[catagits/Catalyst-Manual.git] / lib / Catalyst / Manual / Tutorial / 07_Debugging.pod

=head1 NAME

Catalyst::Manual::Tutorial::07_Debugging - Catalyst Tutorial - Chapter 7: Debugging


=head1 OVERVIEW

This is B<Chapter 7 of 10> for the Catalyst tutorial.

L<Tutorial Overview|Catalyst::Manual::Tutorial>

=over 4

=item 1

L<Introduction|Catalyst::Manual::Tutorial::01_Intro>

=item 2

L<Catalyst Basics|Catalyst::Manual::Tutorial::02_CatalystBasics>

=item 3

L<More Catalyst Basics|Catalyst::Manual::Tutorial::03_MoreCatalystBasics>

=item 4

L<Basic CRUD|Catalyst::Manual::Tutorial::04_BasicCRUD>

=item 5

L<Authentication|Catalyst::Manual::Tutorial::05_Authentication>

=item 6

L<Authorization|Catalyst::Manual::Tutorial::06_Authorization>

=item 7

B<07_Debugging>

=item 8

L<Testing|Catalyst::Manual::Tutorial::08_Testing>

=item 9

L<Advanced CRUD|Catalyst::Manual::Tutorial::09_AdvancedCRUD>

=item 10

L<Appendices|Catalyst::Manual::Tutorial::10_Appendices>

=back


=head1 DESCRIPTION

This chapter of the tutorial takes a brief look at the primary options 
available for troubleshooting Catalyst applications.

Note that when it comes to debugging and troubleshooting, there are two
camps:

=over 4

=item * 

Fans of C<log> and C<print> statements embedded in the code.

=item * 

Fans of interactive debuggers.

=back

Catalyst is able to easily accommodate both styles of debugging.


=head1 LOG STATEMENTS

Folks in the former group can use Catalyst's C<$c-E<gt>log> facility. 
(See L<Catalyst::Log|Catalyst::Log> for more detail.) For example, if 
you add the following code to a controller action method:

    $c->log->info("Starting the foreach loop here");

    $c->log->debug("Value of \$id is: ".$id);

Then the Catalyst development server will display your message along
with the other debug output. To accomplish the same thing in a TT
template view use:

    [% c.log.debug("This is a test log message") %]

As with many other logging facilities, you a method is defined for
each of the following "logging levels" (in increasing order of
severity/importance):

    $c->log->debug
    $c->log->info
    $c->log->warn
    $c->log->error
    $c->log->fatal

You can also use L<Data::Dumper|Data::Dumper> in both Catalyst code 
(C<use Data::Dumper; $c-E<gt>log-E<gt>debug("\$var is: ".Dumper($var));)>) 
and TT templates (C<[% Dumper.dump(book) %]>.


=head1 RUNNING CATALYST UNDER THE PERL DEBUGGER

Members of the interactive-debugger fan club will also be at home with
Catalyst applications.  One approach to this style of Perl debugging is
to embed breakpoints in your code.  For example, open
C<lib/MyApp/Controller/Books.pm> in your editor and add the
C<DB::single=1> line as follows inside the C<list> method (I like to
"left-justify" my debug statements so I don't forget to remove them, but
you can obviously indent them if you prefer):

    sub list : Local {
        # Retrieve the usual Perl OO '$self' for this object. $c is the Catalyst
        # 'Context' that's used to 'glue together' the various components
        # that make up the application
        my ($self, $c) = @_;
    
    $DB::single=1;
            
        # Retrieve all of the book records as book model objects and store in the
        # stash where they can be accessed by the TT template
        $c->stash->{books} = [$c->model('DB::Book')->all];
            
        # Set the TT template to use.  You will almost always want to do this
        # in your action methods.
        $c->stash->{template} = 'books/list.tt2';
    }

This causes the Perl Debugger to enter "single step mode" when this command is 
encountered (it has no effect when Perl is run without the C<-d> flag).

B<NOTE:> The C<DB> here is the Perl Debugger, not the DB model.

If you haven't done it already, enable SQL logging as before:

    $ export DBIC_TRACE=1

To now run the Catalyst development server under the Perl debugger, simply 
prepend C<perl -d> to the front of C<script/myapp_server.pl>:

    $ perl -d script/myapp_server.pl

This will start the interactive debugger and produce output similar to:

    $ perl -d script/myapp_server.pl  
    
    Loading DB routines from perl5db.pl version 1.3
    Editor support available.
    
    Enter h or `h h' for help, or `man perldebug' for more help.
    
    main::(script/myapp_server.pl:16):      my $debug         = 0;
    
      DB<1> 

Press the C<c> key and hit C<Enter> to continue executing the Catalyst
development server under the debugger.  Although execution speed will be
slightly slower than normal, you should soon see the usual Catalyst
startup debug information.

Now point your browser to L<http://localhost:3000/books/list> and log
in.  Once the breakpoint is encountered in the
C<MyApp::Controller::list> method, the console session running the
development server will drop to the Perl debugger prompt:

    MyApp::Controller::Books::list(/home/me/MyApp/script/../lib/MyApp/Controller/Books.pm:48):
    48:         $c->stash->{books} = [$c->model('DB::Book')->all];
    
      DB<1>

You now have the full Perl debugger at your disposal.  First use the
C<next> feature by typing C<n> to execute the C<all> method on the Book
model (C<n> jumps over method/subroutine calls; you can also use C<s> to
C<single-step> into methods/subroutines):

      DB<1> n
    SELECT me.id, me.title, me.rating, me.created, me.updated FROM book me:
    MyApp::Controller::Books::list(/home/me/MyApp/script/../lib/MyApp/Controller/Books.pm:53):
    53:         $c->stash->{template} = 'books/list.tt2';
    
      DB<1>

This takes you to the next line of code where the template name is set.
Notice that because we enabled C<DBIC_TRACE=1> earlier, SQL debug 
output also shows up in the development server debug information.

Next, list the methods available on our C<Book> model:

      DB<1> m $c->model('DB::Book')
    ()
    (0+
    (bool
    __result_class_accessor
    __source_handle_accessor
    _add_alias
    __bool
    _build_unique_query
    _calculate_score
    _collapse_cond
    <lines removed for brevity>
    
      DB<2>

We can also play with the model directly:

      DB<2> x ($c->model('DB::Book')->all)[1]->title
    SELECT me.id, me.title, me.rating, me.created, me.updated FROM book me:
    0  'TCP/IP Illustrated, Volume 1'

This uses the Perl debugger C<x> command to display the title of a book.

Next we inspect the C<books> element of the Catalyst C<stash> (the C<4>
argument to the C<x> command limits the depth of the dump to 4 levels):

      DB<3> x 4 $c->stash->{books}
    0  ARRAY(0xa8f3b7c)
       0  MyApp::Model::DB::Book=HASH(0xb8e702c)
          '_column_data' => HASH(0xb8e5e2c)
             'created' => '2009-05-08 10:19:46'
             'id' => 1
             'rating' => 5
             'title' => 'CCSP SNRS Exam Certification Guide'
             'updated' => '2009-05-08 10:19:46'
          '_in_storage' => 1
    <lines removed for brevity>

Then enter the C<c> command to continue processing until the next
breakpoint is hit (or the application exits):

      DB<4> c
    SELECT author.id, author.first_name, author.last_name FROM ...

Finally, press C<Ctrl+C> to break out of the development server.
Because we are running inside the Perl debugger, you will drop to the
debugger prompt.  

    ^CCatalyst::Engine::HTTP::run(/usr/local/share/perl/5.10.0/Catalyst/Engine/HTTP.pm:260):
    260:            while ( accept( Remote, $daemon ) ) {

    DB<4>

Finally, press C<q> to exit the debugger and return to your OS
shell prompt:

      DB<4> q
    $

For more information on using the Perl debugger, please see C<perldebug>
and C<perldebtut>.  For those daring souls out there, you can dive down
even deeper into the magical depths of this fine debugger by checking
out C<perldebguts>.

You can also type C<h> or C<h h> at the debugger prompt to view the
built-in help screens.

For an excellent book covering all aspects of the Perl debugger, we highly
recommend reading 'Pro Perl Debugging' by Richard Foley.

Oh yeah, before you forget, be sure to remove the C<DB::single=1> line you
added above in C<lib/MyApp/Controller/Books.pm>.

=head1 DEBUGGING MODULES FROM CPAN

Although the techniques discussed above work well for code you are 
writing, what if you want to use print/log/warn messages or set 
breakpoints in code that you have installed from CPAN (or in module that 
ship with Perl)?  One helpful approach is to place a copy of the module 
inside the C<lib> directory of your Catalyst project.  When Catalyst 
loads, it will load from inside your C<lib> directory first, only 
turning to the global modules if a local copy cannot be found.  You can 
then make modifications such as adding a C<$DB::single=1> to the local 
copy of the module without risking the copy in the original location. 
This can also be a great way to "locally override" bugs in modules while 
you wait for a fix on CPAN.


Matt Trout has suggested the following shortcut to create a local
copy of an installed module:

    mkdir -p lib/Module; cp `perldoc -l Module::Name` lib/Module/

Note: If you are following along in Debian 5 or Ubuntu, you will
need to install the C<perl-doc> package to use the C<perldoc> command.  
Use C<sudo aptitude install perl-doc> to do that.

For example, you could make a copy of 
L<Catalyst::Plugin::Authentication|Catalyst::Plugin::Authentication>
with the following command:

    mkdir -p lib/Catalyst/Plugin; cp \
        `perldoc -l Catalyst::Plugin::Authentication` lib/Catalyst/Plugin

You can then use the local copy inside your project to place logging
messages and/or breakpoints for further study of that module.

B<Note:> Matt has also suggested the following tips for Perl 
debugging:

=over 4

=item * 

Check the version of an installed module:

    perl -M<mod_name> -e 'print "$<mod_name>::VERSION\n"'

For example:

    $ perl -MCatalyst::Plugin::Authentication -e \
        'print $Catalyst::Plugin::Authentication::VERSION;'
    0.07

and if you are using bash aliases:

    alias pmver="perl -le '\$m = shift; eval qq(require \$m) \
        or die qq(module \"\$m\" is not installed\\n); \
        print \$m->VERSION'"

=item * 

Check if a modules contains a given method:

    perl -MModule::Name -e 'print Module::Name->can("method");'

For example:

    $ perl -MCatalyst::Plugin::Authentication -e \
        'print Catalyst::Plugin::Authentication->can("user");'
    CODE(0x9c8db2c)

If the method exists, the Perl C<can> method returns a coderef.
Otherwise, it returns undef and nothing will be printed.

=back


=head1 TT DEBUGGING

If you run into issues during the rendering of your template, it might 
be helpful to enable TT C<DEBUG> options.  You can do this in a Catalyst 
environment by adding a C<DEBUG> line to the C<__PACKAGE__->config> 
declaration in C<lib/MyApp/View/TT.pm>:

    __PACKAGE__->config({
        TEMPLATE_EXTENSION => '.tt2',
        DEBUG              => 'undef',
    });

There are a variety of options you can use, such as 'undef', 'all', 
'service', 'context', 'parser' and 'provider'.  See 
L<Template::Constants|Template::Constants> for more information 
(remove the C<DEBUG_> portion of the name shown in the TT docs and 
convert to lower case for use inside Catalyst).

B<NOTE:> B<Please be sure to disable TT debug options before continuing 
with the tutorial> (especially the 'undef' option -- leaving this 
enabled will conflict with several of the conventions used by this 
tutorial to leave some variables undefined on purpose).

Happy debugging.

=head1 AUTHOR

Kennedy Clark, C<hkclark@gmail.com>

Please report any errors, issues or suggestions to the author.  The
most recent version of the Catalyst Tutorial can be found at
L<http://dev.catalyst.perl.org/repos/Catalyst/Catalyst-Manual/5.80/trunk/lib/Catalyst/Manual/Tutorial/>.

Copyright 2006-2008, Kennedy Clark, under Creative Commons License
(L<http://creativecommons.org/licenses/by-sa/3.0/us/>).