X-Git-Url: http://git.shadowcat.co.uk/gitweb/gitweb.cgi?p=catagits%2FCatalyst-Manual.git;a=blobdiff_plain;f=lib%2FCatalyst%2FManual%2FTutorial%2FAdvancedCRUD%2FFormFu.pod;h=1c7176d1b0c8236933c715f9e38ad374ac7213f2;hp=80c872ca6290f8e903a3dad57f9a3dcbe2ebc5c1;hb=3b1fa91be1d89d2297aa9e8e83462344d9cd9820;hpb=aee2748332aed431f3c342d3dc2956c0ceb2b1ea diff --git a/lib/Catalyst/Manual/Tutorial/AdvancedCRUD/FormFu.pod b/lib/Catalyst/Manual/Tutorial/AdvancedCRUD/FormFu.pod index 80c872c..1c7176d 100644 --- a/lib/Catalyst/Manual/Tutorial/AdvancedCRUD/FormFu.pod +++ b/lib/Catalyst/Manual/Tutorial/AdvancedCRUD/FormFu.pod @@ -1,13 +1,11 @@ =head1 NAME - - -Catalyst::Manual::Tutorial::AdvancedCRUD::FormFu - Catalyst Tutorial - Part 9: Advanced CRUD - FormFu +Catalyst::Manual::Tutorial::AdvancedCRUD::FormFu - Catalyst Tutorial - Chapter 9: Advanced CRUD - FormFu =head1 OVERVIEW -This is B for the Catalyst tutorial. +This is B for the Catalyst tutorial. L @@ -69,57 +67,41 @@ for additional form management options other than L. -=head1 Install C +=head1 Install HTML::FormFu -If you are following along in Ubuntu, it turns out that C -is not yet available as a package at the time this was written. To -install it with a combination of C packages and traditional -CPAN modules, first use C to install most of the modules -required by C: +If you are following along in Debian 5, it turns out that some of the +modules we need are not yet available as Debian packages at the time +this was written. To install it with a combination of Debian packages +and traditional CPAN modules, first use C to install most of +the modules: - sudo apt-get install libtest-nowarnings-perl libdatetime-format-builder-perl \ - libdatetime-format-strptime-perl libdatetime-locale-perl \ - libhtml-tokeparser-simple-perl liblist-moreutils-perl \ - libregexp-copy-perl libregexp-common-perl libyaml-syck-perl libparams-util-perl \ - libcrypt-des-perl libcaptcha-recaptcha-perl libcrypt-cbc-perl \ - libreadonly-xs-perl libmoose-perl libregexp-assemble-perl - +we need to install the +L package: + + sudo aptitude -y install libhtml-formfu-perl libmoose-perl \ + libregexp-assemble-perl libhtml-formfu-model-dbic-perl + ... - sudo apt-get clean + sudo aptitude clean Then use the following command to install directly from CPAN the modules -that aren't available as Ubuntu/Debian packages via C: - - sudo cpan File::ShareDir Task::Weaken Config::Any Test::Harness Test::Aggregate \ - boolean Test::MockTime DateTime::Format::Natural HTML::FormFu \ - Catalyst::Component::InstancePerContext Catalyst::Controller::HTML::FormFu \ - HTML::FormFu::Model::DBIC - - ... - - Is it OK to try to connect to the Internet? [yes] yes - - ... - +that aren't available as Debian packages: -B If you are following along with the Ubuntu LiveCD, you might -want to make sure you still have adequate free disk space in the root -partition with the C command. You can free up some space with -C. + sudo cpan Catalyst::Component::InstancePerContext Catalyst::Controller::HTML::FormFu -=head1 C FORM CREATION +=head1 HTML::FormFu FORM CREATION This section looks at how L can be used to -add additional functionality to the manually created form from Part 4. +add additional functionality to the manually created form from Chapter 4. -=head2 Inherit From C +=head2 Inherit From Catalyst::Controller::HTML::FormFu First, change your C to inherit from L -by changing the C line from the default of: +by changing the C line from the default of: use parent 'Catalyst::Controller'; @@ -139,7 +121,7 @@ following method: =cut - sub formfu_create :Local :FormConfig { + sub formfu_create :Chained('base') :PathPart('formfu_create') :Args(0) :FormConfig { my ($self, $c) = @_; # Get the form that the :FormConfig attribute saved in the stash @@ -150,20 +132,20 @@ following method: # is shorthand for "$form->submitted && !$form->has_errors" if ($form->submitted_and_valid) { # Create a new book - my $book = $c->model('DB::Books')->new_result({}); + my $book = $c->model('DB::Book')->new_result({}); # Save the form data for the book $form->model->update($book); # Set a status message for the user $c->flash->{status_msg} = 'Book created'; # Return to the books list - $c->response->redirect($c->uri_for('list')); + $c->response->redirect($c->uri_for($self->action_for('list'))); $c->detach; } else { # Get the authors from the DB - my @authorObjs = $c->model("DB::Authors")->all(); + my @author_objs = $c->model("DB::Author")->all(); # Create an array of arrayrefs where each arrayref is an author my @authors; - foreach (sort {$a->last_name cmp $b->last_name} @authorObjs) { + foreach (sort {$a->last_name cmp $b->last_name} @author_objs) { push(@authors, [$_->id, $_->last_name]); } # Get the select added by the config file @@ -233,6 +215,7 @@ this document for a more foolproof config format. Edit C and add the following lines to the bottom of the file: + ... input { display: block; } @@ -260,7 +243,7 @@ Open C in your editor and enter the following: [%# Render the HTML::FormFu Form %] [% form %] -

Return to book list

+

Return to book list

=head2 Add Links for Create and Update via C @@ -268,16 +251,17 @@ Open C in your editor and enter the following: Open C in your editor and add the following to the bottom of the existing file: + ...

HTML::FormFu: - Create + Create

This adds a new link to the bottom of the book list page that we can use to easily launch our HTML::FormFu-based form. -=head2 Test The Create Form +=head2 Test The HTML::FormFu Create Form Press C to kill the previous server instance (if it's still running) and restart it: @@ -286,17 +270,21 @@ running) and restart it: Login as C (password: mypass). Once at the Book List page, click the new HTML::FormFu "Create" link at the bottom to display the -form. Fill in the following values: Title = "Internetworking with -TCP/IP Vol. II", Rating = "4", and Author = "Comer". Click Submit, -and you will be returned to the Book List page with a "Book created" -status message displayed. +form. Fill in the following values: + + Title = "Internetworking with TCP/IP Vol. II" + Rating = "4" + Author = "Comer" + +Click the Submit button, and you will be returned to the Book List page +with a "Book created" status message displayed. -Also note that this implementation allows you to can create books with +Also note that this implementation allows you to create books with any bogus information. Although we have constrained the authors with the drop-down list (note that this isn't bulletproof because we still have not prevented a user from "hacking" the form to specify other values), there are no restrictions on items such as the length of the title (for -example, you can create a one-letter title) and value for the rating +example, you can create a one-letter title) and the value of the rating (you can use any number you want, and even non-numeric values with SQLite). The next section will address this concern. @@ -307,7 +295,7 @@ the previous paragraph is that the I itself is not performing any validation. -=head1 C VALIDATION AND FILTERING +=head1 HTML::FormFu VALIDATION AND FILTERING Although the use of L in the previous section did provide an automated mechanism to build the form, the real power of @@ -464,16 +452,17 @@ bottom: =cut - sub formfu_edit :Local :FormConfig('books/formfu_create.yml') { - my ($self, $c, $id) = @_; + sub formfu_edit :Chained('object') :PathPart('formfu_edit') :Args(0) + :FormConfig('books/formfu_create.yml') { + my ($self, $c) = @_; - # Get the specified book - my $book = $c->model('DB::Books')->find($id); + # Get the specified book already saved by the 'object' method + my $book = $c->stash->{object}; # Make sure we were able to get a book unless ($book) { $c->flash->{error_msg} = "Invalid book -- Cannot edit"; - $c->response->redirect($c->uri_for('list')); + $c->response->redirect($c->uri_for($self->action_for('list'))); $c->detach; } @@ -489,14 +478,14 @@ bottom: # Set a status message for the user $c->flash->{status_msg} = 'Book edited'; # Return to the books list - $c->response->redirect($c->uri_for('list')); + $c->response->redirect($c->uri_for($self->action_for('list'))); $c->detach; } else { # Get the authors from the DB - my @authorObjs = $c->model("DB::Authors")->all(); + my @author_objs = $c->model("DB::Author")->all(); # Create an array of arrayrefs where each arrayref is an author my @authors; - foreach (sort {$a->last_name cmp $b->last_name} @authorObjs) { + foreach (sort {$a->last_name cmp $b->last_name} @author_objs) { push(@authors, [$_->id, $_->last_name]); } # Get the select added by the config file @@ -519,17 +508,25 @@ the common code in separate methods). The main differences are: =item * -We accept C<$id> as an argument via the URL. +We have to manually specify the name of the FormFu .yml file as an +argument to C<:FormConfig> because the name can no longer be +automatically deduced from the name of our action/method (by default, +FormFu would look for a file named C). =item * -We use C<$id> to look up the existing book from the database. +We load the book object from the stash (found using the $id passed to +the Chained object method) =item * -We make sure the C<$id> and book lookup returned a valid book. If not, -we set the error message and return to the book list. +We use C<$id> to look up the existing book from the database. + +=item * +We make sure the book lookup returned a valid book. If not, we set +the error message and return to the book list. + =item * If the form has been submitted and passes validation, we skip creating a @@ -553,9 +550,9 @@ following: ... [% # Add a link to delete a book %] - Delete + Delete [% # Add a link to edit a book %] - Edit + Edit ... @@ -579,6 +576,7 @@ Stevens as a co-author (control-click), and click Submit. You will then be returned to the book list with a "Book edited" message at the top in green. Experiment with other edits to various books. + =head2 More Things to Try You are now armed with enough knowledge to be dangerous. You can keep @@ -588,7 +586,7 @@ tweaking the example application; some things you might want to do: =item * -Add an appropriate ACL to the new Edit function. +Add an appropriate authorization check to the new Edit function. =item * @@ -610,6 +608,7 @@ Support the CRUD cycle for authors. Or you can proceed to write your own application, which is probably the real reason you worked through this Tutorial in the first place. + =head2 Config::General Config for this tutorial If you are having difficulty with YAML config above, please save the @@ -664,7 +663,6 @@ Apache config files. indicator submit - =head1 AUTHOR Kennedy Clark, C