update README.mkdn

[catagits/Catalyst-Runtime.git] / lib / Catalyst / Delta.pod

=head1 NAME

Catalyst::Delta - Overview of changes between versions of Catalyst

=head1 DESCRIPTION

This is an overview of the user-visible changes to Catalyst between major
Catalyst releases.

=head2 VERSION 5.90105

This version primarily fixed a regression in the way we preserved $c->state
which the previous version introduced.  Now in the case when you forward to
an action, should that action throw an exception it sets state to 0 and is
sure that the return value is false.  This is to meet expected behavior based
on the documentation.  If you relied on the last update behavior you may not have
regressions but it was thought that we should make the code behave as documented
for more than 10 years.

We also changed how we compose the request, response and stats base class.  We
now compose the base class with any configured traits once at the end of the
application setup, rather than for each request.  This reduced request overhead
when you are composing lots of traits.  It possible this may break some code that
was adding traits after the application setup was finalized.  Please shout out if
this actually causes you trouble and we'll do the best to accommodate.

=head2 VERSION 5.90102 - 5.90103

A significant change is that we now preserve the value of $c->state from action
to following action.  This gives you a new way to pass a value between actions
in a chain, for example.   However any 'auto' actions always have $c->state
forced to be set to 0, which is the way its been for a long time, this way an
auto action is required to return 1 to pass the match.  It also exists to maintain
compatibility with anyone that exits an auto action with a detach (which is not a
documented way to escape matching, but exists in the wild since it worked as a
side effect of the code for a long time).

Additionally, upon $c->detach we also force set state to 0.

Version 5.90102 contains a version of this change but its considered buggy, so
that is a version to avoid.

=head2 VERSION 5.90100

Support for type constraints in Args and CaptureArgs has been improved.  You may
now inherit from a base controller that declares type constraints and use roles
that declare type constraints.  See L<Catalyst::RouteMatching> for more.

You may now. also use a full type constraint namespace instead of importing type
constraints into your package namespace.

We changed the way the middleware stash works so that it no longer localizes
the PSGI env hashref.  This was done to fix bugs where people set PSGI ENV hash
keys and found them to disappear in certain cases.  It also means that now if
a sub applications sets stash variables, that stash will now bubble up to the
parent application.  This may be a breaking change for you since previous
versions of this code did not allow that.  A workaround is to explicitly delete
stash keys in your sub application before returning control to the parent
application.

=head2 VERSION 5.90097

=head3 Defined how $c->uri_for adds a URI fragment.

We now have a specification for creating URIs with fragments (or HTML anchors).
Previously you could do this as a side effect of how we create URIs but this
side effect behavior was never documented or tested, and was broken when we
introduced default UTF-8 encoding.  When creating URIs with fragments please
follow the new, supported specification:

    $c->uri_for($action_or_path, \@captures_or_args, @args, \$query, \$fragment);

This will be a breaking change for some codebases, we recommend testing if
you are creating URLs with fragments.

B<NOTE> If you are using the alternative:

    $c->uri_for('/foo/bar#baz')

construction, we do not attempt to encode this and it will make a URL with a
fragment of 'baz'.

=head2 VERSION 5.90094

=head3 Multipart form POST with character set headers

When we did the UTF8 work, we punted on Form POSTs when the POST envelope was
multipart and each part had complex headers such as content-types, character
sets and so forth.  In those cases instead of returning a possibly incorrect
value, we returned an object describing the part so that you could figure it
out manually.  This turned out to be a bad workaround as people did not expect
to find that object.  So we changed this to try much harder to get a correct
value.  We still return an object if we fail but we try much harder now.  If
you used to check for the object you might find that code is no longer needed
(although checking for it should not hurt or break anything either).

=head2 VERSION 5.90091

=head3 'case_sensitive' configuration

At one point in time we allowed you to set a 'case_sensitive' configuration value so
that you could find actions by their private names using mixed case.  We highly
discourage that.  If you are using this 'feature' you should be on notice that we
plan to remove the code around it in the near future.

=head2 VERSION 5.90090+

=head3 Type constraints on Args and CaptureArgs.

You may now use a type constraint (using L<Moose>, L<MooseX::Types> or preferably
L<Type::Tiny> in your Args or CaptureArgs action attributes.  This can be used
to restrict the value of the Arg.  For example:

    sub myaction :Local Args(Int) { ... }

Would match '.../myaction/5' but not '.../myaction/string'.

When an action (or action chain) has Args (or CaptureArgs) that declare type constraints
your arguments to $c->uri_for(...) must match those constraints.

See L<Catalyst::RouteMatching> for more.

=head3 Move CatalystX::InjectComponent into core

L<Catalyst::Utils> has a new method 'inject_component' which works the same as the method of
the same name in L<CatalystX::InjectComponent>.

=head3 inject_components

New configuration key allows you to inject components directly into your application without
any subclasses.  For example:

    MyApp->config({
      inject_components => {
        'Controller::Err' => { from_component => 'Local::Controller::Errors' },
        'Model::Zoo' => { from_component => 'Local::Model::Foo' },
        'Model::Foo' => { from_component => 'Local::Model::Foo', roles => ['TestRole'] },
      },
      'Controller::Err' => { a => 100, b=>200, namespace=>'error' },
      'Model::Zoo' => { a => 2 },
      'Model::Foo' => { a => 100 },
    });

Injected components are useful to reduce the amount of nearly empty boilerplate classes
you might have, particularly when first starting an application.

=head3 Component setup changes.

Previously you could not depend on an application scoped component doing setup_components
since components were setup 'in order'.  Now all components are first registered and then
setup, so you can now reliably use any component doing setup_components.

=head2 VERSION 5.90080+

The biggest change in this release is that UTF8 encoding is now enabled by
default.  So you no longer need any plugins (such as L<Catalyst::Plugin::Unicode::Encoding>)
which you can just no go ahead and remove.  You also don't need to set
the encoding configuration (__PACKAGE__->config(encoding=>'UTF-8')) anymore
as well (although its presence hurts nothing).

If this change causes you trouble, you can disable it:

    __PACKAGE__->config(encoding=>undef);

For further information, please see L<Catalyst::UTF8>

But please report bugs.  You will find that a number of common Views have been
updated for this release (such as L<Catalyst::View::TT>).  In all cases that the
author is aware of these updates were to fix test cases only.  You shouldn't
need to update unless you are installing fresh and want tests to pass.

L<Catalyst::Plugin::Compress> was updated to be compatible with this release.
You will need to upgrade if you are using this plugin.  L<Catalyst::Upgrading>
also has details.

A small change is that the configuration setting C<using_frontend_proxy>
was not doing the right thing if you started your application with C<psgi_app>
and did not apply the default middleware.  This setting is now honored in
all the ways an application may be started.  This could cause trouble if you
are using the configuration value and also adding the proxy middleware
manually with a custom application startup.  The solution is that you only
need the configuration value set, or the middleware manually added (not both).

=head2 VERSION 5.90060+

=head3 Catalyst::Log object autoflush on by default

Starting in 5.90065, the Catalyst::Log object has 'autoflush' which is on
by default. This causes all messages to be written to the log immediately
instead of at the end of startup and then at the end of each request. In
order to access the old behavior, you must now call:

  $c->log->autoflush(0);

=head3 Deprecate Catalyst::Utils::ensure_class_loaded

Going forward we recommend you use L<Module::Runtime>.  In fact we will
be converting all uses of L<Class::Load> to L<Module::Runtime>.  We will
also convert L<Catalyst::Utils\ensure_class_loaded> to be based on
L<Module::Runtime> to allow some time for you to update code, however at
some future point this method will be removed so you should stop
using it now.

=head3 Support passing Body filehandles directly to your Plack server.

We changed the way we return body content (from response) to whatever
Plack handler you are using (Starman, FastCGI, etc.)  We no longer
always use the streaming interface for the cases when the body is a
simple scalar, object or filehandle like.  In those cases we now just
pass the simple response on to the plack handler.  This might lead to
some minor differences in how streaming is handled.  For example, you
might notice that streaming starts properly supporting chunked encoding when
on a server that supports that, or that previously missing headers
(possible content-length) might appear suddenly correct.  Also, if you
are using middleware like L<Plack::Middleware::XSendfile> and are using
a filehandle that sets a readable path, your server might now correctly
handle the file (rather than as before where Catalyst would stream it
very likely very slowly).

In other words, some things might be meaninglessly different and some
things that were broken codewise but worked because of Catalyst being
incorrect might suddenly be really broken.  The behavior is now more
correct in that Catalyst plays better with features that Plack offers
but if you are making heavy use of the streaming interface there could
be some differences so you should test carefully (this is probably not
the vast majority of people).  In particular if you are developing
using one server but deploying using a different one, differences in
what those server do with streaming should be noted.

Please see note below about changes to filehandle support and existing
Plack middleware to aid in backwards compatibility.

=head3 Distinguish between body null versus undef.

We also now more carefully distinguish the different between a body set
to '' and a body that is undef.  This might lead to situations where
again you'll get a content-length were you didn't get one before or
where a supporting server will start chunking output.  If this is an
issue you can apply the middleware L<Plack::Middleware::BufferedStreaming>
or report specific problems to the dev team.

=head3 More Catalyst Middleware

We have started migrating code in Catalyst to equivalent Plack
Middleware when such exists and is correct to do so.  For example we now use
L<Plack::Middleware::ContentLength> to determine content length of a response
when none is provided.  This replaces similar code inlined with L<Catalyst>
The main advantages to doing this is 1) more similar Catalyst core that is 
focused on the Catalyst special sauce, 2) Middleware is more broadly shared
so we benefit from better collaboration with developers outside Catalyst, 3)
In the future you'll be able to change or trim the middleware stack to get
additional performance when you don't need all the checks and constraints.

=head3 Deprecate Filehandle like objects that do read but not getline

We also deprecated setting the response body to an object that does 'read'
but not 'getline'.  If you are using a custom IO-Handle like object for
response you should verify that 'getline' is supported in your interface.
Unless we here this case is a major issue for people, we will be removing support
in a near future release of Catalyst.  When the code encounters this it
will issue a warning.  You also may run into this issue with L<MogileFS::Client>
which does read but not getline.  For now we will just warn when encountering
such an object and fallback to the previous behavior (where L<Catalyst::Engine>
itself unrolls the filehandle and performs blocking streams).  However
this backwards compatibility will be removed in an upcoming release so you should either
rewrite your custom filehandle objects to support getline or start using the 
middleware that adapts read for getline L<Plack::Middleware::AdaptFilehandleRead>.

=head3 Response->headers become read-only after finalizing

Once the response headers are finalized, trying to change them is not allowed
(in the past you could change them and this would lead to unexpected results).

=head3 Officially deprecate L<Catalyst::Engine::PSGI>

L<Catalyst::Engine::PSGI> is also officially no longer supported.  We will
no long run test cases against this and can remove backwards compatibility code for it
as deemed necessary for the evolution of the platform.  You should simply
discontinue use of this engine, as L<Catalyst> has been PSGI at the core for
several years.

=head3 Officially deprecate finding the PSGI $env anyplace other than Request

A few early releases of Cataplack had the PSGI $env in L<Catalyst::Engine>.
Code has been maintained here for backwards compatibility reasons.  This is no
longer supported and will be removed in upcoming release, so you should update
your code and / or upgrade to a newer version of L<Catalyst>

=head3 Deprecate setting Response->body after using write/write_fh

Setting $c->res->body to a filehandle after using $c->res->write or
$c->res->write_fh is no longer considered allowed, since we can't send
the filehandle to the underlying Plack handler.  For now we will continue
to support setting body to a simple value since this is possible, but at
some future release a choice to use streaming indicates that you will do
so for the rest of the request.


=head2 VERSION 5.90053

We are now clarifying the behavior of log, plugins and configuration during
the setup phase.  Since Plugins might require a log during setup, setup_log
must run BEFORE setup_plugins.   This has the unfortunate side effect that
anyone using the popular ConfigLoader plugin will not be able to supply
configuration to custom logs since the configuration is not yet finalized
when setup_log is run (when using ConfigLoader, which is a plugin and is
not loaded until later.)

As a workaround, you can supply custom log configuration directly into
the configuration:

    package MyApp;
    use Catalyst;

    __PACKAGE__->config(
      my_custom_log_info => { %custom_args },
    );

    __PACKAGE__->setup;

If you wish to configure the custom logger differently based on ENV, you can
try:

    package MyApp;

    use Catalyst;
    use Catalyst::Utils;

    __PACKAGE__->config(
      Catalyst::Utils::merge_hashes(
        +{ my_custom_log_info => { %base_custom_args } },
        +{ do __PACKAGE__->path_to( $ENV{WHICH_CONF}."_conf.pl") },
      ),
    );

    __PACKAGE__->setup;

Or create a standalone Configuration class that does the right thing.

Basically if you want to configure a logger via Catalyst global configuration
you can't use ConfigLoader because it will always be loaded too late to be of
any use.  Patches and workaround options welcomed!

=head2 VERSION 5.9XXXX 'cataplack'

The Catalyst::Engine sub-classes have all been removed and deprecated,
to be replaced with Plack handlers.

Plack is an implementation of the L<PSGI> specification, which is
a standard interface between web servers and application frameworks.

This should be no different for developers, and you should not have to
migrate your applications unless you are using a custom engine already.

This change benefits Catalyst significantly by reducing the amount of
code inside the framework, and means that the framework gets upstream
bug fixes in L<Plack>, and automatically gains support for any web server
which a L<PSGI> compliant handler is written for.

It also allows you more flexibility with your application, and allows
the use of cross web framework 'middleware'.

Developers are recommended to read L<Catalyst::Upgrading> for notes about
upgrading, especially if you are using an unusual deployment method.

Documentation for how to take advantage of L<PSGI> can be found in
L<Catalyst::PSGI>, and information about deploying your application
has been moved to L<Catalyst::Manual::Deployment>.

=head3 Updated modules:

A number of modules have been updated to pass their tests or not
produce deprecation warnings with the latest version of Catalyst.
It is recommended that you upgrade any of these that you are using
after installing this version of Catalyst.

These extensions are:

=over

=item L<Catalyst::Engine::HTTP::Prefork>

This is now deprecated, see L<Catalyst::Upgrading>.

=item L<Test::WWW::Mechanize::Catalyst>

Has been updated to not produce deprecation warnings, upgrade recommended.

=item Catalyst::ActionRole::ACL

Has been updated to fix failing tests (although older versions still
function perfectly with this version of Catalyst).

=item Catalyst::Plugin::Session::Store::DBIC

Has been updated to fix failing tests (although older versions still
function perfectly with this version of Catalyst).

=item Catalyst::Plugin::Authentication

Has been updated to fix failing tests (although older versions still
function perfectly with this version of Catalyst).

=back

=head1 PREVIOUS VERSIONS

=head2 VERSION 5.8XXXX 'catamoose'

=head3 Deprecations

Please see L<Catalyst::Upgrading> for a full description of how changes in the
framework may affect your application.

Below is a brief list of features which have been deprecated in this release:

=over

=item ::[MVC]:: style naming scheme has been deprecated and will warn

=item NEXT is deprecated for all applications and components, use MRO::Compat

=item Dispatcher methods which are an implementation detail made private, public versions now warn.

=item MyApp->plugin method is deprecated, use L<Catalyst::Model::Adaptor> instead.

=item __PACKAGE__->mk_accessors() is supported for backwards compatibility only, use Moose attributes instead in new code.

=item Use of Catalyst::Base now warns

=back

=head3 New features

=head3 Dispatcher

=over

=item Fix forwarding to Catalyst::Action objects.

=item Add the dispatch_type method

=back

=head3 Restarter

The development server restarter has been improved to be compatible with
immutable Moose classes, and also to optionally use 
L<B::Hooks::OP::Check::StashChange> to handle more complex application layouts
correctly.

=head3 $c->uri_for_action method.

Give a private path to the Catalyst action you want to create a URI for.

=head3 Logging

Log levels have been made additive.

=head3 L<Catalyst::Test>

=over

=item Change to use L<Sub::Exporter>.

=item Support mocking multiple virtual hosts

=item New methods like action_ok and action_redirect to write more compact tests

=back

=head3 Catalyst::Response

=over

=item *

New print method which prints @data to the output stream, separated by $,.  
This lets you pass the response object to functions that want to write to an 
L<IO::Handle>.

=item *

Added code method as an alias for C<< $res->status >>

=back

=head3 Consequences of the Moose back end

=over

=item *

Components are fully compatible with Moose, and all Moose features, such as
method modifiers, attributes, roles, BUILD and BUILDARGS methods are fully
supported and may be used in components and applications.

=item *

Many reusable extensions which would previously have been plugins or base 
classes are better implemented as Moose roles.

=item *

L<MooseX::MethodAttributes::Role::AttrContainer::Inheritable> is used to contain action
attributes. This means that attributes are represented in the MOP, and
decouples action creation from attributes.

=item *

There is a reasonable API in Catalyst::Controller for working with
and registering actions, allowing a controller sub-class to replace
subroutine attributes for action declarations with an alternate
syntax.

=item *

Refactored capturing of $app from L<Catalyst::Controller> into
L<Catalyst::Component::ApplicationAttribute> for easier reuse in other
components.

=item *

Your application class is forced to become immutable at the end of compilation.

=back

=head3 Bug fixes

=over

=item *

Don't ignore SIGCHLD while handling requests with the development server, so that
system() and other ways of creating child processes work as expected.

=item *

Fixes for FastCGI when used with IIS 6.0

=item *

Fix a bug in uri_for which could cause it to generate paths with multiple 
slashes in them.

=item *

Fix a bug in Catalyst::Stats, stopping garbage being inserted into
the stats if a user calls begin => but no end

=back