=head1 NAME Catalyst::Manual::Tutorial::10_Appendices - Catalyst Tutorial - Chapter 10: Appendices =head1 OVERVIEW This is B for the Catalyst tutorial. L =over 4 =item 1 L =item 2 L =item 3 L =item 4 L =item 5 L =item 6 L =item 7 L =item 8 L =item 9 L =item 10 B<10_Appendices> =back =head1 DESCRIPTION This chapter of the tutorial provides supporting information relevant to the Catalyst tutorial. =head1 APPENDIX 1: CUT AND PASTE FOR POD-BASED EXAMPLES You may notice that Pod indents example code with four spaces. This section provides some quick advice to "un-indent" this text in common editors. =head2 "Un-indenting" with Vi/Vim When cutting and pasting multi-line text from Pod-based documents, the following vi/vim regexs can be helpful to "un-indent" the inserted text (do NOT type the quotes, they are only included to show spaces in the regex patterns). I: =over 4 =item * ":0,$s/^ " Removes four leading spaces from the entire file (from the first line, C<0>, to the last line, C<$>). =item * "%s/^ " A shortcut for the previous item (C<%> specifies the entire file; so this removes four leading spaces from every line). =item * ":.,$s/^ " Removes the first four spaces from the line the cursor is on at the time the regex command is executed (".") to the last line of the file. =item * ":.,44s/^ " Removes four leading space from the current line through line 44 (obviously adjust the C<44> to the appropriate value in your example). =back =head2 "Un-indenting" with Emacs Although the author has not used Emacs for many years (apologies to the Emacs fans out there), here is a quick hint to get you started. To replace the leading spaces of every line in a file, use: M-x replace-regexp Replace regexp: ^ with: All of that will occur on the single line at the bottom of your screen. Note that "" represents the return key/enter. Also, there are four spaces after the "^" on the "Replace regexp:" line and no spaces entered on the last line. You can limit the replacement operation by selecting text first (depending on your version of Emacs, you can either use the mouse or experiment with commands such as C to set the mark at the cursor location and C> and C> to set the mark at the beginning and end of the file respectively. Also, Stefan Kangas sent in the following tip about an alternate approach using the command C to redo the indentation for the currently selected region (adhering to indent rules in the current major mode). You can run the command by typing M-x indent-region or pressing the default keybinding C-M-\ in cperl-mode. Additional details can be found here: L =head1 APPENDIX 2: USING POSTGRESQL AND MYSQL The main database used in this tutorial is the very simple yet powerful L. This section provides information that can be used to "convert" the tutorial to use L and L. However, note that part of the beauty of the MVC architecture is that very little database-specific code is spread throughout the system (at least when MVC is "done right"). Consequently, converting from one database to another is relatively painless with most Catalyst applications. In general, you just need to adapt the schema definition C<.sql> file you use to initialize your database and adjust a few configuration parameters. Also note that the purpose of the data definition statements for this section are not designed to take maximum advantage of the various features in each database for issues such as referential integrity and field types/constraints. =head2 PostgreSQL Use the following steps to adapt the tutorial to PostgreSQL. Thanks to Caelum (Rafael Kitover) for assistance with the most recent updates, and Louis Moore, Marcello Romani and Tom Lanyon for help with earlier versions. =over 4 =item * Chapter 3: More Catalyst Basics =over 4 =item * Install the PostgreSQL server and client and DBD::Pg: If you are following along in Debian 5, you can quickly install these items via this command: sudo aptitude install postgresql libdbd-pg-perl libdatetime-format-pg-perl To configure the permissions, you can open C and change this line (near the bottom): # "local" is for Unix domain socket connections only local all all ident sameuser to: # "local" is for Unix domain socket connections only local all all trust And then restart PostgreSQL: sudo /etc/init.d/postgresql-8.3 restart =item * Create the database and a user for the database (note that we are using "EcatalystE" to represent the hidden password of "catalyst"): $ sudo -u postgres createuser -P catappuser Enter password for new role: Enter it again: Shall the new role be a superuser? (y/n) n Shall the new role be allowed to create databases? (y/n) n Shall the new role be allowed to create more new roles? (y/n) n CREATE ROLE $ sudo -u postgres createdb -O catappuser catappdb CREATE DATABASE =item * Create the C<.sql> file and load the data: =over 4 =item * Open the C in your editor and enter: -- -- Drops just in case you are reloading --- DROP TABLE IF EXISTS books CASCADE; DROP TABLE IF EXISTS authors CASCADE; DROP TABLE IF EXISTS book_authors CASCADE; DROP TABLE IF EXISTS users CASCADE; DROP TABLE IF EXISTS roles CASCADE; DROP TABLE IF EXISTS user_roles CASCADE; -- -- Create a very simple database to hold book and author information -- CREATE TABLE books ( id SERIAL PRIMARY KEY, title TEXT , rating INTEGER, -- Manually add these later -- created TIMESTAMP NOT NULL DEFAULT now(), -- updated TIMESTAMP ); CREATE TABLE authors ( id SERIAL PRIMARY KEY, first_name TEXT, last_name TEXT ); -- 'book_authors' is a many-to-many join table between books & authors CREATE TABLE book_authors ( book_id INTEGER REFERENCES books(id) ON DELETE CASCADE ON UPDATE CASCADE, author_id INTEGER REFERENCES authors(id) ON DELETE CASCADE ON UPDATE CASCADE, PRIMARY KEY (book_id, author_id) ); --- --- Load some sample data --- INSERT INTO books (title, rating) VALUES ('CCSP SNRS Exam Certification Guide', 5); INSERT INTO books (title, rating) VALUES ('TCP/IP Illustrated, Volume 1', 5); INSERT INTO books (title, rating) VALUES ('Internetworking with TCP/IP Vol.1', 4); INSERT INTO books (title, rating) VALUES ('Perl Cookbook', 5); INSERT INTO books (title, rating) VALUES ('Designing with Web Standards', 5); INSERT INTO authors (first_name, last_name) VALUES ('Greg', 'Bastien'); INSERT INTO authors (first_name, last_name) VALUES ('Sara', 'Nasseh'); INSERT INTO authors (first_name, last_name) VALUES ('Christian', 'Degu'); INSERT INTO authors (first_name, last_name) VALUES ('Richard', 'Stevens'); INSERT INTO authors (first_name, last_name) VALUES ('Douglas', 'Comer'); INSERT INTO authors (first_name, last_name) VALUES ('Tom', 'Christiansen'); INSERT INTO authors (first_name, last_name) VALUES ('Nathan', 'Torkington'); INSERT INTO authors (first_name, last_name) VALUES ('Jeffrey', 'Zeldman'); INSERT INTO book_authors VALUES (1, 1); INSERT INTO book_authors VALUES (1, 2); INSERT INTO book_authors VALUES (1, 3); INSERT INTO book_authors VALUES (2, 4); INSERT INTO book_authors VALUES (3, 5); INSERT INTO book_authors VALUES (4, 6); INSERT INTO book_authors VALUES (4, 7); INSERT INTO book_authors VALUES (5, 8); =item * Load the data: $ psql -U catappuser -W catappdb -f myapp01_psql.sql Password for user catappuser: psql:myapp01_psql.sql:8: NOTICE: CREATE TABLE will create implicit sequence "books_id_seq" for serial column "books.id" psql:myapp01_psql.sql:8: NOTICE: CREATE TABLE / PRIMARY KEY will create implicit index "books_pkey" for table "books" CREATE TABLE psql:myapp01_psql.sql:15: NOTICE: CREATE TABLE / PRIMARY KEY will create implicit index "book_authors_pkey" for table "book_authors" CREATE TABLE psql:myapp01_psql.sql:21: NOTICE: CREATE TABLE will create implicit sequence "authors_id_seq" for serial column "authors.id" psql:myapp01_psql.sql:21: NOTICE: CREATE TABLE / PRIMARY KEY will create implicit index "authors_pkey" for table "authors" CREATE TABLE INSERT 0 1 INSERT 0 1 INSERT 0 1 ... =item * Make sure the data loaded correctly: $ psql -U catappuser -W catappdb Password for user catappuser: Welcome to psql 8.3.7, the PostgreSQL interactive terminal. Type: \copyright for distribution terms \h for help with SQL commands \? for help with psql commands \g or terminate with semicolon to execute query \q to quit catappdb=> \dt List of relations Schema | Name | Type | Owner --------+--------------+-------+------------ public | authors | table | catappuser public | book_authors | table | catappuser public | books | table | catappuser (3 rows) catappdb=> select * from books; id | title | rating ----+------------------------------------+-------- 1 | CCSP SNRS Exam Certification Guide | 5 2 | TCP/IP Illustrated, Volume 1 | 5 3 | Internetworking with TCP/IP Vol.1 | 4 4 | Perl Cookbook | 5 5 | Designing with Web Standards | 5 (5 rows) catappdb=> =back =item * After the steps where you: edit lib/MyApp.pm create lib/MyAppDB.pm create lib/MyAppDB/Book.pm create lib/MyAppDB/Author.pm create lib/MyAppDB/BookAuthor.pm =item * Generate the model using the Catalyst "_create.pl" script: $ rm lib/MyApp/Model/DB.pm # Delete just in case already there $ script/myapp_create.pl model DB DBIC::Schema MyApp::Schema \ create=static components=TimeStamp,EncodedColumn \ 'dbi:Pg:dbname=catappdb' 'catappuser' 'catalyst' '{ AutoCommit => 1 }' =back =item * Chapter 4: Basic CRUD Add Datetime Columns to Our Existing Books Table $ psql -U catappuser -W catappdb ... catappdb=> ALTER TABLE books ADD created TIMESTAMP NOT NULL DEFAULT now(); ALTER TABLE catappdb=> ALTER TABLE books ADD updated TIMESTAMP; ALTER TABLE catappdb=> \q Re-generate the model using the Catalyst "_create.pl" script: $ script/myapp_create.pl model DB DBIC::Schema MyApp::Schema \ create=static components=TimeStamp,EncodedColumn \ 'dbi:Pg:dbname=catappdb' 'catappuser' 'catalyst' '{ AutoCommit => 1 }' =item * Chapter 5: Authentication =over 4 =item * Create the C<.sql> file for the user/roles data: Open C in your editor and enter: -- -- Add users and roles tables, along with a many-to-many join table -- CREATE TABLE users ( id SERIAL PRIMARY KEY, username TEXT, password TEXT, email_address TEXT, first_name TEXT, last_name TEXT, active INTEGER ); CREATE TABLE roles ( id SERIAL PRIMARY KEY, role TEXT ); CREATE TABLE user_roles ( user_id INTEGER REFERENCES users(id) ON DELETE CASCADE ON UPDATE CASCADE, role_id INTEGER REFERENCES roles(id) ON DELETE CASCADE ON UPDATE CASCADE, PRIMARY KEY (user_id, role_id) ); -- -- Load up some initial test data -- INSERT INTO users (username, password, email_address, first_name, last_name, active) VALUES ('test01', 'mypass', 't01@na.com', 'Joe', 'Blow', 1); INSERT INTO users (username, password, email_address, first_name, last_name, active) VALUES ('test02', 'mypass', 't02@na.com', 'Jane', 'Doe', 1); INSERT INTO users (username, password, email_address, first_name, last_name, active) VALUES ('test03', 'mypass', 't03@na.com', 'No', 'Go', 0); INSERT INTO roles (role) VALUES ('user'); INSERT INTO roles (role) VALUES ('admin'); INSERT INTO user_roles VALUES (1, 1); INSERT INTO user_roles VALUES (1, 2); INSERT INTO user_roles VALUES (2, 1); INSERT INTO user_roles VALUES (3, 1); =item * Load the data: $ psql -U catappuser -W catappdb -f myapp02_psql.sql Password for user catappuser: psql:myapp02_psql.sql:13: NOTICE: CREATE TABLE will create implicit sequence "users_id_seq" for serial column "users.id" psql:myapp02_psql.sql:13: NOTICE: CREATE TABLE / PRIMARY KEY will create implicit index "users_pkey" for table "users" CREATE TABLE psql:myapp02_psql.sql:18: NOTICE: CREATE TABLE will create implicit sequence "roles_id_seq" for serial column "roles.id" psql:myapp02_psql.sql:18: NOTICE: CREATE TABLE / PRIMARY KEY will create implicit index "roles_pkey" for table "roles" CREATE TABLE psql:myapp02_psql.sql:24: NOTICE: CREATE TABLE / PRIMARY KEY will create implicit index "user_roles_pkey" for table "user_roles" CREATE TABLE INSERT 0 1 INSERT 0 1 INSERT 0 1 INSERT 0 1 INSERT 0 1 INSERT 0 1 INSERT 0 1 INSERT 0 1 INSERT 0 1 Confirm with: $ psql -U catappuser -W catappdb -c "select * from users" Password for user catappuser: id | username | password | email_address | first_name | last_name | active ----+----------+----------+---------------+------------+-----------+-------- 1 | test01 | mypass | t01@na.com | Joe | Blow | 1 2 | test02 | mypass | t02@na.com | Jane | Doe | 1 3 | test03 | mypass | t03@na.com | No | Go | 0 (3 rows) =item * Modify C to match the following (the only difference is the C line): #!/usr/bin/perl use strict; use warnings; use MyApp::Schema; my $schema = MyApp::Schema->connect('dbi:Pg:dbname=catappdb', 'catappuser', 'catalyst'); my @users = $schema->resultset('Users')->all; foreach my $user (@users) { $user->password('mypass'); $user->update; } Run the C as per the "normal" flow of the tutorial: $ perl -Ilib set_hashed_passwords.pl You can verify that it worked with this command: $ psql -U catappuser -W catappdb -c "select * from users" =back =back =head2 MySQL B This section is out of date with the rest of the tutorial. Consider using SQLite or PostgreSQL since they are current. Use the following steps to adapt the tutorial to MySQL. Thanks to Jim Howard for the help. =over 4 =item * Chapter 3: Catalyst Basics =over 4 =item * Install the required software: =over 4 =item * The MySQL database server and client utility. =item * The Perl C module =back For CentOS users (see L), you can use the following commands to install the software and start the MySQL daemon: yum -y install mysql mysql-server service mysqld start =item * Create the database and set the permissions: $ mysql Welcome to the MySQL monitor. Commands end with ; or \g. Your MySQL connection id is 2 to server version: 4.1.20 Type 'help;' or '\h' for help. Type '\c' to clear the buffer. mysql> create database myapp; Query OK, 1 row affected (0.01 sec) mysql> grant all on myapp.* to tutorial@'localhost'; Query OK, 0 rows affected (0.00 sec) mysql> flush privileges; Query OK, 0 rows affected (0.00 sec) mysql> quit Bye =item * Create the C<.sql> file and load the data: =over 4 =item * Open the C in your editor and enter: -- -- Create a very simple database to hold book and author information -- DROP TABLE IF EXISTS books; DROP TABLE IF EXISTS book_authors; DROP TABLE IF EXISTS authors; CREATE TABLE books ( id INT(11) PRIMARY KEY AUTO_INCREMENT, title TEXT , rating INT(11) ); -- 'book_authors' is a many-to-many join table between books & authors CREATE TABLE book_authors ( book_id INT(11), author_id INT(11), PRIMARY KEY (book_id, author_id) ); CREATE TABLE authors ( id INT(11) PRIMARY KEY AUTO_INCREMENT, first_name TEXT, last_name TEXT ); --- --- Load some sample data --- INSERT INTO books VALUES (1, 'CCSP SNRS Exam Certification Guide', 5); INSERT INTO books VALUES (2, 'TCP/IP Illustrated, Volume 1', 5); INSERT INTO books VALUES (3, 'Internetworking with TCP/IP Vol.1', 4); INSERT INTO books VALUES (4, 'Perl Cookbook', 5); INSERT INTO books VALUES (5, 'Designing with Web Standards', 5); INSERT INTO authors VALUES (1, 'Greg', 'Bastien'); INSERT INTO authors VALUES (2, 'Sara', 'Nasseh'); INSERT INTO authors VALUES (3, 'Christian', 'Degu'); INSERT INTO authors VALUES (4, 'Richard', 'Stevens'); INSERT INTO authors VALUES (5, 'Douglas', 'Comer'); INSERT INTO authors VALUES (6, 'Tom', 'Christiansen'); INSERT INTO authors VALUES (7, ' Nathan', 'Torkington'); INSERT INTO authors VALUES (8, 'Jeffrey', 'Zeldman'); INSERT INTO book_authors VALUES (1, 1); INSERT INTO book_authors VALUES (1, 2); INSERT INTO book_authors VALUES (1, 3); INSERT INTO book_authors VALUES (2, 4); INSERT INTO book_authors VALUES (3, 5); INSERT INTO book_authors VALUES (4, 6); INSERT INTO book_authors VALUES (4, 7); INSERT INTO book_authors VALUES (5, 8); =item * Load the data: mysql -ututorial myapp < myapp01_mysql.sql =item * Make sure the data loaded correctly: $ mysql -ututorial myapp Reading table information for completion of table and column names You can turn off this feature to get a quicker startup with -A Welcome to the MySQL monitor. Commands end with ; or \g. Your MySQL connection id is 4 to server version: 4.1.20 Type 'help;' or '\h' for help. Type '\c' to clear the buffer. mysql> show tables; +-----------------+ | Tables_in_myapp | +-----------------+ | authors | | book_authors | | books | +-----------------+ 3 rows in set (0.00 sec) mysql> select * from books; +----+------------------------------------+--------+ | id | title | rating | +----+------------------------------------+--------+ | 1 | CCSP SNRS Exam Certification Guide | 5 | | 2 | TCP/IP Illustrated, Volume 1 | 5 | | 3 | Internetworking with TCP/IP Vol.1 | 4 | | 4 | Perl Cookbook | 5 | | 5 | Designing with Web Standards | 5 | +----+------------------------------------+--------+ 5 rows in set (0.00 sec) mysql> =back =item * Update the model: =over 4 =item * Delete the existing model: rm lib/MyApp/Model/MyAppDB.pm =item * Regenerate the model using the Catalyst "_create.pl" script: script/myapp_create.pl model DB DBIC::Schema MyApp::Schema \ dbi:mysql:myapp '_username_here_' '_password_here_' '{ AutoCommit => 1 }' =back =back =item * Chapter 5: Authentication =over 4 =item * Create the C<.sql> file for the user/roles data: Open C in your editor and enter: -- -- Add users and roles tables, along with a many-to-many join table -- CREATE TABLE users ( id INT(11) PRIMARY KEY, username TEXT, password TEXT, email_address TEXT, first_name TEXT, last_name TEXT, active INT(11) ); CREATE TABLE roles ( id INTEGER PRIMARY KEY, role TEXT ); CREATE TABLE user_roles ( user_id INT(11), role_id INT(11), PRIMARY KEY (user_id, role_id) ); -- -- Load up some initial test data -- INSERT INTO users VALUES (1, 'test01', 'mypass', 't01@na.com', 'Joe', 'Blow', 1); INSERT INTO users VALUES (2, 'test02', 'mypass', 't02@na.com', 'Jane', 'Doe', 1); INSERT INTO users VALUES (3, 'test03', 'mypass', 't03@na.com', 'No', 'Go', 0); INSERT INTO roles VALUES (1, 'user'); INSERT INTO roles VALUES (2, 'admin'); INSERT INTO user_roles VALUES (1, 1); INSERT INTO user_roles VALUES (1, 2); INSERT INTO user_roles VALUES (2, 1); INSERT INTO user_roles VALUES (3, 1); =item * Load the user/roles data: mysql -ututorial myapp < myapp02_mysql.sql =item * Create the C<.sql> file for the hashed password data: Open C in your editor and enter: -- -- Convert passwords to SHA-1 hashes -- UPDATE users SET password = 'e727d1464ae12436e899a726da5b2f11d8381b26' WHERE id = 1; UPDATE users SET password = 'e727d1464ae12436e899a726da5b2f11d8381b26' WHERE id = 2; UPDATE users SET password = 'e727d1464ae12436e899a726da5b2f11d8381b26' WHERE id = 3; =item * Load the user/roles data: mysql -ututorial myapp < myapp03_mysql.sql =back =back =head1 AUTHOR Kennedy Clark, C Please report any errors, issues or suggestions to the author. The most recent version of the Catalyst Tutorial can be found at L. Copyright 2006-2010, Kennedy Clark, under Creative Commons License (L).