this has had an appropriate warning for a while now

[gitmo/Moose.git] / lib / Moose / Manual / FAQ.pod

package Moose::Manual::FAQ;

# ABSTRACT: Frequently asked questions about Moose

__END__


=pod

=head1 FREQUENTLY ASKED QUESTIONS

=head2 Module Stability

=head3 Is Moose "production ready"?

Yes! Many sites with household names are using Moose to build
high-traffic services. Countless others are using Moose in production.
See L<http://www.iinteractive.com/moose/about.html#organizations> for
a partial list.

As of this writing, Moose is a dependency of several hundred CPAN
modules. L<http://cpants.perl.org/dist/used_by/Moose>

=head3 Is Moose's API stable?

Yes. The sugary API, the one 95% of users will interact with, is
B<very stable>. Any changes will be B<100% backwards compatible>.

The meta API is less set in stone. We reserve the right to tweak
parts of it to improve efficiency or consistency. This will not be
done lightly. We do perform deprecation cycles. We I<really>
do not like making ourselves look bad by breaking your code.
Submitting test cases is the best way to ensure that your code is not
inadvertently broken by refactoring.

=head3 I heard Moose is slow, is this true?

Again, this one is tricky, so Yes I<and> No.

Firstly, I<nothing> in life is free, and some Moose features do cost
more than others. It is also the policy of Moose to B<only charge you
for the features you use>, and to do our absolute best to not place
any extra burdens on the execution of your code for features you are
not using. Of course using Moose itself does involve some overhead,
but it is mostly compile time. At this point we do have some options
available for getting the speed you need.

Currently we provide the option of making your classes immutable as a
means of boosting speed. This will mean a slightly larger compile time
cost, but the runtime speed increase (especially in object
construction) is pretty significant. This can be done with the
following code:

  MyClass->meta->make_immutable();

=head2 Constructors

=head3 How do I write custom constructors with Moose?

Ideally, you should never write your own C<new> method, and should use
Moose's other features to handle your specific object construction
needs. Here are a few scenarios, and the Moose way to solve them;

If you need to call initialization code post instance construction,
then use the C<BUILD> method. This feature is taken directly from Perl
6. Every C<BUILD> method in your inheritance chain is called (in the
correct order) immediately after the instance is constructed.  This
allows you to ensure that all your superclasses are initialized
properly as well. This is the best approach to take (when possible)
because it makes subclassing your class much easier.

If you need to affect the constructor's parameters prior to the
instance actually being constructed, you have a number of options.

To change the parameter processing as a whole, you can use the
C<BUILDARGS> method. The default implementation accepts key/value
pairs or a hash reference. You can override it to take positional
args, or any other format

To change the handling of individual parameters, there are
I<coercions> (See the L<Moose::Cookbook::Basics::Recipe5> for a
complete example and explanation of coercions). With coercions it is
possible to morph argument values into the correct expected
types. This approach is the most flexible and robust, but does have a
slightly higher learning curve.

=head3 How do I make non-Moose constructors work with Moose?

Usually the correct approach to subclassing a non-Moose class is
delegation.  Moose makes this easy using the C<handles> keyword,
coercions, and C<lazy_build>, so subclassing is often not the ideal
route.

That said, if you really need to inherit from a non-Moose class, see
L<Moose::Cookbook::Basics::Recipe11> for an example of how to do it,
or take a look at L<Moose::Manual::MooseX/"MooseX::NonMoose">.

=head2 Accessors

=head3 How do I tell Moose to use get/set accessors?

The easiest way to accomplish this is to use the C<reader> and
C<writer> attribute options:

  has 'bar' => (
      isa    => 'Baz',
      reader => 'get_bar',
      writer => 'set_bar',
  );

Moose will still take advantage of type constraints, triggers, etc.
when creating these methods.

If you do not like this much typing, and wish it to be a default for
your classes, please see L<MooseX::FollowPBP>. This extension will
allow you to write:

  has 'bar' => (
      isa => 'Baz',
      is  => 'rw',
  );

Moose will create separate C<get_bar> and C<set_bar> methods instead
of a single C<bar> method.

If you like C<bar> and C<set_bar>, see
L<MooseX::SemiAffordanceAccessor>.

NOTE: This B<cannot> be set globally in Moose, as that would break
other classes which are built with Moose. You can still save on typing
by defining a new L<MyApp::Moose> that exports Moose's sugar and then
turns on L<MooseX::FollowPBP>. See
L<Moose::Cookbook::Extending::Recipe4>.

=head3 How can I inflate/deflate values in accessors?

Well, the first question to ask is if you actually need both inflate
and deflate.

If you only need to inflate, then we suggest using coercions. Here is
some basic sample code for inflating a L<DateTime> object:

  class_type 'DateTime';

  coerce 'DateTime'
      => from 'Str'
      => via { DateTime::Format::MySQL->parse_datetime($_) };

  has 'timestamp' => (is => 'rw', isa => 'DateTime', coerce => 1);

This creates a custom type for L<DateTime> objects, then attaches
a coercion to that type. The C<timestamp> attribute is then told
to expect a C<DateTime> type, and to try to coerce it. When a C<Str>
type is given to the C<timestamp> accessor, it will attempt to
coerce the value into a C<DateTime> object using the code in found
in the C<via> block.

For a more comprehensive example of using coercions, see the
L<Moose::Cookbook::Basics::Recipe5>.

If you need to deflate your attribute's value, the current best
practice is to add an C<around> modifier to your accessor:

  # a timestamp which stores as
  # seconds from the epoch
  has 'timestamp' => (is => 'rw', isa => 'Int');

  around 'timestamp' => sub {
      my $next = shift;
      my $self = shift;

      return $self->$next unless @_;

      # assume we get a DateTime object ...
      my $timestamp = shift;
      return $self->$next( $timestamp->epoch );
  };

It is also possible to do deflation using coercion, but this tends to
get quite complex and require many subtypes. An example of this is
outside the scope of this document, ask on #moose or send a mail to
the list.

Still another option is to write a custom attribute metaclass, which
is also outside the scope of this document, but we would be happy to
explain it on #moose or the mailing list.

=head2 Method Modifiers

=head3 How can I affect the values in C<@_> using C<before>?

You can't, actually: C<before> only runs before the main method, and
it cannot easily affect the method's execution.

You similarly can't use C<after> to affect the return value of a
method.

We limit C<before> and C<after> because this lets you write more
concise code. You do not have to worry about passing C<@_> to the
original method, or forwarding its return value (being careful to
preserve context).

The C<around> method modifier has neither of these limitations, but is
a little more verbose.

=head3 Can I use C<before> to stop execution of a method?

Yes, but only if you throw an exception. If this is too drastic a
measure then we suggest using C<around> instead. The C<around> method
modifier is the only modifier which can gracefully prevent execution
of the main method. Here is an example:

    around 'baz' => sub {
        my $next = shift;
        my ($self, %options) = @_;
        unless ($options->{bar} eq 'foo') {
            return 'bar';
        }
        $self->$next(%options);
    };

By choosing not to call the C<$next> method, you can stop the
execution of the main method.

=head3 Why can't I see return values in an C<after> modifier?

As with the C<before> modifier, the C<after> modifier is simply called
I<after> the main method. It is passed the original contents of C<@_>
and B<not> the return values of the main method.

Again, the arguments are too lengthy as to why this has to be. And as
with C<before> I recommend using an C<around> modifier instead.  Here
is some sample code:

  around 'foo' => sub {
      my $next = shift;
      my ($self, @args) = @_;
      my @rv = $next->($self, @args);
      # do something silly with the return values
      return reverse @rv;
  };

=head2 Type Constraints

=head3 How can I provide a custom error message for a type constraint?

Use the C<message> option when building the subtype:

  subtype 'NaturalLessThanTen'
      => as 'Natural'
      => where { $_ < 10 }
      => message { "This number ($_) is not less than ten!" };

This C<message> block will be called when a value fails to pass the
C<NaturalLessThanTen> constraint check.

=head3 Can I turn off type constraint checking?

Not yet. This option may come in a future release.

=head3 My coercions stopped working with recent Moose, why did you break it?

Moose 0.76 fixed a case where Coercions were being applied even if the original constraint passed. This has caused some edge cases to fail where people were doing something like

    subtype Address => as 'Str';
    coerce Address => from Str => via { get_address($_) };

Which is not what they intended. The Type Constraint C<Address> is too loose in this case, it is saying that all Strings are Addresses, which is obviously not the case. The solution is to provide a where clause that properly restricts the Type Constraint.

    subtype Address => as Str => where { looks_like_address($_) };

This will allow the coercion to apply only to strings that fail to look like an Address.

=head2 Roles

=head3 Why is BUILD not called for my composed roles?

C<BUILD> is never called in composed roles. The primary reason is that
roles are B<not> order sensitive. Roles are composed in such a way
that the order of composition does not matter (for information on the
deeper theory of this read the original traits papers here
L<http://www.iam.unibe.ch/~scg/Research/Traits/>).

Because roles are essentially unordered, it would be impossible to
determine the order in which to execute the C<BUILD> methods.

As for alternate solutions, there are a couple.

=over 4

=item *

Using a combination of lazy and default in your attributes to defer
initialization (see the Binary Tree example in the cookbook for a good
example of lazy/default usage L<Moose::Cookbook::Basics::Recipe3>)

=item *

Use attribute triggers, which fire after an attribute is set, to
facilitate initialization. These are described in the L<Moose> docs,
and examples can be found in the test suite.

=back

In general, roles should not I<require> initialization; they should
either provide sane defaults or should be documented as needing
specific initialization. One such way to "document" this is to have a
separate attribute initializer which is required for the role. Here is
an example of how to do this:

  package My::Role;
  use Moose::Role;

  has 'height' => (
      is      => 'rw',
      isa     => 'Int',
      lazy    => 1,
      default => sub {
          my $self = shift;
          $self->init_height;
      }
  );

  requires 'init_height';

In this example, the role will not compose successfully unless the
class provides a C<init_height> method.

If none of those solutions work, then it is possible that a role is
not the best tool for the job, and you really should be using
classes. Or, at the very least, you should reduce the amount of
functionality in your role so that it does not require initialization.

=head3 What are Traits, and how are they different from Roles?

In Moose, a trait is almost exactly the same thing as a role, except
that traits typically register themselves, which allows you to refer
to them by a short name ("Big" vs "MyApp::Role::Big").

In Moose-speak, a I<Role> is usually composed into a I<class> at
compile time, whereas a I<Trait> is usually composed into an instance
of a class at runtime to add or modify the behavior of B<just that
instance>.

Outside the context of Moose, traits and roles generally mean exactly
the same thing. The original paper called them Traits, however Perl 6
will call them Roles.

=head2 Moose and Subroutine Attributes

=head3 Why don't subroutine attributes I inherited from a superclass work?

Currently when you subclass a module, this is done at runtime with the
C<extends> keyword but attributes are checked at compile time by
Perl. To make attributes work, you must place C<extends> in a C<BEGIN>
block so that the attribute handlers will be available at compile time
like this:

  BEGIN { extends qw/Foo/ }

Note that we're talking about Perl's subroutine attributes here, not
Moose attributes:

  sub foo : Bar(27) { ... }

=cut