L<Catalyst::Manual::Deployment::Apache::FastCGI>
-=head2 mod_perl Deployment
-
-mod_perl is not the best solution for many applications, but we'll list some
-pros and cons so you can decide for yourself. The other (recommended)
-deployment option is FastCGI, for which see below.
-
-=head3 Pros
-
-=head4 Speed
-
-mod_perl is fast and your app will be loaded in memory
-within each Apache process.
-
-=head4 Shared memory for multiple apps
-
-If you need to run several Catalyst apps on the same server, mod_perl will
-share the memory for common modules.
-
-=head3 Cons
-
-=head4 Memory usage
-
-Since your application is fully loaded in memory, every Apache process will
-be rather large. This means a large Apache process will be tied up while
-serving static files, large files, or dealing with slow clients. For this
-reason, it is best to run a two-tiered web architecture with a lightweight
-frontend server passing dynamic requests to a large backend mod_perl
-server.
-
-=head4 Reloading
-
-Any changes made to the core code of your app require a full Apache restart.
-Catalyst does not support Apache::Reload or StatINC. This is another good
-reason to run a frontend web server where you can set up an
-C<ErrorDocument 502> page to report that your app is down for maintenance.
-
-=head4 Cannot run multiple versions of the same app
-
-It is not possible to run two different versions of the same application in
-the same Apache instance because the namespaces will collide.
-
-=head4 Cannot run different versions of libraries.
-
-If you have two different applications which run on the same machine,
-which need two different versions of a library then the only way to do
-this is to have per-vhost perl interpreters (with different library paths).
-This is entirely possible, but nullifies all the memory sharing benefits that
-you get from having multiple applications sharing the same interpreter.
-
-=head4 Setup
-
-Now that we have that out of the way, let's talk about setting up mod_perl
-to run a Catalyst app.
-
-=head4 1. Install Catalyst::Engine::Apache
-
-You should install the latest versions of both Catalyst and
-Catalyst::Engine::Apache. The Apache engines were separated from the
-Catalyst core in version 5.50 to allow for updates to the engine without
-requiring a new Catalyst release.
-
-=head4 2. Install Apache with mod_perl
-
-Both Apache 1.3 and Apache 2 are supported, although Apache 2 is highly
-recommended. With Apache 2, make sure you are using the prefork MPM and not
-the worker MPM. The reason for this is that many Perl modules are not
-thread-safe and may have problems running within the threaded worker
-environment. Catalyst is thread-safe however, so if you know what you're
-doing, you may be able to run using worker.
-
-In Debian, the following commands should get you going.
-
- apt-get install apache2-mpm-prefork
- apt-get install libapache2-mod-perl2
-
-=head4 3. Configure your application
-
-Every Catalyst application will automagically become a mod_perl handler
-when run within mod_perl. This makes the configuration extremely easy.
-Here is a basic Apache 2 configuration.
-
- PerlSwitches -I/var/www/MyApp/lib
- PerlModule MyApp
-
- <Location />
- SetHandler modperl
- PerlResponseHandler MyApp
- </Location>
-
-The most important line here is C<PerlModule MyApp>. This causes mod_perl
-to preload your entire application into shared memory, including all of your
-controller, model, and view classes and configuration. If you have -Debug
-mode enabled, you will see the startup output scroll by when you first
-start Apache.
-
-For an example Apache 1.3 configuration, please see the documentation for
-L<Catalyst::Engine::Apache::MP13>.
-
-=head3 Test It
-
-That's it, your app is now a full-fledged mod_perl application! Try it out
-by going to http://your.server.com/.
-
-=head3 Other Options
-
-=head4 Non-root location
-
-You may not always want to run your app at the root of your server or virtual
-host. In this case, it's a simple change to run at any non-root location
-of your choice.
-
- <Location /myapp>
- SetHandler modperl
- PerlResponseHandler MyApp
- </Location>
-
-When running this way, it is best to make use of the C<uri_for> method in
-Catalyst for constructing correct links.
-
-=head4 Static file handling
-
-Static files can be served directly by Apache for a performance boost.
-
- DocumentRoot /var/www/MyApp/root
- <Location /static>
- SetHandler default-handler
- </Location>
-
-This will let all files within root/static be handled directly by Apache. In
-a two-tiered setup, the frontend server should handle static files.
-The configuration to do this on the frontend will vary.
-
-The same is accomplished in lighttpd with the following snippet:
-
- $HTTP["url"] !~ "^/(?:img/|static/|css/|favicon.ico$)" {
- fastcgi.server = (
- "" => (
- "MyApp" => (
- "socket" => "/tmp/myapp.socket",
- "check-local" => "disable",
- )
- )
- )
- }
-
-Which serves everything in the img, static, css directories
-statically, as well as the favicon file.
-
-Note the path of the application needs to be stated explicitly in the
-web server configuration for both these recipes.
-
-=head2 Catalyst on shared hosting
-
-So, you want to put your Catalyst app out there for the whole world to
-see, but you don't want to break the bank. There is an answer - if you
-can get shared hosting with FastCGI and a shell, you can install your
-Catalyst app in a local directory on your shared host. First, run
-
- perl -MCPAN -e shell
-
-and go through the standard CPAN configuration process. Then exit out
-without installing anything. Next, open your .bashrc and add
-
- export PATH=$HOME/local/bin:$HOME/local/script:$PATH
- perlversion=`perl -v | grep 'built for' | awk '{print $4}' | sed -e 's/v//;'`
- export PERL5LIB=$HOME/local/share/perl/$perlversion:$HOME/local/lib/perl/$perlversion:$HOME/local/lib:$PERL5LIB
-
-and log out, then back in again (or run C<". .bashrc"> if you
-prefer). Finally, edit C<.cpan/CPAN/MyConfig.pm> and add
-
- 'make_install_arg' => qq[SITEPREFIX=$ENV{HOME}/local],
- 'makepl_arg' => qq[INSTALLDIRS=site install_base=$ENV{HOME}/local],
-
-Now you can install the modules you need using CPAN as normal; they
-will be installed into your local directory, and perl will pick them
-up. Finally, change directory into the root of your virtual host and
-symlink your application's script directory in:
-
- cd path/to/mydomain.com
- ln -s ~/lib/MyApp/script script
-
-And add the following lines to your .htaccess file (assuming the server
-is setup to handle .pl as fcgi - you may need to rename the script to
-myapp_fastcgi.fcgi and/or use a SetHandler directive):
-
- RewriteEngine On
- RewriteCond %{REQUEST_URI} !^/?script/myapp_fastcgi.pl
- RewriteRule ^(.*)$ script/myapp_fastcgi.pl/$1 [PT,L]
-
-Now C<http://mydomain.com/> should now Just Work. Congratulations, now
-you can tell your friends about your new website (or in our case, tell
-the client it's time to pay the invoice :) )
-
-=head2 FastCGI Deployment
-
-FastCGI is a high-performance extension to CGI. It is suitable
-for production environments.
-
-=head3 Pros
-
-=head4 Speed
-
-FastCGI performs equally as well as mod_perl. Don't let the 'CGI' fool you;
-your app runs as multiple persistent processes ready to receive connections
-from the web server.
-
-=head4 App Server
-
-When using external FastCGI servers, your application runs as a standalone
-application server. It may be restarted independently from the web server.
-This allows for a more robust environment and faster reload times when
-pushing new app changes. The frontend server can even be configured to
-display a friendly "down for maintenance" page while the application is
-restarting.
-
-=head4 Load-balancing
-
-You can launch your application on multiple backend servers and allow the
-frontend web server to load-balance between all of them. And of course, if
-one goes down, your app continues to run fine.
-
-=head4 Multiple versions of the same app
-
-Each FastCGI application is a separate process, so you can run different
-versions of the same app on a single server.
-
-=head4 Can run with threaded Apache
-
-Since your app is not running inside of Apache, the faster mpm_worker module
-can be used without worrying about the thread safety of your application.
-
-=head3 Cons
-
-You may have to disable mod_deflate. If you experience page hangs with
-mod_fastcgi then remove deflate.load and deflate.conf from mods-enabled/
-
-=head4 More complex environment
-
-With FastCGI, there are more things to monitor and more processes running
-than when using mod_perl.
-
-=head3 Setup
-
-=head4 1. Install Apache with mod_fastcgi
-
-mod_fastcgi for Apache is a third party module, and can be found at
-L<http://www.fastcgi.com/>. It is also packaged in many distributions,
-for example, libapache2-mod-fastcgi in Debian. You will also need to install
-the L<FCGI> module from cpan.
-
-Important Note! If you experience difficulty properly rendering pages,
-try disabling Apache's mod_deflate (Deflate Module), e.g. 'a2dismod deflate'.
-
-=head4 2. Configure your application
-
- # Serve static content directly
- DocumentRoot /var/www/MyApp/root
- Alias /static /var/www/MyApp/root/static
-
- FastCgiServer /var/www/MyApp/script/myapp_fastcgi.pl -processes 3
- Alias /myapp/ /var/www/MyApp/script/myapp_fastcgi.pl/
-
- # Or, run at the root
- Alias / /var/www/MyApp/script/myapp_fastcgi.pl/
-
-The above commands will launch 3 app processes and make the app available at
-/myapp/
-
-=head3 Standalone server mode
-
-While not as easy as the previous method, running your app as an external
-server gives you much more flexibility.
-
-First, launch your app as a standalone server listening on a socket.
-
- script/myapp_fastcgi.pl -l /tmp/myapp.socket -n 5 -p /tmp/myapp.pid -d
-
-You can also listen on a TCP port if your web server is not on the same
-machine.
-
- script/myapp_fastcgi.pl -l :8080 -n 5 -p /tmp/myapp.pid -d
-
-You will probably want to write an init script to handle starting/stopping
-of the app using the pid file.
-
-Now, we simply configure Apache to connect to the running server.
-
- # 502 is a Bad Gateway error, and will occur if the backend server is down
- # This allows us to display a friendly static page that says "down for
- # maintenance"
- Alias /_errors /var/www/MyApp/root/error-pages
- ErrorDocument 502 /_errors/502.html
-
- FastCgiExternalServer /tmp/myapp.fcgi -socket /tmp/myapp.socket
- Alias /myapp/ /tmp/myapp.fcgi/
-
- # Or, run at the root
- Alias / /tmp/myapp.fcgi/
-
-=head3 More Info
-
-L<Catalyst::Engine::FastCGI>.
-
-=head2 Development server deployment
-
-The development server is a mini web server written in perl. If you
-expect a low number of hits or you don't need mod_perl/FastCGI speed,
-you could use the development server as the application server with a
-lightweight proxy web server at the front. However, consider using
-L<Catalyst::Engine::HTTP::Prefork> for this kind of deployment instead, since
-it can better handle multiple concurrent requests without forking, or can
-prefork a set number of servers for improved performance.
-
-=head3 Pros
-
-As this is an application server setup, the pros are the same as
-FastCGI (with the exception of speed).
-It is also:
-
-=head4 Simple
-
-The development server is what you create your code on, so if it works
-here, it should work in production!
-
-=head3 Cons
-
-=head4 Speed
-
-Not as fast as mod_perl or FastCGI. Needs to fork for each request
-that comes in - make sure static files are served by the web server to
-save forking.
-
-=head3 Setup
-
-=head4 Start up the development server
-
- script/myapp_server.pl -p 8080 -k -f -pidfile=/tmp/myapp.pid
-
-You will probably want to write an init script to handle stop/starting
-the app using the pid file.
-
-=head4 Configuring Apache
-
-Make sure mod_proxy is enabled and add:
-
- # Serve static content directly
- DocumentRoot /var/www/MyApp/root
- Alias /static /var/www/MyApp/root/static
-
- ProxyRequests Off
- <Proxy *>
- Order deny,allow
- Allow from all
- </Proxy>
-
- # Need to specifically stop these paths from being passed to proxy
- ProxyPass /static !
- ProxyPass /favicon.ico !
-
- ProxyPass / http://localhost:8080/
- ProxyPassReverse / http://localhost:8080/
-
- # This is optional if you'd like to show a custom error page
- # if the proxy is not available
- ErrorDocument 502 /static/error_pages/http502.html
-
-You can wrap the above within a VirtualHost container if you want
-different apps served on the same host.
-
=head1 AUTHORS
Catalyst Contributors, see Catalyst.pm
Important Note! If you experience difficulty properly rendering pages,
try disabling Apache's mod_deflate (Deflate Module), e.g. 'a2dismod deflate'.
+=head2 Apache 1.x, 2.x
+
+Apache requires the mod_fastcgi module. The same module supports both
+Apache 1 and 2.
+
+There are three ways to run your application under FastCGI on Apache: server,
+static, and dynamic.
+
+=head3 Standalone server mode
+
+ FastCgiExternalServer /tmp/myapp.fcgi -socket /tmp/myapp.socket
+ Alias /myapp/ /tmp/myapp.fcgi/
+
+ # Or, run at the root
+ Alias / /tmp/myapp.fcgi/
+
+ # Optionally, rewrite the path when accessed without a trailing slash
+ RewriteRule ^/myapp$ myapp/ [R]
+
+
+The FastCgiExternalServer directive tells Apache that when serving
+/tmp/myapp to use the FastCGI application listenting on the socket
+/tmp/mapp.socket. Note that /tmp/myapp.fcgi B<MUST NOT> exist --
+it's a virtual file name. With some versions of C<mod_fastcgi> or
+C<mod_fcgid>, you can use any name you like, but some require that the
+virtual filename end in C<.fcgi>.
+
+It's likely that Apache is not configured to serve files in /tmp, so the
+Alias directive maps the url path /myapp/ to the (virtual) file that runs the
+FastCGI application. The trailing slashes are important as their use will
+correctly set the PATH_INFO environment variable used by Catalyst to
+determine the request path. If you would like to be able to access your app
+without a trailing slash (http://server/myapp), you can use the above
+RewriteRule directive.
+
+=head3 Static mode
+
+The term 'static' is misleading, but in static mode Apache uses its own
+FastCGI Process Manager to start the application processes. This happens at
+Apache startup time. In this case you do not run your application's
+fastcgi.pl script -- that is done by Apache. Apache then maps URIs to the
+FastCGI script to run your application.
+
+ FastCgiServer /path/to/myapp/script/myapp_fastcgi.pl -processes 3
+ Alias /myapp/ /path/to/myapp/script/myapp_fastcgi.pl/
+
+FastCgiServer tells Apache to start three processes of your application at
+startup. The Alias command maps a path to the FastCGI application. Again,
+the trailing slashes are important.
+
+=head3 Dynamic mode
+
+In FastCGI dynamic mode, Apache will run your application on demand,
+typically by requesting a file with a specific extension (e.g. .fcgi). ISPs
+often use this type of setup to provide FastCGI support to many customers.
+
+In this mode it is often enough to place or link your *_fastcgi.pl script in
+your cgi-bin directory with the extension of .fcgi. In dynamic mode Apache
+must be able to run your application as a CGI script so ExecCGI must be
+enabled for the directory.
+
+ AddHandler fastcgi-script .fcgi
+
+The above tells Apache to run any .fcgi file as a FastCGI application.
+
+Here is a complete example:
+
+ <VirtualHost *:80>
+ ServerName www.myapp.com
+ DocumentRoot /path/to/MyApp
+
+ # Allow CGI script to run
+ <Directory /path/to/MyApp>
+ Options +ExecCGI
+ </Directory>
+
+ # Tell Apache this is a FastCGI application
+ <Files myapp_fastcgi.pl>
+ SetHandler fastcgi-script
+ </Files>
+ </VirtualHost>
+
+Then a request for /script/myapp_fastcgi.pl will run the
+application.
+
+For more information on using FastCGI under Apache, visit
+L<http://www.fastcgi.com/mod_fastcgi/docs/mod_fastcgi.html>
+
+=head3 Authorization header with mod_fastcgi or mod_cgi
+
+By default, mod_fastcgi/mod_cgi do not pass along the Authorization header,
+so modules like C<Catalyst::Plugin::Authentication::Credential::HTTP> will
+not work. To enable pass-through of this header, add the following
+mod_rewrite directives:
+
+ RewriteCond %{HTTP:Authorization} ^(.+)
+ RewriteRule ^(.*)$ $1 [E=HTTP_AUTHORIZATION:%1,PT]
+
+
=head4 2. Configure your application
# Serve static content directly
XXX - FIXME, note not just apache!
-=head3 More Info
+=head2 Standalone FastCGI Server
-L<Catalyst::Engine::FastCGI> - XXX FIXME.
+In server mode the application runs as a standalone server and accepts
+connections from a web server. The application can be on the same machine as
+the web server, on a remote machine, or even on multiple remote machines.
+Advantages of this method include running the Catalyst application as a
+different user than the web server, and the ability to set up a scalable
+server farm.
+
+To start your application in server mode, install the FCGI::ProcManager
+module and then use the included fastcgi.pl script.
+
+ $ script/myapp_fastcgi.pl -l /tmp/myapp.socket -n 5
+
+Command line options for fastcgi.pl include:
+
+ -d -daemon Daemonize the server.
+ -p -pidfile Write a pidfile with the pid of the process manager.
+ -l -listen Listen on a socket path, hostname:port, or :port.
+ -n -nproc The number of processes started to handle requests.
+
+See below for the specific web server configurations for using the external
+server.
=head1 AUTHORS
--- /dev/null
+=head1 NAME
+
+Catalyst::Manual::Deployment::IIS::FastCGI - Deploying Catalyst with Microsoft IIS
+
+=head2 Microsoft IIS
+
+It is possible to run Catalyst under IIS with FastCGI, but only on IIS 6.0
+(Microsoft Windows 2003), IIS 7.0 (Microsoft Windows 2008 and Vista) and
+hopefully its successors.
+
+Even if it is declared that FastCGI is supported on IIS 5.1 (Windows XP) it
+does not support some features (specifically: wildcard mappings) that prevents
+running Catalyst application.
+
+Let us assume that our server has the following layout:
+
+ d:\WWW\WebApp\ path to our Catalyst application
+ d:\strawberry\perl\bin\perl.exe path to perl interpreter (with Catalyst installed)
+ c:\windows Windows directory
+
+=head3 Setup IIS 6.0 (Windows 2003)
+
+=over 4
+
+=item Install FastCGI extension for IIS 6.0
+
+FastCGI is not a standard part of IIS 6 - you have to install it separately. For
+more info and download go to L<http://www.iis.net/extensions/FastCGI>. Choose
+approptiate version (32-bit/64-bit), installation is quite simple
+(in fact no questions, no options).
+
+=item Create a new website
+
+Open "Control Panel" > "Administrative Tools" > "Internet Information Services Manager".
+Click "Action" > "New" > "Web Site". After you finish the installation wizard
+you need to go to the new website's properties.
+
+=item Set website properties
+
+On tab "Web site" set proper values for:
+Site Description, IP Address, TCP Port, SSL Port etc.
+
+On tab "Home Directory" set the following:
+
+ Local path: "d:\WWW\WebApp\root"
+ Local path permission flags: check only "Read" + "Log visits"
+ Execute permitions: "Scripts only"
+
+Click "Configuration" button (still on Home Directory tab) then click "Insert"
+the wildcard application mapping and in the next dialog set:
+
+ Executable: "c:\windows\system32\inetsrv\fcgiext.dll"
+ Uncheck: "Verify that file exists"
+
+Close all dialogs with "OK".
+
+=item Edit fcgiext.ini
+
+Put the following lines into c:\windows\system32\inetsrv\fcgiext.ini (on 64-bit
+system c:\windows\syswow64\inetsrv\fcgiext.ini):
+
+ [Types]
+ *:8=CatalystApp
+ ;replace 8 with the identification number of the newly created website
+ ;it is not so easy to get this number:
+ ; - you can use utility "c:\inetpub\adminscripts\adsutil.vbs"
+ ; to list websites: "cscript adsutil.vbs ENUM /P /W3SVC"
+ ; to get site name: "cscript adsutil.vbs GET /W3SVC/<number>/ServerComment"
+ ; to get all details: "cscript adsutil.vbs GET /W3SVC/<number>"
+ ; - or look where are the logs located:
+ ; c:\WINDOWS\SYSTEM32\Logfiles\W3SVC7\whatever.log
+ ; means that the corresponding number is "7"
+ ;if you are running just one website using FastCGI you can use '*=CatalystApp'
+
+ [CatalystApp]
+ ExePath=d:\strawberry\perl\bin\perl.exe
+ Arguments="d:\WWW\WebApp\script\webapp_fastcgi.pl -e"
+
+ ;by setting this you can instruct IIS to serve Catalyst static files
+ ;directly not via FastCGI (in case of any problems try 1)
+ IgnoreExistingFiles=0
+
+ ;do not be fooled by Microsoft doc talking about "IgnoreExistingDirectories"
+ ;that does not work and use "IgnoreDirectories" instead
+ IgnoreDirectories=1
+
+=back
+
+=head3 Setup IIS 7.0 (Windows 2008 and Vista)
+
+Microsoft IIS 7.0 has built-in support for FastCGI so you do not have to install
+any addons.
+
+=over 4
+
+=item Necessary steps during IIS7 installation
+
+During IIS7 installation after you have added role "Web Server (IIS)"
+you need to check to install role feature "CGI" (do not be nervous that it is
+not FastCGI). If you already have IIS7 installed you can add "CGI" role feature
+through "Control panel" > "Programs and Features".
+
+=item Create a new website
+
+Open "Control Panel" > "Administrative Tools" > "Internet Information Services Manager"
+> "Add Web Site".
+
+ site name: "CatalystSite"
+ content directory: "d:\WWW\WebApp\root"
+ binding: set proper IP address, port etc.
+
+=item Configure FastCGI
+
+You can configure FastCGI extension using commandline utility
+"c:\windows\system32\inetsrv\appcmd.exe"
+
+=over 4
+
+=item Configuring section "fastCgi" (it is a global setting)
+
+ appcmd.exe set config -section:system.webServer/fastCgi /+"[fullPath='d:\strawberry\perl\bin\perl.exe',arguments='d:\www\WebApp\script\webapp_fastcgi.pl -e',maxInstances='4',idleTimeout='300',activityTimeout='30',requestTimeout='90',instanceMaxRequests='1000',protocol='NamedPipe',flushNamedPipe='False']" /commit:apphost
+
+=item Configuring proper handler (it is a site related setting)
+
+ appcmd.exe set config "CatalystSite" -section:system.webServer/handlers /+"[name='CatalystFastCGI',path='*',verb='GET,HEAD,POST',modules='FastCgiModule',scriptProcessor='d:\strawberry\perl\bin\perl.exe|d:\www\WebApp\script\webapp_fastcgi.pl -e',resourceType='Unspecified',requireAccess='Script']" /commit:apphost
+
+Note: before launching the commands above do not forget to change site
+name and paths to values relevant for your server setup.
+
+=back
+
+=back
+
+=head1 AUTHORS
+
+Catalyst Contributors, see Catalyst.pm
+
+=head1 COPYRIGHT
+
+This library is free software. You can redistribute it and/or modify it under
+the same terms as Perl itself.
+
+=cut
Catalyst::Manual::Deployment::lighttpd::FastCGI - Deploying Catalyst with lighttpd
+=head2 Lighttpd
+
+These configurations were tested with Lighttpd 1.4.7.
+
+=head3 Standalone server mode
+
+ server.document-root = "/var/www/MyApp/root"
+
+ fastcgi.server = (
+ "" => (
+ "MyApp" => (
+ "socket" => "/tmp/myapp.socket",
+ "check-local" => "disable"
+ )
+ )
+ )
+
+=head3 Static mode
+
+ server.document-root = "/var/www/MyApp/root"
+
+ fastcgi.server = (
+ "" => (
+ "MyApp" => (
+ "socket" => "/tmp/myapp.socket",
+ "check-local" => "disable",
+ "bin-path" => "/var/www/MyApp/script/myapp_fastcgi.pl",
+ "min-procs" => 2,
+ "max-procs" => 5,
+ "idle-timeout" => 20
+ )
+ )
+ )
+
+Note that in newer versions of lighttpd, the min-procs and idle-timeout
+values are disabled. The above example would start 5 processes.
+
+=head3 Non-root configuration
+
+You can also run your application at any non-root location with either of the
+above modes. Note the required mod_rewrite rule.
+
+ url.rewrite = ( "myapp\$" => "myapp/" )
+ fastcgi.server = (
+ "/myapp" => (
+ "MyApp" => (
+ # same as above
+ )
+ )
+ )
+
+For more information on using FastCGI under Lighttpd, visit
+L<http://www.lighttpd.net/documentation/fastcgi.html>
+
+
=head4 Static file handling
Static files can be served directly by lighttpd for a performance boost.
Which serves everything in the img, static, css directories
statically, as well as the favicon file.
+=head1 AUTHORS
+
+Catalyst Contributors, see Catalyst.pm
+
+=head1 COPYRIGHT
+
+This library is free software. You can redistribute it and/or modify it under
+the same terms as Perl itself.
+
+=cut
\ No newline at end of file
--- /dev/null
+=head1 NAME
+
+Catalyst::Manual::Deployment::nginx::FastCGI - Deploying Catalyst with nginx
+
+=head nginx
+
+Catalyst runs under nginx via FastCGI in a similar fashion as the lighttpd
+standalone server as described above.
+
+nginx does not have its own internal FastCGI process manager, so you must run
+the FastCGI service separately.
+
+=head3 Configuration
+
+To configure nginx, you must configure the FastCGI parameters and also the
+socket your FastCGI daemon is listening on. It can be either a TCP socket
+or a Unix file socket.
+
+The server configuration block should look roughly like:
+
+ server {
+ listen $port;
+
+ location / {
+ fastcgi_param QUERY_STRING $query_string;
+ fastcgi_param REQUEST_METHOD $request_method;
+ fastcgi_param CONTENT_TYPE $content_type;
+ fastcgi_param CONTENT_LENGTH $content_length;
+
+ fastcgi_param SCRIPT_NAME /;
+ fastcgi_param PATH_INFO $fastcgi_script_name;
+ fastcgi_param REQUEST_URI $request_uri;
+ fastcgi_param DOCUMENT_URI $document_uri;
+ fastcgi_param DOCUMENT_ROOT $document_root;
+ fastcgi_param SERVER_PROTOCOL $server_protocol;
+
+ fastcgi_param GATEWAY_INTERFACE CGI/1.1;
+ fastcgi_param SERVER_SOFTWARE nginx/$nginx_version;
+
+ fastcgi_param REMOTE_ADDR $remote_addr;
+ fastcgi_param REMOTE_PORT $remote_port;
+ fastcgi_param SERVER_ADDR $server_addr;
+ fastcgi_param SERVER_PORT $server_port;
+ fastcgi_param SERVER_NAME $server_name;
+
+ # Adjust the socket for your applications!
+ fastcgi_pass unix:$docroot/myapp.socket;
+ }
+ }
+
+It is the standard convention of nginx to include the fastcgi_params in a
+separate file (usually something like C</etc/nginx/fastcgi_params>) and
+simply include that file.
+
+=head3 Non-root configuration
+
+If you properly specify the PATH_INFO and SCRIPT_NAME parameters your
+application will be accessible at any path. The SCRIPT_NAME variable is the
+prefix of your application, and PATH_INFO would be everything in addition.
+
+As an example, if your application is rooted at /myapp, you would configure:
+
+ fastcgi_param SCRIPT_NAME /myapp/;
+ fastcgi_param PATH_INFO $fastcgi_script_name;
+
+C<$fastcgi_script_name> would be "/myapp/path/of/the/action". Catalyst will
+process this accordingly and setup the application base as expected.
+
+This behavior is somewhat different than Apache and Lighttpd, but is still
+functional.
+
+For more information on nginx, visit:
+L<http://nginx.net>
+
+=head1 AUTHORS
+
+Catalyst Contributors, see Catalyst.pm
+
+=head1 COPYRIGHT
+
+This library is free software. You can redistribute it and/or modify it under
+the same terms as Perl itself.
+
+=cut
projects / catagits/Catalyst-Manual.git / commitdiff