use Sub::Name ();
__PACKAGE__->mk_group_accessors('simple' =>
- qw/_identity _blob_log_on_update _writer_storage _is_writer_storage
+ qw/_identity _blob_log_on_update _writer_storage _is_extra_storage
+ _bulk_storage _is_bulk_storage _began_bulk_work
+ _bulk_disabled_due_to_coderef_connect_info_warned
_identity_method/
);
-my @also_proxy_to_writer_storage = qw/
+my @also_proxy_to_extra_storages = qw/
connect_call_set_auto_cast auto_cast connect_call_blob_setup
connect_call_datetime_setup
bless $self, $no_bind_vars;
$self->_rebless;
} elsif (not $self->_typeless_placeholders_supported) {
-# this is highly unlikely, but we check just in case
+ # this is highly unlikely, but we check just in case
$self->auto_cast(1);
}
}
# create storage for insert/(update blob) transactions,
# unless this is that storage
- return if $self->_is_writer_storage;
+ return if $self->_is_extra_storage;
my $writer_storage = (ref $self)->new;
- $writer_storage->_is_writer_storage(1);
+ $writer_storage->_is_extra_storage(1);
$writer_storage->connect_info($self->connect_info);
$writer_storage->auto_cast($self->auto_cast);
$self->_writer_storage($writer_storage);
+
+# create a bulk storage unless connect_info is a coderef
+ return
+ if (Scalar::Util::reftype($self->_dbi_connect_info->[0])||'') eq 'CODE';
+
+ my $bulk_storage = (ref $self)->new;
+
+ $bulk_storage->_is_extra_storage(1);
+ $bulk_storage->_is_bulk_storage(1); # for special ->disconnect acrobatics
+ $bulk_storage->connect_info($self->connect_info);
+
+# this is why
+ $bulk_storage->_dbi_connect_info->[0] .= ';bulkLogin=1';
+
+ $self->_bulk_storage($bulk_storage);
}
-for my $method (@also_proxy_to_writer_storage) {
+for my $method (@also_proxy_to_extra_storages) {
no strict 'refs';
no warnings 'redefine';
my $replaced = __PACKAGE__->can($method);
- *{$method} = Sub::Name::subname __PACKAGE__."::$method" => sub {
+ *{$method} = Sub::Name::subname $method => sub {
my $self = shift;
$self->_writer_storage->$replaced(@_) if $self->_writer_storage;
+ $self->_bulk_storage->$replaced(@_) if $self->_bulk_storage;
return $self->$replaced(@_);
};
}
+sub disconnect {
+ my $self = shift;
+
+# Even though we call $sth->finish for uses off the bulk API, there's still an
+# "active statement" warning on disconnect, which we throw away here.
+# This is due to the bug described in insert_bulk.
+# Currently a noop because 'prepare' is used instead of 'prepare_cached'.
+ local $SIG{__WARN__} = sub {
+ warn $_[0] unless $_[0] =~ /active statement/i;
+ } if $self->_is_bulk_storage;
+
+# so that next transaction gets a dbh
+ $self->_began_bulk_work(0) if $self->_is_bulk_storage;
+
+ $self->next::method;
+}
+
# Make sure we have CHAINED mode turned on if AutoCommit is off in non-FreeTDS
# DBD::Sybase (since we don't know how DBD::Sybase was compiled.) If however
# we're using FreeTDS, CHAINED mode turns on an implicit transaction which we
my $self = shift;
$self->next::method(@_);
+
+ if ($self->_is_bulk_storage) {
+# this should be cleared on every reconnect
+ $self->_began_bulk_work(0);
+ return;
+ }
if (not $self->using_freetds) {
$self->_dbh->{syb_chained_txn} = 1;
return $wantarray ? @res : $res[0];
}
-### the insert_bulk stuff stolen from DBI/MSSQL.pm
+### the insert_bulk partially stolen from DBI/MSSQL.pm
sub _set_identity_insert {
my ($self, $table, $op) = @_;
# for tests
sub _can_insert_bulk { 1 }
-# XXX this should use the DBD::Sybase bulk API, where possible
sub insert_bulk {
my $self = shift;
my ($source, $cols, $data) = @_;
+ my $identity_col = List::Util::first
+ { $source->column_info($_)->{is_auto_increment} }
+ $source->columns;
+
my $is_identity_insert = (List::Util::first
- { $source->column_info ($_)->{is_auto_increment} }
- (@{$cols})
- )
- ? 1
- : 0;
-
- if ($is_identity_insert) {
- $self->_set_identity_insert ($source->name);
+ { $source->column_info ($_)->{is_auto_increment} }
+ @{$cols}
+ ) ? 1 : 0;
+
+ my @source_columns = $source->columns;
+
+ my $use_bulk_api =
+ $self->_bulk_storage &&
+ $self->_get_dbh->{syb_has_blk};
+
+ if ((not $use_bulk_api) &&
+ (Scalar::Util::reftype($self->_dbi_connect_info->[0])||'') eq 'CODE' &&
+ (not $self->_bulk_disabled_due_to_coderef_connect_info_warned)) {
+ carp <<'EOF';
+Bulk API support disabled due to use of a CODEREF connect_info. Reverting to
+array inserts.
+EOF
+ $self->_bulk_disabled_due_to_coderef_connect_info_warned(1);
}
- $self->next::method(@_);
+ if (not $use_bulk_api) {
+ my $blob_cols = $self->_remove_blob_cols_array($source, $cols, $data);
+
+ my $dumb_last_insert_id =
+ $identity_col
+ && (not $is_identity_insert)
+ && ($self->_identity_method||'') ne '@@IDENTITY';
+
+ ($self, my ($guard)) = do {
+ if ($self->{transaction_depth} == 0 &&
+ ($blob_cols || $dumb_last_insert_id)) {
+ ($self->_writer_storage, $self->_writer_storage->txn_scope_guard);
+ }
+ else {
+ ($self, undef);
+ }
+ };
+
+ $self->_set_identity_insert ($source->name) if $is_identity_insert;
+ $self->next::method(@_);
+ $self->_unset_identity_insert ($source->name) if $is_identity_insert;
+
+ if ($blob_cols) {
+ if ($is_identity_insert) {
+ $self->_insert_blobs_array ($source, $blob_cols, $cols, $data);
+ }
+ else {
+ my @cols_with_identities = (@$cols, $identity_col);
+
+ ## calculate identities
+ # XXX This assumes identities always increase by 1, which may or may not
+ # be true.
+ my ($last_identity) =
+ $self->_dbh->selectrow_array (
+ $self->_fetch_identity_sql($source, $identity_col)
+ );
+ my @identities = (($last_identity - @$data + 1) .. $last_identity);
+
+ my @data_with_identities = map [@$_, shift @identities], @$data;
+
+ $self->_insert_blobs_array (
+ $source, $blob_cols, \@cols_with_identities, \@data_with_identities
+ );
+ }
+ }
- if ($is_identity_insert) {
- $self->_unset_identity_insert ($source->name);
+ $guard->commit if $guard;
+ return;
}
-}
-### end of stolen insert_bulk section
+# otherwise, use the bulk API
+
+# rearrange @$data so that columns are in database order
+ my %orig_idx;
+ @orig_idx{@$cols} = 0..$#$cols;
+
+ my %new_idx;
+ @new_idx{@source_columns} = 0..$#source_columns;
+
+ my @new_data;
+ for my $datum (@$data) {
+ my $new_datum = [];
+ for my $col (@source_columns) {
+# identity data will be 'undef' if not $is_identity_insert
+# columns with defaults will also be 'undef'
+ $new_datum->[ $new_idx{$col} ] =
+ exists $orig_idx{$col} ? $datum->[ $orig_idx{$col} ] : undef;
+ }
+ push @new_data, $new_datum;
+ }
+
+# bcp identity index is 1-based
+ my $identity_idx = exists $new_idx{$identity_col} ?
+ $new_idx{$identity_col} + 1 : 0;
+
+## Set a client-side conversion error handler, straight from DBD::Sybase docs.
+# This ignores any data conversion errors detected by the client side libs, as
+# they are usually harmless.
+ my $orig_cslib_cb = DBD::Sybase::set_cslib_cb(
+ Sub::Name::subname insert_bulk => sub {
+ my ($layer, $origin, $severity, $errno, $errmsg, $osmsg, $blkmsg) = @_;
+
+ return 1 if $errno == 36;
+
+ carp
+ "Layer: $layer, Origin: $origin, Severity: $severity, Error: $errno" .
+ ($errmsg ? "\n$errmsg" : '') .
+ ($osmsg ? "\n$osmsg" : '') .
+ ($blkmsg ? "\n$blkmsg" : '');
+
+ return 0;
+ });
+
+ eval {
+ my $bulk = $self->_bulk_storage;
+
+ my $guard = $bulk->txn_scope_guard;
+
+## XXX get this to work instead of our own $sth
+## will require SQLA or *Hacks changes for ordered columns
+# $bulk->next::method($source, \@source_columns, \@new_data, {
+# syb_bcp_attribs => {
+# identity_flag => $is_identity_insert,
+# identity_column => $identity_idx,
+# }
+# });
+ my $sql = 'INSERT INTO ' .
+ $bulk->sql_maker->_quote($source->name) . ' (' .
+# colname list is ignored for BCP, but does no harm
+ (join ', ', map $bulk->sql_maker->_quote($_), @source_columns) . ') '.
+ ' VALUES ('. (join ', ', ('?') x @source_columns) . ')';
+
+## XXX there's a bug in the DBD::Sybase bulk support that makes $sth->finish for
+## a prepare_cached statement ineffective. Replace with ->sth when fixed, or
+## better yet the version above. Should be fixed in DBD::Sybase .
+ my $sth = $bulk->_get_dbh->prepare($sql,
+# 'insert', # op
+ {
+ syb_bcp_attribs => {
+ identity_flag => $is_identity_insert,
+ identity_column => $identity_idx,
+ }
+ }
+ );
+
+ my $bind_attributes = $self->source_bind_attributes($source);
+
+ foreach my $slice_idx (0..$#source_columns) {
+ my $col = $source_columns[$slice_idx];
+
+ my $attributes = $bind_attributes->{$col}
+ if $bind_attributes && defined $bind_attributes->{$col};
+
+ my @slice = map $_->[$slice_idx], @new_data;
+
+ $sth->bind_param_array(($slice_idx + 1), \@slice, $attributes);
+ }
+
+ $bulk->_query_start($sql);
+
+# this is stolen from DBI::insert_bulk
+ my $tuple_status = [];
+ my $rv = eval { $sth->execute_array({ArrayTupleStatus => $tuple_status}) };
+
+ if (my $err = $@ || $sth->errstr) {
+ my $i = 0;
+ ++$i while $i <= $#$tuple_status && !ref $tuple_status->[$i];
+
+ $self->throw_exception("Unexpected populate error: $err")
+ if ($i > $#$tuple_status);
+
+ $self->throw_exception(sprintf "%s for populate slice:\n%s",
+ ($tuple_status->[$i][1] || $err),
+ $self->_pretty_print ({
+ map { $source_columns[$_] => $new_data[$i][$_] } (0 .. $#$cols)
+ }),
+ );
+ }
+
+ $guard->commit;
+ $sth->finish;
+
+ $bulk->_query_end($sql);
+ };
+ my $exception = $@;
+ if ($exception =~ /-Y option/) {
+ carp <<"EOF";
+
+Sybase bulk API operation failed due to character set incompatibility, reverting
+to regular array inserts:
+
+*** Try unsetting the LANG environment variable.
+
+$@
+EOF
+ $self->_bulk_storage(undef);
+ DBD::Sybase::set_cslib_cb($orig_cslib_cb);
+ unshift @_, $self;
+ goto \&insert_bulk;
+ }
+ elsif ($exception) {
+ DBD::Sybase::set_cslib_cb($orig_cslib_cb);
+# rollback makes the bulkLogin connection unusable
+ $self->_bulk_storage->disconnect;
+ $self->throw_exception($exception);
+ }
+
+ DBD::Sybase::set_cslib_cb($orig_cslib_cb);
+}
# Make sure blobs are not bound as placeholders, and return any non-empty ones
# as a hash.
return keys %blob_cols ? \%blob_cols : undef;
}
+# same for insert_bulk
+sub _remove_blob_cols_array {
+ my ($self, $source, $cols, $data) = @_;
+
+ my @blob_cols;
+
+ for my $i (0..$#$cols) {
+ my $col = $cols->[$i];
+
+ if ($self->_is_lob_type($source->column_info($col)->{data_type})) {
+ for my $j (0..$#$data) {
+ my $blob_val = delete $data->[$j][$i];
+ if (not defined $blob_val) {
+ $data->[$j][$i] = \'NULL';
+ }
+ else {
+ $data->[$j][$i] = \"''";
+ $blob_cols[$j][$i] = $blob_val
+ unless $blob_val eq '';
+ }
+ }
+ }
+ }
+
+ return @blob_cols ? \@blob_cols : undef;
+}
+
sub _update_blobs {
my ($self, $source, $blob_cols, $where) = @_;
}
}
+sub _insert_blobs_array {
+ my ($self, $source, $blob_cols, $cols, $data) = @_;
+
+ for my $i (0..$#$data) {
+ my $datum = $data->[$i];
+
+ my %row;
+ @row{ @$cols } = @$datum;
+
+ my %blob_vals;
+ for my $j (0..$#$cols) {
+ if (exists $blob_cols->[$i][$j]) {
+ $blob_vals{ $cols->[$j] } = $blob_cols->[$i][$j];
+ }
+ }
+
+ $self->_insert_blobs ($source, \%blob_vals, \%row);
+ }
+}
+
=head2 connect_call_datetime_setup
Used as:
sub _dbh_begin_work {
my $self = shift;
+
+# bulkLogin=1 connections are always in a transaction, and can only call BEGIN
+# TRAN once. However, we need to make sure there's a $dbh.
+ return if $self->_is_bulk_storage && $self->_dbh && $self->_began_bulk_work;
+
$self->next::method(@_);
+
if ($self->using_freetds) {
$self->_get_dbh->do('BEGIN TRAN');
}
+
+ $self->_began_bulk_work(1) if $self->_is_bulk_storage;
}
sub _dbh_commit {
See L</connect_call_blob_setup> for a L<DBIx::Class::Storage::DBI/connect_info>
setting you need to work with C<IMAGE> columns.
+=head1 BULK API
+
+The experimental L<DBD::Sybase> Bulk API support is used for
+L<populate|DBIx::Class::ResultSet/populate> in B<void> context, in a transaction
+on a separate connection.
+
+To use this feature effectively, use a large number of rows for each
+L<populate|DBIx::Class::ResultSet/populate> call, eg.:
+
+ while (my $rows = $data_source->get_100_rows()) {
+ $rs->populate($rows);
+ }
+
+B<NOTE:> the L<add_columns|DBIx::Class::ResultSource/add_columns>
+calls in your C<Result> classes B<must> list columns in database order for this
+to work. Also, you may have to unset the C<LANG> environment variable before
+loading your app, if it doesn't match the character set of your database.
+
+When inserting IMAGE columns using this method, you'll need to use
+L</connect_call_blob_setup> as well.
+
=head1 AUTHOR
See L<DBIx::Class/CONTRIBUTORS>.
projects / dbsrgits/DBIx-Class.git / blobdiff