From: Perl 5 Porters Date: Sat, 24 Aug 1996 22:16:23 +0000 (+0000) Subject: perl 5.003_03: config_H X-Git-Url: http://git.shadowcat.co.uk/gitweb/gitweb.cgi?a=commitdiff_plain;h=9003a52329b06e192c972632de380bcd51cc2086;p=p5sagit%2Fp5-mst-13.2.git perl 5.003_03: config_H Updated to match current Configure and config_h.SH. Some rearrangement of parts has occurred due to new dependencies in the metaconfig units. --- diff --git a/config_H b/config_H index 0b87638..d36ede2 100644 --- a/config_H +++ b/config_H @@ -14,9 +14,9 @@ * $Id: Config_h.U,v 3.0.1.4 1995/09/25 09:10:49 ram Exp $ */ -/* Configuration time: Mon Mar 18 23:11:24 EST 1996 - * Configured by: bailey - * Target system: sunos agave.humgen.upenn.edu 5.4 generic_101945-13 sun4m sparc +/* Configuration time: Fri Aug 23 15:12:57 EDT 1996 + * Configured by: doughera + * Target system: sunos fractal 5.5 generic i86pc i386 i86pc */ #ifndef _config_h_ @@ -32,7 +32,7 @@ * This symbol holds the path of the bin directory where the package will * be installed. Program must be prepared to deal with ~name substitution. */ -#define BIN "/usr/local/bin" /**/ +#define BIN "/opt/perl/bin" /**/ /* CAT2: * This macro catenates 2 tokens together. @@ -95,19 +95,19 @@ * This symbol is defined if the bcmp() routine is available to * compare blocks of memory. */ -/*#define HAS_BCMP /**/ +#define HAS_BCMP /**/ /* HAS_BCOPY: * This symbol is defined if the bcopy() routine is available to * copy blocks of memory. */ -/*#define HAS_BCOPY /**/ +#define HAS_BCOPY /**/ /* HAS_BZERO: * This symbol is defined if the bzero() routine is available to * set a memory block to 0. */ -/*#define HAS_BZERO /**/ +#define HAS_BZERO /**/ /* CASTI32: * This symbol is defined if the C compiler can cast negative @@ -300,7 +300,7 @@ * This symbol, if defined, indicates that the getpriority routine is * available to get a process's priority. */ -/*#define HAS_GETPRIORITY /**/ +#define HAS_GETPRIORITY /**/ /* HAS_HTONL: * This symbol, if defined, indicates that the htonl() routine (and @@ -338,7 +338,7 @@ * to kill process groups. If unavailable, you probably should use kill * with a negative process number. */ -/*#define HAS_KILLPG /**/ +#define HAS_KILLPG /**/ /* HAS_LINK: * This symbol, if defined, indicates that the link routine is @@ -529,7 +529,7 @@ * probably use memmove() or memcpy(). If neither is defined, roll your * own version. */ -/*#define HAS_SAFE_BCOPY /**/ +#define HAS_SAFE_BCOPY /**/ /* HAS_SAFE_MEMCPY: * This symbol, if defined, indicates that the memcpy routine is available @@ -569,7 +569,7 @@ * available to change stderr or stdout from block-buffered or unbuffered * to a line-buffered mode. */ -/*#define HAS_SETLINEBUF /**/ +#define HAS_SETLINEBUF /**/ /* HAS_SETLOCALE: * This symbol, if defined, indicates that the setlocale routine is @@ -605,7 +605,7 @@ * This symbol, if defined, indicates that the setpriority routine is * available to set a process's priority. */ -/*#define HAS_SETPRIORITY /**/ +#define HAS_SETPRIORITY /**/ /* HAS_SETREGID: * This symbol, if defined, indicates that the setregid routine is @@ -617,7 +617,7 @@ * available to change the real, effective and saved gid of the current * process. */ -/*#define HAS_SETREGID /**/ +#define HAS_SETREGID /**/ /*#define HAS_SETRESGID /**/ /* HAS_SETREUID: @@ -630,7 +630,7 @@ * available to change the real, effective and saved uid of the current * process. */ -/*#define HAS_SETREUID /**/ +#define HAS_SETREUID /**/ /*#define HAS_SETRESUID /**/ /* HAS_SETRGID: @@ -701,18 +701,6 @@ * and FILE_cnt(fp) macros will also be defined and should be used * to access these fields. */ -/* USE_STDIO_BASE: - * This symbol is defined if the _base field (or similar) of the - * stdio FILE structure can be used to access the stdio buffer for - * a file handle. If this is defined, then the FILE_base(fp) macro - * will also be defined and should be used to access this field. - * Also, the FILE_bufsiz(fp) macro will be defined and should be used - * to determine the number of bytes in the buffer. USE_STDIO_BASE - * will never be defined unless USE_STDIO_PTR is. - */ -#define USE_STDIO_PTR /**/ -#define USE_STDIO_BASE /**/ - /* FILE_ptr: * This macro is used to access the _ptr field (or equivalent) of the * FILE structure pointed to by its argument. This macro will always be @@ -731,13 +719,33 @@ * This symbol is defined if the FILE_cnt macro can be used as an * lvalue. */ +/* FILE_filbuf: + * This macro is used to access the internal stdio _filbuf function + * (or equivalent), if STDIO_CNT_LVALUE and STDIO_PTR_LVALUE + * are defined. It is typically either _filbuf or __filbuf. + * This macro will only be defined if both STDIO_CNT_LVALUE and + * STDIO_PTR_LVALUE are defined. + */ +#define USE_STDIO_PTR /**/ #ifdef USE_STDIO_PTR #define FILE_ptr(fp) ((fp)->_ptr) #define STDIO_PTR_LVALUE /**/ #define FILE_cnt(fp) ((fp)->_cnt) #define STDIO_CNT_LVALUE /**/ +#if defined(STDIO_PTR_LVALUE) && defined(STDIO_CNT_LVALUE) +#define FILE_filbuf(fp) _filbuf(fp) /**/ +#endif #endif +/* USE_STDIO_BASE: + * This symbol is defined if the _base field (or similar) of the + * stdio FILE structure can be used to access the stdio buffer for + * a file handle. If this is defined, then the FILE_base(fp) macro + * will also be defined and should be used to access this field. + * Also, the FILE_bufsiz(fp) macro will be defined and should be used + * to determine the number of bytes in the buffer. USE_STDIO_BASE + * will never be defined unless USE_STDIO_PTR is. + */ /* FILE_base: * This macro is used to access the _base field (or equivalent) of the * FILE structure pointed to by its argument. This macro will always be @@ -749,6 +757,7 @@ * structure pointed to its argument. This macro will always be defined * if USE_STDIO_BASE is defined. */ +#define USE_STDIO_BASE /**/ #ifdef USE_STDIO_BASE #define FILE_base(fp) ((fp)->_base) #define FILE_bufsiz(fp) ((fp)->_cnt + (fp)->_ptr - (fp)->_base) @@ -911,7 +920,7 @@ /* HAS_WAIT4: * This symbol, if defined, indicates that wait4() exists. */ -/*#define HAS_WAIT4 /**/ +#define HAS_WAIT4 /**/ /* HAS_WAITPID: * This symbol, if defined, indicates that the waitpid routine is @@ -1137,6 +1146,12 @@ */ #define I_SYS_PARAM /**/ +/* I_SYS_RESOURCE: + * This symbol, if defined, indicates to the C program that it should + * include . + */ +#define I_SYS_RESOURCE /**/ + /* I_SYS_SELECT: * This symbol, if defined, indicates to the C program that it should * include in order to get definition of struct timeval. @@ -1161,6 +1176,12 @@ */ #define I_SYS_UN /**/ +/* I_SYS_WAIT: + * This symbol, if defined, indicates to the C program that it should + * include . + */ +#define I_SYS_WAIT /**/ + /* I_TERMIO: * This symbol, if defined, indicates that the program should include * rather than . There are also differences in @@ -1209,12 +1230,29 @@ */ #define I_UTIME /**/ +/* I_STDARG: + * This symbol, if defined, indicates that exists and should + * be included. + */ +/* I_VARARGS: + * This symbol, if defined, indicates to the C program that it should + * include . + */ +#define I_STDARG /**/ +/*#define I_VARARGS /**/ + /* I_VFORK: * This symbol, if defined, indicates to the C program that it should * include vfork.h. */ /*#define I_VFORK /**/ +/* INTSIZE: + * This symbol contains the size of an int, so that the C preprocessor + * can make decisions based on it. + */ +#define INTSIZE 4 /**/ + /* Off_t: * This symbol holds the type used to declare offsets in the kernel. * It can be int, long, off_t, etc... It may be necessary to include @@ -1260,7 +1298,7 @@ * is often a directory that is mounted across diverse architectures. * Programs must be prepared to deal with ~name expansion. */ -#define SCRIPTDIR "/usr/local/script" /**/ +#define SCRIPTDIR "/opt/perl/script" /**/ /* Select_fd_set_t: * This symbol holds the type used for the 2nd, 3rd, and 4th @@ -1278,16 +1316,6 @@ */ #define Size_t size_t /* length paramater for string functions */ -/* SSize_t: - * This symbol holds the type used by functions that return - * a count of bytes or an error condition. It must be a signed type. - * It is usually ssize_t, but may be long or int, etc. - * It may be necessary to include or - * to get any typedef'ed information. - * We will pick a type such that sizeof(SSize_t) == sizeof(Size_t). - */ -#define SSize_t ssize_t /* signed count of bytes */ - /* STDCHAR: * This symbol is defined to be the type of char used in stdio.h. * It has the values "unsigned char" or "char". @@ -1301,34 +1329,56 @@ */ #define Uid_t uid_t /* UID type */ -/* VMS: - * This symbol, if defined, indicates that the program is running under - * VMS. It is currently only set in conjunction with the EUNICE symbol. - */ -/*#define VMS /**/ - /* LOC_SED: * This symbol holds the complete pathname to the sed program. */ #define LOC_SED "/bin/sed" /**/ -/* ARCHLIB_EXP: - * This symbol contains the ~name expanded version of ARCHLIB, to be used - * in programs that are not prepared to deal with ~ expansion at run-time. - */ -#define ARCHLIB_EXP "/usr/local/lib/perl5/i86pc-solaris/5.002" /**/ - /* OSNAME: * This symbol contains the name of the operating system, as determined - * by Configure. + * by Configure. You shouldn't rely on it too much; the specific + * feature tests from Configure are generally more reliable. */ #define OSNAME "solaris" /**/ +/* ARCHLIB: + * This variable, if defined, holds the name of the directory in + * which the user wants to put architecture-dependent public + * library files for perl5. It is most often a local directory + * such as /usr/local/lib. Programs using this variable must be + * prepared to deal with filename expansion. If ARCHLIB is the + * same as PRIVLIB, it is not defined, since presumably the + * program already searches PRIVLIB. + */ +/* ARCHLIB_EXP: + * This symbol contains the ~name expanded version of ARCHLIB, to be used + * in programs that are not prepared to deal with ~ expansion at run-time. + */ +#define ARCHLIB "/opt/perl/lib/i86pc-solaris/5.00303" /**/ +#define ARCHLIB_EXP "/opt/perl/lib/i86pc-solaris/5.00303" /**/ + /* BYTEORDER: - * This symbol hold the hexadecimal constant defined in byteorder, + * This symbol holds the hexadecimal constant defined in byteorder, * i.e. 0x1234 or 0x4321, etc... - */ + * On NeXT 4 (and greater), you can build "Fat" Multiple Architecture + * Binaries (MAB) on either big endian or little endian machines. + * The endian-ness is available at compile-time. This only matters + * for perl, where the config.h can be generated and installed on + * one system, and used by a different architecture to build an + * extension. Older versions of NeXT that might not have + * defined either *_ENDIAN__ were all on Motorola 680x0 series, + * so the default case (for NeXT) is big endian to catch them. + * This might matter for NeXT 3.0. + */ +#ifndef NeXT #define BYTEORDER 0x1234 /* large digits for MSB */ +#else /* NeXT */ +#ifdef __LITTLE_ENDIAN__ +#define BYTEORDER 0x1234 +#else /* __BIG_ENDIAN__ */ +#define BYTEORDER 0x4321 +#endif /* ENDIAN CHECK */ +#endif /* NeXT */ /* CSH: * This symbol, if defined, indicates that the C-shell exists. @@ -1381,26 +1431,34 @@ */ #define Gconvert(x,n,t,b) gconvert((x),(n),(t),(b)) +/* USE_SFIO: + * This symbol, if defined, indicates that sfio should + * be used. + */ +/*#define USE_SFIO /**/ + /* Sigjmp_buf: - * This is the buffer type to be used with Sigsetjmp and Siglongjmp. + * This is the buffer type to be used with Sigsetjmp and Siglongjmp. */ /* Sigsetjmp: - * This macro is used in the same way as sigsetjmp(), but will invoke - * traditional setjmp() if sigsetjmp isn't available. + * This macro is used in the same way as sigsetjmp(), but will invoke + * traditional setjmp() if sigsetjmp isn't available. + * See HAS_SIGSETJMP. */ /* Siglongjmp: - * This macro is used in the same way as siglongjmp(), but will invoke - * traditional longjmp() if siglongjmp isn't available. + * This macro is used in the same way as siglongjmp(), but will invoke + * traditional longjmp() if siglongjmp isn't available. + * See HAS_SIGSETJMP. */ #define HAS_SIGSETJMP /**/ #ifdef HAS_SIGSETJMP #define Sigjmp_buf sigjmp_buf -#define Sigsetjmp(buf,save_mask) sigsetjmp(buf,save_mask) -#define Siglongjmp(buf,retval) siglongjmp(buf,retval) +#define Sigsetjmp(buf,save_mask) sigsetjmp((buf),(save_mask)) +#define Siglongjmp(buf,retval) siglongjmp((buf),(retval)) #else #define Sigjmp_buf jmp_buf -#define Sigsetjmp(buf,save_mask) setjmp(buf) -#define Siglongjmp(buf,retval) longjmp(buf,retval) +#define Sigsetjmp(buf,save_mask) setjmp((buf)) +#define Siglongjmp(buf,retval) longjmp((buf),(retval)) #endif /* USE_DYNAMIC_LOADING: @@ -1426,28 +1484,25 @@ */ #define I_LOCALE /**/ +/* I_SFIO: + * This symbol, if defined, indicates to the C program that it should + * include . + */ +/*#define I_SFIO /**/ + /* I_SYS_STAT: * This symbol, if defined, indicates to the C program that it should * include . */ #define I_SYS_STAT /**/ -/* I_STDARG: - * This symbol, if defined, indicates that exists and should - * be included. - */ -/* I_VARARGS: +/* I_VALUES: * This symbol, if defined, indicates to the C program that it should - * include . + * include to get definition of symbols like MINFLOAT or + * MAXLONG, i.e. machine dependant limitations. Probably, you + * should use instead, if it is available. */ -#define I_STDARG /**/ -/*#define I_VARARGS /**/ - -/* INTSIZE: - * This symbol contains the size of an int, so that the C preprocessor - * can make decisions based on it. - */ -#define INTSIZE 4 /**/ +#define I_VALUES /**/ /* Free_t: * This variable contains the return type of free(). It is usually @@ -1491,18 +1546,41 @@ #define RD_NODATA -1 #define EOF_NONBLOCK +/* OLDARCHLIB: + * This variable, if defined, holds the name of the directory in + * which the user has perl5.000 or perl5.001 architecture-dependent + * public library files for perl5. For the most part, these + * files will work with 5.002 (and later), but that is not + * guaranteed. + */ /* OLDARCHLIB_EXP: * This symbol contains the ~name expanded version of OLDARCHLIB, to be * used in programs that are not prepared to deal with ~ expansion at * run-time. */ +/*#define OLDARCHLIB "" /**/ /*#define OLDARCHLIB_EXP "" /**/ +/* PRIVLIB: + * This symbol contains the name of the private library for this package. + * The library is private in the sense that it needn't be in anyone's + * execution path, but it should be accessible by the world. The program + * should be prepared to do ~ expansion. + */ /* PRIVLIB_EXP: * This symbol contains the ~name expanded version of PRIVLIB, to be used * in programs that are not prepared to deal with ~ expansion at run-time. */ -#define PRIVLIB_EXP "/usr/local/lib/perl5" /**/ +#define PRIVLIB "/opt/perl/lib" /**/ +#define PRIVLIB_EXP "/opt/perl/lib" /**/ + +/* SH_PATH: + * This symbol contains the full pathname to the shell used on this + * on this system to execute Bourne shell scripts. Usually, this will be + * /bin/sh, though it's possible that some systems will have /bin/ksh, + * /bin/pdksh, /bin/ash, /bin/bash, or even something such as D:/bin/sh. + */ +#define SH_PATH "/bin/sh" /**/ /* SIG_NAME: * This symbol contains a list of signal names in order of @@ -1532,32 +1610,64 @@ * The last element is 0, corresponding to the 0 at the end of * the sig_name list. */ -#define SIG_NAME "ZERO","HUP","INT","QUIT","ILL","TRAP","ABRT","EMT","FPE","KILL","BUS","SEGV","SYS","PIPE","ALRM","TERM","USR1","USR2","CHLD","PWR","WINCH","URG","IO","STOP","TSTP","CONT","TTIN","TTOU","VTALRM","PROF","XCPU","XFSZ","WAITING","LWP","FREEZE","THAW","RTMIN","NUM37","NUM38","NUM39","NUM40","NUM41","NUM42","RTMAX","IOT","CLD","POLL",0 /**/ -#define SIG_NUM 0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,6,18,22,0 /**/ +#define SIG_NAME "ZERO","HUP","INT","QUIT","ILL","TRAP","ABRT","EMT","FPE","KILL","BUS","SEGV","SYS","PIPE","ALRM","TERM","USR1","USR2","CHLD","PWR","WINCH","URG","IO","STOP","TSTP","CONT","TTIN","TTOU","VTALRM","PROF","XCPU","XFSZ","WAITING","LWP","FREEZE","THAW","CANCEL","RTMIN","NUM38","NUM39","NUM40","NUM41","NUM42","NUM43","RTMAX","IOT","CLD","POLL",0 /**/ +#define SIG_NUM 0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,6,18,22,0 /**/ +/* SITEARCH: + * This symbol contains the name of the private library for this package. + * The library is private in the sense that it needn't be in anyone's + * execution path, but it should be accessible by the world. The program + * should be prepared to do ~ expansion. + * The standard distribution will put nothing in this directory. + * Individual sites may place their own extensions and modules in + * this directory. + */ /* SITEARCH_EXP: * This symbol contains the ~name expanded version of SITEARCH, to be used * in programs that are not prepared to deal with ~ expansion at run-time. */ -#define SITEARCH_EXP "/usr/local/lib/perl5/site_perl/i86pc-solaris" /**/ +#define SITEARCH "/opt/perl/lib/site_perl/i86pc-solaris" /**/ +#define SITEARCH_EXP "/opt/perl/lib/site_perl/i86pc-solaris" /**/ +/* SITELIB: + * This symbol contains the name of the private library for this package. + * The library is private in the sense that it needn't be in anyone's + * execution path, but it should be accessible by the world. The program + * should be prepared to do ~ expansion. + * The standard distribution will put nothing in this directory. + * Individual sites may place their own extensions and modules in + * this directory. + */ /* SITELIB_EXP: * This symbol contains the ~name expanded version of SITELIB, to be used * in programs that are not prepared to deal with ~ expansion at run-time. */ -#define SITELIB_EXP "/usr/local/lib/perl5/site_perl" /**/ +#define SITELIB "/opt/perl/lib/site_perl" /**/ +#define SITELIB_EXP "/opt/perl/lib/site_perl" /**/ + +/* SSize_t: + * This symbol holds the type used by functions that return + * a count of bytes or an error condition. It must be a signed type. + * It is usually ssize_t, but may be long or int, etc. + * It may be necessary to include or + * to get any typedef'ed information. + * We will pick a type such that sizeof(SSize_t) == sizeof(Size_t). + */ +#define SSize_t ssize_t /* signed count of bytes */ /* STARTPERL: * This variable contains the string to put in front of a perl * script to make sure (one hopes) that it runs with perl and not * some shell. */ -#define STARTPERL "#!/usr/local/bin/perl" /**/ +#define STARTPERL "#!/opt/perl/bin/perl" /**/ -/* BIN_SH: - * This variable contains the path to the shell. +/* USE_PERLIO: + * This symbol, if defined, indicates that the PerlIO abstraction should + * be used throughout. If not defined, stdio should be + * used in a fully backward compatible manner. */ -#define BIN_SH "/bin/sh" /**/ +/*#define USE_PERLIO /**/ /* VOIDFLAGS: * This symbol indicates how much support of the void type is given by this