Update README.vos and release vos build macros

Message-Id: <200205052114.RAA26329@mailhub2.stratus.com>
To: perl5-porters@perl.org

p4raw-id: //depot/perl@16419

diff --git a/MANIFEST b/MANIFEST
index e89acce..65dc335 100644 (file)
--- a/MANIFEST
+++ b/MANIFEST
@@ -2674,17 +2674,20 @@ vms/vmsish.h                    VMS-specific C header for Perl core
 vms/vmspipe.com                        VMS-specific piped command helper script
 vms/vms_yfix.pl                        convert Unix perly.[ch] to VMS perly_[ch].vms
 vms/writemain.pl               Generate perlmain.c from miniperlmain.c+extensions
-vos/build.cm                   VOS command macro to build Perl
+vos/build.cm                   VOS command macro to build "mini" Perl
 vos/Changes                    Changes made to port Perl to the VOS operating system
-vos/compile_perl.cm            VOS command macro to build multiple version of Perl
+vos/compile_full_perl.cm       VOS command macro to build "full" Perl
+vos/compile_perl.cm            VOS command macro to build "mini" Perl
 vos/config.alpha.def           definitions used by config.pl
 vos/config.alpha.h             config.h for use with alpha VOS POSIX.1 support
 vos/config.ga.def              definitions used by config.pl
 vos/config.ga.h                        config.h for use with generally-available VOS POSIX.1 support
 vos/config.pl                  script to convert a config_h.SH to a config.h
-vos/configure_perl.cm          VOS command macro to configure perl before building
-vos/install_perl.cm            VOS command macro to install perl after building
+vos/configure_full_perl.sh     VOS shell script to configure "full" perl before building
+vos/configure_perl.cm          VOS command macro to configure "mini" perl before building
+vos/install_perl.cm            VOS command macro to install "mini" perl after building
 vos/Makefile                   A helper for maintaining the config.*.* in UNIX
+vos/make_full_perl.sh  VOS shell script to build and test "full" perl
 vos/perl.bind                  VOS bind control file
 vos/test_vos_dummies.c         Test program for "vos_dummies.c"
 vos/vos.c                      VOS emulations for missing POSIX functions

diff --git a/README.vos b/README.vos
index 8807908..624e77e 100644 (file)
--- a/README.vos
+++ b/README.vos
@@ -44,7 +44,7 @@ using the VOS Standard C Cross-compiler.  You must build perl on
 VOS Release 14.1.0 (or later) on an XA/R or Continuum platform.
 
 This version of perl is properly called "miniperl" because it
-does not contain the full perl functionality.
+does not contain the complete perl functionality.
 
 You must build perl with the compile_perl.cm command macro found
 in the vos subdirectory.
@@ -58,7 +58,7 @@ perl on VOS Release 14.1.0 (or later) on an XA/R or Continuum
 platform.
 
 This version of perl is properly called "miniperl" because it
-does not contain the full perl functionality.
+does not contain the complete perl functionality.
 
 You must build perl with the compile_perl.cm command macro found
 in the vos subdirectory.
@@ -73,7 +73,7 @@ on VOS Release 14.1.0 (or later) on an XA/R or Continuum
 platform.
 
 This version of perl is properly called "miniperl" because it
-does not contain the full perl functionality.
+does not contain the complete perl functionality.
 
 You must build perl with the compile_perl.cm command macro found
 in the vos subdirectory.
@@ -81,14 +81,14 @@ in the vos subdirectory.
 =item 4
 
 If you have a Stratus Continuum (PARISC-based) platform that is
-running VOS Release 14.3.0 through VOS Release 14.4.0, you must
+running VOS Release 14.3.0 through VOS Release 14.4.1, you must
 build perl using the generally-available version of VOS POSIX
 support, and using either the VOS Standard C compiler or the VOS
 GNU C compiler.  You must build perl on VOS Release 14.3.0 (or
 later) on a Continuum platform.
 
 This version of perl is properly called "miniperl" because it
-does not contain the full perl functionality.
+does not contain the complete perl functionality.
 
 You must build perl with the compile_perl.cm command macro found
 in the vos subdirectory.
@@ -96,17 +96,17 @@ in the vos subdirectory.
 =item 5
 
 If you have a Stratus Continuum (PA-RISC-based) platform that is
-running VOS Release 14.4.1 or later, you must build perl using
-the generally-available version of VOS POSIX support.  You must
-use the VOS GNU C compiler and the VOS GNU Tools product.  You
-must build perl on VOS Release 14.4.1 (or later) on a Continuum
-platform.
-
-This version of perl is properly called "full perl" because it
-contains the full perl functionality.
-
-You must use the supplied Configure script and makefiles to build
-perl.
+running VOS Release 14.5.0 or later, you can either use the
+previous method to build "miniperl" or you can build "full
+perl", which contains the complete functionality of perl.  I
+strongly recommend that you build full perl.  To build full
+perl, you must use the generally-available version of VOS POSIX
+support.  You must use the VOS GNU C compiler and the VOS GNU
+C/C++ and GNU Tools Release 2.0.1 product.  You must build full
+perl on VOS Release 14.5.0 (or later) on a Continuum platform.
+
+You must build full perl with the compile_full_perl.cm command
+macro found in the vos subdirectory.
 
 =back
 
@@ -223,20 +223,11 @@ execute on the PA7100, PA8000, PA8500 and PA8600 processors, and
 that code compiled for the pa8000 processor type can execute on
 the PA8000, PA8500 and PA8600 processors.
 
-To build perl using the supplied Configure script and makefiles,
-execute the following commands.
-
-     !add_library_path command >system>gnu_library>bin -after '(current_dir)'
-     !bash
-          gzip -d perl-5.8.0.tar.gz
-          tar -xvf perl-5.8.0.tar
-          cd perl-5.8.0
-          Configure -d
-          gmake
-
-If you wish to run the test cases, type:
-
-          gmake test
+To build full perl using the supplied Configure script and
+makefiles, change to the "vos" subdirectory and type the command
+"compile_full_perl" or "start_process compile_full_perl".  This
+will configure, build, and test perl.  All of the test cases
+that are executed should pass.
 
 =head2 Installing Perl 5 on VOS
 
@@ -343,6 +334,6 @@ Paul Green (Paul.Green@stratus.com)
 
 =head1 LAST UPDATE
 
-February 15, 2001
+May 5, 2002
 
 =cut

diff --git a/vos/Changes b/vos/Changes
index 407b258..98bab9d 100644 (file)
--- a/vos/Changes
+++ b/vos/Changes
@@ -6,6 +6,9 @@ For 5.8.0:
      "install_perl.cm" to use directory naming conventions that
      are closer to the perl standard directory names.
 
+     Added "compile_full_perl.cm", "configure_full_perl.sh" and
+     "make_full_perl.sh" for building full perl.
+
      For the first time, full perl can now be built on VOS using
      its native Configure script and makefiles.  See README.vos
      for details.

diff --git a/vos/compile_full_perl.cm b/vos/compile_full_perl.cm
new file mode 100644 (file)
index 0000000..9af1a87
--- /dev/null
+++ b/vos/compile_full_perl.cm
@@ -0,0 +1,38 @@
+& This command macro builds and tests full perl using
+& the native perl build scripts.  The prerequsites for
+& using this macro are a VOS Continuum system running
+& VOS Release 14.5.0 and VOS GNU C/C++ and GNU Tools 2.0.1.
+& 
+& Written 02-05-05 by Paul Green (Paul.Green@stratus.com)
+&
+&begin_parameters
+     debug_sw       switch(-debug)
+&end_parameters
+&echo command_lines
+&
+!add_library_path command (master_disk)>system>gnu_library>bin &+
+     -after '(current_dir)'
+&
+&if (process_type) = interactive
+&then !set_terminal_parameters -pause_lines 0
+&
+&set_string release (before (after (module_info system_release) 'VOS Release ') ' ')
+&if &release& < '14.5'
+&then &do
+ &display_line You must be running VOS Release 14.5.0 or later to use this macro.
+ &return e$wrong_version
+&end
+&
+&if ^ (exists -directory (master_disk)>system>gnu_library>lib>perl5)
+&then &do
+ &display_line You must have S877 - GNU C/C++ and GNU Tools Release 2.0.1 to use this macro.
+ &return e$wrong_version
+&end
+&
+!change_current_dir <
+&
+&if &debug_sw&
+&then !bash vos/configure_full_perl.sh -DDEBUGGING -Doptimize=-g
+&else !bash vos/configure_full_perl.sh
+&
+!bash vos/make_full_perl.sh

diff --git a/vos/configure_full_perl.sh b/vos/configure_full_perl.sh
new file mode 100644 (file)
index 0000000..28eab52
--- /dev/null
+++ b/vos/configure_full_perl.sh
@@ -0,0 +1,21 @@
+# Configure environment variables for perl build.
+declare -x AWK="/system/gnu_library/bin/gawk.pm"
+export AWK
+declare -x CC="/system/gnu_library/bin/gcc.pm"
+export CC
+declare -x CPP="$CC $CPPFLAGS -E"
+export CPP
+declare -x CPPFLAGS="-D_POSIX_SOURCE=199506L -D_SYSV"
+export CPPFLAGS
+declare -x CONFIG_SHELL="bash"
+export CONFIG_SHELL
+declare -x LD="/system/gnu_library/bin/gcc.pm"
+export LD
+declare -x MAKE="/system/gnu_library/bin/gmake.pm"
+export MAKE
+declare -x RANLIB=":"
+export RANLIB
+declare -x SHELL="/system/gnu_library/bin/bash.pm"
+export SHELL
+#
+bash Configure -Dusedevel -des

diff --git a/vos/make_full_perl.sh b/vos/make_full_perl.sh
new file mode 100644 (file)
index 0000000..8abdafc
--- /dev/null
+++ b/vos/make_full_perl.sh
@@ -0,0 +1,3 @@
+# This macro makes full perl and runs its test scripts
+gmake
+gmake test