-#
-# Makefile to build perl on Windows NT using Microsoft NMAKE.
-# Supported compilers:
-# Visual C++ 5.x (possibly other versions)
-#
-# This is set up to build a perl.exe that runs off a shared library
-# (perl57.dll). Also makes individual DLLs for the XS extensions.
-#
-
-##
-## Make sure you read README.win32 *before* you mess with anything here!
-##
-
-##
-## Build configuration. Edit the values below to suit your needs.
-##
-
-#
-# Set these to wherever you want "nmake install" to put your
-# newly built perl.
-#
-INST_DRV = c:
-INST_TOP = $(INST_DRV)\perl
-
-#
-# Comment this out if you DON'T want your perl installation to be versioned.
-# This means that the new installation will overwrite any files from the
-# old installation at the same INST_TOP location. Leaving it enabled is
-# the safest route, as perl adds the extra version directory to all the
-# locations it installs files to. If you disable it, an alternative
-# versioned installation can be obtained by setting INST_TOP above to a
-# path that includes an arbitrary version string.
-#
-#INST_VER = \5.7.2
-
-#
-# Comment this out if you DON'T want your perl installation to have
-# architecture specific components. This means that architecture-
-# specific files will be installed along with the architecture-neutral
-# files. Leaving it enabled is safer and more flexible, in case you
-# want to build multiple flavors of perl and install them together in
-# the same location. Commenting it out gives you a simpler
-# installation that is easier to understand for beginners.
-#
-#INST_ARCH = \$(ARCHNAME)
-
-#
-# uncomment to enable multiple interpreters. This is need for fork()
-# emulation.
-#
-USE_MULTI = define
-
-#
-# Beginnings of interpreter cloning/threads; still very incomplete.
-# This should be enabled to get the fork() emulation. This needs
-# USE_MULTI as well.
-#
-USE_ITHREADS = define
-
-#
-# uncomment to enable the implicit "host" layer for all system calls
-# made by perl. This needs USE_MULTI above. This is also needed to
-# get fork().
-#
-USE_IMP_SYS = define
-
-#
-# uncomment to enable the experimental PerlIO I/O subsystem.
-USE_PERLIO = define
-
-#
-# WARNING! This option is deprecated and will eventually go away (enable
-# USE_ITHREADS instead).
-#
-# uncomment to enable threads-capabilities. This is incompatible with
-# USE_ITHREADS, and is only here for people who may have come to rely
-# on the experimental Thread support that was in 5.005.
-#
-#USE_5005THREADS = define
-
-#
-# uncomment one of the following lines if you are using either
-# Visual C++ 2.x or Visual C++ 6.x (aka Visual Studio 98)
-#
-#CCTYPE = MSVC20
-#CCTYPE = MSVC60
-
-#
-# uncomment next line if you want debug version of perl (big,slow)
-#
-#CFG = Debug
-
-#
-# uncomment to enable use of PerlCRT.DLL when using the Visual C compiler.
-# It has patches that fix known bugs in older versions of MSVCRT.DLL.
-# This currently requires VC 5.0 with Service Pack 3 or later.
-# Get it from CPAN at http://www.cpan.org/authors/id/D/DO/DOUGL/
-# and follow the directions in the package to install.
-#
-# Not recommended if you have VC 6.x and you're not running Windows 9x.
-#
-#USE_PERLCRT = define
-
-#
-# uncomment to enable linking with setargv.obj under the Visual C
-# compiler. Setting this options enables perl to expand wildcards in
-# arguments, but it may be harder to use alternate methods like
-# File::DosGlob that are more powerful. This option is supported only with
-# Visual C.
-#
-#USE_SETARGV = define
-
-#
-# if you have the source for des_fcrypt(), uncomment this and make sure the
-# file exists (see README.win32). File should be located in the same
-# directory as this file.
-#
-#CRYPT_SRC = fcrypt.c
-
-#
-# if you didn't set CRYPT_SRC and if you have des_fcrypt() available in a
-# library, uncomment this, and make sure the library exists (see README.win32)
-# Specify the full pathname of the library.
-#
-#CRYPT_LIB = fcrypt.lib
-
-#
-# set this if you wish to use perl's malloc
-# WARNING: Turning this on/off WILL break binary compatibility with extensions
-# you may have compiled with/without it. Be prepared to recompile all
-# extensions if you change the default. Currently, this cannot be enabled
-# if you ask for USE_IMP_SYS above.
-#
-#PERL_MALLOC = define
-
-#
-# set the install locations of the compiler include/libraries
-# Running VCVARS32.BAT is *required* when using Visual C.
-# Some versions of Visual C don't define MSVCDIR in the environment,
-# so you may have to set CCHOME explicitly (spaces in the path name should
-# not be quoted)
-#
-#CCHOME = f:\msvc20
-CCHOME = $(MSVCDIR)
-CCINCDIR = $(CCHOME)\include
-CCLIBDIR = $(CCHOME)\lib
-
-#
-# Additional compiler flags can be specified here.
-#
-
-#
-# This should normally be disabled. Adding -DPERL_POLLUTE enables support
-# for old symbols by default, at the expense of extreme pollution. You most
-# probably just want to build modules that won't compile with
-# perl Makefile.PL POLLUTE=1
-# instead of enabling this. Please report such modules to the respective
-# authors.
-#
-#BUILDOPT = $(BUILDOPT) -DPERL_POLLUTE
-
-#
-# This should normally be disabled. Enabling it will disable the File::Glob
-# implementation of CORE::glob.
-#
-#BUILDOPT = $(BUILDOPT) -DPERL_EXTERNAL_GLOB
-
-#
-# This should normally be disabled. Enabling it causes perl to read scripts
-# in text mode (which is the 5.005 behavior) and will break ByteLoader.
-#BUILDOPT = $(BUILDOPT) -DPERL_TEXTMODE_SCRIPTS
-
-#
-# specify semicolon-separated list of extra directories that modules will
-# look for libraries (spaces in path names need not be quoted)
-#
-EXTRALIBDIRS =
-
-#
-# set this to your email address (perl will guess a value from
-# from your loginname and your hostname, which may not be right)
-#
-#EMAIL =
-
-##
-## Build configuration ends.
-##
-
-##################### CHANGE THESE ONLY IF YOU MUST #####################
-
-!IF "$(CRYPT_SRC)$(CRYPT_LIB)" == ""
-D_CRYPT = undef
-!ELSE
-D_CRYPT = define
-CRYPT_FLAG = -DHAVE_DES_FCRYPT
-!ENDIF
-
-!IF "$(PERL_MALLOC)" == ""
-PERL_MALLOC = undef
-!ENDIF
-
-!IF "$(USE_5005THREADS)" == ""
-USE_5005THREADS = undef
-!ENDIF
-
-!IF "$(USE_5005THREADS)" == "define"
-USE_ITHREADS = undef
-!ENDIF
-
-!IF "$(USE_IMP_SYS)" == "define"
-PERL_MALLOC = undef
-!ENDIF
-
-!IF "$(USE_MULTI)" == ""
-USE_MULTI = undef
-!ENDIF
-
-!IF "$(USE_ITHREADS)" == ""
-USE_ITHREADS = undef
-!ENDIF
-
-!IF "$(USE_IMP_SYS)" == ""
-USE_IMP_SYS = undef
-!ENDIF
-
-!IF "$(USE_PERLIO)" == ""
-USE_PERLIO = undef
-!ENDIF
-
-!IF "$(USE_PERLCRT)" == ""
-USE_PERLCRT = undef
-!ENDIF
-
-!IF "$(USE_IMP_SYS)$(USE_MULTI)$(USE_5005THREADS)" == "defineundefundef"
-USE_MULTI = define
-!ENDIF
-
-!IF "$(USE_ITHREADS)$(USE_MULTI)" == "defineundef"
-USE_MULTI = define
-USE_5005THREADS = undef
-!ENDIF
-
-!IF "$(USE_MULTI)$(USE_5005THREADS)" != "undefundef"
-BUILDOPT = $(BUILDOPT) -DPERL_IMPLICIT_CONTEXT
-!ENDIF
-
-!IF "$(USE_IMP_SYS)" != "undef"
-BUILDOPT = $(BUILDOPT) -DPERL_IMPLICIT_SYS
-!ENDIF
-
-!IF "$(PROCESSOR_ARCHITECTURE)" == ""
-PROCESSOR_ARCHITECTURE = x86
-!ENDIF
-
-!IF "$(USE_5005THREADS)" == "define"
-ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-thread
-!ELSE
-!IF "$(USE_MULTI)" == "define"
-ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-multi
-!ELSE
-!IF "$(USE_PERLIO)" == "define"
-ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-perlio
-!ELSE
-ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)
-!ENDIF
-!ENDIF
-!ENDIF
-
-!IF "$(USE_PERLIO)" == "define"
-BUILDOPT = $(BUILDOPT) -DUSE_PERLIO
-!ENDIF
-
-!IF "$(USE_ITHREADS)" == "define"
-ARCHNAME = $(ARCHNAME)-thread
-!ENDIF
-
-# Visual Studio 98 specific
-!IF "$(CCTYPE)" == "MSVC60"
-
-# VC 6.0 can load the socket dll on demand. Makes the test suite
-# run in about 10% less time.
-DELAYLOAD = -DELAYLOAD:wsock32.dll -DELAYLOAD:shell32.dll delayimp.lib
-!ENDIF
-
-ARCHDIR = ..\lib\$(ARCHNAME)
-COREDIR = ..\lib\CORE
-AUTODIR = ..\lib\auto
-LIBDIR = ..\lib
-EXTDIR = ..\ext
-PODDIR = ..\pod
-EXTUTILSDIR = $(LIBDIR)\ExtUtils
-
-#
-INST_SCRIPT = $(INST_TOP)$(INST_VER)\bin
-INST_BIN = $(INST_SCRIPT)$(INST_ARCH)
-INST_LIB = $(INST_TOP)$(INST_VER)\lib
-INST_ARCHLIB = $(INST_LIB)$(INST_ARCH)
-INST_COREDIR = $(INST_ARCHLIB)\CORE
-INST_POD = $(INST_LIB)\pod
-INST_HTML = $(INST_TOP)$(INST_VER)\html
-
-#
-# Programs to compile, build .lib files and link
-#
-
-CC = cl
-LINK32 = link
-LIB32 = $(LINK32) -lib
-RSC = rc
-
-#
-# Options
-#
-
-INCLUDES = -I$(COREDIR) -I.\include -I. -I..
-#PCHFLAGS = -Fpc:\temp\vcmoduls.pch -YX
-DEFINES = -DWIN32 -D_CONSOLE -DNO_STRICT $(CRYPT_FLAG)
-LOCDEFS = -DPERLDLL -DPERL_CORE
-SUBSYS = console
-CXX_FLAG = -TP -GX
-
-!IF "$(USE_PERLCRT)" != "define"
-LIBC = msvcrt.lib
-!ELSE
-LIBC = PerlCRT.lib
-!ENDIF
-
-PERLEXE_RES =
-PERLDLL_RES =
-
-!IF "$(CFG)" == "Debug"
-! IF "$(CCTYPE)" == "MSVC20"
-OPTIMIZE = -Od -MD -Z7 -DDEBUGGING
-! ELSE
-OPTIMIZE = -Od -MD -Zi -DDEBUGGING
-! ENDIF
-LINK_DBG = -debug -pdb:none
-!ELSE
-# -O1 yields smaller code, which turns out to be faster than -O2
-#OPTIMIZE = -O2 -MD -DNDEBUG
-OPTIMIZE = -O1 -MD -DNDEBUG
-LINK_DBG = -release
-!ENDIF
-
-!IF "$(USE_PERLCRT)" != "define"
-BUILDOPT = $(BUILDOPT) -DPERL_MSVCRT_READFIX
-!ENDIF
-
-LIBBASEFILES = $(CRYPT_LIB) \
- oldnames.lib kernel32.lib user32.lib gdi32.lib winspool.lib \
- comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib \
- netapi32.lib uuid.lib wsock32.lib mpr.lib winmm.lib \
- version.lib odbc32.lib odbccp32.lib
-
-# we add LIBC here, since we may be using PerlCRT.dll
-LIBFILES = $(LIBBASEFILES) $(LIBC)
-
-CFLAGS = -nologo -Gf -W3 $(INCLUDES) $(DEFINES) $(LOCDEFS) \
- $(PCHFLAGS) $(OPTIMIZE)
-LINK_FLAGS = -nologo -nodefaultlib $(LINK_DBG) \
- -libpath:"$(INST_COREDIR)" \
- -machine:$(PROCESSOR_ARCHITECTURE)
-OBJOUT_FLAG = -Fo
-EXEOUT_FLAG = -Fe
-
-CFLAGS_O = $(CFLAGS) $(BUILDOPT)
-
-#################### do not edit below this line #######################
-############# NO USER-SERVICEABLE PARTS BEYOND THIS POINT ##############
-
-o = .obj
-
-#
-# Rules
-#
-
-.SUFFIXES : .c $(o) .dll .lib .exe .rc .res
-
-.c$(o):
- $(CC) -c -I$(<D) $(CFLAGS_O) $(OBJOUT_FLAG)$@ $<
-
-.y.c:
- $(NOOP)
-
-$(o).dll:
- $(LINK32) -dll -subsystem:windows -implib:$(*B).lib -def:$(*B).def \
- -out:$@ $(LINK_FLAGS) $(LIBFILES) $< $(LIBPERL)
-
-.rc.res:
- $(RSC) -i.. $<
-
-#
-# various targets
-
-# makedef.pl must be updated if this changes, and this should normally
-# only change when there is an incompatible revision of the public API.
-# XXX so why did we change it from perl56 to perl57?
-PERLIMPLIB = ..\perl57.lib
-PERLDLL = ..\perl57.dll
-
-MINIPERL = ..\miniperl.exe
-MINIDIR = .\mini
-PERLEXE = ..\perl.exe
-WPERLEXE = ..\wperl.exe
-GLOBEXE = ..\perlglob.exe
-CONFIGPM = ..\lib\Config.pm
-MINIMOD = ..\lib\ExtUtils\Miniperl.pm
-X2P = ..\x2p\a2p.exe
-
-# Nominate a target which causes extensions to be re-built
-# This used to be $(PERLEXE), but at worst it is the .dll that they depend
-# on and really only the interface - i.e. the .def file used to export symbols
-# from the .dll
-PERLDEP = perldll.def
-
-PL2BAT = bin\pl2bat.pl
-GLOBBAT = bin\perlglob.bat
-
-UTILS = \
- ..\utils\h2ph \
- ..\utils\splain \
- ..\utils\dprofpp \
- ..\utils\perlbug \
- ..\utils\pl2pm \
- ..\utils\c2ph \
- ..\utils\h2xs \
- ..\utils\perldoc \
- ..\utils\perlcc \
- ..\utils\perlivp \
- ..\utils\libnetcfg \
- ..\pod\checkpods \
- ..\pod\pod2html \
- ..\pod\pod2latex \
- ..\pod\pod2man \
- ..\pod\pod2text \
- ..\pod\pod2usage \
- ..\pod\podchecker \
- ..\pod\podselect \
- ..\x2p\find2perl \
- ..\x2p\s2p \
- ..\lib\ExtUtils\xsubpp \
- bin\exetype.pl \
- bin\runperl.pl \
- bin\pl2bat.pl \
- bin\perlglob.pl \
- bin\search.pl
-
-MAKE = nmake -nologo
-MAKE_BARE = nmake
-
-CFGSH_TMPL = config.vc
-CFGH_TMPL = config_H.vc
-
-XCOPY = xcopy /f /r /i /d
-RCOPY = xcopy /f /r /i /e /d
-NOOP = @echo
-NULL =
-
-DEL = del
-
-#
-# filenames given to xsubpp must have forward slashes (since it puts
-# full pathnames in #line strings)
-XSUBPP = ..\$(MINIPERL) -I..\..\lib ..\$(EXTUTILSDIR)\xsubpp \
- -C++ -prototypes
-
-MICROCORE_SRC = \
- ..\av.c \
- ..\deb.c \
- ..\doio.c \
- ..\doop.c \
- ..\dump.c \
- ..\globals.c \
- ..\gv.c \
- ..\hv.c \
- ..\locale.c \
- ..\mg.c \
- ..\numeric.c \
- ..\op.c \
- ..\perl.c \
- ..\perlapi.c \
- ..\perly.c \
- ..\pp.c \
- ..\pp_ctl.c \
- ..\pp_hot.c \
- ..\pp_pack.c \
- ..\pp_sort.c \
- ..\pp_sys.c \
- ..\regcomp.c \
- ..\regexec.c \
- ..\run.c \
- ..\scope.c \
- ..\sv.c \
- ..\taint.c \
- ..\toke.c \
- ..\universal.c \
- ..\utf8.c \
- ..\util.c \
- ..\xsutils.c
-
-EXTRACORE_SRC = $(EXTRACORE_SRC) perllib.c
-
-!IF "$(PERL_MALLOC)" == "define"
-EXTRACORE_SRC = $(EXTRACORE_SRC) ..\malloc.c
-!ENDIF
-
-EXTRACORE_SRC = $(EXTRACORE_SRC) ..\perlio.c
-
-WIN32_SRC = \
- .\win32.c \
- .\win32sck.c \
- .\win32thread.c
-
-!IF "$(USE_PERLIO)" == "define"
-WIN32_SRC = $(WIN32_SRC) .\win32io.c
-!ENDIF
-
-!IF "$(CRYPT_SRC)" != ""
-WIN32_SRC = $(WIN32_SRC) .\$(CRYPT_SRC)
-!ENDIF
-
-DLL_SRC = $(DYNALOADER).c
-
-X2P_SRC = \
- ..\x2p\a2p.c \
- ..\x2p\hash.c \
- ..\x2p\str.c \
- ..\x2p\util.c \
- ..\x2p\walk.c
-
-CORE_NOCFG_H = \
- ..\av.h \
- ..\cop.h \
- ..\cv.h \
- ..\dosish.h \
- ..\embed.h \
- ..\form.h \
- ..\gv.h \
- ..\handy.h \
- ..\hv.h \
- ..\iperlsys.h \
- ..\mg.h \
- ..\nostdio.h \
- ..\op.h \
- ..\opcode.h \
- ..\perl.h \
- ..\perlapi.h \
- ..\perlsdio.h \
- ..\perlsfio.h \
- ..\perly.h \
- ..\pp.h \
- ..\proto.h \
- ..\regexp.h \
- ..\scope.h \
- ..\sv.h \
- ..\thread.h \
- ..\unixish.h \
- ..\utf8.h \
- ..\util.h \
- ..\warnings.h \
- ..\XSUB.h \
- ..\EXTERN.h \
- ..\perlvars.h \
- ..\intrpvar.h \
- ..\thrdvar.h \
- .\include\dirent.h \
- .\include\netdb.h \
- .\include\sys\socket.h \
- .\win32.h
-
-CORE_H = $(CORE_NOCFG_H) .\config.h
-
-MICROCORE_OBJ = $(MICROCORE_SRC:.c=.obj)
-CORE_OBJ = $(MICROCORE_OBJ) $(EXTRACORE_SRC:.c=.obj)
-WIN32_OBJ = $(WIN32_SRC:.c=.obj)
-MINICORE_OBJ = $(MICROCORE_OBJ:..\=.\mini\) \
- $(MINIDIR)\miniperlmain$(o) \
- $(MINIDIR)\perlio$(o)
-MINIWIN32_OBJ = $(WIN32_OBJ:.\=.\mini\)
-MINI_OBJ = $(MINICORE_OBJ) $(MINIWIN32_OBJ)
-DLL_OBJ = $(DLL_SRC:.c=.obj)
-X2P_OBJ = $(X2P_SRC:.c=.obj)
-
-PERLDLL_OBJ = $(CORE_OBJ)
-PERLEXE_OBJ = perlmain$(o)
-
-PERLDLL_OBJ = $(PERLDLL_OBJ) $(WIN32_OBJ) $(DLL_OBJ)
-#PERLEXE_OBJ = $(PERLEXE_OBJ) $(WIN32_OBJ) $(DLL_OBJ)
-
-!IF "$(USE_SETARGV)" != ""
-SETARGV_OBJ = setargv$(o)
-!ENDIF
-
-DYNALOADER = $(EXTDIR)\DynaLoader\DynaLoader
-SOCKET = $(EXTDIR)\Socket\Socket
-FCNTL = $(EXTDIR)\Fcntl\Fcntl
-OPCODE = $(EXTDIR)\Opcode\Opcode
-SDBM_FILE = $(EXTDIR)\SDBM_File\SDBM_File
-IO = $(EXTDIR)\IO\IO
-POSIX = $(EXTDIR)\POSIX\POSIX
-ATTRS = $(EXTDIR)\attrs\attrs
-THREAD = $(EXTDIR)\Thread\Thread
-B = $(EXTDIR)\B\B
-RE = $(EXTDIR)\re\re
-DUMPER = $(EXTDIR)\Data\Dumper\Dumper
-ERRNO = $(EXTDIR)\Errno\Errno
-PEEK = $(EXTDIR)\Devel\Peek\Peek
-BYTELOADER = $(EXTDIR)\ByteLoader\ByteLoader
-DPROF = $(EXTDIR)\Devel\DProf\DProf
-GLOB = $(EXTDIR)\File\Glob\Glob
-HOSTNAME = $(EXTDIR)\Sys\Hostname\Hostname
-STORABLE = $(EXTDIR)\Storable\Storable
-FILTER = $(EXTDIR)\Filter\Util\Call\Call
-ENCODE = $(EXTDIR)\Encode\Encode
-MD5 = $(EXTDIR)\Digest\MD5\MD5
-PERLIOSCALAR = $(EXTDIR)\PerlIO\Scalar\Scalar
-MIMEBASE64 = $(EXTDIR)\MIME\Base64\Base64
-TIMEHIRES = $(EXTDIR)\Time\HiRes\HiRes
-CWD = $(EXTDIR)\Cwd\Cwd
-LISTUTIL = $(EXTDIR)\List\Util\Util
-PERLIOVIA = $(EXTDIR)\PerlIO\Via\Via
-XSTYPEMAP = $(EXTDIR)\XS\Typemap\Typemap
-UNICODENORMALIZE = $(EXTDIR)\Unicode\Normalize\Normalize
-
-SOCKET_DLL = $(AUTODIR)\Socket\Socket.dll
-FCNTL_DLL = $(AUTODIR)\Fcntl\Fcntl.dll
-OPCODE_DLL = $(AUTODIR)\Opcode\Opcode.dll
-SDBM_FILE_DLL = $(AUTODIR)\SDBM_File\SDBM_File.dll
-IO_DLL = $(AUTODIR)\IO\IO.dll
-POSIX_DLL = $(AUTODIR)\POSIX\POSIX.dll
-ATTRS_DLL = $(AUTODIR)\attrs\attrs.dll
-THREAD_DLL = $(AUTODIR)\Thread\Thread.dll
-B_DLL = $(AUTODIR)\B\B.dll
-DUMPER_DLL = $(AUTODIR)\Data\Dumper\Dumper.dll
-PEEK_DLL = $(AUTODIR)\Devel\Peek\Peek.dll
-RE_DLL = $(AUTODIR)\re\re.dll
-BYTELOADER_DLL = $(AUTODIR)\ByteLoader\ByteLoader.dll
-DPROF_DLL = $(AUTODIR)\Devel\DProf\DProf.dll
-GLOB_DLL = $(AUTODIR)\File\Glob\Glob.dll
-HOSTNAME_DLL = $(AUTODIR)\Sys\Hostname\Hostname.dll
-STORABLE_DLL = $(AUTODIR)\Storable\Storable.dll
-FILTER_DLL = $(AUTODIR)\Filter\Util\Call\Call.dll
-ENCODE_DLL = $(AUTODIR)\Encode\Encode.dll
-MD5_DLL = $(AUTODIR)\Digest\MD5\MD5.dll
-PERLIOSCALAR_DLL = $(AUTODIR)\PerlIO\Scalar\Scalar.dll
-MIMEBASE64_DLL = $(AUTODIR)\MIME\Base64\Base64.dll
-TIMEHIRES_DLL = $(AUTODIR)\Time\HiRes\HiRes.dll
-CWD_DLL = $(AUTODIR)\Cwd\Cwd.dll
-LISTUTIL_DLL = $(AUTODIR)\List\Util\Util.dll
-PERLIOVIA_DLL = $(AUTODIR)\PerlIO\Via\Via.dll
-XSTYPEMAP_DLL = $(AUTODIR)\XS\Typemap\Typemap.dll
-UNICODENORMALIZE_DLL = $(AUTODIR)\Unicode\Normalize\Normalize.dll
-
-EXTENSION_C = \
- $(SOCKET).c \
- $(FCNTL).c \
- $(OPCODE).c \
- $(SDBM_FILE).c \
- $(IO).c \
- $(POSIX).c \
- $(ATTRS).c \
- $(THREAD).c \
- $(RE).c \
- $(DUMPER).c \
- $(PEEK).c \
- $(B).c \
- $(BYTELOADER).c \
- $(DPROF).c \
- $(GLOB).c \
- $(HOSTNAME).c \
- $(STORABLE).c \
- $(FILTER).c \
- $(ENCODE).c \
- $(MD5).c \
- $(PERLIOSCALAR).c \
- $(MIMEBASE64).c \
- $(TIMEHIRES).c \
- $(CWD).c \
- $(LISTUTIL).c \
- $(PERLIOVIA).c \
- $(XSTYPEMAP).c \
- $(UNICODENORMALIZE).c
-
-EXTENSION_DLL = \
- $(SOCKET_DLL) \
- $(FCNTL_DLL) \
- $(OPCODE_DLL) \
- $(SDBM_FILE_DLL)\
- $(IO_DLL) \
- $(POSIX_DLL) \
- $(ATTRS_DLL) \
- $(DUMPER_DLL) \
- $(PEEK_DLL) \
- $(B_DLL) \
- $(RE_DLL) \
- $(THREAD_DLL) \
- $(BYTELOADER_DLL) \
- $(DPROF_DLL) \
- $(GLOB_DLL) \
- $(HOSTNAME_DLL) \
- $(STORABLE_DLL) \
- $(FILTER_DLL) \
- $(ENCODE_DLL) \
- $(MD5_DLL) \
- $(PERLIOSCALAR_DLL) \
- $(MIMEBASE64_DLL) \
- $(TIMEHIRES_DLL) \
- $(CWD_DLL) \
- $(LISTUTIL_DLL) \
- $(PERLIOVIA_DLL) \
- $(XSTYPEMAP_DLL) \
- $(UNICODENORMALIZE_DLL)
-
-POD2HTML = $(PODDIR)\pod2html
-POD2MAN = $(PODDIR)\pod2man
-POD2LATEX = $(PODDIR)\pod2latex
-POD2TEXT = $(PODDIR)\pod2text
-
-CFG_VARS = \
- "INST_DRV=$(INST_DRV)" \
- "INST_TOP=$(INST_TOP)" \
- "INST_VER=$(INST_VER)" \
- "INST_ARCH=$(INST_ARCH)" \
- "archname=$(ARCHNAME)" \
- "cc=$(CC)" \
- "ld=$(LINK32)" \
- "ccflags=-nologo -Gf -W3 $(OPTIMIZE:"=\") $(DEFINES) $(BUILDOPT)" \
- "cf_email=$(EMAIL)" \
- "d_crypt=$(D_CRYPT)" \
- "d_mymalloc=$(PERL_MALLOC)" \
- "libs=$(LIBFILES)" \
- "incpath=$(CCINCDIR:"=\")" \
- "libperl=$(PERLIMPLIB:..\=)" \
- "libpth=$(CCLIBDIR:"=\");$(EXTRALIBDIRS:"=\")" \
- "libc=$(LIBC)" \
- "make=$(MAKE_BARE)" \
- "use5005threads=$(USE_5005THREADS)" \
- "useithreads=$(USE_ITHREADS)" \
- "usethreads=$(USE_5005THREADS)" \
- "usemultiplicity=$(USE_MULTI)" \
- "useperlio=$(USE_PERLIO)" \
- "LINK_FLAGS=$(LINK_FLAGS:"=\")" \
- "optimize=$(OPTIMIZE:"=\")"
-
-#
-# Top targets
-#
-
-all : .\config.h $(GLOBEXE) $(MINIMOD) $(CONFIGPM) $(PERLEXE) \
- $(X2P) Extensions
- @echo Everything is up to date. '$(MAKE_BARE) test' to run test suite.
-
-$(DYNALOADER)$(o) : $(DYNALOADER).c $(CORE_H) $(EXTDIR)\DynaLoader\dlutils.c
-
-#------------------------------------------------------------
-
-$(GLOBEXE) : perlglob$(o)
- $(LINK32) $(LINK_FLAGS) $(LIBFILES) -out:$@ -subsystem:$(SUBSYS) \
- perlglob$(o) setargv$(o)
-
-perlglob$(o) : perlglob.c
-
-config.w32 : $(CFGSH_TMPL)
- copy $(CFGSH_TMPL) config.w32
-
-.\config.h : $(CFGH_TMPL)
- -del /f config.h
- copy $(CFGH_TMPL) config.h
-
-..\config.sh : config.w32 $(MINIPERL) config_sh.PL
- $(MINIPERL) -I..\lib config_sh.PL $(CFG_VARS) config.w32 > ..\config.sh
-
-# this target is for when changes to the main config.sh happen
-# edit config.{b,v,g}c and make this target once for each supported
-# compiler (e.g. `nmake CCTYPE=BORLAND regen_config_h`)
-regen_config_h:
- perl config_sh.PL $(CFG_VARS) $(CFGSH_TMPL) > ..\config.sh
- cd ..
- -del /f perl.exe
- perl configpm
- cd win32
- -del /f $(CFGH_TMPL)
- -mkdir $(COREDIR)
- -perl -I..\lib config_h.PL "INST_VER=$(INST_VER)"
- rename config.h $(CFGH_TMPL)
-
-$(CONFIGPM) : $(MINIPERL) ..\config.sh config_h.PL ..\minimod.pl
- cd ..
- miniperl configpm
- cd win32
- if exist lib\* $(RCOPY) lib\*.* ..\lib\$(NULL)
- $(XCOPY) ..\*.h $(COREDIR)\*.*
- $(XCOPY) *.h $(COREDIR)\*.*
- $(XCOPY) ..\ext\re\re.pm $(LIBDIR)\*.*
- $(RCOPY) include $(COREDIR)\*.*
- -$(MINIPERL) -I..\lib config_h.PL "INST_VER=$(INST_VER)"
- if errorlevel 1 $(MAKE) /$(MAKEFLAGS) $(CONFIGPM)
-
-$(MINIPERL) : $(MINIDIR) $(MINI_OBJ)
- $(LINK32) -subsystem:console -out:$@ @<<
- $(LINK_FLAGS) $(LIBFILES) $(MINI_OBJ)
-<<
-
-$(MINIDIR) :
- if not exist "$(MINIDIR)" mkdir "$(MINIDIR)"
-
-$(MINICORE_OBJ) : $(CORE_NOCFG_H)
- $(CC) -c $(CFLAGS) -DPERL_EXTERNAL_GLOB $(OBJOUT_FLAG)$@ ..\$(*F).c
-
-$(MINIWIN32_OBJ) : $(CORE_NOCFG_H)
- $(CC) -c $(CFLAGS) $(OBJOUT_FLAG)$@ $(*F).c
-
-# -DPERL_IMPLICIT_SYS needs C++ for perllib.c
-# This is the only file that depends on perlhost.h, vmem.h, and vdir.h
-!IF "$(USE_IMP_SYS)" == "define"
-perllib$(o) : perllib.c .\perlhost.h .\vdir.h .\vmem.h
- $(CC) -c -I. $(CFLAGS_O) $(CXX_FLAG) $(OBJOUT_FLAG)$@ perllib.c
-!ENDIF
-
-# 1. we don't want to rebuild miniperl.exe when config.h changes
-# 2. we don't want to rebuild miniperl.exe with non-default config.h
-$(MINI_OBJ) : $(CORE_NOCFG_H)
-
-$(WIN32_OBJ) : $(CORE_H)
-$(CORE_OBJ) : $(CORE_H)
-$(DLL_OBJ) : $(CORE_H)
-$(X2P_OBJ) : $(CORE_H)
-
-perldll.def : $(MINIPERL) $(CONFIGPM) ..\global.sym ..\pp.sym ..\makedef.pl
- $(MINIPERL) -w ..\makedef.pl PLATFORM=win32 $(OPTIMIZE) $(DEFINES) $(BUILDOPT) \
- CCTYPE=$(CCTYPE) > perldll.def
-
-$(PERLDLL): perldll.def $(PERLDLL_OBJ) $(PERLDLL_RES)
- $(LINK32) -dll -def:perldll.def -base:0x28000000 -out:$@ @<<
- $(LINK_FLAGS) $(DELAYLOAD) $(LIBFILES) $(PERLDLL_OBJ) $(PERLDLL_RES)
-<<
- $(XCOPY) $(PERLIMPLIB) $(COREDIR)
-
-$(MINIMOD) : $(MINIPERL) ..\minimod.pl
- cd ..
- miniperl minimod.pl > lib\ExtUtils\Miniperl.pm
- cd win32
-
-..\x2p\a2p$(o) : ..\x2p\a2p.c
- $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\a2p.c
-
-..\x2p\hash$(o) : ..\x2p\hash.c
- $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\hash.c
-
-..\x2p\str$(o) : ..\x2p\str.c
- $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\str.c
-
-..\x2p\util$(o) : ..\x2p\util.c
- $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\util.c
-
-..\x2p\walk$(o) : ..\x2p\walk.c
- $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\walk.c
-
-$(X2P) : $(MINIPERL) $(X2P_OBJ)
- $(MINIPERL) ..\x2p\find2perl.PL
- $(MINIPERL) ..\x2p\s2p.PL
- $(LINK32) -subsystem:console -out:$@ @<<
- $(LINK_FLAGS) $(LIBFILES) $(X2P_OBJ)
-<<
-
-perlmain.c : runperl.c
- copy runperl.c perlmain.c
-
-perlmain$(o) : perlmain.c
- $(CC) $(CFLAGS_O) -UPERLDLL $(OBJOUT_FLAG)$@ -c perlmain.c
-
-$(PERLEXE): $(PERLDLL) $(CONFIGPM) $(PERLEXE_OBJ) $(PERLEXE_RES)
- $(LINK32) -subsystem:console -out:$@ -stack:0x1000000 $(LINK_FLAGS) \
- $(LIBFILES) $(PERLEXE_OBJ) $(SETARGV_OBJ) $(PERLIMPLIB) $(PERLEXE_RES)
- copy $(PERLEXE) $(WPERLEXE)
- $(MINIPERL) -I..\lib bin\exetype.pl $(WPERLEXE) WINDOWS
- copy splittree.pl ..
- $(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)
-
-$(DYNALOADER).c: $(MINIPERL) $(EXTDIR)\DynaLoader\dl_win32.xs $(CONFIGPM)
- if not exist $(AUTODIR) mkdir $(AUTODIR)
- cd $(EXTDIR)\$(*B)
- ..\$(MINIPERL) -I..\..\lib $(*B)_pm.PL
- ..\$(MINIPERL) -I..\..\lib XSLoader_pm.PL
- cd ..\..\win32
- $(XCOPY) $(EXTDIR)\$(*B)\$(*B).pm $(LIBDIR)\$(NULL)
- $(XCOPY) $(EXTDIR)\$(*B)\XSLoader.pm $(LIBDIR)\$(NULL)
- cd $(EXTDIR)\$(*B)
- $(XSUBPP) dl_win32.xs > $(*B).c
- cd ..\..\win32
-
-$(EXTDIR)\DynaLoader\dl_win32.xs: dl_win32.xs
- copy dl_win32.xs $(EXTDIR)\DynaLoader\dl_win32.xs
-
-#----------------------------------------------------------------------------------
-Extensions: buildext.pl $(PERLDEP) $(CONFIGPM)
- $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR)
-
-Extensions_clean:
- -if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) clean
-
-#----------------------------------------------------------------------------------
-
-doc: $(PERLEXE)
- $(PERLEXE) -I..\lib ..\installhtml --podroot=.. --htmldir=./html \
- --podpath=pod:lib:ext:utils --htmlroot="file://$(INST_HTML::=|)" \
- --libpod=perlfunc:perlguts:perlvar:perlrun:perlop --recurse
-
-utils: $(PERLEXE) $(X2P)
- cd ..\utils
- $(MAKE) PERL=$(MINIPERL)
- cd ..\pod
- copy ..\README.aix .\perlaix.pod
- copy ..\README.amiga .\perlamiga.pod
- copy ..\README.apollo .\perlapollo.pod
- copy ..\README.beos .\perlbeos.pod
- copy ..\README.bs2000 .\perlbs2000.pod
- copy ..\README.ce .\perlce.pod
- copy ..\README.cygwin .\perlcygwin.pod
- copy ..\README.dgux .\perldgux.pod
- copy ..\README.dos .\perldos.pod
- copy ..\README.epoc .\perlepoc.pod
- copy ..\README.hurd .\perlhurd.pod
- copy ..\README.hpux .\perlhpux.pod
- copy ..\README.machten .\perlmachten.pod
- copy ..\README.macos .\perlmacos.pod
- copy ..\README.mint .\perlmint.pod
- copy ..\README.mpeix .\perlmpeix.pod
- copy ..\README.netware .\perlnetware.pod
- copy ..\README.os2 .\perlos2.pod
- copy ..\README.os390 .\perlos390.pod
- copy ..\README.plan9 .\perlplan9.pod
- copy ..\README.qnx .\perlqnx.pod
- copy ..\README.solaris .\perlsolaris.pod
- copy ..\README.tru64 .\perltru64.pod
- copy ..\README.uts .\perluts.pod
- copy ..\README.vmesa .\perlvmesa.pod
- copy ..\vms\perlvms.pod .\perlvms.pod
- copy ..\README.vos .\perlvos.pod
- copy ..\README.win32 .\perlwin32.pod
- $(MAKE) -f ..\win32\pod.mak converters
- cd ..\lib
- $(PERLEXE) lib_pm.PL
- cd ..\win32
- $(PERLEXE) $(PL2BAT) $(UTILS)
-
-distclean: clean
- -del /f $(MINIPERL) $(PERLEXE) $(PERLDLL) $(GLOBEXE) \
- $(PERLIMPLIB) ..\miniperl.lib $(MINIMOD)
- -del /f *.def *.map
- -del /f $(EXTENSION_DLL)
- -del /f $(EXTENSION_C) $(DYNALOADER).c $(ERRNO).pm
- -del /f $(EXTDIR)\DynaLoader\dl_win32.xs
- -del /f $(LIBDIR)\.exists $(LIBDIR)\attrs.pm $(LIBDIR)\DynaLoader.pm
- -del /f $(LIBDIR)\XSLoader.pm
- -del /f $(LIBDIR)\Fcntl.pm $(LIBDIR)\IO.pm $(LIBDIR)\Opcode.pm
- -del /f $(LIBDIR)\ops.pm $(LIBDIR)\Safe.pm
- -del /f $(LIBDIR)\SDBM_File.pm $(LIBDIR)\Socket.pm $(LIBDIR)\POSIX.pm
- -del /f $(LIBDIR)\B.pm $(LIBDIR)\O.pm $(LIBDIR)\re.pm
- -del /f $(LIBDIR)\Data\Dumper.pm $(LIBDIR)\ByteLoader.pm
- -del /f $(LIBDIR)\Devel\Peek.pm $(LIBDIR)\Devel\DProf.pm
- -del /f $(LIBDIR)\File\Glob.pm
- -del /f $(LIBDIR)\Storable.pm
- -del /f $(LIBDIR)\Filter\Util\Call.pm
- -del /f $(LIBDIR)\Digest\MD5.pm
- -del /f $(LIBDIR)\PerlIO\Scalar.pm
- -del /f $(LIBDIR)\PerlIO\Via.pm
- -del /f $(LIBDIR)\MIME\Base64.pm
- -del /f $(LIBDIR)\MIME\QuotedPrint.pm
- -del /f $(LIBDIR)\List\Util.pm
- -del /f $(LIBDIR)\Scalar\Util.pm
- -del /f $(LIBDIR)\Time\HiRes.pm
- -del /f $(LIBDIR)\XS\Typemap.pm
- -del /f $(LIBDIR)\Unicode\Normalize.pm
- -if exist $(LIBDIR)\IO rmdir /s /q $(LIBDIR)\IO
- -rmdir /s $(LIBDIR)\IO
- -if exist $(LIBDIR)\Thread rmdir /s /q $(LIBDIR)\Thread
- -rmdir /s $(LIBDIR)\Thread
- -if exist $(LIBDIR)\B rmdir /s /q $(LIBDIR)\B
- -rmdir /s $(LIBDIR)\B
- -if exist $(LIBDIR)\Data rmdir /s /q $(LIBDIR)\Data
- -rmdir /s $(LIBDIR)\Data
- -if exist $(LIBDIR)\Filter\Util rmdir /s /q $(LIBDIR)\Filter\Util
- -if exist $(LIBDIR)\Digest rmdir /s /q $(LIBDIR)\Digest
- -rmdir /s $(LIBDIR)\Digest
- -if exist $(LIBDIR)\MIME rmdir /s /q $(LIBDIR)\MIME
- -rmdir /s $(LIBDIR)\MIME
- -if exist $(LIBDIR)\List rmdir /s /q $(LIBDIR)\List
- -rmdir /s $(LIBDIR)\List
- -if exist $(LIBDIR)\Scalar rmdir /s /q $(LIBDIR)\Scalar
- -rmdir /s $(LIBDIR)\Scalar
- -if exist $(LIBDIR)\XS rmdir /s /q $(LIBDIR)\XS
- -rmdir /s $(LIBDIR)\XS
- cd $(PODDIR)
- -del /f *.html *.bat checkpods \
- perlaix.pod perlamiga.pod perlapollo.pod perlbeos.pod \
- perlbs2000.pod perlce.pod perlcygwin.pod perldgux.pod \
- perldos.pod perlepoc.pod perlhurd.pod \
- perlhpux.pod perlmachten.pod \
- perlmacos.pod perlmint.pod perlmpeix.pod perlnetware.pod \
- perlos2.pod perlos390.pod perlplan9.pod perlqnx.pod \
- perlsolaris.pod perltru64.pod perluts.pod \
- perlvmesa.pod perlvms.pod perlvos.pod \
- perlwin32.pod pod2html pod2latex pod2man pod2text pod2usage \
- podchecker podselect
- cd ..\utils
- -del /f h2ph splain perlbug pl2pm c2ph h2xs perldoc perlivp dprofpp
- -del /f *.bat
- cd ..\win32
- cd ..\x2p
- -del /f find2perl s2p
- -del /f *.bat
- cd ..\win32
- -del /f ..\config.sh ..\splittree.pl perlmain.c dlutils.c config.h.new
- -del /f $(CONFIGPM)
- -del /f bin\*.bat
- cd $(EXTDIR)
- -del /s *.lib *.def *.map *.pdb *.bs Makefile *$(o) pm_to_blib
- cd ..\win32
- -if exist $(AUTODIR) rmdir /s /q $(AUTODIR)
- -rmdir /s $(AUTODIR)
- -if exist $(COREDIR) rmdir /s /q $(COREDIR)
- -rmdir /s $(COREDIR)
-
-install : all installbare installhtml
-
-installbare : utils
- $(PERLEXE) ..\installperl
- if exist $(WPERLEXE) $(XCOPY) $(WPERLEXE) $(INST_BIN)\*.*
- $(XCOPY) $(GLOBEXE) $(INST_BIN)\*.*
- $(XCOPY) bin\*.bat $(INST_SCRIPT)\*.*
-
-installhtml : doc
- $(RCOPY) html\*.* $(INST_HTML)\*.*
-
-inst_lib : $(CONFIGPM)
- copy splittree.pl ..
- $(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)
- $(RCOPY) ..\lib $(INST_LIB)\*.*
-
-minitest : $(MINIPERL) $(GLOBEXE) $(CONFIGPM) utils
- $(XCOPY) $(MINIPERL) ..\t\perl.exe
- $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
- attrib -r ..\t\*.*
- copy test ..\t
- cd ..\t
- $(MINIPERL) -I..\lib test base/*.t comp/*.t cmd/*.t io/*.t op/*.t pragma/*.t
- cd ..\win32
-
-test-prep : all utils
- $(XCOPY) $(PERLEXE) ..\t\$(NULL)
- $(XCOPY) $(PERLDLL) ..\t\$(NULL)
- $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
-
-test : test-prep
- cd ..\t
- $(PERLEXE) -I..\lib harness
- cd ..\win32
-
-test-notty : test-prep
- set PERL_SKIP_TTY_TEST=1
- cd ..\t
- $(PERLEXE) -I..\lib harness
- cd ..\win32
-
-test-wide : test-prep
- set HARNESS_PERL_SWITCHES=-C
- cd ..\t
- $(PERLEXE) -I..\lib harness
- cd ..\win32
-
-test-wide-notty : test-prep
- set PERL_SKIP_TTY_TEST=1
- set HARNESS_PERL_SWITCHES=-C
- cd ..\t
- $(PERLEXE) -I..\lib harness
- cd ..\win32
-
-clean : Extensions_clean
- -@$(DEL) miniperlmain$(o)
- -@$(DEL) $(MINIPERL)
- -@$(DEL) perlglob$(o)
- -@$(DEL) perlmain$(o)
- -@$(DEL) config.w32
- -@$(DEL) config.h
- -@$(DEL) $(GLOBEXE)
- -@$(DEL) $(PERLEXE)
- -@$(DEL) $(WPERLEXE)
- -@$(DEL) $(PERLDLL)
- -@$(DEL) $(CORE_OBJ)
- -if exist $(MINIDIR) rmdir /s /q $(MINIDIR)
- -rmdir /s $(MINIDIR)
- -@$(DEL) $(WIN32_OBJ)
- -@$(DEL) $(DLL_OBJ)
- -@$(DEL) $(X2P_OBJ)
- -@$(DEL) ..\*$(o) ..\*.lib ..\*.exp *$(o) *.lib *.exp *.res
- -@$(DEL) ..\t\*.exe ..\t\*.dll ..\t\*.bat
- -@$(DEL) ..\x2p\*.exe ..\x2p\*.bat
- -@$(DEL) *.ilk
- -@$(DEL) *.pdb
-
-# Handy way to run perlbug -ok without having to install and run the
-# installed perlbug. We don't re-run the tests here - we trust the user.
-# Please *don't* use this unless all tests pass.
-# If you want to report test failures, use "nmake nok" instead.
-ok: utils
- $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)"
-
-okfile: utils
- $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)" -F perl.ok
-
-nok: utils
- $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)"
-
-nokfile: utils
- $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)" -F perl.nok
+#\r
+# Makefile to build perl on Windows NT using Microsoft NMAKE.\r
+# Supported compilers:\r
+# Visual C++ 5.x (possibly other versions)\r
+#\r
+# This is set up to build a perl.exe that runs off a shared library\r
+# (perl57.dll). Also makes individual DLLs for the XS extensions.\r
+#\r
+\r
+##\r
+## Make sure you read README.win32 *before* you mess with anything here!\r
+##\r
+\r
+##\r
+## Build configuration. Edit the values below to suit your needs.\r
+##\r
+\r
+#\r
+# Set these to wherever you want "nmake install" to put your\r
+# newly built perl.\r
+#\r
+INST_DRV = c:\r
+INST_TOP = $(INST_DRV)\perl\r
+\r
+#\r
+# Comment this out if you DON'T want your perl installation to be versioned.\r
+# This means that the new installation will overwrite any files from the\r
+# old installation at the same INST_TOP location. Leaving it enabled is\r
+# the safest route, as perl adds the extra version directory to all the\r
+# locations it installs files to. If you disable it, an alternative\r
+# versioned installation can be obtained by setting INST_TOP above to a\r
+# path that includes an arbitrary version string.\r
+#\r
+#INST_VER = \5.7.2\r
+\r
+#\r
+# Comment this out if you DON'T want your perl installation to have\r
+# architecture specific components. This means that architecture-\r
+# specific files will be installed along with the architecture-neutral\r
+# files. Leaving it enabled is safer and more flexible, in case you\r
+# want to build multiple flavors of perl and install them together in\r
+# the same location. Commenting it out gives you a simpler\r
+# installation that is easier to understand for beginners.\r
+#\r
+#INST_ARCH = \$(ARCHNAME)\r
+\r
+#\r
+# uncomment to enable multiple interpreters. This is need for fork()\r
+# emulation.\r
+#\r
+USE_MULTI = define\r
+\r
+#\r
+# Beginnings of interpreter cloning/threads; still very incomplete.\r
+# This should be enabled to get the fork() emulation. This needs\r
+# USE_MULTI as well.\r
+#\r
+USE_ITHREADS = define\r
+\r
+#\r
+# uncomment to enable the implicit "host" layer for all system calls\r
+# made by perl. This needs USE_MULTI above. This is also needed to\r
+# get fork().\r
+#\r
+USE_IMP_SYS = define\r
+\r
+#\r
+# uncomment to enable the experimental PerlIO I/O subsystem.\r
+USE_PERLIO = define\r
+\r
+#\r
+# WARNING! This option is deprecated and will eventually go away (enable\r
+# USE_ITHREADS instead).\r
+#\r
+# uncomment to enable threads-capabilities. This is incompatible with\r
+# USE_ITHREADS, and is only here for people who may have come to rely\r
+# on the experimental Thread support that was in 5.005.\r
+#\r
+#USE_5005THREADS = define\r
+\r
+#\r
+# uncomment one of the following lines if you are using either\r
+# Visual C++ 2.x or Visual C++ 6.x (aka Visual Studio 98)\r
+#\r
+#CCTYPE = MSVC20\r
+#CCTYPE = MSVC60\r
+\r
+#\r
+# uncomment next line if you want debug version of perl (big,slow)\r
+#\r
+#CFG = Debug\r
+\r
+#\r
+# uncomment to enable use of PerlCRT.DLL when using the Visual C compiler.\r
+# It has patches that fix known bugs in older versions of MSVCRT.DLL.\r
+# This currently requires VC 5.0 with Service Pack 3 or later.\r
+# Get it from CPAN at http://www.cpan.org/authors/id/D/DO/DOUGL/\r
+# and follow the directions in the package to install.\r
+#\r
+# Not recommended if you have VC 6.x and you're not running Windows 9x.\r
+#\r
+#USE_PERLCRT = define\r
+\r
+#\r
+# uncomment to enable linking with setargv.obj under the Visual C\r
+# compiler. Setting this options enables perl to expand wildcards in\r
+# arguments, but it may be harder to use alternate methods like\r
+# File::DosGlob that are more powerful. This option is supported only with\r
+# Visual C.\r
+#\r
+#USE_SETARGV = define\r
+\r
+#\r
+# if you have the source for des_fcrypt(), uncomment this and make sure the\r
+# file exists (see README.win32). File should be located in the same\r
+# directory as this file.\r
+#\r
+#CRYPT_SRC = fcrypt.c\r
+\r
+#\r
+# if you didn't set CRYPT_SRC and if you have des_fcrypt() available in a\r
+# library, uncomment this, and make sure the library exists (see README.win32)\r
+# Specify the full pathname of the library.\r
+#\r
+#CRYPT_LIB = fcrypt.lib\r
+\r
+#\r
+# set this if you wish to use perl's malloc\r
+# WARNING: Turning this on/off WILL break binary compatibility with extensions\r
+# you may have compiled with/without it. Be prepared to recompile all\r
+# extensions if you change the default. Currently, this cannot be enabled\r
+# if you ask for USE_IMP_SYS above.\r
+#\r
+#PERL_MALLOC = define\r
+\r
+#\r
+# set the install locations of the compiler include/libraries\r
+# Running VCVARS32.BAT is *required* when using Visual C.\r
+# Some versions of Visual C don't define MSVCDIR in the environment,\r
+# so you may have to set CCHOME explicitly (spaces in the path name should\r
+# not be quoted)\r
+#\r
+#CCHOME = f:\msvc20\r
+CCHOME = $(MSVCDIR)\r
+CCINCDIR = $(CCHOME)\include\r
+CCLIBDIR = $(CCHOME)\lib\r
+\r
+#\r
+# Additional compiler flags can be specified here.\r
+#\r
+\r
+#\r
+# This should normally be disabled. Adding -DPERL_POLLUTE enables support\r
+# for old symbols by default, at the expense of extreme pollution. You most\r
+# probably just want to build modules that won't compile with\r
+# perl Makefile.PL POLLUTE=1\r
+# instead of enabling this. Please report such modules to the respective\r
+# authors.\r
+#\r
+#BUILDOPT = $(BUILDOPT) -DPERL_POLLUTE\r
+\r
+#\r
+# This should normally be disabled. Enabling it will disable the File::Glob\r
+# implementation of CORE::glob.\r
+#\r
+#BUILDOPT = $(BUILDOPT) -DPERL_EXTERNAL_GLOB\r
+\r
+#\r
+# This should normally be disabled. Enabling it causes perl to read scripts\r
+# in text mode (which is the 5.005 behavior) and will break ByteLoader.\r
+#BUILDOPT = $(BUILDOPT) -DPERL_TEXTMODE_SCRIPTS\r
+\r
+#\r
+# specify semicolon-separated list of extra directories that modules will\r
+# look for libraries (spaces in path names need not be quoted)\r
+#\r
+EXTRALIBDIRS =\r
+\r
+#\r
+# set this to your email address (perl will guess a value from\r
+# from your loginname and your hostname, which may not be right)\r
+#\r
+#EMAIL =\r
+\r
+##\r
+## Build configuration ends.\r
+##\r
+\r
+##################### CHANGE THESE ONLY IF YOU MUST #####################\r
+\r
+!IF "$(CRYPT_SRC)$(CRYPT_LIB)" == ""\r
+D_CRYPT = undef\r
+!ELSE\r
+D_CRYPT = define\r
+CRYPT_FLAG = -DHAVE_DES_FCRYPT\r
+!ENDIF\r
+\r
+!IF "$(PERL_MALLOC)" == ""\r
+PERL_MALLOC = undef\r
+!ENDIF\r
+\r
+!IF "$(USE_5005THREADS)" == ""\r
+USE_5005THREADS = undef\r
+!ENDIF\r
+\r
+!IF "$(USE_5005THREADS)" == "define"\r
+USE_ITHREADS = undef\r
+!ENDIF\r
+\r
+!IF "$(USE_IMP_SYS)" == "define"\r
+PERL_MALLOC = undef\r
+!ENDIF\r
+\r
+!IF "$(USE_MULTI)" == ""\r
+USE_MULTI = undef\r
+!ENDIF\r
+\r
+!IF "$(USE_ITHREADS)" == ""\r
+USE_ITHREADS = undef\r
+!ENDIF\r
+\r
+!IF "$(USE_IMP_SYS)" == ""\r
+USE_IMP_SYS = undef\r
+!ENDIF\r
+\r
+!IF "$(USE_PERLIO)" == ""\r
+USE_PERLIO = undef\r
+!ENDIF\r
+\r
+!IF "$(USE_PERLCRT)" == ""\r
+USE_PERLCRT = undef\r
+!ENDIF\r
+\r
+!IF "$(USE_IMP_SYS)$(USE_MULTI)$(USE_5005THREADS)" == "defineundefundef"\r
+USE_MULTI = define\r
+!ENDIF\r
+\r
+!IF "$(USE_ITHREADS)$(USE_MULTI)" == "defineundef"\r
+USE_MULTI = define\r
+USE_5005THREADS = undef\r
+!ENDIF\r
+\r
+!IF "$(USE_MULTI)$(USE_5005THREADS)" != "undefundef"\r
+BUILDOPT = $(BUILDOPT) -DPERL_IMPLICIT_CONTEXT\r
+!ENDIF\r
+\r
+!IF "$(USE_IMP_SYS)" != "undef"\r
+BUILDOPT = $(BUILDOPT) -DPERL_IMPLICIT_SYS\r
+!ENDIF\r
+\r
+!IF "$(PROCESSOR_ARCHITECTURE)" == ""\r
+PROCESSOR_ARCHITECTURE = x86\r
+!ENDIF\r
+\r
+!IF "$(USE_5005THREADS)" == "define"\r
+ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-thread\r
+!ELSE\r
+!IF "$(USE_MULTI)" == "define"\r
+ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-multi\r
+!ELSE\r
+!IF "$(USE_PERLIO)" == "define"\r
+ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-perlio\r
+!ELSE\r
+ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)\r
+!ENDIF\r
+!ENDIF\r
+!ENDIF\r
+\r
+!IF "$(USE_PERLIO)" == "define"\r
+BUILDOPT = $(BUILDOPT) -DUSE_PERLIO\r
+!ENDIF\r
+\r
+!IF "$(USE_ITHREADS)" == "define"\r
+ARCHNAME = $(ARCHNAME)-thread\r
+!ENDIF\r
+\r
+# Visual Studio 98 specific\r
+!IF "$(CCTYPE)" == "MSVC60"\r
+\r
+# VC 6.0 can load the socket dll on demand. Makes the test suite\r
+# run in about 10% less time.\r
+DELAYLOAD = -DELAYLOAD:wsock32.dll -DELAYLOAD:shell32.dll delayimp.lib\r
+!ENDIF\r
+\r
+ARCHDIR = ..\lib\$(ARCHNAME)\r
+COREDIR = ..\lib\CORE\r
+AUTODIR = ..\lib\auto\r
+LIBDIR = ..\lib\r
+EXTDIR = ..\ext\r
+PODDIR = ..\pod\r
+EXTUTILSDIR = $(LIBDIR)\ExtUtils\r
+\r
+#\r
+INST_SCRIPT = $(INST_TOP)$(INST_VER)\bin\r
+INST_BIN = $(INST_SCRIPT)$(INST_ARCH)\r
+INST_LIB = $(INST_TOP)$(INST_VER)\lib\r
+INST_ARCHLIB = $(INST_LIB)$(INST_ARCH)\r
+INST_COREDIR = $(INST_ARCHLIB)\CORE\r
+INST_POD = $(INST_LIB)\pod\r
+INST_HTML = $(INST_TOP)$(INST_VER)\html\r
+\r
+#\r
+# Programs to compile, build .lib files and link\r
+#\r
+\r
+CC = cl\r
+LINK32 = link\r
+LIB32 = $(LINK32) -lib\r
+RSC = rc\r
+\r
+#\r
+# Options\r
+#\r
+\r
+INCLUDES = -I$(COREDIR) -I.\include -I. -I..\r
+#PCHFLAGS = -Fpc:\temp\vcmoduls.pch -YX\r
+DEFINES = -DWIN32 -D_CONSOLE -DNO_STRICT $(CRYPT_FLAG)\r
+LOCDEFS = -DPERLDLL -DPERL_CORE\r
+SUBSYS = console\r
+CXX_FLAG = -TP -GX\r
+\r
+!IF "$(USE_PERLCRT)" != "define"\r
+LIBC = msvcrt.lib\r
+!ELSE\r
+LIBC = PerlCRT.lib\r
+!ENDIF\r
+\r
+PERLEXE_RES =\r
+PERLDLL_RES =\r
+\r
+!IF "$(CFG)" == "Debug"\r
+! IF "$(CCTYPE)" == "MSVC20"\r
+OPTIMIZE = -Od -MD -Z7 -DDEBUGGING\r
+! ELSE\r
+OPTIMIZE = -Od -MD -Zi -DDEBUGGING\r
+! ENDIF\r
+LINK_DBG = -debug -pdb:none\r
+!ELSE\r
+# -O1 yields smaller code, which turns out to be faster than -O2\r
+#OPTIMIZE = -O2 -MD -DNDEBUG\r
+OPTIMIZE = -O1 -MD -DNDEBUG\r
+LINK_DBG = -release\r
+!ENDIF\r
+\r
+!IF "$(USE_PERLCRT)" != "define"\r
+BUILDOPT = $(BUILDOPT) -DPERL_MSVCRT_READFIX\r
+!ENDIF\r
+\r
+LIBBASEFILES = $(CRYPT_LIB) \\r
+ oldnames.lib kernel32.lib user32.lib gdi32.lib winspool.lib \\r
+ comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib \\r
+ netapi32.lib uuid.lib wsock32.lib mpr.lib winmm.lib \\r
+ version.lib odbc32.lib odbccp32.lib\r
+\r
+# we add LIBC here, since we may be using PerlCRT.dll\r
+LIBFILES = $(LIBBASEFILES) $(LIBC)\r
+\r
+CFLAGS = -nologo -Gf -W3 $(INCLUDES) $(DEFINES) $(LOCDEFS) \\r
+ $(PCHFLAGS) $(OPTIMIZE)\r
+LINK_FLAGS = -nologo -nodefaultlib $(LINK_DBG) \\r
+ -libpath:"$(INST_COREDIR)" \\r
+ -machine:$(PROCESSOR_ARCHITECTURE)\r
+OBJOUT_FLAG = -Fo\r
+EXEOUT_FLAG = -Fe\r
+\r
+CFLAGS_O = $(CFLAGS) $(BUILDOPT)\r
+\r
+#################### do not edit below this line #######################\r
+############# NO USER-SERVICEABLE PARTS BEYOND THIS POINT ##############\r
+\r
+o = .obj\r
+\r
+#\r
+# Rules\r
+#\r
+\r
+.SUFFIXES : .c $(o) .dll .lib .exe .rc .res\r
+\r
+.c$(o):\r
+ $(CC) -c -I$(<D) $(CFLAGS_O) $(OBJOUT_FLAG)$@ $<\r
+\r
+.y.c:\r
+ $(NOOP)\r
+\r
+$(o).dll:\r
+ $(LINK32) -dll -subsystem:windows -implib:$(*B).lib -def:$(*B).def \\r
+ -out:$@ $(LINK_FLAGS) $(LIBFILES) $< $(LIBPERL)\r
+\r
+.rc.res:\r
+ $(RSC) -i.. $<\r
+\r
+#\r
+# various targets\r
+\r
+# makedef.pl must be updated if this changes, and this should normally\r
+# only change when there is an incompatible revision of the public API.\r
+# XXX so why did we change it from perl56 to perl57?\r
+PERLIMPLIB = ..\perl57.lib\r
+PERLDLL = ..\perl57.dll\r
+\r
+MINIPERL = ..\miniperl.exe\r
+MINIDIR = .\mini\r
+PERLEXE = ..\perl.exe\r
+WPERLEXE = ..\wperl.exe\r
+GLOBEXE = ..\perlglob.exe\r
+CONFIGPM = ..\lib\Config.pm\r
+MINIMOD = ..\lib\ExtUtils\Miniperl.pm\r
+X2P = ..\x2p\a2p.exe\r
+\r
+# Nominate a target which causes extensions to be re-built\r
+# This used to be $(PERLEXE), but at worst it is the .dll that they depend\r
+# on and really only the interface - i.e. the .def file used to export symbols\r
+# from the .dll\r
+PERLDEP = perldll.def\r
+\r
+PL2BAT = bin\pl2bat.pl\r
+GLOBBAT = bin\perlglob.bat\r
+\r
+UTILS = \\r
+ ..\utils\h2ph \\r
+ ..\utils\splain \\r
+ ..\utils\dprofpp \\r
+ ..\utils\perlbug \\r
+ ..\utils\pl2pm \\r
+ ..\utils\c2ph \\r
+ ..\utils\h2xs \\r
+ ..\utils\perldoc \\r
+ ..\utils\perlcc \\r
+ ..\utils\perlivp \\r
+ ..\utils\libnetcfg \\r
+ ..\pod\checkpods \\r
+ ..\pod\pod2html \\r
+ ..\pod\pod2latex \\r
+ ..\pod\pod2man \\r
+ ..\pod\pod2text \\r
+ ..\pod\pod2usage \\r
+ ..\pod\podchecker \\r
+ ..\pod\podselect \\r
+ ..\x2p\find2perl \\r
+ ..\x2p\s2p \\r
+ ..\lib\ExtUtils\xsubpp \\r
+ bin\exetype.pl \\r
+ bin\runperl.pl \\r
+ bin\pl2bat.pl \\r
+ bin\perlglob.pl \\r
+ bin\search.pl\r
+\r
+MAKE = nmake -nologo\r
+MAKE_BARE = nmake\r
+\r
+CFGSH_TMPL = config.vc\r
+CFGH_TMPL = config_H.vc\r
+\r
+XCOPY = xcopy /f /r /i /d\r
+RCOPY = xcopy /f /r /i /e /d\r
+NOOP = @echo\r
+NULL =\r
+\r
+DEL = del\r
+\r
+#\r
+# filenames given to xsubpp must have forward slashes (since it puts\r
+# full pathnames in #line strings)\r
+XSUBPP = ..\$(MINIPERL) -I..\..\lib ..\$(EXTUTILSDIR)\xsubpp \\r
+ -C++ -prototypes\r
+\r
+MICROCORE_SRC = \\r
+ ..\av.c \\r
+ ..\deb.c \\r
+ ..\doio.c \\r
+ ..\doop.c \\r
+ ..\dump.c \\r
+ ..\globals.c \\r
+ ..\gv.c \\r
+ ..\hv.c \\r
+ ..\locale.c \\r
+ ..\mg.c \\r
+ ..\numeric.c \\r
+ ..\op.c \\r
+ ..\perl.c \\r
+ ..\perlapi.c \\r
+ ..\perly.c \\r
+ ..\pp.c \\r
+ ..\pp_ctl.c \\r
+ ..\pp_hot.c \\r
+ ..\pp_pack.c \\r
+ ..\pp_sort.c \\r
+ ..\pp_sys.c \\r
+ ..\regcomp.c \\r
+ ..\regexec.c \\r
+ ..\run.c \\r
+ ..\scope.c \\r
+ ..\sv.c \\r
+ ..\taint.c \\r
+ ..\toke.c \\r
+ ..\universal.c \\r
+ ..\utf8.c \\r
+ ..\util.c \\r
+ ..\xsutils.c\r
+\r
+EXTRACORE_SRC = $(EXTRACORE_SRC) perllib.c\r
+\r
+!IF "$(PERL_MALLOC)" == "define"\r
+EXTRACORE_SRC = $(EXTRACORE_SRC) ..\malloc.c\r
+!ENDIF\r
+\r
+EXTRACORE_SRC = $(EXTRACORE_SRC) ..\perlio.c\r
+\r
+WIN32_SRC = \\r
+ .\win32.c \\r
+ .\win32sck.c \\r
+ .\win32thread.c\r
+\r
+!IF "$(USE_PERLIO)" == "define"\r
+WIN32_SRC = $(WIN32_SRC) .\win32io.c\r
+!ENDIF\r
+\r
+!IF "$(CRYPT_SRC)" != ""\r
+WIN32_SRC = $(WIN32_SRC) .\$(CRYPT_SRC)\r
+!ENDIF\r
+\r
+DLL_SRC = $(DYNALOADER).c\r
+\r
+X2P_SRC = \\r
+ ..\x2p\a2p.c \\r
+ ..\x2p\hash.c \\r
+ ..\x2p\str.c \\r
+ ..\x2p\util.c \\r
+ ..\x2p\walk.c\r
+\r
+CORE_NOCFG_H = \\r
+ ..\av.h \\r
+ ..\cop.h \\r
+ ..\cv.h \\r
+ ..\dosish.h \\r
+ ..\embed.h \\r
+ ..\form.h \\r
+ ..\gv.h \\r
+ ..\handy.h \\r
+ ..\hv.h \\r
+ ..\iperlsys.h \\r
+ ..\mg.h \\r
+ ..\nostdio.h \\r
+ ..\op.h \\r
+ ..\opcode.h \\r
+ ..\perl.h \\r
+ ..\perlapi.h \\r
+ ..\perlsdio.h \\r
+ ..\perlsfio.h \\r
+ ..\perly.h \\r
+ ..\pp.h \\r
+ ..\proto.h \\r
+ ..\regexp.h \\r
+ ..\scope.h \\r
+ ..\sv.h \\r
+ ..\thread.h \\r
+ ..\unixish.h \\r
+ ..\utf8.h \\r
+ ..\util.h \\r
+ ..\warnings.h \\r
+ ..\XSUB.h \\r
+ ..\EXTERN.h \\r
+ ..\perlvars.h \\r
+ ..\intrpvar.h \\r
+ ..\thrdvar.h \\r
+ .\include\dirent.h \\r
+ .\include\netdb.h \\r
+ .\include\sys\socket.h \\r
+ .\win32.h\r
+\r
+CORE_H = $(CORE_NOCFG_H) .\config.h\r
+\r
+MICROCORE_OBJ = $(MICROCORE_SRC:.c=.obj)\r
+CORE_OBJ = $(MICROCORE_OBJ) $(EXTRACORE_SRC:.c=.obj)\r
+WIN32_OBJ = $(WIN32_SRC:.c=.obj)\r
+MINICORE_OBJ = $(MICROCORE_OBJ:..\=.\mini\) \\r
+ $(MINIDIR)\miniperlmain$(o) \\r
+ $(MINIDIR)\perlio$(o)\r
+MINIWIN32_OBJ = $(WIN32_OBJ:.\=.\mini\)\r
+MINI_OBJ = $(MINICORE_OBJ) $(MINIWIN32_OBJ)\r
+DLL_OBJ = $(DLL_SRC:.c=.obj)\r
+X2P_OBJ = $(X2P_SRC:.c=.obj)\r
+\r
+PERLDLL_OBJ = $(CORE_OBJ)\r
+PERLEXE_OBJ = perlmain$(o)\r
+\r
+PERLDLL_OBJ = $(PERLDLL_OBJ) $(WIN32_OBJ) $(DLL_OBJ)\r
+#PERLEXE_OBJ = $(PERLEXE_OBJ) $(WIN32_OBJ) $(DLL_OBJ)\r
+\r
+!IF "$(USE_SETARGV)" != ""\r
+SETARGV_OBJ = setargv$(o)\r
+!ENDIF\r
+\r
+DYNALOADER = $(EXTDIR)\DynaLoader\DynaLoader\r
+SOCKET = $(EXTDIR)\Socket\Socket\r
+FCNTL = $(EXTDIR)\Fcntl\Fcntl\r
+OPCODE = $(EXTDIR)\Opcode\Opcode\r
+SDBM_FILE = $(EXTDIR)\SDBM_File\SDBM_File\r
+IO = $(EXTDIR)\IO\IO\r
+POSIX = $(EXTDIR)\POSIX\POSIX\r
+ATTRS = $(EXTDIR)\attrs\attrs\r
+THREAD = $(EXTDIR)\Thread\Thread\r
+B = $(EXTDIR)\B\B\r
+RE = $(EXTDIR)\re\re\r
+DUMPER = $(EXTDIR)\Data\Dumper\Dumper\r
+ERRNO = $(EXTDIR)\Errno\Errno\r
+PEEK = $(EXTDIR)\Devel\Peek\Peek\r
+BYTELOADER = $(EXTDIR)\ByteLoader\ByteLoader\r
+DPROF = $(EXTDIR)\Devel\DProf\DProf\r
+GLOB = $(EXTDIR)\File\Glob\Glob\r
+HOSTNAME = $(EXTDIR)\Sys\Hostname\Hostname\r
+STORABLE = $(EXTDIR)\Storable\Storable\r
+FILTER = $(EXTDIR)\Filter\Util\Call\Call\r
+ENCODE = $(EXTDIR)\Encode\Encode\r
+MD5 = $(EXTDIR)\Digest\MD5\MD5\r
+PERLIOSCALAR = $(EXTDIR)\PerlIO\Scalar\Scalar\r
+MIMEBASE64 = $(EXTDIR)\MIME\Base64\Base64\r
+TIMEHIRES = $(EXTDIR)\Time\HiRes\HiRes\r
+CWD = $(EXTDIR)\Cwd\Cwd\r
+LISTUTIL = $(EXTDIR)\List\Util\Util\r
+PERLIOVIA = $(EXTDIR)\PerlIO\Via\Via\r
+XSTYPEMAP = $(EXTDIR)\XS\Typemap\Typemap\r
+UNICODENORMALIZE = $(EXTDIR)\Unicode\Normalize\Normalize\r
+\r
+SOCKET_DLL = $(AUTODIR)\Socket\Socket.dll\r
+FCNTL_DLL = $(AUTODIR)\Fcntl\Fcntl.dll\r
+OPCODE_DLL = $(AUTODIR)\Opcode\Opcode.dll\r
+SDBM_FILE_DLL = $(AUTODIR)\SDBM_File\SDBM_File.dll\r
+IO_DLL = $(AUTODIR)\IO\IO.dll\r
+POSIX_DLL = $(AUTODIR)\POSIX\POSIX.dll\r
+ATTRS_DLL = $(AUTODIR)\attrs\attrs.dll\r
+THREAD_DLL = $(AUTODIR)\Thread\Thread.dll\r
+B_DLL = $(AUTODIR)\B\B.dll\r
+DUMPER_DLL = $(AUTODIR)\Data\Dumper\Dumper.dll\r
+PEEK_DLL = $(AUTODIR)\Devel\Peek\Peek.dll\r
+RE_DLL = $(AUTODIR)\re\re.dll\r
+BYTELOADER_DLL = $(AUTODIR)\ByteLoader\ByteLoader.dll\r
+DPROF_DLL = $(AUTODIR)\Devel\DProf\DProf.dll\r
+GLOB_DLL = $(AUTODIR)\File\Glob\Glob.dll\r
+HOSTNAME_DLL = $(AUTODIR)\Sys\Hostname\Hostname.dll\r
+STORABLE_DLL = $(AUTODIR)\Storable\Storable.dll\r
+FILTER_DLL = $(AUTODIR)\Filter\Util\Call\Call.dll\r
+ENCODE_DLL = $(AUTODIR)\Encode\Encode.dll\r
+MD5_DLL = $(AUTODIR)\Digest\MD5\MD5.dll\r
+PERLIOSCALAR_DLL = $(AUTODIR)\PerlIO\Scalar\Scalar.dll\r
+MIMEBASE64_DLL = $(AUTODIR)\MIME\Base64\Base64.dll\r
+TIMEHIRES_DLL = $(AUTODIR)\Time\HiRes\HiRes.dll\r
+CWD_DLL = $(AUTODIR)\Cwd\Cwd.dll\r
+LISTUTIL_DLL = $(AUTODIR)\List\Util\Util.dll\r
+PERLIOVIA_DLL = $(AUTODIR)\PerlIO\Via\Via.dll\r
+XSTYPEMAP_DLL = $(AUTODIR)\XS\Typemap\Typemap.dll\r
+UNICODENORMALIZE_DLL = $(AUTODIR)\Unicode\Normalize\Normalize.dll\r
+\r
+EXTENSION_C = \\r
+ $(SOCKET).c \\r
+ $(FCNTL).c \\r
+ $(OPCODE).c \\r
+ $(SDBM_FILE).c \\r
+ $(IO).c \\r
+ $(POSIX).c \\r
+ $(ATTRS).c \\r
+ $(THREAD).c \\r
+ $(RE).c \\r
+ $(DUMPER).c \\r
+ $(PEEK).c \\r
+ $(B).c \\r
+ $(BYTELOADER).c \\r
+ $(DPROF).c \\r
+ $(GLOB).c \\r
+ $(HOSTNAME).c \\r
+ $(STORABLE).c \\r
+ $(FILTER).c \\r
+ $(ENCODE).c \\r
+ $(MD5).c \\r
+ $(PERLIOSCALAR).c \\r
+ $(MIMEBASE64).c \\r
+ $(TIMEHIRES).c \\r
+ $(CWD).c \\r
+ $(LISTUTIL).c \\r
+ $(PERLIOVIA).c \\r
+ $(XSTYPEMAP).c \\r
+ $(UNICODENORMALIZE).c\r
+\r
+EXTENSION_DLL = \\r
+ $(SOCKET_DLL) \\r
+ $(FCNTL_DLL) \\r
+ $(OPCODE_DLL) \\r
+ $(SDBM_FILE_DLL)\\r
+ $(IO_DLL) \\r
+ $(POSIX_DLL) \\r
+ $(ATTRS_DLL) \\r
+ $(DUMPER_DLL) \\r
+ $(PEEK_DLL) \\r
+ $(B_DLL) \\r
+ $(RE_DLL) \\r
+ $(THREAD_DLL) \\r
+ $(BYTELOADER_DLL) \\r
+ $(DPROF_DLL) \\r
+ $(GLOB_DLL) \\r
+ $(HOSTNAME_DLL) \\r
+ $(STORABLE_DLL) \\r
+ $(FILTER_DLL) \\r
+ $(ENCODE_DLL) \\r
+ $(MD5_DLL) \\r
+ $(PERLIOSCALAR_DLL) \\r
+ $(MIMEBASE64_DLL) \\r
+ $(TIMEHIRES_DLL) \\r
+ $(CWD_DLL) \\r
+ $(LISTUTIL_DLL) \\r
+ $(PERLIOVIA_DLL) \\r
+ $(XSTYPEMAP_DLL) \\r
+ $(UNICODENORMALIZE_DLL)\r
+\r
+POD2HTML = $(PODDIR)\pod2html\r
+POD2MAN = $(PODDIR)\pod2man\r
+POD2LATEX = $(PODDIR)\pod2latex\r
+POD2TEXT = $(PODDIR)\pod2text\r
+\r
+CFG_VARS = \\r
+ "INST_DRV=$(INST_DRV)" \\r
+ "INST_TOP=$(INST_TOP)" \\r
+ "INST_VER=$(INST_VER)" \\r
+ "INST_ARCH=$(INST_ARCH)" \\r
+ "archname=$(ARCHNAME)" \\r
+ "cc=$(CC)" \\r
+ "ld=$(LINK32)" \\r
+ "ccflags=-nologo -Gf -W3 $(OPTIMIZE:"=\") $(DEFINES) $(BUILDOPT)" \\r
+ "cf_email=$(EMAIL)" \\r
+ "d_crypt=$(D_CRYPT)" \\r
+ "d_mymalloc=$(PERL_MALLOC)" \\r
+ "libs=$(LIBFILES)" \\r
+ "incpath=$(CCINCDIR:"=\")" \\r
+ "libperl=$(PERLIMPLIB:..\=)" \\r
+ "libpth=$(CCLIBDIR:"=\");$(EXTRALIBDIRS:"=\")" \\r
+ "libc=$(LIBC)" \\r
+ "make=$(MAKE_BARE)" \\r
+ "use5005threads=$(USE_5005THREADS)" \\r
+ "useithreads=$(USE_ITHREADS)" \\r
+ "usethreads=$(USE_5005THREADS)" \\r
+ "usemultiplicity=$(USE_MULTI)" \\r
+ "useperlio=$(USE_PERLIO)" \\r
+ "LINK_FLAGS=$(LINK_FLAGS:"=\")" \\r
+ "optimize=$(OPTIMIZE:"=\")"\r
+\r
+#\r
+# Top targets\r
+#\r
+\r
+all : .\config.h $(GLOBEXE) $(MINIMOD) $(CONFIGPM) $(PERLEXE) \\r
+ $(X2P) Extensions\r
+ @echo Everything is up to date. '$(MAKE_BARE) test' to run test suite.\r
+\r
+$(DYNALOADER)$(o) : $(DYNALOADER).c $(CORE_H) $(EXTDIR)\DynaLoader\dlutils.c\r
+\r
+#------------------------------------------------------------\r
+\r
+$(GLOBEXE) : perlglob$(o)\r
+ $(LINK32) $(LINK_FLAGS) $(LIBFILES) -out:$@ -subsystem:$(SUBSYS) \\r
+ perlglob$(o) setargv$(o)\r
+\r
+perlglob$(o) : perlglob.c\r
+\r
+config.w32 : $(CFGSH_TMPL)\r
+ copy $(CFGSH_TMPL) config.w32\r
+\r
+.\config.h : $(CFGH_TMPL)\r
+ -del /f config.h\r
+ copy $(CFGH_TMPL) config.h\r
+\r
+..\config.sh : config.w32 $(MINIPERL) config_sh.PL\r
+ $(MINIPERL) -I..\lib config_sh.PL $(CFG_VARS) config.w32 > ..\config.sh\r
+\r
+# this target is for when changes to the main config.sh happen\r
+# edit config.{b,v,g}c and make this target once for each supported\r
+# compiler (e.g. `nmake CCTYPE=BORLAND regen_config_h`)\r
+regen_config_h:\r
+ perl config_sh.PL $(CFG_VARS) $(CFGSH_TMPL) > ..\config.sh\r
+ cd ..\r
+ -del /f perl.exe\r
+ perl configpm\r
+ cd win32\r
+ -del /f $(CFGH_TMPL)\r
+ -mkdir $(COREDIR)\r
+ -perl -I..\lib config_h.PL "INST_VER=$(INST_VER)"\r
+ rename config.h $(CFGH_TMPL)\r
+\r
+$(CONFIGPM) : $(MINIPERL) ..\config.sh config_h.PL ..\minimod.pl\r
+ cd ..\r
+ miniperl configpm\r
+ cd win32\r
+ if exist lib\* $(RCOPY) lib\*.* ..\lib\$(NULL)\r
+ $(XCOPY) ..\*.h $(COREDIR)\*.*\r
+ $(XCOPY) *.h $(COREDIR)\*.*\r
+ $(XCOPY) ..\ext\re\re.pm $(LIBDIR)\*.*\r
+ $(RCOPY) include $(COREDIR)\*.*\r
+ -$(MINIPERL) -I..\lib config_h.PL "INST_VER=$(INST_VER)"\r
+ if errorlevel 1 $(MAKE) /$(MAKEFLAGS) $(CONFIGPM)\r
+\r
+$(MINIPERL) : $(MINIDIR) $(MINI_OBJ)\r
+ $(LINK32) -subsystem:console -out:$@ @<<\r
+ $(LINK_FLAGS) $(LIBFILES) $(MINI_OBJ)\r
+<<\r
+\r
+$(MINIDIR) :\r
+ if not exist "$(MINIDIR)" mkdir "$(MINIDIR)"\r
+\r
+$(MINICORE_OBJ) : $(CORE_NOCFG_H)\r
+ $(CC) -c $(CFLAGS) -DPERL_EXTERNAL_GLOB $(OBJOUT_FLAG)$@ ..\$(*F).c\r
+\r
+$(MINIWIN32_OBJ) : $(CORE_NOCFG_H)\r
+ $(CC) -c $(CFLAGS) $(OBJOUT_FLAG)$@ $(*F).c\r
+\r
+# -DPERL_IMPLICIT_SYS needs C++ for perllib.c\r
+# This is the only file that depends on perlhost.h, vmem.h, and vdir.h\r
+!IF "$(USE_IMP_SYS)" == "define"\r
+perllib$(o) : perllib.c .\perlhost.h .\vdir.h .\vmem.h\r
+ $(CC) -c -I. $(CFLAGS_O) $(CXX_FLAG) $(OBJOUT_FLAG)$@ perllib.c\r
+!ENDIF\r
+\r
+# 1. we don't want to rebuild miniperl.exe when config.h changes\r
+# 2. we don't want to rebuild miniperl.exe with non-default config.h\r
+$(MINI_OBJ) : $(CORE_NOCFG_H)\r
+\r
+$(WIN32_OBJ) : $(CORE_H)\r
+$(CORE_OBJ) : $(CORE_H)\r
+$(DLL_OBJ) : $(CORE_H)\r
+$(X2P_OBJ) : $(CORE_H)\r
+\r
+perldll.def : $(MINIPERL) $(CONFIGPM) ..\global.sym ..\pp.sym ..\makedef.pl\r
+ $(MINIPERL) -w ..\makedef.pl PLATFORM=win32 $(OPTIMIZE) $(DEFINES) $(BUILDOPT) \\r
+ CCTYPE=$(CCTYPE) > perldll.def\r
+\r
+$(PERLDLL): perldll.def $(PERLDLL_OBJ) $(PERLDLL_RES)\r
+ $(LINK32) -dll -def:perldll.def -base:0x28000000 -out:$@ @<<\r
+ $(LINK_FLAGS) $(DELAYLOAD) $(LIBFILES) $(PERLDLL_OBJ) $(PERLDLL_RES)\r
+<<\r
+ $(XCOPY) $(PERLIMPLIB) $(COREDIR)\r
+\r
+$(MINIMOD) : $(MINIPERL) ..\minimod.pl\r
+ cd ..\r
+ miniperl minimod.pl > lib\ExtUtils\Miniperl.pm\r
+ cd win32\r
+\r
+..\x2p\a2p$(o) : ..\x2p\a2p.c\r
+ $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\a2p.c\r
+\r
+..\x2p\hash$(o) : ..\x2p\hash.c\r
+ $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\hash.c\r
+\r
+..\x2p\str$(o) : ..\x2p\str.c\r
+ $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\str.c\r
+\r
+..\x2p\util$(o) : ..\x2p\util.c\r
+ $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\util.c\r
+\r
+..\x2p\walk$(o) : ..\x2p\walk.c\r
+ $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\walk.c\r
+\r
+$(X2P) : $(MINIPERL) $(X2P_OBJ)\r
+ $(MINIPERL) ..\x2p\find2perl.PL\r
+ $(MINIPERL) ..\x2p\s2p.PL\r
+ $(LINK32) -subsystem:console -out:$@ @<<\r
+ $(LINK_FLAGS) $(LIBFILES) $(X2P_OBJ)\r
+<<\r
+\r
+perlmain.c : runperl.c\r
+ copy runperl.c perlmain.c\r
+\r
+perlmain$(o) : perlmain.c\r
+ $(CC) $(CFLAGS_O) -UPERLDLL $(OBJOUT_FLAG)$@ -c perlmain.c\r
+\r
+$(PERLEXE): $(PERLDLL) $(CONFIGPM) $(PERLEXE_OBJ) $(PERLEXE_RES)\r
+ $(LINK32) -subsystem:console -out:$@ -stack:0x1000000 $(LINK_FLAGS) \\r
+ $(LIBFILES) $(PERLEXE_OBJ) $(SETARGV_OBJ) $(PERLIMPLIB) $(PERLEXE_RES)\r
+ copy $(PERLEXE) $(WPERLEXE)\r
+ $(MINIPERL) -I..\lib bin\exetype.pl $(WPERLEXE) WINDOWS\r
+ copy splittree.pl ..\r
+ $(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)\r
+\r
+$(DYNALOADER).c: $(MINIPERL) $(EXTDIR)\DynaLoader\dl_win32.xs $(CONFIGPM)\r
+ if not exist $(AUTODIR) mkdir $(AUTODIR)\r
+ cd $(EXTDIR)\$(*B)\r
+ ..\$(MINIPERL) -I..\..\lib $(*B)_pm.PL\r
+ ..\$(MINIPERL) -I..\..\lib XSLoader_pm.PL\r
+ cd ..\..\win32\r
+ $(XCOPY) $(EXTDIR)\$(*B)\$(*B).pm $(LIBDIR)\$(NULL)\r
+ $(XCOPY) $(EXTDIR)\$(*B)\XSLoader.pm $(LIBDIR)\$(NULL)\r
+ cd $(EXTDIR)\$(*B)\r
+ $(XSUBPP) dl_win32.xs > $(*B).c\r
+ cd ..\..\win32\r
+\r
+$(EXTDIR)\DynaLoader\dl_win32.xs: dl_win32.xs\r
+ copy dl_win32.xs $(EXTDIR)\DynaLoader\dl_win32.xs\r
+\r
+#----------------------------------------------------------------------------------\r
+Extensions: buildext.pl $(PERLDEP) $(CONFIGPM)\r
+ $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR)\r
+\r
+Extensions_clean: \r
+ -if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) clean\r
+\r
+#----------------------------------------------------------------------------------\r
+\r
+doc: $(PERLEXE)\r
+ $(PERLEXE) -I..\lib ..\installhtml --podroot=.. --htmldir=./html \\r
+ --podpath=pod:lib:ext:utils --htmlroot="file://$(INST_HTML::=|)" \\r
+ --libpod=perlfunc:perlguts:perlvar:perlrun:perlop --recurse\r
+\r
+utils: $(PERLEXE) $(X2P)\r
+ cd ..\utils\r
+ $(MAKE) PERL=$(MINIPERL)\r
+ cd ..\pod\r
+ copy ..\README.aix .\perlaix.pod\r
+ copy ..\README.amiga .\perlamiga.pod\r
+ copy ..\README.apollo .\perlapollo.pod\r
+ copy ..\README.beos .\perlbeos.pod\r
+ copy ..\README.bs2000 .\perlbs2000.pod\r
+ copy ..\README.ce .\perlce.pod\r
+ copy ..\README.cygwin .\perlcygwin.pod\r
+ copy ..\README.dgux .\perldgux.pod\r
+ copy ..\README.dos .\perldos.pod\r
+ copy ..\README.epoc .\perlepoc.pod\r
+ copy ..\README.hurd .\perlhurd.pod\r
+ copy ..\README.hpux .\perlhpux.pod\r
+ copy ..\README.machten .\perlmachten.pod\r
+ copy ..\README.macos .\perlmacos.pod\r
+ copy ..\README.mint .\perlmint.pod\r
+ copy ..\README.mpeix .\perlmpeix.pod\r
+ copy ..\README.netware .\perlnetware.pod\r
+ copy ..\README.os2 .\perlos2.pod\r
+ copy ..\README.os390 .\perlos390.pod\r
+ copy ..\README.plan9 .\perlplan9.pod\r
+ copy ..\README.qnx .\perlqnx.pod\r
+ copy ..\README.solaris .\perlsolaris.pod\r
+ copy ..\README.tru64 .\perltru64.pod\r
+ copy ..\README.uts .\perluts.pod\r
+ copy ..\README.vmesa .\perlvmesa.pod\r
+ copy ..\vms\perlvms.pod .\perlvms.pod\r
+ copy ..\README.vos .\perlvos.pod\r
+ copy ..\README.win32 .\perlwin32.pod\r
+ $(MAKE) -f ..\win32\pod.mak converters\r
+ cd ..\lib\r
+ $(PERLEXE) lib_pm.PL\r
+ cd ..\win32\r
+ $(PERLEXE) $(PL2BAT) $(UTILS)\r
+\r
+distclean: clean\r
+ -del /f $(MINIPERL) $(PERLEXE) $(PERLDLL) $(GLOBEXE) \\r
+ $(PERLIMPLIB) ..\miniperl.lib $(MINIMOD)\r
+ -del /f *.def *.map\r
+ -del /f $(EXTENSION_DLL)\r
+ -del /f $(EXTENSION_C) $(DYNALOADER).c $(ERRNO).pm\r
+ -del /f $(EXTDIR)\DynaLoader\dl_win32.xs\r
+ -del /f $(LIBDIR)\.exists $(LIBDIR)\attrs.pm $(LIBDIR)\DynaLoader.pm\r
+ -del /f $(LIBDIR)\XSLoader.pm\r
+ -del /f $(LIBDIR)\Fcntl.pm $(LIBDIR)\IO.pm $(LIBDIR)\Opcode.pm\r
+ -del /f $(LIBDIR)\ops.pm $(LIBDIR)\Safe.pm\r
+ -del /f $(LIBDIR)\SDBM_File.pm $(LIBDIR)\Socket.pm $(LIBDIR)\POSIX.pm\r
+ -del /f $(LIBDIR)\B.pm $(LIBDIR)\O.pm $(LIBDIR)\re.pm\r
+ -del /f $(LIBDIR)\Data\Dumper.pm $(LIBDIR)\ByteLoader.pm\r
+ -del /f $(LIBDIR)\Devel\Peek.pm $(LIBDIR)\Devel\DProf.pm\r
+ -del /f $(LIBDIR)\File\Glob.pm\r
+ -del /f $(LIBDIR)\Storable.pm\r
+ -del /f $(LIBDIR)\Filter\Util\Call.pm\r
+ -del /f $(LIBDIR)\Digest\MD5.pm\r
+ -del /f $(LIBDIR)\PerlIO\Scalar.pm\r
+ -del /f $(LIBDIR)\PerlIO\Via.pm\r
+ -del /f $(LIBDIR)\MIME\Base64.pm\r
+ -del /f $(LIBDIR)\MIME\QuotedPrint.pm\r
+ -del /f $(LIBDIR)\List\Util.pm\r
+ -del /f $(LIBDIR)\Scalar\Util.pm\r
+ -del /f $(LIBDIR)\Time\HiRes.pm\r
+ -del /f $(LIBDIR)\XS\Typemap.pm\r
+ -del /f $(LIBDIR)\Unicode\Normalize.pm\r
+ -if exist $(LIBDIR)\IO rmdir /s /q $(LIBDIR)\IO\r
+ -rmdir /s $(LIBDIR)\IO\r
+ -if exist $(LIBDIR)\Thread rmdir /s /q $(LIBDIR)\Thread\r
+ -rmdir /s $(LIBDIR)\Thread\r
+ -if exist $(LIBDIR)\B rmdir /s /q $(LIBDIR)\B\r
+ -rmdir /s $(LIBDIR)\B\r
+ -if exist $(LIBDIR)\Data rmdir /s /q $(LIBDIR)\Data\r
+ -rmdir /s $(LIBDIR)\Data\r
+ -if exist $(LIBDIR)\Filter\Util rmdir /s /q $(LIBDIR)\Filter\Util\r
+ -if exist $(LIBDIR)\Digest rmdir /s /q $(LIBDIR)\Digest\r
+ -rmdir /s $(LIBDIR)\Digest\r
+ -if exist $(LIBDIR)\MIME rmdir /s /q $(LIBDIR)\MIME\r
+ -rmdir /s $(LIBDIR)\MIME\r
+ -if exist $(LIBDIR)\List rmdir /s /q $(LIBDIR)\List\r
+ -rmdir /s $(LIBDIR)\List\r
+ -if exist $(LIBDIR)\Scalar rmdir /s /q $(LIBDIR)\Scalar\r
+ -rmdir /s $(LIBDIR)\Scalar\r
+ -if exist $(LIBDIR)\XS rmdir /s /q $(LIBDIR)\XS\r
+ -rmdir /s $(LIBDIR)\XS\r
+ cd $(PODDIR)\r
+ -del /f *.html *.bat checkpods \\r
+ perlaix.pod perlamiga.pod perlapollo.pod perlbeos.pod \\r
+ perlbs2000.pod perlce.pod perlcygwin.pod perldgux.pod \\r
+ perldos.pod perlepoc.pod perlhurd.pod \\r
+ perlhpux.pod perlmachten.pod \\r
+ perlmacos.pod perlmint.pod perlmpeix.pod perlnetware.pod \\r
+ perlos2.pod perlos390.pod perlplan9.pod perlqnx.pod \\r
+ perlsolaris.pod perltru64.pod perluts.pod \\r
+ perlvmesa.pod perlvms.pod perlvos.pod \\r
+ perlwin32.pod pod2html pod2latex pod2man pod2text pod2usage \\r
+ podchecker podselect\r
+ cd ..\utils\r
+ -del /f h2ph splain perlbug pl2pm c2ph h2xs perldoc perlivp dprofpp\r
+ -del /f *.bat\r
+ cd ..\win32\r
+ cd ..\x2p\r
+ -del /f find2perl s2p\r
+ -del /f *.bat\r
+ cd ..\win32\r
+ -del /f ..\config.sh ..\splittree.pl perlmain.c dlutils.c config.h.new\r
+ -del /f $(CONFIGPM)\r
+ -del /f bin\*.bat\r
+ cd $(EXTDIR)\r
+ -del /s *.lib *.def *.map *.pdb *.bs Makefile *$(o) pm_to_blib\r
+ cd ..\win32\r
+ -if exist $(AUTODIR) rmdir /s /q $(AUTODIR)\r
+ -rmdir /s $(AUTODIR)\r
+ -if exist $(COREDIR) rmdir /s /q $(COREDIR)\r
+ -rmdir /s $(COREDIR)\r
+\r
+install : all installbare installhtml\r
+\r
+installbare : utils\r
+ $(PERLEXE) ..\installperl\r
+ if exist $(WPERLEXE) $(XCOPY) $(WPERLEXE) $(INST_BIN)\*.*\r
+ $(XCOPY) $(GLOBEXE) $(INST_BIN)\*.*\r
+ $(XCOPY) bin\*.bat $(INST_SCRIPT)\*.*\r
+\r
+installhtml : doc\r
+ $(RCOPY) html\*.* $(INST_HTML)\*.*\r
+\r
+inst_lib : $(CONFIGPM)\r
+ copy splittree.pl ..\r
+ $(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)\r
+ $(RCOPY) ..\lib $(INST_LIB)\*.*\r
+\r
+minitest : $(MINIPERL) $(GLOBEXE) $(CONFIGPM) utils\r
+ $(XCOPY) $(MINIPERL) ..\t\perl.exe\r
+ $(XCOPY) $(GLOBEXE) ..\t\$(NULL)\r
+ attrib -r ..\t\*.*\r
+ copy test ..\t\r
+ cd ..\t\r
+ $(MINIPERL) -I..\lib test base/*.t comp/*.t cmd/*.t io/*.t op/*.t pragma/*.t\r
+ cd ..\win32\r
+\r
+test-prep : all utils\r
+ $(XCOPY) $(PERLEXE) ..\t\$(NULL)\r
+ $(XCOPY) $(PERLDLL) ..\t\$(NULL)\r
+ $(XCOPY) $(GLOBEXE) ..\t\$(NULL)\r
+\r
+test : test-prep\r
+ cd ..\t\r
+ $(PERLEXE) -I..\lib harness\r
+ cd ..\win32\r
+\r
+test-notty : test-prep\r
+ set PERL_SKIP_TTY_TEST=1\r
+ cd ..\t\r
+ $(PERLEXE) -I..\lib harness\r
+ cd ..\win32\r
+\r
+test-wide : test-prep\r
+ set HARNESS_PERL_SWITCHES=-C\r
+ cd ..\t\r
+ $(PERLEXE) -I..\lib harness\r
+ cd ..\win32\r
+\r
+test-wide-notty : test-prep\r
+ set PERL_SKIP_TTY_TEST=1\r
+ set HARNESS_PERL_SWITCHES=-C\r
+ cd ..\t\r
+ $(PERLEXE) -I..\lib harness\r
+ cd ..\win32\r
+\r
+clean : Extensions_clean\r
+ -@$(DEL) miniperlmain$(o)\r
+ -@$(DEL) $(MINIPERL)\r
+ -@$(DEL) perlglob$(o)\r
+ -@$(DEL) perlmain$(o)\r
+ -@$(DEL) config.w32\r
+ -@$(DEL) config.h\r
+ -@$(DEL) $(GLOBEXE)\r
+ -@$(DEL) $(PERLEXE)\r
+ -@$(DEL) $(WPERLEXE)\r
+ -@$(DEL) $(PERLDLL)\r
+ -@$(DEL) $(CORE_OBJ)\r
+ -if exist $(MINIDIR) rmdir /s /q $(MINIDIR)\r
+ -rmdir /s $(MINIDIR)\r
+ -@$(DEL) $(WIN32_OBJ)\r
+ -@$(DEL) $(DLL_OBJ)\r
+ -@$(DEL) $(X2P_OBJ)\r
+ -@$(DEL) ..\*$(o) ..\*.lib ..\*.exp *$(o) *.lib *.exp *.res\r
+ -@$(DEL) ..\t\*.exe ..\t\*.dll ..\t\*.bat\r
+ -@$(DEL) ..\x2p\*.exe ..\x2p\*.bat\r
+ -@$(DEL) *.ilk\r
+ -@$(DEL) *.pdb\r
+\r
+# Handy way to run perlbug -ok without having to install and run the\r
+# installed perlbug. We don't re-run the tests here - we trust the user.\r
+# Please *don't* use this unless all tests pass.\r
+# If you want to report test failures, use "nmake nok" instead.\r
+ok: utils\r
+ $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)"\r
+\r
+okfile: utils\r
+ $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)" -F perl.ok\r
+\r
+nok: utils\r
+ $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)"\r
+\r
+nokfile: utils\r
+ $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)" -F perl.nok\r
projects / p5sagit/p5-mst-13.2.git / commitdiff