--- /dev/null
+=head1 NAME
+
+perlnumber - semantics of numbers and numeric operations in Perl
+
+=head1 SYNOPSIS
+
+ $n = 1234; # decimal integer
+ $n = 0b1110011; # binary integer
+ $n = 01234; # octal integer
+ $n = 0x1234; # hexadecimal integer
+ $n = 12.34e-56; # exponential notation
+ $n = "-12.34e56"; # number specified as a string
+ $n = "1234"; # number specified as a string
+ $n = v49.50.51.52; # number specified as a string, which in
+ # turn is specified in terms of numbers :-)
+
+=head1 DESCRIPTION
+
+This document describes how Perl internally handles numeric values.
+
+Perl's operator overloading facility is completely ignored here. Operator
+overloading allows user-defined behaviors for numbers, such as operations
+over arbitrarily large integers, floating points numbers with arbitrary
+precision, operations over "exotic" numbers such as modular arithmetic or
+p-adic arithmetic, and so on. See L<perlovl> for details.
+
+=head1 Storing numbers
+
+Perl can internally represents numbers in 3 different ways: as native
+integers, as native floating point numbers, and as decimal strings.
+Decimal strings may have an exponential notation part, as in C<"12.34e-56">.
+I<Native> here means "a format supported by the C compiler which was used
+to build perl".
+
+The term "native" does not mean quite as much when we talk about native
+integers, as it does when native floating point numbers are involved.
+The only implication of the term "native" on integers is that the limits for
+the maximal and the minimal supported true integral quantities are close to
+powers of 2. However, for "native" floats have a most fundamental
+restriction: they may represent only those numbers which have a relatively
+"short" representation when converted to a binary fraction. For example,
+0.9 cannot be respresented by a native float, since the binary fraction
+for 0.9 is infinite:
+
+ binary0.1110011001100...
+
+with the sequence C<1100> repeating again and again. In addition to this
+limitation, the exponent of the binary number is also restricted when it
+is represented as a floating point number. On typical hardware, floating
+point values can store numbers with up to 53 binary digits, and with binary
+exponents between -1024 and 1024. In decimal representation this is close
+to 16 decimal digits and decimal exponents in the range of -304..304.
+The upshot of all this is that Perl cannot store a number like
+12345678901234567 as a floating point number on such architectures without
+loss of information.
+
+Similarly, decimal strings may represent only those numbers which have a
+finite decimal expansion. Being strings, and thus of arbitrary length, there
+is no practical limit for the exponent or number of decimal digits for these
+numbers. (But realize that what we are discussing the rules for just the
+I<storage> of these numbers. The fact that you can store such "large" numbers
+does not mean that that the I<operations> over these numbers will use all
+of the significant digits.
+See L<"Numeric operations and numeric conversions"> for details.)
+
+In fact numbers stored in the native integer format may be stored either
+in the signed native form, or in the unsigned native form. Thus the limits
+for Perl numbers stored as native integers would typically be -2**31..2**32-1,
+with appropriate modifications in the case of 64-bit integers. Again, this
+does not mean that Perl can do operations only over integers in this range:
+it is possible to store many more integers in floating point format.
+
+Summing up, Perl numeric values can store only those numbers which have
+a finite decimal expansion or a "short" binary expansion.
+
+=head1 Numeric operators and numeric conversions
+
+As mentioned earlier, Perl can store a number in any one of three formats,
+but most operators typically understand only one of those formats. When
+a numeric value is passed as an argument to such an operator, it will be
+converted to the format understood by the operator.
+
+Six such conversions are possible:
+
+ native integer --> native floating point (*)
+ native integer --> decimal string
+ native floating_point --> native integer (*)
+ native floating_point --> decimal string (*)
+ decimal string --> native integer
+ decimal string --> native floating point (*)
+
+These conversions are governed by the following general rules:
+
+=over
+
+=item *
+
+If the source number can be represented in the target form, that
+representation is used.
+
+=item *
+
+If the source number is outside of the limits representable in the target form,
+a representation of the closest limit is used. (I<Loss of information>)
+
+=item *
+
+If the source number is between two numbers representable in the target form,
+a representation of one of these numbers is used. (I<Loss of information>)
+
+=item *
+
+In C<< native floating point --> native integer >> conversions the magnitude
+of the result is less than or equal to the magnitude of the source.
+(I<"Rounding to zero".>)
+
+=item *
+
+If the C<< decimal string --> native integer >> conversion cannot be done
+without loss of information, the result is compatible with the conversion
+sequence C<< decimal_string --> native_floating_point --> native_integer >>.
+In particular, rounding is strongly biased to 0, though a number like
+C<"0.99999999999999999999"> has a chance of being rounded to 1.
+
+=back
+
+B<RESTRICTION>: The conversions marked with C<(*)> above involve steps
+performed by the C compiler. In particular, bugs/features of the compiler
+used may lead to breakage of some of the above rules.
+
+=head1 Flavors of Perl numeric operations
+
+Perl operations which take a numeric argument treat that argument in one
+of four different ways: they may force it to one of the integer/floating/
+string formats, or they may behave differently depending on the format of
+the operand. Forcing a numeric value to a particular format does not
+change the number stored in the value.
+
+All the operators which need an argument in the integer format treat the
+argument as in modular arithmetic, e.g., C<mod 2**32> on a 32-bit
+architecture. C<sprintf "%u", -1> therefore provides the same result as
+C<sprintf "%u", ~0>.
+
+=over
+
+=item Arithmetic operators except, C<no integer>
+
+force the argument into the floating point format.
+
+=item Arithmetic operators except, C<use integer>
+
+=item Bitwise operators, C<no integer>
+
+force the argument into the integer format if it is not a string.
+
+=item Bitwise operators, C<use integer>
+
+force the argument into the integer format
+
+=item Operators which expect an integer
+
+force the argument into the integer format. This is applicable
+to the third and fourth arguments of C<sysread>, for example.
+
+=item Operators which expect a string
+
+force the argument into the string format. For example, this is
+applicable to C<printf "%s", $value>.
+
+=back
+
+Though forcing an argument into a particular form does not change the
+stored number, Perl remembers the result of such conversions. In
+particular, though the first such conversion may be time-consuming,
+repeated operations will not need to redo the conversion.
+
+=head1 AUTHOR
+
+Ilya Zakharevich C<ilya@math.ohio-state.edu>
+
+Editorial adjustments by Gurusamy Sarathy <gsar@ActiveState.com>
+
+=head1 SEE ALSO
+
+L<perlovl>
Finding the end, Removal of backslashes before delimiters, Interpolation,
C<<<'EOF'>, C<m''>, C<s'''>, C<tr///>, C<y///>, C<''>, C<q//>, C<"">,
-C<``>, C<qq//>, C<qx//>, C<<file*globE<gt>>, C<?RE?>, C</RE/>, C<m/RE/>,
+C<``>, C<qq//>, C<qx//>, C<< <file*glob> >>, C<?RE?>, C</RE/>, C<m/RE/>,
C<s/RE/foo/>,, Interpolation of regular expressions, Optimization of
regular expressions
=back
+=head2 perlnumber - semantics of numbers and numeric operations in Perl
+
+=over
+
+=item SYNOPSIS
+
+=item DESCRIPTION
+
+=item Storing numbers
+
+=item Numeric operators and numeric conversions
+
+=item Flavors of Perl numeric operations
+
+Arithmetic operators except, C<no integer>, Arithmetic operators except,
+C<use integer>, Bitwise operators, C<no integer>, Bitwise operators, C<use
+integer>, Operators which expect an integer, Operators which expect a
+string
+
+=item AUTHOR
+
+=item SEE ALSO
+
+=back
+
=head2 perldiag - various Perl diagnostics
=over
An Error Handler, An Event Driven Program
-=item THE PERL_CALL FUNCTIONS
+=item THE CALL_ FUNCTIONS
-perl_call_sv, perl_call_pv, perl_call_method, perl_call_argv
+call_sv, call_pv, call_method, call_argv
=item FLAG VALUES
=item Using G_KEEPERR
-=item Using perl_call_sv
+=item Using call_sv
-=item Using perl_call_argv
+=item Using call_argv
-=item Using perl_call_method
+=item Using call_method
=item Using GIMME_V
projects / p5sagit/p5-mst-13.2.git / commitdiff