Minor updates: Fix filename for initial tests and latest H::FormFu version

[catagits/Catalyst-Manual.git] / lib / Catalyst / Manual / Tutorial / Intro.pod

=head1 NAME

Catalyst::Manual::Tutorial::Intro - Catalyst Tutorial - Part 1: Introduction


=head1 OVERVIEW

This is B<Part 1 of 10> for the Catalyst tutorial.

L<Tutorial Overview|Catalyst::Manual::Tutorial>

=over 4

=item 1

B<Introduction>

=item 2

L<Catalyst Basics|Catalyst::Manual::Tutorial::CatalystBasics>

=item 3

L<More Catalyst Basics|Catalyst::Manual::Tutorial::MoreCatalystBasics>

=item 4

L<Basic CRUD|Catalyst::Manual::Tutorial::BasicCRUD>

=item 5

L<Authentication|Catalyst::Manual::Tutorial::Authentication>

=item 6

L<Authorization|Catalyst::Manual::Tutorial::Authorization>

=item 7

L<Debugging|Catalyst::Manual::Tutorial::Debugging>

=item 8

L<Testing|Catalyst::Manual::Tutorial::Testing>

=item 9

L<Advanced CRUD|Catalyst::Manual::Tutorial::AdvancedCRUD>

=item 10

L<Appendices|Catalyst::Manual::Tutorial::Appendices>

=back


=head1 DESCRIPTION

This tutorial provides a multi-part introduction to the Catalyst web
framework. It seeks to provide a rapid overview of many of its most
commonly used features. The focus is on the real-world best practices
required in the construction of nearly all Catalyst applications.

Although the primary target of the tutorial is users new to the Catalyst
framework, experienced users may wish to review specific sections (for
example, how to use DBIC for their model classes, how to add
authentication and authorization to an existing application, or form
management).

You can obtain the code for all the tutorial examples from the
catalyst subversion repository by issuing the command:

    svn co http://dev.catalyst.perl.org/repos/Catalyst/trunk/examples/Tutorial/ CatalystTutorial

This will download the most recent tarball for each part of the 
tutorial into the CatalystTutorial directory on your machine. 

B<These reference implementations are provided so that when you follow
the tutorial, you can use the code from the subversion repository to
ensure that your system is set up correctly, and that you have not
inadvertently made any typographic errors, or accidentally skipped
part of the tutorial.>

B<NOTE: You can use any Perl-supported OS and environment to run 
Catalyst.> It should make little or no difference to Catalyst's 
operation, B<but this tutorial has been written using Ubuntu 8.10> 
because that represents a quick and easy for most people to try out 
Catalyst with virtually zero setup time and hassles.  Also, the tutorial 
has been tested to work correctly with the versions of Catalyst and all 
the supporting modules in Ubuntu 8.10 (see "VERSIONS AND CONVENTIONS 
USED IN THIS TUTORIAL" below for the specific versions for some of the 
key modules), so B<if you think you might be running into an issue 
related to versions> (for example, a module changed its behavior in a 
newer version or a bug was introduced), B<it might be worth giving 
Ubuntu 8.10 a try>.  See the "CATALYST INSTALLATION" section below for 
more information.

If you're reading this manual online, you can download the example 
program and all the necessary dependencies to your local machine by 
installing the C<Task::Catalyst::Tutorial> distribution from CPAN:

     cpan Task::Catalyst::Tutorial

This will also test to make sure the dependencies are working.  If you
have trouble installing these, please ask for help on the #catalyst
IRC channel, or the Catalyst mailing list.

Subjects covered by the tutorial include:

=over 4

=item * 

A simple application that lists and adds books.

=item *

The use of L<DBIx::Class|DBIx::Class> (DBIC) for the model.

=item * 

How to write CRUD (Create, Read, Update, and Delete) operations in
Catalyst.

=item *

Authentication ("auth").

=item * 

Role-based authorization ("authz").

=item * 

Attempts to provide an example showing current (5.7XXX) Catalyst
practices. For example, the use of 
L<Catalyst::Action::RenderView|Catalyst::Action::RenderView>,
DBIC, L<Catalyst::Plugin::ConfigLoader|Catalyst::Plugin::ConfigLoader> 
with C<myapp.conf>, the use of C<lib/MyApp/Controller/Root.pm> 
vs. C<lib/MyApp.pm>, etc.

=item * 

The use of Template Toolkit (TT).

=item * 

Useful techniques for troubleshooting and debugging Catalyst
applications.

=item * 

The use of SQLite as a database (with code also provided for MySQL and
PostgreSQL).

=item * 

The use of L<HTML::FormFu|HTML::FormFu> for automated form processing 
and validation.

=back

This tutorial makes the learning process its main priority.  For
example, the level of comments in the code found here would likely be
considered excessive in a "normal project."  Because of their contextual
value, this tutorial will generally favor inline comments over a
separate discussion in the text.  It also deliberately tries to
demonstrate multiple approaches to various features (in general, you
should try to be as consistent as possible with your own production
code).

Furthermore, this tutorial tries to minimize the number of controllers,
models, TT templates, and database tables.  Although this does result in
things being a bit contrived at times, the concepts should be applicable
to more complex environments.  More complete and complicated example
applications can be found in the C<examples> area of the Catalyst
Subversion repository at
L<http://dev.catalyst.perl.org/repos/Catalyst/trunk/examples/>.


=head1 VERSIONS AND CONVENTIONS USED IN THIS TUTORIAL

This tutorial was built using the following resources. Please note that
you may need to make adjustments for different environments and
versions:

=over 4

=item * 

Ubuntu 8.10 (Intrepid Ibex)

=item * 

Catalyst v5.7014

=item *

Catalyst::Devel v1.07

=item * 

DBIx::Class v0.08010

=item * 

Catalyst Plugins

The plugins used in this tutorial all have sufficiently stable APIs that
you shouldn't need to worry about versions. However, there could be
cases where the tutorial is affected by what version of plugins you
use. This tutorial has been tested against the following set of plugins:

=over 4

=item * 

Catalyst::Plugin::Authentication -- v0.10006

=item *

Catalyst::Plugin::Authorization::ACL -- v0.08

=item *

Catalyst::Plugin::Authorization::Roles -- v0.05

=item *

Catalyst::Plugin::ConfigLoader -- v0.20

=item *

Catalyst::Plugin::Session -- v0.19

=item *

Catalyst::Plugin::Session::State::Cookie -- v0.09

=item *

Catalyst::Plugin::Session::Store::FastMmap -- v0.05

=item *

Catalyst::Plugin::StackTrace -- v0.08

=item *

Catalyst::Plugin::Static::Simple -- v0.20

=back

=item * 

B<NOTE:> You can check the versions you have installed with the
following command:

    perl -ME<lt>mod_nameE<gt> -e '"print $E<lt>mod_nameE<gt>::VERSION\n"'

For example:
    perl -MCatalyst::Plugin::StackTrace -e 'print "$Catalyst::Plugin::StackTrace::VERSION\n"'

Since the web browser is being used on the same box where Perl and the
Catalyst development server is running, the URL of
C<http://localhost:3000> will be used (the Catalyst development server
defaults to port 3000).  If you are running Perl on a different box than
where your web browser is located (or using a different port number via
the C<-p> I<port_number> option to the development server), then you
will need to update the URL you use accordingly.

=item * 

Depending on the web browser you are using, you might need to hit 
C<Shift+Reload> or C<Ctrl+Reload> to pull a fresh page when testing 
your application at various points (see 
L<http://en.wikipedia.org/wiki/Bypass_your_cache> for a comprehensive
list of options for each browser).  Also, the C<-k> keepalive option 
to the development server can be necessary with some browsers 
(especially Internet Explorer).

=back


=head1 CATALYST INSTALLATION

While the rough edges of Catalyst installation have been a problem in
the past, this is now mostly solved.  Nonetheless, installing Catalyst
can be a little time consuming. Although a compelling strength of
Catalyst is that it makes use of many of the modules in the vast
repository that is CPAN, this can complicate the installation process.
However, there are a growing number of methods that can dramatically
ease this undertaking.  Of these, the following are likely to be
applicable to the largest number of potential new users:

=over 4

=item *

Ubuntu

Given the popularity of Ubuntu and its ease of use, Ubuntu can be a 
great way for newcomers to experiment with Catalyst.  Because it is a 
"live CD," you can simply boot from the CD, run a few commands, and you 
should have a fully functional environment in which to do this tutorial 
in a matter of minutes.  B<The tutorial was fully tested to work under 
Ubuntu 8.10.  Although it SHOULD work under any Catalyst installation 
method you might choose, it can be hard to guarantee this.>

=over 4

=item * 

Download Ubuntu 8.10 (aka, Intrepid Ibex) Desktop edition and boot from 
the CD and/or image file, select your language, and then "Try Ubuntu 
without any changes to your computer."

=item *

Open a terminal session (click "Applications" in the upper-left 
corner, then "Accessories," then "Terminal").

=item *

Add the 'universe' repositories:

    sudo gedit /etc/apt/sources.list

And remove the comments from the lines under the comments about the
'universe' repositories.

=item *

Install Catalyst:

    sudo apt-get update
    sudo apt-get install libdbd-sqlite3-perl libcatalyst-perl libcatalyst-modules-perl libconfig-general-perl

Accept all of the dependencies.  Done.  

If you are running from the Live CD, you probably also want to free up 
some disk space with the following:

    sudo apt-get clean

NOTE: While the instructions above mention the Live CD because that 
makes it easy for people new to Linux, you can obviously also use one 
of the options to install Ubuntu on your drive.

=back

=item * 

Matt Trout's C<cat-install>

Available at L<http://www.shadowcatsystems.co.uk/static/cat-install>, 
C<cat-install> can be a fairly painless way to get Catalyst up and 
running.  Just download the script from the link above and type C<perl 
cat-install>.  Depending on the speed of your Internet connection and 
your computer, it will probably take 30 to 60 minutes to install because 
it downloads, makes, compiles, and tests every module.  But this is an 
excellent way to automate the installation of all the latest modules 
used by Catalyst from CPAN.


=item * 

Other Possibilities

=over 4

=item *

OpenBSD Packages

The 2008 Advent Day 4 entry has more information on using OpenBSD 
packages to quickly build a system: 
L<http://www.catalystframework.org/calendar/2008/4>.

=item *

NetBSD Package Collection on Solaris

The 2008 Advent Day 15 entry has more information on using C<pkgsrc> and 
NetBSD packages on Solaris: 
L<http://www.catalystframework.org/calendar/2008/15|>.

=item * 

CatInABox

You can get more information at 
L<http://www.catalystframework.org/calendar/2008/7>
or L<Perl::Dist::CatInABox|Perl::Dist::CatInABox>.


=item *

Pre-Built VMWare Images

Under the VMWare community program, work is ongoing to develop a number
of VMWare images where an entire Catalyst development environment has
already been installed, complete with database engines and a full
complement of Catalyst plugins.

=item * 

Frank Speiser's Amazon EC2 Catalyst SDK

There are currently two flavors of publicly available Amazon Machine
Images (AMI) that include all the elements you'd need to begin
developing in a fully functional Catalyst environment within minutes.
See L<Catalyst::Manual::Installation|Catalyst::Manual::Installation>
for more details.

=back

=back

For additional information and recommendations on Catalyst installation,
please refer to 
L<Catalyst::Manual::Installation|Catalyst::Manual::Installation>.

B<NOTE:> Step-by-step instructions to replicate the environment on
which this tutorial was developed can be found at
L<Catalyst::Manual::Installation::CentOS4|Catalyst::Manual::Installation::CentOS4>. 
Using these instructions, you should be able to build a complete CentOS
4.X server with Catalyst and all the plugins required to run this
tutorial.


=head1 DATABASES

This tutorial will primarily focus on SQLite because of its simplicity
of installation and use; however, modifications in the script required
to support MySQL and PostgreSQL will be presented in Appendix 2.

B<Note:> One of the advantages of the MVC design patterns is that
applications become much more database independent.  As such, you will
notice that only the C<.sql> files used to initialize the database
change between database systems: the Catalyst code generally remains the
same.


=head1 WHERE TO GET WORKING CODE

Each part of the tutorial has complete code available as a tarball in 
the main Catalyst Subversion repository (see the note at the beginning 
of each part for the appropriate svn command to use).

B<NOTE:> You can run the test cases for the final code through Part 8 
with the following commands:

    wget http://dev.catalyst.perl.org/repos/Catalyst/trunk/examples/Tutorial/MyApp_Part8.tgz
    tar zxvf MyApp_Part8.tgz
    cd MyApp
    CATALYST_DEBUG=0 prove --lib lib  t


=head1 AUTHOR

Kennedy Clark, C<hkclark@gmail.com>

Please report any errors, issues or suggestions to the author.  The
most recent version of the Catalyst Tutorial can be found at
L<http://dev.catalyst.perl.org/repos/Catalyst/Catalyst-Manual/5.70/trunk/lib/Catalyst/Manual/Tutorial/>.

Copyright 2006-2008, Kennedy Clark, under Creative Commons License
(L<http://creativecommons.org/licenses/by-sa/3.0/us/>).