From: Olaf Flebbe Date: Sun, 27 Jun 1999 20:50:30 +0000 (+0200) Subject: EPOC port to Psion5. X-Git-Url: http://git.shadowcat.co.uk/gitweb/gitweb.cgi?a=commitdiff_plain;h=4d2c4e078e0d58f7b5fd54b2aedc642bb9296f6e;p=p5sagit%2Fp5-mst-13.2.git EPOC port to Psion5. To: Jarkko Hietaniemi Cc: perl5-porters@perl.org Subject: Re: Psion5 Message-ID: p4raw-id: //depot/cfgperl@3555 --- diff --git a/README.epoc b/README.epoc new file mode 100644 index 0000000..fd1c5c7 --- /dev/null +++ b/README.epoc @@ -0,0 +1,80 @@ +================================================= +Perl 5 README file for the EPOC operating system. +================================================== + +Olaf Flebbe (o.flebbe@science-computing.de) +http://www.fortunecity.de/wolkenkratzer/trumpet/84/perl5.html +June 27, 1999 + +Introduction +------------ + +This is a port of Perl version 5, revision 005-57 to EPOC. + +There are many features left out, because of restrictions of the posix +support in the SDK. + +The following known problems do exist: + +1) very little testing. + +2) no support for system, backquoting, pipes etc. One cannot exec a + different process. + +3) no signals, kill. Do not try to use them. + +4) select is missing. + +5) binmode does not work. (No CR LF to LF translation for text files) + +6) no Config.pm + +7) no I/O redirection. + +8) it may not run from a drive other than C: (I have no CF Card to test) + +9) sockets may hardly of any use. + +10) You need a shell in order to run perl.exe. + + +Compiling Perl 5 on the EPOC cross compiling envionment. +-------------------------------------------------------- + +0. You will need the C++ SDK from + http://developer.epocworld.com/. Install it on a separate drive. + +1. Unpack the sources in the epoc development drive: The sources + should be in a directory perl5.005/perl5.005_57 + +2. Move all files in the directory perl5.005_57/epoc to perl5.005_57. + +3. Check the perl.mmp file: It should have the correct locations for + project und subproject (see step 1) + +4. Change to the EPOC development drive and run + makmake perl marm + nmake -f perl.marm + makesis perl.pkg perl5.005.sis + +5. Beam the perl5.005.sis to the Psion5, install and enjoy! + +ToDo List +--------- + +- Allocate an UID from symbian. + +- Implement system() and I/O redirection, in order to run the + tests. + +- Implement getprotcolbyname() and relatives. + +- Implement perl as a OPX module. (What do you think?) + +Support Status +-------------- + +I'm offering this port "as is". You can ask me questions, but I can't +guarantee I'll be able to answer them; I don't know much about Perl +itself; + diff --git a/doio.c b/doio.c index 92a463c..e148fbb 100644 --- a/doio.c +++ b/doio.c @@ -1056,7 +1056,7 @@ Perl_do_execfree(pTHX) } } -#if !defined(OS2) && !defined(WIN32) && !defined(DJGPP) +#if !defined(OS2) && !defined(WIN32) && !defined(DJGPP) && !defined(EPOC) bool Perl_do_exec(pTHX_ char *cmd) diff --git a/epoc/config.h b/epoc/config.h new file mode 100644 index 0000000..e6cebb0 --- /dev/null +++ b/epoc/config.h @@ -0,0 +1,2690 @@ +/* This file (config_H) is a sample config.h file. If you are unable + to successfully run Configure, copy this file to config.h and + edit it to suit your system. +*/ +/* + * This file was produced by running the config_h.SH script, which + * gets its values from config.sh, which is generally produced by + * running Configure. + * + * Feel free to modify any of this as the need arises. Note, however, + * that running config_h.SH again will wipe out any changes you've made. + * For a more permanent change edit config.sh and rerun config_h.SH. + * + * $Id: Config_h.U,v 3.0.1.5 1997/02/28 14:57:43 ram Exp $ + */ + +/* + * Package name : perl5 + * Source directory : . + * Configuration time: Sat May 22 00:43:12 EET DST 1999 + * Configured by : jhi + * Target system : osf1 alpha.hut.fi v4.0 878 alpha + */ + +#ifndef _config_h_ +#define _config_h_ + +#define EPOC 1 +#define PERL_CORE 1 + +/* LOC_SED: + * This symbol holds the complete pathname to the sed program. + */ +/* #define LOC_SED "/usr/bin/sed" /**/ + +/* BIN: + * This symbol holds the path of the bin directory where the package will + * be installed. Program must be prepared to deal with ~name substitution. + */ +/* BIN_EXP: + * This symbol is the filename expanded version of the BIN symbol, for + * programs that do not want to deal with that at run-time. + */ +#define BIN "/perl" /**/ +#define BIN_EXP "/perl" /**/ + +/* HAS_ALARM: + * This symbol, if defined, indicates that the alarm routine is + * available. + */ +/* #define HAS_ALARM /**/ + +/* HASATTRIBUTE: + * This symbol indicates the C compiler can check for function attributes, + * such as printf formats. This is normally only supported by GNU cc. + */ +#ifdef __MARM__ +#define HASATTRIBUTE / **/ +#endif +#ifndef HASATTRIBUTE +#define __attribute__(_arg_) +#endif + +/* HAS_BCMP: + * This symbol is defined if the bcmp() routine is available to + * compare blocks of memory. + */ +#define HAS_BCMP /**/ + +/* HAS_BCOPY: + * This symbol is defined if the bcopy() routine is available to + * copy blocks of memory. + */ +#define HAS_BCOPY /**/ + +/* HAS_BZERO: + * This symbol is defined if the bzero() routine is available to + * set a memory block to 0. + */ +#define HAS_BZERO /**/ + +/* HAS_CHOWN: + * This symbol, if defined, indicates that the chown routine is + * available. + */ +/*#define HAS_CHOWN /**/ + +/* HAS_CHROOT: + * This symbol, if defined, indicates that the chroot routine is + * available. + */ +/*#define HAS_CHROOT /**/ + +/* HAS_CHSIZE: + * This symbol, if defined, indicates that the chsize routine is available + * to truncate files. You might need a -lx to get this routine. + */ +/*#define HAS_CHSIZE / **/ + +/* HASCONST: + * This symbol, if defined, indicates that this C compiler knows about + * the const type. There is no need to actually test for that symbol + * within your programs. The mere use of the "const" keyword will + * trigger the necessary tests. + */ +#define HASCONST /**/ +#ifndef HASCONST +#define const +#endif + +/* HAS_CRYPT: + * This symbol, if defined, indicates that the crypt routine is available + * to encrypt passwords and the like. + */ +/*#define HAS_CRYPT /**/ + +/* HAS_CUSERID: + * This symbol, if defined, indicates that the cuserid routine is + * available to get character login names. + */ +/*#define HAS_CUSERID /**/ + +/* HAS_DBL_DIG: + * This symbol, if defined, indicates that this system's + * or defines the symbol DBL_DIG, which is the number + * of significant digits in a double precision number. If this + * symbol is not defined, a guess of 15 is usually pretty good. + */ +/*#define HAS_DBL_DIG /* */ + +/* HAS_DIFFTIME: + * This symbol, if defined, indicates that the difftime routine is + * available. + */ +#define HAS_DIFFTIME /**/ + +/* HAS_DLERROR: + * This symbol, if defined, indicates that the dlerror routine is + * available to return a string describing the last error that + * occurred from a call to dlopen(), dlclose() or dlsym(). + */ +/*#define HAS_DLERROR /**/ + +/* SETUID_SCRIPTS_ARE_SECURE_NOW: + * This symbol, if defined, indicates that the bug that prevents + * setuid scripts from being secure is not present in this kernel. + */ +/* DOSUID: + * This symbol, if defined, indicates that the C program should + * check the script that it is executing for setuid/setgid bits, and + * attempt to emulate setuid/setgid on systems that have disabled + * setuid #! scripts because the kernel can't do it securely. + * It is up to the package designer to make sure that this emulation + * is done securely. Among other things, it should do an fstat on + * the script it just opened to make sure it really is a setuid/setgid + * script, it should make sure the arguments passed correspond exactly + * to the argument on the #! line, and it should not trust any + * subprocesses to which it must pass the filename rather than the + * file descriptor of the script to be executed. + */ +/*#define SETUID_SCRIPTS_ARE_SECURE_NOW / **/ +/*#define DOSUID / **/ + +/* HAS_DUP2: + * This symbol, if defined, indicates that the dup2 routine is + * available to duplicate file descriptors. + */ +/*#define HAS_DUP2 /**/ + +/* HAS_FCHMOD: + * This symbol, if defined, indicates that the fchmod routine is available + * to change mode of opened files. If unavailable, use chmod(). + */ +/*#define HAS_FCHMOD /**/ + +/* HAS_FCHOWN: + * This symbol, if defined, indicates that the fchown routine is available + * to change ownership of opened files. If unavailable, use chown(). + */ +/*#define HAS_FCHOWN /**/ + +/* HAS_FCNTL: + * This symbol, if defined, indicates to the C program that + * the fcntl() function exists. + */ +/*#define HAS_FCNTL /**/ + +/* HAS_FGETPOS: + * This symbol, if defined, indicates that the fgetpos routine is + * available to get the file position indicator, similar to ftell(). + */ +#define HAS_FGETPOS /**/ + +/* FLEXFILENAMES: + * This symbol, if defined, indicates that the system supports filenames + * longer than 14 characters. + */ +#define FLEXFILENAMES /**/ + +/* HAS_FLOCK: + * This symbol, if defined, indicates that the flock routine is + * available to do file locking. + */ +/*#define HAS_FLOCK /**/ + +/* HAS_FORK: + * This symbol, if defined, indicates that the fork routine is + * available. + */ +/*#define HAS_FORK /**/ + +/* HAS_FSETPOS: + * This symbol, if defined, indicates that the fsetpos routine is + * available to set the file position indicator, similar to fseek(). + */ +#define HAS_FSETPOS /**/ + +/* HAS_GETTIMEOFDAY: + * This symbol, if defined, indicates that the gettimeofday() system + * call is available for a sub-second accuracy clock. Usually, the file + * needs to be included (see I_SYS_RESOURCE). + * The type "Timeval" should be used to refer to "struct timeval". + */ +#define HAS_GETTIMEOFDAY /**/ +#ifdef HAS_GETTIMEOFDAY +#define Timeval struct timeval /* Structure used by gettimeofday() */ +#endif + +/* HAS_GETGROUPS: + * This symbol, if defined, indicates that the getgroups() routine is + * available to get the list of process groups. If unavailable, multiple + * groups are probably not supported. + */ +/*#define HAS_GETGROUPS /**/ + +/* HAS_GETLOGIN: + * This symbol, if defined, indicates that the getlogin routine is + * available to get the login name. + */ +/*#define HAS_GETLOGIN /**/ + +/* HAS_GETPGID: + * This symbol, if defined, indicates to the C program that + * the getpgid(pid) function is available to get the + * process group id. + */ +/*#define HAS_GETPGID /**/ + +/* HAS_GETPGRP: + * This symbol, if defined, indicates that the getpgrp routine is + * available to get the current process group. + */ +/* USE_BSD_GETPGRP: + * This symbol, if defined, indicates that getpgrp needs one + * arguments whereas USG one needs none. + */ +/*#define HAS_GETPGRP /**/ +/*#define USE_BSD_GETPGRP / **/ + +/* HAS_GETPGRP2: + * This symbol, if defined, indicates that the getpgrp2() (as in DG/UX) + * routine is available to get the current process group. + */ +/*#define HAS_GETPGRP2 / **/ + +/* HAS_GETPPID: + * This symbol, if defined, indicates that the getppid routine is + * available to get the parent process ID. + */ +/*#define HAS_GETPPID /**/ + +/* HAS_GETPRIORITY: + * This symbol, if defined, indicates that the getpriority routine is + * available to get a process's priority. + */ +/*#define HAS_GETPRIORITY /**/ + +/* HAS_INET_ATON: + * This symbol, if defined, indicates to the C program that the + * inet_aton() function is available to parse IP address "dotted-quad" + * strings. + */ +/*#define HAS_INET_ATON /**/ + +/* HAS_KILLPG: + * This symbol, if defined, indicates that the killpg routine is available + * to kill process groups. If unavailable, you probably should use kill + * with a negative process number. + */ +/*#define HAS_KILLPG /**/ + +/* HAS_LINK: + * This symbol, if defined, indicates that the link routine is + * available to create hard links. + */ +/*#define HAS_LINK /**/ + +/* HAS_LOCALECONV: + * This symbol, if defined, indicates that the localeconv routine is + * available for numeric and monetary formatting conventions. + */ +/*#define HAS_LOCALECONV /**/ + +/* HAS_LOCKF: + * This symbol, if defined, indicates that the lockf routine is + * available to do file locking. + */ +/*#define HAS_LOCKF /**/ + +/* HAS_LSTAT: + * This symbol, if defined, indicates that the lstat routine is + * available to do file stats on symbolic links. + */ +/*#define HAS_LSTAT /**/ + +/* HAS_MBLEN: + * This symbol, if defined, indicates that the mblen routine is available + * to find the number of bytes in a multibye character. + */ +/*#define HAS_MBLEN /**/ + +/* HAS_MBSTOWCS: + * This symbol, if defined, indicates that the mbstowcs routine is + * available to covert a multibyte string into a wide character string. + */ +/*#define HAS_MBSTOWCS /**/ + +/* HAS_MBTOWC: + * This symbol, if defined, indicates that the mbtowc routine is available + * to covert a multibyte to a wide character. + */ +/*#define HAS_MBTOWC /**/ + +/* HAS_MEMCMP: + * This symbol, if defined, indicates that the memcmp routine is available + * to compare blocks of memory. + */ +#define HAS_MEMCMP /**/ + +/* HAS_MEMCPY: + * This symbol, if defined, indicates that the memcpy routine is available + * to copy blocks of memory. + */ +#define HAS_MEMCPY /**/ + +/* HAS_MEMMOVE: + * This symbol, if defined, indicates that the memmove routine is available + * to copy potentially overlapping blocks of memory. This should be used + * only when HAS_SAFE_BCOPY is not defined. If neither is there, roll your + * own version. + */ +#define HAS_MEMMOVE /**/ + +/* HAS_MEMSET: + * This symbol, if defined, indicates that the memset routine is available + * to set blocks of memory. + */ +#define HAS_MEMSET /**/ + +/* HAS_MKDIR: + * This symbol, if defined, indicates that the mkdir routine is available + * to create directories. Otherwise you should fork off a new process to + * exec /bin/mkdir. + */ +#define HAS_MKDIR /**/ + +/* HAS_MKFIFO: + * This symbol, if defined, indicates that the mkfifo routine is + * available to create FIFOs. Otherwise, mknod should be able to + * do it for you. However, if mkfifo is there, mknod might require + * super-user privileges which mkfifo will not. + */ +/*#define HAS_MKFIFO /**/ + +/* HAS_MKTIME: + * This symbol, if defined, indicates that the mktime routine is + * available. + */ +#define HAS_MKTIME /**/ + +/* HAS_MSYNC: + * This symbol, if defined, indicates that the msync system call is + * available to synchronize a mapped file. + */ +/*#define HAS_MSYNC /**/ + +/* HAS_MUNMAP: + * This symbol, if defined, indicates that the munmap system call is + * available to unmap a region, usually mapped by mmap(). + */ +/*#define HAS_MUNMAP /**/ + +/* HAS_NICE: + * This symbol, if defined, indicates that the nice routine is + * available. + */ +/*#define HAS_NICE /**/ + +/* HAS_PATHCONF: + * This symbol, if defined, indicates that pathconf() is available + * to determine file-system related limits and options associated + * with a given filename. + */ +/* HAS_FPATHCONF: + * This symbol, if defined, indicates that pathconf() is available + * to determine file-system related limits and options associated + * with a given open file descriptor. + */ +/*#define HAS_PATHCONF /**/ +/*#define HAS_FPATHCONF /**/ + +/* HAS_PAUSE: + * This symbol, if defined, indicates that the pause routine is + * available to suspend a process until a signal is received. + */ +/*#define HAS_PAUSE /**/ + +/* HAS_PIPE: + * This symbol, if defined, indicates that the pipe routine is + * available to create an inter-process channel. + */ +/*#define HAS_PIPE /**/ + +/* HAS_POLL: + * This symbol, if defined, indicates that the poll routine is + * available to poll active file descriptors. You may safely + * include when this symbol is defined. + */ +/*#define HAS_POLL /**/ + +/* HAS_READDIR: + * This symbol, if defined, indicates that the readdir routine is + * available to read directory entries. You may have to include + * . See I_DIRENT. + */ +#define HAS_READDIR /**/ + +/* HAS_SEEKDIR: + * This symbol, if defined, indicates that the seekdir routine is + * available. You may have to include . See I_DIRENT. + */ +#define HAS_SEEKDIR /**/ + +/* HAS_TELLDIR: + * This symbol, if defined, indicates that the telldir routine is + * available. You may have to include . See I_DIRENT. + */ +#define HAS_TELLDIR /**/ + +/* HAS_REWINDDIR: + * This symbol, if defined, indicates that the rewinddir routine is + * available. You may have to include . See I_DIRENT. + */ +#define HAS_REWINDDIR /**/ + +/* HAS_READLINK: + * This symbol, if defined, indicates that the readlink routine is + * available to read the value of a symbolic link. + */ +/*#define HAS_READLINK /**/ + +/* HAS_RENAME: + * This symbol, if defined, indicates that the rename routine is available + * to rename files. Otherwise you should do the unlink(), link(), unlink() + * trick. + */ +#define HAS_RENAME /**/ + +/* HAS_RMDIR: + * This symbol, if defined, indicates that the rmdir routine is + * available to remove directories. Otherwise you should fork off a + * new process to exec /bin/rmdir. + */ +#define HAS_RMDIR /**/ + +/* HAS_SELECT: + * This symbol, if defined, indicates that the select routine is + * available to select active file descriptors. If the timeout field + * is used, may need to be included. + */ +/*#define HAS_SELECT /**/ + +/* HAS_SETEGID: + * This symbol, if defined, indicates that the setegid routine is available + * to change the effective gid of the current program. + */ +/*#define HAS_SETEGID /**/ + +/* HAS_SETEUID: + * This symbol, if defined, indicates that the seteuid routine is available + * to change the effective uid of the current program. + */ +/*#define HAS_SETEUID /**/ + +/* HAS_SETLINEBUF: + * This symbol, if defined, indicates that the setlinebuf routine is + * available to change stderr or stdout from block-buffered or unbuffered + * to a line-buffered mode. + */ +/*#define HAS_SETLINEBUF /**/ + +/* HAS_SETLOCALE: + * This symbol, if defined, indicates that the setlocale routine is + * available to handle locale-specific ctype implementations. + */ +/*#define HAS_SETLOCALE /**/ + +/* HAS_SETPGID: + * This symbol, if defined, indicates that the setpgid(pid, gpid) + * routine is available to set process group ID. + */ +/*#define HAS_SETPGID /**/ + +/* HAS_SETPGRP: + * This symbol, if defined, indicates that the setpgrp routine is + * available to set the current process group. + */ +/* USE_BSD_SETPGRP: + * This symbol, if defined, indicates that setpgrp needs two + * arguments whereas USG one needs none. See also HAS_SETPGID + * for a POSIX interface. + */ +/*#define HAS_SETPGRP /**/ +/*#define USE_BSD_SETPGRP /**/ + +/* HAS_SETPGRP2: + * This symbol, if defined, indicates that the setpgrp2() (as in DG/UX) + * routine is available to set the current process group. + */ +/*#define HAS_SETPGRP2 / **/ + +/* HAS_SETPRIORITY: + * This symbol, if defined, indicates that the setpriority routine is + * available to set a process's priority. + */ +/*#define HAS_SETPRIORITY /**/ + +/* HAS_SETREGID: + * This symbol, if defined, indicates that the setregid routine is + * available to change the real and effective gid of the current + * process. + */ +/* HAS_SETRESGID: + * This symbol, if defined, indicates that the setresgid routine is + * available to change the real, effective and saved gid of the current + * process. + */ +/*#define HAS_SETREGID /**/ +/*#define HAS_SETRESGID / **/ + +/* HAS_SETREUID: + * This symbol, if defined, indicates that the setreuid routine is + * available to change the real and effective uid of the current + * process. + */ +/* HAS_SETRESUID: + * This symbol, if defined, indicates that the setresuid routine is + * available to change the real, effective and saved uid of the current + * process. + */ +/*#define HAS_SETREUID /**/ +/*#define HAS_SETRESUID / **/ + +/* HAS_SETRGID: + * This symbol, if defined, indicates that the setrgid routine is available + * to change the real gid of the current program. + */ +/*#define HAS_SETRGID /**/ + +/* HAS_SETRUID: + * This symbol, if defined, indicates that the setruid routine is available + * to change the real uid of the current program. + */ +/*#define HAS_SETRUID /**/ + +/* HAS_SETSID: + * This symbol, if defined, indicates that the setsid routine is + * available to set the process group ID. + */ +/*#define HAS_SETSID /**/ + +/* Shmat_t: + * This symbol holds the return type of the shmat() system call. + * Usually set to 'void *' or 'char *'. + */ +/* HAS_SHMAT_PROTOTYPE: + * This symbol, if defined, indicates that the sys/shm.h includes + * a prototype for shmat(). Otherwise, it is up to the program to + * guess one. Shmat_t shmat _((int, Shmat_t, int)) is a good guess, + * but not always right so it should be emitted by the program only + * when HAS_SHMAT_PROTOTYPE is not defined to avoid conflicting defs. + */ +/*#define Shmat_t void * /**/ +/*#define HAS_SHMAT_PROTOTYPE /**/ + +/* HAS_STRCHR: + * This symbol is defined to indicate that the strchr()/strrchr() + * functions are available for string searching. If not, try the + * index()/rindex() pair. + */ +/* HAS_INDEX: + * This symbol is defined to indicate that the index()/rindex() + * functions are available for string searching. + */ +#define HAS_STRCHR /**/ +/*#define HAS_INDEX / **/ + +/* HAS_STRCOLL: + * This symbol, if defined, indicates that the strcoll routine is + * available to compare strings using collating information. + */ +#define HAS_STRCOLL /**/ + +/* USE_STRUCT_COPY: + * This symbol, if defined, indicates that this C compiler knows how + * to copy structures. If undefined, you'll need to use a block copy + * routine of some sort instead. + */ +#define USE_STRUCT_COPY /**/ + +/* HAS_STRTOD: + * This symbol, if defined, indicates that the strtod routine is + * available to provide better numeric string conversion than atof(). + */ +#define HAS_STRTOD /**/ + +/* HAS_STRTOL: + * This symbol, if defined, indicates that the strtol routine is available + * to provide better numeric string conversion than atoi() and friends. + */ +#define HAS_STRTOL /**/ + +/* HAS_STRTOUL: + * This symbol, if defined, indicates that the strtoul routine is + * available to provide conversion of strings to unsigned long. + */ +#define HAS_STRTOUL /**/ + +/* HAS_STRXFRM: + * This symbol, if defined, indicates that the strxfrm() routine is + * available to transform strings. + */ +#define HAS_STRXFRM /**/ + +/* HAS_SYMLINK: + * This symbol, if defined, indicates that the symlink routine is available + * to create symbolic links. + */ +/*#define HAS_SYMLINK /**/ + +/* HAS_SYSCALL: + * This symbol, if defined, indicates that the syscall routine is + * available to call arbitrary system calls. If undefined, that's tough. + */ +/*#define HAS_SYSCALL /**/ + +/* HAS_SYSCONF: + * This symbol, if defined, indicates that sysconf() is available + * to determine system related limits and options. + */ +#define HAS_SYSCONF /**/ + +/* HAS_SYSTEM: + * This symbol, if defined, indicates that the system routine is + * available to issue a shell command. + */ +#define HAS_SYSTEM /**/ + +/* HAS_TCGETPGRP: + * This symbol, if defined, indicates that the tcgetpgrp routine is + * available to get foreground process group ID. + */ +/*#define HAS_TCGETPGRP /**/ + +/* HAS_TCSETPGRP: + * This symbol, if defined, indicates that the tcsetpgrp routine is + * available to set foreground process group ID. + */ +/*#define HAS_TCSETPGRP /**/ + +/* HAS_TRUNCATE: + * This symbol, if defined, indicates that the truncate routine is + * available to truncate files. + */ +/*#define HAS_TRUNCATE /**/ + +/* HAS_TZNAME: + * This symbol, if defined, indicates that the tzname[] array is + * available to access timezone names. + */ +/*#define HAS_TZNAME /**/ + +/* HAS_UMASK: + * This symbol, if defined, indicates that the umask routine is + * available to set and get the value of the file creation mask. + */ +/*#define HAS_UMASK /**/ + +/* HASVOLATILE: + * This symbol, if defined, indicates that this C compiler knows about + * the volatile declaration. + */ +#define HASVOLATILE /**/ +#ifndef HASVOLATILE +#define volatile +#endif + +/* HAS_WAIT4: + * This symbol, if defined, indicates that wait4() exists. + */ +/*#define HAS_WAIT4 /**/ + +/* HAS_WAITPID: + * This symbol, if defined, indicates that the waitpid routine is + * available to wait for child process. + */ +/*#define HAS_WAITPID /**/ + +/* HAS_WCSTOMBS: + * This symbol, if defined, indicates that the wcstombs routine is + * available to convert wide character strings to multibyte strings. + */ +/*#define HAS_WCSTOMBS /**/ + +/* HAS_WCTOMB: + * This symbol, if defined, indicates that the wctomb routine is available + * to covert a wide character to a multibyte. + */ +/*#define HAS_WCTOMB /**/ + +/* I_ARPA_INET: + * This symbol, if defined, indicates to the C program that it should + * include to get inet_addr and friends declarations. + */ +#define I_ARPA_INET /**/ + +/* I_DBM: + * This symbol, if defined, indicates that exists and should + * be included. + */ +/* I_RPCSVC_DBM: + * This symbol, if defined, indicates that exists and + * should be included. + */ +/*#define I_DBM /**/ +/*#define I_RPCSVC_DBM / **/ + +/* I_DIRENT: + * This symbol, if defined, indicates to the C program that it should + * include . Using this symbol also triggers the definition + * of the Direntry_t define which ends up being 'struct dirent' or + * 'struct direct' depending on the availability of . + */ +/* DIRNAMLEN: + * This symbol, if defined, indicates to the C program that the length + * of directory entry names is provided by a d_namlen field. Otherwise + * you need to do strlen() on the d_name field. + */ +/* Direntry_t: + * This symbol is set to 'struct direct' or 'struct dirent' depending on + * whether dirent is available or not. You should use this pseudo type to + * portably declare your directory entries. + */ +#define I_DIRENT /**/ +/*#define DIRNAMLEN /**/ +#define Direntry_t struct dirent + +/* I_DLFCN: + * This symbol, if defined, indicates that exists and should + * be included. + */ +/*#define I_DLFCN /**/ + +/* I_FCNTL: + * This manifest constant tells the C program to include . + */ +#define I_FCNTL / **/ + +/* I_FLOAT: + * This symbol, if defined, indicates to the C program that it should + * include to get definition of symbols like DBL_MAX or + * DBL_MIN, i.e. machine dependent floating point values. + */ +/*#define I_FLOAT /**/ + +/* I_LIMITS: + * This symbol, if defined, indicates to the C program that it should + * include to get definition of symbols like WORD_BIT or + * LONG_MAX, i.e. machine dependant limitations. + */ +#define I_LIMITS /**/ + +/* I_LOCALE: + * This symbol, if defined, indicates to the C program that it should + * include . + */ +/*#define I_LOCALE /**/ + +/* I_MATH: + * This symbol, if defined, indicates to the C program that it should + * include . + */ +#define I_MATH /**/ + +/* I_MEMORY: + * This symbol, if defined, indicates to the C program that it should + * include . + */ +/*#define I_MEMORY / **/ + +/* I_NDBM: + * This symbol, if defined, indicates that exists and should + * be included. + */ +/*#define I_NDBM /**/ + +/* I_NET_ERRNO: + * This symbol, if defined, indicates that exists and + * should be included. + */ +/*#define I_NET_ERRNO / **/ + +/* I_NETINET_IN: + * This symbol, if defined, indicates to the C program that it should + * include . Otherwise, you may try . + */ +#define I_NETINET_IN /**/ + +/* I_SFIO: + * This symbol, if defined, indicates to the C program that it should + * include . + */ +/*#define I_SFIO / **/ + +/* I_STDDEF: + * This symbol, if defined, indicates that exists and should + * be included. + */ +#define I_STDDEF /**/ + +/* I_STDLIB: + * This symbol, if defined, indicates that exists and should + * be included. + */ +#define I_STDLIB /**/ + +/* I_STRING: + * This symbol, if defined, indicates to the C program that it should + * include (USG systems) instead of (BSD systems). + */ +#define I_STRING /**/ + +/* I_SYS_DIR: + * This symbol, if defined, indicates to the C program that it should + * include . + */ +/*#define I_SYS_DIR /**/ + +/* I_SYS_FILE: + * This symbol, if defined, indicates to the C program that it should + * include to get definition of R_OK and friends. + */ +/*#define I_SYS_FILE /**/ + +/* I_SYS_IOCTL: + * This symbol, if defined, indicates that exists and should + * be included. Otherwise, include or . + */ +#define I_SYS_IOCTL /**/ + +/* I_SYS_NDIR: + * This symbol, if defined, indicates to the C program that it should + * include . + */ +/*#define I_SYS_NDIR / **/ + +/* I_SYS_PARAM: + * This symbol, if defined, indicates to the C program that it should + * include . + */ +#define I_SYS_PARAM /**/ + +/* I_SYS_RESOURCE: + * This symbol, if defined, indicates to the C program that it should + * include . + */ +#define I_SYS_RESOURCE /**/ + +/* I_SYS_SELECT: + * This symbol, if defined, indicates to the C program that it should + * include in order to get definition of struct timeval. + */ +/*#define I_SYS_SELECT /**/ + +/* I_SYS_STAT: + * This symbol, if defined, indicates to the C program that it should + * include . + */ +#define I_SYS_STAT /**/ + +/* I_SYS_TIMES: + * This symbol, if defined, indicates to the C program that it should + * include . + */ +#define I_SYS_TIMES /**/ + +/* I_SYS_TYPES: + * This symbol, if defined, indicates to the C program that it should + * include . + */ +#define I_SYS_TYPES /**/ + +/* I_SYS_UN: + * This symbol, if defined, indicates to the C program that it should + * include to get UNIX domain socket definitions. + */ +/*#define I_SYS_UN /**/ + +/* I_SYS_WAIT: + * This symbol, if defined, indicates to the C program that it should + * include . + */ +#define I_SYS_WAIT /**/ + +/* I_TERMIO: + * This symbol, if defined, indicates that the program should include + * rather than . There are also differences in + * the ioctl() calls that depend on the value of this symbol. + */ +/* I_TERMIOS: + * This symbol, if defined, indicates that the program should include + * the POSIX termios.h rather than sgtty.h or termio.h. + * There are also differences in the ioctl() calls that depend on the + * value of this symbol. + */ +/* I_SGTTY: + * This symbol, if defined, indicates that the program should include + * rather than . There are also differences in + * the ioctl() calls that depend on the value of this symbol. + */ +/*#define I_TERMIO / **/ +/*#define I_TERMIOS /**/ +/*#define I_SGTTY / **/ + +/* I_UNISTD: + * This symbol, if defined, indicates to the C program that it should + * include . + */ +#define I_UNISTD /**/ + +/* I_UTIME: + * This symbol, if defined, indicates to the C program that it should + * include . + */ +/*#define I_UTIME /**/ + +/* I_VALUES: + * This symbol, if defined, indicates to the C program that it should + * include to get definition of symbols like MINFLOAT or + * MAXLONG, i.e. machine dependant limitations. Probably, you + * should use instead, if it is available. + */ +/*#define I_VALUES /**/ + +/* I_STDARG: + * This symbol, if defined, indicates that exists and should + * be included. + */ +/* I_VARARGS: + * This symbol, if defined, indicates to the C program that it should + * include . + */ +#define I_STDARG /**/ +/*#define I_VARARGS / **/ + +/* I_VFORK: + * This symbol, if defined, indicates to the C program that it should + * include vfork.h. + */ +/*#define I_VFORK / **/ + +/* CAN_PROTOTYPE: + * If defined, this macro indicates that the C compiler can handle + * function prototypes. + */ +/* _: + * This macro is used to declare function parameters for folks who want + * to make declarations with prototypes using a different style than + * the above macros. Use double parentheses. For example: + * + * int main _((int argc, char *argv[])); + */ +#define CAN_PROTOTYPE /**/ +#ifdef CAN_PROTOTYPE +#define _(args) args +#else +#define _(args) () +#endif + +/* SH_PATH: + * This symbol contains the full pathname to the shell used on this + * on this system to execute Bourne shell scripts. Usually, this will be + * /bin/sh, though it's possible that some systems will have /bin/ksh, + * /bin/pdksh, /bin/ash, /bin/bash, or even something such as + * D:/bin/sh.exe. + */ +#define SH_PATH "/bin/sh" /**/ + +/* STDCHAR: + * This symbol is defined to be the type of char used in stdio.h. + * It has the values "unsigned char" or "char". + */ +#define STDCHAR char /**/ + +/* HAS_ACCESSX: + * This symbol, if defined, indicates that the accessx routine is + * available to do extended access checks. + */ +/*#define HAS_ACCESSX / **/ + +/* HAS_EACCESS: + * This symbol, if defined, indicates that the eaccess routine is + * available to do extended access checks. + */ +/*#define HAS_EACCESS / **/ + +/* I_SYS_ACCESS: + * This symbol, if defined, indicates to the C program that it should + * include . + */ +/*#define I_SYS_ACCESS /**/ + +/* I_SYS_SECURITY: + * This symbol, if defined, indicates to the C program that it should + * include . + */ +/*#define I_SYS_SECURITY /**/ + +/* CROSSCOMPILE: + * This symbol, if defined, signifies that we our + * build process is a cross-compilation. + */ +#define CROSSCOMPILE / **/ + +/* INTSIZE: + * This symbol contains the value of sizeof(int) so that the C + * preprocessor can make decisions based on it. + */ +/* LONGSIZE: + * This symbol contains the value of sizeof(long) so that the C + * preprocessor can make decisions based on it. + */ +/* SHORTSIZE: + * This symbol contains the value of sizeof(short) so that the C + * preprocessor can make decisions based on it. + */ +#define INTSIZE 4 /**/ +#define LONGSIZE 8 /**/ +#define SHORTSIZE 2 /**/ + +/* MULTIARCH: + * This symbol, if defined, signifies that the build + * process will produce some binary files that are going to be + * used in a cross-platform environment. This is the case for + * example with the NeXT "fat" binaries that contain executables + * for several CPUs. + */ +#define MULTIARCH / **/ + +/* MEM_ALIGNBYTES: + * This symbol contains the number of bytes required to align a + * double. Usual values are 2, 4 and 8. The default is eight, + * for safety. + */ +#if defined(CROSSCOMPILE) || defined(MULTIARCH) +# define MEM_ALIGNBYTES 8 +#else +#define MEM_ALIGNBYTES 8 +#endif + +/* BYTEORDER: + * This symbol holds the hexadecimal constant defined in byteorder, + * i.e. 0x1234 or 0x4321, etc... + * If the compiler supports cross-compiling or multiple-architecture + * binaries (eg. on NeXT systems), use compiler-defined macros to + * determine the byte order. + * On NeXT 3.2 (and greater), you can build "Fat" Multiple Architecture + * Binaries (MAB) on either big endian or little endian machines. + * The endian-ness is available at compile-time. This only matters + * for perl, where the config.h can be generated and installed on + * one system, and used by a different architecture to build an + * extension. Older versions of NeXT that might not have + * defined either *_ENDIAN__ were all on Motorola 680x0 series, + * so the default case (for NeXT) is big endian to catch them. + * This might matter for NeXT 3.0. + */ +#if defined(CROSSCOMPILE) || defined(MULTIARCH) +# ifdef __LITTLE_ENDIAN__ +# if LONGSIZE == 4 +# define BYTEORDER 0x1234 +# else +# if LONGSIZE == 8 +# define BYTEORDER 0x12345678 +# endif +# endif +# else +# ifdef __BIG_ENDIAN__ +# if LONGSIZE == 4 +# define BYTEORDER 0x4321 +# else +# if LONGSIZE == 8 +# define BYTEORDER 0x87654321 +# endif +# endif +# endif +# endif +# if !defined(BYTEORDER) && (defined(NeXT) || defined(__NeXT__)) +# define BYTEORDER 0x4321 +# endif +#else +#define BYTEORDER 0x12345678 /* large digits for MSB */ +#endif /* NeXT */ + +/* CASTI32: + * This symbol is defined if the C compiler can cast negative + * or large floating point numbers to 32-bit ints. + */ +/*#define CASTI32 / **/ + +/* CASTNEGFLOAT: + * This symbol is defined if the C compiler can cast negative + * numbers to unsigned longs, ints and shorts. + */ +/* CASTFLAGS: + * This symbol contains flags that say what difficulties the compiler + * has casting odd floating values to unsigned long: + * 0 = ok + * 1 = couldn't cast < 0 + * 2 = couldn't cast >= 0x80000000 + * 4 = couldn't cast in argument expression list + */ +/*#define CASTNEGFLOAT /**/ +/*#define CASTFLAGS 0 /**/ + +/* VOID_CLOSEDIR: + * This symbol, if defined, indicates that the closedir() routine + * does not return a value. + */ +/*#define VOID_CLOSEDIR / **/ + +/* HAS_FD_SET: + * This symbol, when defined, indicates presence of the fd_set typedef + * in + */ +#define HAS_FD_SET /**/ + +/* Gconvert: + * This preprocessor macro is defined to convert a floating point + * number to a string without a trailing decimal point. This + * emulates the behavior of sprintf("%g"), but is sometimes much more + * efficient. If gconvert() is not available, but gcvt() drops the + * trailing decimal point, then gcvt() is used. If all else fails, + * a macro using sprintf("%g") is used. Arguments for the Gconvert + * macro are: value, number of digits, whether trailing zeros should + * be retained, and the output buffer. + * Possible values are: + * d_Gconvert='gconvert((x),(n),(t),(b))' + * d_Gconvert='gcvt((x),(n),(b))' + * d_Gconvert='sprintf((b),"%.*g",(n),(x))' + * The last two assume trailing zeros should not be kept. + */ +#define Gconvert(x,n,t,b) sprintf((b),"%.*g",(n),(x)) + +/* HAS_GNULIBC: + * This symbol, if defined, indicates to the C program that + * the GNU C library is being used. + */ +/*#define HAS_GNULIBC / **/ +/* HAS_ISASCII: + * This manifest constant lets the C program know that isascii + * is available. + */ +#define HAS_ISASCII /**/ + +/* HAS_LCHOWN: + * This symbol, if defined, indicates that the lchown routine is + * available to operate on a symbolic link (instead of following the + * link). + */ +/*##define HAS_LCHOWN /**/ + +/* HAS_OPEN3: + * This manifest constant lets the C program know that the three + * argument form of open(2) is available. + */ +#define HAS_OPEN3 /**/ + +/* HAS_SAFE_BCOPY: + * This symbol, if defined, indicates that the bcopy routine is available + * to copy potentially overlapping memory blocks. Otherwise you should + * probably use memmove() or memcpy(). If neither is defined, roll your + * own version. + */ +/*##define HAS_SAFE_BCOPY /**/ + +/* HAS_SAFE_MEMCPY: + * This symbol, if defined, indicates that the memcpy routine is available + * to copy potentially overlapping memory blocks. Otherwise you should + * probably use memmove() or memcpy(). If neither is defined, roll your + * own version. + */ +/*#define HAS_SAFE_MEMCPY / **/ + +/* HAS_SANE_MEMCMP: + * This symbol, if defined, indicates that the memcmp routine is available + * and can be used to compare relative magnitudes of chars with their high + * bits set. If it is not defined, roll your own version. + */ +#define HAS_SANE_MEMCMP /**/ + +/* HAS_SIGACTION: + * This symbol, if defined, indicates that Vr4's sigaction() routine + * is available. + */ +/*##define HAS_SIGACTION /**/ + +/* HAS_SIGSETJMP: + * This variable indicates to the C program that the sigsetjmp() + * routine is available to save the calling process's registers + * and stack environment for later use by siglongjmp(), and + * to optionally save the process's signal mask. See + * Sigjmp_buf, Sigsetjmp, and Siglongjmp. + */ +/* Sigjmp_buf: + * This is the buffer type to be used with Sigsetjmp and Siglongjmp. + */ +/* Sigsetjmp: + * This macro is used in the same way as sigsetjmp(), but will invoke + * traditional setjmp() if sigsetjmp isn't available. + * See HAS_SIGSETJMP. + */ +/* Siglongjmp: + * This macro is used in the same way as siglongjmp(), but will invoke + * traditional longjmp() if siglongjmp isn't available. + * See HAS_SIGSETJMP. + */ +/*##define HAS_SIGSETJMP /**/ +#ifdef HAS_SIGSETJMP +#define Sigjmp_buf sigjmp_buf +#define Sigsetjmp(buf,save_mask) sigsetjmp((buf),(save_mask)) +#define Siglongjmp(buf,retval) siglongjmp((buf),(retval)) +#else +#define Sigjmp_buf jmp_buf +#define Sigsetjmp(buf,save_mask) setjmp((buf)) +#define Siglongjmp(buf,retval) longjmp((buf),(retval)) +#endif + +/* USE_STDIO_PTR: + * This symbol is defined if the _ptr and _cnt fields (or similar) + * of the stdio FILE structure can be used to access the stdio buffer + * for a file handle. If this is defined, then the FILE_ptr(fp) + * and FILE_cnt(fp) macros will also be defined and should be used + * to access these fields. + */ +/* FILE_ptr: + * This macro is used to access the _ptr field (or equivalent) of the + * FILE structure pointed to by its argument. This macro will always be + * defined if USE_STDIO_PTR is defined. + */ +/* STDIO_PTR_LVALUE: + * This symbol is defined if the FILE_ptr macro can be used as an + * lvalue. + */ +/* FILE_cnt: + * This macro is used to access the _cnt field (or equivalent) of the + * FILE structure pointed to by its argument. This macro will always be + * defined if USE_STDIO_PTR is defined. + */ +/* STDIO_CNT_LVALUE: + * This symbol is defined if the FILE_cnt macro can be used as an + * lvalue. + */ +/*##define USE_STDIO_PTR /**/ +#ifdef USE_STDIO_PTR +#define FILE_ptr(fp) ((fp)->_ptr) +#define STDIO_PTR_LVALUE /**/ +#define FILE_cnt(fp) ((fp)->_cnt) +#define STDIO_CNT_LVALUE /**/ +#endif + +/* USE_STDIO_BASE: + * This symbol is defined if the _base field (or similar) of the + * stdio FILE structure can be used to access the stdio buffer for + * a file handle. If this is defined, then the FILE_base(fp) macro + * will also be defined and should be used to access this field. + * Also, the FILE_bufsiz(fp) macro will be defined and should be used + * to determine the number of bytes in the buffer. USE_STDIO_BASE + * will never be defined unless USE_STDIO_PTR is. + */ +/* FILE_base: + * This macro is used to access the _base field (or equivalent) of the + * FILE structure pointed to by its argument. This macro will always be + * defined if USE_STDIO_BASE is defined. + */ +/* FILE_bufsiz: + * This macro is used to determine the number of bytes in the I/O + * buffer pointed to by _base field (or equivalent) of the FILE + * structure pointed to its argument. This macro will always be defined + * if USE_STDIO_BASE is defined. + */ +/*##define USE_STDIO_BASE /**/ +#ifdef USE_STDIO_BASE +#define FILE_base(fp) ((fp)->_base) +#define FILE_bufsiz(fp) ((fp)->_cnt + (fp)->_ptr - (fp)->_base) +#endif + +/* HAS_VPRINTF: + * This symbol, if defined, indicates that the vprintf routine is available + * to printf with a pointer to an argument list. If unavailable, you + * may need to write your own, probably in terms of _doprnt(). + */ +/* USE_CHAR_VSPRINTF: + * This symbol is defined if this system has vsprintf() returning type + * (char*). The trend seems to be to declare it as "int vsprintf()". It + * is up to the package author to declare vsprintf correctly based on the + * symbol. + */ +#define HAS_VPRINTF /**/ +/*#define USE_CHAR_VSPRINTF / **/ + +/* DOUBLESIZE: + * This symbol contains the size of a double, so that the C preprocessor + * can make decisions based on it. + */ +#define DOUBLESIZE 8 /**/ + +/* I_TIME: + * This symbol, if defined, indicates to the C program that it should + * include . + */ +/* I_SYS_TIME: + * This symbol, if defined, indicates to the C program that it should + * include . + */ +/* I_SYS_TIME_KERNEL: + * This symbol, if defined, indicates to the C program that it should + * include with KERNEL defined. + */ +#define I_TIME / **/ +#define I_SYS_TIME /**/ +/*#define I_SYS_TIME_KERNEL / **/ + +/* VAL_O_NONBLOCK: + * This symbol is to be used during open() or fcntl(F_SETFL) to turn on + * non-blocking I/O for the file descriptor. Note that there is no way + * back, i.e. you cannot turn it blocking again this way. If you wish to + * alternatively switch between blocking and non-blocking, use the + * ioctl(FIOSNBIO) call instead, but that is not supported by all devices. + */ +/* VAL_EAGAIN: + * This symbol holds the errno error code set by read() when no data was + * present on the non-blocking file descriptor. + */ +/* RD_NODATA: + * This symbol holds the return code from read() when no data is present + * on the non-blocking file descriptor. Be careful! If EOF_NONBLOCK is + * not defined, then you can't distinguish between no data and EOF by + * issuing a read(). You'll have to find another way to tell for sure! + */ +/* EOF_NONBLOCK: + * This symbol, if defined, indicates to the C program that a read() on + * a non-blocking file descriptor will return 0 on EOF, and not the value + * held in RD_NODATA (-1 usually, in that case!). + */ +#define VAL_O_NONBLOCK O_NONBLOCK +#define VAL_EAGAIN EAGAIN +#define RD_NODATA -1 +#define EOF_NONBLOCK + +/* PTRSIZE: + * This symbol contains the size of a pointer, so that the C preprocessor + * can make decisions based on it. It will be sizeof(void *) if + * the compiler supports (void *); otherwise it will be + * sizeof(char *). + */ +#define PTRSIZE 8 /**/ + +/* Drand01: + * This macro is to be used to generate uniformly distributed + * random numbers over the range [0., 1.[. You may have to supply + * an 'extern double drand48();' in your program since SunOS 4.1.3 + * doesn't provide you with anything relevant in it's headers. + * See HAS_DRAND48_PROTO. + */ +/* Rand_seed_t: + * This symbol defines the type of the argument of the + * random seed function. + */ +/* seedDrand01: + * This symbol defines the macro to be used in seeding the + * random number generator (see Drand01). + */ +/* RANDBITS: + * This symbol indicates how many bits are produced by the + * function used to generate normalized random numbers. + * Values include 15, 16, 31, and 48. + */ +#define Drand01() (rand()/(double)((unsigned)1< or + * to get any typedef'ed information. + * We will pick a type such that sizeof(SSize_t) == sizeof(Size_t). + */ +#define SSize_t long /* signed count of bytes */ + +/* EBCDIC: + * This symbol, if defined, indicates that this system uses + * EBCDIC encoding. + */ +/*#define EBCDIC / **/ + +/* OSNAME: + * This symbol contains the name of the operating system, as determined + * by Configure. You shouldn't rely on it too much; the specific + * feature tests from Configure are generally more reliable. + */ +#define OSNAME "epoc" /**/ + +/* CAT2: + * This macro catenates 2 tokens together. + */ +/* STRINGIFY: + * This macro surrounds its token with double quotes. + */ +#if 42 == 1 +#define CAT2(a,b)a/**/b +#define STRINGIFY(a)"a" + /* If you can get stringification with catify, tell me how! */ +#endif +#if 42 == 42 +#define CAT2(a,b)a ## b +#define StGiFy(a)# a +#define STRINGIFY(a)StGiFy(a) +#endif +#if 42 != 1 && 42 != 42 +#include "Bletch: How does this C preprocessor catenate tokens?" +#endif + +/* CPPSTDIN: + * This symbol contains the first part of the string which will invoke + * the C preprocessor on the standard input and produce to standard + * output. Typical value of "cc -E" or "/lib/cpp", but it can also + * call a wrapper. See CPPRUN. + */ +/* CPPMINUS: + * This symbol contains the second part of the string which will invoke + * the C preprocessor on the standard input and produce to standard + * output. This symbol will have the value "-" if CPPSTDIN needs a minus + * to specify standard input, otherwise the value is "". + */ +/* CPPRUN: + * This symbol contains the string which will invoke a C preprocessor on + * the standard input and produce to standard output. It needs to end + * with CPPLAST, after all other preprocessor flags have been specified. + * The main difference with CPPSTDIN is that this program will never be a + * pointer to a shell wrapper, i.e. it will be empty if no preprocessor is + * available directly to the user. Note that it may well be different from + * the preprocessor used to compile the C program. + */ +#define CPPSTDIN "cppstdin" +#define CPPMINUS "" +#define CPPRUN "/usr/bin/cpp" + +/* HAS_ACCESS: + * This manifest constant lets the C program know that the access() + * system call is available to check for accessibility using real UID/GID. + * (always present on UNIX.) + */ +/*#define HAS_ACCESS /**/ + +/* HAS_CSH: + * This symbol, if defined, indicates that the C-shell exists. + */ +/* CSH: + * This symbol, if defined, contains the full pathname of csh. + */ +/*#define HAS_CSH /**/ +#ifdef HAS_CSH +#define CSH "/usr/bin/csh" /**/ +#endif + +/* HAS_ENDGRENT: + * This symbol, if defined, indicates that the getgrent routine is + * available for finalizing sequential access of the group database. + */ +/*#define HAS_ENDGRENT /**/ + +/* HAS_ENDHOSTENT: + * This symbol, if defined, indicates that the endhostent() routine is + * available to close whatever was being used for host queries. + */ +/*#define HAS_ENDHOSTENT /**/ + +/* HAS_ENDNETENT: + * This symbol, if defined, indicates that the endnetent() routine is + * available to close whatever was being used for network queries. + */ +/*#define HAS_ENDNETENT /**/ + +/* HAS_ENDPROTOENT: + * This symbol, if defined, indicates that the endprotoent() routine is + * available to close whatever was being used for protocol queries. + */ +/*#define HAS_ENDPROTOENT /**/ + +/* HAS_ENDPWENT: + * This symbol, if defined, indicates that the getgrent routine is + * available for finalizing sequential access of the passwd database. + */ +/*#define HAS_ENDPWENT /**/ + +/* HAS_ENDSERVENT: + * This symbol, if defined, indicates that the endservent() routine is + * available to close whatever was being used for service queries. + */ +/*#define HAS_ENDSERVENT /**/ + +/* HAS_GETGRENT: + * This symbol, if defined, indicates that the getgrent routine is + * available for sequential access of the group database. + */ +/*#define HAS_GETGRENT /**/ + +/* HAS_GETHOSTBYADDR: + * This symbol, if defined, indicates that the gethostbyaddr() routine is + * available to look up hosts by their IP addresses. + */ +#define HAS_GETHOSTBYADDR /**/ + +/* HAS_GETHOSTBYNAME: + * This symbol, if defined, indicates that the gethostbyname() routine is + * available to look up host names in some data base or other. + */ +#define HAS_GETHOSTBYNAME /**/ + +/* HAS_GETHOSTENT: + * This symbol, if defined, indicates that the gethostent() routine is + * available to look up host names in some data base or another. + */ +/*#define HAS_GETHOSTENT /**/ + +/* HAS_GETHOSTNAME: + * This symbol, if defined, indicates that the C program may use the + * gethostname() routine to derive the host name. See also HAS_UNAME + * and PHOSTNAME. + */ +/* HAS_UNAME: + * This symbol, if defined, indicates that the C program may use the + * uname() routine to derive the host name. See also HAS_GETHOSTNAME + * and PHOSTNAME. + */ +/* PHOSTNAME: + * This symbol, if defined, indicates the command to feed to the + * popen() routine to derive the host name. See also HAS_GETHOSTNAME + * and HAS_UNAME. Note that the command uses a fully qualified path, + * so that it is safe even if used by a process with super-user + * privileges. + */ +/*#define HAS_GETHOSTNAME /**/ +/*#define HAS_UNAME /**/ +#undef HAS_PHOSTNAME +#ifdef HAS_PHOSTNAME +#define PHOSTNAME "" /* How to get the host name */ +#endif + +/* HAS_GETNETBYADDR: + * This symbol, if defined, indicates that the getnetbyaddr() routine is + * available to look up networks by their IP addresses. + */ +/*#define HAS_GETNETBYADDR /**/ + +/* HAS_GETNETBYNAME: + * This symbol, if defined, indicates that the getnetbyname() routine is + * available to look up networks by their names. + */ +/*#define HAS_GETNETBYNAME /**/ + +/* HAS_GETNETENT: + * This symbol, if defined, indicates that the getnetent() routine is + * available to look up network names in some data base or another. + */ +/*#define HAS_GETNETENT /**/ + +/* HAS_GETPROTOENT: + * This symbol, if defined, indicates that the getprotoent() routine is + * available to look up protocols in some data base or another. + */ +/*#define HAS_GETPROTOENT /**/ + +/* HAS_GETPROTOBYNAME: + * This symbol, if defined, indicates that the getprotobyname() + * routine is available to look up protocols by their name. + */ +/* HAS_GETPROTOBYNUMBER: + * This symbol, if defined, indicates that the getprotobynumber() + * routine is available to look up protocols by their number. + */ +/*#define HAS_GETPROTOBYNAME /**/ +/*#define HAS_GETPROTOBYNUMBER /**/ + +/* HAS_GETPWENT: + * This symbol, if defined, indicates that the getpwent routine is + * available for sequential access of the passwd database. + * If this is not available, the older getpw() function may be available. + */ +/*#define HAS_GETPWENT /**/ + +/* HAS_GETSERVENT: + * This symbol, if defined, indicates that the getservent() routine is + * available to look up network services in some data base or another. + */ +/*#define HAS_GETSERVENT /**/ + +/* HAS_GETSERVBYNAME: + * This symbol, if defined, indicates that the getservbyname() + * routine is available to look up services by their name. + */ +/* HAS_GETSERVBYPORT: + * This symbol, if defined, indicates that the getservbyport() + * routine is available to look up services by their port. + */ +/*#define HAS_GETSERVBYNAME /**/ +/*#define HAS_GETSERVBYPORT /**/ +/* +/* HAS_HTONL: + * This symbol, if defined, indicates that the htonl() routine (and + * friends htons() ntohl() ntohs()) are available to do network + * order byte swapping. + */ +/* HAS_HTONS: + * This symbol, if defined, indicates that the htons() routine (and + * friends htonl() ntohl() ntohs()) are available to do network + * order byte swapping. + */ +/* HAS_NTOHL: + * This symbol, if defined, indicates that the ntohl() routine (and + * friends htonl() htons() ntohs()) are available to do network + * order byte swapping. + */ +/* HAS_NTOHS: + * This symbol, if defined, indicates that the ntohs() routine (and + * friends htonl() htons() ntohl()) are available to do network + * order byte swapping. + */ +#define HAS_HTONL /**/ +#define HAS_HTONS /**/ +#define HAS_NTOHL /**/ +#define HAS_NTOHS /**/ + +/* HAS_LONG_DOUBLE: + * This symbol will be defined if the C compiler supports long + * doubles. + */ +/* LONG_DOUBLESIZE: + * This symbol contains the size of a long double, so that the + * C preprocessor can make decisions based on it. It is only + * defined if the system supports long doubles. + */ +/*#define HAS_LONG_DOUBLE /**/ +#ifdef HAS_LONG_DOUBLE +#define LONG_DOUBLESIZE 8 /**/ +#endif + +/* HAS_LONG_LONG: + * This symbol will be defined if the C compiler supports long long. + */ +/* LONGLONGSIZE: + * This symbol contains the size of a long long, so that the + * C preprocessor can make decisions based on it. It is only + * defined if the system supports long long. + */ +/*#define HAS_LONG_LONG /**/ +#ifdef HAS_LONG_LONG +#define LONGLONGSIZE 8 /**/ +#endif + +/* HAS_MEMCHR: + * This symbol, if defined, indicates that the memchr routine is available + * to locate characters within a C string. + */ +#define HAS_MEMCHR /**/ + +/* HAS_MMAP: + * This symbol, if defined, indicates that the mmap system call is + * available to map a file into memory. + */ +/* Mmap_t: + * This symbol holds the return type of the mmap() system call + * (and simultaneously the type of the first argument). + * Usually set to 'void *' or 'cadd_t'. + */ +/*#define HAS_MMAP /**/ +#define Mmap_t void * /**/ + +/* HAS_MSG: + * This symbol, if defined, indicates that the entire msg*(2) library is + * supported (IPC mechanism based on message queues). + */ +/*#define HAS_MSG /**/ + +/* HAS_SEM: + * This symbol, if defined, indicates that the entire sem*(2) library is + * supported. + */ +/*#define HAS_SEM /**/ + +/* HAS_SETGRENT: + * This symbol, if defined, indicates that the setgrent routine is + * available for initializing sequential access of the group database. + */ +/*#define HAS_SETGRENT /**/ + +/* HAS_SETGROUPS: + * This symbol, if defined, indicates that the setgroups() routine is + * available to set the list of process groups. If unavailable, multiple + * groups are probably not supported. + */ +/*#define HAS_SETGROUPS /**/ + +/* HAS_SETHOSTENT: + * This symbol, if defined, indicates that the sethostent() routine is + * available. + */ +/*#define HAS_SETHOSTENT /**/ + +/* HAS_SETNETENT: + * This symbol, if defined, indicates that the setnetent() routine is + * available. + */ +/*#define HAS_SETNETENT /**/ + +/* HAS_SETPROTOENT: + * This symbol, if defined, indicates that the setprotoent() routine is + * available. + */ +/*#define HAS_SETPROTOENT /**/ + +/* HAS_SETPWENT: + * This symbol, if defined, indicates that the setpwent routine is + * available for initializing sequential access of the passwd database. + */ +/*#define HAS_SETPWENT /**/ + +/* HAS_SETSERVENT: + * This symbol, if defined, indicates that the setservent() routine is + * available. + */ +/*#define HAS_SETSERVENT /**/ + +/* HAS_SETVBUF: + * This symbol, if defined, indicates that the setvbuf routine is + * available to change buffering on an open stdio stream. + * to a line-buffered mode. + */ +/*#define HAS_SETVBUF /**/ + +/* HAS_SHM: + * This symbol, if defined, indicates that the entire shm*(2) library is + * supported. + */ +/*#define HAS_SHM /**/ + +/* HAS_SOCKET: + * This symbol, if defined, indicates that the BSD socket interface is + * supported. + */ +/* HAS_SOCKETPAIR: + * This symbol, if defined, indicates that the BSD socketpair() call is + * supported. + */ +/* HAS_MSG_CTRUNC: + * This symbol, if defined, indicates that the MSG_CTRUNC is supported. + * Checking just with #ifdef might not be enough because this symbol + * has been known to be an enum. + */ +/* HAS_MSG_DONTROUTE: + * This symbol, if defined, indicates that the MSG_DONTROUTE is supported. + * Checking just with #ifdef might not be enough because this symbol + * has been known to be an enum. + */ +/* HAS_MSG_OOB: + * This symbol, if defined, indicates that the MSG_OOB is supported. + * Checking just with #ifdef might not be enough because this symbol + * has been known to be an enum. + */ +/* HAS_MSG_PEEK: + * This symbol, if defined, indicates that the MSG_PEEK is supported. + * Checking just with #ifdef might not be enough because this symbol + * has been known to be an enum. + */ +/* HAS_MSG_PROXY: + * This symbol, if defined, indicates that the MSG_PROXY is supported. + * Checking just with #ifdef might not be enough because this symbol + * has been known to be an enum. + */ +/* HAS_SCM_RIGHTS: + * This symbol, if defined, indicates that the SCM_RIGHTS is supported. + * Checking just with #ifdef might not be enough because this symbol + * has been known to be an enum. + */ +/* HAS_SENDMSG: + * This symbol, if defined, indicates that the sendmsg is supported + * to send messages between sockets. You will also need struct + * iovec from , HAS_STRUCT_IOVEC and I_SYSUIO. + */ +/* HAS_RECVMSG: + * This symbol, if defined, indicates that the recvmsg is supported + * to send messages between sockets. You will also need struct + * iovec from , HAS_STRUCT_IOVEC and I_SYSUIO. + */ +/* HAS_STRUCT_MSGHDR: + * This symbol, if defined, indicates that the struct msghdr + * (BSD 4.3 or 4.4) is supported. You will also need struct + * iovec from , HAS_STRUCT_IOVEC and I_SYSUIO. + */ +/* HAS_STRUCT_CMSGHDR: + * This symbol, if defined, indicates that the struct cmsghdr + * (BSD 4.4) is supported. You will also need struct + * iovec from , HAS_STRUCT_IOVEC and I_SYSUIO. + */ +#define HAS_SOCKET /**/ +/*#define HAS_SOCKETPAIR /**/ +/*#define HAS_MSG_CTRUNC /**/ +/*#define HAS_MSG_DONTROUTE /**/ +/*#define HAS_MSG_OOB /**/ +/*#define HAS_MSG_PEEK /**/ +/*#define HAS_MSG_PROXY / **/ +/*#define HAS_SCM_RIGHTS /**/ +/*##define HAS_SENDMSG /**/ +/*##define HAS_RECVMSG /**/ +/*##define HAS_STRUCT_MSGHDR /**/ +/*##define HAS_STRUCT_CMSGHDR /**/ + +/* USE_STAT_BLOCKS: + * This symbol is defined if this system has a stat structure declaring + * st_blksize and st_blocks. + */ +#define USE_STAT_BLOCKS /**/ + +/* HAS_STRERROR: + * This symbol, if defined, indicates that the strerror routine is + * available to translate error numbers to strings. See the writeup + * of Strerror() in this file before you try to define your own. + */ +/* HAS_SYS_ERRLIST: + * This symbol, if defined, indicates that the sys_errlist array is + * available to translate error numbers to strings. The extern int + * sys_nerr gives the size of that table. + */ +/* Strerror: + * This preprocessor symbol is defined as a macro if strerror() is + * not available to translate error numbers to strings but sys_errlist[] + * array is there. + */ +#define HAS_STRERROR /**/ +/*##define HAS_SYS_ERRLIST /**/ +#define Strerror(e) strerror(e) + +/* HAS_UNION_SEMUN: + * This symbol, if defined, indicates that the union semun is + * defined by including . If not, the user code + * probably needs to define it as: + * union semun { + * int val; + * struct semid_ds *buf; + * unsigned short *array; + * } + */ +/* USE_SEMCTL_SEMUN: + * This symbol, if defined, indicates that union semun is + * used for semctl IPC_STAT. + */ +/* USE_SEMCTL_SEMID_DS: + * This symbol, if defined, indicates that struct semid_ds * is + * used for semctl IPC_STAT. + */ +/*#define HAS_UNION_SEMUN / **/ +#define USE_SEMCTL_SEMUN /**/ +#define USE_SEMCTL_SEMID_DS /**/ + +/* HAS_VFORK: + * This symbol, if defined, indicates that vfork() exists. + */ +/*#define HAS_VFORK / **/ + +/* Signal_t: + * This symbol's value is either "void" or "int", corresponding to the + * appropriate return type of a signal handler. Thus, you can declare + * a signal handler using "Signal_t (*handler)()", and define the + * handler using "Signal_t handler(sig)". + */ +#define Signal_t void /* Signal handler's return type */ + +/* Groups_t: + * This symbol holds the type used for the second argument to + * getgroups() and setgropus(). Usually, this is the same as + * gidtype (gid_t) , but sometimes it isn't. + * It can be int, ushort, uid_t, etc... + * It may be necessary to include to get any + * typedef'ed information. This is only required if you have + * getgroups() or setgropus().. + */ +#if defined(HAS_GETGROUPS) || defined(HAS_SETGROUPS) +#define Groups_t gid_t /* Type for 2nd arg to [sg]etgroups() */ +#endif + +/* I_GRP: + * This symbol, if defined, indicates to the C program that it should + * include . + */ +/* GRPASSWD: + * This symbol, if defined, indicates to the C program that struct group + * in contains gr_passwd. + */ +/*##define I_GRP /**/ +/*##define GRPASSWD /**/ + +/* I_NETDB: + * This symbol, if defined, indicates that exists and + * should be included. + */ +#define I_NETDB /**/ + +/* I_PWD: + * This symbol, if defined, indicates to the C program that it should + * include . + */ +/* PWQUOTA: + * This symbol, if defined, indicates to the C program that struct passwd + * contains pw_quota. + */ +/* PWAGE: + * This symbol, if defined, indicates to the C program that struct passwd + * contains pw_age. + */ +/* PWCHANGE: + * This symbol, if defined, indicates to the C program that struct passwd + * contains pw_change. + */ +/* PWCLASS: + * This symbol, if defined, indicates to the C program that struct passwd + * contains pw_class. + */ +/* PWEXPIRE: + * This symbol, if defined, indicates to the C program that struct passwd + * contains pw_expire. + */ +/* PWCOMMENT: + * This symbol, if defined, indicates to the C program that struct passwd + * contains pw_comment. + */ +/* PWGECOS: + * This symbol, if defined, indicates to the C program that struct passwd + * contains pw_gecos. + */ +/* PWPASSWD: + * This symbol, if defined, indicates to the C program that struct passwd + * contains pw_passwd. + */ +/*#define I_PWD /**/ +/*#define PWQUOTA /**/ +/*#define PWAGE / **/ +/*#define PWCHANGE / **/ +/*#define PWCLASS / **/ +/*#define PWEXPIRE / **/ +/*#define PWCOMMENT /**/ +/*#define PWGECOS /**/ +/*#define PWPASSWD /**/ + +/* I_SYSUIO: + * This symbol, if defined, indicates that exists and + * should be included. + */ +#/*define I_SYSUIO /**/ + +/* Free_t: + * This variable contains the return type of free(). It is usually + * void, but occasionally int. + */ +/* Malloc_t: + * This symbol is the type of pointer returned by malloc and realloc. + */ +#define Malloc_t void * /**/ +#define Free_t void /**/ + +/* MYMALLOC: + * This symbol, if defined, indicates that we're using our own malloc. + */ +/*#define MYMALLOC / **/ + +/* SIG_NAME: + * This symbol contains a list of signal names in order of + * signal number. This is intended + * to be used as a static array initialization, like this: + * char *sig_name[] = { SIG_NAME }; + * The signals in the list are separated with commas, and each signal + * is surrounded by double quotes. There is no leading SIG in the signal + * name, i.e. SIGQUIT is known as "QUIT". + * Gaps in the signal numbers (up to NSIG) are filled in with NUMnn, + * etc., where nn is the actual signal number (e.g. NUM37). + * The signal number for sig_name[i] is stored in sig_num[i]. + * The last element is 0 to terminate the list with a NULL. This + * corresponds to the 0 at the end of the sig_num list. + */ +/* SIG_NUM: + * This symbol contains a list of signal numbers, in the same order as the + * SIG_NAME list. It is suitable for static array initialization, as in: + * int sig_num[] = { SIG_NUM }; + * The signals in the list are separated with commas, and the indices + * within that list and the SIG_NAME list match, so it's easy to compute + * the signal name from a number or vice versa at the price of a small + * dynamic linear lookup. + * Duplicates are allowed, but are moved to the end of the list. + * The signal number corresponding to sig_name[i] is sig_number[i]. + * if (i < NSIG) then sig_number[i] == i. + * The last element is 0, corresponding to the 0 at the end of + * the sig_name list. + */ +#define SIG_NAME "ZERO", 0 /**/ +#define SIG_NUM 0, 0 /**/ + +/* VOIDFLAGS: + * This symbol indicates how much support of the void type is given by this + * compiler. What various bits mean: + * + * 1 = supports declaration of void + * 2 = supports arrays of pointers to functions returning void + * 4 = supports comparisons between pointers to void functions and + * addresses of void functions + * 8 = suports declaration of generic void pointers + * + * The package designer should define VOIDUSED to indicate the requirements + * of the package. This can be done either by #defining VOIDUSED before + * including config.h, or by defining defvoidused in Myinit.U. If the + * latter approach is taken, only those flags will be tested. If the + * level of void support necessary is not present, defines void to int. + */ +#ifndef VOIDUSED +#define VOIDUSED 15 +#endif +#define VOIDFLAGS 15 +#if (VOIDFLAGS & VOIDUSED) != VOIDUSED +#define void int /* is void to be avoided? */ +#define M_VOID /* Xenix strikes again */ +#endif + +/* ARCHLIB: + * This variable, if defined, holds the name of the directory in + * which the user wants to put architecture-dependent public + * library files for perl5. It is most often a local directory + * such as /usr/local/lib. Programs using this variable must be + * prepared to deal with filename expansion. If ARCHLIB is the + * same as PRIVLIB, it is not defined, since presumably the + * program already searches PRIVLIB. + */ +/* ARCHLIB_EXP: + * This symbol contains the ~name expanded version of ARCHLIB, to be used + * in programs that are not prepared to deal with ~ expansion at run-time. + */ +#define ARCHLIB "/perl/lib/5.00557/epoc" /**/ +#define ARCHLIB_EXP "/perl/lib/5.00557/epoc" /**/ + +/* DLSYM_NEEDS_UNDERSCORE: + * This symbol, if defined, indicates that we need to prepend an + * underscore to the symbol name before calling dlsym(). This only + * makes sense if you *have* dlsym, which we will presume is the + * case if you're using dl_dlopen.xs. + */ +/*#define DLSYM_NEEDS_UNDERSCORE / **/ + +/* HAS_FSEEKO: + * This symbol, if defined, indicates that the fseeko routine is + * available to fseek beyond 32 bits (useful for ILP32 hosts). + */ +/*#define HAS_FSEEKO / **/ + +/* HAS_FTELLO: + * This symbol, if defined, indicates that the ftello routine is + * available to ftell from beyond 32 bits (useful for ILP32 hosts). + */ +/*#define HAS_FTELLO / **/ + +/* HAS_GETMNTENT: + * This symbol, if defined, indicates that the getmntent routine is + * available to iterate through mounted file systems. + */ +/*#define HAS_GETMNTENT / **/ + +/* HAS_HASMNTOPT: + * This symbol, if defined, indicates that the hasmntopt routine is + * available to query the mount options of file systems. + */ +/*#define HAS_HASMNTOPT / **/ + +/* HAS_MADVISE: + * This symbol, if defined, indicates that the madvise system call is + * available to map a file into memory. + */ +/*#define HAS_MADVISE /**/ + +/* HAS_MPROTECT: + * This symbol, if defined, indicates that the mprotect system call is + * available to modify the access protection of a memory mapped file. + */ +/*#define HAS_MPROTECT /**/ + +/* HAS_READV: + * This symbol, if defined, indicates that the readv routine is + * available to do gather reads. You will also need + * and there I_SYSUIO. + */ +/*#define HAS_READV /**/ + +/* USE_SFIO: + * This symbol, if defined, indicates that sfio should + * be used. + */ +/*#define USE_SFIO / **/ + +/* HAS_FSTATFS: + * This symbol, if defined, indicates that the fstatfs routine is + * available to stat filesystems of file descriptors. + */ +/* HAS_STRUCT_STATFS_FLAGS: + * This symbol, if defined, indicates that the struct statfs + * does have the f_flags member containing the mount flags of + * the filesystem holding the file. + * This kind of struct statfs is coming from sys/mount.h (BSD), + * not from sys/statfs.h (SYSV). + */ +#define HAS_FSTATFS /**/ +#define HAS_STRUCT_STATFS_FLAGS /**/ + +/* HAS_FSTATVFS: + * This symbol, if defined, indicates that the fstatvfs routine is + * available to stat filesystems of file descriptors. + */ +/*#define HAS_FSTATVFS /**/ + +/* HAS_TELLDIR_PROTO: + * This symbol, if defined, indicates that the system provides + * a prototype for the telldir() function. Otherwise, it is up + * to the program to supply one. A good guess is + * extern long telldir _((DIR*)); + */ +#define HAS_TELLDIR_PROTO /**/ + +/* HAS_WRITEV: + * This symbol, if defined, indicates that the writev routine is + * available to do scatter writes. + */ +/*#define HAS_WRITEV /**/ + +/* HAS_DBMINIT64: + * This symbol, if defined, indicates that the dbminit64 routine is + * available to open dbm files larger than 2 gigabytes. + */ +/* HAS_DBMCLOSE64: + * This symbol, if defined, indicates that the dbmclose64 routine is + * available to close dbm files larger than 2 gigabytes. + */ +/* HAS_FETCH64: + * This symbol, if defined, indicates that the fetch64 routine is + * available to fetch from dbm files larger than 2 gigabytes. + */ +/* HAS_STORE64: + * This symbol, if defined, indicates that the store64 routine is + * available to store to dbm files larger than 2 gigabytes. + */ +/* HAS_DELETE64: + * This symbol, if defined, indicates that the delete64 routine is + * available to delete from dbm files larger than 2 gigabytes. + */ +/* HAS_FIRSTKEY64: + * This symbol, if defined, indicates that the firstkey64 routine is + * available to firstkey in dbm files larger than 2 gigabytes. + */ +/* HAS_NEXTKEY64: + * This symbol, if defined, indicates that the nextkey64 routine is + * available to nextkey in dbm files larger than 2 gigabytes. + */ +/*#define HAS_DBMINIT64 / **/ +/*#define HAS_DBMCLOSE64 / **/ +/*#define HAS_FETCH64 / **/ +/*#define HAS_STORE64 / **/ +/*#define HAS_DELETE64 / **/ +/*#define HAS_FIRSTKEY64 / **/ +/*#define HAS_NEXTKEY64 / **/ + +/* USE_DYNAMIC_LOADING: + * This symbol, if defined, indicates that dynamic loading of + * some sort is available. + */ +/*#define USE_DYNAMIC_LOADING /**/ + +/* FFLUSH_NULL: + * This symbol, if defined, tells that fflush(NULL) does flush + * all pending stdio output. + */ +/* FFLUSH_ALL: + * This symbol, if defined, tells that to flush + * all pending stdio output one must loop through all + * the stdio file handles stored in an array and fflush them. + * Note that if fflushNULL is defined, fflushall will not + * even be probed for and will be left undefined. + */ +/*#define FFLUSH_NULL /**/ +#define FFLUSH_ALL / **/ + +/* DB_Prefix_t: + * This symbol contains the type of the prefix structure element + * in the header file. In older versions of DB, it was + * int, while in newer ones it is u_int32_t. + */ +/* DB_Hash_t: + * This symbol contains the type of the prefix structure element + * in the header file. In older versions of DB, it was + * int, while in newer ones it is size_t. + */ +/*#define DB_Hash_t u_int32_t /**/ +/*#define DB_Prefix_t size_t /**/ + +/* I_INTTYPES: + * This symbol, if defined, indicates to the C program that it should + * include . + */ +/* HAS_INT64_T: + * This symbol will defined if the C compiler supports int64_t. + * Usually the needs to be included, but sometimes + * is enough. + */ +/*#define I_INTTYPES / **/ +/*#define HAS_INT64_T / **/ + +/* I_MNTENT: + * This symbol, if defined, indicates that exists and + * should be included. + */ +/*#define I_MNTENT / **/ + +/* I_NETINET_TCP: + * This symbol, if defined, indicates to the C program that it should + * include . + */ +#define I_NETINET_TCP /**/ + +/* I_POLL: + * This symbol, if defined, indicates that exists and + * should be included. + */ +/*#define I_POLL /**/ + +/* I_SYS_MMAN: + * This symbol, if defined, indicates that exists and + * should be included. + */ +/*#define I_SYS_MMAN /**/ + +/* I_SYS_MOUNT: + * This symbol, if defined, indicates that exists and + * should be included. + */ +/*#define I_SYS_MOUNT /**/ + +/* I_SYS_STATVFS: + * This symbol, if defined, indicates that exists and + * should be included. + */ +/*#define I_SYS_STATVFS /**/ + +/* INSTALL_USR_BIN_PERL: + * This symbol, if defined, indicates that Perl is to be installed + * also as /usr/bin/perl. + */ +/*#define INSTALL_USR_BIN_PERL /**/ + +/* HAS_FSTAT64: + * This symbol, if defined, indicates that the fstat64 routine is + * available to stat files (fds) larger than 2 gigabytes. + */ +/* HAS_FTRUNCATE64: + * This symbol, if defined, indicates that the ftruncate64 routine is + * available to tell files larger than 2 gigabytes. + */ +/* HAS_LSEEK64: + * This symbol, if defined, indicates that the lseek64 routine is + * available to seek files larger than 2 gigabytes. + */ +/* HAS_LSTAT64: + * This symbol, if defined, indicates that the lstat64 routine is + * available to stat files (symlinks) larger than 2 gigabytes. + */ +/* HAS_OPEN64: + * This symbol, if defined, indicates that the open64 routine is + * available to open files larger than 2 gigabytes. + */ +/* HAS_OPENDIR64: + * This symbol, if defined, indicates that the opendir64 routine is + * available to opendir files larger than 2 gigabytes. + */ +/* HAS_READDIR64: + * This symbol, if defined, indicates that the readdir64 routine is + * available to readdir files larger than 2 gigabytes. + */ +/* HAS_SEEKDIR64: + * This symbol, if defined, indicates that the seekdir64 routine is + * available to seekdir files larger than 2 gigabytes. + */ +/* HAS_STAT64: + * This symbol, if defined, indicates that the stat64 routine is + * available to stat files larger than 2 gigabytes. + */ +/* HAS_TELLDIR64: + * This symbol, if defined, indicates that the telldir64 routine is + * available to telldir files larger than 2 gigabytes. + */ +/* HAS_TRUNCATE64: + * This symbol, if defined, indicates that the truncate64 routine is + * available to truncate files larger than 2 gigabytes. + */ +/* HAS_OFF64_T: + * This symbol will be defined if the C compiler supports off64_t. + */ +/* HAS_STRUCT_DIRENT64: + * This symbol will be defined if the C compiler supports struct dirent64. + */ +/*#define HAS_FSTAT64 / **/ +/*#define HAS_FTRUNCATE64 / **/ +/*#define HAS_LSEEK64 / **/ +/*#define HAS_LSTAT64 / **/ +/*#define HAS_OPEN64 / **/ +/*#define HAS_OPENDIR64 / **/ +/*#define HAS_READDIR64 / **/ +/*#define HAS_SEEKDIR64 / **/ +/*#define HAS_STAT64 / **/ +/*#define HAS_TELLDIR64 / **/ +/*#define HAS_TRUNCATE64 / **/ +/*#define HAS_OFF64_T / **/ +/*#define HAS_STRUCT_DIRENT64 / **/ + +/* PRIVLIB: + * This symbol contains the name of the private library for this package. + * The library is private in the sense that it needn't be in anyone's + * execution path, but it should be accessible by the world. The program + * should be prepared to do ~ expansion. + */ +/* PRIVLIB_EXP: + * This symbol contains the ~name expanded version of PRIVLIB, to be used + * in programs that are not prepared to deal with ~ expansion at run-time. + */ +#define PRIVLIB "/perl/lib/5.00557" /**/ +#define PRIVLIB_EXP "/perl/lib/5.00557" /**/ + +/* SELECT_MIN_BITS: + * This symbol holds the minimum number of bits operated by select. + * That is, if you do select(n, ...), how many bits at least will be + * cleared in the masks if some activity is detected. Usually this + * is either n or 32*ceil(n/32), especially many little-endians do + * the latter. This is only useful if you have select(), naturally. + */ +#define SELECT_MIN_BITS 32 /**/ + +/* SITEARCH: + * This symbol contains the name of the private library for this package. + * The library is private in the sense that it needn't be in anyone's + * execution path, but it should be accessible by the world. The program + * should be prepared to do ~ expansion. + * The standard distribution will put nothing in this directory. + * Individual sites may place their own extensions and modules in + * this directory. + */ +/* SITEARCH_EXP: + * This symbol contains the ~name expanded version of SITEARCH, to be used + * in programs that are not prepared to deal with ~ expansion at run-time. + */ +#define SITEARCH "/perl/lib/site_perl/5.00556/epoc" /**/ +#define SITEARCH_EXP "/perl/lib/site_perl/5.00557/epoc" /**/ + +/* SITELIB: + * This symbol contains the name of the private library for this package. + * The library is private in the sense that it needn't be in anyone's + * execution path, but it should be accessible by the world. The program + * should be prepared to do ~ expansion. + * The standard distribution will put nothing in this directory. + * Individual sites may place their own extensions and modules in + * this directory. + */ +/* SITELIB_EXP: + * This symbol contains the ~name expanded version of SITELIB, to be used + * in programs that are not prepared to deal with ~ expansion at run-time. + */ +#define SITELIB "/perl/lib/site_perl/5.00557" /**/ +#define SITELIB_EXP "/perl/lib/site_perl/5.00557" /**/ + +/* STARTPERL: + * This variable contains the string to put in front of a perl + * script to make sure (one hopes) that it runs with perl and not + * some shell. + */ +#define STARTPERL "#!/opt/perl/bin/perl" /**/ + +/* HAS_FGETPOS64: + * This symbol, if defined, indicates that the fgetpos64 routine is + * available to getpos files larger than 2 gigabytes. + */ +/* HAS_FOPEN64: + * This symbol, if defined, indicates that the fopen64 routine is + * available to open files larger than 2 gigabytes. + */ +/* HAS_FREOPEN64: + * This symbol, if defined, indicates that the freopen64 routine is + * available to reopen files larger than 2 gigabytes. + */ +/* HAS_FSEEK64: + * This symbol, if defined, indicates that the fseek64 routine is + * available to seek files larger than 2 gigabytes. + */ +/* HAS_FSEEKO64: + * This symbol, if defined, indicates that the fseeko64 routine is + * available to seek files larger than 2 gigabytes. + */ +/* HAS_FSETPOS64: + * This symbol, if defined, indicates that the fsetpos64 routine is + * available to setpos files larger than 2 gigabytes. + */ +/* HAS_FTELL64: + * This symbol, if defined, indicates that the ftell64 routine is + * available to tell files larger than 2 gigabytes. + */ +/* HAS_FTELLO64: + * This symbol, if defined, indicates that the ftello64 routine is + * available to tell files larger than 2 gigabytes. + */ +/* HAS_TMPFILE64: + * This symbol, if defined, indicates that the tmpfile64 routine is + * available to tmpfile files larger than 2 gigabytes. + */ +/*#define HAS_FGETPOS64 / **/ +/*#define HAS_FOPEN64 / **/ +/*#define HAS_FREOPEN64 / **/ +/*#define HAS_FSEEK64 / **/ +/*#define HAS_FSEEKO64 / **/ +/*#define HAS_FSETPOS64 / **/ +/*#define HAS_FTELL64 / **/ +/*#define HAS_FTELLO64 / **/ +/*#define HAS_TMPFILE64 / **/ + +/* HAS_STDIO_STREAM_ARRAY: + * This symbol, if defined, tells that there is an array + * holding the stdio streams. + */ +/* STDIO_STREAM_ARRAY: + * This symbol tells the name of the array holding the stdio streams. + * Usual values include _iob, __iob, and __sF. + */ +/*#define HAS_STDIO_STREAM_ARRAY /**/ +/*#define STDIO_STREAM_ARRAY _iob + +/* USE_64_BITS: + * This symbol, if defined, indicates that 64-bit interfaces should + * be used when available. If not defined, the native default interfaces + * will be used (be they 32 or 64 bits). + */ +/*#define USE_64_BITS /**/ + +/* MULTIPLICITY: + * This symbol, if defined, indicates that Perl should + * be built to use multiplicity. + */ +/*#define MULTIPLICITY / **/ + +/* USE_PERLIO: + * This symbol, if defined, indicates that the PerlIO abstraction should + * be used throughout. If not defined, stdio should be + * used in a fully backward compatible manner. + */ +/*#define USE_PERLIO / **/ + +/* HAS_DRAND48_PROTO: + * This symbol, if defined, indicates that the system provides + * a prototype for the drand48() function. Otherwise, it is up + * to the program to supply one. A good guess is + * extern double drand48 _((void)); + */ +#define HAS_DRAND48_PROTO /**/ + +/* HAS_GETHOST_PROTOS: + * This symbol, if defined, indicates that includes + * prototypes for gethostent(), gethostbyname(), and + * gethostbyaddr(). Otherwise, it is up to the program to guess + * them. See netdbtype.U for probing for various Netdb_xxx_t types. + */ +#define HAS_GETHOST_PROTOS /**/ + +/* HAS_GETNET_PROTOS: + * This symbol, if defined, indicates that includes + * prototypes for getnetent(), getnetbyname(), and + * getnetbyaddr(). Otherwise, it is up to the program to guess + * them. See netdbtype.U for probing for various Netdb_xxx_t types. + */ +#define HAS_GETNET_PROTOS /**/ + +/* HAS_GETPROTO_PROTOS: + * This symbol, if defined, indicates that includes + * prototypes for getprotoent(), getprotobyname(), and + * getprotobyaddr(). Otherwise, it is up to the program to guess + * them. See netdbtype.U for probing for various Netdb_xxx_t types. + */ +#define HAS_GETPROTO_PROTOS /**/ + +/* HAS_GETSERV_PROTOS: + * This symbol, if defined, indicates that includes + * prototypes for getservent(), getservbyname(), and + * getservbyaddr(). Otherwise, it is up to the program to guess + * them. See netdbtype.U for probing for various Netdb_xxx_t types. + */ +#define HAS_GETSERV_PROTOS /**/ + +/* Netdb_host_t: + * This symbol holds the type used for the 1st argument + * to gethostbyaddr(). + */ +/* Netdb_hlen_t: + * This symbol holds the type used for the 2nd argument + * to gethostbyaddr(). + */ +/* Netdb_name_t: + * This symbol holds the type used for the argument to + * gethostbyname(). + */ +/* Netdb_net_t: + * This symbol holds the type used for the 1st argument to + * getnetbyaddr(). + */ +#define Netdb_host_t const char * /**/ +#define Netdb_hlen_t int /**/ +#define Netdb_name_t const char * /**/ +#define Netdb_net_t int /**/ + +/* Select_fd_set_t: + * This symbol holds the type used for the 2nd, 3rd, and 4th + * arguments to select. Usually, this is 'fd_set *', if HAS_FD_SET + * is defined, and 'int *' otherwise. This is only useful if you + * have select(), of course. + */ +#define Select_fd_set_t fd_set * /**/ + +/* ARCHNAME: + * This symbol holds a string representing the architecture name. + * It may be used to construct an architecture-dependant pathname + * where library files may be held under a private library, for + * instance. + */ +#define ARCHNAME "epoc" /**/ + +/* OLD_PTHREAD_CREATE_JOINABLE: + * This symbol, if defined, indicates how to create pthread + * in joinable (aka undetached) state. NOTE: not defined + * if pthread.h already has defined PTHREAD_CREATE_JOINABLE + * (the new version of the constant). + * If defined, known values are PTHREAD_CREATE_UNDETACHED + * and __UNDETACHED. + */ +/*#define OLD_PTHREAD_CREATE_JOINABLE / **/ + +/* HAS_PTHREAD_YIELD: + * This symbol, if defined, indicates that the pthread_yield + * routine is available to yield the execution of the current + * thread. sched_yield is preferable to pthread_yield. + */ +/* SCHED_YIELD: + * This symbol defines the way to yield the execution of + * the current thread. Known ways are sched_yield, + * pthread_yield, and pthread_yield with NULL. + */ +/* HAS_SCHED_YIELD: + * This symbol, if defined, indicates that the sched_yield + * routine is available to yield the execution of the current + * thread. sched_yield is preferable to pthread_yield. + */ +/*#define HAS_PTHREAD_YIELD / **/ +/*#define SCHED_YIELD sched_yield() /**/ +/*#define HAS_SCHED_YIELD /**/ + +/* I_MACH_CTHREADS: + * This symbol, if defined, indicates to the C program that it should + * include . + */ +/*#define I_MACH_CTHREADS / **/ + +/* USE_THREADS: + * This symbol, if defined, indicates that Perl should + * be built to use threads. + */ +/* OLD_PTHREADS_API: + * This symbol, if defined, indicates that Perl should + * be built to use the old draft POSIX threads API. + */ +/*#define USE_THREADS /**/ +/*#define OLD_PTHREADS_API / **/ + +/* Time_t: + * This symbol holds the type returned by time(). It can be long, + * or time_t on BSD sites (in which case should be + * included). + */ +#define Time_t time_t /* Time type */ + +/* HAS_TIMES: + * This symbol, if defined, indicates that the times() routine exists. + * Note that this became obsolete on some systems (SUNOS), which now + * use getrusage(). It may be necessary to include . + */ +/*#define HAS_TIMES /**/ + +/* Fpos_t: + * This symbol holds the type used to declare file positions in libc. + * It can be fpos_t, long, uint, etc... It may be necessary to include + * to get any typedef'ed information. + */ +#define Fpos_t fpos_t /* File position type */ + +/* Gid_t: + * This symbol holds the return type of getgid() and the type of + * argument to setrgid() and related functions. Typically, + * it is the type of group ids in the kernel. It can be int, ushort, + * uid_t, etc... It may be necessary to include to get + * any typedef'ed information. + */ +#define Gid_t gid_t /* Type for getgid(), etc... */ + +/* Off_t: + * This symbol holds the type used to declare offsets in the kernel. + * It can be int, long, off_t, etc... It may be necessary to include + * to get any typedef'ed information. + */ +/* LSEEKSIZE: + * This symbol holds the number of bytes used by the Off_t. + */ +#define Off_t off_t /* type */ +#define LSEEKSIZE 8 /* size */ + +/* Mode_t: + * This symbol holds the type used to declare file modes + * for systems calls. It is usually mode_t, but may be + * int or unsigned short. It may be necessary to include + * to get any typedef'ed information. + */ +#define Mode_t mode_t /* file mode parameter for system calls */ + +/* Pid_t: + * This symbol holds the type used to declare process ids in the kernel. + * It can be int, uint, pid_t, etc... It may be necessary to include + * to get any typedef'ed information. + */ +#define Pid_t pid_t /* PID type */ + +/* Size_t: + * This symbol holds the type used to declare length parameters + * for string functions. It is usually size_t, but may be + * unsigned long, int, etc. It may be necessary to include + * to get any typedef'ed information. + */ +#define Size_t size_t /* length paramater for string functions */ + +/* Uid_t: + * This symbol holds the type used to declare user ids in the kernel. + * It can be int, ushort, uid_t, etc... It may be necessary to include + * to get any typedef'ed information. + */ +#define Uid_t uid_t /* UID type */ + +#endif diff --git a/epoc/epoc.c b/epoc/epoc.c new file mode 100644 index 0000000..a7c7e10 --- /dev/null +++ b/epoc/epoc.c @@ -0,0 +1,61 @@ +/* Epoc helper Routines */ + +#include + +int getgid() {return 0;} +int getegid() {return 0;} +int geteuid() {return 0;} +int getuid() {return 0;} +int setgid() {return -1;} +int setuid() {return -1;} + + +char *environ; + +int Perl_my_popen( int a, int b) { + return 0; +} +int Perl_my_pclose( int a) { + return 0; +} + +kill() {} +signal() {} + +void execv() {} +void execvp() {} + + +void do_spawn() {} +void do_aspawn() {} +void Perl_do_exec() {} + +#ifdef __MARM__ +/* Symbian forgot to include __fixunsdfi into the MARM euser.lib */ +/* This is from libgcc2.c , gcc-2.7.2.3 */ + +typedef unsigned int UQItype __attribute__ ((mode (QI))); +typedef int SItype __attribute__ ((mode (SI))); +typedef unsigned int USItype __attribute__ ((mode (SI))); +typedef int DItype __attribute__ ((mode (DI))); +typedef unsigned int UDItype __attribute__ ((mode (DI))); + +typedef float SFtype __attribute__ ((mode (SF))); +typedef float DFtype __attribute__ ((mode (DF))); + + + +extern DItype __fixunssfdi (SFtype a); +extern DItype __fixunsdfdi (DFtype a); + + +USItype +__fixunsdfsi (a) + DFtype a; +{ + if (a >= - (DFtype) (- 2147483647L -1) ) + return (SItype) (a + (- 2147483647L -1) ) - (- 2147483647L -1) ; + return (SItype) a; +} + +#endif diff --git a/epoc/epocish.h b/epoc/epocish.h new file mode 100644 index 0000000..010dc69 --- /dev/null +++ b/epoc/epocish.h @@ -0,0 +1,136 @@ +/* + * The following symbols are defined if your operating system supports + * functions by that name. All Unixes I know of support them, thus they + * are not checked by the configuration script, but are directly defined + * here. + */ + +/* HAS_IOCTL: + * This symbol, if defined, indicates that the ioctl() routine is + * available to set I/O characteristics + */ +#define HAS_IOCTL / **/ + +/* HAS_UTIME: + * This symbol, if defined, indicates that the routine utime() is + * available to update the access and modification times of files. + */ +/* #define HAS_UTIME / **/ + +/* HAS_GROUP + * This symbol, if defined, indicates that the getgrnam() and + * getgrgid() routines are available to get group entries. + * The getgrent() has a separate definition, HAS_GETGRENT. + */ +/* #define HAS_GROUP / **/ + +/* HAS_PASSWD + * This symbol, if defined, indicates that the getpwnam() and + * getpwuid() routines are available to get password entries. + * The getpwent() has a separate definition, HAS_GETPWENT. + */ +/* #define HAS_PASSWD / **/ + +/* #define HAS_KILL */ +#define HAS_WAIT + +/* USEMYBINMODE + * This symbol, if defined, indicates that the program should + * use the routine my_binmode(FILE *fp, char iotype) to insure + * that a file is in "binary" mode -- that is, that no translation + * of bytes occurs on read or write operations. + */ +#undef USEMYBINMODE + +/* Stat_t: + * This symbol holds the type used to declare buffers for information + * returned by stat(). It's usually just struct stat. It may be necessary + * to include and to get any typedef'ed + * information. + */ +#define Stat_t struct stat + +/* USE_STAT_RDEV: + * This symbol is defined if this system has a stat structure declaring + * st_rdev + */ +#define USE_STAT_RDEV / **/ + +/* ACME_MESS: + * This symbol, if defined, indicates that error messages should be + * should be generated in a format that allows the use of the Acme + * GUI/editor's autofind feature. + */ +#undef ACME_MESS /**/ + +/* UNLINK_ALL_VERSIONS: + * This symbol, if defined, indicates that the program should arrange + * to remove all versions of a file if unlink() is called. This is + * probably only relevant for VMS. + */ +/* #define UNLINK_ALL_VERSIONS / **/ + +/* VMS: + * This symbol, if defined, indicates that the program is running under + * VMS. It is currently automatically set by cpps running under VMS, + * and is included here for completeness only. + */ +/* #define VMS / **/ + +/* ALTERNATE_SHEBANG: + * This symbol, if defined, contains a "magic" string which may be used + * as the first line of a Perl program designed to be executed directly + * by name, instead of the standard Unix #!. If ALTERNATE_SHEBANG + * begins with a character other then #, then Perl will only treat + * it as a command line if if finds the string "perl" in the first + * word; otherwise it's treated as the first line of code in the script. + * (IOW, Perl won't hand off to another interpreter via an alternate + * shebang sequence that might be legal Perl code.) + */ +/* #define ALTERNATE_SHEBANG "#!" / **/ + +#if !defined(NSIG) || defined(M_UNIX) || defined(M_XENIX) || defined(__NetBSD__) +# include +#endif + +#ifndef SIGABRT +# define SIGABRT SIGILL +#endif +#ifndef SIGILL +# define SIGILL 6 /* blech */ +#endif +#define ABORT() abort(); + +/* + * fwrite1() should be a routine with the same calling sequence as fwrite(), + * but which outputs all of the bytes requested as a single stream (unlike + * fwrite() itself, which on some systems outputs several distinct records + * if the number_of_items parameter is >1). + */ +#define fwrite1 fwrite + +#define Stat(fname,bufptr) stat((fname),(bufptr)) +#define Fstat(fd,bufptr) fstat((fd),(bufptr)) +#define Fflush(fp) fflush(fp) +#define Mkdir(path,mode) mkdir((path),(mode)) + +/* these should be set in a hint file, not here */ +#ifndef PERL_SYS_INIT +#ifdef PERL_SCO5 +# define PERL_SYS_INIT(c,v) fpsetmask(0); MALLOC_INIT +#else +# ifdef POSIX_BC +# define PERL_SYS_INIT(c,v) sigignore(SIGFPE); MALLOC_INIT +# else +# define PERL_SYS_INIT(c,v) MALLOC_INIT +# endif +#endif +#endif + +#ifndef PERL_SYS_TERM +#define PERL_SYS_TERM() MALLOC_TERM +#endif + +#define BIT_BUCKET "NUL:" + +#define dXSUB_SYS diff --git a/epoc/perl.mmp b/epoc/perl.mmp new file mode 100644 index 0000000..30c97fd --- /dev/null +++ b/epoc/perl.mmp @@ -0,0 +1,19 @@ +target perl.exe +targettype exe +uid 0x010 0 +unicodeuid 0x010 0 +project perl5.005 +subproject perl5.005_57 + +SOURCE av.c byterun.c deb.c doio.c doop.c dump.c globals.c gv.c hv.c mg.c miniperlmain.c op.c perl.c perlio.c perly.c pp.c pp_ctl.c pp_hot.c pp_sys.c regcomp.c regexec.c run.c scope.c sv.c taint.c toke.c universal.c utf8.c util.c epoc.c +systeminclude \epoc32\include\libc \epoc32\include + +#if defined(MARM) +LIBRARY ecrt0.o +#else +LIBRARY ecrt0.obj +#endif + +epocstacksize 49152 + +LIBRARY estlib.lib euser.lib diff --git a/epoc/perl.pkg b/epoc/perl.pkg new file mode 100644 index 0000000..c24945b --- /dev/null +++ b/epoc/perl.pkg @@ -0,0 +1,7 @@ +#{"perl5.005"},(0x010),57,5,0 +; Installation with an embedded .sis file +"\epoc32\release\marm\rel\perl.exe"-"!:\perl.exe" +"\perl5.005\perl5.005_57\lib\perl5db.pl"-"!:\perl\lib\5.00557\perl5db.pl" +"\perl5.005\perl5.005_57\lib\Term\ReadLine.pm"-"!:\perl\lib\5.00557\Term\ReadLine.pm" +; Component .sis files +@"\epoc32\release\marm\rel\stdlib.sis",(0x010002c3) diff --git a/lib/Term/ReadLine.pm b/lib/Term/ReadLine.pm index e7cf00c..8bb8205 100644 --- a/lib/Term/ReadLine.pm +++ b/lib/Term/ReadLine.pm @@ -193,7 +193,7 @@ sub findConsole { $console = "sys\$command"; } - if (($^O eq 'amigaos') || ($^O eq 'beos')) { + if (($^O eq 'amigaos') || ($^O eq 'beos') || ($^O eq 'epoc')) { $console = undef; } elsif ($^O eq 'os2') { diff --git a/lib/perl5db.pl b/lib/perl5db.pl index f6b0ecb..18d52dc 100644 --- a/lib/perl5db.pl +++ b/lib/perl5db.pl @@ -316,6 +316,10 @@ if ($notty) { $console = undef; } + if ($^O eq 'epoc') { + $console = undef; + } + $console = $tty if defined $tty; if (defined $console) { diff --git a/perl.c b/perl.c index 4c1eecc..cb3abdd 100644 --- a/perl.c +++ b/perl.c @@ -2681,7 +2681,7 @@ S_init_postdump_symbols(pTHX_ register int argc, register char **argv, register GvMULTI_on(PL_envgv); hv = GvHVn(PL_envgv); hv_magic(hv, PL_envgv, 'E'); -#ifndef VMS /* VMS doesn't have environ array */ +#if !defined( VMS) && !defined(EPOC) /* VMS doesn't have environ array */ /* Note that if the supplied env parameter is actually a copy of the global environ then it may now point to free'd memory if the environment has been modified since. To avoid this diff --git a/perl.h b/perl.h index f61ff9b..5d19c63 100644 --- a/perl.h +++ b/perl.h @@ -285,11 +285,11 @@ register struct op *Perl_op asm(stringify(OP_IN_REGISTER)); #define DOSISH 1 #endif -#if defined(__STDC__) || defined(vax11c) || defined(_AIX) || defined(__stdc__) || defined(__cplusplus) +#if defined(__STDC__) || defined(vax11c) || defined(_AIX) || defined(__stdc__) || defined(__cplusplus) || defined( EPOC) # define STANDARD_C 1 #endif -#if defined(__cplusplus) || defined(WIN32) || defined(__sgi) || defined(OS2) || defined(__DGUX) +#if defined(__cplusplus) || defined(WIN32) || defined(__sgi) || defined(OS2) || defined(__DGUX) || defined( EPOC) # define DONT_DECLARE_STD 1 #endif @@ -1386,7 +1386,11 @@ typedef union any ANY; # if defined(__VOS__) # include "vosish.h" # else -# include "unixish.h" +# if defined(EPOC) +# include "epocish.h" +# else +# include "unixish.h" +# endif # endif # endif # endif @@ -1875,7 +1879,9 @@ char *crypt (const char*, const char*); # ifndef getenv char *getenv (const char*); # endif /* !getenv */ +#ifndef EPOC Off_t lseek (int,Off_t,int); +#endif # endif /* !DONT_DECLARE_STD */ char *getlogin (void); #endif /* !__cplusplus */ @@ -1971,7 +1977,7 @@ EXT char *** environ_pointer; # if !defined(DONT_DECLARE_STD) || \ (defined(__svr4__) && defined(__GNUC__) && defined(sun)) || \ defined(__sgi) || \ - defined(__DGUX) + defined(__DGUX) || defined(EPOC) extern char ** environ; /* environment variables supplied via exec */ # endif # endif diff --git a/sv.c b/sv.c index 5fad33e..282baf9 100644 --- a/sv.c +++ b/sv.c @@ -3648,8 +3648,16 @@ thats_really_all_folks: } else { +#ifndef EPOC /*The big, slow, and stupid way */ STDCHAR buf[8192]; +#else + /* Need to work around EPOC SDK features */ + /* On WINS: MS VC5 generates calls to _chkstk, */ + /* if a `large' stack frame is allocated */ + /* gcc on MARM does not generate calls like these */ + STDCHAR buf[1024]; +#endif screamer2: if (rslen) { diff --git a/util.c b/util.c index 582a797..1f6fa1e 100644 --- a/util.c +++ b/util.c @@ -2128,7 +2128,7 @@ VTOH(vtohl,long) #endif /* VMS' my_popen() is in VMS.c, same with OS/2. */ -#if (!defined(DOSISH) || defined(HAS_FORK) || defined(AMIGAOS)) && !defined(VMS) && !defined(__OPEN_VM) +#if (!defined(DOSISH) || defined(HAS_FORK) || defined(AMIGAOS)) && !defined(VMS) && !defined(__OPEN_VM) && !defined(EPOC) PerlIO * Perl_my_popen(pTHX_ char *cmd, char *mode) { @@ -2419,7 +2419,7 @@ Perl_rsignal_restore(pTHX_ int signo, Sigsave_t *save) #endif /* !HAS_SIGACTION */ /* VMS' my_pclose() is in VMS.c; same with OS/2 */ -#if (!defined(DOSISH) || defined(HAS_FORK) || defined(AMIGAOS)) && !defined(VMS) && !defined(__OPEN_VM) +#if (!defined(DOSISH) || defined(HAS_FORK) || defined(AMIGAOS)) && !defined(VMS) && !defined(__OPEN_VM) && !defined(EPOC) I32 Perl_my_pclose(pTHX_ PerlIO *ptr) {