From: Jarkko Hietaniemi Date: Thu, 26 Oct 2000 13:05:52 +0000 (+0000) Subject: Undo #7451, this seems to be a deficiency in Perforce, X-Git-Url: http://git.shadowcat.co.uk/gitweb/gitweb.cgi?a=commitdiff_plain;h=a92267804e0e930494190e074961851f09af0926;p=p5sagit%2Fp5-mst-13.2.git Undo #7451, this seems to be a deficiency in Perforce, there is no per-file line-terminator type, only per-client. p4raw-id: //depot/perl@7452 --- diff --git a/README.dos b/README.dos index 8d42f65..51cd1d6 100644 --- a/README.dos +++ b/README.dos @@ -1,215 +1,215 @@ -If you read this file _as_is_, just ignore the funny characters you -see. It is written in the POD format (see perlpod manpage) which is -specially designed to be readable as is. - -=head1 NAME - -perldos - Perl under DOS, W31, W95. - -=head1 SYNOPSIS - -These are instructions for building Perl under DOS (or w??), using -DJGPP v2.01 or later. Under w95 long filenames are supported. - -=head1 DESCRIPTION - -Before you start, you should glance through the README file -found in the top-level directory where the Perl distribution -was extracted. Make sure you read and understand the terms under -which this software is being distributed. - -This port currently supports MakeMaker (the set of modules that -is used to build extensions to perl). Therefore, you should be -able to build and install most extensions found in the CPAN sites. - -=head2 Prerequisites - -=over 4 - -=item DJGPP - -DJGPP is a port of GNU C/C++ compiler and development tools to 32-bit, -protected-mode environment on Intel 32-bit CPUs running MS-DOS and compatible -operating systems, by DJ Delorie and friends. - -For more details (FAQ), check out the home of DJGPP at: - - http://www.delorie.com/djgpp/ - -If you have questions about DJGPP, try posting to the DJGPP newsgroup: -comp.os.msdos.djgpp, or use the email gateway djgpp@delorie.com. - -You can find the full DJGPP distribution on any SimTel.Net mirror all over -the world. Like: - - ftp://ftp.simtel.net/pub/simtelnet/gnu/djgpp/v2* - -You need the following files to build perl (or add new modules): - - v2/djdev202.zip - v2/bnu27b.zip - v2gnu/gcc2721b.zip - v2gnu/bsh1147b.zip - v2gnu/mak3761b.zip - v2gnu/fil316b.zip - v2gnu/sed118b.zip - v2gnu/txt122b.zip - v2gnu/dif271b.zip - v2gnu/grep21b.zip - v2gnu/shl112b.zip - v2gnu/gawk303b.zip - v2misc/csdpmi4b.zip - -or possibly any newer version. - -=item Pthreads - -Thread support is not tested in this version of the djgpp perl. - -=back - -=head2 Shortcomings of Perl under DOS - -Perl under DOS lacks some features of perl under UNIX because of -deficiencies in the UNIX-emulation, most notably: - -=over 4 - -=item * - -fork() and pipe() - -=item * - -some features of the UNIX filesystem regarding link count and file dates - -=item * - -in-place operation is a little bit broken with short filenames - -=item * - -sockets - -=back - -=head2 Building - -=over 4 - -=item * - -Unpack the source package F with djtarx. If you want -to use long file names under w95 and also to get Perl to pass all its -tests, don't forget to use - - set LFN=y - set FNCASE=y - -before unpacking the archive. - -=item * - -Create a "symlink" or copy your bash.exe to sh.exe in your C<($DJDIR)/bin> -directory. - - ln -s bash.exe sh.exe - -And make the C environment variable point to this F: - - set SHELL=c:/djgpp/bin/sh.exe (use full path name!) - -You can do this in F too. Add this line BEFORE any section -definition: - - +SHELL=%DJDIR%/bin/sh.exe - -=item * - -If you have F and F in your path, then rename -F to F, and F to F. -Copy or link F to F if you don't have F. -Copy or link F to F if you don't have F. - -=item * - -Chdir to the djgpp subdirectory of perl toplevel and type the following -command: - - configure.bat - -This will do some preprocessing then run the Configure script for you. -The Configure script is interactive, but in most cases you -just need to press ENTER. - -If the script says that your package is incomplete, and asks whether -to continue, just answer with Y (this can only happen if you don't use -long filenames). - -When Configure asks about the extensions, I suggest IO and Fcntl, -and if you want database handling then SDBM_File or GDBM_File -(you need to install gdbm for this one). If you want to use the -POSIX extension (this is the default), make sure that the stack -size of your F is at least 512kbyte (you can check this -with: C). - -You can use the Configure script in non-interactive mode too. -When I built my F, I used something like this: - - configure.bat -des - -You can find more info about Configure's command line switches in -the F file. - -When the script ends, and you want to change some values in the -generated F file, then run - - sh Configure -S - -after you made your modifications. - -IMPORTANT: if you use this C<-S> switch, be sure to delete the CONFIG -environment variable before running the script: - - set CONFIG= - -=item * - -Now you can compile Perl. Type: - - make - -=back - -=head2 Testing - -Type: - - make test - -If you're lucky you should see "All tests successful". But there can be -a few failed subtests (less than 5 hopefully) depending on some external -conditions (e.g. some subtests fail under linux/dosemu or plain dos -with short filenames only). - -=head2 Installation - -Type: - - make install - -This will copy the newly compiled perl and libraries into your DJGPP -directory structure. Perl.exe and the utilities go into C<($DJDIR)/bin>, -and the library goes under C<($DJDIR)/lib/perl5>. The pod documentation -goes under C<($DJDIR)/lib/perl5/pod>. - -=head1 AUTHOR - -Laszlo Molnar, F - -=head1 SEE ALSO - -perl(1). - -=cut - +If you read this file _as_is_, just ignore the funny characters you +see. It is written in the POD format (see perlpod manpage) which is +specially designed to be readable as is. + +=head1 NAME + +perldos - Perl under DOS, W31, W95. + +=head1 SYNOPSIS + +These are instructions for building Perl under DOS (or w??), using +DJGPP v2.01 or later. Under w95 long filenames are supported. + +=head1 DESCRIPTION + +Before you start, you should glance through the README file +found in the top-level directory where the Perl distribution +was extracted. Make sure you read and understand the terms under +which this software is being distributed. + +This port currently supports MakeMaker (the set of modules that +is used to build extensions to perl). Therefore, you should be +able to build and install most extensions found in the CPAN sites. + +=head2 Prerequisites + +=over 4 + +=item DJGPP + +DJGPP is a port of GNU C/C++ compiler and development tools to 32-bit, +protected-mode environment on Intel 32-bit CPUs running MS-DOS and compatible +operating systems, by DJ Delorie and friends. + +For more details (FAQ), check out the home of DJGPP at: + + http://www.delorie.com/djgpp/ + +If you have questions about DJGPP, try posting to the DJGPP newsgroup: +comp.os.msdos.djgpp, or use the email gateway djgpp@delorie.com. + +You can find the full DJGPP distribution on any SimTel.Net mirror all over +the world. Like: + + ftp://ftp.simtel.net/pub/simtelnet/gnu/djgpp/v2* + +You need the following files to build perl (or add new modules): + + v2/djdev202.zip + v2/bnu27b.zip + v2gnu/gcc2721b.zip + v2gnu/bsh1147b.zip + v2gnu/mak3761b.zip + v2gnu/fil316b.zip + v2gnu/sed118b.zip + v2gnu/txt122b.zip + v2gnu/dif271b.zip + v2gnu/grep21b.zip + v2gnu/shl112b.zip + v2gnu/gawk303b.zip + v2misc/csdpmi4b.zip + +or possibly any newer version. + +=item Pthreads + +Thread support is not tested in this version of the djgpp perl. + +=back + +=head2 Shortcomings of Perl under DOS + +Perl under DOS lacks some features of perl under UNIX because of +deficiencies in the UNIX-emulation, most notably: + +=over 4 + +=item * + +fork() and pipe() + +=item * + +some features of the UNIX filesystem regarding link count and file dates + +=item * + +in-place operation is a little bit broken with short filenames + +=item * + +sockets + +=back + +=head2 Building + +=over 4 + +=item * + +Unpack the source package F with djtarx. If you want +to use long file names under w95 and also to get Perl to pass all its +tests, don't forget to use + + set LFN=y + set FNCASE=y + +before unpacking the archive. + +=item * + +Create a "symlink" or copy your bash.exe to sh.exe in your C<($DJDIR)/bin> +directory. + + ln -s bash.exe sh.exe + +And make the C environment variable point to this F: + + set SHELL=c:/djgpp/bin/sh.exe (use full path name!) + +You can do this in F too. Add this line BEFORE any section +definition: + + +SHELL=%DJDIR%/bin/sh.exe + +=item * + +If you have F and F in your path, then rename +F to F, and F to F. +Copy or link F to F if you don't have F. +Copy or link F to F if you don't have F. + +=item * + +Chdir to the djgpp subdirectory of perl toplevel and type the following +command: + + configure.bat + +This will do some preprocessing then run the Configure script for you. +The Configure script is interactive, but in most cases you +just need to press ENTER. + +If the script says that your package is incomplete, and asks whether +to continue, just answer with Y (this can only happen if you don't use +long filenames). + +When Configure asks about the extensions, I suggest IO and Fcntl, +and if you want database handling then SDBM_File or GDBM_File +(you need to install gdbm for this one). If you want to use the +POSIX extension (this is the default), make sure that the stack +size of your F is at least 512kbyte (you can check this +with: C). + +You can use the Configure script in non-interactive mode too. +When I built my F, I used something like this: + + configure.bat -des + +You can find more info about Configure's command line switches in +the F file. + +When the script ends, and you want to change some values in the +generated F file, then run + + sh Configure -S + +after you made your modifications. + +IMPORTANT: if you use this C<-S> switch, be sure to delete the CONFIG +environment variable before running the script: + + set CONFIG= + +=item * + +Now you can compile Perl. Type: + + make + +=back + +=head2 Testing + +Type: + + make test + +If you're lucky you should see "All tests successful". But there can be +a few failed subtests (less than 5 hopefully) depending on some external +conditions (e.g. some subtests fail under linux/dosemu or plain dos +with short filenames only). + +=head2 Installation + +Type: + + make install + +This will copy the newly compiled perl and libraries into your DJGPP +directory structure. Perl.exe and the utilities go into C<($DJDIR)/bin>, +and the library goes under C<($DJDIR)/lib/perl5>. The pod documentation +goes under C<($DJDIR)/lib/perl5/pod>. + +=head1 AUTHOR + +Laszlo Molnar, F + +=head1 SEE ALSO + +perl(1). + +=cut + diff --git a/README.win32 b/README.win32 index a0d7a0b..8e29acc 100644 --- a/README.win32 +++ b/README.win32 @@ -1,656 +1,656 @@ -If you read this file _as_is_, just ignore the funny characters you -see. It is written in the POD format (see pod/perlpod.pod) which is -specially designed to be readable as is. - -=head1 NAME - -perlwin32 - Perl under Win32 - -=head1 SYNOPSIS - -These are instructions for building Perl under Windows (9x, NT and -2000). - -=head1 DESCRIPTION - -Before you start, you should glance through the README file -found in the top-level directory where the Perl distribution -was extracted. Make sure you read and understand the terms under -which this software is being distributed. - -Also make sure you read L below for the -known limitations of this port. - -The INSTALL file in the perl top-level has much information that is -only relevant to people building Perl on Unix-like systems. In -particular, you can safely ignore any information that talks about -"Configure". - -You may also want to look at two other options for building -a perl that will work on Windows NT: the README.cygwin and -README.os2 files, which each give a different set of rules to build -a Perl that will work on Win32 platforms. Those two methods will -probably enable you to build a more Unix-compatible perl, but you -will also need to download and use various other build-time and -run-time support software described in those files. - -This set of instructions is meant to describe a so-called "native" -port of Perl to Win32 platforms. The resulting Perl requires no -additional software to run (other than what came with your operating -system). Currently, this port is capable of using one of the -following compilers: - - Borland C++ version 5.02 or later - Microsoft Visual C++ version 4.2 or later - Mingw32 with GCC version 2.95.2 or better - -The last of these is a high quality freeware compiler. Support -for it is still experimental. (Older versions of GCC are known -not to work.) - -This port currently supports MakeMaker (the set of modules that -is used to build extensions to perl). Therefore, you should be -able to build and install most extensions found in the CPAN sites. -See L below for general hints about this. - -=head2 Setting Up - -=over 4 - -=item Make - -You need a "make" program to build the sources. If you are using -Visual C++ under Windows NT or 2000, nmake will work. All other -builds need dmake. - -dmake is a freely available make that has very nice macro features -and parallelability. - -A port of dmake for Windows is available from: - - http://www.cpan.org/authors/id/GSAR/dmake-4.1pl1-win32.zip - -(This is a fixed version of original dmake sources obtained from -http://www.wticorp.com/dmake/. As of version 4.1PL1, the original -sources did not build as shipped, and had various other problems. -A patch is included in the above fixed version.) - -Fetch and install dmake somewhere on your path (follow the instructions -in the README.NOW file). - -=item Command Shell - -Use the default "cmd" shell that comes with NT. Some versions of the -popular 4DOS/NT shell have incompatibilities that may cause you trouble. -If the build fails under that shell, try building again with the cmd -shell. - -The nmake Makefile also has known incompatibilities with the -"command.com" shell that comes with Windows 9x. You will need to -use dmake and makefile.mk to build under Windows 9x. - -The surest way to build it is on Windows NT, using the cmd shell. - -Make sure the path to the build directory does not contain spaces. The -build usually works in this circumstance, but some tests will fail. - -=item Borland C++ - -If you are using the Borland compiler, you will need dmake. -(The make that Borland supplies is seriously crippled, and will not -work for MakeMaker builds.) - -See L/"Make"> above. - -=item Microsoft Visual C++ - -The nmake that comes with Visual C++ will suffice for building. -You will need to run the VCVARS32.BAT file usually found somewhere -like C:\MSDEV4.2\BIN. This will set your build environment. - -You can also use dmake to build using Visual C++, provided: -you set OSRELEASE to "microsft" (or whatever the directory name -under which the Visual C dmake configuration lives) in your environment, -and edit win32/config.vc to change "make=nmake" into "make=dmake". The -latter step is only essential if you want to use dmake as your default -make for building extensions using MakeMaker. - -=item Mingw32 with GCC - -GCC-2.95.2 binaries can be downloaded from: - - ftp://ftp.xraylith.wisc.edu/pub/khan/gnu-win32/mingw32/ - -The GCC-2.95.2 bundle comes with Mingw32 libraries and headers. - -Make sure you install the binaries that work with MSVCRT.DLL as indicated -in the README for the GCC bundle. You may need to set up a few environment -variables (usually run from a batch file). - -The version of gcc-2.95.2-msvcrt.exe released 7 November 1999 left out -a fix for certain command line quotes, so be sure to download and install -fixes/quote-fix-msvcrt.exe too. - -You also need dmake. See L above on how to get it. - -=back - -=head2 Building - -=over 4 - -=item * - -Make sure you are in the "win32" subdirectory under the perl toplevel. -This directory contains a "Makefile" that will work with -versions of nmake that come with Visual C++, and a dmake "makefile.mk" -that will work for all supported compilers. The defaults in the dmake -makefile are setup to build using the GCC compiler. - -=item * - -Edit the makefile.mk (or Makefile, if using nmake) and change the values -of INST_DRV and INST_TOP. You can also enable various build -flags. These are explained in the makefiles. - -You will have to make sure CCTYPE is set correctly, and CCHOME points -to wherever you installed your compiler. - -The default value for CCHOME in the makefiles for Visual C++ -may not be correct for some versions. Make sure the default exists -and is valid. - -If you have either the source or a library that contains des_fcrypt(), -enable the appropriate option in the makefile. des_fcrypt() is not -bundled with the distribution due to US Government restrictions -on the export of cryptographic software. Nevertheless, this routine -is part of the "libdes" library (written by Eric Young) which is widely -available worldwide, usually along with SSLeay (for example: -"ftp://fractal.mta.ca/pub/crypto/SSLeay/DES/"). Set CRYPT_SRC to the -name of the file that implements des_fcrypt(). Alternatively, if -you have built a library that contains des_fcrypt(), you can set -CRYPT_LIB to point to the library name. The location above contains -many versions of the "libdes" library, all with slightly different -implementations of des_fcrypt(). Older versions have a single, -self-contained file (fcrypt.c) that implements crypt(), so they may be -easier to use. A patch against the fcrypt.c found in libdes-3.06 is -in des_fcrypt.patch. - -Perl will also build without des_fcrypt(), but the crypt() builtin will -fail at run time. - -Be sure to read the instructions near the top of the makefiles carefully. - -=item * - -Type "dmake" (or "nmake" if you are using that make). - -This should build everything. Specifically, it will create perl.exe, -perl56.dll at the perl toplevel, and various other extension dll's -under the lib\auto directory. If the build fails for any reason, make -sure you have done the previous steps correctly. - -=back - -=head2 Testing - -Type "dmake test" (or "nmake test"). This will run most of the tests from -the testsuite (many tests will be skipped). - -There should be no test failures when running under Windows NT 4.0 or -Windows 2000. Many tests I fail under Windows 9x due to the inferior -command shell. - -Some test failures may occur if you use a command shell other than the -native "cmd.exe", or if you are building from a path that contains -spaces. So don't do that. - -If you are running the tests from a emacs shell window, you may see -failures in op/stat.t. Run "dmake test-notty" in that case. - -If you're using the Borland compiler, you may see a failure in op/taint.t -arising from the inability to find the Borland Runtime DLLs on the system -default path. You will need to copy the DLLs reported by the messages -from where Borland chose to install it, into the Windows system directory -(usually somewhere like C:\WINNT\SYSTEM32), and rerun the test. - -Please report any other failures as described under L. - -=head2 Installation - -Type "dmake install" (or "nmake install"). This will put the newly -built perl and the libraries under whatever C points to in the -Makefile. It will also install the pod documentation under -C<$INST_TOP\$VERSION\lib\pod> and HTML versions of the same under -C<$INST_TOP\$VERSION\lib\pod\html>. To use the Perl you just installed, -you will need to add two components to your PATH environment variable, -C<$INST_TOP\$VERSION\bin>, and C<$INST_TOP\$VERSION\bin\$ARCHNAME>. -For example: - - set PATH c:\perl\5.6.0\bin;c:\perl\5.6.0\bin\MSWin32-x86;%PATH% - -If you opt to comment out INST_VER and INST_ARCH in the makefiles, the -installation structure is much simpler. In that case, it will be -sufficient to add a single entry to the path, for instance: - - set PATH c:\perl\bin;%PATH% - -=head2 Usage Hints - -=over 4 - -=item Environment Variables - -The installation paths that you set during the build get compiled -into perl, so you don't have to do anything additional to start -using that perl (except add its location to your PATH variable). - -If you put extensions in unusual places, you can set PERL5LIB -to a list of paths separated by semicolons where you want perl -to look for libraries. Look for descriptions of other environment -variables you can set in L. - -You can also control the shell that perl uses to run system() and -backtick commands via PERL5SHELL. See L. - -Perl does not depend on the registry, but it can look up certain default -values if you choose to put them there. Perl attempts to read entries from -C and C. -Entries in the former override entries in the latter. One or more of the -following entries (of type REG_SZ or REG_EXPAND_SZ) may be set: - - lib-$] version-specific standard library path to add to @INC - lib standard library path to add to @INC - sitelib-$] version-specific site library path to add to @INC - sitelib site library path to add to @INC - vendorlib-$] version-specific vendor library path to add to @INC - vendorlib vendor library path to add to @INC - PERL* fallback for all %ENV lookups that begin with "PERL" - -Note the C<$]> in the above is not literal. Substitute whatever version -of perl you want to honor that entry, e.g. C<5.6.0>. Paths must be -separated with semicolons, as usual on win32. - -=item File Globbing - -By default, perl handles file globbing using the File::Glob extension, -which provides portable globbing. - -If you want perl to use globbing that emulates the quirks of DOS -filename conventions, you might want to consider using File::DosGlob -to override the internal glob() implementation. See L for -details. - -=item Using perl from the command line - -If you are accustomed to using perl from various command-line -shells found in UNIX environments, you will be less than pleased -with what Windows offers by way of a command shell. - -The crucial thing to understand about the Windows environment is that -the command line you type in is processed twice before Perl sees it. -First, your command shell (usually CMD.EXE on Windows NT, and -COMMAND.COM on Windows 9x) preprocesses the command line, to handle -redirection, environment variable expansion, and location of the -executable to run. Then, the perl executable splits the remaining -command line into individual arguments, using the C runtime library -upon which Perl was built. - -It is particularly important to note that neither the shell nor the C -runtime do any wildcard expansions of command-line arguments (so -wildcards need not be quoted). Also, the quoting behaviours of the -shell and the C runtime are rudimentary at best (and may, if you are -using a non-standard shell, be inconsistent). The only (useful) quote -character is the double quote ("). It can be used to protect spaces in -arguments and other special characters. The Windows NT documentation -has almost no description of how the quoting rules are implemented, but -here are some general observations based on experiments: The C runtime -breaks arguments at spaces and passes them to programs in argc/argv. -Doublequotes can be used to prevent arguments with spaces in them from -being split up. You can put a double quote in an argument by escaping -it with a backslash and enclosing the whole argument within double -quotes. The backslash and the pair of double quotes surrounding the -argument will be stripped by the C runtime. - -The file redirection characters "<", ">", and "|" can be quoted by -double quotes (although there are suggestions that this may not always -be true). Single quotes are not treated as quotes by the shell or the C -runtime. The caret "^" has also been observed to behave as a quoting -character, but this appears to be a shell feature, and the caret is not -stripped from the command line, so Perl still sees it (and the C runtime -phase does not treat the caret as a quote character). - -Here are some examples of usage of the "cmd" shell: - -This prints two doublequotes: - - perl -e "print '\"\"' " - -This does the same: - - perl -e "print \"\\\"\\\"\" " - -This prints "bar" and writes "foo" to the file "blurch": - - perl -e "print 'foo'; print STDERR 'bar'" > blurch - -This prints "foo" ("bar" disappears into nowhereland): - - perl -e "print 'foo'; print STDERR 'bar'" 2> nul - -This prints "bar" and writes "foo" into the file "blurch": - - perl -e "print 'foo'; print STDERR 'bar'" 1> blurch - -This pipes "foo" to the "less" pager and prints "bar" on the console: - - perl -e "print 'foo'; print STDERR 'bar'" | less - -This pipes "foo\nbar\n" to the less pager: - - perl -le "print 'foo'; print STDERR 'bar'" 2>&1 | less - -This pipes "foo" to the pager and writes "bar" in the file "blurch": - - perl -e "print 'foo'; print STDERR 'bar'" 2> blurch | less - - -Discovering the usefulness of the "command.com" shell on Windows 9x -is left as an exercise to the reader :) - -One particularly pernicious problem with the 4NT command shell for -Windows NT is that it (nearly) always treats a % character as indicating -that environment variable expansion is needed. Under this shell, it is -therefore important to always double any % characters which you want -Perl to see (for example, for hash variables), even when they are -quoted. - -=item Building Extensions - -The Comprehensive Perl Archive Network (CPAN) offers a wealth -of extensions, some of which require a C compiler to build. -Look in http://www.cpan.org/ for more information on CPAN. - -Note that not all of the extensions available from CPAN may work -in the Win32 environment; you should check the information at -http://testers.cpan.org/ before investing too much effort into -porting modules that don't readily build. - -Most extensions (whether they require a C compiler or not) can -be built, tested and installed with the standard mantra: - - perl Makefile.PL - $MAKE - $MAKE test - $MAKE install - -where $MAKE is whatever 'make' program you have configured perl to -use. Use "perl -V:make" to find out what this is. Some extensions -may not provide a testsuite (so "$MAKE test" may not do anything, or -fail), but most serious ones do. - -It is important that you use a supported 'make' program, and -ensure Config.pm knows about it. If you don't have nmake, you can -either get dmake from the location mentioned earlier, or get an -old version of nmake reportedly available from: - - ftp://ftp.microsoft.com/Softlib/MSLFILES/nmake15.exe - -Another option is to use the make written in Perl, available from -CPAN: - - http://www.cpan.org/authors/id/NI-S/Make-0.03.tar.gz - -You may also use dmake. See L above on how to get it. - -Note that MakeMaker actually emits makefiles with different syntax -depending on what 'make' it thinks you are using. Therefore, it is -important that one of the following values appears in Config.pm: - - make='nmake' # MakeMaker emits nmake syntax - make='dmake' # MakeMaker emits dmake syntax - any other value # MakeMaker emits generic make syntax - (e.g GNU make, or Perl make) - -If the value doesn't match the 'make' program you want to use, -edit Config.pm to fix it. - -If a module implements XSUBs, you will need one of the supported -C compilers. You must make sure you have set up the environment for -the compiler for command-line compilation. - -If a module does not build for some reason, look carefully for -why it failed, and report problems to the module author. If -it looks like the extension building support is at fault, report -that with full details of how the build failed using the perlbug -utility. - -=item Command-line Wildcard Expansion - -The default command shells on DOS descendant operating systems (such -as they are) usually do not expand wildcard arguments supplied to -programs. They consider it the application's job to handle that. -This is commonly achieved by linking the application (in our case, -perl) with startup code that the C runtime libraries usually provide. -However, doing that results in incompatible perl versions (since the -behavior of the argv expansion code differs depending on the -compiler, and it is even buggy on some compilers). Besides, it may -be a source of frustration if you use such a perl binary with an -alternate shell that *does* expand wildcards. - -Instead, the following solution works rather well. The nice things -about it: 1) you can start using it right away 2) it is more powerful, -because it will do the right thing with a pattern like */*/*.c -3) you can decide whether you do/don't want to use it 4) you can -extend the method to add any customizations (or even entirely -different kinds of wildcard expansion). - - C:\> copy con c:\perl\lib\Wild.pm - # Wild.pm - emulate shell @ARGV expansion on shells that don't - use File::DosGlob; - @ARGV = map { - my @g = File::DosGlob::glob($_) if /[*?]/; - @g ? @g : $_; - } @ARGV; - 1; - ^Z - C:\> set PERL5OPT=-MWild - C:\> perl -le "for (@ARGV) { print }" */*/perl*.c - p4view/perl/perl.c - p4view/perl/perlio.c - p4view/perl/perly.c - perl5.005/win32/perlglob.c - perl5.005/win32/perllib.c - perl5.005/win32/perlglob.c - perl5.005/win32/perllib.c - perl5.005/win32/perlglob.c - perl5.005/win32/perllib.c - -Note there are two distinct steps there: 1) You'll have to create -Wild.pm and put it in your perl lib directory. 2) You'll need to -set the PERL5OPT environment variable. If you want argv expansion -to be the default, just set PERL5OPT in your default startup -environment. - -If you are using the Visual C compiler, you can get the C runtime's -command line wildcard expansion built into perl binary. The resulting -binary will always expand unquoted command lines, which may not be -what you want if you use a shell that does that for you. The expansion -done is also somewhat less powerful than the approach suggested above. - -=item Win32 Specific Extensions - -A number of extensions specific to the Win32 platform are available -from CPAN. You may find that many of these extensions are meant to -be used under the Activeware port of Perl, which used to be the only -native port for the Win32 platform. Since the Activeware port does not -have adequate support for Perl's extension building tools, these -extensions typically do not support those tools either, and therefore -cannot be built using the generic steps shown in the previous section. - -To ensure smooth transitioning of existing code that uses the -ActiveState port, there is a bundle of Win32 extensions that contains -all of the ActiveState extensions and most other Win32 extensions from -CPAN in source form, along with many added bugfixes, and with MakeMaker -support. This bundle is available at: - - http://www.cpan.org/authors/id/GSAR/libwin32-0.151.zip - -See the README in that distribution for building and installation -instructions. Look for later versions that may be available at the -same location. - -=item Running Perl Scripts - -Perl scripts on UNIX use the "#!" (a.k.a "shebang") line to -indicate to the OS that it should execute the file using perl. -Win32 has no comparable means to indicate arbitrary files are -executables. - -Instead, all available methods to execute plain text files on -Win32 rely on the file "extension". There are three methods -to use this to execute perl scripts: - -=over 8 - -=item 1 - -There is a facility called "file extension associations" that will -work in Windows NT 4.0. This can be manipulated via the two -commands "assoc" and "ftype" that come standard with Windows NT -4.0. Type "ftype /?" for a complete example of how to set this -up for perl scripts (Say what? You thought Windows NT wasn't -perl-ready? :). - -=item 2 - -Since file associations don't work everywhere, and there are -reportedly bugs with file associations where it does work, the -old method of wrapping the perl script to make it look like a -regular batch file to the OS, may be used. The install process -makes available the "pl2bat.bat" script which can be used to wrap -perl scripts into batch files. For example: - - pl2bat foo.pl - -will create the file "FOO.BAT". Note "pl2bat" strips any -.pl suffix and adds a .bat suffix to the generated file. - -If you use the 4DOS/NT or similar command shell, note that -"pl2bat" uses the "%*" variable in the generated batch file to -refer to all the command line arguments, so you may need to make -sure that construct works in batch files. As of this writing, -4DOS/NT users will need a "ParameterChar = *" statement in their -4NT.INI file, or will need to execute "setdos /p*" in the 4DOS/NT -startup file to enable this to work. - -=item 3 - -Using "pl2bat" has a few problems: the file name gets changed, -so scripts that rely on C<$0> to find what they must do may not -run properly; running "pl2bat" replicates the contents of the -original script, and so this process can be maintenance intensive -if the originals get updated often. A different approach that -avoids both problems is possible. - -A script called "runperl.bat" is available that can be copied -to any filename (along with the .bat suffix). For example, -if you call it "foo.bat", it will run the file "foo" when it is -executed. Since you can run batch files on Win32 platforms simply -by typing the name (without the extension), this effectively -runs the file "foo", when you type either "foo" or "foo.bat". -With this method, "foo.bat" can even be in a different location -than the file "foo", as long as "foo" is available somewhere on -the PATH. If your scripts are on a filesystem that allows symbolic -links, you can even avoid copying "runperl.bat". - -Here's a diversion: copy "runperl.bat" to "runperl", and type -"runperl". Explain the observed behavior, or lack thereof. :) -Hint: .gnidnats llits er'uoy fi ,"lrepnur" eteled :tniH - -=back - -=item Miscellaneous Things - -A full set of HTML documentation is installed, so you should be -able to use it if you have a web browser installed on your -system. - -C is also a useful tool for browsing information contained -in the documentation, especially in conjunction with a pager -like C (recent versions of which have Win32 support). You may -have to set the PAGER environment variable to use a specific pager. -"perldoc -f foo" will print information about the perl operator -"foo". - -If you find bugs in perl, you can run C to create a -bug report (you may have to send it manually if C cannot -find a mailer on your system). - -=back - -=head1 BUGS AND CAVEATS - -Some of the built-in functions do not act exactly as documented in -L, and a few are not implemented at all. To avoid -surprises, particularly if you have had prior exposure to Perl -in other operating environments or if you intend to write code -that will be portable to other environments, see L -for a reasonably definitive list of these differences. - -Not all extensions available from CPAN may build or work properly -in the Win32 environment. See L. - -Most C related calls are supported, but they may not -behave as on Unix platforms. See L for the full list. - -Signal handling may not behave as on Unix platforms (where it -doesn't exactly "behave", either :). For instance, calling C -or C from signal handlers will cause an exception, since most -implementations of C on Win32 are severely crippled. -Thus, signals may work only for simple things like setting a flag -variable in the handler. Using signals under this port should -currently be considered unsupported. - -Please send detailed descriptions of any problems and solutions that -you may find to >, along with the output produced -by C. - -=head1 AUTHORS - -=over 4 - -Gary Ng E71564.1743@CompuServe.COME - -Gurusamy Sarathy Egsar@activestate.comE - -Nick Ing-Simmons Enick@ni-s.u-net.comE - -=back - -This document is maintained by Gurusamy Sarathy. - -=head1 SEE ALSO - -L - -=head1 HISTORY - -This port was originally contributed by Gary Ng around 5.003_24, -and borrowed from the Hip Communications port that was available -at the time. Various people have made numerous and sundry hacks -since then. - -Borland support was added in 5.004_01 (Gurusamy Sarathy). - -GCC/mingw32 support was added in 5.005 (Nick Ing-Simmons). - -Support for PERL_OBJECT was added in 5.005 (ActiveState Tool Corp). - -Support for fork() emulation was added in 5.6 (ActiveState Tool Corp). - -Win9x support was added in 5.6 (Benjamin Stuhl). - -Last updated: 22 March 2000 - -=cut +If you read this file _as_is_, just ignore the funny characters you +see. It is written in the POD format (see pod/perlpod.pod) which is +specially designed to be readable as is. + +=head1 NAME + +perlwin32 - Perl under Win32 + +=head1 SYNOPSIS + +These are instructions for building Perl under Windows (9x, NT and +2000). + +=head1 DESCRIPTION + +Before you start, you should glance through the README file +found in the top-level directory where the Perl distribution +was extracted. Make sure you read and understand the terms under +which this software is being distributed. + +Also make sure you read L below for the +known limitations of this port. + +The INSTALL file in the perl top-level has much information that is +only relevant to people building Perl on Unix-like systems. In +particular, you can safely ignore any information that talks about +"Configure". + +You may also want to look at two other options for building +a perl that will work on Windows NT: the README.cygwin and +README.os2 files, which each give a different set of rules to build +a Perl that will work on Win32 platforms. Those two methods will +probably enable you to build a more Unix-compatible perl, but you +will also need to download and use various other build-time and +run-time support software described in those files. + +This set of instructions is meant to describe a so-called "native" +port of Perl to Win32 platforms. The resulting Perl requires no +additional software to run (other than what came with your operating +system). Currently, this port is capable of using one of the +following compilers: + + Borland C++ version 5.02 or later + Microsoft Visual C++ version 4.2 or later + Mingw32 with GCC version 2.95.2 or better + +The last of these is a high quality freeware compiler. Support +for it is still experimental. (Older versions of GCC are known +not to work.) + +This port currently supports MakeMaker (the set of modules that +is used to build extensions to perl). Therefore, you should be +able to build and install most extensions found in the CPAN sites. +See L below for general hints about this. + +=head2 Setting Up + +=over 4 + +=item Make + +You need a "make" program to build the sources. If you are using +Visual C++ under Windows NT or 2000, nmake will work. All other +builds need dmake. + +dmake is a freely available make that has very nice macro features +and parallelability. + +A port of dmake for Windows is available from: + + http://www.cpan.org/authors/id/GSAR/dmake-4.1pl1-win32.zip + +(This is a fixed version of original dmake sources obtained from +http://www.wticorp.com/dmake/. As of version 4.1PL1, the original +sources did not build as shipped, and had various other problems. +A patch is included in the above fixed version.) + +Fetch and install dmake somewhere on your path (follow the instructions +in the README.NOW file). + +=item Command Shell + +Use the default "cmd" shell that comes with NT. Some versions of the +popular 4DOS/NT shell have incompatibilities that may cause you trouble. +If the build fails under that shell, try building again with the cmd +shell. + +The nmake Makefile also has known incompatibilities with the +"command.com" shell that comes with Windows 9x. You will need to +use dmake and makefile.mk to build under Windows 9x. + +The surest way to build it is on Windows NT, using the cmd shell. + +Make sure the path to the build directory does not contain spaces. The +build usually works in this circumstance, but some tests will fail. + +=item Borland C++ + +If you are using the Borland compiler, you will need dmake. +(The make that Borland supplies is seriously crippled, and will not +work for MakeMaker builds.) + +See L/"Make"> above. + +=item Microsoft Visual C++ + +The nmake that comes with Visual C++ will suffice for building. +You will need to run the VCVARS32.BAT file usually found somewhere +like C:\MSDEV4.2\BIN. This will set your build environment. + +You can also use dmake to build using Visual C++, provided: +you set OSRELEASE to "microsft" (or whatever the directory name +under which the Visual C dmake configuration lives) in your environment, +and edit win32/config.vc to change "make=nmake" into "make=dmake". The +latter step is only essential if you want to use dmake as your default +make for building extensions using MakeMaker. + +=item Mingw32 with GCC + +GCC-2.95.2 binaries can be downloaded from: + + ftp://ftp.xraylith.wisc.edu/pub/khan/gnu-win32/mingw32/ + +The GCC-2.95.2 bundle comes with Mingw32 libraries and headers. + +Make sure you install the binaries that work with MSVCRT.DLL as indicated +in the README for the GCC bundle. You may need to set up a few environment +variables (usually run from a batch file). + +The version of gcc-2.95.2-msvcrt.exe released 7 November 1999 left out +a fix for certain command line quotes, so be sure to download and install +fixes/quote-fix-msvcrt.exe too. + +You also need dmake. See L above on how to get it. + +=back + +=head2 Building + +=over 4 + +=item * + +Make sure you are in the "win32" subdirectory under the perl toplevel. +This directory contains a "Makefile" that will work with +versions of nmake that come with Visual C++, and a dmake "makefile.mk" +that will work for all supported compilers. The defaults in the dmake +makefile are setup to build using the GCC compiler. + +=item * + +Edit the makefile.mk (or Makefile, if using nmake) and change the values +of INST_DRV and INST_TOP. You can also enable various build +flags. These are explained in the makefiles. + +You will have to make sure CCTYPE is set correctly, and CCHOME points +to wherever you installed your compiler. + +The default value for CCHOME in the makefiles for Visual C++ +may not be correct for some versions. Make sure the default exists +and is valid. + +If you have either the source or a library that contains des_fcrypt(), +enable the appropriate option in the makefile. des_fcrypt() is not +bundled with the distribution due to US Government restrictions +on the export of cryptographic software. Nevertheless, this routine +is part of the "libdes" library (written by Eric Young) which is widely +available worldwide, usually along with SSLeay (for example: +"ftp://fractal.mta.ca/pub/crypto/SSLeay/DES/"). Set CRYPT_SRC to the +name of the file that implements des_fcrypt(). Alternatively, if +you have built a library that contains des_fcrypt(), you can set +CRYPT_LIB to point to the library name. The location above contains +many versions of the "libdes" library, all with slightly different +implementations of des_fcrypt(). Older versions have a single, +self-contained file (fcrypt.c) that implements crypt(), so they may be +easier to use. A patch against the fcrypt.c found in libdes-3.06 is +in des_fcrypt.patch. + +Perl will also build without des_fcrypt(), but the crypt() builtin will +fail at run time. + +Be sure to read the instructions near the top of the makefiles carefully. + +=item * + +Type "dmake" (or "nmake" if you are using that make). + +This should build everything. Specifically, it will create perl.exe, +perl56.dll at the perl toplevel, and various other extension dll's +under the lib\auto directory. If the build fails for any reason, make +sure you have done the previous steps correctly. + +=back + +=head2 Testing + +Type "dmake test" (or "nmake test"). This will run most of the tests from +the testsuite (many tests will be skipped). + +There should be no test failures when running under Windows NT 4.0 or +Windows 2000. Many tests I fail under Windows 9x due to the inferior +command shell. + +Some test failures may occur if you use a command shell other than the +native "cmd.exe", or if you are building from a path that contains +spaces. So don't do that. + +If you are running the tests from a emacs shell window, you may see +failures in op/stat.t. Run "dmake test-notty" in that case. + +If you're using the Borland compiler, you may see a failure in op/taint.t +arising from the inability to find the Borland Runtime DLLs on the system +default path. You will need to copy the DLLs reported by the messages +from where Borland chose to install it, into the Windows system directory +(usually somewhere like C:\WINNT\SYSTEM32), and rerun the test. + +Please report any other failures as described under L. + +=head2 Installation + +Type "dmake install" (or "nmake install"). This will put the newly +built perl and the libraries under whatever C points to in the +Makefile. It will also install the pod documentation under +C<$INST_TOP\$VERSION\lib\pod> and HTML versions of the same under +C<$INST_TOP\$VERSION\lib\pod\html>. To use the Perl you just installed, +you will need to add two components to your PATH environment variable, +C<$INST_TOP\$VERSION\bin>, and C<$INST_TOP\$VERSION\bin\$ARCHNAME>. +For example: + + set PATH c:\perl\5.6.0\bin;c:\perl\5.6.0\bin\MSWin32-x86;%PATH% + +If you opt to comment out INST_VER and INST_ARCH in the makefiles, the +installation structure is much simpler. In that case, it will be +sufficient to add a single entry to the path, for instance: + + set PATH c:\perl\bin;%PATH% + +=head2 Usage Hints + +=over 4 + +=item Environment Variables + +The installation paths that you set during the build get compiled +into perl, so you don't have to do anything additional to start +using that perl (except add its location to your PATH variable). + +If you put extensions in unusual places, you can set PERL5LIB +to a list of paths separated by semicolons where you want perl +to look for libraries. Look for descriptions of other environment +variables you can set in L. + +You can also control the shell that perl uses to run system() and +backtick commands via PERL5SHELL. See L. + +Perl does not depend on the registry, but it can look up certain default +values if you choose to put them there. Perl attempts to read entries from +C and C. +Entries in the former override entries in the latter. One or more of the +following entries (of type REG_SZ or REG_EXPAND_SZ) may be set: + + lib-$] version-specific standard library path to add to @INC + lib standard library path to add to @INC + sitelib-$] version-specific site library path to add to @INC + sitelib site library path to add to @INC + vendorlib-$] version-specific vendor library path to add to @INC + vendorlib vendor library path to add to @INC + PERL* fallback for all %ENV lookups that begin with "PERL" + +Note the C<$]> in the above is not literal. Substitute whatever version +of perl you want to honor that entry, e.g. C<5.6.0>. Paths must be +separated with semicolons, as usual on win32. + +=item File Globbing + +By default, perl handles file globbing using the File::Glob extension, +which provides portable globbing. + +If you want perl to use globbing that emulates the quirks of DOS +filename conventions, you might want to consider using File::DosGlob +to override the internal glob() implementation. See L for +details. + +=item Using perl from the command line + +If you are accustomed to using perl from various command-line +shells found in UNIX environments, you will be less than pleased +with what Windows offers by way of a command shell. + +The crucial thing to understand about the Windows environment is that +the command line you type in is processed twice before Perl sees it. +First, your command shell (usually CMD.EXE on Windows NT, and +COMMAND.COM on Windows 9x) preprocesses the command line, to handle +redirection, environment variable expansion, and location of the +executable to run. Then, the perl executable splits the remaining +command line into individual arguments, using the C runtime library +upon which Perl was built. + +It is particularly important to note that neither the shell nor the C +runtime do any wildcard expansions of command-line arguments (so +wildcards need not be quoted). Also, the quoting behaviours of the +shell and the C runtime are rudimentary at best (and may, if you are +using a non-standard shell, be inconsistent). The only (useful) quote +character is the double quote ("). It can be used to protect spaces in +arguments and other special characters. The Windows NT documentation +has almost no description of how the quoting rules are implemented, but +here are some general observations based on experiments: The C runtime +breaks arguments at spaces and passes them to programs in argc/argv. +Doublequotes can be used to prevent arguments with spaces in them from +being split up. You can put a double quote in an argument by escaping +it with a backslash and enclosing the whole argument within double +quotes. The backslash and the pair of double quotes surrounding the +argument will be stripped by the C runtime. + +The file redirection characters "<", ">", and "|" can be quoted by +double quotes (although there are suggestions that this may not always +be true). Single quotes are not treated as quotes by the shell or the C +runtime. The caret "^" has also been observed to behave as a quoting +character, but this appears to be a shell feature, and the caret is not +stripped from the command line, so Perl still sees it (and the C runtime +phase does not treat the caret as a quote character). + +Here are some examples of usage of the "cmd" shell: + +This prints two doublequotes: + + perl -e "print '\"\"' " + +This does the same: + + perl -e "print \"\\\"\\\"\" " + +This prints "bar" and writes "foo" to the file "blurch": + + perl -e "print 'foo'; print STDERR 'bar'" > blurch + +This prints "foo" ("bar" disappears into nowhereland): + + perl -e "print 'foo'; print STDERR 'bar'" 2> nul + +This prints "bar" and writes "foo" into the file "blurch": + + perl -e "print 'foo'; print STDERR 'bar'" 1> blurch + +This pipes "foo" to the "less" pager and prints "bar" on the console: + + perl -e "print 'foo'; print STDERR 'bar'" | less + +This pipes "foo\nbar\n" to the less pager: + + perl -le "print 'foo'; print STDERR 'bar'" 2>&1 | less + +This pipes "foo" to the pager and writes "bar" in the file "blurch": + + perl -e "print 'foo'; print STDERR 'bar'" 2> blurch | less + + +Discovering the usefulness of the "command.com" shell on Windows 9x +is left as an exercise to the reader :) + +One particularly pernicious problem with the 4NT command shell for +Windows NT is that it (nearly) always treats a % character as indicating +that environment variable expansion is needed. Under this shell, it is +therefore important to always double any % characters which you want +Perl to see (for example, for hash variables), even when they are +quoted. + +=item Building Extensions + +The Comprehensive Perl Archive Network (CPAN) offers a wealth +of extensions, some of which require a C compiler to build. +Look in http://www.cpan.org/ for more information on CPAN. + +Note that not all of the extensions available from CPAN may work +in the Win32 environment; you should check the information at +http://testers.cpan.org/ before investing too much effort into +porting modules that don't readily build. + +Most extensions (whether they require a C compiler or not) can +be built, tested and installed with the standard mantra: + + perl Makefile.PL + $MAKE + $MAKE test + $MAKE install + +where $MAKE is whatever 'make' program you have configured perl to +use. Use "perl -V:make" to find out what this is. Some extensions +may not provide a testsuite (so "$MAKE test" may not do anything, or +fail), but most serious ones do. + +It is important that you use a supported 'make' program, and +ensure Config.pm knows about it. If you don't have nmake, you can +either get dmake from the location mentioned earlier, or get an +old version of nmake reportedly available from: + + ftp://ftp.microsoft.com/Softlib/MSLFILES/nmake15.exe + +Another option is to use the make written in Perl, available from +CPAN: + + http://www.cpan.org/authors/id/NI-S/Make-0.03.tar.gz + +You may also use dmake. See L above on how to get it. + +Note that MakeMaker actually emits makefiles with different syntax +depending on what 'make' it thinks you are using. Therefore, it is +important that one of the following values appears in Config.pm: + + make='nmake' # MakeMaker emits nmake syntax + make='dmake' # MakeMaker emits dmake syntax + any other value # MakeMaker emits generic make syntax + (e.g GNU make, or Perl make) + +If the value doesn't match the 'make' program you want to use, +edit Config.pm to fix it. + +If a module implements XSUBs, you will need one of the supported +C compilers. You must make sure you have set up the environment for +the compiler for command-line compilation. + +If a module does not build for some reason, look carefully for +why it failed, and report problems to the module author. If +it looks like the extension building support is at fault, report +that with full details of how the build failed using the perlbug +utility. + +=item Command-line Wildcard Expansion + +The default command shells on DOS descendant operating systems (such +as they are) usually do not expand wildcard arguments supplied to +programs. They consider it the application's job to handle that. +This is commonly achieved by linking the application (in our case, +perl) with startup code that the C runtime libraries usually provide. +However, doing that results in incompatible perl versions (since the +behavior of the argv expansion code differs depending on the +compiler, and it is even buggy on some compilers). Besides, it may +be a source of frustration if you use such a perl binary with an +alternate shell that *does* expand wildcards. + +Instead, the following solution works rather well. The nice things +about it: 1) you can start using it right away 2) it is more powerful, +because it will do the right thing with a pattern like */*/*.c +3) you can decide whether you do/don't want to use it 4) you can +extend the method to add any customizations (or even entirely +different kinds of wildcard expansion). + + C:\> copy con c:\perl\lib\Wild.pm + # Wild.pm - emulate shell @ARGV expansion on shells that don't + use File::DosGlob; + @ARGV = map { + my @g = File::DosGlob::glob($_) if /[*?]/; + @g ? @g : $_; + } @ARGV; + 1; + ^Z + C:\> set PERL5OPT=-MWild + C:\> perl -le "for (@ARGV) { print }" */*/perl*.c + p4view/perl/perl.c + p4view/perl/perlio.c + p4view/perl/perly.c + perl5.005/win32/perlglob.c + perl5.005/win32/perllib.c + perl5.005/win32/perlglob.c + perl5.005/win32/perllib.c + perl5.005/win32/perlglob.c + perl5.005/win32/perllib.c + +Note there are two distinct steps there: 1) You'll have to create +Wild.pm and put it in your perl lib directory. 2) You'll need to +set the PERL5OPT environment variable. If you want argv expansion +to be the default, just set PERL5OPT in your default startup +environment. + +If you are using the Visual C compiler, you can get the C runtime's +command line wildcard expansion built into perl binary. The resulting +binary will always expand unquoted command lines, which may not be +what you want if you use a shell that does that for you. The expansion +done is also somewhat less powerful than the approach suggested above. + +=item Win32 Specific Extensions + +A number of extensions specific to the Win32 platform are available +from CPAN. You may find that many of these extensions are meant to +be used under the Activeware port of Perl, which used to be the only +native port for the Win32 platform. Since the Activeware port does not +have adequate support for Perl's extension building tools, these +extensions typically do not support those tools either, and therefore +cannot be built using the generic steps shown in the previous section. + +To ensure smooth transitioning of existing code that uses the +ActiveState port, there is a bundle of Win32 extensions that contains +all of the ActiveState extensions and most other Win32 extensions from +CPAN in source form, along with many added bugfixes, and with MakeMaker +support. This bundle is available at: + + http://www.cpan.org/authors/id/GSAR/libwin32-0.151.zip + +See the README in that distribution for building and installation +instructions. Look for later versions that may be available at the +same location. + +=item Running Perl Scripts + +Perl scripts on UNIX use the "#!" (a.k.a "shebang") line to +indicate to the OS that it should execute the file using perl. +Win32 has no comparable means to indicate arbitrary files are +executables. + +Instead, all available methods to execute plain text files on +Win32 rely on the file "extension". There are three methods +to use this to execute perl scripts: + +=over 8 + +=item 1 + +There is a facility called "file extension associations" that will +work in Windows NT 4.0. This can be manipulated via the two +commands "assoc" and "ftype" that come standard with Windows NT +4.0. Type "ftype /?" for a complete example of how to set this +up for perl scripts (Say what? You thought Windows NT wasn't +perl-ready? :). + +=item 2 + +Since file associations don't work everywhere, and there are +reportedly bugs with file associations where it does work, the +old method of wrapping the perl script to make it look like a +regular batch file to the OS, may be used. The install process +makes available the "pl2bat.bat" script which can be used to wrap +perl scripts into batch files. For example: + + pl2bat foo.pl + +will create the file "FOO.BAT". Note "pl2bat" strips any +.pl suffix and adds a .bat suffix to the generated file. + +If you use the 4DOS/NT or similar command shell, note that +"pl2bat" uses the "%*" variable in the generated batch file to +refer to all the command line arguments, so you may need to make +sure that construct works in batch files. As of this writing, +4DOS/NT users will need a "ParameterChar = *" statement in their +4NT.INI file, or will need to execute "setdos /p*" in the 4DOS/NT +startup file to enable this to work. + +=item 3 + +Using "pl2bat" has a few problems: the file name gets changed, +so scripts that rely on C<$0> to find what they must do may not +run properly; running "pl2bat" replicates the contents of the +original script, and so this process can be maintenance intensive +if the originals get updated often. A different approach that +avoids both problems is possible. + +A script called "runperl.bat" is available that can be copied +to any filename (along with the .bat suffix). For example, +if you call it "foo.bat", it will run the file "foo" when it is +executed. Since you can run batch files on Win32 platforms simply +by typing the name (without the extension), this effectively +runs the file "foo", when you type either "foo" or "foo.bat". +With this method, "foo.bat" can even be in a different location +than the file "foo", as long as "foo" is available somewhere on +the PATH. If your scripts are on a filesystem that allows symbolic +links, you can even avoid copying "runperl.bat". + +Here's a diversion: copy "runperl.bat" to "runperl", and type +"runperl". Explain the observed behavior, or lack thereof. :) +Hint: .gnidnats llits er'uoy fi ,"lrepnur" eteled :tniH + +=back + +=item Miscellaneous Things + +A full set of HTML documentation is installed, so you should be +able to use it if you have a web browser installed on your +system. + +C is also a useful tool for browsing information contained +in the documentation, especially in conjunction with a pager +like C (recent versions of which have Win32 support). You may +have to set the PAGER environment variable to use a specific pager. +"perldoc -f foo" will print information about the perl operator +"foo". + +If you find bugs in perl, you can run C to create a +bug report (you may have to send it manually if C cannot +find a mailer on your system). + +=back + +=head1 BUGS AND CAVEATS + +Some of the built-in functions do not act exactly as documented in +L, and a few are not implemented at all. To avoid +surprises, particularly if you have had prior exposure to Perl +in other operating environments or if you intend to write code +that will be portable to other environments, see L +for a reasonably definitive list of these differences. + +Not all extensions available from CPAN may build or work properly +in the Win32 environment. See L. + +Most C related calls are supported, but they may not +behave as on Unix platforms. See L for the full list. + +Signal handling may not behave as on Unix platforms (where it +doesn't exactly "behave", either :). For instance, calling C +or C from signal handlers will cause an exception, since most +implementations of C on Win32 are severely crippled. +Thus, signals may work only for simple things like setting a flag +variable in the handler. Using signals under this port should +currently be considered unsupported. + +Please send detailed descriptions of any problems and solutions that +you may find to >, along with the output produced +by C. + +=head1 AUTHORS + +=over 4 + +Gary Ng E71564.1743@CompuServe.COME + +Gurusamy Sarathy Egsar@activestate.comE + +Nick Ing-Simmons Enick@ni-s.u-net.comE + +=back + +This document is maintained by Gurusamy Sarathy. + +=head1 SEE ALSO + +L + +=head1 HISTORY + +This port was originally contributed by Gary Ng around 5.003_24, +and borrowed from the Hip Communications port that was available +at the time. Various people have made numerous and sundry hacks +since then. + +Borland support was added in 5.004_01 (Gurusamy Sarathy). + +GCC/mingw32 support was added in 5.005 (Nick Ing-Simmons). + +Support for PERL_OBJECT was added in 5.005 (ActiveState Tool Corp). + +Support for fork() emulation was added in 5.6 (ActiveState Tool Corp). + +Win9x support was added in 5.6 (Benjamin Stuhl). + +Last updated: 22 March 2000 + +=cut diff --git a/djgpp/configure.bat b/djgpp/configure.bat index 64b46ec..e7d41d7 100644 --- a/djgpp/configure.bat +++ b/djgpp/configure.bat @@ -1,37 +1,37 @@ -@echo off -set CONFIG= -set PATH_SEPARATOR=; -set PATH_EXPAND=y -sh -c 'if test $PATH_SEPARATOR = ";"; then exit 1; fi' -if ERRORLEVEL 1 goto path_sep_ok -echo Error: -echo Make sure the environment variable PATH_SEPARATOR=; while building perl! -echo Please check your DJGPP.ENV! -goto end - -:path_sep_ok -sh -c 'if test $PATH_EXPAND = "Y" -o $PATH_EXPAND = "y"; then exit 1; fi' -if ERRORLEVEL 1 goto path_exp_ok -echo Error: -echo Make sure the environment variable PATH_EXPAND=Y while building perl! -echo Please check your DJGPP.ENV! -goto end - -:path_exp_ok -sh -c '$SHELL -c "exit 128"' -if ERRORLEVEL 128 goto shell_ok - -echo Error: -echo The SHELL environment variable must be set to the full path of your sh.exe! -goto end - -:shell_ok -sh -c 'if test ! -d /tmp; then mkdir /tmp; fi' -cp djgpp.c config.over .. -cd .. -echo Running sed... -sh djgpp/djgppsed.sh - -echo Running Configure... -sh Configure %1 %2 %3 %4 %5 %6 %7 %8 %9 -:end +@echo off +set CONFIG= +set PATH_SEPARATOR=; +set PATH_EXPAND=y +sh -c 'if test $PATH_SEPARATOR = ";"; then exit 1; fi' +if ERRORLEVEL 1 goto path_sep_ok +echo Error: +echo Make sure the environment variable PATH_SEPARATOR=; while building perl! +echo Please check your DJGPP.ENV! +goto end + +:path_sep_ok +sh -c 'if test $PATH_EXPAND = "Y" -o $PATH_EXPAND = "y"; then exit 1; fi' +if ERRORLEVEL 1 goto path_exp_ok +echo Error: +echo Make sure the environment variable PATH_EXPAND=Y while building perl! +echo Please check your DJGPP.ENV! +goto end + +:path_exp_ok +sh -c '$SHELL -c "exit 128"' +if ERRORLEVEL 128 goto shell_ok + +echo Error: +echo The SHELL environment variable must be set to the full path of your sh.exe! +goto end + +:shell_ok +sh -c 'if test ! -d /tmp; then mkdir /tmp; fi' +cp djgpp.c config.over .. +cd .. +echo Running sed... +sh djgpp/djgppsed.sh + +echo Running Configure... +sh Configure %1 %2 %3 %4 %5 %6 %7 %8 %9 +:end diff --git a/win32/Makefile b/win32/Makefile index 094f93c..af11990 100644 --- a/win32/Makefile +++ b/win32/Makefile @@ -1,1120 +1,1120 @@ -# -# Makefile to build perl on Windows NT using Microsoft NMAKE. -# -# This is set up to build a perl.exe that runs off a shared library -# (perl56.dll). Also makes individual DLLs for the XS extensions. -# - -## -## Make sure you read README.win32 *before* you mess with anything here! -## - -## -## Build configuration. Edit the values below to suit your needs. -## - -# -# Set these to wherever you want "nmake install" to put your -# newly built perl. -# -INST_DRV = c: -INST_TOP = $(INST_DRV)\perl - -# -# Comment this out if you DON'T want your perl installation to be versioned. -# This means that the new installation will overwrite any files from the -# old installation at the same INST_TOP location. Leaving it enabled is -# the safest route, as perl adds the extra version directory to all the -# locations it installs files to. If you disable it, an alternative -# versioned installation can be obtained by setting INST_TOP above to a -# path that includes an arbitrary version string. -# -INST_VER = \5.6.0 - -# -# Comment this out if you DON'T want your perl installation to have -# architecture specific components. This means that architecture- -# specific files will be installed along with the architecture-neutral -# files. Leaving it enabled is safer and more flexible, in case you -# want to build multiple flavors of perl and install them together in -# the same location. Commenting it out gives you a simpler -# installation that is easier to understand for beginners. -# -INST_ARCH = \$(ARCHNAME) - -# -# uncomment to enable multiple interpreters. This is need for fork() -# emulation. -# -#USE_MULTI = define - -# -# Beginnings of interpreter cloning/threads; still very incomplete. -# This should be enabled to get the fork() emulation. This needs -# USE_MULTI as well. -# -#USE_ITHREADS = define - -# -# uncomment to enable the implicit "host" layer for all system calls -# made by perl. This needs USE_MULTI above. This is also needed to -# get fork(). -# -#USE_IMP_SYS = define - -# -# WARNING! This option is deprecated and will eventually go away (enable -# USE_ITHREADS instead). -# -# uncomment to enable threads-capabilities. This is incompatible with -# USE_ITHREADS, and is only here for people who may have come to rely -# on the experimental Thread support that was in 5.005. -# -#USE_5005THREADS= define - -# -# WARNING! This option is deprecated and will eventually go away (enable -# USE_MULTI instead). -# -# uncomment next line if you want to use the PERL_OBJECT build option. -# DO NOT ENABLE unless you have legacy code that relies on the C++ -# CPerlObj class that was available in 5.005. This cannot be enabled -# if you ask for USE_5005THREADS above. -# -#USE_OBJECT = define - -# -# uncomment one of the following lines if you are using either -# Visual C++ 2.x or Visual C++ 6.x (aka Visual Studio 98) -# -#CCTYPE = MSVC20 -#CCTYPE = MSVC60 - -# -# uncomment next line if you want debug version of perl (big,slow) -# -#CFG = Debug - -# -# uncomment to enable use of PerlCRT.DLL when using the Visual C compiler. -# It has patches that fix known bugs in older versions of MSVCRT.DLL. -# This currently requires VC 5.0 with Service Pack 3 or later. -# Get it from CPAN at http://www.perl.com/CPAN/authors/id/D/DO/DOUGL/ -# and follow the directions in the package to install. -# -# Not recommended if you have VC 6.x and you're not running Windows 9x. -# -#USE_PERLCRT = define - -# -# uncomment to enable linking with setargv.obj under the Visual C -# compiler. Setting this options enables perl to expand wildcards in -# arguments, but it may be harder to use alternate methods like -# File::DosGlob that are more powerful. This option is supported only with -# Visual C. -# -#USE_SETARGV = define - -# -# if you have the source for des_fcrypt(), uncomment this and make sure the -# file exists (see README.win32). File should be located in the same -# directory as this file. -# -#CRYPT_SRC = fcrypt.c - -# -# if you didn't set CRYPT_SRC and if you have des_fcrypt() available in a -# library, uncomment this, and make sure the library exists (see README.win32) -# Specify the full pathname of the library. -# -#CRYPT_LIB = fcrypt.lib - -# -# set this if you wish to use perl's malloc -# WARNING: Turning this on/off WILL break binary compatibility with extensions -# you may have compiled with/without it. Be prepared to recompile all -# extensions if you change the default. Currently, this cannot be enabled -# if you ask for USE_IMP_SYS above. -# -#PERL_MALLOC = define - -# -# set the install locations of the compiler include/libraries -# Running VCVARS32.BAT is *required* when using Visual C. -# Some versions of Visual C don't define MSVCDIR in the environment, -# so you may have to set CCHOME explicitly (spaces in the path name should -# not be quoted) -# -#CCHOME = f:\msvc20 -CCHOME = $(MSVCDIR) -CCINCDIR = $(CCHOME)\include -CCLIBDIR = $(CCHOME)\lib - -# -# Additional compiler flags can be specified here. -# - -# -# This should normally be disabled. Adding -DPERL_POLLUTE enables support -# for old symbols by default, at the expense of extreme pollution. You most -# probably just want to build modules that won't compile with -# perl Makefile.PL POLLUTE=1 -# instead of enabling this. Please report such modules to the respective -# authors. -# -#BUILDOPT = $(BUILDOPT) -DPERL_POLLUTE - -# -# This should normally be disabled. Enabling it will disable the File::Glob -# implementation of CORE::glob. -# -#BUILDOPT = $(BUILDOPT) -DPERL_EXTERNAL_GLOB - -# -# This should normally be disabled. Enabling it causes perl to read scripts -# in text mode (which is the 5.005 behavior) and will break ByteLoader. -#BUILDOPT = $(BUILDOPT) -DPERL_TEXTMODE_SCRIPTS - -# -# specify semicolon-separated list of extra directories that modules will -# look for libraries (spaces in path names need not be quoted) -# -EXTRALIBDIRS = - -# -# set this to your email address (perl will guess a value from -# from your loginname and your hostname, which may not be right) -# -#EMAIL = - -## -## Build configuration ends. -## - -##################### CHANGE THESE ONLY IF YOU MUST ##################### - -!IF "$(CRYPT_SRC)$(CRYPT_LIB)" == "" -D_CRYPT = undef -!ELSE -D_CRYPT = define -CRYPT_FLAG = -DHAVE_DES_FCRYPT -!ENDIF - -!IF "$(USE_OBJECT)" == "define" -PERL_MALLOC = undef -USE_5005THREADS = undef -USE_MULTI = undef -USE_IMP_SYS = define -!ENDIF - -!IF "$(PERL_MALLOC)" == "" -PERL_MALLOC = undef -!ENDIF - -!IF "$(USE_5005THREADS)" == "" -USE_5005THREADS = undef -!ENDIF - -!IF "$(USE_5005THREADS)" == "define" -USE_ITHREADS = undef -!ENDIF - -!IF "$(USE_IMP_SYS)" == "define" -PERL_MALLOC = undef -!ENDIF - -!IF "$(USE_MULTI)" == "" -USE_MULTI = undef -!ENDIF - -!IF "$(USE_OBJECT)" == "" -USE_OBJECT = undef -!ENDIF - -!IF "$(USE_ITHREADS)" == "" -USE_ITHREADS = undef -!ENDIF - -!IF "$(USE_IMP_SYS)" == "" -USE_IMP_SYS = undef -!ENDIF - -!IF "$(USE_PERLCRT)" == "" -USE_PERLCRT = undef -!ENDIF - -!IF "$(USE_IMP_SYS)$(USE_MULTI)$(USE_5005THREADS)$(USE_OBJECT)" == "defineundefundefundef" -USE_MULTI = define -!ENDIF - -!IF "$(USE_ITHREADS)$(USE_MULTI)$(USE_OBJECT)" == "defineundefundef" -USE_MULTI = define -USE_5005THREADS = undef -!ENDIF - -!IF "$(USE_MULTI)$(USE_5005THREADS)$(USE_OBJECT)" != "undefundefundef" -BUILDOPT = $(BUILDOPT) -DPERL_IMPLICIT_CONTEXT -!ENDIF - -!IF "$(USE_IMP_SYS)" != "undef" -BUILDOPT = $(BUILDOPT) -DPERL_IMPLICIT_SYS -!ENDIF - -!IF "$(PROCESSOR_ARCHITECTURE)" == "" -PROCESSOR_ARCHITECTURE = x86 -!ENDIF - -!IF "$(USE_OBJECT)" == "define" -ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-object -!ELSE -!IF "$(USE_5005THREADS)" == "define" -ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-thread -!ELSE -!IF "$(USE_MULTI)" == "define" -ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-multi -!ELSE -ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE) -!ENDIF -!ENDIF -!ENDIF - -!IF "$(USE_ITHREADS)" == "define" -ARCHNAME = $(ARCHNAME)-thread -!ENDIF - -# Visual Studio 98 specific -!IF "$(CCTYPE)" == "MSVC60" - -# VC 6.0 can load the socket dll on demand. Makes the test suite -# run in about 10% less time. -DELAYLOAD = -DELAYLOAD:wsock32.dll -DELAYLOAD:shell32.dll delayimp.lib - -# VC 6.0 seems capable of compiling perl correctly with optimizations -# enabled. Anything earlier fails tests. -!IF "$(CFG)" == "" -CFG = Optimize -!ENDIF -!ENDIF - -ARCHDIR = ..\lib\$(ARCHNAME) -COREDIR = ..\lib\CORE -AUTODIR = ..\lib\auto -LIBDIR = ..\lib -EXTDIR = ..\ext -PODDIR = ..\pod -EXTUTILSDIR = $(LIBDIR)\ExtUtils - -# -INST_SCRIPT = $(INST_TOP)$(INST_VER)\bin -INST_BIN = $(INST_SCRIPT)$(INST_ARCH) -INST_LIB = $(INST_TOP)$(INST_VER)\lib -INST_ARCHLIB = $(INST_LIB)$(INST_ARCH) -INST_COREDIR = $(INST_ARCHLIB)\CORE -INST_POD = $(INST_LIB)\pod -INST_HTML = $(INST_POD)\html - -# -# Programs to compile, build .lib files and link -# - -CC = cl -LINK32 = link -LIB32 = $(LINK32) -lib -RSC = rc - -# -# Options -# - -INCLUDES = -I$(COREDIR) -I.\include -I. -I.. -#PCHFLAGS = -Fpc:\temp\vcmoduls.pch -YX -DEFINES = -DWIN32 -D_CONSOLE -DNO_STRICT $(CRYPT_FLAG) -LOCDEFS = -DPERLDLL -DPERL_CORE -SUBSYS = console -CXX_FLAG = -TP -GX - -!IF "$(USE_PERLCRT)" != "define" -LIBC = msvcrt.lib -!ELSE -LIBC = PerlCRT.lib -!ENDIF - -PERLEXE_RES = -PERLDLL_RES = - -!IF "$(CFG)" == "Debug" -! IF "$(CCTYPE)" == "MSVC20" -OPTIMIZE = -Od -MD -Z7 -DDEBUGGING -! ELSE -OPTIMIZE = -Od -MD -Zi -DDEBUGGING -! ENDIF -LINK_DBG = -debug -pdb:none -!ELSE -! IF "$(CFG)" == "Optimize" -# -O1 yields smaller code, which turns out to be faster than -O2 -#OPTIMIZE = -O2 -MD -DNDEBUG -OPTIMIZE = -O1 -MD -DNDEBUG -! ELSE -OPTIMIZE = -Od -MD -DNDEBUG -! ENDIF -LINK_DBG = -release -!ENDIF - -!IF "$(USE_OBJECT)" == "define" -OPTIMIZE = $(OPTIMIZE) $(CXX_FLAG) -BUILDOPT = $(BUILDOPT) -DPERL_OBJECT -!ENDIF - -!IF "$(USE_PERLCRT)" != "define" -BUILDOPT = $(BUILDOPT) -DPERL_MSVCRT_READFIX -!ENDIF - -LIBBASEFILES = $(CRYPT_LIB) \ - oldnames.lib kernel32.lib user32.lib gdi32.lib winspool.lib \ - comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib \ - netapi32.lib uuid.lib wsock32.lib mpr.lib winmm.lib \ - version.lib odbc32.lib odbccp32.lib - -# we add LIBC here, since we may be using PerlCRT.dll -LIBFILES = $(LIBBASEFILES) $(LIBC) - -CFLAGS = -nologo -Gf -W3 $(INCLUDES) $(DEFINES) $(LOCDEFS) \ - $(PCHFLAGS) $(OPTIMIZE) -LINK_FLAGS = -nologo -nodefaultlib $(LINK_DBG) \ - -libpath:"$(INST_COREDIR)" \ - -machine:$(PROCESSOR_ARCHITECTURE) -OBJOUT_FLAG = -Fo -EXEOUT_FLAG = -Fe - -CFLAGS_O = $(CFLAGS) $(BUILDOPT) - -#################### do not edit below this line ####################### -############# NO USER-SERVICEABLE PARTS BEYOND THIS POINT ############## - -o = .obj - -# -# Rules -# - -.SUFFIXES : .c $(o) .dll .lib .exe .rc .res - -.c$(o): - $(CC) -c -I$( ..\config.sh - -# this target is for when changes to the main config.sh happen -# edit config.{b,v,g}c and make this target once for each supported -# compiler (e.g. `dmake CCTYPE=BORLAND regen_config_h`) -regen_config_h: - perl config_sh.PL $(CFG_VARS) $(CFGSH_TMPL) > ..\config.sh - cd .. - -del /f perl.exe - perl configpm - cd win32 - -del /f $(CFGH_TMPL) - -mkdir $(COREDIR) - -perl -I..\lib config_h.PL "INST_VER=$(INST_VER)" - rename config.h $(CFGH_TMPL) - -$(CONFIGPM) : $(MINIPERL) ..\config.sh config_h.PL ..\minimod.pl - cd .. && miniperl configpm - if exist lib\* $(RCOPY) lib\*.* ..\lib\$(NULL) - $(XCOPY) ..\*.h $(COREDIR)\*.* - $(XCOPY) *.h $(COREDIR)\*.* - $(XCOPY) ..\ext\re\re.pm $(LIBDIR)\*.* - $(RCOPY) include $(COREDIR)\*.* - $(MINIPERL) -I..\lib config_h.PL "INST_VER=$(INST_VER)" \ - || $(MAKE) /$(MAKEFLAGS) $(CONFIGPM) - -$(MINIPERL) : $(MINIDIR) $(MINI_OBJ) - $(LINK32) -subsystem:console -out:$@ @<< - $(LINK_FLAGS) $(LIBFILES) $(MINI_OBJ) -<< - -$(MINIDIR) : - if not exist "$(MINIDIR)" mkdir "$(MINIDIR)" - -$(MINICORE_OBJ) : $(CORE_NOCFG_H) - $(CC) -c $(CFLAGS) -DPERL_EXTERNAL_GLOB $(OBJOUT_FLAG)$@ ..\$(*F).c - -$(MINIWIN32_OBJ) : $(CORE_NOCFG_H) - $(CC) -c $(CFLAGS) $(OBJOUT_FLAG)$@ $(*F).c - -# -DPERL_IMPLICIT_SYS needs C++ for perllib.c -# This is the only file that depends on perlhost.h, vmem.h, and vdir.h -!IF "$(USE_IMP_SYS)$(USE_OBJECT)" == "defineundef" -perllib$(o) : perllib.c .\perlhost.h .\vdir.h .\vmem.h - $(CC) -c -I. $(CFLAGS_O) $(CXX_FLAG) $(OBJOUT_FLAG)$@ perllib.c -!ENDIF - -# 1. we don't want to rebuild miniperl.exe when config.h changes -# 2. we don't want to rebuild miniperl.exe with non-default config.h -$(MINI_OBJ) : $(CORE_NOCFG_H) - -$(WIN32_OBJ) : $(CORE_H) -$(CORE_OBJ) : $(CORE_H) -$(DLL_OBJ) : $(CORE_H) -$(X2P_OBJ) : $(CORE_H) - -perldll.def : $(MINIPERL) $(CONFIGPM) ..\global.sym ..\pp.sym ..\makedef.pl - $(MINIPERL) -w ..\makedef.pl PLATFORM=win32 $(OPTIMIZE) $(DEFINES) $(BUILDOPT) \ - CCTYPE=$(CCTYPE) > perldll.def - -$(PERLDLL): perldll.def $(PERLDLL_OBJ) $(PERLDLL_RES) - $(LINK32) -dll -def:perldll.def -base:0x28000000 -out:$@ @<< - $(LINK_FLAGS) $(DELAYLOAD) $(LIBFILES) $(PERLDLL_OBJ) $(PERLDLL_RES) -<< - $(XCOPY) $(PERLIMPLIB) $(COREDIR) - -$(MINIMOD) : $(MINIPERL) ..\minimod.pl - cd .. && miniperl minimod.pl > lib\ExtUtils\Miniperl.pm - -..\x2p\a2p$(o) : ..\x2p\a2p.c - $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\a2p.c - -..\x2p\hash$(o) : ..\x2p\hash.c - $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\hash.c - -..\x2p\str$(o) : ..\x2p\str.c - $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\str.c - -..\x2p\util$(o) : ..\x2p\util.c - $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\util.c - -..\x2p\walk$(o) : ..\x2p\walk.c - $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\walk.c - -$(X2P) : $(MINIPERL) $(X2P_OBJ) - $(MINIPERL) ..\x2p\find2perl.PL - $(MINIPERL) ..\x2p\s2p.PL - $(LINK32) -subsystem:console -out:$@ @<< - $(LINK_FLAGS) $(LIBFILES) $(X2P_OBJ) -<< - -perlmain.c : runperl.c - copy runperl.c perlmain.c - -perlmain$(o) : perlmain.c - $(CC) $(CFLAGS_O) -UPERLDLL $(OBJOUT_FLAG)$@ -c perlmain.c - -$(PERLEXE): $(PERLDLL) $(CONFIGPM) $(PERLEXE_OBJ) $(PERLEXE_RES) - $(LINK32) -subsystem:console -out:$@ -stack:0x1000000 $(LINK_FLAGS) \ - $(LIBFILES) $(PERLEXE_OBJ) $(SETARGV_OBJ) $(PERLIMPLIB) $(PERLEXE_RES) - copy $(PERLEXE) $(WPERLEXE) - $(MINIPERL) -I..\lib bin\exetype.pl $(WPERLEXE) WINDOWS - copy splittree.pl .. - $(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR) - -$(DYNALOADER).c: $(MINIPERL) $(EXTDIR)\DynaLoader\dl_win32.xs $(CONFIGPM) - if not exist $(AUTODIR) mkdir $(AUTODIR) - cd $(EXTDIR)\$(*B) - ..\$(MINIPERL) -I..\..\lib $(*B)_pm.PL - ..\$(MINIPERL) -I..\..\lib XSLoader_pm.PL - cd ..\..\win32 - $(XCOPY) $(EXTDIR)\$(*B)\$(*B).pm $(LIBDIR)\$(NULL) - $(XCOPY) $(EXTDIR)\$(*B)\XSLoader.pm $(LIBDIR)\$(NULL) - cd $(EXTDIR)\$(*B) - $(XSUBPP) dl_win32.xs > $(*B).c - cd ..\..\win32 - -$(EXTDIR)\DynaLoader\dl_win32.xs: dl_win32.xs - copy dl_win32.xs $(EXTDIR)\DynaLoader\dl_win32.xs - -$(DUMPER_DLL): $(PERLEXE) $(DUMPER).xs - cd $(EXTDIR)\Data\$(*B) - ..\..\..\miniperl -I..\..\..\lib Makefile.PL INSTALLDIRS=perl - $(MAKE) - cd ..\..\..\win32 - -$(DPROF_DLL): $(PERLEXE) $(DPROF).xs - cd $(EXTDIR)\Devel\$(*B) - ..\..\..\miniperl -I..\..\..\lib Makefile.PL INSTALLDIRS=perl - $(MAKE) - cd ..\..\..\win32 - -$(GLOB_DLL): $(PERLEXE) $(GLOB).xs - cd $(EXTDIR)\File\$(*B) - ..\..\..\miniperl -I..\..\..\lib Makefile.PL INSTALLDIRS=perl - $(MAKE) - cd ..\..\..\win32 - -$(PEEK_DLL): $(PERLEXE) $(PEEK).xs - cd $(EXTDIR)\Devel\$(*B) - ..\..\..\miniperl -I..\..\..\lib Makefile.PL INSTALLDIRS=perl - $(MAKE) - cd ..\..\..\win32 - -$(RE_DLL): $(PERLEXE) $(RE).xs - cd $(EXTDIR)\$(*B) - ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl - $(MAKE) - cd ..\..\win32 - -$(B_DLL): $(PERLEXE) $(B).xs - cd $(EXTDIR)\$(*B) - ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl - $(MAKE) - cd ..\..\win32 - -$(THREAD_DLL): $(PERLEXE) $(THREAD).xs - cd $(EXTDIR)\$(*B) - ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl - $(MAKE) - cd ..\..\win32 - -$(ATTRS_DLL): $(PERLEXE) $(ATTRS).xs - cd $(EXTDIR)\$(*B) - ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl - $(MAKE) - cd ..\..\win32 - -$(POSIX_DLL): $(PERLEXE) $(POSIX).xs - cd $(EXTDIR)\$(*B) - ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl - $(MAKE) - cd ..\..\win32 - -$(IO_DLL): $(PERLEXE) $(IO).xs - cd $(EXTDIR)\$(*B) - ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl - $(MAKE) - cd ..\..\win32 - -$(SDBM_FILE_DLL) : $(PERLEXE) $(SDBM_FILE).xs - cd $(EXTDIR)\$(*B) - ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl - $(MAKE) - cd ..\..\win32 - -$(FCNTL_DLL): $(PERLEXE) $(FCNTL).xs - cd $(EXTDIR)\$(*B) - ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl - $(MAKE) - cd ..\..\win32 - -$(OPCODE_DLL): $(PERLEXE) $(OPCODE).xs - cd $(EXTDIR)\$(*B) - ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl - $(MAKE) - cd ..\..\win32 - -$(SOCKET_DLL): $(PERLEXE) $(SOCKET).xs - cd $(EXTDIR)\$(*B) - ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl - $(MAKE) - cd ..\..\win32 - -$(HOSTNAME_DLL): $(PERLEXE) $(HOSTNAME).xs - cd $(EXTDIR)\Sys\$(*B) - ..\..\..\miniperl -I..\..\..\lib Makefile.PL INSTALLDIRS=perl - $(MAKE) - cd ..\..\..\win32 - -$(BYTELOADER_DLL): $(PERLEXE) $(BYTELOADER).xs - cd $(EXTDIR)\$(*B) - ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl - $(MAKE) - cd ..\..\win32 - -$(STORABLE_DLL): $(PERLEXE) $(STORABLE).xs - cd $(EXTDIR)\$(*B) - ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl - $(MAKE) - cd ..\..\win32 - -$(ERRNO_PM): $(PERLEXE) $(ERRNO)_pm.PL - cd $(EXTDIR)\$(*B) - ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl - $(MAKE) - cd ..\..\win32 - -doc: $(PERLEXE) - $(PERLEXE) -I..\lib ..\installhtml --podroot=.. --htmldir=./html \ - --podpath=pod:lib:ext:utils --htmlroot="file://$(INST_HTML::=|)" \ - --libpod=perlfunc:perlguts:perlvar:perlrun:perlop --recurse - -utils: $(PERLEXE) $(X2P) - cd ..\utils - $(MAKE) PERL=$(MINIPERL) - cd ..\pod - copy ..\README.amiga .\perlamiga.pod - copy ..\README.cygwin .\perlcygwin.pod - copy ..\README.dos .\perldos.pod - copy ..\README.hpux .\perlhpux.pod - copy ..\README.machten .\perlmachten.pod - copy ..\README.os2 .\perlos2.pod - copy ..\vms\perlvms.pod .\perlvms.pod - copy ..\README.win32 .\perlwin32.pod - $(MAKE) -f ..\win32\pod.mak converters - cd ..\lib - $(PERLEXE) lib_pm.PL - cd ..\win32 - $(PERLEXE) $(PL2BAT) $(UTILS) - -distclean: clean - -del /f $(MINIPERL) $(PERLEXE) $(PERLDLL) $(GLOBEXE) \ - $(PERLIMPLIB) ..\miniperl.lib $(MINIMOD) - -del /f *.def *.map - -del /f $(EXTENSION_DLL) $(EXTENSION_PM) - -del /f $(EXTENSION_C) $(DYNALOADER).c $(ERRNO).pm - -del /f $(EXTDIR)\DynaLoader\dl_win32.xs - -del /f $(LIBDIR)\.exists $(LIBDIR)\attrs.pm $(LIBDIR)\DynaLoader.pm - -del /f $(LIBDIR)\XSLoader.pm - -del /f $(LIBDIR)\Fcntl.pm $(LIBDIR)\IO.pm $(LIBDIR)\Opcode.pm - -del /f $(LIBDIR)\ops.pm $(LIBDIR)\Safe.pm $(LIBDIR)\Thread.pm - -del /f $(LIBDIR)\SDBM_File.pm $(LIBDIR)\Socket.pm $(LIBDIR)\POSIX.pm - -del /f $(LIBDIR)\B.pm $(LIBDIR)\O.pm $(LIBDIR)\re.pm - -del /f $(LIBDIR)\Data\Dumper.pm $(LIBDIR)\ByteLoader.pm - -del /f $(LIBDIR)\Devel\Peek.pm $(LIBDIR)\Devel\DProf.pm - -del /f $(LIBDIR)\File\Glob.pm - -del /f $(LIBDIR)\Storable.pm - -if exist $(LIBDIR)\IO rmdir /s /q $(LIBDIR)\IO || rmdir /s $(LIBDIR)\IO - -if exist $(LIBDIR)\Thread rmdir /s /q $(LIBDIR)\Thread || rmdir /s $(LIBDIR)\Thread - -if exist $(LIBDIR)\B rmdir /s /q $(LIBDIR)\B || rmdir /s $(LIBDIR)\B - -if exist $(LIBDIR)\Data rmdir /s /q $(LIBDIR)\Data || rmdir /s $(LIBDIR)\Data - -del /f $(PODDIR)\*.html - -del /f $(PODDIR)\*.bat - cd ..\utils - -del /f h2ph splain perlbug pl2pm c2ph h2xs perldoc dprofpp - -del /f *.bat - cd ..\win32 - cd ..\x2p - -del /f find2perl s2p - -del /f *.bat - cd ..\win32 - -del /f ..\config.sh ..\splittree.pl perlmain.c dlutils.c config.h.new - -del /f $(CONFIGPM) - -del /f bin\*.bat - cd $(EXTDIR) - -del /s *.lib *.def *.map *.pdb *.bs Makefile *$(o) pm_to_blib - cd ..\win32 - -if exist $(AUTODIR) rmdir /s /q $(AUTODIR) || rmdir /s $(AUTODIR) - -if exist $(COREDIR) rmdir /s /q $(COREDIR) || rmdir /s $(COREDIR) - -install : all installbare installhtml - -installbare : utils - $(PERLEXE) ..\installperl - if exist $(WPERLEXE) $(XCOPY) $(WPERLEXE) $(INST_BIN)\*.* - $(XCOPY) $(GLOBEXE) $(INST_BIN)\*.* - $(XCOPY) bin\*.bat $(INST_SCRIPT)\*.* - -installhtml : doc - $(RCOPY) html\*.* $(INST_HTML)\*.* - -inst_lib : $(CONFIGPM) - copy splittree.pl .. - $(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR) - $(RCOPY) ..\lib $(INST_LIB)\*.* - -minitest : $(MINIPERL) $(GLOBEXE) $(CONFIGPM) utils - $(XCOPY) $(MINIPERL) ..\t\perl.exe - $(XCOPY) $(GLOBEXE) ..\t\$(NULL) - attrib -r ..\t\*.* - copy test ..\t - cd ..\t - $(MINIPERL) -I..\lib test base/*.t comp/*.t cmd/*.t io/*.t op/*.t pragma/*.t - cd ..\win32 - -test-prep : all utils - $(XCOPY) $(PERLEXE) ..\t\$(NULL) - $(XCOPY) $(PERLDLL) ..\t\$(NULL) - $(XCOPY) $(GLOBEXE) ..\t\$(NULL) - -test : test-prep - cd ..\t - $(PERLEXE) -I..\lib harness - cd ..\win32 - -test-notty : test-prep - set PERL_SKIP_TTY_TEST=1 - cd ..\t - $(PERLEXE) -I..\lib harness - cd ..\win32 - -test-wide : test-prep - set HARNESS_PERL_SWITCHES=-C - cd ..\t - $(PERLEXE) -I..\lib harness - cd ..\win32 - -test-wide-notty : test-prep - set PERL_SKIP_TTY_TEST=1 - set HARNESS_PERL_SWITCHES=-C - cd ..\t - $(PERLEXE) -I..\lib harness - cd ..\win32 - -clean : - -@erase miniperlmain$(o) - -@erase $(MINIPERL) - -@erase perlglob$(o) - -@erase perlmain$(o) - -@erase config.w32 - -@erase /f config.h - -@erase $(GLOBEXE) - -@erase $(PERLEXE) - -@erase $(WPERLEXE) - -@erase $(PERLDLL) - -@erase $(CORE_OBJ) - -if exist $(MINIDIR) rmdir /s /q $(MINIDIR) || rmdir /s $(MINIDIR) - -@erase $(WIN32_OBJ) - -@erase $(DLL_OBJ) - -@erase $(X2P_OBJ) - -@erase ..\*$(o) ..\*.lib ..\*.exp *$(o) *.lib *.exp *.res - -@erase ..\t\*.exe ..\t\*.dll ..\t\*.bat - -@erase ..\x2p\*.exe ..\x2p\*.bat - -@erase *.ilk - -@erase *.pdb - -# Handy way to run perlbug -ok without having to install and run the -# installed perlbug. We don't re-run the tests here - we trust the user. -# Please *don't* use this unless all tests pass. -# If you want to report test failures, use "nmake nok" instead. -ok: utils - $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)" - -okfile: utils - $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)" -F perl.ok - -nok: utils - $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)" - -nokfile: utils - $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)" -F perl.nok +# +# Makefile to build perl on Windows NT using Microsoft NMAKE. +# +# This is set up to build a perl.exe that runs off a shared library +# (perl56.dll). Also makes individual DLLs for the XS extensions. +# + +## +## Make sure you read README.win32 *before* you mess with anything here! +## + +## +## Build configuration. Edit the values below to suit your needs. +## + +# +# Set these to wherever you want "nmake install" to put your +# newly built perl. +# +INST_DRV = c: +INST_TOP = $(INST_DRV)\perl + +# +# Comment this out if you DON'T want your perl installation to be versioned. +# This means that the new installation will overwrite any files from the +# old installation at the same INST_TOP location. Leaving it enabled is +# the safest route, as perl adds the extra version directory to all the +# locations it installs files to. If you disable it, an alternative +# versioned installation can be obtained by setting INST_TOP above to a +# path that includes an arbitrary version string. +# +INST_VER = \5.6.0 + +# +# Comment this out if you DON'T want your perl installation to have +# architecture specific components. This means that architecture- +# specific files will be installed along with the architecture-neutral +# files. Leaving it enabled is safer and more flexible, in case you +# want to build multiple flavors of perl and install them together in +# the same location. Commenting it out gives you a simpler +# installation that is easier to understand for beginners. +# +INST_ARCH = \$(ARCHNAME) + +# +# uncomment to enable multiple interpreters. This is need for fork() +# emulation. +# +#USE_MULTI = define + +# +# Beginnings of interpreter cloning/threads; still very incomplete. +# This should be enabled to get the fork() emulation. This needs +# USE_MULTI as well. +# +#USE_ITHREADS = define + +# +# uncomment to enable the implicit "host" layer for all system calls +# made by perl. This needs USE_MULTI above. This is also needed to +# get fork(). +# +#USE_IMP_SYS = define + +# +# WARNING! This option is deprecated and will eventually go away (enable +# USE_ITHREADS instead). +# +# uncomment to enable threads-capabilities. This is incompatible with +# USE_ITHREADS, and is only here for people who may have come to rely +# on the experimental Thread support that was in 5.005. +# +#USE_5005THREADS= define + +# +# WARNING! This option is deprecated and will eventually go away (enable +# USE_MULTI instead). +# +# uncomment next line if you want to use the PERL_OBJECT build option. +# DO NOT ENABLE unless you have legacy code that relies on the C++ +# CPerlObj class that was available in 5.005. This cannot be enabled +# if you ask for USE_5005THREADS above. +# +#USE_OBJECT = define + +# +# uncomment one of the following lines if you are using either +# Visual C++ 2.x or Visual C++ 6.x (aka Visual Studio 98) +# +#CCTYPE = MSVC20 +#CCTYPE = MSVC60 + +# +# uncomment next line if you want debug version of perl (big,slow) +# +#CFG = Debug + +# +# uncomment to enable use of PerlCRT.DLL when using the Visual C compiler. +# It has patches that fix known bugs in older versions of MSVCRT.DLL. +# This currently requires VC 5.0 with Service Pack 3 or later. +# Get it from CPAN at http://www.perl.com/CPAN/authors/id/D/DO/DOUGL/ +# and follow the directions in the package to install. +# +# Not recommended if you have VC 6.x and you're not running Windows 9x. +# +#USE_PERLCRT = define + +# +# uncomment to enable linking with setargv.obj under the Visual C +# compiler. Setting this options enables perl to expand wildcards in +# arguments, but it may be harder to use alternate methods like +# File::DosGlob that are more powerful. This option is supported only with +# Visual C. +# +#USE_SETARGV = define + +# +# if you have the source for des_fcrypt(), uncomment this and make sure the +# file exists (see README.win32). File should be located in the same +# directory as this file. +# +#CRYPT_SRC = fcrypt.c + +# +# if you didn't set CRYPT_SRC and if you have des_fcrypt() available in a +# library, uncomment this, and make sure the library exists (see README.win32) +# Specify the full pathname of the library. +# +#CRYPT_LIB = fcrypt.lib + +# +# set this if you wish to use perl's malloc +# WARNING: Turning this on/off WILL break binary compatibility with extensions +# you may have compiled with/without it. Be prepared to recompile all +# extensions if you change the default. Currently, this cannot be enabled +# if you ask for USE_IMP_SYS above. +# +#PERL_MALLOC = define + +# +# set the install locations of the compiler include/libraries +# Running VCVARS32.BAT is *required* when using Visual C. +# Some versions of Visual C don't define MSVCDIR in the environment, +# so you may have to set CCHOME explicitly (spaces in the path name should +# not be quoted) +# +#CCHOME = f:\msvc20 +CCHOME = $(MSVCDIR) +CCINCDIR = $(CCHOME)\include +CCLIBDIR = $(CCHOME)\lib + +# +# Additional compiler flags can be specified here. +# + +# +# This should normally be disabled. Adding -DPERL_POLLUTE enables support +# for old symbols by default, at the expense of extreme pollution. You most +# probably just want to build modules that won't compile with +# perl Makefile.PL POLLUTE=1 +# instead of enabling this. Please report such modules to the respective +# authors. +# +#BUILDOPT = $(BUILDOPT) -DPERL_POLLUTE + +# +# This should normally be disabled. Enabling it will disable the File::Glob +# implementation of CORE::glob. +# +#BUILDOPT = $(BUILDOPT) -DPERL_EXTERNAL_GLOB + +# +# This should normally be disabled. Enabling it causes perl to read scripts +# in text mode (which is the 5.005 behavior) and will break ByteLoader. +#BUILDOPT = $(BUILDOPT) -DPERL_TEXTMODE_SCRIPTS + +# +# specify semicolon-separated list of extra directories that modules will +# look for libraries (spaces in path names need not be quoted) +# +EXTRALIBDIRS = + +# +# set this to your email address (perl will guess a value from +# from your loginname and your hostname, which may not be right) +# +#EMAIL = + +## +## Build configuration ends. +## + +##################### CHANGE THESE ONLY IF YOU MUST ##################### + +!IF "$(CRYPT_SRC)$(CRYPT_LIB)" == "" +D_CRYPT = undef +!ELSE +D_CRYPT = define +CRYPT_FLAG = -DHAVE_DES_FCRYPT +!ENDIF + +!IF "$(USE_OBJECT)" == "define" +PERL_MALLOC = undef +USE_5005THREADS = undef +USE_MULTI = undef +USE_IMP_SYS = define +!ENDIF + +!IF "$(PERL_MALLOC)" == "" +PERL_MALLOC = undef +!ENDIF + +!IF "$(USE_5005THREADS)" == "" +USE_5005THREADS = undef +!ENDIF + +!IF "$(USE_5005THREADS)" == "define" +USE_ITHREADS = undef +!ENDIF + +!IF "$(USE_IMP_SYS)" == "define" +PERL_MALLOC = undef +!ENDIF + +!IF "$(USE_MULTI)" == "" +USE_MULTI = undef +!ENDIF + +!IF "$(USE_OBJECT)" == "" +USE_OBJECT = undef +!ENDIF + +!IF "$(USE_ITHREADS)" == "" +USE_ITHREADS = undef +!ENDIF + +!IF "$(USE_IMP_SYS)" == "" +USE_IMP_SYS = undef +!ENDIF + +!IF "$(USE_PERLCRT)" == "" +USE_PERLCRT = undef +!ENDIF + +!IF "$(USE_IMP_SYS)$(USE_MULTI)$(USE_5005THREADS)$(USE_OBJECT)" == "defineundefundefundef" +USE_MULTI = define +!ENDIF + +!IF "$(USE_ITHREADS)$(USE_MULTI)$(USE_OBJECT)" == "defineundefundef" +USE_MULTI = define +USE_5005THREADS = undef +!ENDIF + +!IF "$(USE_MULTI)$(USE_5005THREADS)$(USE_OBJECT)" != "undefundefundef" +BUILDOPT = $(BUILDOPT) -DPERL_IMPLICIT_CONTEXT +!ENDIF + +!IF "$(USE_IMP_SYS)" != "undef" +BUILDOPT = $(BUILDOPT) -DPERL_IMPLICIT_SYS +!ENDIF + +!IF "$(PROCESSOR_ARCHITECTURE)" == "" +PROCESSOR_ARCHITECTURE = x86 +!ENDIF + +!IF "$(USE_OBJECT)" == "define" +ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-object +!ELSE +!IF "$(USE_5005THREADS)" == "define" +ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-thread +!ELSE +!IF "$(USE_MULTI)" == "define" +ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-multi +!ELSE +ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE) +!ENDIF +!ENDIF +!ENDIF + +!IF "$(USE_ITHREADS)" == "define" +ARCHNAME = $(ARCHNAME)-thread +!ENDIF + +# Visual Studio 98 specific +!IF "$(CCTYPE)" == "MSVC60" + +# VC 6.0 can load the socket dll on demand. Makes the test suite +# run in about 10% less time. +DELAYLOAD = -DELAYLOAD:wsock32.dll -DELAYLOAD:shell32.dll delayimp.lib + +# VC 6.0 seems capable of compiling perl correctly with optimizations +# enabled. Anything earlier fails tests. +!IF "$(CFG)" == "" +CFG = Optimize +!ENDIF +!ENDIF + +ARCHDIR = ..\lib\$(ARCHNAME) +COREDIR = ..\lib\CORE +AUTODIR = ..\lib\auto +LIBDIR = ..\lib +EXTDIR = ..\ext +PODDIR = ..\pod +EXTUTILSDIR = $(LIBDIR)\ExtUtils + +# +INST_SCRIPT = $(INST_TOP)$(INST_VER)\bin +INST_BIN = $(INST_SCRIPT)$(INST_ARCH) +INST_LIB = $(INST_TOP)$(INST_VER)\lib +INST_ARCHLIB = $(INST_LIB)$(INST_ARCH) +INST_COREDIR = $(INST_ARCHLIB)\CORE +INST_POD = $(INST_LIB)\pod +INST_HTML = $(INST_POD)\html + +# +# Programs to compile, build .lib files and link +# + +CC = cl +LINK32 = link +LIB32 = $(LINK32) -lib +RSC = rc + +# +# Options +# + +INCLUDES = -I$(COREDIR) -I.\include -I. -I.. +#PCHFLAGS = -Fpc:\temp\vcmoduls.pch -YX +DEFINES = -DWIN32 -D_CONSOLE -DNO_STRICT $(CRYPT_FLAG) +LOCDEFS = -DPERLDLL -DPERL_CORE +SUBSYS = console +CXX_FLAG = -TP -GX + +!IF "$(USE_PERLCRT)" != "define" +LIBC = msvcrt.lib +!ELSE +LIBC = PerlCRT.lib +!ENDIF + +PERLEXE_RES = +PERLDLL_RES = + +!IF "$(CFG)" == "Debug" +! IF "$(CCTYPE)" == "MSVC20" +OPTIMIZE = -Od -MD -Z7 -DDEBUGGING +! ELSE +OPTIMIZE = -Od -MD -Zi -DDEBUGGING +! ENDIF +LINK_DBG = -debug -pdb:none +!ELSE +! IF "$(CFG)" == "Optimize" +# -O1 yields smaller code, which turns out to be faster than -O2 +#OPTIMIZE = -O2 -MD -DNDEBUG +OPTIMIZE = -O1 -MD -DNDEBUG +! ELSE +OPTIMIZE = -Od -MD -DNDEBUG +! ENDIF +LINK_DBG = -release +!ENDIF + +!IF "$(USE_OBJECT)" == "define" +OPTIMIZE = $(OPTIMIZE) $(CXX_FLAG) +BUILDOPT = $(BUILDOPT) -DPERL_OBJECT +!ENDIF + +!IF "$(USE_PERLCRT)" != "define" +BUILDOPT = $(BUILDOPT) -DPERL_MSVCRT_READFIX +!ENDIF + +LIBBASEFILES = $(CRYPT_LIB) \ + oldnames.lib kernel32.lib user32.lib gdi32.lib winspool.lib \ + comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib \ + netapi32.lib uuid.lib wsock32.lib mpr.lib winmm.lib \ + version.lib odbc32.lib odbccp32.lib + +# we add LIBC here, since we may be using PerlCRT.dll +LIBFILES = $(LIBBASEFILES) $(LIBC) + +CFLAGS = -nologo -Gf -W3 $(INCLUDES) $(DEFINES) $(LOCDEFS) \ + $(PCHFLAGS) $(OPTIMIZE) +LINK_FLAGS = -nologo -nodefaultlib $(LINK_DBG) \ + -libpath:"$(INST_COREDIR)" \ + -machine:$(PROCESSOR_ARCHITECTURE) +OBJOUT_FLAG = -Fo +EXEOUT_FLAG = -Fe + +CFLAGS_O = $(CFLAGS) $(BUILDOPT) + +#################### do not edit below this line ####################### +############# NO USER-SERVICEABLE PARTS BEYOND THIS POINT ############## + +o = .obj + +# +# Rules +# + +.SUFFIXES : .c $(o) .dll .lib .exe .rc .res + +.c$(o): + $(CC) -c -I$( ..\config.sh + +# this target is for when changes to the main config.sh happen +# edit config.{b,v,g}c and make this target once for each supported +# compiler (e.g. `dmake CCTYPE=BORLAND regen_config_h`) +regen_config_h: + perl config_sh.PL $(CFG_VARS) $(CFGSH_TMPL) > ..\config.sh + cd .. + -del /f perl.exe + perl configpm + cd win32 + -del /f $(CFGH_TMPL) + -mkdir $(COREDIR) + -perl -I..\lib config_h.PL "INST_VER=$(INST_VER)" + rename config.h $(CFGH_TMPL) + +$(CONFIGPM) : $(MINIPERL) ..\config.sh config_h.PL ..\minimod.pl + cd .. && miniperl configpm + if exist lib\* $(RCOPY) lib\*.* ..\lib\$(NULL) + $(XCOPY) ..\*.h $(COREDIR)\*.* + $(XCOPY) *.h $(COREDIR)\*.* + $(XCOPY) ..\ext\re\re.pm $(LIBDIR)\*.* + $(RCOPY) include $(COREDIR)\*.* + $(MINIPERL) -I..\lib config_h.PL "INST_VER=$(INST_VER)" \ + || $(MAKE) /$(MAKEFLAGS) $(CONFIGPM) + +$(MINIPERL) : $(MINIDIR) $(MINI_OBJ) + $(LINK32) -subsystem:console -out:$@ @<< + $(LINK_FLAGS) $(LIBFILES) $(MINI_OBJ) +<< + +$(MINIDIR) : + if not exist "$(MINIDIR)" mkdir "$(MINIDIR)" + +$(MINICORE_OBJ) : $(CORE_NOCFG_H) + $(CC) -c $(CFLAGS) -DPERL_EXTERNAL_GLOB $(OBJOUT_FLAG)$@ ..\$(*F).c + +$(MINIWIN32_OBJ) : $(CORE_NOCFG_H) + $(CC) -c $(CFLAGS) $(OBJOUT_FLAG)$@ $(*F).c + +# -DPERL_IMPLICIT_SYS needs C++ for perllib.c +# This is the only file that depends on perlhost.h, vmem.h, and vdir.h +!IF "$(USE_IMP_SYS)$(USE_OBJECT)" == "defineundef" +perllib$(o) : perllib.c .\perlhost.h .\vdir.h .\vmem.h + $(CC) -c -I. $(CFLAGS_O) $(CXX_FLAG) $(OBJOUT_FLAG)$@ perllib.c +!ENDIF + +# 1. we don't want to rebuild miniperl.exe when config.h changes +# 2. we don't want to rebuild miniperl.exe with non-default config.h +$(MINI_OBJ) : $(CORE_NOCFG_H) + +$(WIN32_OBJ) : $(CORE_H) +$(CORE_OBJ) : $(CORE_H) +$(DLL_OBJ) : $(CORE_H) +$(X2P_OBJ) : $(CORE_H) + +perldll.def : $(MINIPERL) $(CONFIGPM) ..\global.sym ..\pp.sym ..\makedef.pl + $(MINIPERL) -w ..\makedef.pl PLATFORM=win32 $(OPTIMIZE) $(DEFINES) $(BUILDOPT) \ + CCTYPE=$(CCTYPE) > perldll.def + +$(PERLDLL): perldll.def $(PERLDLL_OBJ) $(PERLDLL_RES) + $(LINK32) -dll -def:perldll.def -base:0x28000000 -out:$@ @<< + $(LINK_FLAGS) $(DELAYLOAD) $(LIBFILES) $(PERLDLL_OBJ) $(PERLDLL_RES) +<< + $(XCOPY) $(PERLIMPLIB) $(COREDIR) + +$(MINIMOD) : $(MINIPERL) ..\minimod.pl + cd .. && miniperl minimod.pl > lib\ExtUtils\Miniperl.pm + +..\x2p\a2p$(o) : ..\x2p\a2p.c + $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\a2p.c + +..\x2p\hash$(o) : ..\x2p\hash.c + $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\hash.c + +..\x2p\str$(o) : ..\x2p\str.c + $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\str.c + +..\x2p\util$(o) : ..\x2p\util.c + $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\util.c + +..\x2p\walk$(o) : ..\x2p\walk.c + $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\walk.c + +$(X2P) : $(MINIPERL) $(X2P_OBJ) + $(MINIPERL) ..\x2p\find2perl.PL + $(MINIPERL) ..\x2p\s2p.PL + $(LINK32) -subsystem:console -out:$@ @<< + $(LINK_FLAGS) $(LIBFILES) $(X2P_OBJ) +<< + +perlmain.c : runperl.c + copy runperl.c perlmain.c + +perlmain$(o) : perlmain.c + $(CC) $(CFLAGS_O) -UPERLDLL $(OBJOUT_FLAG)$@ -c perlmain.c + +$(PERLEXE): $(PERLDLL) $(CONFIGPM) $(PERLEXE_OBJ) $(PERLEXE_RES) + $(LINK32) -subsystem:console -out:$@ -stack:0x1000000 $(LINK_FLAGS) \ + $(LIBFILES) $(PERLEXE_OBJ) $(SETARGV_OBJ) $(PERLIMPLIB) $(PERLEXE_RES) + copy $(PERLEXE) $(WPERLEXE) + $(MINIPERL) -I..\lib bin\exetype.pl $(WPERLEXE) WINDOWS + copy splittree.pl .. + $(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR) + +$(DYNALOADER).c: $(MINIPERL) $(EXTDIR)\DynaLoader\dl_win32.xs $(CONFIGPM) + if not exist $(AUTODIR) mkdir $(AUTODIR) + cd $(EXTDIR)\$(*B) + ..\$(MINIPERL) -I..\..\lib $(*B)_pm.PL + ..\$(MINIPERL) -I..\..\lib XSLoader_pm.PL + cd ..\..\win32 + $(XCOPY) $(EXTDIR)\$(*B)\$(*B).pm $(LIBDIR)\$(NULL) + $(XCOPY) $(EXTDIR)\$(*B)\XSLoader.pm $(LIBDIR)\$(NULL) + cd $(EXTDIR)\$(*B) + $(XSUBPP) dl_win32.xs > $(*B).c + cd ..\..\win32 + +$(EXTDIR)\DynaLoader\dl_win32.xs: dl_win32.xs + copy dl_win32.xs $(EXTDIR)\DynaLoader\dl_win32.xs + +$(DUMPER_DLL): $(PERLEXE) $(DUMPER).xs + cd $(EXTDIR)\Data\$(*B) + ..\..\..\miniperl -I..\..\..\lib Makefile.PL INSTALLDIRS=perl + $(MAKE) + cd ..\..\..\win32 + +$(DPROF_DLL): $(PERLEXE) $(DPROF).xs + cd $(EXTDIR)\Devel\$(*B) + ..\..\..\miniperl -I..\..\..\lib Makefile.PL INSTALLDIRS=perl + $(MAKE) + cd ..\..\..\win32 + +$(GLOB_DLL): $(PERLEXE) $(GLOB).xs + cd $(EXTDIR)\File\$(*B) + ..\..\..\miniperl -I..\..\..\lib Makefile.PL INSTALLDIRS=perl + $(MAKE) + cd ..\..\..\win32 + +$(PEEK_DLL): $(PERLEXE) $(PEEK).xs + cd $(EXTDIR)\Devel\$(*B) + ..\..\..\miniperl -I..\..\..\lib Makefile.PL INSTALLDIRS=perl + $(MAKE) + cd ..\..\..\win32 + +$(RE_DLL): $(PERLEXE) $(RE).xs + cd $(EXTDIR)\$(*B) + ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl + $(MAKE) + cd ..\..\win32 + +$(B_DLL): $(PERLEXE) $(B).xs + cd $(EXTDIR)\$(*B) + ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl + $(MAKE) + cd ..\..\win32 + +$(THREAD_DLL): $(PERLEXE) $(THREAD).xs + cd $(EXTDIR)\$(*B) + ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl + $(MAKE) + cd ..\..\win32 + +$(ATTRS_DLL): $(PERLEXE) $(ATTRS).xs + cd $(EXTDIR)\$(*B) + ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl + $(MAKE) + cd ..\..\win32 + +$(POSIX_DLL): $(PERLEXE) $(POSIX).xs + cd $(EXTDIR)\$(*B) + ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl + $(MAKE) + cd ..\..\win32 + +$(IO_DLL): $(PERLEXE) $(IO).xs + cd $(EXTDIR)\$(*B) + ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl + $(MAKE) + cd ..\..\win32 + +$(SDBM_FILE_DLL) : $(PERLEXE) $(SDBM_FILE).xs + cd $(EXTDIR)\$(*B) + ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl + $(MAKE) + cd ..\..\win32 + +$(FCNTL_DLL): $(PERLEXE) $(FCNTL).xs + cd $(EXTDIR)\$(*B) + ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl + $(MAKE) + cd ..\..\win32 + +$(OPCODE_DLL): $(PERLEXE) $(OPCODE).xs + cd $(EXTDIR)\$(*B) + ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl + $(MAKE) + cd ..\..\win32 + +$(SOCKET_DLL): $(PERLEXE) $(SOCKET).xs + cd $(EXTDIR)\$(*B) + ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl + $(MAKE) + cd ..\..\win32 + +$(HOSTNAME_DLL): $(PERLEXE) $(HOSTNAME).xs + cd $(EXTDIR)\Sys\$(*B) + ..\..\..\miniperl -I..\..\..\lib Makefile.PL INSTALLDIRS=perl + $(MAKE) + cd ..\..\..\win32 + +$(BYTELOADER_DLL): $(PERLEXE) $(BYTELOADER).xs + cd $(EXTDIR)\$(*B) + ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl + $(MAKE) + cd ..\..\win32 + +$(STORABLE_DLL): $(PERLEXE) $(STORABLE).xs + cd $(EXTDIR)\$(*B) + ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl + $(MAKE) + cd ..\..\win32 + +$(ERRNO_PM): $(PERLEXE) $(ERRNO)_pm.PL + cd $(EXTDIR)\$(*B) + ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl + $(MAKE) + cd ..\..\win32 + +doc: $(PERLEXE) + $(PERLEXE) -I..\lib ..\installhtml --podroot=.. --htmldir=./html \ + --podpath=pod:lib:ext:utils --htmlroot="file://$(INST_HTML::=|)" \ + --libpod=perlfunc:perlguts:perlvar:perlrun:perlop --recurse + +utils: $(PERLEXE) $(X2P) + cd ..\utils + $(MAKE) PERL=$(MINIPERL) + cd ..\pod + copy ..\README.amiga .\perlamiga.pod + copy ..\README.cygwin .\perlcygwin.pod + copy ..\README.dos .\perldos.pod + copy ..\README.hpux .\perlhpux.pod + copy ..\README.machten .\perlmachten.pod + copy ..\README.os2 .\perlos2.pod + copy ..\vms\perlvms.pod .\perlvms.pod + copy ..\README.win32 .\perlwin32.pod + $(MAKE) -f ..\win32\pod.mak converters + cd ..\lib + $(PERLEXE) lib_pm.PL + cd ..\win32 + $(PERLEXE) $(PL2BAT) $(UTILS) + +distclean: clean + -del /f $(MINIPERL) $(PERLEXE) $(PERLDLL) $(GLOBEXE) \ + $(PERLIMPLIB) ..\miniperl.lib $(MINIMOD) + -del /f *.def *.map + -del /f $(EXTENSION_DLL) $(EXTENSION_PM) + -del /f $(EXTENSION_C) $(DYNALOADER).c $(ERRNO).pm + -del /f $(EXTDIR)\DynaLoader\dl_win32.xs + -del /f $(LIBDIR)\.exists $(LIBDIR)\attrs.pm $(LIBDIR)\DynaLoader.pm + -del /f $(LIBDIR)\XSLoader.pm + -del /f $(LIBDIR)\Fcntl.pm $(LIBDIR)\IO.pm $(LIBDIR)\Opcode.pm + -del /f $(LIBDIR)\ops.pm $(LIBDIR)\Safe.pm $(LIBDIR)\Thread.pm + -del /f $(LIBDIR)\SDBM_File.pm $(LIBDIR)\Socket.pm $(LIBDIR)\POSIX.pm + -del /f $(LIBDIR)\B.pm $(LIBDIR)\O.pm $(LIBDIR)\re.pm + -del /f $(LIBDIR)\Data\Dumper.pm $(LIBDIR)\ByteLoader.pm + -del /f $(LIBDIR)\Devel\Peek.pm $(LIBDIR)\Devel\DProf.pm + -del /f $(LIBDIR)\File\Glob.pm + -del /f $(LIBDIR)\Storable.pm + -if exist $(LIBDIR)\IO rmdir /s /q $(LIBDIR)\IO || rmdir /s $(LIBDIR)\IO + -if exist $(LIBDIR)\Thread rmdir /s /q $(LIBDIR)\Thread || rmdir /s $(LIBDIR)\Thread + -if exist $(LIBDIR)\B rmdir /s /q $(LIBDIR)\B || rmdir /s $(LIBDIR)\B + -if exist $(LIBDIR)\Data rmdir /s /q $(LIBDIR)\Data || rmdir /s $(LIBDIR)\Data + -del /f $(PODDIR)\*.html + -del /f $(PODDIR)\*.bat + cd ..\utils + -del /f h2ph splain perlbug pl2pm c2ph h2xs perldoc dprofpp + -del /f *.bat + cd ..\win32 + cd ..\x2p + -del /f find2perl s2p + -del /f *.bat + cd ..\win32 + -del /f ..\config.sh ..\splittree.pl perlmain.c dlutils.c config.h.new + -del /f $(CONFIGPM) + -del /f bin\*.bat + cd $(EXTDIR) + -del /s *.lib *.def *.map *.pdb *.bs Makefile *$(o) pm_to_blib + cd ..\win32 + -if exist $(AUTODIR) rmdir /s /q $(AUTODIR) || rmdir /s $(AUTODIR) + -if exist $(COREDIR) rmdir /s /q $(COREDIR) || rmdir /s $(COREDIR) + +install : all installbare installhtml + +installbare : utils + $(PERLEXE) ..\installperl + if exist $(WPERLEXE) $(XCOPY) $(WPERLEXE) $(INST_BIN)\*.* + $(XCOPY) $(GLOBEXE) $(INST_BIN)\*.* + $(XCOPY) bin\*.bat $(INST_SCRIPT)\*.* + +installhtml : doc + $(RCOPY) html\*.* $(INST_HTML)\*.* + +inst_lib : $(CONFIGPM) + copy splittree.pl .. + $(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR) + $(RCOPY) ..\lib $(INST_LIB)\*.* + +minitest : $(MINIPERL) $(GLOBEXE) $(CONFIGPM) utils + $(XCOPY) $(MINIPERL) ..\t\perl.exe + $(XCOPY) $(GLOBEXE) ..\t\$(NULL) + attrib -r ..\t\*.* + copy test ..\t + cd ..\t + $(MINIPERL) -I..\lib test base/*.t comp/*.t cmd/*.t io/*.t op/*.t pragma/*.t + cd ..\win32 + +test-prep : all utils + $(XCOPY) $(PERLEXE) ..\t\$(NULL) + $(XCOPY) $(PERLDLL) ..\t\$(NULL) + $(XCOPY) $(GLOBEXE) ..\t\$(NULL) + +test : test-prep + cd ..\t + $(PERLEXE) -I..\lib harness + cd ..\win32 + +test-notty : test-prep + set PERL_SKIP_TTY_TEST=1 + cd ..\t + $(PERLEXE) -I..\lib harness + cd ..\win32 + +test-wide : test-prep + set HARNESS_PERL_SWITCHES=-C + cd ..\t + $(PERLEXE) -I..\lib harness + cd ..\win32 + +test-wide-notty : test-prep + set PERL_SKIP_TTY_TEST=1 + set HARNESS_PERL_SWITCHES=-C + cd ..\t + $(PERLEXE) -I..\lib harness + cd ..\win32 + +clean : + -@erase miniperlmain$(o) + -@erase $(MINIPERL) + -@erase perlglob$(o) + -@erase perlmain$(o) + -@erase config.w32 + -@erase /f config.h + -@erase $(GLOBEXE) + -@erase $(PERLEXE) + -@erase $(WPERLEXE) + -@erase $(PERLDLL) + -@erase $(CORE_OBJ) + -if exist $(MINIDIR) rmdir /s /q $(MINIDIR) || rmdir /s $(MINIDIR) + -@erase $(WIN32_OBJ) + -@erase $(DLL_OBJ) + -@erase $(X2P_OBJ) + -@erase ..\*$(o) ..\*.lib ..\*.exp *$(o) *.lib *.exp *.res + -@erase ..\t\*.exe ..\t\*.dll ..\t\*.bat + -@erase ..\x2p\*.exe ..\x2p\*.bat + -@erase *.ilk + -@erase *.pdb + +# Handy way to run perlbug -ok without having to install and run the +# installed perlbug. We don't re-run the tests here - we trust the user. +# Please *don't* use this unless all tests pass. +# If you want to report test failures, use "nmake nok" instead. +ok: utils + $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)" + +okfile: utils + $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)" -F perl.ok + +nok: utils + $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)" + +nokfile: utils + $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)" -F perl.nok diff --git a/win32/makefile.mk b/win32/makefile.mk index 33deee5..86a2bf4 100644 --- a/win32/makefile.mk +++ b/win32/makefile.mk @@ -1,1329 +1,1329 @@ -# -# Makefile to build perl on Windows NT using DMAKE. -# Supported compilers: -# Visual C++ 2.0 thro 6.0 -# Borland C++ 5.02 -# Mingw32 with gcc-2.95.2 or better **experimental** -# -# This is set up to build a perl.exe that runs off a shared library -# (perl56.dll). Also makes individual DLLs for the XS extensions. -# - -## -## Make sure you read README.win32 *before* you mess with anything here! -## - -## -## Build configuration. Edit the values below to suit your needs. -## - -# -# Set these to wherever you want "dmake install" to put your -# newly built perl. -# -INST_DRV *= c: -INST_TOP *= $(INST_DRV)\perl - -# -# Comment this out if you DON'T want your perl installation to be versioned. -# This means that the new installation will overwrite any files from the -# old installation at the same INST_TOP location. Leaving it enabled is -# the safest route, as perl adds the extra version directory to all the -# locations it installs files to. If you disable it, an alternative -# versioned installation can be obtained by setting INST_TOP above to a -# path that includes an arbitrary version string. -# -INST_VER *= \5.6.0 - -# -# Comment this out if you DON'T want your perl installation to have -# architecture specific components. This means that architecture- -# specific files will be installed along with the architecture-neutral -# files. Leaving it enabled is safer and more flexible, in case you -# want to build multiple flavors of perl and install them together in -# the same location. Commenting it out gives you a simpler -# installation that is easier to understand for beginners. -# -INST_ARCH *= \$(ARCHNAME) - -# -# uncomment to enable multiple interpreters. This is need for fork() -# emulation. -# -#USE_MULTI *= define - -# -# Beginnings of interpreter cloning/threads; still very incomplete. -# This should be enabled to get the fork() emulation. This needs -# USE_MULTI as well. -# -#USE_ITHREADS *= define - -# -# uncomment to enable the implicit "host" layer for all system calls -# made by perl. This needs USE_MULTI above. This is also needed to -# get fork(). -# -#USE_IMP_SYS *= define - -# -# WARNING! This option is deprecated and will eventually go away (enable -# USE_ITHREADS instead). -# -# uncomment to enable threads-capabilities. This is incompatible with -# USE_ITHREADS, and is only here for people who may have come to rely -# on the experimental Thread support that was in 5.005. -# -#USE_5005THREADS *= define - -# -# WARNING! This option is deprecated and will eventually go away (enable -# USE_MULTI instead). -# -# uncomment next line if you want to use the PERL_OBJECT build option. -# DO NOT ENABLE unless you have legacy code that relies on the C++ -# CPerlObj class that was available in 5.005. This cannot be enabled -# if you ask for USE_5005THREADS above. -# -#USE_OBJECT *= define - -# -# uncomment exactly one of the following -# -# Visual C++ 2.x -#CCTYPE *= MSVC20 -# Visual C++ > 2.x and < 6.x -#CCTYPE *= MSVC -# Visual C++ >= 6.x -#CCTYPE *= MSVC60 -# Borland 5.02 or later -#CCTYPE *= BORLAND -# mingw32+gcc-2.95.2 or better -CCTYPE *= GCC - -# -# uncomment this if you are compiling under Windows 95/98 and command.com -# (not needed if you're running under 4DOS/NT 6.01 or later) -#IS_WIN95 *= define - -# -# uncomment next line if you want debug version of perl (big,slow) -# If not enabled, we automatically try to use maximum optimization -# with all compilers that are known to have a working optimizer. -# -#CFG *= Debug - -# -# uncomment to enable use of PerlCRT.DLL when using the Visual C compiler. -# It has patches that fix known bugs in older versions of MSVCRT.DLL. -# This currently requires VC 5.0 with Service Pack 3 or later. -# Get it from CPAN at http://www.perl.com/CPAN/authors/id/D/DO/DOUGL/ -# and follow the directions in the package to install. -# -# Not recommended if you have VC 6.x and you're not running Windows 9x. -# -#USE_PERLCRT *= define - -# -# uncomment to enable linking with setargv.obj under the Visual C -# compiler. Setting this options enables perl to expand wildcards in -# arguments, but it may be harder to use alternate methods like -# File::DosGlob that are more powerful. This option is supported only with -# Visual C. -# -#USE_SETARGV *= define - -# -# if you have the source for des_fcrypt(), uncomment this and make sure the -# file exists (see README.win32). File should be located in the same -# directory as this file. -# -#CRYPT_SRC *= fcrypt.c - -# -# if you didn't set CRYPT_SRC and if you have des_fcrypt() available in a -# library, uncomment this, and make sure the library exists (see README.win32) -# Specify the full pathname of the library. -# -#CRYPT_LIB *= fcrypt.lib - -# -# set this if you wish to use perl's malloc -# WARNING: Turning this on/off WILL break binary compatibility with extensions -# you may have compiled with/without it. Be prepared to recompile all -# extensions if you change the default. Currently, this cannot be enabled -# if you ask for USE_IMP_SYS above. -# -#PERL_MALLOC *= define - -# -# set the install locations of the compiler include/libraries -# Running VCVARS32.BAT is *required* when using Visual C. -# Some versions of Visual C don't define MSVCDIR in the environment, -# so you may have to set CCHOME explicitly (spaces in the path name should -# not be quoted) -# -#CCHOME *= c:\bc5 -#CCHOME *= $(MSVCDIR) -CCHOME *= c:\gcc-2.95.2-msvcrt -CCINCDIR *= $(CCHOME)\include -CCLIBDIR *= $(CCHOME)\lib - -# -# Additional compiler flags can be specified here. -# - -# -# This should normally be disabled. Adding -DPERL_POLLUTE enables support -# for old symbols by default, at the expense of extreme pollution. You most -# probably just want to build modules that won't compile with -# perl Makefile.PL POLLUTE=1 -# instead of enabling this. Please report such modules to the respective -# authors. -# -#BUILDOPT += -DPERL_POLLUTE - -# -# This should normally be disabled. Enabling it will disable the File::Glob -# implementation of CORE::glob. -# -#BUILDOPT += -DPERL_EXTERNAL_GLOB - -# -# This should normally be disabled. Enabling it causes perl to read scripts -# in text mode (which is the 5.005 behavior) and will break ByteLoader. -#BUILDOPT += -DPERL_TEXTMODE_SCRIPTS - -# -# specify semicolon-separated list of extra directories that modules will -# look for libraries (spaces in path names need not be quoted) -# -EXTRALIBDIRS *= - -# -# set this to point to cmd.exe (only needed if you use some -# alternate shell that doesn't grok cmd.exe style commands) -# -#SHELL *= g:\winnt\system32\cmd.exe - -# -# set this to your email address (perl will guess a value from -# from your loginname and your hostname, which may not be right) -# -#EMAIL *= - -## -## Build configuration ends. -## - -##################### CHANGE THESE ONLY IF YOU MUST ##################### - -.IF "$(CRYPT_SRC)$(CRYPT_LIB)" == "" -D_CRYPT = undef -.ELSE -D_CRYPT = define -CRYPT_FLAG = -DHAVE_DES_FCRYPT -.ENDIF - -.IF "$(USE_OBJECT)" == "define" -PERL_MALLOC != undef -USE_5005THREADS != undef -USE_MULTI != undef -USE_IMP_SYS != define -.ENDIF - -PERL_MALLOC *= undef - -USE_5005THREADS *= undef - -.IF "$(USE_5005THREADS)" == "define" -USE_ITHREADS != undef -.ENDIF - -.IF "$(USE_IMP_SYS)" == "define" -PERL_MALLOC != undef -.ENDIF - -USE_MULTI *= undef -USE_OBJECT *= undef -USE_ITHREADS *= undef -USE_IMP_SYS *= undef -USE_PERLCRT *= undef - -.IF "$(USE_IMP_SYS)$(USE_MULTI)$(USE_5005THREADS)$(USE_OBJECT)" == "defineundefundefundef" -USE_MULTI != define -.ENDIF - -.IF "$(USE_ITHREADS)$(USE_MULTI)$(USE_OBJECT)" == "defineundefundef" -USE_MULTI != define -USE_5005THREADS != undef -.ENDIF - -.IF "$(USE_MULTI)$(USE_5005THREADS)$(USE_OBJECT)" != "undefundefundef" -BUILDOPT += -DPERL_IMPLICIT_CONTEXT -.ENDIF - -.IF "$(USE_IMP_SYS)" != "undef" -BUILDOPT += -DPERL_IMPLICIT_SYS -.ENDIF - -.IMPORT .IGNORE : PROCESSOR_ARCHITECTURE - -PROCESSOR_ARCHITECTURE *= x86 - -.IF "$(USE_OBJECT)" == "define" -ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-object -.ELIF "$(USE_5005THREADS)" == "define" -ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-thread -.ELIF "$(USE_MULTI)" == "define" -ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-multi -.ELSE -ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE) -.ENDIF - -.IF "$(USE_ITHREADS)" == "define" -ARCHNAME !:= $(ARCHNAME)-thread -.ENDIF - -# Visual Studio 98 specific -.IF "$(CCTYPE)" == "MSVC60" - -# VC 6.0 can load the socket dll on demand. Makes the test suite -# run in about 10% less time. -DELAYLOAD *= -DELAYLOAD:wsock32.dll -DELAYLOAD:shell32.dll delayimp.lib - -# VC 6.0 seems capable of compiling perl correctly with optimizations -# enabled. Anything earlier fails tests. -CFG *= Optimize -.ENDIF - -ARCHDIR = ..\lib\$(ARCHNAME) -COREDIR = ..\lib\CORE -AUTODIR = ..\lib\auto -LIBDIR = ..\lib -EXTDIR = ..\ext -PODDIR = ..\pod -EXTUTILSDIR = $(LIBDIR)\ExtUtils - -# -INST_SCRIPT = $(INST_TOP)$(INST_VER)\bin -INST_BIN = $(INST_SCRIPT)$(INST_ARCH) -INST_LIB = $(INST_TOP)$(INST_VER)\lib -INST_ARCHLIB = $(INST_LIB)$(INST_ARCH) -INST_COREDIR = $(INST_ARCHLIB)\CORE -INST_POD = $(INST_LIB)\pod -INST_HTML = $(INST_POD)\html - -# -# Programs to compile, build .lib files and link -# - -.USESHELL : - -.IF "$(CCTYPE)" == "BORLAND" - -CC = bcc32 -LINK32 = tlink32 -LIB32 = tlib /P128 -IMPLIB = implib -c -RSC = rc - -# -# Options -# -INCLUDES = -I$(COREDIR) -I.\include -I. -I.. -I"$(CCINCDIR)" -#PCHFLAGS = -H -Hc -H=c:\temp\bcmoduls.pch -DEFINES = -DWIN32 $(CRYPT_FLAG) -LOCDEFS = -DPERLDLL -DPERL_CORE -SUBSYS = console -CXX_FLAG = -P - -LIBC = cw32mti.lib -LIBFILES = $(CRYPT_LIB) import32.lib $(LIBC) odbc32.lib odbccp32.lib - -.IF "$(CFG)" == "Debug" -OPTIMIZE = -v -D_RTLDLL -DDEBUGGING -LINK_DBG = -v -.ELSE -OPTIMIZE = -O2 -D_RTLDLL -LINK_DBG = -.ENDIF - -CFLAGS = -w -g0 -tWM -tWD $(INCLUDES) $(DEFINES) $(LOCDEFS) \ - $(PCHFLAGS) $(OPTIMIZE) -LINK_FLAGS = $(LINK_DBG) -L"$(INST_COREDIR)" -L"$(CCLIBDIR)" -OBJOUT_FLAG = -o -EXEOUT_FLAG = -e -LIBOUT_FLAG = - -.ELIF "$(CCTYPE)" == "GCC" - -CC = gcc -LINK32 = gcc -LIB32 = ar rc -IMPLIB = dlltool -RSC = rc - -o = .o -a = .a - -# -# Options -# - -INCLUDES = -I$(COREDIR) -I.\include -I. -I.. -DEFINES = -DWIN32 $(CRYPT_FLAG) -LOCDEFS = -DPERLDLL -DPERL_CORE -SUBSYS = console -CXX_FLAG = -xc++ - -LIBC = -lmsvcrt - -# same libs as MSVC -LIBFILES = $(CRYPT_LIB) $(LIBC) \ - -lmoldname -lkernel32 -luser32 -lgdi32 \ - -lwinspool -lcomdlg32 -ladvapi32 -lshell32 -lole32 \ - -loleaut32 -lnetapi32 -luuid -lwsock32 -lmpr \ - -lwinmm -lversion -lodbc32 - -.IF "$(CFG)" == "Debug" -OPTIMIZE = -g -DDEBUGGING -LINK_DBG = -g -.ELSE -OPTIMIZE = -g -O2 -LINK_DBG = -.ENDIF - -CFLAGS = $(INCLUDES) $(DEFINES) $(LOCDEFS) $(OPTIMIZE) -LINK_FLAGS = $(LINK_DBG) -L"$(INST_COREDIR)" -L"$(CCLIBDIR)" -OBJOUT_FLAG = -o -EXEOUT_FLAG = -o -LIBOUT_FLAG = - -# NOTE: we assume that GCC uses MSVCRT.DLL -BUILDOPT += -fno-strict-aliasing -DPERL_MSVCRT_READFIX - -.ELSE - -CC = cl -LINK32 = link -LIB32 = $(LINK32) -lib -RSC = rc - -# -# Options -# - -INCLUDES = -I$(COREDIR) -I.\include -I. -I.. -#PCHFLAGS = -Fpc:\temp\vcmoduls.pch -YX -DEFINES = -DWIN32 -D_CONSOLE -DNO_STRICT $(CRYPT_FLAG) -LOCDEFS = -DPERLDLL -DPERL_CORE -SUBSYS = console -CXX_FLAG = -TP -GX - -.IF "$(USE_PERLCRT)" != "define" -LIBC = msvcrt.lib -.ELSE -LIBC = PerlCRT.lib -.ENDIF - -PERLEXE_RES = -PERLDLL_RES = - -.IF "$(CFG)" == "Debug" -.IF "$(CCTYPE)" == "MSVC20" -OPTIMIZE = -Od -MD -Z7 -DDEBUGGING -.ELSE -OPTIMIZE = -Od -MD -Zi -DDEBUGGING -.ENDIF -LINK_DBG = -debug -pdb:none -.ELSE -.IF "$(CFG)" == "Optimize" -# -O1 yields smaller code, which turns out to be faster than -O2 -#OPTIMIZE = -O2 -MD -DNDEBUG -OPTIMIZE = -O1 -MD -DNDEBUG -.ELSE -OPTIMIZE = -Od -MD -DNDEBUG -.ENDIF -LINK_DBG = -release -.ENDIF - -LIBBASEFILES = $(CRYPT_LIB) \ - oldnames.lib kernel32.lib user32.lib gdi32.lib winspool.lib \ - comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib \ - netapi32.lib uuid.lib wsock32.lib mpr.lib winmm.lib \ - version.lib odbc32.lib odbccp32.lib - -# we add LIBC here, since we may be using PerlCRT.dll -LIBFILES = $(LIBBASEFILES) $(LIBC) - -CFLAGS = -nologo -Gf -W3 $(INCLUDES) $(DEFINES) $(LOCDEFS) \ - $(PCHFLAGS) $(OPTIMIZE) -LINK_FLAGS = -nologo -nodefaultlib $(LINK_DBG) \ - -libpath:"$(INST_COREDIR)" \ - -machine:$(PROCESSOR_ARCHITECTURE) -OBJOUT_FLAG = -Fo -EXEOUT_FLAG = -Fe -LIBOUT_FLAG = /out: - -.IF "$(USE_PERLCRT)" != "define" -BUILDOPT += -DPERL_MSVCRT_READFIX -.ENDIF - -.ENDIF - -.IF "$(USE_OBJECT)" == "define" -OPTIMIZE += $(CXX_FLAG) -BUILDOPT += -DPERL_OBJECT -.ENDIF - -CFLAGS_O = $(CFLAGS) $(BUILDOPT) - -# used to allow local linking flags that are not propogated into Config.pm, -# currently unused -# -- BKS, 12-12-1999 -PRIV_LINK_FLAGS *= -BLINK_FLAGS = $(PRIV_LINK_FLAGS) $(LINK_FLAGS) - -#################### do not edit below this line ####################### -############# NO USER-SERVICEABLE PARTS BEYOND THIS POINT ############## - -o *= .obj -a *= .lib - -LKPRE = INPUT ( -LKPOST = ) - -# -# Rules -# - -.SUFFIXES : .c $(o) .dll $(a) .exe .rc .res - -.c$(o): - $(CC) -c $(null,$(<:d) $(NULL) -I$(<:d)) $(CFLAGS_O) $(OBJOUT_FLAG)$@ $< - -.y.c: - $(NOOP) - -$(o).dll: -.IF "$(CCTYPE)" == "BORLAND" - $(LINK32) -Tpd -ap $(BLINK_FLAGS) c0d32$(o) $<,$@,,$(LIBFILES),$(*B).def - $(IMPLIB) $(*B).lib $@ -.ELIF "$(CCTYPE)" == "GCC" - $(LINK32) -o $@ $(BLINK_FLAGS) $< $(LIBFILES) - $(IMPLIB) --input-def $(*B).def --output-lib $(*B).a $@ -.ELSE - $(LINK32) -dll -subsystem:windows -implib:$(*B).lib -def:$(*B).def \ - -out:$@ $(BLINK_FLAGS) $(LIBFILES) $< $(LIBPERL) -.ENDIF - -.rc.res: - $(RSC) -i.. $< - -# -# various targets -MINIPERL = ..\miniperl.exe -MINIDIR = .\mini -PERLEXE = ..\perl.exe -WPERLEXE = ..\wperl.exe -GLOBEXE = ..\perlglob.exe -CONFIGPM = ..\lib\Config.pm -MINIMOD = ..\lib\ExtUtils\Miniperl.pm -X2P = ..\x2p\a2p.exe - -PL2BAT = bin\pl2bat.pl -GLOBBAT = bin\perlglob.bat - -UTILS = \ - ..\utils\h2ph \ - ..\utils\splain \ - ..\utils\dprofpp \ - ..\utils\perlbug \ - ..\utils\pl2pm \ - ..\utils\c2ph \ - ..\utils\h2xs \ - ..\utils\perldoc \ - ..\utils\perlcc \ - ..\pod\checkpods \ - ..\pod\pod2html \ - ..\pod\pod2latex \ - ..\pod\pod2man \ - ..\pod\pod2text \ - ..\pod\pod2usage \ - ..\pod\podchecker \ - ..\pod\podselect \ - ..\x2p\find2perl \ - ..\x2p\s2p \ - bin\exetype.pl \ - bin\runperl.pl \ - bin\pl2bat.pl \ - bin\perlglob.pl \ - bin\search.pl - -.IF "$(CCTYPE)" == "BORLAND" - -CFGSH_TMPL = config.bc -CFGH_TMPL = config_H.bc - -.ELIF "$(CCTYPE)" == "GCC" - -CFGSH_TMPL = config.gc -CFGH_TMPL = config_H.gc -PERLIMPLIB = ..\libperl56$(a) - -.ELSE - -CFGSH_TMPL = config.vc -CFGH_TMPL = config_H.vc - -.ENDIF - -PERLIMPLIB *= ..\perl56$(a) -PERLDLL = ..\perl56.dll - -XCOPY = xcopy /f /r /i /d -RCOPY = xcopy /f /r /i /e /d -NOOP = @echo - -# -# filenames given to xsubpp must have forward slashes (since it puts -# full pathnames in #line strings) -XSUBPP = ..\$(MINIPERL) -I..\..\lib ..\$(EXTUTILSDIR)\xsubpp \ - -C++ -prototypes - -MICROCORE_SRC = \ - ..\av.c \ - ..\deb.c \ - ..\doio.c \ - ..\doop.c \ - ..\dump.c \ - ..\globals.c \ - ..\gv.c \ - ..\hv.c \ - ..\mg.c \ - ..\op.c \ - ..\perl.c \ - ..\perlapi.c \ - ..\perly.c \ - ..\pp.c \ - ..\pp_ctl.c \ - ..\pp_hot.c \ - ..\pp_sys.c \ - ..\regcomp.c \ - ..\regexec.c \ - ..\run.c \ - ..\scope.c \ - ..\sv.c \ - ..\taint.c \ - ..\toke.c \ - ..\universal.c \ - ..\utf8.c \ - ..\util.c \ - ..\xsutils.c - -EXTRACORE_SRC += perllib.c - -.IF "$(PERL_MALLOC)" == "define" -EXTRACORE_SRC += ..\malloc.c -.ENDIF - -.IF "$(USE_OBJECT)" != "define" -EXTRACORE_SRC += ..\perlio.c -.ENDIF - -WIN32_SRC = \ - .\win32.c \ - .\win32sck.c \ - .\win32thread.c - -.IF "$(CRYPT_SRC)" != "" -WIN32_SRC += .\$(CRYPT_SRC) -.ENDIF - -DLL_SRC = $(DYNALOADER).c - -X2P_SRC = \ - ..\x2p\a2p.c \ - ..\x2p\hash.c \ - ..\x2p\str.c \ - ..\x2p\util.c \ - ..\x2p\walk.c - -CORE_NOCFG_H = \ - ..\av.h \ - ..\cop.h \ - ..\cv.h \ - ..\dosish.h \ - ..\embed.h \ - ..\form.h \ - ..\gv.h \ - ..\handy.h \ - ..\hv.h \ - ..\iperlsys.h \ - ..\mg.h \ - ..\nostdio.h \ - ..\op.h \ - ..\opcode.h \ - ..\perl.h \ - ..\perlapi.h \ - ..\perlsdio.h \ - ..\perlsfio.h \ - ..\perly.h \ - ..\pp.h \ - ..\proto.h \ - ..\regexp.h \ - ..\scope.h \ - ..\sv.h \ - ..\thread.h \ - ..\unixish.h \ - ..\utf8.h \ - ..\util.h \ - ..\warnings.h \ - ..\XSUB.h \ - ..\EXTERN.h \ - ..\perlvars.h \ - ..\intrpvar.h \ - ..\thrdvar.h \ - .\include\dirent.h \ - .\include\netdb.h \ - .\include\sys\socket.h \ - .\win32.h - -CORE_H = $(CORE_NOCFG_H) .\config.h - -MICROCORE_OBJ = $(MICROCORE_SRC:db:+$(o)) -CORE_OBJ = $(MICROCORE_OBJ) $(EXTRACORE_SRC:db:+$(o)) -WIN32_OBJ = $(WIN32_SRC:db:+$(o)) -MINICORE_OBJ = $(MINIDIR)\{$(MICROCORE_OBJ:f) miniperlmain$(o) perlio$(o)} -MINIWIN32_OBJ = $(MINIDIR)\{$(WIN32_OBJ:f)} -MINI_OBJ = $(MINICORE_OBJ) $(MINIWIN32_OBJ) -DLL_OBJ = $(DLL_SRC:db:+$(o)) -X2P_OBJ = $(X2P_SRC:db:+$(o)) - -PERLDLL_OBJ = $(CORE_OBJ) -PERLEXE_OBJ = perlmain$(o) - -PERLDLL_OBJ += $(WIN32_OBJ) $(DLL_OBJ) - -.IF "$(USE_SETARGV)" != "" -SETARGV_OBJ = setargv$(o) -.ENDIF - -DYNAMIC_EXT = Socket IO Fcntl Opcode SDBM_File POSIX attrs Thread B re \ - Data/Dumper Devel/Peek ByteLoader Devel/DProf File/Glob \ - Sys/Hostname Storable -STATIC_EXT = DynaLoader -NONXS_EXT = Errno - -DYNALOADER = $(EXTDIR)\DynaLoader\DynaLoader -SOCKET = $(EXTDIR)\Socket\Socket -FCNTL = $(EXTDIR)\Fcntl\Fcntl -OPCODE = $(EXTDIR)\Opcode\Opcode -SDBM_FILE = $(EXTDIR)\SDBM_File\SDBM_File -IO = $(EXTDIR)\IO\IO -POSIX = $(EXTDIR)\POSIX\POSIX -ATTRS = $(EXTDIR)\attrs\attrs -THREAD = $(EXTDIR)\Thread\Thread -B = $(EXTDIR)\B\B -RE = $(EXTDIR)\re\re -DUMPER = $(EXTDIR)\Data\Dumper\Dumper -ERRNO = $(EXTDIR)\Errno\Errno -PEEK = $(EXTDIR)\Devel\Peek\Peek -BYTELOADER = $(EXTDIR)\ByteLoader\ByteLoader -DPROF = $(EXTDIR)\Devel\DProf\DProf -GLOB = $(EXTDIR)\File\Glob\Glob -HOSTNAME = $(EXTDIR)\Sys\Hostname\Hostname -STORABLE = $(EXTDIR)\Storable\Storable - -SOCKET_DLL = $(AUTODIR)\Socket\Socket.dll -FCNTL_DLL = $(AUTODIR)\Fcntl\Fcntl.dll -OPCODE_DLL = $(AUTODIR)\Opcode\Opcode.dll -SDBM_FILE_DLL = $(AUTODIR)\SDBM_File\SDBM_File.dll -IO_DLL = $(AUTODIR)\IO\IO.dll -POSIX_DLL = $(AUTODIR)\POSIX\POSIX.dll -ATTRS_DLL = $(AUTODIR)\attrs\attrs.dll -THREAD_DLL = $(AUTODIR)\Thread\Thread.dll -B_DLL = $(AUTODIR)\B\B.dll -DUMPER_DLL = $(AUTODIR)\Data\Dumper\Dumper.dll -PEEK_DLL = $(AUTODIR)\Devel\Peek\Peek.dll -RE_DLL = $(AUTODIR)\re\re.dll -BYTELOADER_DLL = $(AUTODIR)\ByteLoader\ByteLoader.dll -DPROF_DLL = $(AUTODIR)\Devel\DProf\DProf.dll -GLOB_DLL = $(AUTODIR)\File\Glob\Glob.dll -HOSTNAME_DLL = $(AUTODIR)\Sys\Hostname\Hostname.dll -STORABLE_DLL = $(AUTODIR)\Storable\Storable.dll - -ERRNO_PM = $(LIBDIR)\Errno.pm - -EXTENSION_C = \ - $(SOCKET).c \ - $(FCNTL).c \ - $(OPCODE).c \ - $(SDBM_FILE).c \ - $(IO).c \ - $(POSIX).c \ - $(ATTRS).c \ - $(THREAD).c \ - $(RE).c \ - $(DUMPER).c \ - $(PEEK).c \ - $(B).c \ - $(BYTELOADER).c \ - $(DPROF).c \ - $(GLOB).c \ - $(HOSTNAME).c \ - $(STORABLE).c - -EXTENSION_DLL = \ - $(SOCKET_DLL) \ - $(FCNTL_DLL) \ - $(OPCODE_DLL) \ - $(SDBM_FILE_DLL)\ - $(IO_DLL) \ - $(POSIX_DLL) \ - $(ATTRS_DLL) \ - $(DUMPER_DLL) \ - $(PEEK_DLL) \ - $(B_DLL) \ - $(RE_DLL) \ - $(THREAD_DLL) \ - $(BYTELOADER_DLL) \ - $(DPROF_DLL) \ - $(GLOB_DLL) \ - $(HOSTNAME_DLL) \ - $(STORABLE_DLL) - -EXTENSION_PM = \ - $(ERRNO_PM) - -POD2HTML = $(PODDIR)\pod2html -POD2MAN = $(PODDIR)\pod2man -POD2LATEX = $(PODDIR)\pod2latex -POD2TEXT = $(PODDIR)\pod2text - -# vars must be separated by "\t+~\t+", since we're using the tempfile -# version of config_sh.pl (we were overflowing someone's buffer by -# trying to fit them all on the command line) -# -- BKS 10-17-1999 -CFG_VARS = \ - INST_DRV=$(INST_DRV) ~ \ - INST_TOP=$(INST_TOP:s/\/\\/) ~ \ - INST_VER=$(INST_VER:s/\/\\/) ~ \ - INST_ARCH=$(INST_ARCH) ~ \ - archname=$(ARCHNAME) ~ \ - cc=$(CC) ~ \ - ccflags=$(OPTIMIZE) $(DEFINES) $(BUILDOPT) ~ \ - cf_email=$(EMAIL) ~ \ - d_crypt=$(D_CRYPT) ~ \ - d_mymalloc=$(PERL_MALLOC) ~ \ - libs=$(LIBFILES:f) ~ \ - incpath=$(CCINCDIR:s/\/\\/) ~ \ - libperl=$(PERLIMPLIB:f) ~ \ - libpth=$(CCLIBDIR:s/\/\\/);$(EXTRALIBDIRS:s/\/\\/) ~ \ - libc=$(LIBC) ~ \ - make=dmake ~ \ - _o=$(o) obj_ext=$(o) ~ \ - _a=$(a) lib_ext=$(a) ~ \ - static_ext=$(STATIC_EXT) ~ \ - dynamic_ext=$(DYNAMIC_EXT) ~ \ - nonxs_ext=$(NONXS_EXT) ~ \ - use5005threads=$(USE_5005THREADS) ~ \ - useithreads=$(USE_ITHREADS) ~ \ - usethreads=$(USE_5005THREADS) ~ \ - usemultiplicity=$(USE_MULTI) ~ \ - LINK_FLAGS=$(LINK_FLAGS:s/\/\\/) ~ \ - optimize=$(OPTIMIZE) - -# -# set up targets varying between Win95 and WinNT builds -# - -.IF "$(IS_WIN95)" == "define" -MK2 = .\makefile.95 -RIGHTMAKE = __switch_makefiles -NOOP = @rem -.ELSE -MK2 = __not_needed -RIGHTMAKE = __not_needed -.ENDIF - -# -# Top targets -# - -all : .\config.h $(GLOBEXE) $(MINIPERL) $(MK2) \ - $(RIGHTMAKE) $(MINIMOD) $(CONFIGPM) $(PERLEXE) \ - $(X2P) $(EXTENSION_DLL) $(EXTENSION_PM) - -$(DYNALOADER)$(o) : $(DYNALOADER).c $(CORE_H) $(EXTDIR)\DynaLoader\dlutils.c - -#---------------------------------------------------------------- - -#-------------------- BEGIN Win95 SPECIFIC ---------------------- - -# this target is a jump-off point for Win95 -# 1. it switches to the Win95-specific makefile if it exists -# (__do_switch_makefiles) -# 2. it prints a message when the Win95-specific one finishes (__done) -# 3. it then kills this makefile by trying to make __no_such_target - -__switch_makefiles: __do_switch_makefiles __done __no_such_target - -__do_switch_makefiles: -.IF "$(NOTFIRST)" != "true" - if exist $(MK2) $(MAKE:s/-S//) -f $(MK2) $(MAKETARGETS) NOTFIRST=true -.ELSE - $(NOOP) -.ENDIF - -.IF "$(NOTFIRST)" != "true" -__done: - @echo Build process complete. Ignore any errors after this message. - @echo Run "dmake test" to test and "dmake install" to install - -.ELSE -# dummy targets for Win95-specific makefile - -__done: - $(NOOP) - -__no_such_target: - $(NOOP) - -.ENDIF - -# This target is used to generate the new makefile (.\makefile.95) for Win95 - -.\makefile.95: .\makefile.mk - $(MINIPERL) genmk95.pl makefile.mk $(MK2) - -#--------------------- END Win95 SPECIFIC --------------------- - -# a blank target for when builds don't need to do certain things -# this target added for Win95 port but used to keep the WinNT port able to -# use this file -__not_needed: - $(NOOP) - -$(GLOBEXE) : perlglob$(o) -.IF "$(CCTYPE)" == "BORLAND" - $(CC) -c -w -v -tWM -I"$(CCINCDIR)" perlglob.c - $(LINK32) -Tpe -ap $(BLINK_FLAGS) c0x32$(o) perlglob$(o) \ - "$(CCLIBDIR)\32BIT\wildargs$(o)",$@,,import32.lib cw32mt.lib, -.ELIF "$(CCTYPE)" == "GCC" - $(LINK32) $(BLINK_FLAGS) -mconsole -o $@ perlglob$(o) $(LIBFILES) -.ELSE - $(LINK32) $(BLINK_FLAGS) $(LIBFILES) -out:$@ -subsystem:$(SUBSYS) \ - perlglob$(o) setargv$(o) -.ENDIF - -perlglob$(o) : perlglob.c - -config.w32 : $(CFGSH_TMPL) - copy $(CFGSH_TMPL) config.w32 - -.\config.h : $(CFGH_TMPL) $(CORE_NOCFG_H) - -del /f config.h - copy $(CFGH_TMPL) config.h - -..\config.sh : config.w32 $(MINIPERL) config_sh.PL - $(MINIPERL) -I..\lib config_sh.PL --cfgsh-option-file \ - $(mktmp $(CFG_VARS)) config.w32 > ..\config.sh - -# this target is for when changes to the main config.sh happen -# edit config.{b,v,g}c and make this target once for each supported -# compiler (e.g. `dmake CCTYPE=BORLAND regen_config_h`) -regen_config_h: - perl config_sh.PL --cfgsh-option-file $(mktmp $(CFG_VARS)) \ - $(CFGSH_TMPL) > ..\config.sh - -cd .. && del /f perl.exe - cd .. && perl configpm - -del /f $(CFGH_TMPL) - -mkdir $(COREDIR) - -perl -I..\lib config_h.PL "INST_VER=$(INST_VER)" - rename config.h $(CFGH_TMPL) - -$(CONFIGPM) : $(MINIPERL) ..\config.sh config_h.PL ..\minimod.pl - cd .. && miniperl configpm - if exist lib\* $(RCOPY) lib\*.* ..\lib\$(NULL) - $(XCOPY) ..\*.h $(COREDIR)\*.* - $(XCOPY) *.h $(COREDIR)\*.* - $(XCOPY) ..\ext\re\re.pm $(LIBDIR)\*.* - $(RCOPY) include $(COREDIR)\*.* - $(MINIPERL) -I..\lib config_h.PL "INST_VER=$(INST_VER)" \ - || $(MAKE) $(MAKEMACROS) $(CONFIGPM) $(MAKEFILE) - -$(MINIPERL) : $(MINIDIR) $(MINI_OBJ) $(CRTIPMLIBS) -.IF "$(CCTYPE)" == "BORLAND" - $(LINK32) -Tpe -ap $(BLINK_FLAGS) \ - @$(mktmp c0x32$(o) $(MINI_OBJ:s,\,\\),$(@:s,\,\\),,$(LIBFILES),) -.ELIF "$(CCTYPE)" == "GCC" - $(LINK32) -v -mconsole -o $@ $(BLINK_FLAGS) \ - $(mktmp $(LKPRE) $(MINI_OBJ:s,\,\\) $(LIBFILES) $(LKPOST)) -.ELSE - $(LINK32) -subsystem:console -out:$@ \ - @$(mktmp $(BLINK_FLAGS) $(LIBFILES) $(MINI_OBJ:s,\,\\)) -.ENDIF - -$(MINIDIR) : - if not exist "$(MINIDIR)" mkdir "$(MINIDIR)" - -$(MINICORE_OBJ) : $(CORE_NOCFG_H) - $(CC) -c $(CFLAGS) -DPERL_EXTERNAL_GLOB $(OBJOUT_FLAG)$@ ..\$(*B).c - -$(MINIWIN32_OBJ) : $(CORE_NOCFG_H) - $(CC) -c $(CFLAGS) $(OBJOUT_FLAG)$@ $(*B).c - -# -DPERL_IMPLICIT_SYS needs C++ for perllib.c -# rules wrapped in .IFs break Win9X build (we end up with unbalanced []s unless -# unless the .IF is true), so instead we use a .ELSE with the default. -# This is the only file that depends on perlhost.h, vmem.h, and vdir.h - -perllib$(o) : perllib.c .\perlhost.h .\vdir.h .\vmem.h -.IF "$(USE_IMP_SYS)$(USE_OBJECT)" == "defineundef" - $(CC) -c -I. $(CFLAGS_O) $(CXX_FLAG) $(OBJOUT_FLAG)$@ perllib.c -.ELSE - $(CC) -c -I. $(CFLAGS_O) $(OBJOUT_FLAG)$@ perllib.c -.ENDIF - -# 1. we don't want to rebuild miniperl.exe when config.h changes -# 2. we don't want to rebuild miniperl.exe with non-default config.h -$(MINI_OBJ) : $(CORE_NOCFG_H) - -$(WIN32_OBJ) : $(CORE_H) -$(CORE_OBJ) : $(CORE_H) -$(DLL_OBJ) : $(CORE_H) -$(X2P_OBJ) : $(CORE_H) - -perldll.def : $(MINIPERL) $(CONFIGPM) ..\global.sym ..\pp.sym ..\makedef.pl - $(MINIPERL) -w ..\makedef.pl PLATFORM=win32 $(OPTIMIZE) $(DEFINES) \ - $(BUILDOPT) CCTYPE=$(CCTYPE) > perldll.def - -$(PERLDLL): perldll.def $(PERLDLL_OBJ) $(PERLDLL_RES) -.IF "$(CCTYPE)" == "BORLAND" - $(LINK32) -Tpd -ap $(BLINK_FLAGS) \ - @$(mktmp c0d32$(o) $(PERLDLL_OBJ:s,\,\\)\n \ - $@,\n \ - $(LIBFILES)\n \ - perldll.def\n) - $(IMPLIB) $*.lib $@ -.ELIF "$(CCTYPE)" == "GCC" - $(LINK32) -mdll -o $@ -Wl,--base-file -Wl,perl.base $(BLINK_FLAGS) \ - $(mktmp $(LKPRE) $(PERLDLL_OBJ:s,\,\\) $(LIBFILES) $(LKPOST)) - dlltool --output-lib $(PERLIMPLIB) \ - --dllname $(PERLDLL:b).dll \ - --def perldll.def \ - --base-file perl.base \ - --output-exp perl.exp - $(LINK32) -mdll -o $@ $(BLINK_FLAGS) \ - $(mktmp $(LKPRE) $(PERLDLL_OBJ:s,\,\\) $(LIBFILES) \ - perl.exp $(LKPOST)) -.ELSE - $(LINK32) -dll -def:perldll.def -out:$@ \ - @$(mktmp -base:0x28000000 $(BLINK_FLAGS) $(DELAYLOAD) $(LIBFILES) \ - $(PERLDLL_RES) $(PERLDLL_OBJ:s,\,\\)) -.ENDIF - $(XCOPY) $(PERLIMPLIB) $(COREDIR) - -$(MINIMOD) : $(MINIPERL) ..\minimod.pl - cd .. && miniperl minimod.pl > lib\ExtUtils\Miniperl.pm - -..\x2p\a2p$(o) : ..\x2p\a2p.c - $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\a2p.c - -..\x2p\hash$(o) : ..\x2p\hash.c - $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\hash.c - -..\x2p\str$(o) : ..\x2p\str.c - $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\str.c - -..\x2p\util$(o) : ..\x2p\util.c - $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\util.c - -..\x2p\walk$(o) : ..\x2p\walk.c - $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\walk.c - -$(X2P) : $(MINIPERL) $(X2P_OBJ) - $(MINIPERL) ..\x2p\find2perl.PL - $(MINIPERL) ..\x2p\s2p.PL -.IF "$(CCTYPE)" == "BORLAND" - $(LINK32) -Tpe -ap $(BLINK_FLAGS) \ - @$(mktmp c0x32$(o) $(X2P_OBJ:s,\,\\),$(@:s,\,\\),,$(LIBFILES),) -.ELIF "$(CCTYPE)" == "GCC" - $(LINK32) -v -o $@ $(BLINK_FLAGS) \ - $(mktmp $(LKPRE) $(X2P_OBJ:s,\,\\) $(LIBFILES) $(LKPOST)) -.ELSE - $(LINK32) -subsystem:console -out:$@ \ - @$(mktmp $(BLINK_FLAGS) $(LIBFILES) $(X2P_OBJ:s,\,\\)) -.ENDIF - -perlmain.c : runperl.c - copy runperl.c perlmain.c - -perlmain$(o) : perlmain.c - $(CC) $(CFLAGS_O) -UPERLDLL $(OBJOUT_FLAG)$@ -c perlmain.c - -$(PERLEXE): $(PERLDLL) $(CONFIGPM) $(PERLEXE_OBJ) $(PERLEXE_RES) -.IF "$(CCTYPE)" == "BORLAND" - $(LINK32) -Tpe -ap $(BLINK_FLAGS) \ - @$(mktmp c0x32$(o) $(PERLEXE_OBJ:s,\,\\)\n \ - $(@:s,\,\\),\n \ - $(PERLIMPLIB) $(LIBFILES)\n) -.ELIF "$(CCTYPE)" == "GCC" - $(LINK32) -mconsole -o $@ $(BLINK_FLAGS) \ - $(PERLEXE_OBJ) $(PERLIMPLIB) $(LIBFILES) -.ELSE - $(LINK32) -subsystem:console -out:$@ -stack:0x1000000 $(BLINK_FLAGS) \ - $(LIBFILES) $(PERLEXE_OBJ) $(SETARGV_OBJ) $(PERLIMPLIB) $(PERLEXE_RES) -.ENDIF - copy $(PERLEXE) $(WPERLEXE) - $(MINIPERL) -I..\lib bin\exetype.pl $(WPERLEXE) WINDOWS - copy splittree.pl .. - $(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR) - -$(DYNALOADER).c: $(MINIPERL) $(EXTDIR)\DynaLoader\dl_win32.xs $(CONFIGPM) - if not exist $(AUTODIR) mkdir $(AUTODIR) - cd $(EXTDIR)\$(*B) && ..\$(MINIPERL) -I..\..\lib $(*B)_pm.PL - cd $(EXTDIR)\$(*B) && ..\$(MINIPERL) -I..\..\lib XSLoader_pm.PL - $(XCOPY) $(EXTDIR)\$(*B)\$(*B).pm $(LIBDIR)\$(NULL) - $(XCOPY) $(EXTDIR)\$(*B)\XSLoader.pm $(LIBDIR)\$(NULL) - cd $(EXTDIR)\$(*B) && $(XSUBPP) dl_win32.xs > $(*B).c - $(XCOPY) $(EXTDIR)\$(*B)\dlutils.c . - -$(EXTDIR)\DynaLoader\dl_win32.xs: dl_win32.xs - copy dl_win32.xs $(EXTDIR)\DynaLoader\dl_win32.xs - -$(DUMPER_DLL): $(PERLEXE) $(DUMPER).xs - cd $(EXTDIR)\Data\$(*B) && \ - ..\..\..\miniperl -I..\..\..\lib Makefile.PL INSTALLDIRS=perl - cd $(EXTDIR)\Data\$(*B) && $(MAKE) - -$(DPROF_DLL): $(PERLEXE) $(DPROF).xs - cd $(EXTDIR)\Devel\$(*B) && \ - ..\..\..\miniperl -I..\..\..\lib Makefile.PL INSTALLDIRS=perl - cd $(EXTDIR)\Devel\$(*B) && $(MAKE) - -$(GLOB_DLL): $(PERLEXE) $(GLOB).xs - cd $(EXTDIR)\File\$(*B) && \ - ..\..\..\miniperl -I..\..\..\lib Makefile.PL INSTALLDIRS=perl - cd $(EXTDIR)\File\$(*B) && $(MAKE) - -$(PEEK_DLL): $(PERLEXE) $(PEEK).xs - cd $(EXTDIR)\Devel\$(*B) && \ - ..\..\..\miniperl -I..\..\..\lib Makefile.PL INSTALLDIRS=perl - cd $(EXTDIR)\Devel\$(*B) && $(MAKE) - -$(RE_DLL): $(PERLEXE) $(RE).xs - cd $(EXTDIR)\$(*B) && \ - ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl - cd $(EXTDIR)\$(*B) && $(MAKE) - -$(B_DLL): $(PERLEXE) $(B).xs - cd $(EXTDIR)\$(*B) && \ - ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl - cd $(EXTDIR)\$(*B) && $(MAKE) - -$(THREAD_DLL): $(PERLEXE) $(THREAD).xs - cd $(EXTDIR)\$(*B) && \ - ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl - cd $(EXTDIR)\$(*B) && $(MAKE) - -$(ATTRS_DLL): $(PERLEXE) $(ATTRS).xs - cd $(EXTDIR)\$(*B) && \ - ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl - cd $(EXTDIR)\$(*B) && $(MAKE) - -$(POSIX_DLL): $(PERLEXE) $(POSIX).xs - cd $(EXTDIR)\$(*B) && \ - ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl - cd $(EXTDIR)\$(*B) && $(MAKE) - -$(IO_DLL): $(PERLEXE) $(IO).xs - cd $(EXTDIR)\$(*B) && \ - ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl - cd $(EXTDIR)\$(*B) && $(MAKE) - -$(SDBM_FILE_DLL) : $(PERLEXE) $(SDBM_FILE).xs - cd $(EXTDIR)\$(*B) && \ - ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl - cd $(EXTDIR)\$(*B) && $(MAKE) - -$(FCNTL_DLL): $(PERLEXE) $(FCNTL).xs - cd $(EXTDIR)\$(*B) && \ - ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl - cd $(EXTDIR)\$(*B) && $(MAKE) - -$(OPCODE_DLL): $(PERLEXE) $(OPCODE).xs - cd $(EXTDIR)\$(*B) && \ - ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl - cd $(EXTDIR)\$(*B) && $(MAKE) - -$(SOCKET_DLL): $(PERLEXE) $(SOCKET).xs - cd $(EXTDIR)\$(*B) && \ - ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl - cd $(EXTDIR)\$(*B) && $(MAKE) - -$(HOSTNAME_DLL): $(PERLEXE) $(HOSTNAME).xs - cd $(EXTDIR)\Sys\$(*B) && \ - ..\..\..\miniperl -I..\..\..\lib Makefile.PL INSTALLDIRS=perl - cd $(EXTDIR)\Sys\$(*B) && $(MAKE) - -$(BYTELOADER_DLL): $(PERLEXE) $(BYTELOADER).xs - cd $(EXTDIR)\$(*B) && \ - ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl - cd $(EXTDIR)\$(*B) && $(MAKE) - -$(STORABLE_DLL): $(PERLEXE) $(STORABLE).xs - cd $(EXTDIR)\$(*B) && \ - ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl - cd $(EXTDIR)\$(*B) && $(MAKE) - -$(ERRNO_PM): $(PERLEXE) $(ERRNO)_pm.PL - cd $(EXTDIR)\$(*B) && \ - ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl - cd $(EXTDIR)\$(*B) && $(MAKE) - -doc: $(PERLEXE) - $(PERLEXE) -I..\lib ..\installhtml --podroot=.. --htmldir=./html \ - --podpath=pod:lib:ext:utils --htmlroot="file://$(INST_HTML:s,:,|,)"\ - --libpod=perlfunc:perlguts:perlvar:perlrun:perlop --recurse - -utils: $(PERLEXE) $(X2P) - cd ..\utils && $(MAKE) PERL=$(MINIPERL) - copy ..\README.amiga ..\pod\perlamiga.pod - copy ..\README.cygwin ..\pod\perlcygwin.pod - copy ..\README.dos ..\pod\perldos.pod - copy ..\README.hpux ..\pod\perlhpux.pod - copy ..\README.machten ..\pod\perlmachten.pod - copy ..\README.os2 ..\pod\perlos2.pod - copy ..\README.os2 ..\pod\perlos2.pod - copy ..\vms\perlvms.pod ..\pod\perlvms.pod - cd ..\pod && $(MAKE) -f ..\win32\pod.mak converters - cd ..\lib && $(PERLEXE) lib_pm.PL - $(PERLEXE) $(PL2BAT) $(UTILS) - -distclean: clean - -del /f $(MINIPERL) $(PERLEXE) $(PERLDLL) $(GLOBEXE) \ - $(PERLIMPLIB) ..\miniperl$(a) $(MINIMOD) - -del /f *.def *.map - -del /f $(EXTENSION_DLL) $(EXTENSION_PM) - -del /f $(EXTENSION_C) $(DYNALOADER).c $(ERRNO).pm - -del /f $(EXTDIR)\DynaLoader\dl_win32.xs - -del /f $(LIBDIR)\.exists $(LIBDIR)\attrs.pm $(LIBDIR)\DynaLoader.pm - -del /f $(LIBDIR)\XSLoader.pm - -del /f $(LIBDIR)\Fcntl.pm $(LIBDIR)\IO.pm $(LIBDIR)\Opcode.pm - -del /f $(LIBDIR)\ops.pm $(LIBDIR)\Safe.pm $(LIBDIR)\Thread.pm - -del /f $(LIBDIR)\SDBM_File.pm $(LIBDIR)\Socket.pm $(LIBDIR)\POSIX.pm - -del /f $(LIBDIR)\B.pm $(LIBDIR)\O.pm $(LIBDIR)\re.pm - -del /f $(LIBDIR)\Data\Dumper.pm $(LIBDIR)\ByteLoader.pm - -del /f $(LIBDIR)\Devel\Peek.pm $(LIBDIR)\Devel\DProf.pm - -del /f $(LIBDIR)\File\Glob.pm - -del /f $(LIBDIR)\Storable.pm - -if exist $(LIBDIR)\IO rmdir /s /q $(LIBDIR)\IO || rmdir /s $(LIBDIR)\IO - -if exist $(LIBDIR)\Thread rmdir /s /q $(LIBDIR)\Thread || rmdir /s $(LIBDIR)\Thread - -if exist $(LIBDIR)\B rmdir /s /q $(LIBDIR)\B || rmdir /s $(LIBDIR)\B - -if exist $(LIBDIR)\Data rmdir /s /q $(LIBDIR)\Data || rmdir /s $(LIBDIR)\Data - -del /f $(PODDIR)\*.html - -del /f $(PODDIR)\*.bat - -cd ..\utils && del /f h2ph splain perlbug pl2pm c2ph h2xs perldoc \ - dprofpp *.bat - -cd ..\x2p && del /f find2perl s2p *.bat - -del /f ..\config.sh ..\splittree.pl perlmain.c dlutils.c config.h.new - -del /f $(CONFIGPM) - -del /f bin\*.bat - -cd $(EXTDIR) && del /s *$(a) *.def *.map *.pdb *.bs Makefile *$(o) \ - pm_to_blib - -if exist $(AUTODIR) rmdir /s /q $(AUTODIR) || rmdir /s $(AUTODIR) - -if exist $(COREDIR) rmdir /s /q $(COREDIR) || rmdir /s $(COREDIR) - -install : all installbare installhtml - -installbare : $(RIGHTMAKE) utils - $(PERLEXE) ..\installperl - if exist $(WPERLEXE) $(XCOPY) $(WPERLEXE) $(INST_BIN)\*.* - $(XCOPY) $(GLOBEXE) $(INST_BIN)\*.* - $(XCOPY) bin\*.bat $(INST_SCRIPT)\*.* - -installhtml : doc - $(RCOPY) html\*.* $(INST_HTML)\*.* - -inst_lib : $(CONFIGPM) - copy splittree.pl .. - $(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR) - $(RCOPY) ..\lib $(INST_LIB)\*.* - -minitest : $(MINIPERL) $(GLOBEXE) $(CONFIGPM) utils - $(XCOPY) $(MINIPERL) ..\t\perl.exe -.IF "$(CCTYPE)" == "BORLAND" - $(XCOPY) $(GLOBBAT) ..\t\$(NULL) -.ELSE - $(XCOPY) $(GLOBEXE) ..\t\$(NULL) -.ENDIF - attrib -r ..\t\*.* - copy test ..\t - cd ..\t && \ - $(MINIPERL) -I..\lib test base/*.t comp/*.t cmd/*.t io/*.t op/*.t pragma/*.t - -test-prep : all utils - $(XCOPY) $(PERLEXE) ..\t\$(NULL) - $(XCOPY) $(PERLDLL) ..\t\$(NULL) -.IF "$(CCTYPE)" == "BORLAND" - $(XCOPY) $(GLOBBAT) ..\t\$(NULL) -.ELSE - $(XCOPY) $(GLOBEXE) ..\t\$(NULL) -.ENDIF - -test : $(RIGHTMAKE) test-prep - cd ..\t && $(PERLEXE) -I..\lib harness - -test-notty : test-prep - set PERL_SKIP_TTY_TEST=1 && \ - cd ..\t && $(PERLEXE) -I.\lib harness - -test-wide : test-prep - set HARNESS_PERL_SWITCHES=-C && \ - cd ..\t && $(PERLEXE) -I..\lib harness - -test-wide-notty : test-prep - set PERL_SKIP_TTY_TEST=1 && \ - set HARNESS_PERL_SWITCHES=-C && \ - cd ..\t && $(PERLEXE) -I..\lib harness - -clean : - -@erase miniperlmain$(o) - -@erase $(MINIPERL) - -@erase perlglob$(o) - -@erase perlmain$(o) - -@erase config.w32 - -@erase /f config.h - -@erase $(GLOBEXE) - -@erase $(PERLEXE) - -@erase $(WPERLEXE) - -@erase $(PERLDLL) - -@erase $(CORE_OBJ) - -if exist $(MINIDIR) rmdir /s /q $(MINIDIR) || rmdir /s $(MINIDIR) - -@erase $(WIN32_OBJ) - -@erase $(DLL_OBJ) - -@erase $(X2P_OBJ) - -@erase ..\*$(o) ..\*$(a) ..\*.exp *$(o) *$(a) *.exp *.res - -@erase ..\t\*.exe ..\t\*.dll ..\t\*.bat - -@erase ..\x2p\*.exe ..\x2p\*.bat - -@erase *.ilk - -@erase *.pdb - -# Handy way to run perlbug -ok without having to install and run the -# installed perlbug. We don't re-run the tests here - we trust the user. -# Please *don't* use this unless all tests pass. -# If you want to report test failures, use "dmake nok" instead. -ok: utils - $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)" - -okfile: utils - $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)" -F perl.ok - -nok: utils - $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)" - -nokfile: utils - $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)" -F perl.nok +# +# Makefile to build perl on Windows NT using DMAKE. +# Supported compilers: +# Visual C++ 2.0 thro 6.0 +# Borland C++ 5.02 +# Mingw32 with gcc-2.95.2 or better **experimental** +# +# This is set up to build a perl.exe that runs off a shared library +# (perl56.dll). Also makes individual DLLs for the XS extensions. +# + +## +## Make sure you read README.win32 *before* you mess with anything here! +## + +## +## Build configuration. Edit the values below to suit your needs. +## + +# +# Set these to wherever you want "dmake install" to put your +# newly built perl. +# +INST_DRV *= c: +INST_TOP *= $(INST_DRV)\perl + +# +# Comment this out if you DON'T want your perl installation to be versioned. +# This means that the new installation will overwrite any files from the +# old installation at the same INST_TOP location. Leaving it enabled is +# the safest route, as perl adds the extra version directory to all the +# locations it installs files to. If you disable it, an alternative +# versioned installation can be obtained by setting INST_TOP above to a +# path that includes an arbitrary version string. +# +INST_VER *= \5.6.0 + +# +# Comment this out if you DON'T want your perl installation to have +# architecture specific components. This means that architecture- +# specific files will be installed along with the architecture-neutral +# files. Leaving it enabled is safer and more flexible, in case you +# want to build multiple flavors of perl and install them together in +# the same location. Commenting it out gives you a simpler +# installation that is easier to understand for beginners. +# +INST_ARCH *= \$(ARCHNAME) + +# +# uncomment to enable multiple interpreters. This is need for fork() +# emulation. +# +#USE_MULTI *= define + +# +# Beginnings of interpreter cloning/threads; still very incomplete. +# This should be enabled to get the fork() emulation. This needs +# USE_MULTI as well. +# +#USE_ITHREADS *= define + +# +# uncomment to enable the implicit "host" layer for all system calls +# made by perl. This needs USE_MULTI above. This is also needed to +# get fork(). +# +#USE_IMP_SYS *= define + +# +# WARNING! This option is deprecated and will eventually go away (enable +# USE_ITHREADS instead). +# +# uncomment to enable threads-capabilities. This is incompatible with +# USE_ITHREADS, and is only here for people who may have come to rely +# on the experimental Thread support that was in 5.005. +# +#USE_5005THREADS *= define + +# +# WARNING! This option is deprecated and will eventually go away (enable +# USE_MULTI instead). +# +# uncomment next line if you want to use the PERL_OBJECT build option. +# DO NOT ENABLE unless you have legacy code that relies on the C++ +# CPerlObj class that was available in 5.005. This cannot be enabled +# if you ask for USE_5005THREADS above. +# +#USE_OBJECT *= define + +# +# uncomment exactly one of the following +# +# Visual C++ 2.x +#CCTYPE *= MSVC20 +# Visual C++ > 2.x and < 6.x +#CCTYPE *= MSVC +# Visual C++ >= 6.x +#CCTYPE *= MSVC60 +# Borland 5.02 or later +#CCTYPE *= BORLAND +# mingw32+gcc-2.95.2 or better +CCTYPE *= GCC + +# +# uncomment this if you are compiling under Windows 95/98 and command.com +# (not needed if you're running under 4DOS/NT 6.01 or later) +#IS_WIN95 *= define + +# +# uncomment next line if you want debug version of perl (big,slow) +# If not enabled, we automatically try to use maximum optimization +# with all compilers that are known to have a working optimizer. +# +#CFG *= Debug + +# +# uncomment to enable use of PerlCRT.DLL when using the Visual C compiler. +# It has patches that fix known bugs in older versions of MSVCRT.DLL. +# This currently requires VC 5.0 with Service Pack 3 or later. +# Get it from CPAN at http://www.perl.com/CPAN/authors/id/D/DO/DOUGL/ +# and follow the directions in the package to install. +# +# Not recommended if you have VC 6.x and you're not running Windows 9x. +# +#USE_PERLCRT *= define + +# +# uncomment to enable linking with setargv.obj under the Visual C +# compiler. Setting this options enables perl to expand wildcards in +# arguments, but it may be harder to use alternate methods like +# File::DosGlob that are more powerful. This option is supported only with +# Visual C. +# +#USE_SETARGV *= define + +# +# if you have the source for des_fcrypt(), uncomment this and make sure the +# file exists (see README.win32). File should be located in the same +# directory as this file. +# +#CRYPT_SRC *= fcrypt.c + +# +# if you didn't set CRYPT_SRC and if you have des_fcrypt() available in a +# library, uncomment this, and make sure the library exists (see README.win32) +# Specify the full pathname of the library. +# +#CRYPT_LIB *= fcrypt.lib + +# +# set this if you wish to use perl's malloc +# WARNING: Turning this on/off WILL break binary compatibility with extensions +# you may have compiled with/without it. Be prepared to recompile all +# extensions if you change the default. Currently, this cannot be enabled +# if you ask for USE_IMP_SYS above. +# +#PERL_MALLOC *= define + +# +# set the install locations of the compiler include/libraries +# Running VCVARS32.BAT is *required* when using Visual C. +# Some versions of Visual C don't define MSVCDIR in the environment, +# so you may have to set CCHOME explicitly (spaces in the path name should +# not be quoted) +# +#CCHOME *= c:\bc5 +#CCHOME *= $(MSVCDIR) +CCHOME *= c:\gcc-2.95.2-msvcrt +CCINCDIR *= $(CCHOME)\include +CCLIBDIR *= $(CCHOME)\lib + +# +# Additional compiler flags can be specified here. +# + +# +# This should normally be disabled. Adding -DPERL_POLLUTE enables support +# for old symbols by default, at the expense of extreme pollution. You most +# probably just want to build modules that won't compile with +# perl Makefile.PL POLLUTE=1 +# instead of enabling this. Please report such modules to the respective +# authors. +# +#BUILDOPT += -DPERL_POLLUTE + +# +# This should normally be disabled. Enabling it will disable the File::Glob +# implementation of CORE::glob. +# +#BUILDOPT += -DPERL_EXTERNAL_GLOB + +# +# This should normally be disabled. Enabling it causes perl to read scripts +# in text mode (which is the 5.005 behavior) and will break ByteLoader. +#BUILDOPT += -DPERL_TEXTMODE_SCRIPTS + +# +# specify semicolon-separated list of extra directories that modules will +# look for libraries (spaces in path names need not be quoted) +# +EXTRALIBDIRS *= + +# +# set this to point to cmd.exe (only needed if you use some +# alternate shell that doesn't grok cmd.exe style commands) +# +#SHELL *= g:\winnt\system32\cmd.exe + +# +# set this to your email address (perl will guess a value from +# from your loginname and your hostname, which may not be right) +# +#EMAIL *= + +## +## Build configuration ends. +## + +##################### CHANGE THESE ONLY IF YOU MUST ##################### + +.IF "$(CRYPT_SRC)$(CRYPT_LIB)" == "" +D_CRYPT = undef +.ELSE +D_CRYPT = define +CRYPT_FLAG = -DHAVE_DES_FCRYPT +.ENDIF + +.IF "$(USE_OBJECT)" == "define" +PERL_MALLOC != undef +USE_5005THREADS != undef +USE_MULTI != undef +USE_IMP_SYS != define +.ENDIF + +PERL_MALLOC *= undef + +USE_5005THREADS *= undef + +.IF "$(USE_5005THREADS)" == "define" +USE_ITHREADS != undef +.ENDIF + +.IF "$(USE_IMP_SYS)" == "define" +PERL_MALLOC != undef +.ENDIF + +USE_MULTI *= undef +USE_OBJECT *= undef +USE_ITHREADS *= undef +USE_IMP_SYS *= undef +USE_PERLCRT *= undef + +.IF "$(USE_IMP_SYS)$(USE_MULTI)$(USE_5005THREADS)$(USE_OBJECT)" == "defineundefundefundef" +USE_MULTI != define +.ENDIF + +.IF "$(USE_ITHREADS)$(USE_MULTI)$(USE_OBJECT)" == "defineundefundef" +USE_MULTI != define +USE_5005THREADS != undef +.ENDIF + +.IF "$(USE_MULTI)$(USE_5005THREADS)$(USE_OBJECT)" != "undefundefundef" +BUILDOPT += -DPERL_IMPLICIT_CONTEXT +.ENDIF + +.IF "$(USE_IMP_SYS)" != "undef" +BUILDOPT += -DPERL_IMPLICIT_SYS +.ENDIF + +.IMPORT .IGNORE : PROCESSOR_ARCHITECTURE + +PROCESSOR_ARCHITECTURE *= x86 + +.IF "$(USE_OBJECT)" == "define" +ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-object +.ELIF "$(USE_5005THREADS)" == "define" +ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-thread +.ELIF "$(USE_MULTI)" == "define" +ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-multi +.ELSE +ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE) +.ENDIF + +.IF "$(USE_ITHREADS)" == "define" +ARCHNAME !:= $(ARCHNAME)-thread +.ENDIF + +# Visual Studio 98 specific +.IF "$(CCTYPE)" == "MSVC60" + +# VC 6.0 can load the socket dll on demand. Makes the test suite +# run in about 10% less time. +DELAYLOAD *= -DELAYLOAD:wsock32.dll -DELAYLOAD:shell32.dll delayimp.lib + +# VC 6.0 seems capable of compiling perl correctly with optimizations +# enabled. Anything earlier fails tests. +CFG *= Optimize +.ENDIF + +ARCHDIR = ..\lib\$(ARCHNAME) +COREDIR = ..\lib\CORE +AUTODIR = ..\lib\auto +LIBDIR = ..\lib +EXTDIR = ..\ext +PODDIR = ..\pod +EXTUTILSDIR = $(LIBDIR)\ExtUtils + +# +INST_SCRIPT = $(INST_TOP)$(INST_VER)\bin +INST_BIN = $(INST_SCRIPT)$(INST_ARCH) +INST_LIB = $(INST_TOP)$(INST_VER)\lib +INST_ARCHLIB = $(INST_LIB)$(INST_ARCH) +INST_COREDIR = $(INST_ARCHLIB)\CORE +INST_POD = $(INST_LIB)\pod +INST_HTML = $(INST_POD)\html + +# +# Programs to compile, build .lib files and link +# + +.USESHELL : + +.IF "$(CCTYPE)" == "BORLAND" + +CC = bcc32 +LINK32 = tlink32 +LIB32 = tlib /P128 +IMPLIB = implib -c +RSC = rc + +# +# Options +# +INCLUDES = -I$(COREDIR) -I.\include -I. -I.. -I"$(CCINCDIR)" +#PCHFLAGS = -H -Hc -H=c:\temp\bcmoduls.pch +DEFINES = -DWIN32 $(CRYPT_FLAG) +LOCDEFS = -DPERLDLL -DPERL_CORE +SUBSYS = console +CXX_FLAG = -P + +LIBC = cw32mti.lib +LIBFILES = $(CRYPT_LIB) import32.lib $(LIBC) odbc32.lib odbccp32.lib + +.IF "$(CFG)" == "Debug" +OPTIMIZE = -v -D_RTLDLL -DDEBUGGING +LINK_DBG = -v +.ELSE +OPTIMIZE = -O2 -D_RTLDLL +LINK_DBG = +.ENDIF + +CFLAGS = -w -g0 -tWM -tWD $(INCLUDES) $(DEFINES) $(LOCDEFS) \ + $(PCHFLAGS) $(OPTIMIZE) +LINK_FLAGS = $(LINK_DBG) -L"$(INST_COREDIR)" -L"$(CCLIBDIR)" +OBJOUT_FLAG = -o +EXEOUT_FLAG = -e +LIBOUT_FLAG = + +.ELIF "$(CCTYPE)" == "GCC" + +CC = gcc +LINK32 = gcc +LIB32 = ar rc +IMPLIB = dlltool +RSC = rc + +o = .o +a = .a + +# +# Options +# + +INCLUDES = -I$(COREDIR) -I.\include -I. -I.. +DEFINES = -DWIN32 $(CRYPT_FLAG) +LOCDEFS = -DPERLDLL -DPERL_CORE +SUBSYS = console +CXX_FLAG = -xc++ + +LIBC = -lmsvcrt + +# same libs as MSVC +LIBFILES = $(CRYPT_LIB) $(LIBC) \ + -lmoldname -lkernel32 -luser32 -lgdi32 \ + -lwinspool -lcomdlg32 -ladvapi32 -lshell32 -lole32 \ + -loleaut32 -lnetapi32 -luuid -lwsock32 -lmpr \ + -lwinmm -lversion -lodbc32 + +.IF "$(CFG)" == "Debug" +OPTIMIZE = -g -DDEBUGGING +LINK_DBG = -g +.ELSE +OPTIMIZE = -g -O2 +LINK_DBG = +.ENDIF + +CFLAGS = $(INCLUDES) $(DEFINES) $(LOCDEFS) $(OPTIMIZE) +LINK_FLAGS = $(LINK_DBG) -L"$(INST_COREDIR)" -L"$(CCLIBDIR)" +OBJOUT_FLAG = -o +EXEOUT_FLAG = -o +LIBOUT_FLAG = + +# NOTE: we assume that GCC uses MSVCRT.DLL +BUILDOPT += -fno-strict-aliasing -DPERL_MSVCRT_READFIX + +.ELSE + +CC = cl +LINK32 = link +LIB32 = $(LINK32) -lib +RSC = rc + +# +# Options +# + +INCLUDES = -I$(COREDIR) -I.\include -I. -I.. +#PCHFLAGS = -Fpc:\temp\vcmoduls.pch -YX +DEFINES = -DWIN32 -D_CONSOLE -DNO_STRICT $(CRYPT_FLAG) +LOCDEFS = -DPERLDLL -DPERL_CORE +SUBSYS = console +CXX_FLAG = -TP -GX + +.IF "$(USE_PERLCRT)" != "define" +LIBC = msvcrt.lib +.ELSE +LIBC = PerlCRT.lib +.ENDIF + +PERLEXE_RES = +PERLDLL_RES = + +.IF "$(CFG)" == "Debug" +.IF "$(CCTYPE)" == "MSVC20" +OPTIMIZE = -Od -MD -Z7 -DDEBUGGING +.ELSE +OPTIMIZE = -Od -MD -Zi -DDEBUGGING +.ENDIF +LINK_DBG = -debug -pdb:none +.ELSE +.IF "$(CFG)" == "Optimize" +# -O1 yields smaller code, which turns out to be faster than -O2 +#OPTIMIZE = -O2 -MD -DNDEBUG +OPTIMIZE = -O1 -MD -DNDEBUG +.ELSE +OPTIMIZE = -Od -MD -DNDEBUG +.ENDIF +LINK_DBG = -release +.ENDIF + +LIBBASEFILES = $(CRYPT_LIB) \ + oldnames.lib kernel32.lib user32.lib gdi32.lib winspool.lib \ + comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib \ + netapi32.lib uuid.lib wsock32.lib mpr.lib winmm.lib \ + version.lib odbc32.lib odbccp32.lib + +# we add LIBC here, since we may be using PerlCRT.dll +LIBFILES = $(LIBBASEFILES) $(LIBC) + +CFLAGS = -nologo -Gf -W3 $(INCLUDES) $(DEFINES) $(LOCDEFS) \ + $(PCHFLAGS) $(OPTIMIZE) +LINK_FLAGS = -nologo -nodefaultlib $(LINK_DBG) \ + -libpath:"$(INST_COREDIR)" \ + -machine:$(PROCESSOR_ARCHITECTURE) +OBJOUT_FLAG = -Fo +EXEOUT_FLAG = -Fe +LIBOUT_FLAG = /out: + +.IF "$(USE_PERLCRT)" != "define" +BUILDOPT += -DPERL_MSVCRT_READFIX +.ENDIF + +.ENDIF + +.IF "$(USE_OBJECT)" == "define" +OPTIMIZE += $(CXX_FLAG) +BUILDOPT += -DPERL_OBJECT +.ENDIF + +CFLAGS_O = $(CFLAGS) $(BUILDOPT) + +# used to allow local linking flags that are not propogated into Config.pm, +# currently unused +# -- BKS, 12-12-1999 +PRIV_LINK_FLAGS *= +BLINK_FLAGS = $(PRIV_LINK_FLAGS) $(LINK_FLAGS) + +#################### do not edit below this line ####################### +############# NO USER-SERVICEABLE PARTS BEYOND THIS POINT ############## + +o *= .obj +a *= .lib + +LKPRE = INPUT ( +LKPOST = ) + +# +# Rules +# + +.SUFFIXES : .c $(o) .dll $(a) .exe .rc .res + +.c$(o): + $(CC) -c $(null,$(<:d) $(NULL) -I$(<:d)) $(CFLAGS_O) $(OBJOUT_FLAG)$@ $< + +.y.c: + $(NOOP) + +$(o).dll: +.IF "$(CCTYPE)" == "BORLAND" + $(LINK32) -Tpd -ap $(BLINK_FLAGS) c0d32$(o) $<,$@,,$(LIBFILES),$(*B).def + $(IMPLIB) $(*B).lib $@ +.ELIF "$(CCTYPE)" == "GCC" + $(LINK32) -o $@ $(BLINK_FLAGS) $< $(LIBFILES) + $(IMPLIB) --input-def $(*B).def --output-lib $(*B).a $@ +.ELSE + $(LINK32) -dll -subsystem:windows -implib:$(*B).lib -def:$(*B).def \ + -out:$@ $(BLINK_FLAGS) $(LIBFILES) $< $(LIBPERL) +.ENDIF + +.rc.res: + $(RSC) -i.. $< + +# +# various targets +MINIPERL = ..\miniperl.exe +MINIDIR = .\mini +PERLEXE = ..\perl.exe +WPERLEXE = ..\wperl.exe +GLOBEXE = ..\perlglob.exe +CONFIGPM = ..\lib\Config.pm +MINIMOD = ..\lib\ExtUtils\Miniperl.pm +X2P = ..\x2p\a2p.exe + +PL2BAT = bin\pl2bat.pl +GLOBBAT = bin\perlglob.bat + +UTILS = \ + ..\utils\h2ph \ + ..\utils\splain \ + ..\utils\dprofpp \ + ..\utils\perlbug \ + ..\utils\pl2pm \ + ..\utils\c2ph \ + ..\utils\h2xs \ + ..\utils\perldoc \ + ..\utils\perlcc \ + ..\pod\checkpods \ + ..\pod\pod2html \ + ..\pod\pod2latex \ + ..\pod\pod2man \ + ..\pod\pod2text \ + ..\pod\pod2usage \ + ..\pod\podchecker \ + ..\pod\podselect \ + ..\x2p\find2perl \ + ..\x2p\s2p \ + bin\exetype.pl \ + bin\runperl.pl \ + bin\pl2bat.pl \ + bin\perlglob.pl \ + bin\search.pl + +.IF "$(CCTYPE)" == "BORLAND" + +CFGSH_TMPL = config.bc +CFGH_TMPL = config_H.bc + +.ELIF "$(CCTYPE)" == "GCC" + +CFGSH_TMPL = config.gc +CFGH_TMPL = config_H.gc +PERLIMPLIB = ..\libperl56$(a) + +.ELSE + +CFGSH_TMPL = config.vc +CFGH_TMPL = config_H.vc + +.ENDIF + +PERLIMPLIB *= ..\perl56$(a) +PERLDLL = ..\perl56.dll + +XCOPY = xcopy /f /r /i /d +RCOPY = xcopy /f /r /i /e /d +NOOP = @echo + +# +# filenames given to xsubpp must have forward slashes (since it puts +# full pathnames in #line strings) +XSUBPP = ..\$(MINIPERL) -I..\..\lib ..\$(EXTUTILSDIR)\xsubpp \ + -C++ -prototypes + +MICROCORE_SRC = \ + ..\av.c \ + ..\deb.c \ + ..\doio.c \ + ..\doop.c \ + ..\dump.c \ + ..\globals.c \ + ..\gv.c \ + ..\hv.c \ + ..\mg.c \ + ..\op.c \ + ..\perl.c \ + ..\perlapi.c \ + ..\perly.c \ + ..\pp.c \ + ..\pp_ctl.c \ + ..\pp_hot.c \ + ..\pp_sys.c \ + ..\regcomp.c \ + ..\regexec.c \ + ..\run.c \ + ..\scope.c \ + ..\sv.c \ + ..\taint.c \ + ..\toke.c \ + ..\universal.c \ + ..\utf8.c \ + ..\util.c \ + ..\xsutils.c + +EXTRACORE_SRC += perllib.c + +.IF "$(PERL_MALLOC)" == "define" +EXTRACORE_SRC += ..\malloc.c +.ENDIF + +.IF "$(USE_OBJECT)" != "define" +EXTRACORE_SRC += ..\perlio.c +.ENDIF + +WIN32_SRC = \ + .\win32.c \ + .\win32sck.c \ + .\win32thread.c + +.IF "$(CRYPT_SRC)" != "" +WIN32_SRC += .\$(CRYPT_SRC) +.ENDIF + +DLL_SRC = $(DYNALOADER).c + +X2P_SRC = \ + ..\x2p\a2p.c \ + ..\x2p\hash.c \ + ..\x2p\str.c \ + ..\x2p\util.c \ + ..\x2p\walk.c + +CORE_NOCFG_H = \ + ..\av.h \ + ..\cop.h \ + ..\cv.h \ + ..\dosish.h \ + ..\embed.h \ + ..\form.h \ + ..\gv.h \ + ..\handy.h \ + ..\hv.h \ + ..\iperlsys.h \ + ..\mg.h \ + ..\nostdio.h \ + ..\op.h \ + ..\opcode.h \ + ..\perl.h \ + ..\perlapi.h \ + ..\perlsdio.h \ + ..\perlsfio.h \ + ..\perly.h \ + ..\pp.h \ + ..\proto.h \ + ..\regexp.h \ + ..\scope.h \ + ..\sv.h \ + ..\thread.h \ + ..\unixish.h \ + ..\utf8.h \ + ..\util.h \ + ..\warnings.h \ + ..\XSUB.h \ + ..\EXTERN.h \ + ..\perlvars.h \ + ..\intrpvar.h \ + ..\thrdvar.h \ + .\include\dirent.h \ + .\include\netdb.h \ + .\include\sys\socket.h \ + .\win32.h + +CORE_H = $(CORE_NOCFG_H) .\config.h + +MICROCORE_OBJ = $(MICROCORE_SRC:db:+$(o)) +CORE_OBJ = $(MICROCORE_OBJ) $(EXTRACORE_SRC:db:+$(o)) +WIN32_OBJ = $(WIN32_SRC:db:+$(o)) +MINICORE_OBJ = $(MINIDIR)\{$(MICROCORE_OBJ:f) miniperlmain$(o) perlio$(o)} +MINIWIN32_OBJ = $(MINIDIR)\{$(WIN32_OBJ:f)} +MINI_OBJ = $(MINICORE_OBJ) $(MINIWIN32_OBJ) +DLL_OBJ = $(DLL_SRC:db:+$(o)) +X2P_OBJ = $(X2P_SRC:db:+$(o)) + +PERLDLL_OBJ = $(CORE_OBJ) +PERLEXE_OBJ = perlmain$(o) + +PERLDLL_OBJ += $(WIN32_OBJ) $(DLL_OBJ) + +.IF "$(USE_SETARGV)" != "" +SETARGV_OBJ = setargv$(o) +.ENDIF + +DYNAMIC_EXT = Socket IO Fcntl Opcode SDBM_File POSIX attrs Thread B re \ + Data/Dumper Devel/Peek ByteLoader Devel/DProf File/Glob \ + Sys/Hostname Storable +STATIC_EXT = DynaLoader +NONXS_EXT = Errno + +DYNALOADER = $(EXTDIR)\DynaLoader\DynaLoader +SOCKET = $(EXTDIR)\Socket\Socket +FCNTL = $(EXTDIR)\Fcntl\Fcntl +OPCODE = $(EXTDIR)\Opcode\Opcode +SDBM_FILE = $(EXTDIR)\SDBM_File\SDBM_File +IO = $(EXTDIR)\IO\IO +POSIX = $(EXTDIR)\POSIX\POSIX +ATTRS = $(EXTDIR)\attrs\attrs +THREAD = $(EXTDIR)\Thread\Thread +B = $(EXTDIR)\B\B +RE = $(EXTDIR)\re\re +DUMPER = $(EXTDIR)\Data\Dumper\Dumper +ERRNO = $(EXTDIR)\Errno\Errno +PEEK = $(EXTDIR)\Devel\Peek\Peek +BYTELOADER = $(EXTDIR)\ByteLoader\ByteLoader +DPROF = $(EXTDIR)\Devel\DProf\DProf +GLOB = $(EXTDIR)\File\Glob\Glob +HOSTNAME = $(EXTDIR)\Sys\Hostname\Hostname +STORABLE = $(EXTDIR)\Storable\Storable + +SOCKET_DLL = $(AUTODIR)\Socket\Socket.dll +FCNTL_DLL = $(AUTODIR)\Fcntl\Fcntl.dll +OPCODE_DLL = $(AUTODIR)\Opcode\Opcode.dll +SDBM_FILE_DLL = $(AUTODIR)\SDBM_File\SDBM_File.dll +IO_DLL = $(AUTODIR)\IO\IO.dll +POSIX_DLL = $(AUTODIR)\POSIX\POSIX.dll +ATTRS_DLL = $(AUTODIR)\attrs\attrs.dll +THREAD_DLL = $(AUTODIR)\Thread\Thread.dll +B_DLL = $(AUTODIR)\B\B.dll +DUMPER_DLL = $(AUTODIR)\Data\Dumper\Dumper.dll +PEEK_DLL = $(AUTODIR)\Devel\Peek\Peek.dll +RE_DLL = $(AUTODIR)\re\re.dll +BYTELOADER_DLL = $(AUTODIR)\ByteLoader\ByteLoader.dll +DPROF_DLL = $(AUTODIR)\Devel\DProf\DProf.dll +GLOB_DLL = $(AUTODIR)\File\Glob\Glob.dll +HOSTNAME_DLL = $(AUTODIR)\Sys\Hostname\Hostname.dll +STORABLE_DLL = $(AUTODIR)\Storable\Storable.dll + +ERRNO_PM = $(LIBDIR)\Errno.pm + +EXTENSION_C = \ + $(SOCKET).c \ + $(FCNTL).c \ + $(OPCODE).c \ + $(SDBM_FILE).c \ + $(IO).c \ + $(POSIX).c \ + $(ATTRS).c \ + $(THREAD).c \ + $(RE).c \ + $(DUMPER).c \ + $(PEEK).c \ + $(B).c \ + $(BYTELOADER).c \ + $(DPROF).c \ + $(GLOB).c \ + $(HOSTNAME).c \ + $(STORABLE).c + +EXTENSION_DLL = \ + $(SOCKET_DLL) \ + $(FCNTL_DLL) \ + $(OPCODE_DLL) \ + $(SDBM_FILE_DLL)\ + $(IO_DLL) \ + $(POSIX_DLL) \ + $(ATTRS_DLL) \ + $(DUMPER_DLL) \ + $(PEEK_DLL) \ + $(B_DLL) \ + $(RE_DLL) \ + $(THREAD_DLL) \ + $(BYTELOADER_DLL) \ + $(DPROF_DLL) \ + $(GLOB_DLL) \ + $(HOSTNAME_DLL) \ + $(STORABLE_DLL) + +EXTENSION_PM = \ + $(ERRNO_PM) + +POD2HTML = $(PODDIR)\pod2html +POD2MAN = $(PODDIR)\pod2man +POD2LATEX = $(PODDIR)\pod2latex +POD2TEXT = $(PODDIR)\pod2text + +# vars must be separated by "\t+~\t+", since we're using the tempfile +# version of config_sh.pl (we were overflowing someone's buffer by +# trying to fit them all on the command line) +# -- BKS 10-17-1999 +CFG_VARS = \ + INST_DRV=$(INST_DRV) ~ \ + INST_TOP=$(INST_TOP:s/\/\\/) ~ \ + INST_VER=$(INST_VER:s/\/\\/) ~ \ + INST_ARCH=$(INST_ARCH) ~ \ + archname=$(ARCHNAME) ~ \ + cc=$(CC) ~ \ + ccflags=$(OPTIMIZE) $(DEFINES) $(BUILDOPT) ~ \ + cf_email=$(EMAIL) ~ \ + d_crypt=$(D_CRYPT) ~ \ + d_mymalloc=$(PERL_MALLOC) ~ \ + libs=$(LIBFILES:f) ~ \ + incpath=$(CCINCDIR:s/\/\\/) ~ \ + libperl=$(PERLIMPLIB:f) ~ \ + libpth=$(CCLIBDIR:s/\/\\/);$(EXTRALIBDIRS:s/\/\\/) ~ \ + libc=$(LIBC) ~ \ + make=dmake ~ \ + _o=$(o) obj_ext=$(o) ~ \ + _a=$(a) lib_ext=$(a) ~ \ + static_ext=$(STATIC_EXT) ~ \ + dynamic_ext=$(DYNAMIC_EXT) ~ \ + nonxs_ext=$(NONXS_EXT) ~ \ + use5005threads=$(USE_5005THREADS) ~ \ + useithreads=$(USE_ITHREADS) ~ \ + usethreads=$(USE_5005THREADS) ~ \ + usemultiplicity=$(USE_MULTI) ~ \ + LINK_FLAGS=$(LINK_FLAGS:s/\/\\/) ~ \ + optimize=$(OPTIMIZE) + +# +# set up targets varying between Win95 and WinNT builds +# + +.IF "$(IS_WIN95)" == "define" +MK2 = .\makefile.95 +RIGHTMAKE = __switch_makefiles +NOOP = @rem +.ELSE +MK2 = __not_needed +RIGHTMAKE = __not_needed +.ENDIF + +# +# Top targets +# + +all : .\config.h $(GLOBEXE) $(MINIPERL) $(MK2) \ + $(RIGHTMAKE) $(MINIMOD) $(CONFIGPM) $(PERLEXE) \ + $(X2P) $(EXTENSION_DLL) $(EXTENSION_PM) + +$(DYNALOADER)$(o) : $(DYNALOADER).c $(CORE_H) $(EXTDIR)\DynaLoader\dlutils.c + +#---------------------------------------------------------------- + +#-------------------- BEGIN Win95 SPECIFIC ---------------------- + +# this target is a jump-off point for Win95 +# 1. it switches to the Win95-specific makefile if it exists +# (__do_switch_makefiles) +# 2. it prints a message when the Win95-specific one finishes (__done) +# 3. it then kills this makefile by trying to make __no_such_target + +__switch_makefiles: __do_switch_makefiles __done __no_such_target + +__do_switch_makefiles: +.IF "$(NOTFIRST)" != "true" + if exist $(MK2) $(MAKE:s/-S//) -f $(MK2) $(MAKETARGETS) NOTFIRST=true +.ELSE + $(NOOP) +.ENDIF + +.IF "$(NOTFIRST)" != "true" +__done: + @echo Build process complete. Ignore any errors after this message. + @echo Run "dmake test" to test and "dmake install" to install + +.ELSE +# dummy targets for Win95-specific makefile + +__done: + $(NOOP) + +__no_such_target: + $(NOOP) + +.ENDIF + +# This target is used to generate the new makefile (.\makefile.95) for Win95 + +.\makefile.95: .\makefile.mk + $(MINIPERL) genmk95.pl makefile.mk $(MK2) + +#--------------------- END Win95 SPECIFIC --------------------- + +# a blank target for when builds don't need to do certain things +# this target added for Win95 port but used to keep the WinNT port able to +# use this file +__not_needed: + $(NOOP) + +$(GLOBEXE) : perlglob$(o) +.IF "$(CCTYPE)" == "BORLAND" + $(CC) -c -w -v -tWM -I"$(CCINCDIR)" perlglob.c + $(LINK32) -Tpe -ap $(BLINK_FLAGS) c0x32$(o) perlglob$(o) \ + "$(CCLIBDIR)\32BIT\wildargs$(o)",$@,,import32.lib cw32mt.lib, +.ELIF "$(CCTYPE)" == "GCC" + $(LINK32) $(BLINK_FLAGS) -mconsole -o $@ perlglob$(o) $(LIBFILES) +.ELSE + $(LINK32) $(BLINK_FLAGS) $(LIBFILES) -out:$@ -subsystem:$(SUBSYS) \ + perlglob$(o) setargv$(o) +.ENDIF + +perlglob$(o) : perlglob.c + +config.w32 : $(CFGSH_TMPL) + copy $(CFGSH_TMPL) config.w32 + +.\config.h : $(CFGH_TMPL) $(CORE_NOCFG_H) + -del /f config.h + copy $(CFGH_TMPL) config.h + +..\config.sh : config.w32 $(MINIPERL) config_sh.PL + $(MINIPERL) -I..\lib config_sh.PL --cfgsh-option-file \ + $(mktmp $(CFG_VARS)) config.w32 > ..\config.sh + +# this target is for when changes to the main config.sh happen +# edit config.{b,v,g}c and make this target once for each supported +# compiler (e.g. `dmake CCTYPE=BORLAND regen_config_h`) +regen_config_h: + perl config_sh.PL --cfgsh-option-file $(mktmp $(CFG_VARS)) \ + $(CFGSH_TMPL) > ..\config.sh + -cd .. && del /f perl.exe + cd .. && perl configpm + -del /f $(CFGH_TMPL) + -mkdir $(COREDIR) + -perl -I..\lib config_h.PL "INST_VER=$(INST_VER)" + rename config.h $(CFGH_TMPL) + +$(CONFIGPM) : $(MINIPERL) ..\config.sh config_h.PL ..\minimod.pl + cd .. && miniperl configpm + if exist lib\* $(RCOPY) lib\*.* ..\lib\$(NULL) + $(XCOPY) ..\*.h $(COREDIR)\*.* + $(XCOPY) *.h $(COREDIR)\*.* + $(XCOPY) ..\ext\re\re.pm $(LIBDIR)\*.* + $(RCOPY) include $(COREDIR)\*.* + $(MINIPERL) -I..\lib config_h.PL "INST_VER=$(INST_VER)" \ + || $(MAKE) $(MAKEMACROS) $(CONFIGPM) $(MAKEFILE) + +$(MINIPERL) : $(MINIDIR) $(MINI_OBJ) $(CRTIPMLIBS) +.IF "$(CCTYPE)" == "BORLAND" + $(LINK32) -Tpe -ap $(BLINK_FLAGS) \ + @$(mktmp c0x32$(o) $(MINI_OBJ:s,\,\\),$(@:s,\,\\),,$(LIBFILES),) +.ELIF "$(CCTYPE)" == "GCC" + $(LINK32) -v -mconsole -o $@ $(BLINK_FLAGS) \ + $(mktmp $(LKPRE) $(MINI_OBJ:s,\,\\) $(LIBFILES) $(LKPOST)) +.ELSE + $(LINK32) -subsystem:console -out:$@ \ + @$(mktmp $(BLINK_FLAGS) $(LIBFILES) $(MINI_OBJ:s,\,\\)) +.ENDIF + +$(MINIDIR) : + if not exist "$(MINIDIR)" mkdir "$(MINIDIR)" + +$(MINICORE_OBJ) : $(CORE_NOCFG_H) + $(CC) -c $(CFLAGS) -DPERL_EXTERNAL_GLOB $(OBJOUT_FLAG)$@ ..\$(*B).c + +$(MINIWIN32_OBJ) : $(CORE_NOCFG_H) + $(CC) -c $(CFLAGS) $(OBJOUT_FLAG)$@ $(*B).c + +# -DPERL_IMPLICIT_SYS needs C++ for perllib.c +# rules wrapped in .IFs break Win9X build (we end up with unbalanced []s unless +# unless the .IF is true), so instead we use a .ELSE with the default. +# This is the only file that depends on perlhost.h, vmem.h, and vdir.h + +perllib$(o) : perllib.c .\perlhost.h .\vdir.h .\vmem.h +.IF "$(USE_IMP_SYS)$(USE_OBJECT)" == "defineundef" + $(CC) -c -I. $(CFLAGS_O) $(CXX_FLAG) $(OBJOUT_FLAG)$@ perllib.c +.ELSE + $(CC) -c -I. $(CFLAGS_O) $(OBJOUT_FLAG)$@ perllib.c +.ENDIF + +# 1. we don't want to rebuild miniperl.exe when config.h changes +# 2. we don't want to rebuild miniperl.exe with non-default config.h +$(MINI_OBJ) : $(CORE_NOCFG_H) + +$(WIN32_OBJ) : $(CORE_H) +$(CORE_OBJ) : $(CORE_H) +$(DLL_OBJ) : $(CORE_H) +$(X2P_OBJ) : $(CORE_H) + +perldll.def : $(MINIPERL) $(CONFIGPM) ..\global.sym ..\pp.sym ..\makedef.pl + $(MINIPERL) -w ..\makedef.pl PLATFORM=win32 $(OPTIMIZE) $(DEFINES) \ + $(BUILDOPT) CCTYPE=$(CCTYPE) > perldll.def + +$(PERLDLL): perldll.def $(PERLDLL_OBJ) $(PERLDLL_RES) +.IF "$(CCTYPE)" == "BORLAND" + $(LINK32) -Tpd -ap $(BLINK_FLAGS) \ + @$(mktmp c0d32$(o) $(PERLDLL_OBJ:s,\,\\)\n \ + $@,\n \ + $(LIBFILES)\n \ + perldll.def\n) + $(IMPLIB) $*.lib $@ +.ELIF "$(CCTYPE)" == "GCC" + $(LINK32) -mdll -o $@ -Wl,--base-file -Wl,perl.base $(BLINK_FLAGS) \ + $(mktmp $(LKPRE) $(PERLDLL_OBJ:s,\,\\) $(LIBFILES) $(LKPOST)) + dlltool --output-lib $(PERLIMPLIB) \ + --dllname $(PERLDLL:b).dll \ + --def perldll.def \ + --base-file perl.base \ + --output-exp perl.exp + $(LINK32) -mdll -o $@ $(BLINK_FLAGS) \ + $(mktmp $(LKPRE) $(PERLDLL_OBJ:s,\,\\) $(LIBFILES) \ + perl.exp $(LKPOST)) +.ELSE + $(LINK32) -dll -def:perldll.def -out:$@ \ + @$(mktmp -base:0x28000000 $(BLINK_FLAGS) $(DELAYLOAD) $(LIBFILES) \ + $(PERLDLL_RES) $(PERLDLL_OBJ:s,\,\\)) +.ENDIF + $(XCOPY) $(PERLIMPLIB) $(COREDIR) + +$(MINIMOD) : $(MINIPERL) ..\minimod.pl + cd .. && miniperl minimod.pl > lib\ExtUtils\Miniperl.pm + +..\x2p\a2p$(o) : ..\x2p\a2p.c + $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\a2p.c + +..\x2p\hash$(o) : ..\x2p\hash.c + $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\hash.c + +..\x2p\str$(o) : ..\x2p\str.c + $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\str.c + +..\x2p\util$(o) : ..\x2p\util.c + $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\util.c + +..\x2p\walk$(o) : ..\x2p\walk.c + $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\walk.c + +$(X2P) : $(MINIPERL) $(X2P_OBJ) + $(MINIPERL) ..\x2p\find2perl.PL + $(MINIPERL) ..\x2p\s2p.PL +.IF "$(CCTYPE)" == "BORLAND" + $(LINK32) -Tpe -ap $(BLINK_FLAGS) \ + @$(mktmp c0x32$(o) $(X2P_OBJ:s,\,\\),$(@:s,\,\\),,$(LIBFILES),) +.ELIF "$(CCTYPE)" == "GCC" + $(LINK32) -v -o $@ $(BLINK_FLAGS) \ + $(mktmp $(LKPRE) $(X2P_OBJ:s,\,\\) $(LIBFILES) $(LKPOST)) +.ELSE + $(LINK32) -subsystem:console -out:$@ \ + @$(mktmp $(BLINK_FLAGS) $(LIBFILES) $(X2P_OBJ:s,\,\\)) +.ENDIF + +perlmain.c : runperl.c + copy runperl.c perlmain.c + +perlmain$(o) : perlmain.c + $(CC) $(CFLAGS_O) -UPERLDLL $(OBJOUT_FLAG)$@ -c perlmain.c + +$(PERLEXE): $(PERLDLL) $(CONFIGPM) $(PERLEXE_OBJ) $(PERLEXE_RES) +.IF "$(CCTYPE)" == "BORLAND" + $(LINK32) -Tpe -ap $(BLINK_FLAGS) \ + @$(mktmp c0x32$(o) $(PERLEXE_OBJ:s,\,\\)\n \ + $(@:s,\,\\),\n \ + $(PERLIMPLIB) $(LIBFILES)\n) +.ELIF "$(CCTYPE)" == "GCC" + $(LINK32) -mconsole -o $@ $(BLINK_FLAGS) \ + $(PERLEXE_OBJ) $(PERLIMPLIB) $(LIBFILES) +.ELSE + $(LINK32) -subsystem:console -out:$@ -stack:0x1000000 $(BLINK_FLAGS) \ + $(LIBFILES) $(PERLEXE_OBJ) $(SETARGV_OBJ) $(PERLIMPLIB) $(PERLEXE_RES) +.ENDIF + copy $(PERLEXE) $(WPERLEXE) + $(MINIPERL) -I..\lib bin\exetype.pl $(WPERLEXE) WINDOWS + copy splittree.pl .. + $(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR) + +$(DYNALOADER).c: $(MINIPERL) $(EXTDIR)\DynaLoader\dl_win32.xs $(CONFIGPM) + if not exist $(AUTODIR) mkdir $(AUTODIR) + cd $(EXTDIR)\$(*B) && ..\$(MINIPERL) -I..\..\lib $(*B)_pm.PL + cd $(EXTDIR)\$(*B) && ..\$(MINIPERL) -I..\..\lib XSLoader_pm.PL + $(XCOPY) $(EXTDIR)\$(*B)\$(*B).pm $(LIBDIR)\$(NULL) + $(XCOPY) $(EXTDIR)\$(*B)\XSLoader.pm $(LIBDIR)\$(NULL) + cd $(EXTDIR)\$(*B) && $(XSUBPP) dl_win32.xs > $(*B).c + $(XCOPY) $(EXTDIR)\$(*B)\dlutils.c . + +$(EXTDIR)\DynaLoader\dl_win32.xs: dl_win32.xs + copy dl_win32.xs $(EXTDIR)\DynaLoader\dl_win32.xs + +$(DUMPER_DLL): $(PERLEXE) $(DUMPER).xs + cd $(EXTDIR)\Data\$(*B) && \ + ..\..\..\miniperl -I..\..\..\lib Makefile.PL INSTALLDIRS=perl + cd $(EXTDIR)\Data\$(*B) && $(MAKE) + +$(DPROF_DLL): $(PERLEXE) $(DPROF).xs + cd $(EXTDIR)\Devel\$(*B) && \ + ..\..\..\miniperl -I..\..\..\lib Makefile.PL INSTALLDIRS=perl + cd $(EXTDIR)\Devel\$(*B) && $(MAKE) + +$(GLOB_DLL): $(PERLEXE) $(GLOB).xs + cd $(EXTDIR)\File\$(*B) && \ + ..\..\..\miniperl -I..\..\..\lib Makefile.PL INSTALLDIRS=perl + cd $(EXTDIR)\File\$(*B) && $(MAKE) + +$(PEEK_DLL): $(PERLEXE) $(PEEK).xs + cd $(EXTDIR)\Devel\$(*B) && \ + ..\..\..\miniperl -I..\..\..\lib Makefile.PL INSTALLDIRS=perl + cd $(EXTDIR)\Devel\$(*B) && $(MAKE) + +$(RE_DLL): $(PERLEXE) $(RE).xs + cd $(EXTDIR)\$(*B) && \ + ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl + cd $(EXTDIR)\$(*B) && $(MAKE) + +$(B_DLL): $(PERLEXE) $(B).xs + cd $(EXTDIR)\$(*B) && \ + ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl + cd $(EXTDIR)\$(*B) && $(MAKE) + +$(THREAD_DLL): $(PERLEXE) $(THREAD).xs + cd $(EXTDIR)\$(*B) && \ + ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl + cd $(EXTDIR)\$(*B) && $(MAKE) + +$(ATTRS_DLL): $(PERLEXE) $(ATTRS).xs + cd $(EXTDIR)\$(*B) && \ + ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl + cd $(EXTDIR)\$(*B) && $(MAKE) + +$(POSIX_DLL): $(PERLEXE) $(POSIX).xs + cd $(EXTDIR)\$(*B) && \ + ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl + cd $(EXTDIR)\$(*B) && $(MAKE) + +$(IO_DLL): $(PERLEXE) $(IO).xs + cd $(EXTDIR)\$(*B) && \ + ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl + cd $(EXTDIR)\$(*B) && $(MAKE) + +$(SDBM_FILE_DLL) : $(PERLEXE) $(SDBM_FILE).xs + cd $(EXTDIR)\$(*B) && \ + ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl + cd $(EXTDIR)\$(*B) && $(MAKE) + +$(FCNTL_DLL): $(PERLEXE) $(FCNTL).xs + cd $(EXTDIR)\$(*B) && \ + ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl + cd $(EXTDIR)\$(*B) && $(MAKE) + +$(OPCODE_DLL): $(PERLEXE) $(OPCODE).xs + cd $(EXTDIR)\$(*B) && \ + ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl + cd $(EXTDIR)\$(*B) && $(MAKE) + +$(SOCKET_DLL): $(PERLEXE) $(SOCKET).xs + cd $(EXTDIR)\$(*B) && \ + ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl + cd $(EXTDIR)\$(*B) && $(MAKE) + +$(HOSTNAME_DLL): $(PERLEXE) $(HOSTNAME).xs + cd $(EXTDIR)\Sys\$(*B) && \ + ..\..\..\miniperl -I..\..\..\lib Makefile.PL INSTALLDIRS=perl + cd $(EXTDIR)\Sys\$(*B) && $(MAKE) + +$(BYTELOADER_DLL): $(PERLEXE) $(BYTELOADER).xs + cd $(EXTDIR)\$(*B) && \ + ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl + cd $(EXTDIR)\$(*B) && $(MAKE) + +$(STORABLE_DLL): $(PERLEXE) $(STORABLE).xs + cd $(EXTDIR)\$(*B) && \ + ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl + cd $(EXTDIR)\$(*B) && $(MAKE) + +$(ERRNO_PM): $(PERLEXE) $(ERRNO)_pm.PL + cd $(EXTDIR)\$(*B) && \ + ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl + cd $(EXTDIR)\$(*B) && $(MAKE) + +doc: $(PERLEXE) + $(PERLEXE) -I..\lib ..\installhtml --podroot=.. --htmldir=./html \ + --podpath=pod:lib:ext:utils --htmlroot="file://$(INST_HTML:s,:,|,)"\ + --libpod=perlfunc:perlguts:perlvar:perlrun:perlop --recurse + +utils: $(PERLEXE) $(X2P) + cd ..\utils && $(MAKE) PERL=$(MINIPERL) + copy ..\README.amiga ..\pod\perlamiga.pod + copy ..\README.cygwin ..\pod\perlcygwin.pod + copy ..\README.dos ..\pod\perldos.pod + copy ..\README.hpux ..\pod\perlhpux.pod + copy ..\README.machten ..\pod\perlmachten.pod + copy ..\README.os2 ..\pod\perlos2.pod + copy ..\README.os2 ..\pod\perlos2.pod + copy ..\vms\perlvms.pod ..\pod\perlvms.pod + cd ..\pod && $(MAKE) -f ..\win32\pod.mak converters + cd ..\lib && $(PERLEXE) lib_pm.PL + $(PERLEXE) $(PL2BAT) $(UTILS) + +distclean: clean + -del /f $(MINIPERL) $(PERLEXE) $(PERLDLL) $(GLOBEXE) \ + $(PERLIMPLIB) ..\miniperl$(a) $(MINIMOD) + -del /f *.def *.map + -del /f $(EXTENSION_DLL) $(EXTENSION_PM) + -del /f $(EXTENSION_C) $(DYNALOADER).c $(ERRNO).pm + -del /f $(EXTDIR)\DynaLoader\dl_win32.xs + -del /f $(LIBDIR)\.exists $(LIBDIR)\attrs.pm $(LIBDIR)\DynaLoader.pm + -del /f $(LIBDIR)\XSLoader.pm + -del /f $(LIBDIR)\Fcntl.pm $(LIBDIR)\IO.pm $(LIBDIR)\Opcode.pm + -del /f $(LIBDIR)\ops.pm $(LIBDIR)\Safe.pm $(LIBDIR)\Thread.pm + -del /f $(LIBDIR)\SDBM_File.pm $(LIBDIR)\Socket.pm $(LIBDIR)\POSIX.pm + -del /f $(LIBDIR)\B.pm $(LIBDIR)\O.pm $(LIBDIR)\re.pm + -del /f $(LIBDIR)\Data\Dumper.pm $(LIBDIR)\ByteLoader.pm + -del /f $(LIBDIR)\Devel\Peek.pm $(LIBDIR)\Devel\DProf.pm + -del /f $(LIBDIR)\File\Glob.pm + -del /f $(LIBDIR)\Storable.pm + -if exist $(LIBDIR)\IO rmdir /s /q $(LIBDIR)\IO || rmdir /s $(LIBDIR)\IO + -if exist $(LIBDIR)\Thread rmdir /s /q $(LIBDIR)\Thread || rmdir /s $(LIBDIR)\Thread + -if exist $(LIBDIR)\B rmdir /s /q $(LIBDIR)\B || rmdir /s $(LIBDIR)\B + -if exist $(LIBDIR)\Data rmdir /s /q $(LIBDIR)\Data || rmdir /s $(LIBDIR)\Data + -del /f $(PODDIR)\*.html + -del /f $(PODDIR)\*.bat + -cd ..\utils && del /f h2ph splain perlbug pl2pm c2ph h2xs perldoc \ + dprofpp *.bat + -cd ..\x2p && del /f find2perl s2p *.bat + -del /f ..\config.sh ..\splittree.pl perlmain.c dlutils.c config.h.new + -del /f $(CONFIGPM) + -del /f bin\*.bat + -cd $(EXTDIR) && del /s *$(a) *.def *.map *.pdb *.bs Makefile *$(o) \ + pm_to_blib + -if exist $(AUTODIR) rmdir /s /q $(AUTODIR) || rmdir /s $(AUTODIR) + -if exist $(COREDIR) rmdir /s /q $(COREDIR) || rmdir /s $(COREDIR) + +install : all installbare installhtml + +installbare : $(RIGHTMAKE) utils + $(PERLEXE) ..\installperl + if exist $(WPERLEXE) $(XCOPY) $(WPERLEXE) $(INST_BIN)\*.* + $(XCOPY) $(GLOBEXE) $(INST_BIN)\*.* + $(XCOPY) bin\*.bat $(INST_SCRIPT)\*.* + +installhtml : doc + $(RCOPY) html\*.* $(INST_HTML)\*.* + +inst_lib : $(CONFIGPM) + copy splittree.pl .. + $(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR) + $(RCOPY) ..\lib $(INST_LIB)\*.* + +minitest : $(MINIPERL) $(GLOBEXE) $(CONFIGPM) utils + $(XCOPY) $(MINIPERL) ..\t\perl.exe +.IF "$(CCTYPE)" == "BORLAND" + $(XCOPY) $(GLOBBAT) ..\t\$(NULL) +.ELSE + $(XCOPY) $(GLOBEXE) ..\t\$(NULL) +.ENDIF + attrib -r ..\t\*.* + copy test ..\t + cd ..\t && \ + $(MINIPERL) -I..\lib test base/*.t comp/*.t cmd/*.t io/*.t op/*.t pragma/*.t + +test-prep : all utils + $(XCOPY) $(PERLEXE) ..\t\$(NULL) + $(XCOPY) $(PERLDLL) ..\t\$(NULL) +.IF "$(CCTYPE)" == "BORLAND" + $(XCOPY) $(GLOBBAT) ..\t\$(NULL) +.ELSE + $(XCOPY) $(GLOBEXE) ..\t\$(NULL) +.ENDIF + +test : $(RIGHTMAKE) test-prep + cd ..\t && $(PERLEXE) -I..\lib harness + +test-notty : test-prep + set PERL_SKIP_TTY_TEST=1 && \ + cd ..\t && $(PERLEXE) -I.\lib harness + +test-wide : test-prep + set HARNESS_PERL_SWITCHES=-C && \ + cd ..\t && $(PERLEXE) -I..\lib harness + +test-wide-notty : test-prep + set PERL_SKIP_TTY_TEST=1 && \ + set HARNESS_PERL_SWITCHES=-C && \ + cd ..\t && $(PERLEXE) -I..\lib harness + +clean : + -@erase miniperlmain$(o) + -@erase $(MINIPERL) + -@erase perlglob$(o) + -@erase perlmain$(o) + -@erase config.w32 + -@erase /f config.h + -@erase $(GLOBEXE) + -@erase $(PERLEXE) + -@erase $(WPERLEXE) + -@erase $(PERLDLL) + -@erase $(CORE_OBJ) + -if exist $(MINIDIR) rmdir /s /q $(MINIDIR) || rmdir /s $(MINIDIR) + -@erase $(WIN32_OBJ) + -@erase $(DLL_OBJ) + -@erase $(X2P_OBJ) + -@erase ..\*$(o) ..\*$(a) ..\*.exp *$(o) *$(a) *.exp *.res + -@erase ..\t\*.exe ..\t\*.dll ..\t\*.bat + -@erase ..\x2p\*.exe ..\x2p\*.bat + -@erase *.ilk + -@erase *.pdb + +# Handy way to run perlbug -ok without having to install and run the +# installed perlbug. We don't re-run the tests here - we trust the user. +# Please *don't* use this unless all tests pass. +# If you want to report test failures, use "dmake nok" instead. +ok: utils + $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)" + +okfile: utils + $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)" -F perl.ok + +nok: utils + $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)" + +nokfile: utils + $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)" -F perl.nok