrew/perls/$BREWVER/bin/perl ]] \
+ || [[ "$( perlbrew use | grep -oP '(?<=Currently using ).+' )" != "$BREWVER" ]]
+ then
echo_err "Unable to switch to $BREWVER - compilation failed...?"
echo_err "$LASTOUT"
exit 1
fi
+# no brewver - this means a travis perl, which means we want to clean up
+# the presently installed libs
+elif [[ "$CLEANTEST" == "true" ]] && [[ "$POISON_ENV" != "true" ]] ; then
+ purge_sitelib
+fi
+
+if [[ "$POISON_ENV" = "true" ]] ; then
+ # create a perlbrew-specific local lib
+ perlbrew lib create travis-local
+ perlbrew use "$( perlbrew use | grep -oP '(?<=Currently using ).+' )@travis-local"
+ echo_err "POISON_ENV active - adding a local lib: $(perlbrew use)"
fi
# configure CPAN.pm - older versions go into an endless loop
*CPAN::FirstTime::conf_sites = sub {};
CPAN::Config->load;
\$CPAN::Config->{urllist} = [qw{ $CPAN_MIRROR }];
- \$CPAN::Config->{halt_on_failure} = 1;
+ \$CPAN::Config->{halt_on_failure} = $( is_cperl && echo -n 0 || echo -n 1 );
CPAN::Config->commit;
"
run_or_err "Configuring CPAN.pm" "perl -e '$CPAN_CFG_SCRIPT'"
+
+
+# These envvars are always set, more *maybe* below
+export DBIC_SHUFFLE_UNORDERED_RESULTSETS=1
+
+# bogus nonexisting DBI_*
+export DBI_DSN="dbi:ODBC:server=NonexistentServerAddress"
+export DBI_DRIVER="ADO"
+
+# some people do in fact set this - boggle!!!
+# it of course won't work before 5.8.4
+if perl -M5.008004 -e 1 &>/dev/null ; then
+ export PERL_STRICTURES_EXTRA=1
+fi
+
+
+# poison the environment
+if [[ "$POISON_ENV" = "true" ]] ; then
+
+ toggle_vars=( MVDT )
+
+ [[ "$CLEANTEST" == "true" ]] && toggle_vars+=( BREAK_CC )
+
+ for var in "${toggle_vars[@]}" ; do
+ if [[ -z "${!var}" ]] ; then
+ export $var=true
+ echo "POISON_ENV: setting $var to 'true'"
+ fi
+ done
+
+ # look through lib, find all mentioned DBIC* ENVvars and set them to true and see if anything explodes
+ toggle_booleans=( $( grep -ohP '\bDBIC_[0-9_A-Z]+' -r lib/ --exclude-dir Optional | sort -u | grep -vP '^(DBIC_TRACE(_PROFILE)?|DBIC_.+_DEBUG)$' ) )
+
+ # some extra pollutants
+ toggle_booleans+=( \
+ DBICTEST_ASSERT_NO_SPURIOUS_EXCEPTION_ACTION \
+ DBICTEST_SQLITE_USE_FILE \
+ DBICTEST_RUN_ALL_TESTS \
+ DBICTEST_SQLITE_REVERSE_DEFAULT_ORDER \
+ )
+
+ # if we have Moose - try to run everything under replicated
+ # FIXME - when switching to Moo kill this
+ if [[ "$CLEANTEST" != "true" ]] && perl -M5.008003 -e 1 &>/dev/null ; then
+ toggle_booleans+=( DBICTEST_VIA_REPLICATED )
+ fi
+
+ for var in "${toggle_booleans[@]}"
+ do
+ if [[ -z "${!var}" ]] ; then
+ export $var=1
+ echo "POISON_ENV: setting $var to 1"
+ fi
+ done
+
+
+### emulate a local::lib-like env
+
+ # trick cpanm into executing true as shell - we just need the find+unpack
+ run_or_err "Downloading latest stable DBIC from CPAN" \
+ "SHELL=/bin/true cpanm --look DBIx::Class"
+
+ # move it somewhere as following cpanm will clobber it
+ run_or_err "Moving latest stable DBIC from CPAN to /tmp" "mv ~/.cpanm/latest-build/DBIx-Class-*/lib /tmp/stable_dbic_lib"
+
+ export PERL5LIB="/tmp/stable_dbic_lib:$PERL5LIB"
+
+ # perldoc -l <mod> searches $(pwd)/lib in addition to PERL5LIB etc, hence the cd /
+ echo_err "Latest stable DBIC (without deps) locatable via \$PERL5LIB at $(cd / && perldoc -l DBIx::Class)"
+fi
+
+if [[ "$CLEANTEST" != "true" ]] ; then
+ # using SQLT if will be available
+ # not doing later because we will be running in a subshell
+ export DBICTEST_SQLT_DEPLOY=1
+
+fi
+
+# FIXME - work around https://github.com/miyagawa/cpanminus/issues/462
+# seriously...
+perl -p -i -e 's/\blocal\$self->\{notest\}=1;//' $(which cpanm)
projects / dbsrgits/DBIx-Class.git / blobdiff