From: Karl Williamson Date: Sun, 28 Mar 2010 04:45:53 +0000 (-0600) Subject: Bring up to date for 5.12; including POSIX X-Git-Url: http://git.shadowcat.co.uk/gitweb/gitweb.cgi?a=commitdiff_plain;h=ea4495057aaed60cdb8c514940b386ea41efc090;p=p5sagit%2Fp5-mst-13.2.git Bring up to date for 5.12; including POSIX The regex documentation included changes that were put temporarily into a 5.11 release, but not into 5.12. And there were a number of omissions. I went through this pod and tried to make it reflect reality. --- diff --git a/pod/perlrecharclass.pod b/pod/perlrecharclass.pod index 140d8ea..1846fca 100644 --- a/pod/perlrecharclass.pod +++ b/pod/perlrecharclass.pod @@ -1,4 +1,5 @@ =head1 NAME +X perlrecharclass - Perl Regular Expression Character Classes @@ -17,7 +18,9 @@ consumes exactly one character in the source string. (The source string is the string the regular expression is matched against.) There are three types of character classes in Perl regular -expressions: the dot, backslashed sequences, and the bracketed form. +expressions: the dot, backslashed sequences, and the form enclosed in square +brackets. Keep in mind, though, that often the term "character class" is used +to mean just the bracketed form. This is true in other Perl documentation. =head2 The dot @@ -39,6 +42,9 @@ Here are some examples: "ab" =~ /^.$/ # No match (dot matches one character) =head2 Backslashed sequences +X<\w> X<\W> X<\s> X<\S> X<\d> X<\D> X<\p> X<\P> +X<\N> X<\v> X<\V> X<\h> X<\H> +X X Perl regular expressions contain many backslashed sequences that constitute a character class. That is, they will match a single @@ -47,112 +53,121 @@ character, if that character belongs to a specific set of characters characters starting with a backslash. Not all backslashed sequences are character classes; for a full list, see L. -Here's a list of the backslashed sequences, which are discussed in -more detail below. +Here's a list of the backslashed sequences that are character classes. They +are discussed in more detail below. \d Match a digit character. \D Match a non-digit character. \w Match a "word" character. \W Match a non-"word" character. - \s Match a white space character. - \S Match a non-white space character. - \h Match a horizontal white space character. - \H Match a character that isn't horizontal white space. + \s Match a whitespace character. + \S Match a non-whitespace character. + \h Match a horizontal whitespace character. + \H Match a character that isn't horizontal whitespace. \N Match a character that isn't newline. Experimental. - \v Match a vertical white space character. - \V Match a character that isn't vertical white space. + \v Match a vertical whitespace character. + \V Match a character that isn't vertical whitespace. \pP, \p{Prop} Match a character matching a Unicode property. \PP, \P{Prop} Match a character that doesn't match a Unicode property. =head3 Digits -C<\d> matches a single character that is considered to be a I. -What is considered a digit depends on the internal encoding of -the source string. If the source string is in UTF-8 format, C<\d> -not only matches the digits '0' - '9', but also Arabic, Devanagari and -digits from other languages. Otherwise, if there is a locale in effect, -it will match whatever characters the locale considers digits. Without -a locale, C<\d> matches the digits '0' to '9'. -See L. +C<\d> matches a single character that is considered to be a I. What is +considered a digit depends on the internal encoding of the source string and +the locale that is in effect. If the source string is in UTF-8 format, C<\d> +not only matches the digits '0' - '9', but also Arabic, Devanagari and digits +from other languages. Otherwise, if there is a locale in effect, it will match +whatever characters the locale considers digits. Without a locale, C<\d> +matches the digits '0' to '9'. See L. Any character that isn't matched by C<\d> will be matched by C<\D>. =head3 Word characters -C<\w> matches a single I character: an alphanumeric character -(that is, an alphabetic character, or a digit), or the underscore (C<_>). -What is considered a word character depends on the internal encoding -of the string. If it's in UTF-8 format, C<\w> matches those characters -that are considered word characters in the Unicode database. That is, it -not only matches ASCII letters, but also Thai letters, Greek letters, etc. -If the source string isn't in UTF-8 format, C<\w> matches those characters -that are considered word characters by the current locale. Without -a locale in effect, C<\w> matches the ASCII letters, digits and the -underscore. +A C<\w> matches a single alphanumeric character (an alphabetic character, or a +decimal digit) or an underscore (C<_>), not a whole word. Use C<\w+> to match +a string of Perl-identifier characters (which isn't the same as matching an +English word). What is considered a word character depends on the internal +encoding of the string and the locale or EBCDIC code page that is in effect. If +it's in UTF-8 format, C<\w> matches those characters that are considered word +characters in the Unicode database. That is, it not only matches ASCII letters, +but also Thai letters, Greek letters, etc. If the source string isn't in UTF-8 +format, C<\w> matches those characters that are considered word characters by +the current locale or EBCDIC code page. Without a locale or EBCDIC code page, +C<\w> matches the ASCII letters, digits and the underscore. +See L. Any character that isn't matched by C<\w> will be matched by C<\W>. -=head3 White space - -C<\s> matches any single character that is considered white space. In the -ASCII range, C<\s> matches the horizontal tab (C<\t>), the new line -(C<\n>), the form feed (C<\f>), the carriage return (C<\r>), and the -space (the vertical tab, C<\cK> is not matched by C<\s>). The exact set -of characters matched by C<\s> depends on whether the source string is -in UTF-8 format. If it is, C<\s> matches what is considered white space -in the Unicode database. Otherwise, if there is a locale in effect, C<\s> -matches whatever is considered white space by the current locale. Without -a locale, C<\s> matches the five characters mentioned in the beginning -of this paragraph. Perhaps the most notable difference is that C<\s> -matches a non-breaking space only if the non-breaking space is in a -UTF-8 encoded string. +=head3 Whitespace + +C<\s> matches any single character that is considered whitespace. In the ASCII +range, C<\s> matches the horizontal tab (C<\t>), the new line (C<\n>), the form +feed (C<\f>), the carriage return (C<\r>), and the space. (The vertical tab, +C<\cK> is not matched by C<\s>.) The exact set of characters matched by C<\s> +depends on whether the source string is in UTF-8 format and the locale or +EBCDIC code page that is in effect. If it's in UTF-8 format, C<\s> matches what +is considered whitespace in the Unicode database; the complete list is in the +table below. Otherwise, if there is a locale or EBCDIC code page in effect, +C<\s> matches whatever is considered whitespace by the current locale or EBCDIC +code page. Without a locale or EBCDIC code page, C<\s> matches the five +characters mentioned in the beginning of this paragraph. Perhaps the most +notable possible surprise is that C<\s> matches a non-breaking space only if +the non-breaking space is in a UTF-8 encoded string or the locale or EBCDIC +code page that is in effect has that character. +See L. Any character that isn't matched by C<\s> will be matched by C<\S>. -C<\h> will match any character that is considered horizontal white space; -this includes the space and the tab characters. C<\H> will match any character -that is not considered horizontal white space. - -C<\N> is an experimental feature. It, like the dot, will match any character -that is not a newline. The difference is that C<\N> will not be influenced by -the single line C regular expression modifier. (Note that, since C<\N{}> is -also used for named characters, if C<\N> is followed by an opening brace and -something that is not a quantifier, perl will assume that a character name is -coming. For example, C<\N{3}> means to match 3 non-newlines; C<\N{5,}> means -to match 5 or more non-newlines, but C<\N{4F}> is not a legal quantifier, and -will cause perl to look for a character named C<4F> (and won't find one unless -custom names have been defined that include it.) - -C<\v> will match any character that is considered vertical white space; -this includes the carriage return and line feed characters (newline). -C<\V> will match any character that is not considered vertical white space. +C<\h> will match any character that is considered horizontal whitespace; +this includes the space and the tab characters and 17 other characters that are +listed in the table below. C<\H> will match any character +that is not considered horizontal whitespace. + +C<\N> is new in 5.12, and is experimental. It, like the dot, will match any +character that is not a newline. The difference is that C<\N> will not be +influenced by the single line C regular expression modifier. (Note that, +there is a second meaning of C<\N> when of the form C<\N{...}>. This form is +for named characters. See L for those. If C<\N> is followed by an +opening brace and something that is not a quantifier, perl will assume that a +character name is coming, and not this meaning of C<\N>. For example, C<\N{3}> +means to match 3 non-newlines; C<\N{5,}> means to match 5 or more non-newlines, +but C<\N{4F}> and C<\N{F4}> are not legal quantifiers, and will cause perl to +look for characters named C<4F> or C, respectively (and won't find them, +thus raising an error, unless they have been defined using custom names). + +C<\v> will match any character that is considered vertical whitespace; +this includes the carriage return and line feed characters (newline) plus 5 +other characters listed in the table below. +C<\V> will match any character that is not considered vertical whitespace. C<\R> matches anything that can be considered a newline under Unicode rules. It's not a character class, as it can match a multi-character sequence. Therefore, it cannot be used inside a bracketed character -class. Details are discussed in L. - -C<\h>, C<\H>, C<\v>, C<\V>, and C<\R> are new in perl 5.10.0. +class; use C<\v> instead (vertical whitespace). +Details are discussed in L. Note that unlike C<\s>, C<\d> and C<\w>, C<\h> and C<\v> always match the same characters, regardless whether the source string is in UTF-8 format or not. The set of characters they match is also not influenced -by locale. +by locale or EBCDIC code page. -One might think that C<\s> is equivalent with C<[\h\v]>. This is not true. -The vertical tab (C<"\x0b">) is not matched by C<\s>, it is however -considered vertical white space. Furthermore, if the source string is -not in UTF-8 format, the next line (C<"\x85">) and the no-break space -(C<"\xA0">) are not matched by C<\s>, but are by C<\v> and C<\h> respectively. -If the source string is in UTF-8 format, both the next line and the -no-break space are matched by C<\s>. +One might think that C<\s> is equivalent to C<[\h\v]>. This is not true. The +vertical tab (C<"\x0b">) is not matched by C<\s>, it is however considered +vertical whitespace. Furthermore, if the source string is not in UTF-8 format, +and any locale or EBCDIC code page that is in effect doesn't include them, the +next line (C<"\x85">) and the no-break space (C<"\xA0">) characters are not +matched by C<\s>, but are by C<\v> and C<\h> respectively. If the source +string is in UTF-8 format, both the next line and the no-break space are +matched by C<\s>. The following table is a complete listing of characters matched by -C<\s>, C<\h> and C<\v>. +C<\s>, C<\h> and C<\v> as of Unicode 5.2. The first column gives the code point of the character (in hex format), the second column gives the (Unicode) name. The third column indicates -by which class(es) the character is matched. +by which class(es) the character is matched (assuming no locale or EBCDIC code +page is in effect that changes the C<\s> matching). 0x00009 CHARACTER TABULATION h s 0x0000a LINE FEED (LF) vs @@ -186,7 +201,7 @@ by which class(es) the character is matched. =item [1] NEXT LINE and NO-BREAK SPACE only match C<\s> if the source string is in -UTF-8 format. +UTF-8 format, or the locale or EBCDIC code page that is in effect includes them. =back @@ -202,7 +217,7 @@ fit given Unicode classes. One letter classes can be used in the C<\pP> form, with the class name following the C<\p>, otherwise, braces are required. There is a single form, which is just the property name enclosed in the braces, and a compound form which looks like C<\p{name=value}>, which means to match -if the property C for the character has the particular C. +if the property "name" for the character has the particular "value". For instance, a match for a number can be written as C or as C, or as C. Lowercase letters are matched by the property I which @@ -226,14 +241,14 @@ L. "7" =~ /\w/ # Match, "7" is a 'word' character as well. "a" =~ /\d/ # No match, "a" isn't a digit. "7" =~ /\d/ # Match, "7" is a digit. - " " =~ /\s/ # Match, a space is white space. + " " =~ /\s/ # Match, a space is whitespace. "a" =~ /\D/ # Match, "a" is a non-digit. "7" =~ /\D/ # No match, "7" is not a non-digit. - " " =~ /\S/ # No match, a space is not non-white space. + " " =~ /\S/ # No match, a space is not non-whitespace. - " " =~ /\h/ # Match, space is horizontal white space. - " " =~ /\v/ # No match, space is not vertical white space. - "\r" =~ /\v/ # Match, a return is vertical white space. + " " =~ /\h/ # Match, space is horizontal whitespace. + " " =~ /\v/ # No match, space is not vertical whitespace. + "\r" =~ /\v/ # Match, a return is vertical whitespace. "a" =~ /\pL/ # Match, "a" is a letter. "a" =~ /\p{Lu}/ # No match, /\p{Lu}/ matches upper case letters. @@ -241,7 +256,7 @@ L. "\x{0e0b}" =~ /\p{Thai}/ # Match, \x{0e0b} is the character # 'THAI CHARACTER SO SO', and that's in # Thai Unicode class. - "a" =~ /\P{Lao}/ # Match, as "a" is not a Laoian character. + "a" =~ /\P{Lao}/ # Match, as "a" is not a Laotian character. =head2 Bracketed Character Classes @@ -249,9 +264,9 @@ L. The third form of character class you can use in Perl regular expressions is the bracketed form. In its simplest form, it lists the characters that may be matched inside square brackets, like this: C<[aeiou]>. -This matches one of C, C, C, C or C. Just as the other +This matches one of C, C, C, C or C. Like the other character classes, exactly one character will be matched. To match -a longer string consisting of characters mentioned in the characters +a longer string consisting of characters mentioned in the character class, follow the character class with a quantifier. For instance, C<[aeiou]+> matches a string of one or more lowercase ASCII vowels. @@ -301,7 +316,8 @@ C<\x> are also special and have the same meanings as they do outside a bracketed character class. -Also, a backslash followed by digits is considered an octal number. +Also, a backslash followed by two or three octal digits is considered an octal +number. A C<[> is not special inside a character class, unless it's the start of a POSIX character class (see below). It normally does not need escaping. @@ -342,13 +358,13 @@ most people will not know which characters that will be. Furthermore, such ranges may lead to portability problems if the code has to run on a platform that uses a different character set, such as EBCDIC. -If a hyphen in a character class cannot be part of a range, for instance -because it is the first or the last character of the character class, +If a hyphen in a character class cannot syntactically be part of a range, for +instance because it is the first or the last character of the character class, or if it immediately follows a range, the hyphen isn't special, and will be -considered a character that may be matched. You have to escape the hyphen -with a backslash if you want to have a hyphen in your set of characters to -be matched, and its position in the class is such that it can be considered -part of a range. +considered a character that may be matched. You have to escape the hyphen with +a backslash if you want to have a hyphen in your set of characters to be +matched, and its position in the class is such that it could be considered part +of a range. Examples: @@ -383,8 +399,8 @@ Examples: =head3 Backslash Sequences -You can put any backslash sequence character class (with one exception listed -in the next paragraph) inside a bracketed character class, and it will act just +You can put any backslash sequence character class (with the exception of +C<\N>) inside a bracketed character class, and it will act just as if you put all the characters matched by the backslash sequence inside the character class. For instance, C<[a-f\d]> will match any digit, or any of the lowercase letters between 'a' and 'f' inclusive. @@ -405,9 +421,13 @@ Backslash sequence character classes cannot form one of the endpoints of a range. =head3 Posix Character Classes +X X<\p> X<\p{}> +fix +X X X X X X X +X X X X X X X Posix character classes have the form C<[:class:]>, where I is -name, and the C<[:> and C<:]> delimiters. Posix character classes appear +name, and the C<[:> and C<:]> delimiters. Posix character classes only appear I bracketed character classes, and are a convenient and descriptive way of listing a group of characters. Be careful about the syntax, @@ -419,96 +439,156 @@ way of listing a group of characters. Be careful about the syntax, The latter pattern would be a character class consisting of a colon, and the letters C, C, C

and C. +These character classes can be part of a larger bracketed character class. For +example, + + [01[:alpha:]%] + +is valid and matches '0', '1', any alphabetic character, and the percent sign. Perl recognizes the following POSIX character classes: - alpha Any alphabetical character. - alnum Any alphanumerical character. - ascii Any ASCII character. + alpha Any alphabetical character ("[A-Za-z]"). + alnum Any alphanumerical character. ("[A-Za-z0-9]") + ascii Any character in the ASCII character set. blank A GNU extension, equal to a space or a horizontal tab ("\t"). - cntrl Any control character. - digit Any digit, equivalent to "\d". - graph Any printable character, excluding a space. - lower Any lowercase character. - print Any printable character, including a space. - punct Any punctuation character. - space Any white space character. "\s" plus the vertical tab ("\cK"). - upper Any uppercase character. - word Any "word" character, equivalent to "\w". - xdigit Any hexadecimal digit, '0' - '9', 'a' - 'f', 'A' - 'F'. - -The exact set of characters matched depends on whether the source string -is internally in UTF-8 format or not. See L. - -Most POSIX character classes have C<\p> counterparts. The difference -is that the C<\p> classes will always match according to the Unicode -properties, regardless whether the string is in UTF-8 format or not. - -The following table shows the relation between POSIX character classes -and the Unicode properties: - - [[:...:]] \p{...} backslash - - alpha IsAlpha - alnum IsAlnum - ascii IsASCII - blank - cntrl IsCntrl - digit IsDigit \d - graph IsGraph - lower IsLower - print IsPrint - punct IsPunct - space IsSpace - IsSpacePerl \s - upper IsUpper - word IsWord - xdigit IsXDigit - -Some of these names may not be obvious: + cntrl Any control character. See Note [2] below. + digit Any decimal digit ("[0-9]"), equivalent to "\d". + graph Any printable character, excluding a space. See Note [3] below. + lower Any lowercase character ("[a-z]"). + print Any printable character, including a space. See Note [4] below. + punct Any graphical character excluding "word" characters. See Note [5] + space Any whitespace character. "\s" plus the vertical tab ("\cK"). + upper Any uppercase character ("[A-Z]"). + word A Perl extension ("[A-Za-z0-9_]"), equivalent to "\w". + xdigit Any hexadecimal digit ("[0-9a-fA-F]"). + +Most POSIX character classes have two Unicode-style C<\p> property +counterparts. (They are not official Unicode properties, but Perl extensions +derived from official Unicode properties.) The table below shows the relation +between POSIX character classes and these counterparts. + +One counterpart, in the column labelled "ASCII-range Unicode" in +the table will only match characters in the ASCII range. (On EBCDIC platforms, +they match those characters which have ASCII equivalents.) + +The other counterpart, in the column labelled "Full-range Unicode", matches any +appropriate characters in the full Unicode character set. For example, +C<\p{Alpha}> will match not just the ASCII alphabetic characters, but any +character in the entire Unicode character set that is considered to be +alphabetic. + +(Each of the counterparts has various synonyms as well. +L lists all the +synonyms, plus all the characters matched by each of the ASCII-range +properties. For example C<\p{AHex}> is a synonym for C<\p{ASCII_Hex_Digit}>, +and any C<\p> property name can be prefixed with "Is" such as C<\p{IsAlpha}>.) + +Both the C<\p> forms are unaffected by any locale that is in effect, or whether +the string is in UTF-8 format or not, or whether the platform is EBCDIC or not. +In contrast, the POSIX character classes are affected. If the source string is +in UTF-8 format, the POSIX classes (with the exception of C<[[:punct:]]>, see +Note [5]) behave like their "Full-range" Unicode counterparts. If the source +string is not in UTF-8 format, and no locale is in effect, and the platform is +not EBCDIC, all the POSIX classes behave like their ASCII-range counterparts. +Otherwise, they behave based on the rules of the locale or EBCDIC code page. +It is proposed to change this behavior in a future release of Perl so that the +the UTF8ness of the source string will be irrelevant to the behavior of the +POSIX character classes. This means they will always behave in strict +accordance with the official POSIX standard. That is, if either locale or +EBCDIC code page is present, they will behave in accordance with those; if +absent, the classes will match only their ASCII-range counterparts. If you +disagree with this proposal, send email to C. + + [[:...:]] ASCII-range Full-range backslash Note + Unicode Unicode sequence + ----------------------------------------------------- + alpha \p{PosixAlpha} \p{Alpha} + alnum \p{PosixAlnum} \p{Alnum} + ascii \p{ASCII} + blank \p{PosixBlank} \p{Blank} = + \p{HorizSpace} \h [1] + cntrl \p{PosixCntrl} \p{Cntrl} [2] + digit \p{PosixDigit} \p{Digit} \d + graph \p{PosixGraph} \p{Graph} [3] + lower \p{PosixLower} \p{Lower} + print \p{PosixPrint} \p{Print} [4] + punct \p{PosixPunct} \p{Punct} [5] + \p{PerlSpace} \p{SpacePerl} \s [6] + space \p{PosixSpace} \p{Space} [6] + upper \p{PosixUpper} \p{Upper} + word \p{PerlWord} \p{Word} \w + xdigit \p{ASCII_Hex_Digit} \p{XDigit} =over 4 -=item cntrl +=item [1] + +C<\p{Blank}> and C<\p{HorizSpace}> are synonyms. + +=item [2] -Any control character. Usually, control characters don't produce output -as such, but instead control the terminal somehow: for example newline -and backspace are control characters. All characters with C less -than 32 are usually classified as control characters (in ASCII, the ISO -Latin character sets, and Unicode), as is the character C value -of 127 (C). +Control characters don't produce output as such, but instead usually control +the terminal somehow: for example newline and backspace are control characters. +In the ASCII range, characters whose ordinals are between 0 and 31 inclusive, +plus 127 (C) are control characters. -=item graph +On EBCDIC platforms, it is likely that the code page will define this character +class to be the counterparts to the ASCII controls, plus the controls that in +Unicode have ordinals from 128 through 139. + +=item [3] Any character that is I, that is, visible. This class consists of all the alphanumerical characters and all punctuation characters. -=item print +=item [4] All printable characters, which is the set of all the graphical characters -plus the space. +plus whitespace characters that are not also controls. + +=item [5] + +C<\p{PosixPunct}> and C<[[:punct:]]> in the ASCII range match all the +non-controls, non-alphanumeric, non-space characters: +C<[-!"#$%&'()*+,./:;<=E?@[\\\]^_`{|}~]> (although if a locale is in effect, +it could alter the behavior of C<[[:punct:]]>). + +When the matching string is in UTF-8 format, C<[[:punct:]]> matches the above +set, plus whatever C<\p{Punct}> matches beyond the ASCII range. It matches +more than what C<\p{Punct}> matches in the ASCII range, because the POSIX +definition of "Punct" includes more than what Unicode calls "Punct"; namely, it +includes what Unicode calls "Symbol". In other words, the Posix C<[[:punct:]]> +lumps the Unicode "Punct" and "Symbol" together. + +This character class does not match any characters of Unicode type "Symbol" +outside the ASCII range when the matching string is in UTF-8 format. -=item punct +=item [6] -Any punctuation (special) character. +C<\p{SpacePerl}> and C<\p{Space}> differ only in that C<\p{Space}> additionally +matches the vertical tab, C<\cK>. Same for the two ASCII-only range forms. =back =head4 Negation +X A Perl extension to the POSIX character class is the ability to negate it. This is done by prefixing the class name with a caret (C<^>). Some examples: - POSIX Unicode Backslash - [[:^digit:]] \P{IsDigit} \D - [[:^space:]] \P{IsSpace} \S - [[:^word:]] \P{IsWord} \W + POSIX ASCII-range Full-range backslash + Unicode Unicode sequence + ----------------------------------------------------- + [[:^digit:]] \P{PosixDigit} \P{Digit} \D + [[:^space:]] \P{PosixSpace} \P{Space} + [[:^word:]] \P{PerlWord} \P{Word} \W =head4 [= =] and [. .] Perl will recognize the POSIX character classes C<[=class=]>, and -C<[.class.]>, but does not (yet?) support this construct. Use of +C<[.class.]>, but does not (yet?) support them. Use of such a construct will lead to an error. @@ -526,27 +606,30 @@ such a construct will lead to an error. # and 'A' to 'F'. -=head2 Locale, Unicode and UTF-8 +=head2 Locale, EBCDIC, Unicode and UTF-8 Some of the character classes have a somewhat different behaviour depending on the internal encoding of the source string, and the locale that is -in effect. +in effect, and if the program is running on an EBCDIC platform. C<\w>, C<\d>, C<\s> and the POSIX character classes (and their negations, -including C<\W>, C<\D>, C<\S>) suffer from this behaviour. +including C<\W>, C<\D>, C<\S>) suffer from this behaviour. (This also affects +the backslash sequences C<\b> and C<\B>.) The rule is that if the source string is in UTF-8 format, the character classes match according to the Unicode properties. If the source string -isn't, then the character classes match according to whatever locale is -in effect. If there is no locale, they match the ASCII defaults -(52 letters, 10 digits and underscore for C<\w>, 0 to 9 for C<\d>, etc). +isn't, then the character classes match according to whatever locale or EBCDIC +code page is in effect. If there is no locale nor EBCDIC, they match the ASCII +defaults (52 letters, 10 digits and underscore for C<\w>; 0 to 9 for C<\d>; +L above gives the list for C<\s>). This usually means that if you are matching against characters whose C values are between 128 and 255 inclusive, your character class may match -or not depending on the current locale, and whether the source string is -in UTF-8 format. The string will be in UTF-8 format if it contains -characters whose C value exceeds 255. But a string may be in UTF-8 -format without it having such characters. +or not depending on the current locale or EBCDIC code page, and whether the +source string is in UTF-8 format. The string will be in UTF-8 format if it +contains characters whose C value exceeds 255. But a string may be in +UTF-8 format without it having such characters. See L. For portability reasons, it may be better to not use C<\w>, C<\d>, C<\s> or the POSIX character classes, and use the Unicode properties instead.