=item *
-":0,$s/^ "
+C<":0,$s/^ ">
Removes four leading spaces from the entire file (from the first line,
C<0>, to the last line, C<$>).
=item *
-"%s/^ "
+C<"%s/^ ">
A shortcut for the previous item (C<%> specifies the entire file; so
this removes four leading spaces from every line).
=item *
-":.,44s/^ "
+C<":.,44s/^ ">
Removes four leading space from the current line through line 44
(obviously adjust the C<44> to the appropriate value in your example).
You can limit the replacement operation by selecting text first (depending
on your version of Emacs, you can either use the mouse or experiment with
commands such as C<C-SPC> to set the mark at the cursor location and
-C<C-E<lt>> and C<C-E<gt>> to set the mark at the beginning and end of the
+C<< C-< >> and C<< C-> >> to set the mark at the beginning and end of the
file respectively.
-Also, Stefan Kangas sent in the following tip about an alternate
-approach using the command C<indent-region> to redo the indentation
-for the currently selected region (adhering to indent rules in the
-current major mode). You can run the command by typing M-x
-indent-region or pressing the default keybinding C-M-\ in cperl-mode.
+Also, Stefan Kangas sent in the following tip about an alternate
+approach using the command C<indent-region> to redo the indentation
+for the currently selected region (adhering to indent rules in the
+current major mode). You can run the command by typing M-x
+indent-region or pressing the default keybinding C-M-\ in cperl-mode.
Additional details can be found here:
L<http://www.gnu.org/software/emacs/manual/html_node/emacs/Indentation-Commands.html>
=head2 PostgreSQL
-Use the following steps to adapt the tutorial to PostgreSQL. Thanks
-to Caelum (Rafael Kitover) for assistance with the most recent
-updates, and Louis Moore, Marcello Romani and Tom Lanyon for help with
+Use the following steps to adapt the tutorial to PostgreSQL. Thanks
+to Caelum (Rafael Kitover) for assistance with the most recent
+updates, and Louis Moore, Marcello Romani and Tom Lanyon for help with
earlier versions.
=over 4
sudo aptitude install postgresql libdbd-pg-perl libdatetime-format-pg-perl
-To configure the permissions, you can open
-C</etc/postgresql/8.3/main/pg_hba.conf> and change this line (near the
+To configure the permissions, you can open
+F</etc/postgresql/8.3/main/pg_hba.conf> and change this line (near the
bottom):
# "local" is for Unix domain socket connections only
=item *
-Create the database and a user for the database (note that we are
-using "E<lt>catalystE<gt>" to represent the hidden password of
+Create the database and a user for the database (note that we are
+using "<catalyst>" to represent the hidden password of
"catalyst"):
$ sudo -u postgres createuser -P catappuser
=item *
-Open the C<myapp01_psql.sql> in your editor and enter:
+Open the F<myapp01_psql.sql> in your editor and enter:
--
-- Drops just in case you are reloading
DROP TABLE IF EXISTS users CASCADE;
DROP TABLE IF EXISTS roles CASCADE;
DROP TABLE IF EXISTS user_roles CASCADE;
-
+
--
-- Create a very simple database to hold book and author information
--
-- created TIMESTAMP NOT NULL DEFAULT now(),
-- updated TIMESTAMP
);
-
+
CREATE TABLE authors (
id SERIAL PRIMARY KEY,
first_name TEXT,
last_name TEXT
);
-
+
-- 'book_authors' is a many-to-many join table between books & authors
CREATE TABLE book_authors (
book_id INTEGER REFERENCES books(id) ON DELETE CASCADE ON UPDATE CASCADE,
author_id INTEGER REFERENCES authors(id) ON DELETE CASCADE ON UPDATE CASCADE,
PRIMARY KEY (book_id, author_id)
);
-
+
---
--- Load some sample data
---
Load the data:
$ psql -U catappuser -W catappdb -f myapp01_psql.sql
- Password for user catappuser:
+ Password for user catappuser:
psql:myapp01_psql.sql:8: NOTICE: CREATE TABLE will create implicit sequence "books_id_seq" for serial column "books.id"
psql:myapp01_psql.sql:8: NOTICE: CREATE TABLE / PRIMARY KEY will create implicit index "books_pkey" for table "books"
CREATE TABLE
$ psql -U catappuser -W catappdb
Password for user catappuser: <catalyst>
Welcome to psql 8.3.7, the PostgreSQL interactive terminal.
-
+
Type: \copyright for distribution terms
\h for help with SQL commands
\? for help with psql commands
\g or terminate with semicolon to execute query
\q to quit
-
+
catappdb=> \dt
List of relations
- Schema | Name | Type | Owner
+ Schema | Name | Type | Owner
--------+--------------+-------+------------
public | authors | table | catappuser
public | book_authors | table | catappuser
public | books | table | catappuser
(3 rows)
-
+
catappdb=> select * from books;
- id | title | rating
+ id | title | rating
----+------------------------------------+--------
1 | CCSP SNRS Exam Certification Guide | 5
2 | TCP/IP Illustrated, Volume 1 | 5
4 | Perl Cookbook | 5
5 | Designing with Web Standards | 5
(5 rows)
-
- catappdb=>
+
+ catappdb=>
=back
After the steps where you:
edit lib/MyApp.pm
-
+
create lib/MyAppDB.pm
-
+
create lib/MyAppDB/Book.pm
-
+
create lib/MyAppDB/Author.pm
-
+
create lib/MyAppDB/BookAuthor.pm
Create the C<.sql> file for the user/roles data:
-Open C<myapp02_psql.sql> in your editor and enter:
+Open F<myapp02_psql.sql> in your editor and enter:
--
-- Add users and roles tables, along with a many-to-many join table
--
-
+
CREATE TABLE users (
id SERIAL PRIMARY KEY,
username TEXT,
last_name TEXT,
active INTEGER
);
-
+
CREATE TABLE roles (
id SERIAL PRIMARY KEY,
role TEXT
);
-
+
CREATE TABLE user_roles (
user_id INTEGER REFERENCES users(id) ON DELETE CASCADE ON UPDATE CASCADE,
role_id INTEGER REFERENCES roles(id) ON DELETE CASCADE ON UPDATE CASCADE,
PRIMARY KEY (user_id, role_id)
);
-
+
--
-- Load up some initial test data
--
- INSERT INTO users (username, password, email_address, first_name, last_name, active)
+ INSERT INTO users (username, password, email_address, first_name, last_name, active)
VALUES ('test01', 'mypass', 't01@na.com', 'Joe', 'Blow', 1);
- INSERT INTO users (username, password, email_address, first_name, last_name, active)
+ INSERT INTO users (username, password, email_address, first_name, last_name, active)
VALUES ('test02', 'mypass', 't02@na.com', 'Jane', 'Doe', 1);
INSERT INTO users (username, password, email_address, first_name, last_name, active)
VALUES ('test03', 'mypass', 't03@na.com', 'No', 'Go', 0);
$ psql -U catappuser -W catappdb -c "select * from users"
Password for user catappuser: <catalyst>
- id | username | password | email_address | first_name | last_name | active
+ id | username | password | email_address | first_name | last_name | active
----+----------+----------+---------------+------------+-----------+--------
1 | test01 | mypass | t01@na.com | Joe | Blow | 1
2 | test02 | mypass | t02@na.com | Jane | Doe | 1
=item *
-Modify C<set_hashed_passwords.pl> to match the following (the only difference
+Modify F<set_hashed_passwords.pl> to match the following (the only difference
is the C<connect> line):
#!/usr/bin/perl
-
+
use strict;
use warnings;
-
+
use MyApp::Schema;
-
+
my $schema = MyApp::Schema->connect('dbi:Pg:dbname=catappdb', 'catappuser', 'catalyst');
-
+
my @users = $schema->resultset('Users')->all;
-
+
foreach my $user (@users) {
$user->password('mypass');
$user->update;
}
-Run the C<set_hashed_passwords.pl> as per the "normal" flow of the
+Run the F<set_hashed_passwords.pl> as per the "normal" flow of the
tutorial:
$ perl -Ilib set_hashed_passwords.pl
=item *
-The Perl C<DBD::MySQL> module
+The Perl L<DBD::MySQL> module
=back
For CentOS users (see
-L<Catalyst::Manual::Installation::CentOS4|Catalyst::Manual::Installation::CentOS4>),
+L<Catalyst::Manual::Installation::CentOS4>),
you can use the following commands to install the software and start the MySQL
daemon:
Enter password:
Welcome to the MySQL monitor. Commands end with ; or \g.
- Type 'help;' or '\h' for help. Type '\c' to clear the current input
+ Type 'help;' or '\h' for help. Type '\c' to clear the current input
statement.
mysql> SHOW VARIABLES LIKE 'have_innodb';
=item *
-Open the C<myapp01_mysql.sql> in your editor and enter:
+Open the F<myapp01_mysql.sql> in your editor and enter:
--
-- Create a very simple database to hold book and author information
Regenerate the model using the Catalyst "_create.pl" script:
script/myapp_create.pl model DB DBIC::Schema MyApp::Schema create=static \
- dbi:mysql:myapp 'tutorial' 'yourpassword' '{ AutoCommit => 1 }'
+ dbi:mysql:myapp 'tutorial' 'yourpassword' '{ AutoCommit => 1 }'
=back
Create the C<.sql> file for the user/roles data:
-Open C<myapp02_mysql.sql> in your editor and enter:
+Open F<myapp02_mysql.sql> in your editor and enter:
--
-- Add users and roles tables, along with a many-to-many join table
Regenerate the model using the Catalyst "_create.pl" script:
script/myapp_create.pl model DB DBIC::Schema MyApp::Schema create=static \
- components=TimeStamp,PassphraseColumn dbi:mysql:myapp 'tutorial' 'yourpassword' '{ AutoCommit => 1 }'
+ components=TimeStamp,PassphraseColumn dbi:mysql:myapp 'tutorial' 'yourpassword' '{ AutoCommit => 1 }'
=back
Create the C<.sql> file for the hashed password data:
-Open C<myapp03_mysql.sql> in your editor and enter:
+Open F<myapp03_mysql.sql> in your editor and enter:
--
-- Convert passwords to SHA-1 hashes
Kennedy Clark, C<hkclark@gmail.com>
-Please report any errors, issues or suggestions to the author. The
-most recent version of the Catalyst Tutorial can be found at
-L<http://dev.catalyst.perl.org/repos/Catalyst/Catalyst-Manual/5.80/trunk/lib/Catalyst/Manual/Tutorial/>.
+Feel free to contact the author for any errors or suggestions, but the
+best way to report issues is via the CPAN RT Bug system at
+L<https://rt.cpan.org/Public/Dist/Display.html?Name=Catalyst-Manual>.
-Copyright 2006-2010, Kennedy Clark, under the
+Copyright 2006-2011, Kennedy Clark, under the
Creative Commons Attribution Share-Alike License Version 3.0
(L<http://creativecommons.org/licenses/by-sa/3.0/us/>).