Catalyst::Upgrading - Instructions for upgrading to the latest Catalyst
-=head1 Upgrading to Catalyst 5.90
-
-The major change is that L<Plack> now replaces most of the subclasses of
-L<Catalyst::Engine>. If you are using one of the standard subclasses of
-L<Catalyst::Engine> this should be a straightforward upgrade for you. It was
-a design goal for this release to be as backwardly compatible as possible.
-However since L<Plack> is different from L<Catalyst::Engine> it would be
-possible that edge case differences would exist. Therefore we recommend care
-be taken with this upgrade and that testing should be greater than would be
-the case with a minor point update.
-
-It is highly recommended that you become familar with the L<Plack> ecosystem
+=head1 Upgrading to Catalyst 5.90080
+
+UTF8 encoding is now default. For temporary backwards compatibility, if this
+change is causing you trouble, you can disable it by setting the application
+configuration option to undef:
+
+ MyApp->config(encoding => undef);
+
+But please consider this a temporary measure since it is the intention that
+UTF8 is enabled going forwards and the expectation is that other ecosystem
+projects will assume this as well. At some point you application will not
+correctly function without this setting.
+
+As of 5.90084 we've added two additional configuration flags for more selective
+control over some encoding changes: 'skip_body_param_unicode_decoding' and
+'skip_complex_post_part_handling'. You may use these to more selectively
+disable new features while you are seeking a long term fix. Please review
+CONFIGURATION in L<Catalyst>.
+
+For further information, please see L<Catalyst::UTF8>
+
+A number of projects in the wider ecosystem required minor updates to be able
+to work correctly. Here's the known list:
+
+L<Catalyst::View::TT>, L<Catalyst::View::Mason>, L<Catalyst::View::HTML::Mason>,
+L<Catalyst::View::Xslate>, L<Test::WWW::Mechanize::Catalyst>
+
+You will need to update to modern versions in most cases, although quite a few
+of these only needed minor test case and documentation changes so you will need
+to review the changelog of each one that is relevant to you to determine your
+true upgrade needs.
+
+=head1 Upgrading to Catalyst 5.90060
+
+Starting in the v5.90059_001 development release, the regexp dispatch type is
+no longer automatically included as a dependency. If you are still using this
+dispatch type, you need to add L<Catalyst::DispatchType::Regex> into your build
+system.
+
+The standalone distribution of Regexp will be supported for the time being, but
+should we find that supporting it prevents us from moving L<Catalyst> forward
+in necessary ways, we reserve the right to drop that support. It is highly
+recommended that you use this last stage of deprecation to change your code.
+
+=head1 Upgrading to Catalyst 5.90040
+
+=head2 Catalyst::Plugin::Unicode::Encoding is now core
+
+The previously stand alone Unicode support module L<Catalyst::Plugin::Unicode::Encoding>
+has been brought into core as a default plugin. Going forward, all you need is
+to add a configuration setting for the encoding type. For example:
+
+ package Myapp::Web;
+
+ use Catalyst;
+
+ __PACKAGE__->config( encoding => 'UTF-8' );
+
+Please note that this is different from the old stand alone plugin which applied
+C<UTF-8> encoding by default (that is, if you did not set an explicit
+C<encoding> configuration value, it assumed you wanted UTF-8). In order to
+preserve backwards compatibility you will need to explicitly turn it on via the
+configuration setting. THIS MIGHT CHANGE IN THE FUTURE, so please consider
+starting to test your application with proper UTF-8 support and remove all those
+crappy hacks you munged into the code because you didn't know the Plugin
+existed :)
+
+For people that are using the Plugin, you will note a startup warning suggesting
+that you can remove it from the plugin list. When you do so, please remember to
+add the configuration setting, since you can no longer rely on the default being
+UTF-8. We'll add it for you if you continue to use the stand alone plugin and
+we detect this, but this backwards compatibility shim will likely be removed in
+a few releases (trying to clean up the codebase after all).
+
+If you have trouble with any of this, please bring it to the attention of the
+Catalyst maintainer group.
+
+=head2 basic async and event loop support
+
+This version of L<Catalyst> offers some support for using L<AnyEvent> and
+L<IO::Async> event loops in your application. These changes should work
+fine for most applications however if you are already trying to perform
+some streaming, minor changes in this area of the code might affect your
+functionality. Please see L<Catalyst::Response\write_fh> for more and for a
+basic example.
+
+We consider this feature experimental. We will try not to break it, but we
+reserve the right to make necessary changes to fix major issues that people
+run into when the use this functionality in the wild.
+
+=head1 Upgrading to Catalyst 5.90030
+
+=head2 Regex dispatch type is deprecated.
+
+The Regex dispatchtype (L<Catalyst::DispatchType::Regex>) has been deprecated.
+
+You are encouraged to move your application to Chained dispatch (L<Catalyst::DispatchType::Chained>).
+
+If you cannot do so, please add a dependency to Catalyst::DispatchType::Regex to your application's
+Makefile.PL
+
+=head1 Upgrading to Catalyst 5.9
+
+The major change is that L<Plack>, a toolkit for using the L<PSGI>
+specification, now replaces most of the subclasses of L<Catalyst::Engine>. If
+you are using one of the standard subclasses of L<Catalyst::Engine> this
+should be a straightforward upgrade for you. It was a design goal for
+this release to preserve as much backwards compatibility as possible.
+However, since L<Plack> is different from L<Catalyst::Engine>, it is
+possible that differences exist for edge cases. Therefore, we recommend
+that care be taken with this upgrade and that testing should be greater
+than would be the case with a minor point update. Please inform the
+Catalyst developers of any problems so that we can fix them and
+incorporate tests.
+
+It is highly recommended that you become familiar with the L<Plack> ecosystem
and documentation. Being able to take advantage of L<Plack> development and
middleware is a major bonus to this upgrade. Documentation about how to
take advantage of L<Plack::Middleware> by writing your own C<< .psgi >> file
is contained in L<Catalyst::PSGI>.
-If you have created a custom subclass of L<Catalyst:Engine> you will need to
-convert it to be a subclass of L<Plack::Handler>.
+If you have created a custom subclass of L<Catalyst:Engine>, you will
+need to convert it to be a subclass of L<Plack::Handler>.
If you are using the L<Plack> engine, L<Catalyst::Engine::PSGI>, this new
-release supercedes that code.
+release supersedes that code.
-If you are using a subclass of L<Catalyst::Engine> that is aimed at nonstandard
-or internal / testing uses, such as L<Catalyst::Engine::Embeddable> you should
-still be able to continue using that engine.
+If you are using a subclass of L<Catalyst::Engine> that is aimed at
+nonstandard or internal/testing uses, such as
+L<Catalyst::Engine::Embeddable>, you should still be able to continue
+using that engine.
Advice for specific subclasses of L<Catalyst::Engine> follows:
=head2 Upgrading the FastCGI Engine
-No upgrade needed if your myapp_fastcgi.pl script is already upgraded
-enough to use L<Catalyst::Script::FastCGI>.
+No upgrade is needed if your myapp_fastcgi.pl script is already upgraded
+to use L<Catalyst::Script::FastCGI>.
=head2 Upgrading the mod_perl / Apache Engines
-The engines that are build upon the various iterations of mod_perl,
-L<Catalyst::Engine::Apache::MP13> and
-L<Catalyst::Engine::Apache2::MP20> should be seemless upgrades and will
-work using using L<Plack::Handler::Apache1> or L<Plack::Handler::Apache2>
-as required.
+The engines that are built upon the various iterations of mod_perl,
+L<Catalyst::Engine::Apache::MP13> (for mod_perl 1, and Apache 1.x) and
+L<Catalyst::Engine::Apache2::MP20> (for mod_perl 2, and Apache 2.x),
+should be seamless upgrades and will work using L<Plack::Handler::Apache1>
+or L<Plack::Handler::Apache2> as required.
-L<Catalyst::Engine::Apache2::MP19>, is however no longer supported, as Plack
-does not support mod_perl version 1.99??? FIXME - is this true?
+L<Catalyst::Engine::Apache2::MP19>, however, is no longer supported, as
+Plack does not support mod_perl version 1.99. This is unlikely to be a
+problem for anyone, as 1.99 was a brief beta-test release for mod_perl
+2, and all users of mod_perl 1.99 are encouraged to upgrade to a
+supported release of Apache 2 and mod_perl 2.
=head2 Upgrading the HTTP Engine
=head2 Upgrading the CGI Engine
If you were using L<Catalyst::Engine::CGI> there is no upgrade needed if your
-myapp_cgi.pl script is already upgraded enough to use L<Catalyst::Script::CGI>.
+myapp_cgi.pl script is already upgraded to use L<Catalyst::Script::CGI>.
-=head2 Upgrading the Preforking Engine
+=head2 Upgrading Catalyst::Engine::HTTP::Prefork
If you were using L<Catalyst::Engine::HTTP::Prefork> then L<Starman>
-is automatically loaded.
+is automatically loaded. You should (at least) change your C<Makefile.PL>
+to depend on Starman.
+
+You can regenerate your C<myapp_server.pl> script with C<catalyst.pl>
+and implement a C<MyApp::Script::Server> class that looks like this:
+
+ package MyApp::Script::Server;
+ use Moose;
+ use namespace::autoclean;
-XXX FIXME - note how to run Starman with different options.
+ extends 'CatalystX::Script::Server::Starman';
+
+ 1;
+
+This takes advantage of the new script system, and will add a number of
+options to the standard server script as extra options are added by
+Starman.
+
+More information about these options can be seen at
+L<CatalystX::Script::Server::Starman/SYNOPSIS>.
+
+An alternate route to implement this functionality is to write a simple .psgi
+file for your application, and then use the L<plackup> utility to start the
+server.
=head2 Upgrading the PSGI Engine
-If you were using L<Catalyst::Engine::PSGI> this new release supercedes this
-engine in supporting L<Plack>. By default the Engine is now always L<Plack>.
-As a result, you can stop depending on L<Catalyst::Engine::PSGI> in your
-C<Makefile.PL>.
+If you were using L<Catalyst::Engine::PSGI>, this new release supersedes
+this engine in supporting L<Plack>. By default the Engine is now always
+L<Plack>. As a result, you can remove the dependency on
+L<Catalyst::Engine::PSGI> in your C<Makefile.PL>.
Applications that were using L<Catalyst::Engine::PSGI>
previously should entirely continue to work in this release with no changes.
-However, if you have an C<app.psgi> script, then you no longer
-need to specify the PSGI engine. Instead, the L<Catalyst> application class
-now has a new method C<psgi_app> which returns a L<PSGI> compatible coderef
-which you can wrap in middleware of your choice.
+However, if you have an C<app.psgi> script, then you no longer need to
+specify the PSGI engine. Instead, the L<Catalyst> application class now
+has a new method C<psgi_app> which returns a L<PSGI> compatible coderef
+which you can wrap in the middleware of your choice.
Catalyst will use the .psgi for your application if it is located in the C<home>
-directory of the application
+directory of the application.
For example, if you were using L<Catalyst::Engine::PSGI> in the past, you will
have written (or generated) a C<script/myapp.psgi> file similar to this one:
becomes
- MyCatalystApp->setup_engine('PSGI');
my $app = MyCatalystApp->psgi_app(@_);
B<NOT>:
my $app = sub { MyCatalystApp->psgi_app(@_) };
# If you make ^^ this mistake, your app won't work, and will confuse the hell out of you!
-You can now rename C<< script/myapp.psgi >> to C<< myapp.psgi >>, and the built-in
-Catalyst scripts, and your test suite will start using your .psgi file.
+You can now move C<< script/myapp.psgi >> to C<< myapp.psgi >>, and the built-in
+Catalyst scripts and your test suite will start using your .psgi file.
-B<NOTE:> If you rename your .psgi file without these modifications, then any tests run via
-L<Catalyst::Test> will not be compatible with the new release, and will result in
-the development server starting, rather than the expected test running.
+B<NOTE:> If you rename your .psgi file without these modifications, then
+any tests run via L<Catalyst::Test> will not be compatible with the new
+release, and will result in the development server starting, rather than
+the expected test running.
-=head2 Engines which are known broken
+B<NOTE:> If you are directly accessing C<< $c->req->env >> to get the PSGI
+environment then this accessor is moved to C<< $c->engine->env >>,
+you will need to update your code.
-The following engines B<DO NOT> work as of Catalyst version 5.90. The core
-team is extremely happy to work with the developers and/or users of these
-engines to help them port to the new Plack/Engine system, however applications
-which are currently using these engines B<WILL NOT> run without modification
-to the engine code.
+=head2 Engines which are known to be broken
+
+The following engines B<DO NOT> work as of Catalyst version 5.9. The
+core team will be happy to work with the developers and/or users of
+these engines to help them port to the new Plack/Engine system, but for
+now, applications which are currently using these engines B<WILL NOT>
+run without modification to the engine code.
=over
=head2 Engines with unknown status
-The following engines have untested or unknown compatibility. Reports are
-highly welcomed:
+The following engines are untested or have unknown compatibility.
+Reports are highly encouraged:
=over
=item Catalyst::Engine::Mojo
-=item Catalyst::Engine::Server (Marked as Deprecated)
+=item Catalyst::Engine::Server (marked as Deprecated)
-=item Catalyst::Engine::HTTP::POE (Marked as Deprecated)
+=item Catalyst::Engine::HTTP::POE (marked as Deprecated)
=back
-=head2 Using middleware
+=head2 Plack functionality
+
+See L<Catalyst::PSGI>.
+
+=head2 Tests in 5.9
-XXX Should this be here or elsewhere?
+Tests should generally work the same in Catalyst 5.9, but there are
+some differences.
-=head2 Making an app.psgi file
+Previously, if using L<Catalyst::Test> and doing local requests (against
+a local server), if the application threw an exception then this
+exception propagated into the test.
-=head2 Running with plackup?
+This behavior has been removed, and now a 500 response will be returned
+to the test. This change standardizes behavior, so that local test
+requests behave similarly to remote requests.
=head1 Upgrading to Catalyst 5.80
is using deprecated code, or relying on side effects, then you could have
issues upgrading to this release.
-Most issues found with pre-existing components have been easy to
+Most issues found with existing components have been easy to
solve. This document provides a complete description of behavior changes
which may cause compatibility issues, and of new Catalyst warnings which
-be unclear.
+might be unclear.
If you think you have found an upgrade-related issue which is not covered in
this document, please email the Catalyst list to discuss the problem.
You can only apply method modifiers after the application's C<< ->setup >>
method has been called. This means that modifiers will not work with methods
-which run during the call to C<< ->setup >>.
+run during the call to C<< ->setup >>.
See L<Catalyst::Manual::ExtendingCatalyst> for more information about using
L<Moose> in your applications.
to resolve methods using C3, rather than the unpredictable dispatch
order of L<NEXT>.
-This issue is characterised by your application failing to start due to an
+This issue manifests itself by your application failing to start due to an
error message about having a non-linear @ISA.
The Catalyst plugin most often causing this is
To be able to generate a linear @ISA, the list of superclasses for each
class must be resolvable using the C3 algorithm. Unfortunately, when
superclasses are being used as mixins (to add functionality used in your class),
-and with multiple inheritence, it is easy to get this wrong.
+and with multiple inheritance, it is easy to get this wrong.
Most common is the case of:
use Test::More;
isnt(BaseClass->can('foo'), Child->can('foo'));
-=head2 Extending Catalyst::Request or other classes in an ad-hoc manner using mk_accessors
+=head2 Extending Catalyst::Request or other classes in an ad hoc manner using mk_accessors
Previously, it was possible to add additional accessors to Catalyst::Request
(or other classes) by calling the mk_accessors class method.
COMPONENT method you would like to inherit is the first (left-hand most)
COMPONENT method in your @ISA.
+=head2 Development server relying on environment variables
+
+Previously, the development server would allow propagation of system
+environment variables into the request environment, this has changed with the
+adoption of Plack. You can use L<Plack::Middleware::ForceEnv> to achieve the
+same effect.
+
=head1 WARNINGS
=head2 Actions in your application class
Having actions in your application class will now emit a warning at application
startup as this is deprecated. It is highly recommended that these actions are moved
into a MyApp::Controller::Root (as demonstrated by the scaffold application
-generated by catalyst.pl).
+generated by catalyst.pl).
This warning, also affects tests. You should move actions in your test,
creating a myTest::Controller::Root, like the following example:
sub action : Local {
my ( $self, $c ) = @_;
- $c->do_something;
+ $c->do_something;
}
1;
The first time one of these methods is called, a warning will be emitted:
Class $class is calling the deprecated method Catalyst::Dispatcher::$public_method_name,
- this will be removed in Catalyst 5.9X
+ this will be removed in Catalyst 5.9
You should B<NEVER> be calling any of these methods from application code.
projects / catagits/Catalyst-Runtime.git / blobdiff