X-Git-Url: http://git.shadowcat.co.uk/gitweb/gitweb.cgi?p=dbsrgits%2FDBIx-Class.git;a=blobdiff_plain;f=.travis.yml;h=173bdb2463ece8ae894e63f1566b39741699dba3;hp=88c66848b635150575cd3de177efdebf62d7d7eb;hb=63ee8b7896e02ee888eb26251fc28311721832c5;hpb=f2f65c95b32700b37efc1e0641402b31d09d7c13

diff --git a/.travis.yml b/.travis.yml
index 88c6684..173bdb2 100644
--- a/.travis.yml
+++ b/.travis.yml
@@ -6,35 +6,14 @@
 #
 # * Minimum perl officially supported by DBIC is 5.8.3. This *includes* the
 # basic depchain. On failure either attempt to fix it or bring it to the
-# attention of ribasushi. *DO NOT* disable 5.8 testing - it is here for a
-# reason
-#
-# * The matrix is built from two main modes - CLEANTEST = [true|false].
-# - In the first case we test with minimal deps available, and skip everything
-#   listed in DBIC::OptDesps. The modules are installed with classic CPAN
-#   invocations and are *fully tested*. In other words we simulate what would
-#   happen if a user tried to install on a just-compiled virgin perl
-# - Without CLEANTEST we bring the armada of RDBMS and install the maximum
-#   possible set of deps *without testing them*. This ensures we stay within
-#   a reasonable build-time and still run as many of our tests as possible
-#
-# * The perl builds and the DBIC tests run under NUMTHREADS number of threads.
-# The testing of dependencies under CLEANTEST runs single-threaded, at least
-# until we fix our entire dep-chain to safely pass under -j
-#
-# * The way .travis.yml is fed to the command controller is idiotic - it
-# makes using multiline `bash -c` statements impossible. Therefore to
-# aid readability (our travis logic is rather complex), the bulk of
-# functionality is moved to scripts. More about the problem (and the
-# WONTFIX "explanation") here: https://github.com/travis-ci/travis-ci/issues/497
+# attention of the maintainer. *DO NOT* disable 5.8 testing - it is here for
+# a very good reason
 #
+# the entire run times out after 50 minutes, or after 5 minutes without
+# console output
 
 #
 # Smoke all branches except for blocked* and wip/*
-#
-# Additionally master does not smoke with bleadperl
-# ( implemented in maint/travis-ci_scripts/10_before_install.bash )
-#
 branches:
   except:
     - /^wip\//
@@ -52,214 +31,415 @@ notifications:
 
   email:
     recipients:
-      - ribasushi@cpan.org
-      # Temporary - if it proves to be too noisy, we'll shut it off
-      #- dbix-class-devel@lists.scsys.co.uk
+      - CPAN-CI@leporine.io
     on_success: change
     on_failure: always
 
-# FIXME - This stuff is not yet available for free OSS accounts, sadpanda
-# First paragrah on http://about.travis-ci.org/docs/user/caching/
-#cache:
-#  apt: true
-#  directories:
-#    - /var/cache/apt/archives
+addons:
+  apt:
+    packages:
+      - libapp-nopaste-perl
+      - net-tools
 
+# This is probably a net-loss for setup etc - a bare 'C' will likely fare much better
 language: perl
 
-perl:
-  - "5.18"
+# Currently not trying osx: https://github.com/travis-ci/travis-ci/issues/2314
+os: linux
+
+# The defaults run under the more rapid container infra. The hardware is
+# actually *much* slower, but the jobs start much faster, for more info see
+# https://docs.travis-ci.com/user/ci-environment/#Virtualization-environments
+# Combined with 'fast_finish' this will result in an "uh-oh" email as early
+# as possible
+dist: precise
+sudo: false
+env: CLEANTEST=true
 
-env:
-  - CLEANTEST=false
-  - CLEANTEST=true
+perl:
+  - "5.8"
+  - "5.10"
+  - "5.22-extras"
 
 matrix:
+  fast_finish: true
+
   include:
-    # this particular perl is quite widespread
-    - perl: 5.8.8_thr_mb
+
+    # Same as the "master matrix" above, frozen under older dist/infrastructure
+    # In genereal it is strongly recommended to keep things on the older
+    # version indefinitely - there is little value in-depth smoking on
+    # more recent software stacks
+    # Add moderate (not complete) poisoning, as these will run on PR-related
+    # builds, therefore contributors will get notified about *most* issues
+    - perl: "5.8"
+      sudo: required
+      dist: precise
       env:
-        - CLEANTEST=true
-        - BREWOPTS="-Duseithreads -Dusemorebits"
-        - BREWVER=5.8.8
+        - CLEANTEST=false
+        - POISON_ENV=true
 
-    # so is this one (test a sane CPAN.pm)
-    - perl: 5.12.4_thr_mb
+    - perl: "5.10"
+      sudo: required
+      dist: precise
       env:
-        - CLEANTEST=true
-        - BREWOPTS="-Duseithreads -Dusemorebits"
-        - BREWVER=5.12.4
+        - CLEANTEST=false
+        - POISON_ENV=true
 
-    # this is the perl suse ships
-    - perl: 5.10.0_thr_dbg
+    - perl: "5.22-extras"
+      sudo: required
+      dist: precise
       env:
-        - CLEANTEST=true
-        - BREWOPTS="-DDEBUGGING -Duseithreads"
-        - BREWVER=5.10.0
+        - CLEANTEST=false
+        - POISON_ENV=true
 
-    # CLEANTEST of minimum supported
-    - perl: 5.8.3_nt_mb
+    # CLEANTEST of minimum supported with non-tracing poisoning, single thread (hence the sudo)
+    - perl: "5.8.3_nt_mb"
+      sudo: required
+      dist: precise
       env:
+        - VCPU_USE=1
         - CLEANTEST=true
+        - POISON_ENV=true
+        - DBIC_TRACE_PROFILE=console_monochrome
+        - BREWVER=5.8.3
         - BREWOPTS="-Dusemorebits"
+
+    # Full Test of minimum supported without threads with plain poisoned trace
+    - perl: "5.8.3_nt"
+      sudo: required
+      dist: precise
+      # run these under legacy - great simulation of low memory env
+      group: legacy
+      env:
+        - CLEANTEST=false
+        - POISON_ENV=true
+        - DBIC_TRACE=1
         - BREWVER=5.8.3
 
-    # Full Test of minimum supported with threads
-    - perl: 5.8.5_thr
+    # Full Test of minimum supported with threads with non-tracing poisoning
+    - perl: "5.8.5_thr"
+      sudo: required
+      dist: precise
+      # run these under legacy - great simulation of low memory env
+      group: legacy
       env:
         - CLEANTEST=false
-        - BREWOPTS="-Duseithreads"
+        - POISON_ENV=true
+        - DBIC_TRACE_PROFILE=console
         - BREWVER=5.8.5
+        - BREWOPTS="-Duseithreads"
+
+    # CLEANTEST of solaris-like perl with non-tracing poisoning
+    - perl: "5.8.4_nt"
+      sudo: false
+      dist: precise
+      env:
+        - CLEANTEST=true
+        - POISON_ENV=true
         - DBIC_TRACE_PROFILE=console
+        - BREWVER=5.8.4
 
-    # Full Test of minimum supported without threads
-    - perl: 5.8.3_nt
+    # Full test: this particular perl is quite widespread, single thread
+    - perl: "5.8.8_thr"
+      sudo: required
+      dist: precise
+      group: legacy
       env:
+        - VCPU_USE=1
         - CLEANTEST=false
-        - BREWOPTS=""
-        - BREWVER=5.8.3
-        - DBIC_TRACE_PROFILE=console_monochrome
-
-    ###
-    # some permutations of tracing and envvar poisoning
+        - BREWVER=5.8.8
+        - BREWOPTS="-Duseithreads"
 
-    - perl: 5.16.2_thr_mb
+    # CLEANTEST: this is the perl suse ships, with env poisoning
+    - perl: "5.10.0_thr_dbg"
+      sudo: false
+      dist: precise
       env:
-        - CLEANTEST=false
+        - CLEANTEST=true
         - POISON_ENV=true
-        - DBIC_TRACE=1
-        - DBIC_MULTICREATE_DEBUG=0
-        - BREWOPTS="-Duseithreads -Dusemorebits"
-        - BREWVER=5.16.2
+        - BREWVER=5.10.0
+        - BREWOPTS="-DDEBUGGING -Duseithreads"
 
-    - perl: 5.18
+    # CLEANTEST: this one is in a number of debian-based LTS (test a sane CPAN.pm, single thread)
+    - perl: "5.14.2_thr_mb"
+      sudo: required
+      dist: precise
       env:
-        - CLEANTEST=false
-        - POISON_ENV=true
-        - DBIC_TRACE_PROFILE=console
+        - VCPU_USE=1
+        - CLEANTEST=true
+        - BREWVER=5.14.2
+        - BREWOPTS="-Duseithreads -Dusemorebits"
 
-    - perl: 5.8
+    ###
+    # some permutations of tracing and envvar poisoning
+
+    - perl: "5.12.3_thr"
+      sudo: false
+      dist: precise
       env:
         - CLEANTEST=true
         - POISON_ENV=true
         - DBIC_TRACE=1
+        - DBIC_MULTICREATE_DEBUG=1
+        - DBIC_STORAGE_RETRY_DEBUG=1
         - DBIC_TRACE_PROFILE=console
+        - BREWVER=5.12.3
+        - BREWOPTS="-Duseithreads"
+
+    - perl: "5.16.3_thr_mb"
+      sudo: required
+      dist: precise
+      env:
+        - CLEANTEST=false
+        - DBIC_TRACE=1
+        - DBICTEST_VERSION_WARNS_INDISCRIMINATELY=1
+        - BREWVER=5.16.3
+        - BREWOPTS="-Duseithreads -Dusemorebits"
 
-    - perl: 5.18
+    - perl: "5.18-extras"
+      sudo: required
+      # explicit new infra spec preparing for a future forced upgrade
+      dist: trusty
       env:
         - CLEANTEST=false
         - POISON_ENV=true
         - DBIC_TRACE=1
         - DBIC_TRACE_PROFILE=console_monochrome
-        - DBIC_MULTICREATE_DEBUG=0
+        - DBICTEST_VIA_REPLICATED=0
+        - DBICTEST_VERSION_WARNS_INDISCRIMINATELY=1
+
+    # MAKE SURE TO KEEP THE FLAGS IDENTICAL TO CPERL BELOW
+    # allows for easier side-by-side comparison
+    # vcpu=1 for even more stable results
+    - perl: "5.24.0_thr_qm"
+      # explicit new infra spec preparing for a future forced upgrade
+      # also need to pull in a sufficiently new compiler for quadmath.h
+      sudo: required
+      dist: trusty
+      env:
+        - VCPU_USE=1
+        - CLEANTEST=true
+        - POISON_ENV=true
+        - MVDT=false
+        - BREWVER=5.24.0
+        - BREWOPTS="-Duseithreads -Dusequadmath"
 
     ###
     # Start of the allow_failures block
 
-    # old threaded with blead CPAN
-    - perl: devcpan_5.8.7_thr
+    # MAKE SURE TO KEEP THE FLAGS IDENTICAL TO STOCK 5.latest.comparable ABOVE
+    # allows for easier side-by-side comparison
+    # vcpu=1 for even more stable results
+    - perl: "cperl-5.24.0_thr_qm"
+      # explicit new infra spec preparing for a future forced upgrade
+      # also need to pull in a sufficiently new compiler for quadmath.h
+      sudo: required
+      dist: trusty
       env:
+        - VCPU_USE=1
         - CLEANTEST=true
-        - BREWOPTS="-Duseithreads"
-        - BREWVER=5.8.7
-        - DEVREL_DEPS=true
+        - POISON_ENV=true
+        - MVDT=false
+        - BREWVER=cperl-5.24.0
+        - BREWOPTS="-Duseithreads -Dusequadmath"
 
-    # 5.10.0 threaded with blead CPAN
-    - perl: devcpan_5.10.0_thr_mb
+    - perl: "cperl-master_thr"
+      sudo: false
+      dist: precise
+      env:
+        - CLEANTEST=true
+        - POISON_ENV=true
+        - MVDT=false
+        - BREWVER=cperl-master
+        - BREWOPTS="-Duseithreads -Dusedevel"
+
+    # threaded oldest possible with blead CPAN
+    - perl: "devcpan_5.8.1_thr_mb"
+      sudo: false
+      dist: precise
       env:
         - CLEANTEST=true
+        - DEVREL_DEPS=true
+        - BREWVER=5.8.1
         - BREWOPTS="-Duseithreads -Dusemorebits"
-        - BREWVER=5.10.0
+
+    # oldest possible with blead CPAN with poisoning and plain trace
+    - perl: "devcpan_5.8.1"
+      sudo: false
+      dist: precise
+      env:
+        - CLEANTEST=true
         - DEVREL_DEPS=true
+        - POISON_ENV=true
+        - DBIC_TRACE=1
+        - DBICTEST_VERSION_WARNS_INDISCRIMINATELY=1
+        - BREWVER=5.8.1
+
+    # 5.8.3 with blead CPAN
+    - perl: "devcpan_5.8.3_mb"
+      sudo: required
+      # explicit new infra spec preparing for a future forced upgrade
+      dist: trusty
+      env:
+        - CLEANTEST=false
+        - DEVREL_DEPS=true
+        - BREWVER=5.8.3
+        - BREWOPTS="-Dusemorebits"
 
-    # 5.12.2 with blead CPAN
-    - perl: devcpan_5.12.2_thr
+    # 5.8.7 threaded with blead CPAN with non-tracing poisoning
+    - perl: "devcpan_5.8.7_thr"
+      sudo: false
+      dist: precise
       env:
         - CLEANTEST=true
+        - DEVREL_DEPS=true
+        - POISON_ENV=true
+        - BREWVER=5.8.7
         - BREWOPTS="-Duseithreads"
-        - BREWVER=5.12.2
+
+    # 5.8.8 threaded MB (exercises P5#72210)
+    - perl: "devcpan_5.8.8_thr_mb"
+      sudo: false
+      dist: precise
+      env:
+        - CLEANTEST=true
+        - DBICTEST_VERSION_WARNS_INDISCRIMINATELY=1
         - DEVREL_DEPS=true
+        - BREWVER=5.8.8
+        - BREWOPTS="-Duseithreads -Dusemorebits"
 
-    # recentish threaded stable with blead CPAN
-    - perl: devcpan_5.18.2_thr_mb
+    # 5.10.0 threaded with blead CPAN
+    - perl: "devcpan_5.10.0_thr_mb"
+      sudo: false
+      dist: precise
       env:
-        - CLEANTEST=false
+        - CLEANTEST=true
+        - DEVREL_DEPS=true
+        - BREWVER=5.10.0
         - BREWOPTS="-Duseithreads -Dusemorebits"
-        - BREWVER=5.18.2
+
+    # 5.12.1 with blead CPAN
+    - perl: "devcpan_5.12.1_thr"
+      sudo: false
+      dist: precise
+      env:
+        - CLEANTEST=true
         - DEVREL_DEPS=true
+        - BREWVER=5.12.1
+        - BREWOPTS="-Duseithreads"
 
-    # bleadperl with stock CPAN, full depchain test
-    - perl: bleadperl
+    # bleadperl with stock CPAN, full depchain test with non-tracing poisoning, single thread
+    - perl: "bleadperl"
+      sudo: required
+      dist: precise
       env:
+        - VCPU_USE=1
         - CLEANTEST=true
+        - POISON_ENV=true
         - BREWVER=blead
 
-    # bleadperl with blead CPAN
-    - perl: devcpan_bleadperl_thr_mb
+    # bleadperl with blead CPAN, single thread
+    - perl: "devcpan_bleadperl_thr_mb"
+      sudo: required
+      # explicitly do not specify dist - see what the default does
       env:
+        - VCPU_USE=1
         - CLEANTEST=false
-        - BREWOPTS="-Duseithreads -Dusemorebits"
-        - BREWVER=blead
         - DEVREL_DEPS=true
+        - BREWVER=blead
+        - BREWOPTS="-Duseithreads -Dusemorebits"
 
+    # CLEANTEST of http://schplog.schmorp.de/2015-06-06-a-stable-perl.html with non-tracing poisoning
+    - perl: "schmorp_stableperl_thr_mb"
+      sudo: false
+      dist: precise
+      env:
+        - CLEANTEST=true
+        - POISON_ENV=true
+        - BREWVER=schmorp_stableperl
+        - BREWOPTS="-Duseithreads -Dusemorebits"
 
   # which ones of the above can fail
   allow_failures:
-    # disable until RT#92413 is fixed
-    - perl: 5.8
 
     # these run with various dev snapshots - allowed to fail
+    - perl: cperl-5.24.0_thr_qm
+    - perl: cperl-master_thr
+    - perl: devcpan_5.8.1_thr_mb
+    - perl: devcpan_5.8.1
+    - perl: devcpan_5.8.3_mb
     - perl: devcpan_5.8.7_thr
+    - perl: devcpan_5.8.8_thr_mb
     - perl: devcpan_5.10.0_thr_mb
-    - perl: devcpan_5.12.2_thr
-    - perl: devcpan_5.18.2_thr_mb
+    - perl: devcpan_5.12.1_thr
     - perl: bleadperl
     - perl: devcpan_bleadperl_thr_mb
+    - perl: schmorp_stableperl_thr_mb
 
 
-# sourcing the files is *EXTREMELY* important - otherwise
-# no envvars will survive
-
-# the entire run times out after 50 minutes, or after 5 minutes without
-# console output
+###
+### For the following two phases -e is *set*
+###
 
 before_install:
+  # common functions for all run phases below
+  #
+  # this is an exporter - sourcing it is crucial
+  # among other things it also sets -e
+  #
+  - source maint/travis-ci_scripts/common.bash
+
   # Sets global envvars, downloads/configures debs based on CLEANTEST
   # Sets extra DBICTEST_* envvars
   #
+  # this is an exporter - sourcing it is crucial
+  #
   - source maint/travis-ci_scripts/10_before_install.bash
 
 install:
   # Build and switch to a custom perl if requested
   # Configure the perl env, preinstall some generic toolchain parts
+  # Possibly poison the environment
+  #
+  # this is an exporter - sourcing it is crucial
   #
   - source maint/travis-ci_scripts/20_install.bash
 
+###
+### From this point on -e is *unset*, rely on travis' error handling
+###
+  - set +e
+
 before_script:
   # Preinstall/install deps based on envvars/CLEANTEST
   #
-  - source maint/travis-ci_scripts/30_before_script.bash
+  # need to invoke the after_failure script manually
+  # because 'after_failure' runs only after 'script' fails
+  #
+  - maint/getstatus maint/travis-ci_scripts/30_before_script.bash
 
 script:
   # Run actual tests
   #
-  - source maint/travis-ci_scripts/40_script.bash
+  - maint/getstatus maint/travis-ci_scripts/40_script.bash
+
+###
+### Set -e back, work around https://github.com/travis-ci/travis-ci/issues/3533
+###
+  - set -e
 
 after_success:
   # Check if we can assemble a dist properly if not in CLEANTEST
   #
-  - source maint/travis-ci_scripts/50_after_success.bash
+  - maint/getstatus maint/travis-ci_scripts/50_after_success.bash || ( maint/travis-ci_scripts/50_after_failure.bash && /bin/false )
 
 after_failure:
-  # No tasks yet
+  # Final sysinfo printout on fail
   #
-  #- source maint/travis-ci_scripts/50_after_failure.bash
+  - maint/getstatus maint/travis-ci_scripts/50_after_failure.bash
 
 after_script:
   # No tasks yet
   #
-  #- source maint/travis-ci_scripts/60_after_script.bash
-
-  # if we do not unset this before we terminate the travis teardown will
-  # mark the entire job as failed
-  - set +e
+  #- maint/getstatus maint/travis-ci_scripts/60_after_script.bash