*/
/*
- * Package name :
- * Source directory :
- * Configuration time:
- * Configured by :
+ * Package name : perl5
+ * Source directory : .
+ * Configuration time: Thu Jan 1 00:00:00 GMT 1970
+ * Configured by : root@localhost
* Target system : unknown
*/
*/
/*#define HAS_CHSIZE / **/
-/* HASCONST:
- * This symbol, if defined, indicates that this C compiler knows about
- * the const type. There is no need to actually test for that symbol
- * within your programs. The mere use of the "const" keyword will
- * trigger the necessary tests.
+/* HAS_CTERMID:
+ * This symbol, if defined, indicates that the ctermid routine is
+ * available to generate filename for terminal.
*/
-/*#define HASCONST / **/
-#ifndef HASCONST
-#define const
-#endif
+/*#define HAS_CTERMID / **/
/* HAS_CUSERID:
* This symbol, if defined, indicates that the cuserid routine is
*/
/*#define HAS_STRCOLL / **/
-/* USE_STRUCT_COPY:
- * This symbol, if defined, indicates that this C compiler knows how
- * to copy structures. If undefined, you'll need to use a block copy
- * routine of some sort instead.
- */
-/*#define USE_STRUCT_COPY / **/
-
/* HAS_STRTOD:
* This symbol, if defined, indicates that the strtod routine is
* available to provide better numeric string conversion than atof().
*/
/*#define HAS_USLEEP / **/
-/* HASVOLATILE:
- * This symbol, if defined, indicates that this C compiler knows about
- * the volatile declaration.
- */
-/*#define HASVOLATILE / **/
-#ifndef HASVOLATILE
-#define volatile
-#endif
-
/* HAS_WAIT4:
* This symbol, if defined, indicates that wait4() exists.
*/
* This symbol, if defined, indicates to the C program that it should
* include <arpa/inet.h> to get inet_addr and friends declarations.
*/
-#define I_ARPA_INET /**/
-
-/* I_ASSERT:
- * This symbol, if defined, indicates to the C program that it could
- * include <assert.h> to get the assert() macro.
- */
-#define I_ASSERT /**/
+/*#define I_ARPA_INET / **/
/* I_DBM:
* This symbol, if defined, indicates that <dbm.h> exists and should
/*#define I_DBM / **/
/*#define I_RPCSVC_DBM / **/
-/* I_DIRENT:
- * This symbol, if defined, indicates to the C program that it should
- * include <dirent.h>. Using this symbol also triggers the definition
- * of the Direntry_t define which ends up being 'struct dirent' or
- * 'struct direct' depending on the availability of <dirent.h>.
- */
-/* DIRNAMLEN:
- * This symbol, if defined, indicates to the C program that the length
- * of directory entry names is provided by a d_namlen field. Otherwise
- * you need to do strlen() on the d_name field.
- */
-/* Direntry_t:
- * This symbol is set to 'struct direct' or 'struct dirent' depending on
- * whether dirent is available or not. You should use this pseudo type to
- * portably declare your directory entries.
- */
-#define I_DIRENT /**/
-/*#define DIRNAMLEN / **/
-#define Direntry_t struct dirent
-
/* I_DLFCN:
* This symbol, if defined, indicates that <dlfcn.h> exists and should
* be included.
*/
/*#define I_FLOAT / **/
+/* I_GDBM:
+ * This symbol, if defined, indicates that <gdbm.h> exists and should
+ * be included.
+ */
+/*#define I_GDBM / **/
+
/* I_LIMITS:
* This symbol, if defined, indicates to the C program that it should
* include <limits.h> to get definition of symbols like WORD_BIT or
*/
/*#define I_MEMORY / **/
-/* I_NET_ERRNO:
- * This symbol, if defined, indicates that <net/errno.h> exists and
- * should be included.
- */
-/*#define I_NET_ERRNO / **/
-
/* I_NETINET_IN:
* This symbol, if defined, indicates to the C program that it should
* include <netinet/in.h>. Otherwise, you may try <sys/in.h>.
*/
/*#define I_VFORK / **/
-/* HAS_ACCESSX:
- * This symbol, if defined, indicates that the accessx routine is
- * available to do extended access checks.
+/* INTSIZE:
+ * This symbol contains the value of sizeof(int) so that the C
+ * preprocessor can make decisions based on it.
*/
-/*#define HAS_ACCESSX / **/
-
-/* HAS_EACCESS:
- * This symbol, if defined, indicates that the eaccess routine is
- * available to do extended access checks.
+/* LONGSIZE:
+ * This symbol contains the value of sizeof(long) so that the C
+ * preprocessor can make decisions based on it.
*/
-/*#define HAS_EACCESS / **/
-
-/* I_SYS_ACCESS:
- * This symbol, if defined, indicates to the C program that it should
- * include <sys/access.h>.
+/* SHORTSIZE:
+ * This symbol contains the value of sizeof(short) so that the C
+ * preprocessor can make decisions based on it.
*/
-/*#define I_SYS_ACCESS / **/
+#define INTSIZE 4 /**/
+#define LONGSIZE 4 /**/
+#define SHORTSIZE 2 /**/
-/* I_SYS_SECURITY:
- * This symbol, if defined, indicates to the C program that it should
- * include <sys/security.h>.
+/* MULTIARCH:
+ * This symbol, if defined, signifies that the build
+ * process will produce some binary files that are going to be
+ * used in a cross-platform environment. This is the case for
+ * example with the NeXT "fat" binaries that contain executables
+ * for several CPUs.
*/
-/*#define I_SYS_SECURITY / **/
+/*#define MULTIARCH / **/
-/* USE_CROSS_COMPILE:
- * This symbol, if defined, indicates that Perl is being cross-compiled.
- */
-/* PERL_TARGETARCH:
- * This symbol, if defined, indicates the target architecture
- * Perl has been cross-compiled to. Undefined if not a cross-compile.
+/* HAS_QUAD:
+ * This symbol, if defined, tells that there's a 64-bit integer type,
+ * Quad_t, and its unsigned counterpar, Uquad_t. QUADKIND will be one
+ * of QUAD_IS_INT, QUAD_IS_LONG, QUAD_IS_LONG_LONG, or QUAD_IS_INT64_T.
*/
-#ifndef USE_CROSS_COMPILE
-/*#define USE_CROSS_COMPILE / **/
-#define PERL_TARGETARCH "" /**/
+/*#define HAS_QUAD / **/
+#ifdef HAS_QUAD
+# define Quad_t int64_t /**/
+# define Uquad_t uint64_t /**/
+# define QUADKIND 4 /**/
+# define QUAD_IS_INT 1
+# define QUAD_IS_LONG 2
+# define QUAD_IS_LONG_LONG 3
+# define QUAD_IS_INT64_T 4
#endif
/* OSNAME:
* feature tests from Configure are generally more reliable.
*/
#define OSNAME "unknown" /**/
-#define OSVERS "" /**/
-
-/* MULTIARCH:
- * This symbol, if defined, signifies that the build
- * process will produce some binary files that are going to be
- * used in a cross-platform environment. This is the case for
- * example with the NeXT "fat" binaries that contain executables
- * for several CPUs.
- */
-/*#define MULTIARCH / **/
-
-/* MEM_ALIGNBYTES:
- * This symbol contains the number of bytes required to align a
- * double, or a long double when applicable. Usual values are 2,
- * 4 and 8. The default is eight, for safety.
- */
-#if defined(USE_CROSS_COMPILE) || defined(MULTIARCH)
-# define MEM_ALIGNBYTES 8
-#else
-#define MEM_ALIGNBYTES 4
-#endif
+#define OSVERS "unknown" /**/
/* ARCHLIB:
* This variable, if defined, holds the name of the directory in
* which the user wants to put architecture-dependent public
- * library files for . It is most often a local directory
+ * library files for perl5. It is most often a local directory
* such as /usr/local/lib. Programs using this variable must be
* prepared to deal with filename expansion. If ARCHLIB is the
* same as PRIVLIB, it is not defined, since presumably the
* This symbol contains the ~name expanded version of ARCHLIB, to be used
* in programs that are not prepared to deal with ~ expansion at run-time.
*/
-/*#define ARCHLIB "/usr/local/lib/perl5/5.9/unknown" / **/
-/*#define ARCHLIB_EXP "/usr/local/lib/perl5/5.9/unknown" / **/
+/*#define ARCHLIB "/usr/local/lib/perl5/5.11/unknown" / **/
+/*#define ARCHLIB_EXP "/usr/local/lib/perl5/5.11/unknown" / **/
/* ARCHNAME:
* This symbol holds a string representing the architecture name.
*/
#define ARCHNAME "unknown" /**/
-/* HAS_ATOLF:
- * This symbol, if defined, indicates that the atolf routine is
- * available to convert strings into long doubles.
- */
-/*#define HAS_ATOLF / **/
-
-/* HAS_ATOLL:
- * This symbol, if defined, indicates that the atoll routine is
- * available to convert strings into long longs.
- */
-/*#define HAS_ATOLL / **/
-
/* BIN:
* This symbol holds the path of the bin directory where the package will
* be installed. Program must be prepared to deal with ~name substitution.
* in @INC at run time based on the location of the perl binary.
*/
#define BIN "/usr/local/bin" /**/
-#define BIN_EXP "" /**/
+#define BIN_EXP "/usr/local/bin" /**/
#define PERL_RELOCATABLE_INC "undef" /**/
-/* INTSIZE:
- * This symbol contains the value of sizeof(int) so that the C
- * preprocessor can make decisions based on it.
- */
-/* LONGSIZE:
- * This symbol contains the value of sizeof(long) so that the C
- * preprocessor can make decisions based on it.
- */
-/* SHORTSIZE:
- * This symbol contains the value of sizeof(short) so that the C
- * preprocessor can make decisions based on it.
- */
-#define INTSIZE 4 /**/
-#define LONGSIZE 4 /**/
-#define SHORTSIZE 2 /**/
-
-/* BYTEORDER:
- * This symbol holds the hexadecimal constant defined in byteorder,
- * in a UV, i.e. 0x1234 or 0x4321 or 0x12345678, etc...
- * If the compiler supports cross-compiling or multiple-architecture
- * binaries (eg. on NeXT systems), use compiler-defined macros to
- * determine the byte order.
- * On NeXT 3.2 (and greater), you can build "Fat" Multiple Architecture
- * Binaries (MAB) on either big endian or little endian machines.
- * The endian-ness is available at compile-time. This only matters
- * for perl, where the config.h can be generated and installed on
- * one system, and used by a different architecture to build an
- * extension. Older versions of NeXT that might not have
- * defined either *_ENDIAN__ were all on Motorola 680x0 series,
- * so the default case (for NeXT) is big endian to catch them.
- * This might matter for NeXT 3.0.
- */
-#if defined(USE_CROSS_COMPILE) || defined(MULTIARCH)
-# ifdef __LITTLE_ENDIAN__
-# if LONGSIZE == 4
-# define BYTEORDER 0x1234
-# else
-# if LONGSIZE == 8
-# define BYTEORDER 0x12345678
-# endif
-# endif
-# else
-# ifdef __BIG_ENDIAN__
-# if LONGSIZE == 4
-# define BYTEORDER 0x4321
-# else
-# if LONGSIZE == 8
-# define BYTEORDER 0x87654321
-# endif
-# endif
-# endif
-# endif
-# if !defined(BYTEORDER) && (defined(NeXT) || defined(__NeXT__))
-# define BYTEORDER 0x4321
-# endif
-#else
-#define BYTEORDER 0x1234 /* large digits for MSB */
-#endif /* NeXT */
-
/* CAT2:
* This macro concatenates 2 tokens together.
*/
* This symbol is intended to be used along with CPPRUN in the same manner
* symbol CPPMINUS is used with CPPSTDIN. It contains either "-" or "".
*/
-#define CPPSTDIN ""
-#define CPPMINUS ""
-#define CPPRUN ""
-#define CPPLAST ""
-
-/* HAS__FWALK:
- * This symbol, if defined, indicates that the _fwalk system call is
- * available to apply a function to all the file handles.
- */
-/*#define HAS__FWALK / **/
+#define CPPSTDIN "cc -E"
+#define CPPMINUS "-"
+#define CPPRUN "cc -E"
+#define CPPLAST "-"
/* HAS_ACCESS:
* This manifest constant lets the C program know that the access()
*/
/*#define HAS_ACCESS / **/
-/* HAS_AINTL:
- * This symbol, if defined, indicates that the aintl routine is
- * available. If copysignl is also present we can emulate modfl.
+/* HAS_ACCESSX:
+ * This symbol, if defined, indicates that the accessx routine is
+ * available to do extended access checks.
*/
-/*#define HAS_AINTL / **/
+/*#define HAS_ACCESSX / **/
/* HAS_ASCTIME_R:
* This symbol, if defined, indicates that the asctime_r routine
/* HASATTRIBUTE_FORMAT:
* Can we handle GCC attribute for checking printf-style formats
*/
+/* PRINTF_FORMAT_NULL_OK:
+ * Allows __printf__ format to be null when checking printf-style
+ */
/* HASATTRIBUTE_MALLOC:
* Can we handle GCC attribute for malloc-style functions.
*/
* Can we handle GCC attribute for warning on unused results
*/
/*#define HASATTRIBUTE_FORMAT / **/
+/*#define PRINTF_FORMAT_NULL_OK / **/
/*#define HASATTRIBUTE_NORETURN / **/
/*#define HASATTRIBUTE_MALLOC / **/
/*#define HASATTRIBUTE_NONNULL / **/
/*#define HASATTRIBUTE_UNUSED / **/
/*#define HASATTRIBUTE_WARN_UNUSED_RESULT / **/
-/* HAS_BUILTIN_CHOOSE_EXPR:
- * Can we handle GCC builtin for compile-time ternary-like expressions
- */
-/* HAS_BUILTIN_EXPECT:
- * Can we handle GCC builtin for telling that certain values are more
- * likely
- */
-/*#define HAS_BUILTIN_EXPECT / **/
-/*#define HAS_BUILTIN_CHOOSE_EXPR / **/
-
-/* HAS_C99_VARIADIC_MACROS:
- * If defined, the compiler supports C99 variadic macros.
+/* HASCONST:
+ * This symbol, if defined, indicates that this C compiler knows about
+ * the const type. There is no need to actually test for that symbol
+ * within your programs. The mere use of the "const" keyword will
+ * trigger the necessary tests.
*/
-/*#define HAS_C99_VARIADIC_MACROS / **/
+/*#define HASCONST / **/
+#ifndef HASCONST
+#define const
+#endif
-/* CASTI32:
- * This symbol is defined if the C compiler can cast negative
- * or large floating point numbers to 32-bit ints.
+/* HAS_CRYPT:
+ * This symbol, if defined, indicates that the crypt routine is available
+ * to encrypt passwords and the like.
*/
-/*#define CASTI32 / **/
+/*#define HAS_CRYPT / **/
-/* CASTNEGFLOAT:
- * This symbol is defined if the C compiler can cast negative
- * numbers to unsigned longs, ints and shorts.
- */
-/* CASTFLAGS:
- * This symbol contains flags that say what difficulties the compiler
- * has casting odd floating values to unsigned long:
- * 0 = ok
- * 1 = couldn't cast < 0
- * 2 = couldn't cast >= 0x80000000
- * 4 = couldn't cast in argument expression list
- */
-/*#define CASTNEGFLOAT / **/
-#define CASTFLAGS 0 /**/
-
-/* HAS_CLASS:
- * This symbol, if defined, indicates that the class routine is
- * available to classify doubles. Available for example in AIX.
- * The returned values are defined in <float.h> and are:
- *
- * FP_PLUS_NORM Positive normalized, nonzero
- * FP_MINUS_NORM Negative normalized, nonzero
- * FP_PLUS_DENORM Positive denormalized, nonzero
- * FP_MINUS_DENORM Negative denormalized, nonzero
- * FP_PLUS_ZERO +0.0
- * FP_MINUS_ZERO -0.0
- * FP_PLUS_INF +INF
- * FP_MINUS_INF -INF
- * FP_NANS Signaling Not a Number (NaNS)
- * FP_NANQ Quiet Not a Number (NaNQ)
- */
-/*#define HAS_CLASS / **/
-
-/* HAS_CLEARENV:
- * This symbol, if defined, indicates that the clearenv () routine is
- * available for use.
- */
-/*#define HAS_CLEARENV / **/
-
-/* VOID_CLOSEDIR:
- * This symbol, if defined, indicates that the closedir() routine
- * does not return a value.
- */
-/*#define VOID_CLOSEDIR / **/
-
-/* HAS_STRUCT_CMSGHDR:
- * This symbol, if defined, indicates that the struct cmsghdr
- * is supported.
- */
-/*#define HAS_STRUCT_CMSGHDR / **/
-
-/* HAS_COPYSIGNL:
- * This symbol, if defined, indicates that the copysignl routine is
- * available. If aintl is also present we can emulate modfl.
- */
-/*#define HAS_COPYSIGNL / **/
-
-/* USE_CPLUSPLUS:
- * This symbol, if defined, indicates that a C++ compiler was
- * used to compiled Perl and will be used to compile extensions.
- */
-/*#define USE_CPLUSPLUS / **/
-
-/* HAS_CRYPT:
- * This symbol, if defined, indicates that the crypt routine is available
- * to encrypt passwords and the like.
- */
-/*#define HAS_CRYPT / **/
-
-/* HAS_CRYPT_R:
- * This symbol, if defined, indicates that the crypt_r routine
- * is available to crypt re-entrantly.
+/* HAS_CRYPT_R:
+ * This symbol, if defined, indicates that the crypt_r routine
+ * is available to crypt re-entrantly.
*/
/* CRYPT_R_PROTO:
* This symbol encodes the prototype of crypt_r.
/*#define HAS_CTIME_R / **/
#define CTIME_R_PROTO 0 /**/
-/* HAS_DBMINIT_PROTO:
- * This symbol, if defined, indicates that the system provides
- * a prototype for the dbminit() function. Otherwise, it is up
- * to the program to supply one. A good guess is
- * extern int dbminit(char *);
- */
-/*#define HAS_DBMINIT_PROTO / **/
-
-/* HAS_DIRFD:
- * This manifest constant lets the C program know that dirfd
- * is available.
- */
-/*#define HAS_DIRFD / **/
-
-/* DLSYM_NEEDS_UNDERSCORE:
- * This symbol, if defined, indicates that we need to prepend an
- * underscore to the symbol name before calling dlsym(). This only
- * makes sense if you *have* dlsym, which we will presume is the
- * case if you're using dl_dlopen.xs.
- */
-/*#define DLSYM_NEEDS_UNDERSCORE / **/
-
/* SETUID_SCRIPTS_ARE_SECURE_NOW:
* This symbol, if defined, indicates that the bug that prevents
* setuid scripts from being secure is not present in this kernel.
*/
/*#define HAS_DRAND48_PROTO / **/
+/* HAS_EACCESS:
+ * This symbol, if defined, indicates that the eaccess routine is
+ * available to do extended access checks.
+ */
+/*#define HAS_EACCESS / **/
+
/* HAS_ENDGRENT:
* This symbol, if defined, indicates that the getgrent routine is
* available for finalizing sequential access of the group database.
/*#define HAS_ENDSERVENT_R / **/
#define ENDSERVENT_R_PROTO 0 /**/
-/* HAS_FAST_STDIO:
- * This symbol, if defined, indicates that the "fast stdio"
- * is available to manipulate the stdio buffers directly.
- */
-/*#define HAS_FAST_STDIO / **/
-
-/* HAS_FCHDIR:
- * This symbol, if defined, indicates that the fchdir routine is
- * available to change directory using a file descriptor.
+/* FLEXFILENAMES:
+ * This symbol, if defined, indicates that the system supports filenames
+ * longer than 14 characters.
*/
-/*#define HAS_FCHDIR / **/
+/*#define FLEXFILENAMES / **/
-/* FCNTL_CAN_LOCK:
- * This symbol, if defined, indicates that fcntl() can be used
- * for file locking. Normally on Unix systems this is defined.
- * It may be undefined on VMS.
+/* HAS_GETGRENT:
+ * This symbol, if defined, indicates that the getgrent routine is
+ * available for sequential access of the group database.
*/
-/*#define FCNTL_CAN_LOCK / **/
+/*#define HAS_GETGRENT / **/
-/* HAS_FD_SET:
- * This symbol, when defined, indicates presence of the fd_set typedef
- * in <sys/types.h>
+/* HAS_GETGRENT_R:
+ * This symbol, if defined, indicates that the getgrent_r routine
+ * is available to getgrent re-entrantly.
*/
-/*#define HAS_FD_SET / **/
-
-/* HAS_FINITE:
- * This symbol, if defined, indicates that the finite routine is
- * available to check whether a double is finite (non-infinity non-NaN).
+/* GETGRENT_R_PROTO:
+ * This symbol encodes the prototype of getgrent_r.
+ * It is zero if d_getgrent_r is undef, and one of the
+ * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getgrent_r
+ * is defined.
*/
-/*#define HAS_FINITE / **/
+/*#define HAS_GETGRENT_R / **/
+#define GETGRENT_R_PROTO 0 /**/
-/* HAS_FINITEL:
- * This symbol, if defined, indicates that the finitel routine is
- * available to check whether a long double is finite
- * (non-infinity non-NaN).
+/* HAS_GETGRGID_R:
+ * This symbol, if defined, indicates that the getgrgid_r routine
+ * is available to getgrgid re-entrantly.
*/
-/*#define HAS_FINITEL / **/
-
-/* FLEXFILENAMES:
- * This symbol, if defined, indicates that the system supports filenames
- * longer than 14 characters.
+/* GETGRGID_R_PROTO:
+ * This symbol encodes the prototype of getgrgid_r.
+ * It is zero if d_getgrgid_r is undef, and one of the
+ * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getgrgid_r
+ * is defined.
*/
-/*#define FLEXFILENAMES / **/
+/*#define HAS_GETGRGID_R / **/
+#define GETGRGID_R_PROTO 0 /**/
-/* HAS_FLOCK_PROTO:
- * This symbol, if defined, indicates that the system provides
- * a prototype for the flock() function. Otherwise, it is up
- * to the program to supply one. A good guess is
- * extern int flock(int, int);
+/* HAS_GETGRNAM_R:
+ * This symbol, if defined, indicates that the getgrnam_r routine
+ * is available to getgrnam re-entrantly.
*/
-/*#define HAS_FLOCK_PROTO / **/
-
-/* HAS_FP_CLASS:
- * This symbol, if defined, indicates that the fp_class routine is
- * available to classify doubles. Available for example in Digital UNIX.
- * The returned values are defined in <math.h> and are:
- *
- * FP_SNAN Signaling NaN (Not-a-Number)
- * FP_QNAN Quiet NaN (Not-a-Number)
- * FP_POS_INF +infinity
- * FP_NEG_INF -infinity
- * FP_POS_NORM Positive normalized
- * FP_NEG_NORM Negative normalized
- * FP_POS_DENORM Positive denormalized
- * FP_NEG_DENORM Negative denormalized
- * FP_POS_ZERO +0.0 (positive zero)
- * FP_NEG_ZERO -0.0 (negative zero)
+/* GETGRNAM_R_PROTO:
+ * This symbol encodes the prototype of getgrnam_r.
+ * It is zero if d_getgrnam_r is undef, and one of the
+ * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getgrnam_r
+ * is defined.
*/
-/*#define HAS_FP_CLASS / **/
+/*#define HAS_GETGRNAM_R / **/
+#define GETGRNAM_R_PROTO 0 /**/
-/* HAS_FPCLASS:
- * This symbol, if defined, indicates that the fpclass routine is
- * available to classify doubles. Available for example in Solaris/SVR4.
- * The returned values are defined in <ieeefp.h> and are:
- *
- * FP_SNAN signaling NaN
- * FP_QNAN quiet NaN
- * FP_NINF negative infinity
- * FP_PINF positive infinity
- * FP_NDENORM negative denormalized non-zero
- * FP_PDENORM positive denormalized non-zero
- * FP_NZERO negative zero
- * FP_PZERO positive zero
- * FP_NNORM negative normalized non-zero
- * FP_PNORM positive normalized non-zero
+/* HAS_GETHOSTBYADDR:
+ * This symbol, if defined, indicates that the gethostbyaddr() routine is
+ * available to look up hosts by their IP addresses.
*/
-/*#define HAS_FPCLASS / **/
+/*#define HAS_GETHOSTBYADDR / **/
-/* HAS_FPCLASSIFY:
- * This symbol, if defined, indicates that the fpclassify routine is
- * available to classify doubles. Available for example in HP-UX.
- * The returned values are defined in <math.h> and are
- *
- * FP_NORMAL Normalized
- * FP_ZERO Zero
- * FP_INFINITE Infinity
- * FP_SUBNORMAL Denormalized
- * FP_NAN NaN
- *
+/* HAS_GETHOSTBYNAME:
+ * This symbol, if defined, indicates that the gethostbyname() routine is
+ * available to look up host names in some data base or other.
*/
-/*#define HAS_FPCLASSIFY / **/
+/*#define HAS_GETHOSTBYNAME / **/
-/* HAS_FPCLASSL:
- * This symbol, if defined, indicates that the fpclassl routine is
- * available to classify long doubles. Available for example in IRIX.
- * The returned values are defined in <ieeefp.h> and are:
- *
- * FP_SNAN signaling NaN
- * FP_QNAN quiet NaN
- * FP_NINF negative infinity
- * FP_PINF positive infinity
- * FP_NDENORM negative denormalized non-zero
- * FP_PDENORM positive denormalized non-zero
- * FP_NZERO negative zero
- * FP_PZERO positive zero
- * FP_NNORM negative normalized non-zero
- * FP_PNORM positive normalized non-zero
+/* HAS_GETHOSTENT:
+ * This symbol, if defined, indicates that the gethostent() routine is
+ * available to look up host names in some data base or another.
*/
-/*#define HAS_FPCLASSL / **/
+/*#define HAS_GETHOSTENT / **/
-/* HAS_FPOS64_T:
- * This symbol will be defined if the C compiler supports fpos64_t.
- */
-/*#define HAS_FPOS64_T / **/
-
-/* HAS_FREXPL:
- * This symbol, if defined, indicates that the frexpl routine is
- * available to break a long double floating-point number into
- * a normalized fraction and an integral power of 2.
- */
-/*#define HAS_FREXPL / **/
-
-/* HAS_STRUCT_FS_DATA:
- * This symbol, if defined, indicates that the struct fs_data
- * to do statfs() is supported.
- */
-/*#define HAS_STRUCT_FS_DATA / **/
-
-/* HAS_FSEEKO:
- * This symbol, if defined, indicates that the fseeko routine is
- * available to fseek beyond 32 bits (useful for ILP32 hosts).
- */
-/*#define HAS_FSEEKO / **/
-
-/* HAS_FSTATFS:
- * This symbol, if defined, indicates that the fstatfs routine is
- * available to stat filesystems by file descriptors.
- */
-/*#define HAS_FSTATFS / **/
-
-/* HAS_FSYNC:
- * This symbol, if defined, indicates that the fsync routine is
- * available to write a file's modified data and attributes to
- * permanent storage.
- */
-/*#define HAS_FSYNC / **/
-
-/* HAS_FTELLO:
- * This symbol, if defined, indicates that the ftello routine is
- * available to ftell beyond 32 bits (useful for ILP32 hosts).
- */
-/*#define HAS_FTELLO / **/
-
-/* HAS_FUTIMES:
- * This symbol, if defined, indicates that the futimes routine is
- * available to change file descriptor time stamps with struct timevals.
- */
-/*#define HAS_FUTIMES / **/
-
-/* Gconvert:
- * This preprocessor macro is defined to convert a floating point
- * number to a string without a trailing decimal point. This
- * emulates the behavior of sprintf("%g"), but is sometimes much more
- * efficient. If gconvert() is not available, but gcvt() drops the
- * trailing decimal point, then gcvt() is used. If all else fails,
- * a macro using sprintf("%g") is used. Arguments for the Gconvert
- * macro are: value, number of digits, whether trailing zeros should
- * be retained, and the output buffer.
- * The usual values are:
- * d_Gconvert='gconvert((x),(n),(t),(b))'
- * d_Gconvert='gcvt((x),(n),(b))'
- * d_Gconvert='sprintf((b),"%.*g",(n),(x))'
- * The last two assume trailing zeros should not be kept.
- */
-#define Gconvert(x,n,t,b) sprintf((b),"%.*g",(n),(x))
-
-/* HAS_GETCWD:
- * This symbol, if defined, indicates that the getcwd routine is
- * available to get the current working directory.
- */
-/*#define HAS_GETCWD / **/
-
-/* HAS_GETESPWNAM:
- * This symbol, if defined, indicates that the getespwnam system call is
- * available to retrieve enchanced (shadow) password entries by name.
- */
-/*#define HAS_GETESPWNAM / **/
-
-/* HAS_GETFSSTAT:
- * This symbol, if defined, indicates that the getfsstat routine is
- * available to stat filesystems in bulk.
- */
-/*#define HAS_GETFSSTAT / **/
-
-/* HAS_GETGRENT:
- * This symbol, if defined, indicates that the getgrent routine is
- * available for sequential access of the group database.
- */
-/*#define HAS_GETGRENT / **/
-
-/* HAS_GETGRENT_R:
- * This symbol, if defined, indicates that the getgrent_r routine
- * is available to getgrent re-entrantly.
- */
-/* GETGRENT_R_PROTO:
- * This symbol encodes the prototype of getgrent_r.
- * It is zero if d_getgrent_r is undef, and one of the
- * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getgrent_r
- * is defined.
- */
-/*#define HAS_GETGRENT_R / **/
-#define GETGRENT_R_PROTO 0 /**/
-
-/* HAS_GETGRGID_R:
- * This symbol, if defined, indicates that the getgrgid_r routine
- * is available to getgrgid re-entrantly.
- */
-/* GETGRGID_R_PROTO:
- * This symbol encodes the prototype of getgrgid_r.
- * It is zero if d_getgrgid_r is undef, and one of the
- * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getgrgid_r
- * is defined.
- */
-/*#define HAS_GETGRGID_R / **/
-#define GETGRGID_R_PROTO 0 /**/
-
-/* HAS_GETGRNAM_R:
- * This symbol, if defined, indicates that the getgrnam_r routine
- * is available to getgrnam re-entrantly.
- */
-/* GETGRNAM_R_PROTO:
- * This symbol encodes the prototype of getgrnam_r.
- * It is zero if d_getgrnam_r is undef, and one of the
- * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getgrnam_r
- * is defined.
- */
-/*#define HAS_GETGRNAM_R / **/
-#define GETGRNAM_R_PROTO 0 /**/
-
-/* HAS_GETHOSTBYADDR:
- * This symbol, if defined, indicates that the gethostbyaddr() routine is
- * available to look up hosts by their IP addresses.
- */
-/*#define HAS_GETHOSTBYADDR / **/
-
-/* HAS_GETHOSTBYNAME:
- * This symbol, if defined, indicates that the gethostbyname() routine is
- * available to look up host names in some data base or other.
- */
-/*#define HAS_GETHOSTBYNAME / **/
-
-/* HAS_GETHOSTENT:
- * This symbol, if defined, indicates that the gethostent() routine is
- * available to look up host names in some data base or another.
- */
-/*#define HAS_GETHOSTENT / **/
-
-/* HAS_GETHOSTNAME:
- * This symbol, if defined, indicates that the C program may use the
- * gethostname() routine to derive the host name. See also HAS_UNAME
- * and PHOSTNAME.
+/* HAS_GETHOSTNAME:
+ * This symbol, if defined, indicates that the C program may use the
+ * gethostname() routine to derive the host name. See also HAS_UNAME
+ * and PHOSTNAME.
*/
/* HAS_UNAME:
* This symbol, if defined, indicates that the C program may use the
/*#define HAS_UNAME / **/
/*#define HAS_PHOSTNAME / **/
#ifdef HAS_PHOSTNAME
-#define PHOSTNAME "" /* How to get the host name */
+#define PHOSTNAME "/bin/hostname" /* How to get the host name */
#endif
/* HAS_GETHOSTBYADDR_R:
*/
/*#define HAS_GETHOST_PROTOS / **/
-/* HAS_GETITIMER:
- * This symbol, if defined, indicates that the getitimer routine is
- * available to return interval timers.
- */
-/*#define HAS_GETITIMER / **/
-
/* HAS_GETLOGIN_R:
* This symbol, if defined, indicates that the getlogin_r routine
* is available to getlogin re-entrantly.
/*#define HAS_GETLOGIN_R / **/
#define GETLOGIN_R_PROTO 0 /**/
-/* HAS_GETMNT:
- * This symbol, if defined, indicates that the getmnt routine is
- * available to get filesystem mount info by filename.
- */
-/*#define HAS_GETMNT / **/
-
-/* HAS_GETMNTENT:
- * This symbol, if defined, indicates that the getmntent routine is
- * available to iterate through mounted file systems to get their info.
- */
-/*#define HAS_GETMNTENT / **/
-
/* HAS_GETNETBYADDR:
* This symbol, if defined, indicates that the getnetbyaddr() routine is
* available to look up networks by their IP addresses.
*/
/*#define HAS_GETNET_PROTOS / **/
-/* HAS_GETPAGESIZE:
- * This symbol, if defined, indicates that the getpagesize system call
- * is available to get system page size, which is the granularity of
- * many memory management calls.
- */
-/*#define HAS_GETPAGESIZE / **/
-
/* HAS_GETPROTOENT:
* This symbol, if defined, indicates that the getprotoent() routine is
* available to look up protocols in some data base or another.
*/
/*#define HAS_GETPROTO_PROTOS / **/
-/* HAS_GETPRPWNAM:
- * This symbol, if defined, indicates that the getprpwnam system call is
- * available to retrieve protected (shadow) password entries by name.
- */
-/*#define HAS_GETPRPWNAM / **/
-
/* HAS_GETPWENT:
* This symbol, if defined, indicates that the getpwent routine is
* available for sequential access of the passwd database.
*/
/*#define HAS_GETSERV_PROTOS / **/
-/* HAS_GETSPNAM:
- * This symbol, if defined, indicates that the getspnam system call is
- * available to retrieve SysV shadow password entries by name.
- */
-/*#define HAS_GETSPNAM / **/
-
/* HAS_GETSPNAM_R:
* This symbol, if defined, indicates that the getspnam_r routine
* is available to getspnam re-entrantly.
/*#define HAS_GMTIME_R / **/
#define GMTIME_R_PROTO 0 /**/
-/* HAS_GNULIBC:
- * This symbol, if defined, indicates to the C program that
- * the GNU C library is being used. A better check is to use
- * the __GLIBC__ and __GLIBC_MINOR__ symbols supplied with glibc.
- */
-/*#define HAS_GNULIBC / **/
-#if defined(HAS_GNULIBC) && !defined(_GNU_SOURCE)
-# define _GNU_SOURCE
-#endif
-/* HAS_HASMNTOPT:
- * This symbol, if defined, indicates that the hasmntopt routine is
- * available to query the mount options of file systems.
- */
-/*#define HAS_HASMNTOPT / **/
-
/* HAS_HTONL:
* This symbol, if defined, indicates that the htonl() routine (and
* friends htons() ntohl() ntohs()) are available to do network
/*#define HAS_NTOHL / **/
/*#define HAS_NTOHS / **/
-/* HAS_ILOGBL:
- * This symbol, if defined, indicates that the ilogbl routine is
- * available. If scalbnl is also present we can emulate frexpl.
+/* HAS_LOCALTIME_R:
+ * This symbol, if defined, indicates that the localtime_r routine
+ * is available to localtime re-entrantly.
*/
-/*#define HAS_ILOGBL / **/
-
-/* HAS_INT64_T:
- * This symbol will defined if the C compiler supports int64_t.
- * Usually the <inttypes.h> needs to be included, but sometimes
- * <sys/types.h> is enough.
+/* LOCALTIME_R_NEEDS_TZSET:
+ * Many libc's localtime_r implementations do not call tzset,
+ * making them differ from localtime(), and making timezone
+ * changes using $ENV{TZ} without explicitly calling tzset
+ * impossible. This symbol makes us call tzset before localtime_r
*/
-/*#define HAS_INT64_T / **/
+/*#define LOCALTIME_R_NEEDS_TZSET / **/
+#ifdef LOCALTIME_R_NEEDS_TZSET
+#define L_R_TZSET tzset(),
+#else
+#define L_R_TZSET
+#endif
-/* HAS_ISASCII:
- * This manifest constant lets the C program know that isascii
- * is available.
+/* LOCALTIME_R_PROTO:
+ * This symbol encodes the prototype of localtime_r.
+ * It is zero if d_localtime_r is undef, and one of the
+ * REENTRANT_PROTO_T_ABC macros of reentr.h if d_localtime_r
+ * is defined.
*/
-/*#define HAS_ISASCII / **/
+/*#define HAS_LOCALTIME_R / **/
+#define LOCALTIME_R_PROTO 0 /**/
-/* HAS_ISFINITE:
- * This symbol, if defined, indicates that the isfinite routine is
- * available to check whether a double is finite (non-infinity non-NaN).
+/* HAS_LONG_DOUBLE:
+ * This symbol will be defined if the C compiler supports long
+ * doubles.
*/
-/*#define HAS_ISFINITE / **/
-
-/* HAS_ISINF:
- * This symbol, if defined, indicates that the isinf routine is
- * available to check whether a double is an infinity.
+/* LONG_DOUBLESIZE:
+ * This symbol contains the size of a long double, so that the
+ * C preprocessor can make decisions based on it. It is only
+ * defined if the system supports long doubles.
*/
-/*#define HAS_ISINF / **/
+/*#define HAS_LONG_DOUBLE / **/
+#ifdef HAS_LONG_DOUBLE
+#define LONG_DOUBLESIZE 8 /**/
+#endif
-/* HAS_ISNAN:
- * This symbol, if defined, indicates that the isnan routine is
- * available to check whether a double is a NaN.
- */
-/*#define HAS_ISNAN / **/
-
-/* HAS_ISNANL:
- * This symbol, if defined, indicates that the isnanl routine is
- * available to check whether a long double is a NaN.
- */
-/*#define HAS_ISNANL / **/
-
-/* HAS_LCHOWN:
- * This symbol, if defined, indicates that the lchown routine is
- * available to operate on a symbolic link (instead of following the
- * link).
- */
-/*#define HAS_LCHOWN / **/
-
-/* HAS_LDBL_DIG:
- * This symbol, if defined, indicates that this system's <float.h>
- * or <limits.h> defines the symbol LDBL_DIG, which is the number
- * of significant digits in a long double precision number. Unlike
- * for DBL_DIG, there's no good guess for LDBL_DIG if it is undefined.
- */
-/*#define HAS_LDBL_DIG / * */
-
-/* LIBM_LIB_VERSION:
- * This symbol, if defined, indicates that libm exports _LIB_VERSION
- * and that math.h defines the enum to manipulate it.
- */
-/*#define LIBM_LIB_VERSION / **/
-
-/* HAS_LOCALTIME_R:
- * This symbol, if defined, indicates that the localtime_r routine
- * is available to localtime re-entrantly.
- */
-/* LOCALTIME_R_NEEDS_TZSET:
- * Many libc's localtime_r implementations do not call tzset,
- * making them differ from localtime(), and making timezone
- * changes using $ENV{TZ} without explicitly calling tzset
- * impossible. This symbol makes us call tzset before localtime_r
- */
-/* LOCALTIME_R_PROTO:
- * This symbol encodes the prototype of localtime_r.
- * It is zero if d_localtime_r is undef, and one of the
- * REENTRANT_PROTO_T_ABC macros of reentr.h if d_localtime_r
- * is defined.
- */
-/*#define HAS_LOCALTIME_R / **/
-/*#define LOCALTIME_R_NEEDS_TZSET / **/
-#define LOCALTIME_R_PROTO 0 /**/
-
-/* HAS_LONG_DOUBLE:
- * This symbol will be defined if the C compiler supports long
- * doubles.
- */
-/* LONG_DOUBLESIZE:
- * This symbol contains the size of a long double, so that the
- * C preprocessor can make decisions based on it. It is only
- * defined if the system supports long doubles.
- */
-/*#define HAS_LONG_DOUBLE / **/
-#ifdef HAS_LONG_DOUBLE
-#define LONG_DOUBLESIZE 8 /**/
-#endif
-
-/* HAS_LONG_LONG:
- * This symbol will be defined if the C compiler supports long long.
+/* HAS_LONG_LONG:
+ * This symbol will be defined if the C compiler supports long long.
*/
/* LONGLONGSIZE:
- * This symbol contains the size of a long long, so that the
+ * This symbol contains the size of a long long, so that the
* C preprocessor can make decisions based on it. It is only
* defined if the system supports long long.
*/
*/
/*#define HAS_LSEEK_PROTO / **/
-/* HAS_MADVISE:
- * This symbol, if defined, indicates that the madvise system call is
- * available to map a file into memory.
- */
-/*#define HAS_MADVISE / **/
-
-/* HAS_MALLOC_SIZE:
- * This symbol, if defined, indicates that the malloc_size
- * routine is available for use.
- */
-/*#define HAS_MALLOC_SIZE / **/
-
-/* HAS_MALLOC_GOOD_SIZE:
- * This symbol, if defined, indicates that the malloc_good_size
- * routine is available for use.
- */
-/*#define HAS_MALLOC_GOOD_SIZE / **/
-
/* HAS_MEMCHR:
* This symbol, if defined, indicates that the memchr routine is available
* to locate characters within a C string.
*/
#define HAS_MEMCHR /**/
-/* HAS_MKDTEMP:
- * This symbol, if defined, indicates that the mkdtemp routine is
- * available to exclusively create a uniquely named temporary directory.
- */
-/*#define HAS_MKDTEMP / **/
-
/* HAS_MKSTEMP:
* This symbol, if defined, indicates that the mkstemp routine is
* available to exclusively create and open a uniquely named
*/
/*#define HAS_MKSTEMP / **/
-/* HAS_MKSTEMPS:
- * This symbol, if defined, indicates that the mkstemps routine is
- * available to excluslvely create and open a uniquely named
- * (with a suffix) temporary file.
- */
-/*#define HAS_MKSTEMPS / **/
-
/* HAS_MMAP:
* This symbol, if defined, indicates that the mmap system call is
* available to map a file into memory.
/* Mmap_t:
* This symbol holds the return type of the mmap() system call
* (and simultaneously the type of the first argument).
- * Usually set to 'void *' or 'cadd_t'.
+ * Usually set to 'void *' or 'caddr_t'.
*/
/*#define HAS_MMAP / **/
-#define Mmap_t /**/
-
-/* HAS_MODFL:
- * This symbol, if defined, indicates that the modfl routine is
- * available to split a long double x into a fractional part f and
- * an integer part i such that |f| < 1.0 and (f + i) = x.
- */
-/* HAS_MODFL_PROTO:
- * This symbol, if defined, indicates that the system provides
- * a prototype for the modfl() function. Otherwise, it is up
- * to the program to supply one.
- */
-/* HAS_MODFL_POW32_BUG:
- * This symbol, if defined, indicates that the modfl routine is
- * broken for long doubles >= pow(2, 32).
- * For example from 4294967303.150000 one would get 4294967302.000000
- * and 1.150000. The bug has been seen in certain versions of glibc,
- * release 2.2.2 is known to be okay.
- */
-/*#define HAS_MODFL / **/
-/*#define HAS_MODFL_PROTO / **/
-/*#define HAS_MODFL_POW32_BUG / **/
-
-/* HAS_MPROTECT:
- * This symbol, if defined, indicates that the mprotect system call is
- * available to modify the access protection of a memory mapped file.
- */
-/*#define HAS_MPROTECT / **/
+#define Mmap_t void * /**/
/* HAS_MSG:
* This symbol, if defined, indicates that the entire msg*(2) library is
*/
/*#define HAS_MSG / **/
-/* HAS_STRUCT_MSGHDR:
- * This symbol, if defined, indicates that the struct msghdr
- * is supported.
- */
-/*#define HAS_STRUCT_MSGHDR / **/
-
-/* HAS_NL_LANGINFO:
- * This symbol, if defined, indicates that the nl_langinfo routine is
- * available to return local data. You will also need <langinfo.h>
- * and therefore I_LANGINFO.
- */
-/*#define HAS_NL_LANGINFO / **/
-
-/* HAS_OFF64_T:
- * This symbol will be defined if the C compiler supports off64_t.
- */
-/*#define HAS_OFF64_T / **/
-
-/* HAS_OPEN3:
- * This manifest constant lets the C program know that the three
- * argument form of open(2) is available.
- */
-/*#define HAS_OPEN3 / **/
-
-/* HAS_PROCSELFEXE:
- * This symbol is defined if PROCSELFEXE_PATH is a symlink
- * to the absolute pathname of the executing program.
- */
-/* PROCSELFEXE_PATH:
- * If HAS_PROCSELFEXE is defined this symbol is the filename
- * of the symbolic link pointing to the absolute pathname of
- * the executing program.
+/* HAS_POLL:
+ * This symbol, if defined, indicates that the poll routine is
+ * available to poll active file descriptors. You may safely
+ * include <poll.h> when both this symbol *and* I_POLL are defined.
*/
-/*#define HAS_PROCSELFEXE / **/
-#if defined(HAS_PROCSELFEXE) && !defined(PROCSELFEXE_PATH)
-#define PROCSELFEXE_PATH /**/
-#endif
+/*#define HAS_POLL / **/
/* OLD_PTHREAD_CREATE_JOINABLE:
* This symbol, if defined, indicates how to create pthread
*/
/*#define HAS_PTHREAD_ATFORK / **/
-/* HAS_PTHREAD_ATTR_SETSCOPE:
- * This symbol, if defined, indicates that the pthread_attr_setscope
- * system call is available to set the contention scope attribute of
- * a thread attribute object.
- */
-/*#define HAS_PTHREAD_ATTR_SETSCOPE / **/
-
/* HAS_PTHREAD_YIELD:
- * This symbol, if defined, indicates that the pthread_yield
+ * This symbol, if defined, indicates that the pthread_yield
* routine is available to yield the execution of the current
* thread. sched_yield is preferable to pthread_yield.
*/
/*#define HAS_READDIR_R / **/
#define READDIR_R_PROTO 0 /**/
-/* HAS_READV:
- * This symbol, if defined, indicates that the readv routine is
- * available to do gather reads. You will also need <sys/uio.h>
- * and there I_SYSUIO.
- */
-/*#define HAS_READV / **/
-
-/* HAS_RECVMSG:
- * This symbol, if defined, indicates that the recvmsg routine is
- * available to send structured socket messages.
- */
-/*#define HAS_RECVMSG / **/
-
-/* HAS_SAFE_BCOPY:
- * This symbol, if defined, indicates that the bcopy routine is available
- * to copy potentially overlapping memory blocks. Normally, you should
- * probably use memmove() or memcpy(). If neither is defined, roll your
- * own version.
- */
-/*#define HAS_SAFE_BCOPY / **/
-
-/* HAS_SAFE_MEMCPY:
- * This symbol, if defined, indicates that the memcpy routine is available
- * to copy potentially overlapping memory blocks. If you need to
- * copy overlapping memory blocks, you should check HAS_MEMMOVE and
- * use memmove() instead, if available.
- */
-/*#define HAS_SAFE_MEMCPY / **/
-
-/* HAS_SANE_MEMCMP:
- * This symbol, if defined, indicates that the memcmp routine is available
- * and can be used to compare relative magnitudes of chars with their high
- * bits set. If it is not defined, roll your own version.
- */
-/*#define HAS_SANE_MEMCMP / **/
-
-/* HAS_SBRK_PROTO:
- * This symbol, if defined, indicates that the system provides
- * a prototype for the sbrk() function. Otherwise, it is up
- * to the program to supply one. Good guesses are
- * extern void* sbrk(int);
- * extern void* sbrk(size_t);
- */
-/*#define HAS_SBRK_PROTO / **/
-
-/* HAS_SCALBNL:
- * This symbol, if defined, indicates that the scalbnl routine is
- * available. If ilogbl is also present we can emulate frexpl.
- */
-/*#define HAS_SCALBNL / **/
-
/* HAS_SEM:
* This symbol, if defined, indicates that the entire sem*(2) library is
* supported.
*/
/*#define HAS_SEM / **/
-/* HAS_SENDMSG:
- * This symbol, if defined, indicates that the sendmsg routine is
- * available to send structured socket messages.
- */
-/*#define HAS_SENDMSG / **/
-
/* HAS_SETGRENT:
* This symbol, if defined, indicates that the setgrent routine is
* available for initializing sequential access of the group database.
/*#define HAS_SETHOSTENT_R / **/
#define SETHOSTENT_R_PROTO 0 /**/
-/* HAS_SETITIMER:
- * This symbol, if defined, indicates that the setitimer routine is
- * available to set interval timers.
- */
-/*#define HAS_SETITIMER / **/
-
/* HAS_SETLOCALE_R:
* This symbol, if defined, indicates that the setlocale_r routine
* is available to setlocale re-entrantly.
/*#define HAS_SETPGRP / **/
/*#define USE_BSD_SETPGRP / **/
-/* HAS_SETPROCTITLE:
- * This symbol, if defined, indicates that the setproctitle routine is
- * available to set process title.
- */
-/*#define HAS_SETPROCTITLE / **/
-
/* HAS_SETPROTOENT_R:
* This symbol, if defined, indicates that the setprotoent_r routine
* is available to setprotoent re-entrantly.
*/
/*#define HAS_SETVBUF / **/
-/* USE_SFIO:
- * This symbol, if defined, indicates that sfio should
- * be used.
- */
-/*#define USE_SFIO / **/
-
/* HAS_SHM:
* This symbol, if defined, indicates that the entire shm*(2) library is
* supported.
#define Shmat_t void * /**/
/*#define HAS_SHMAT_PROTOTYPE / **/
-/* HAS_SIGACTION:
- * This symbol, if defined, indicates that Vr4's sigaction() routine
- * is available.
- */
-/*#define HAS_SIGACTION / **/
-
-/* HAS_SIGPROCMASK:
- * This symbol, if defined, indicates that the sigprocmask
- * system call is available to examine or change the signal mask
- * of the calling process.
- */
-/*#define HAS_SIGPROCMASK / **/
-
-/* HAS_SIGSETJMP:
- * This variable indicates to the C program that the sigsetjmp()
- * routine is available to save the calling process's registers
- * and stack environment for later use by siglongjmp(), and
- * to optionally save the process's signal mask. See
- * Sigjmp_buf, Sigsetjmp, and Siglongjmp.
- */
-/* Sigjmp_buf:
- * This is the buffer type to be used with Sigsetjmp and Siglongjmp.
- */
-/* Sigsetjmp:
- * This macro is used in the same way as sigsetjmp(), but will invoke
- * traditional setjmp() if sigsetjmp isn't available.
- * See HAS_SIGSETJMP.
- */
-/* Siglongjmp:
- * This macro is used in the same way as siglongjmp(), but will invoke
- * traditional longjmp() if siglongjmp isn't available.
- * See HAS_SIGSETJMP.
- */
-/*#define HAS_SIGSETJMP / **/
-#ifdef HAS_SIGSETJMP
-#define Sigjmp_buf sigjmp_buf
-#define Sigsetjmp(buf,save_mask) sigsetjmp((buf),(save_mask))
-#define Siglongjmp(buf,retval) siglongjmp((buf),(retval))
-#else
-#define Sigjmp_buf jmp_buf
-#define Sigsetjmp(buf,save_mask) setjmp((buf))
-#define Siglongjmp(buf,retval) longjmp((buf),(retval))
-#endif
-
-/* USE_SITECUSTOMIZE:
- * This symbol, if defined, indicates that sitecustomize should
- * be used.
- */
-#ifndef USE_SITECUSTOMIZE
-/*#define USE_SITECUSTOMIZE / **/
-#endif
-
-/* HAS_SNPRINTF:
- * This symbol, if defined, indicates that the snprintf () library
- * function is available for use.
- */
-/* HAS_VSNPRINTF:
- * This symbol, if defined, indicates that the vsnprintf () library
- * function is available for use.
- */
-/*#define HAS_SNPRINTF / **/
-/*#define HAS_VSNPRINTF / **/
-
-/* HAS_SOCKATMARK:
- * This symbol, if defined, indicates that the sockatmark routine is
- * available to test whether a socket is at the out-of-band mark.
- */
-/*#define HAS_SOCKATMARK / **/
-
-/* HAS_SOCKATMARK_PROTO:
- * This symbol, if defined, indicates that the system provides
- * a prototype for the sockatmark() function. Otherwise, it is up
- * to the program to supply one. A good guess is
- * extern int sockatmark(int);
- */
-/*#define HAS_SOCKATMARK_PROTO / **/
-
-/* HAS_SOCKET:
- * This symbol, if defined, indicates that the BSD socket interface is
- * supported.
+/* HAS_SOCKET:
+ * This symbol, if defined, indicates that the BSD socket interface is
+ * supported.
*/
/* HAS_SOCKETPAIR:
* This symbol, if defined, indicates that the BSD socketpair() call is
/*#define HAS_MSG_PROXY / **/
/*#define HAS_SCM_RIGHTS / **/
-/* HAS_SOCKS5_INIT:
- * This symbol, if defined, indicates that the socks5_init routine is
- * available to initialize SOCKS 5.
- */
-/*#define HAS_SOCKS5_INIT / **/
-
-/* SPRINTF_RETURNS_STRLEN:
- * This variable defines whether sprintf returns the length of the string
- * (as per the ANSI spec). Some C libraries retain compatibility with
- * pre-ANSI C and return a pointer to the passed in buffer; for these
- * this variable will be undef.
- */
-/*#define SPRINTF_RETURNS_STRLEN / **/
-
-/* HAS_SQRTL:
- * This symbol, if defined, indicates that the sqrtl routine is
- * available to do long double square roots.
- */
-/*#define HAS_SQRTL / **/
-
/* HAS_SRAND48_R:
* This symbol, if defined, indicates that the srand48_r routine
* is available to srand48 re-entrantly.
/*#define HAS_SRANDOM_R / **/
#define SRANDOM_R_PROTO 0 /**/
-/* HAS_SETRESGID_PROTO:
- * This symbol, if defined, indicates that the system provides
- * a prototype for the setresgid() function. Otherwise, it is up
- * to the program to supply one. Good guesses are
- * extern int setresgid(uid_t ruid, uid_t euid, uid_t suid);
- */
-/*#define HAS_SETRESGID_PROTO / **/
-
-/* HAS_SETRESUID_PROTO:
- * This symbol, if defined, indicates that the system provides
- * a prototype for the setresuid() function. Otherwise, it is up
- * to the program to supply one. Good guesses are
- * extern int setresuid(uid_t ruid, uid_t euid, uid_t suid);
- */
-/*#define HAS_SETRESUID_PROTO / **/
-
/* USE_STAT_BLOCKS:
* This symbol is defined if this system has a stat structure declaring
* st_blksize and st_blocks.
/*#define USE_STAT_BLOCKS / **/
#endif
-/* HAS_STRUCT_STATFS_F_FLAGS:
- * This symbol, if defined, indicates that the struct statfs
- * does have the f_flags member containing the mount flags of
- * the filesystem containing the file.
- * This kind of struct statfs is coming from <sys/mount.h> (BSD 4.3),
- * not from <sys/statfs.h> (SYSV). Older BSDs (like Ultrix) do not
- * have statfs() and struct statfs, they have ustat() and getmnt()
- * with struct ustat and struct fs_data.
- */
-/*#define HAS_STRUCT_STATFS_F_FLAGS / **/
-
-/* HAS_STRUCT_STATFS:
- * This symbol, if defined, indicates that the struct statfs
- * to do statfs() is supported.
- */
-/*#define HAS_STRUCT_STATFS / **/
-
-/* HAS_FSTATVFS:
- * This symbol, if defined, indicates that the fstatvfs routine is
- * available to stat filesystems by file descriptors.
- */
-/*#define HAS_FSTATVFS / **/
-
-/* USE_STDIO_PTR:
- * This symbol is defined if the _ptr and _cnt fields (or similar)
- * of the stdio FILE structure can be used to access the stdio buffer
- * for a file handle. If this is defined, then the FILE_ptr(fp)
- * and FILE_cnt(fp) macros will also be defined and should be used
- * to access these fields.
- */
-/* FILE_ptr:
- * This macro is used to access the _ptr field (or equivalent) of the
- * FILE structure pointed to by its argument. This macro will always be
- * defined if USE_STDIO_PTR is defined.
- */
-/* STDIO_PTR_LVALUE:
- * This symbol is defined if the FILE_ptr macro can be used as an
- * lvalue.
- */
-/* FILE_cnt:
- * This macro is used to access the _cnt field (or equivalent) of the
- * FILE structure pointed to by its argument. This macro will always be
- * defined if USE_STDIO_PTR is defined.
- */
-/* STDIO_CNT_LVALUE:
- * This symbol is defined if the FILE_cnt macro can be used as an
- * lvalue.
- */
-/* STDIO_PTR_LVAL_SETS_CNT:
- * This symbol is defined if using the FILE_ptr macro as an lvalue
- * to increase the pointer by n has the side effect of decreasing the
- * value of File_cnt(fp) by n.
- */
-/* STDIO_PTR_LVAL_NOCHANGE_CNT:
- * This symbol is defined if using the FILE_ptr macro as an lvalue
- * to increase the pointer by n leaves File_cnt(fp) unchanged.
- */
-/*#define USE_STDIO_PTR / **/
-#ifdef USE_STDIO_PTR
-#define FILE_ptr(fp) ((fp)->_IO_read_ptr)
-/*#define STDIO_PTR_LVALUE / **/
-#define FILE_cnt(fp) ((fp)->_IO_read_end - (fp)->_IO_read_ptr)
-/*#define STDIO_CNT_LVALUE / **/
-/*#define STDIO_PTR_LVAL_SETS_CNT / **/
-/*#define STDIO_PTR_LVAL_NOCHANGE_CNT / **/
-#endif
-
-/* USE_STDIO_BASE:
- * This symbol is defined if the _base field (or similar) of the
- * stdio FILE structure can be used to access the stdio buffer for
- * a file handle. If this is defined, then the FILE_base(fp) macro
- * will also be defined and should be used to access this field.
- * Also, the FILE_bufsiz(fp) macro will be defined and should be used
- * to determine the number of bytes in the buffer. USE_STDIO_BASE
- * will never be defined unless USE_STDIO_PTR is.
- */
-/* FILE_base:
- * This macro is used to access the _base field (or equivalent) of the
- * FILE structure pointed to by its argument. This macro will always be
- * defined if USE_STDIO_BASE is defined.
- */
-/* FILE_bufsiz:
- * This macro is used to determine the number of bytes in the I/O
- * buffer pointed to by _base field (or equivalent) of the FILE
- * structure pointed to its argument. This macro will always be defined
- * if USE_STDIO_BASE is defined.
+/* USE_STRUCT_COPY:
+ * This symbol, if defined, indicates that this C compiler knows how
+ * to copy structures. If undefined, you'll need to use a block copy
+ * routine of some sort instead.
*/
-/*#define USE_STDIO_BASE / **/
-#ifdef USE_STDIO_BASE
-#define FILE_base(fp) ((fp)->_IO_read_base)
-#define FILE_bufsiz(fp) ((fp)->_IO_read_end - (fp)->_IO_read_base)
-#endif
+/*#define USE_STRUCT_COPY / **/
/* HAS_STRERROR:
* This symbol, if defined, indicates that the strerror routine is
/*#define HAS_STRERROR_R / **/
#define STRERROR_R_PROTO 0 /**/
-/* HAS_STRFTIME:
- * This symbol, if defined, indicates that the strftime routine is
- * available to do time formatting.
+/* HAS_STRTOUL:
+ * This symbol, if defined, indicates that the strtoul routine is
+ * available to provide conversion of strings to unsigned long.
*/
-/*#define HAS_STRFTIME / **/
+#define HAS_STRTOUL /**/
-/* HAS_STRLCAT:
- * This symbol, if defined, indicates that the strlcat () routine is
- * available to do string concatenation.
+/* HAS_TIME:
+ * This symbol, if defined, indicates that the time() routine exists.
*/
-/*#define HAS_STRLCAT / **/
-
-/* HAS_STRLCPY:
- * This symbol, if defined, indicates that the strlcpy () routine is
- * available to do string copying.
+/* Time_t:
+ * This symbol holds the type returned by time(). It can be long,
+ * or time_t on BSD sites (in which case <sys/types.h> should be
+ * included).
*/
-/*#define HAS_STRLCPY / **/
+#define HAS_TIME /**/
+#define Time_t time_t /* Time type */
-/* HAS_STRTOLD:
- * This symbol, if defined, indicates that the strtold routine is
- * available to convert strings to long doubles.
+/* HAS_TIMES:
+ * This symbol, if defined, indicates that the times() routine exists.
+ * Note that this became obsolete on some systems (SUNOS), which now
+ * use getrusage(). It may be necessary to include <sys/times.h>.
*/
-/*#define HAS_STRTOLD / **/
+/*#define HAS_TIMES / **/
-/* HAS_STRTOLL:
- * This symbol, if defined, indicates that the strtoll routine is
- * available to convert strings to long longs.
+/* HAS_TMPNAM_R:
+ * This symbol, if defined, indicates that the tmpnam_r routine
+ * is available to tmpnam re-entrantly.
*/
-/*#define HAS_STRTOLL / **/
-
-/* HAS_STRTOQ:
- * This symbol, if defined, indicates that the strtoq routine is
- * available to convert strings to long longs (quads).
+/* TMPNAM_R_PROTO:
+ * This symbol encodes the prototype of tmpnam_r.
+ * It is zero if d_tmpnam_r is undef, and one of the
+ * REENTRANT_PROTO_T_ABC macros of reentr.h if d_tmpnam_r
+ * is defined.
*/
-/*#define HAS_STRTOQ / **/
-
-/* HAS_STRTOUL:
- * This symbol, if defined, indicates that the strtoul routine is
- * available to provide conversion of strings to unsigned long.
- */
-#define HAS_STRTOUL /**/
-
-/* HAS_STRTOULL:
- * This symbol, if defined, indicates that the strtoull routine is
- * available to convert strings to unsigned long longs.
- */
-/*#define HAS_STRTOULL / **/
-
-/* HAS_STRTOUQ:
- * This symbol, if defined, indicates that the strtouq routine is
- * available to convert strings to unsigned long longs (quads).
- */
-/*#define HAS_STRTOUQ / **/
-
-/* HAS_SYSCALL_PROTO:
- * This symbol, if defined, indicates that the system provides
- * a prototype for the syscall() function. Otherwise, it is up
- * to the program to supply one. Good guesses are
- * extern int syscall(int, ...);
- * extern int syscall(long, ...);
- */
-/*#define HAS_SYSCALL_PROTO / **/
-
-/* HAS_TELLDIR_PROTO:
- * This symbol, if defined, indicates that the system provides
- * a prototype for the telldir() function. Otherwise, it is up
- * to the program to supply one. A good guess is
- * extern long telldir(DIR*);
- */
-/*#define HAS_TELLDIR_PROTO / **/
-
-/* HAS_TIME:
- * This symbol, if defined, indicates that the time() routine exists.
- */
-/* Time_t:
- * This symbol holds the type returned by time(). It can be long,
- * or time_t on BSD sites (in which case <sys/types.h> should be
- * included).
- */
-#define HAS_TIME /**/
-#define Time_t time_t /* Time type */
-
-/* HAS_TIMES:
- * This symbol, if defined, indicates that the times() routine exists.
- * Note that this became obsolete on some systems (SUNOS), which now
- * use getrusage(). It may be necessary to include <sys/times.h>.
- */
-/*#define HAS_TIMES / **/
-
-/* HAS_TMPNAM_R:
- * This symbol, if defined, indicates that the tmpnam_r routine
- * is available to tmpnam re-entrantly.
- */
-/* TMPNAM_R_PROTO:
- * This symbol encodes the prototype of tmpnam_r.
- * It is zero if d_tmpnam_r is undef, and one of the
- * REENTRANT_PROTO_T_ABC macros of reentr.h if d_tmpnam_r
- * is defined.
- */
-/*#define HAS_TMPNAM_R / **/
-#define TMPNAM_R_PROTO 0 /**/
+/*#define HAS_TMPNAM_R / **/
+#define TMPNAM_R_PROTO 0 /**/
/* HAS_TTYNAME_R:
* This symbol, if defined, indicates that the ttyname_r routine
/*#define HAS_TTYNAME_R / **/
#define TTYNAME_R_PROTO 0 /**/
-/* U32_ALIGNMENT_REQUIRED:
- * This symbol, if defined, indicates that you must access
- * character data through U32-aligned pointers.
- */
-#ifndef U32_ALIGNMENT_REQUIRED
-#define U32_ALIGNMENT_REQUIRED /**/
-#endif
-
-/* HAS_UALARM:
- * This symbol, if defined, indicates that the ualarm routine is
- * available to do alarms with microsecond granularity.
- */
-/*#define HAS_UALARM / **/
-
/* HAS_UNION_SEMUN:
* This symbol, if defined, indicates that the union semun is
* defined by including <sys/sem.h>. If not, the user code
/*#define USE_SEMCTL_SEMUN / **/
/*#define USE_SEMCTL_SEMID_DS / **/
-/* HAS_UNORDERED:
- * This symbol, if defined, indicates that the unordered routine is
- * available to check whether two doubles are unordered
- * (effectively: whether either of them is NaN)
- */
-/*#define HAS_UNORDERED / **/
-
-/* HAS_UNSETENV:
- * This symbol, if defined, indicates that the unsetenv () routine is
- * available for use.
- */
-/*#define HAS_UNSETENV / **/
-
-/* HAS_USLEEP_PROTO:
- * This symbol, if defined, indicates that the system provides
- * a prototype for the usleep() function. Otherwise, it is up
- * to the program to supply one. A good guess is
- * extern int usleep(useconds_t);
- */
-/*#define HAS_USLEEP_PROTO / **/
-
-/* HAS_USTAT:
- * This symbol, if defined, indicates that the ustat system call is
- * available to query file system statistics by dev_t.
- */
-/*#define HAS_USTAT / **/
-
/* HAS_VFORK:
* This symbol, if defined, indicates that vfork() exists.
*/
/*#define HAS_VFORK / **/
+/* HAS_PSEUDOFORK:
+ * This symbol, if defined, indicates that an emulation of the
+ * fork routine is available.
+ */
+/*#define HAS_PSEUDOFORK / **/
+
/* Signal_t:
* This symbol's value is either "void" or "int", corresponding to the
* appropriate return type of a signal handler. Thus, you can declare
*/
#define Signal_t int /* Signal handler's return type */
-/* HAS_VPRINTF:
- * This symbol, if defined, indicates that the vprintf routine is available
- * to printf with a pointer to an argument list. If unavailable, you
- * may need to write your own, probably in terms of _doprnt().
- */
-/* USE_CHAR_VSPRINTF:
- * This symbol is defined if this system has vsprintf() returning type
- * (char*). The trend seems to be to declare it as "int vsprintf()". It
- * is up to the package author to declare vsprintf correctly based on the
- * symbol.
- */
-#define HAS_VPRINTF /**/
-/*#define USE_CHAR_VSPRINTF / **/
-
-/* HAS_WRITEV:
- * This symbol, if defined, indicates that the writev routine is
- * available to do scatter writes.
- */
-/*#define HAS_WRITEV / **/
-
-/* USE_DYNAMIC_LOADING:
- * This symbol, if defined, indicates that dynamic loading of
- * some sort is available.
- */
-/*#define USE_DYNAMIC_LOADING / **/
-
-/* DOUBLESIZE:
- * This symbol contains the size of a double, so that the C preprocessor
- * can make decisions based on it.
- */
-#define DOUBLESIZE 8 /**/
-
-/* EBCDIC:
- * This symbol, if defined, indicates that this system uses
- * EBCDIC encoding.
- */
-/*#define EBCDIC / **/
-
-/* FFLUSH_NULL:
- * This symbol, if defined, tells that fflush(NULL) does flush
- * all pending stdio output.
- */
-/* FFLUSH_ALL:
- * This symbol, if defined, tells that to flush
- * all pending stdio output one must loop through all
- * the stdio file handles stored in an array and fflush them.
- * Note that if fflushNULL is defined, fflushall will not
- * even be probed for and will be left undefined.
+/* HASVOLATILE:
+ * This symbol, if defined, indicates that this C compiler knows about
+ * the volatile declaration.
*/
-/*#define FFLUSH_NULL / **/
-/*#define FFLUSH_ALL / **/
+/*#define HASVOLATILE / **/
+#ifndef HASVOLATILE
+#define volatile
+#endif
/* Fpos_t:
* This symbol holds the type used to declare file positions in libc.
* This symbol holds the type used for the second argument to
* getgroups() and setgroups(). Usually, this is the same as
* gidtype (gid_t) , but sometimes it isn't.
- * It can be int, ushort, gid_t, etc...
- * It may be necessary to include <sys/types.h> to get any
+ * It can be int, ushort, gid_t, etc...
+ * It may be necessary to include <sys/types.h> to get any
* typedef'ed information. This is only required if you have
* getgroups() or setgroups()..
*/
#define Groups_t int /* Type for 2nd arg to [sg]etgroups() */
#endif
-/* I_CRYPT:
- * This symbol, if defined, indicates that <crypt.h> exists and
- * should be included.
- */
-/*#define I_CRYPT / **/
-
-/* DB_Prefix_t:
- * This symbol contains the type of the prefix structure element
- * in the <db.h> header file. In older versions of DB, it was
- * int, while in newer ones it is u_int32_t.
- */
-/* DB_Hash_t:
- * This symbol contains the type of the prefix structure element
- * in the <db.h> header file. In older versions of DB, it was
- * int, while in newer ones it is size_t.
- */
-/* DB_VERSION_MAJOR_CFG:
- * This symbol, if defined, defines the major version number of
- * Berkeley DB found in the <db.h> header when Perl was configured.
- */
-/* DB_VERSION_MINOR_CFG:
- * This symbol, if defined, defines the minor version number of
- * Berkeley DB found in the <db.h> header when Perl was configured.
- * For DB version 1 this is always 0.
- */
-/* DB_VERSION_PATCH_CFG:
- * This symbol, if defined, defines the patch version number of
- * Berkeley DB found in the <db.h> header when Perl was configured.
- * For DB version 1 this is always 0.
+/* I_DIRENT:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <dirent.h>. Using this symbol also triggers the definition
+ * of the Direntry_t define which ends up being 'struct dirent' or
+ * 'struct direct' depending on the availability of <dirent.h>.
*/
-#define DB_Hash_t u_int32_t /**/
-#define DB_Prefix_t size_t /**/
-#define DB_VERSION_MAJOR_CFG /**/
-#define DB_VERSION_MINOR_CFG /**/
-#define DB_VERSION_PATCH_CFG /**/
-
-/* I_FP:
- * This symbol, if defined, indicates that <fp.h> exists and
- * should be included.
+/* DIRNAMLEN:
+ * This symbol, if defined, indicates to the C program that the length
+ * of directory entry names is provided by a d_namlen field. Otherwise
+ * you need to do strlen() on the d_name field.
*/
-/*#define I_FP / **/
-
-/* I_FP_CLASS:
- * This symbol, if defined, indicates that <fp_class.h> exists and
- * should be included.
+/* Direntry_t:
+ * This symbol is set to 'struct direct' or 'struct dirent' depending on
+ * whether dirent is available or not. You should use this pseudo type to
+ * portably declare your directory entries.
*/
-/*#define I_FP_CLASS / **/
+#define I_DIRENT /**/
+/*#define DIRNAMLEN / **/
+#define Direntry_t struct dirent
/* I_GRP:
* This symbol, if defined, indicates to the C program that it should
/*#define I_GRP / **/
/*#define GRPASSWD / **/
-/* I_IEEEFP:
- * This symbol, if defined, indicates that <ieeefp.h> exists and
- * should be included.
- */
-/*#define I_IEEEFP / **/
-
-/* I_INTTYPES:
- * This symbol, if defined, indicates to the C program that it should
- * include <inttypes.h>.
- */
-/*#define I_INTTYPES / **/
-
-/* I_LANGINFO:
- * This symbol, if defined, indicates that <langinfo.h> exists and
- * should be included.
- */
-/*#define I_LANGINFO / **/
-
-/* I_LIBUTIL:
- * This symbol, if defined, indicates that <libutil.h> exists and
- * should be included.
- */
-/*#define I_LIBUTIL / **/
-
/* I_MACH_CTHREADS:
* This symbol, if defined, indicates to the C program that it should
* include <mach/cthreads.h>.
*/
/*#define I_MACH_CTHREADS / **/
-/* I_MNTENT:
- * This symbol, if defined, indicates that <mntent.h> exists and
- * should be included.
- */
-/*#define I_MNTENT / **/
-
/* I_NDBM:
* This symbol, if defined, indicates that <ndbm.h> exists and should
* be included.
*/
/*#define I_NETDB / **/
-/* I_NETINET_TCP:
- * This symbol, if defined, indicates to the C program that it should
- * include <netinet/tcp.h>.
+/* I_NET_ERRNO:
+ * This symbol, if defined, indicates that <net/errno.h> exists and
+ * should be included.
*/
-/*#define I_NETINET_TCP / **/
-
-/* I_POLL:
- * This symbol, if defined, indicates that <poll.h> exists and
- * should be included. (see also HAS_POLL)
- */
-/*#define I_POLL / **/
-
-/* I_PROT:
- * This symbol, if defined, indicates that <prot.h> exists and
- * should be included.
- */
-/*#define I_PROT / **/
+/*#define I_NET_ERRNO / **/
/* I_PTHREAD:
* This symbol, if defined, indicates to the C program that it should
/*#define PWGECOS / **/
/*#define PWPASSWD / **/
-/* I_SHADOW:
- * This symbol, if defined, indicates that <shadow.h> exists and
- * should be included.
- */
-/*#define I_SHADOW / **/
-
-/* I_SOCKS:
- * This symbol, if defined, indicates that <socks.h> exists and
- * should be included.
- */
-/*#define I_SOCKS / **/
-
-/* I_SUNMATH:
- * This symbol, if defined, indicates that <sunmath.h> exists and
- * should be included.
- */
-/*#define I_SUNMATH / **/
-
-/* I_SYSLOG:
- * This symbol, if defined, indicates that <syslog.h> exists and
- * should be included.
- */
-/*#define I_SYSLOG / **/
-
-/* I_SYSMODE:
- * This symbol, if defined, indicates that <sys/mode.h> exists and
- * should be included.
- */
-/*#define I_SYSMODE / **/
-
-/* I_SYS_MOUNT:
- * This symbol, if defined, indicates that <sys/mount.h> exists and
- * should be included.
- */
-/*#define I_SYS_MOUNT / **/
-
-/* I_SYS_STATFS:
- * This symbol, if defined, indicates that <sys/statfs.h> exists.
+/* I_SYS_ACCESS:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <sys/access.h>.
*/
-/*#define I_SYS_STATFS / **/
+/*#define I_SYS_ACCESS / **/
-/* I_SYS_STATVFS:
- * This symbol, if defined, indicates that <sys/statvfs.h> exists and
- * should be included.
+/* I_SYS_SECURITY:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <sys/security.h>.
*/
-/*#define I_SYS_STATVFS / **/
+/*#define I_SYS_SECURITY / **/
/* I_SYSUIO:
* This symbol, if defined, indicates that <sys/uio.h> exists and
*/
/*#define I_SYSUIO / **/
-/* I_SYSUTSNAME:
- * This symbol, if defined, indicates that <sys/utsname.h> exists and
- * should be included.
- */
-/*#define I_SYSUTSNAME / **/
-
-/* I_SYS_VFS:
- * This symbol, if defined, indicates that <sys/vfs.h> exists and
- * should be included.
- */
-/*#define I_SYS_VFS / **/
-
-/* I_TIME:
- * This symbol, if defined, indicates to the C program that it should
- * include <time.h>.
- */
-/* I_SYS_TIME:
- * This symbol, if defined, indicates to the C program that it should
- * include <sys/time.h>.
- */
-/* I_SYS_TIME_KERNEL:
- * This symbol, if defined, indicates to the C program that it should
- * include <sys/time.h> with KERNEL defined.
- */
-/* HAS_TM_TM_ZONE:
- * This symbol, if defined, indicates to the C program that
- * the struct tm has a tm_zone field.
- */
-/* HAS_TM_TM_GMTOFF:
- * This symbol, if defined, indicates to the C program that
- * the struct tm has a tm_gmtoff field.
- */
-#define I_TIME /**/
-/*#define I_SYS_TIME / **/
-/*#define I_SYS_TIME_KERNEL / **/
-/*#define HAS_TM_TM_ZONE / **/
-/*#define HAS_TM_TM_GMTOFF / **/
-
-/* I_USTAT:
- * This symbol, if defined, indicates that <ustat.h> exists and
- * should be included.
- */
-/*#define I_USTAT / **/
-
/* I_STDARG:
* This symbol, if defined, indicates that <stdarg.h> exists and should
* be included.
*/
/*#define INSTALL_USR_BIN_PERL / **/
-/* PERL_PRIfldbl:
- * This symbol, if defined, contains the string used by stdio to
- * format long doubles (format 'f') for output.
- */
-/* PERL_PRIgldbl:
- * This symbol, if defined, contains the string used by stdio to
- * format long doubles (format 'g') for output.
- */
-/* PERL_PRIeldbl:
- * This symbol, if defined, contains the string used by stdio to
- * format long doubles (format 'e') for output.
- */
-/* PERL_SCNfldbl:
- * This symbol, if defined, contains the string used by stdio to
- * format long doubles (format 'f') for input.
- */
-/*#define PERL_PRIfldbl "llf" / **/
-/*#define PERL_PRIgldbl "llg" / **/
-/*#define PERL_PRIeldbl "lle" / **/
-/*#define PERL_SCNfldbl "llf" / **/
-
/* Off_t:
* This symbol holds the type used to declare offsets in the kernel.
* It can be int, long, off_t, etc... It may be necessary to include
#define LSEEKSIZE 4 /* <offset> size */
#define Off_t_size 4 /* <offset> size */
-/* PERL_MAD:
- * This symbol, if defined, indicates that the Misc Attribution
- * Declaration code should be conditionally compiled.
- */
-/*#define PERL_MAD / **/
-
/* Free_t:
* This variable contains the return type of free(). It is usually
* void, but occasionally int.
/*#define MYMALLOC / **/
/* Mode_t:
- * This symbol holds the type used to declare file modes
+ * This symbol holds the type used to declare file modes
* for systems calls. It is usually mode_t, but may be
* int or unsigned short. It may be necessary to include <sys/types.h>
* to get any typedef'ed information.
*/
#define Mode_t int /* file mode parameter for system calls */
-/* VAL_O_NONBLOCK:
- * This symbol is to be used during open() or fcntl(F_SETFL) to turn on
- * non-blocking I/O for the file descriptor. Note that there is no way
- * back, i.e. you cannot turn it blocking again this way. If you wish to
- * alternatively switch between blocking and non-blocking, use the
- * ioctl(FIOSNBIO) call instead, but that is not supported by all devices.
- */
-/* VAL_EAGAIN:
- * This symbol holds the errno error code set by read() when no data was
- * present on the non-blocking file descriptor.
- */
-/* RD_NODATA:
- * This symbol holds the return code from read() when no data is present
- * on the non-blocking file descriptor. Be careful! If EOF_NONBLOCK is
- * not defined, then you can't distinguish between no data and EOF by
- * issuing a read(). You'll have to find another way to tell for sure!
- */
-/* EOF_NONBLOCK:
- * This symbol, if defined, indicates to the C program that a read() on
- * a non-blocking file descriptor will return 0 on EOF, and not the value
- * held in RD_NODATA (-1 usually, in that case!).
- */
-#define VAL_O_NONBLOCK O_NONBLOCK
-#define VAL_EAGAIN EAGAIN
-#define RD_NODATA -1
-#undef EOF_NONBLOCK
-
-/* NEED_VA_COPY:
- * This symbol, if defined, indicates that the system stores
- * the variable argument list datatype, va_list, in a format
- * that cannot be copied by simple assignment, so that some
- * other means must be used when copying is required.
- * As such systems vary in their provision (or non-provision)
- * of copying mechanisms, handy.h defines a platform-
- * independent macro, Perl_va_copy(src, dst), to do the job.
- */
-/*#define NEED_VA_COPY / **/
-
/* Netdb_host_t:
* This symbol holds the type used for the 1st argument
* to gethostbyaddr().
* and architecture-specific directories. See PERL_INC_VERSION_LIST
* for more details.
*/
-/*#define PERL_OTHERLIBDIRS "" / **/
+/*#define PERL_OTHERLIBDIRS " " / **/
-/* HAS_QUAD:
- * This symbol, if defined, tells that there's a 64-bit integer type,
- * Quad_t, and its unsigned counterpar, Uquad_t. QUADKIND will be one
- * of QUAD_IS_INT, QUAD_IS_LONG, QUAD_IS_LONG_LONG, or QUAD_IS_INT64_T.
+/* Pid_t:
+ * This symbol holds the type used to declare process ids in the kernel.
+ * It can be int, uint, pid_t, etc... It may be necessary to include
+ * <sys/types.h> to get any typedef'ed information.
*/
-/*#define HAS_QUAD / **/
-#ifdef HAS_QUAD
-# define Quad_t int64_t /**/
-# define Uquad_t uint64_t /**/
-# define QUADKIND 4 /**/
-# define QUAD_IS_INT 1
-# define QUAD_IS_LONG 2
-# define QUAD_IS_LONG_LONG 3
-# define QUAD_IS_INT64_T 4
-#endif
+#define Pid_t int /* PID type */
-/* IVTYPE:
- * This symbol defines the C type used for Perl's IV.
- */
-/* UVTYPE:
- * This symbol defines the C type used for Perl's UV.
- */
-/* I8TYPE:
- * This symbol defines the C type used for Perl's I8.
- */
-/* U8TYPE:
- * This symbol defines the C type used for Perl's U8.
- */
-/* I16TYPE:
- * This symbol defines the C type used for Perl's I16.
+/* PRIVLIB:
+ * This symbol contains the name of the private library for this package.
+ * The library is private in the sense that it needn't be in anyone's
+ * execution path, but it should be accessible by the world. The program
+ * should be prepared to do ~ expansion.
*/
-/* U16TYPE:
- * This symbol defines the C type used for Perl's U16.
+/* PRIVLIB_EXP:
+ * This symbol contains the ~name expanded version of PRIVLIB, to be used
+ * in programs that are not prepared to deal with ~ expansion at run-time.
*/
-/* I32TYPE:
- * This symbol defines the C type used for Perl's I32.
+#define PRIVLIB "/usr/local/lib/perl5/5.11" /**/
+#define PRIVLIB_EXP "/usr/local/lib/perl5/5.11" /**/
+
+/* CAN_PROTOTYPE:
+ * If defined, this macro indicates that the C compiler can handle
+ * function prototypes.
*/
-/* U32TYPE:
- * This symbol defines the C type used for Perl's U32.
+/* _:
+ * This macro is used to declare function parameters for folks who want
+ * to make declarations with prototypes using a different style than
+ * the above macros. Use double parentheses. For example:
+ *
+ * int main _((int argc, char *argv[]));
*/
-/* I64TYPE:
- * This symbol defines the C type used for Perl's I64.
+/*#define CAN_PROTOTYPE / **/
+#ifdef CAN_PROTOTYPE
+#define _(args) args
+#else
+#define _(args) ()
+#endif
+
+/* Select_fd_set_t:
+ * This symbol holds the type used for the 2nd, 3rd, and 4th
+ * arguments to select. Usually, this is 'fd_set *', if HAS_FD_SET
+ * is defined, and 'int *' otherwise. This is only useful if you
+ * have select(), of course.
*/
-/* U64TYPE:
- * This symbol defines the C type used for Perl's U64.
+#define Select_fd_set_t int /**/
+
+/* SH_PATH:
+ * This symbol contains the full pathname to the shell used on this
+ * on this system to execute Bourne shell scripts. Usually, this will be
+ * /bin/sh, though it's possible that some systems will have /bin/ksh,
+ * /bin/pdksh, /bin/ash, /bin/bash, or even something such as
+ * D:/bin/sh.exe.
*/
-/* NVTYPE:
- * This symbol defines the C type used for Perl's NV.
- */
-/* IVSIZE:
- * This symbol contains the sizeof(IV).
- */
-/* UVSIZE:
- * This symbol contains the sizeof(UV).
- */
-/* I8SIZE:
- * This symbol contains the sizeof(I8).
- */
-/* U8SIZE:
- * This symbol contains the sizeof(U8).
- */
-/* I16SIZE:
- * This symbol contains the sizeof(I16).
- */
-/* U16SIZE:
- * This symbol contains the sizeof(U16).
- */
-/* I32SIZE:
- * This symbol contains the sizeof(I32).
- */
-/* U32SIZE:
- * This symbol contains the sizeof(U32).
- */
-/* I64SIZE:
- * This symbol contains the sizeof(I64).
- */
-/* U64SIZE:
- * This symbol contains the sizeof(U64).
- */
-/* NVSIZE:
- * This symbol contains the sizeof(NV).
- */
-/* NV_PRESERVES_UV:
- * This symbol, if defined, indicates that a variable of type NVTYPE
- * can preserve all the bits of a variable of type UVTYPE.
- */
-/* NV_PRESERVES_UV_BITS:
- * This symbol contains the number of bits a variable of type NVTYPE
- * can preserve of a variable of type UVTYPE.
- */
-/* NV_ZERO_IS_ALLBITS_ZERO:
- * This symbol, if defined, indicates that a variable of type NVTYPE
- * stores 0.0 in memory as all bits zero.
- */
-#define IVTYPE long /**/
-#define UVTYPE unsigned long /**/
-#define I8TYPE char /**/
-#define U8TYPE unsigned char /**/
-#define I16TYPE short /**/
-#define U16TYPE unsigned short /**/
-#define I32TYPE long /**/
-#define U32TYPE unsigned long /**/
-#ifdef HAS_QUAD
-#define I64TYPE int64_t /**/
-#define U64TYPE uint64_t /**/
-#endif
-#define NVTYPE double /**/
-#define IVSIZE 4 /**/
-#define UVSIZE 4 /**/
-#define I8SIZE 1 /**/
-#define U8SIZE 1 /**/
-#define I16SIZE 2 /**/
-#define U16SIZE 2 /**/
-#define I32SIZE 4 /**/
-#define U32SIZE 4 /**/
-#ifdef HAS_QUAD
-#define I64SIZE 8 /**/
-#define U64SIZE 8 /**/
-#endif
-#define NVSIZE 8 /**/
-#undef NV_PRESERVES_UV
-#define NV_PRESERVES_UV_BITS 0
-#undef NV_ZERO_IS_ALLBITS_ZERO
-#if UVSIZE == 8
-# ifdef BYTEORDER
-# if BYTEORDER == 0x1234
-# undef BYTEORDER
-# define BYTEORDER 0x12345678
-# else
-# if BYTEORDER == 0x4321
-# undef BYTEORDER
-# define BYTEORDER 0x87654321
-# endif
-# endif
-# endif
-#endif
-
-/* IVdf:
- * This symbol defines the format string used for printing a Perl IV
- * as a signed decimal integer.
- */
-/* UVuf:
- * This symbol defines the format string used for printing a Perl UV
- * as an unsigned decimal integer.
- */
-/* UVof:
- * This symbol defines the format string used for printing a Perl UV
- * as an unsigned octal integer.
- */
-/* UVxf:
- * This symbol defines the format string used for printing a Perl UV
- * as an unsigned hexadecimal integer in lowercase abcdef.
- */
-/* UVXf:
- * This symbol defines the format string used for printing a Perl UV
- * as an unsigned hexadecimal integer in uppercase ABCDEF.
- */
-/* NVef:
- * This symbol defines the format string used for printing a Perl NV
- * using %e-ish floating point format.
- */
-/* NVff:
- * This symbol defines the format string used for printing a Perl NV
- * using %f-ish floating point format.
- */
-/* NVgf:
- * This symbol defines the format string used for printing a Perl NV
- * using %g-ish floating point format.
- */
-#define IVdf "ld" /**/
-#define UVuf "lu" /**/
-#define UVof "lo" /**/
-#define UVxf "lx" /**/
-#define UVXf "lX" /**/
-#define NVef "e" /**/
-#define NVff "f" /**/
-#define NVgf "g" /**/
-
-/* Pid_t:
- * This symbol holds the type used to declare process ids in the kernel.
- * It can be int, uint, pid_t, etc... It may be necessary to include
- * <sys/types.h> to get any typedef'ed information.
- */
-#define Pid_t int /* PID type */
-
-/* PRIVLIB:
- * This symbol contains the name of the private library for this package.
- * The library is private in the sense that it needn't be in anyone's
- * execution path, but it should be accessible by the world. The program
- * should be prepared to do ~ expansion.
- */
-/* PRIVLIB_EXP:
- * This symbol contains the ~name expanded version of PRIVLIB, to be used
- * in programs that are not prepared to deal with ~ expansion at run-time.
- */
-#define PRIVLIB "/usr/local/lib/perl5/5.9" /**/
-#define PRIVLIB_EXP "/usr/local/lib/perl5/5.9" /**/
-
-/* CAN_PROTOTYPE:
- * If defined, this macro indicates that the C compiler can handle
- * function prototypes.
- */
-/* _:
- * This macro is used to declare function parameters for folks who want
- * to make declarations with prototypes using a different style than
- * the above macros. Use double parentheses. For example:
- *
- * int main _((int argc, char *argv[]));
- */
-/*#define CAN_PROTOTYPE / **/
-#ifdef CAN_PROTOTYPE
-#define _(args) args
-#else
-#define _(args) ()
-#endif
-
-/* PTRSIZE:
- * This symbol contains the size of a pointer, so that the C preprocessor
- * can make decisions based on it. It will be sizeof(void *) if
- * the compiler supports (void *); otherwise it will be
- * sizeof(char *).
- */
-#define PTRSIZE 4 /**/
-
-/* Drand01:
- * This macro is to be used to generate uniformly distributed
- * random numbers over the range [0., 1.[. You may have to supply
- * an 'extern double drand48();' in your program since SunOS 4.1.3
- * doesn't provide you with anything relevant in its headers.
- * See HAS_DRAND48_PROTO.
- */
-/* Rand_seed_t:
- * This symbol defines the type of the argument of the
- * random seed function.
- */
-/* seedDrand01:
- * This symbol defines the macro to be used in seeding the
- * random number generator (see Drand01).
- */
-/* RANDBITS:
- * This symbol indicates how many bits are produced by the
- * function used to generate normalized random numbers.
- * Values include 15, 16, 31, and 48.
- */
-#define Drand01() ((rand() & 0x7FFF) / (double) ((unsigned long)1 << 15)) /**/
-#define Rand_seed_t int /**/
-#define seedDrand01(x) srand((Rand_seed_t)x) /**/
-#define RANDBITS 48 /**/
-
-/* SELECT_MIN_BITS:
- * This symbol holds the minimum number of bits operated by select.
- * That is, if you do select(n, ...), how many bits at least will be
- * cleared in the masks if some activity is detected. Usually this
- * is either n or 32*ceil(n/32), especially many little-endians do
- * the latter. This is only useful if you have select(), naturally.
- */
-#define SELECT_MIN_BITS 32 /**/
-
-/* Select_fd_set_t:
- * This symbol holds the type used for the 2nd, 3rd, and 4th
- * arguments to select. Usually, this is 'fd_set *', if HAS_FD_SET
- * is defined, and 'int *' otherwise. This is only useful if you
- * have select(), of course.
- */
-#define Select_fd_set_t int /**/
-
-/* SH_PATH:
- * This symbol contains the full pathname to the shell used on this
- * on this system to execute Bourne shell scripts. Usually, this will be
- * /bin/sh, though it's possible that some systems will have /bin/ksh,
- * /bin/pdksh, /bin/ash, /bin/bash, or even something such as
- * D:/bin/sh.exe.
- */
-#define SH_PATH "" /**/
+#define SH_PATH "/bin/sh" /**/
/* SIG_NAME:
* This symbol contains a list of signal names in order of
* The signals in the list are separated with commas, and the indices
* within that list and the SIG_NAME list match, so it's easy to compute
* the signal name from a number or vice versa at the price of a small
- * dynamic linear lookup.
+ * dynamic linear lookup.
* Duplicates are allowed, but are moved to the end of the list.
* The signal number corresponding to sig_name[i] is sig_number[i].
- * if (i < NSIG) then sig_number[i] == i.
+ * if (i < NSIG) then sig_number[i] == i.
* The last element is 0, corresponding to the 0 at the end of
* the sig_name_init list.
* Note that this variable is initialized from the sig_num_init,
* This symbol contains the ~name expanded version of SITEARCH, to be used
* in programs that are not prepared to deal with ~ expansion at run-time.
*/
-/*#define SITEARCH "" / **/
-/*#define SITEARCH_EXP "" / **/
+/*#define SITEARCH "/usr/local/lib/perl5/5.11/unknown" / **/
+/*#define SITEARCH_EXP "/usr/local/lib/perl5/5.11/unknown" / **/
/* SITELIB:
* This symbol contains the name of the private library for this package.
* removed. The elements in inc_version_list (inc_version_list.U) can
* be tacked onto this variable to generate a list of directories to search.
*/
-#define SITELIB "" /**/
-#define SITELIB_EXP "" /**/
-#define SITELIB_STEM "" /**/
+#define SITELIB "/usr/local/lib/perl5/5.11" /**/
+#define SITELIB_EXP "/usr/local/lib/perl5/5.11" /**/
+#define SITELIB_STEM "/usr/local/lib/perl5" /**/
/* Size_t_size:
* This symbol holds the size of a Size_t in bytes.
*/
#define Sock_size_t int /**/
-/* SSize_t:
- * This symbol holds the type used by functions that return
- * a count of bytes or an error condition. It must be a signed type.
- * It is usually ssize_t, but may be long or int, etc.
- * It may be necessary to include <sys/types.h> or <unistd.h>
- * to get any typedef'ed information.
- * We will pick a type such that sizeof(SSize_t) == sizeof(Size_t).
- */
-#define SSize_t int /* signed count of bytes */
-
-/* STARTPERL:
- * This variable contains the string to put in front of a perl
- * script to make sure (one hopes) that it runs with perl and not
- * some shell.
- */
-#define STARTPERL "" /**/
-
/* STDCHAR:
* This symbol is defined to be the type of char used in stdio.h.
* It has the values "unsigned char" or "char".
*/
#define STDCHAR char /**/
-/* HAS_STDIO_STREAM_ARRAY:
- * This symbol, if defined, tells that there is an array
- * holding the stdio streams.
- */
-/* STDIO_STREAM_ARRAY:
- * This symbol tells the name of the array holding the stdio streams.
- * Usual values include _iob, __iob, and __sF.
- */
-/*#define HAS_STDIO_STREAM_ARRAY / **/
-#define STDIO_STREAM_ARRAY
-
/* Uid_t_f:
* This symbol defines the format string used for printing a Uid_t.
*/
*/
#define Uid_t int /* UID type */
-/* USE_64_BIT_INT:
- * This symbol, if defined, indicates that 64-bit integers should
- * be used when available. If not defined, the native integers
- * will be employed (be they 32 or 64 bits). The minimal possible
- * 64-bitness is used, just enough to get 64-bit integers into Perl.
- * This may mean using for example "long longs", while your memory
- * may still be limited to 2 gigabytes.
- */
-/* USE_64_BIT_ALL:
- * This symbol, if defined, indicates that 64-bit integers should
- * be used when available. If not defined, the native integers
- * will be used (be they 32 or 64 bits). The maximal possible
- * 64-bitness is employed: LP64 or ILP64, meaning that you will
- * be able to use more than 2 gigabytes of memory. This mode is
- * even more binary incompatible than USE_64_BIT_INT. You may not
- * be able to run the resulting executable in a 32-bit CPU at all or
- * you may need at least to reboot your OS to 64-bit mode.
- */
-#ifndef USE_64_BIT_INT
-/*#define USE_64_BIT_INT / **/
-#endif
-
-#ifndef USE_64_BIT_ALL
-/*#define USE_64_BIT_ALL / **/
-#endif
-
-/* USE_FAST_STDIO:
- * This symbol, if defined, indicates that Perl should
- * be built to use 'fast stdio'.
- * Defaults to define in Perls 5.8 and earlier, to undef later.
- */
-#ifndef USE_FAST_STDIO
-/*#define USE_FAST_STDIO / **/
-#endif
-
-/* USE_LARGE_FILES:
- * This symbol, if defined, indicates that large file support
- * should be used when available.
- */
-#ifndef USE_LARGE_FILES
-/*#define USE_LARGE_FILES / **/
-#endif
-
-/* USE_LONG_DOUBLE:
- * This symbol, if defined, indicates that long doubles should
- * be used when available.
- */
-#ifndef USE_LONG_DOUBLE
-/*#define USE_LONG_DOUBLE / **/
-#endif
-
-/* USE_MORE_BITS:
- * This symbol, if defined, indicates that 64-bit interfaces and
- * long doubles should be used when available.
- */
-#ifndef USE_MORE_BITS
-/*#define USE_MORE_BITS / **/
-#endif
-
-/* MULTIPLICITY:
- * This symbol, if defined, indicates that Perl should
- * be built to use multiplicity.
- */
-#ifndef MULTIPLICITY
-/*#define MULTIPLICITY / **/
-#endif
-
-/* USE_PERLIO:
- * This symbol, if defined, indicates that the PerlIO abstraction should
- * be used throughout. If not defined, stdio should be
- * used in a fully backward compatible manner.
- */
-#ifndef USE_PERLIO
-/*#define USE_PERLIO / **/
-#endif
-
-/* USE_SOCKS:
- * This symbol, if defined, indicates that Perl should
- * be built to use socks.
- */
-#ifndef USE_SOCKS
-/*#define USE_SOCKS / **/
-#endif
-
/* USE_ITHREADS:
* This symbol, if defined, indicates that Perl should be built to
* use the interpreter-based threading implementation.
/* USE_5005THREADS:
* This symbol, if defined, indicates that Perl should be built to
* use the 5.005-based threading implementation.
+ * Only valid up to 5.8.x.
*/
/* OLD_PTHREADS_API:
* This symbol, if defined, indicates that Perl should
#define M_VOID /* Xenix strikes again */
#endif
-/* HAS_POLL:
- * This symbol, if defined, indicates that the poll routine is
- * available to poll active file descriptors. You may safely
- * include <poll.h> when both this symbol *and* I_POLL are defined.
+/* USE_CROSS_COMPILE:
+ * This symbol, if defined, indicates that Perl is being cross-compiled.
*/
-/*#define HAS_POLL / **/
+/* PERL_TARGETARCH:
+ * This symbol, if defined, indicates the target architecture
+ * Perl has been cross-compiled to. Undefined if not a cross-compile.
+ */
+#ifndef USE_CROSS_COMPILE
+/*#define USE_CROSS_COMPILE / **/
+#define PERL_TARGETARCH "" /**/
+#endif
+
+/* MEM_ALIGNBYTES:
+ * This symbol contains the number of bytes required to align a
+ * double, or a long double when applicable. Usual values are 2,
+ * 4 and 8. The default is eight, for safety.
+ */
+#if defined(USE_CROSS_COMPILE) || defined(MULTIARCH)
+# define MEM_ALIGNBYTES 8
+#else
+#define MEM_ALIGNBYTES 4
+#endif
+
+/* BYTEORDER:
+ * This symbol holds the hexadecimal constant defined in byteorder,
+ * in a UV, i.e. 0x1234 or 0x4321 or 0x12345678, etc...
+ * If the compiler supports cross-compiling or multiple-architecture
+ * binaries (eg. on NeXT systems), use compiler-defined macros to
+ * determine the byte order.
+ * On NeXT 3.2 (and greater), you can build "Fat" Multiple Architecture
+ * Binaries (MAB) on either big endian or little endian machines.
+ * The endian-ness is available at compile-time. This only matters
+ * for perl, where the config.h can be generated and installed on
+ * one system, and used by a different architecture to build an
+ * extension. Older versions of NeXT that might not have
+ * defined either *_ENDIAN__ were all on Motorola 680x0 series,
+ * so the default case (for NeXT) is big endian to catch them.
+ * This might matter for NeXT 3.0.
+ */
+#if defined(USE_CROSS_COMPILE) || defined(MULTIARCH)
+# ifdef __LITTLE_ENDIAN__
+# if LONGSIZE == 4
+# define BYTEORDER 0x1234
+# else
+# if LONGSIZE == 8
+# define BYTEORDER 0x12345678
+# endif
+# endif
+# else
+# ifdef __BIG_ENDIAN__
+# if LONGSIZE == 4
+# define BYTEORDER 0x4321
+# else
+# if LONGSIZE == 8
+# define BYTEORDER 0x87654321
+# endif
+# endif
+# endif
+# endif
+# if !defined(BYTEORDER) && (defined(NeXT) || defined(__NeXT__))
+# define BYTEORDER 0x4321
+# endif
+#else
+#define BYTEORDER 0x1234 /* large digits for MSB */
+#endif /* NeXT */
+
+/* CASTI32:
+ * This symbol is defined if the C compiler can cast negative
+ * or large floating point numbers to 32-bit ints.
+ */
+/*#define CASTI32 / **/
+
+/* CASTNEGFLOAT:
+ * This symbol is defined if the C compiler can cast negative
+ * numbers to unsigned longs, ints and shorts.
+ */
+/* CASTFLAGS:
+ * This symbol contains flags that say what difficulties the compiler
+ * has casting odd floating values to unsigned long:
+ * 0 = ok
+ * 1 = couldn't cast < 0
+ * 2 = couldn't cast >= 0x80000000
+ * 4 = couldn't cast in argument expression list
+ */
+/*#define CASTNEGFLOAT / **/
+#define CASTFLAGS 0 /**/
+
+/* VOID_CLOSEDIR:
+ * This symbol, if defined, indicates that the closedir() routine
+ * does not return a value.
+ */
+/*#define VOID_CLOSEDIR / **/
+
+/* HAS_FD_SET:
+ * This symbol, when defined, indicates presence of the fd_set typedef
+ * in <sys/types.h>
+ */
+/*#define HAS_FD_SET / **/
+
+/* Gconvert:
+ * This preprocessor macro is defined to convert a floating point
+ * number to a string without a trailing decimal point. This
+ * emulates the behavior of sprintf("%g"), but is sometimes much more
+ * efficient. If gconvert() is not available, but gcvt() drops the
+ * trailing decimal point, then gcvt() is used. If all else fails,
+ * a macro using sprintf("%g") is used. Arguments for the Gconvert
+ * macro are: value, number of digits, whether trailing zeros should
+ * be retained, and the output buffer.
+ * The usual values are:
+ * d_Gconvert='gconvert((x),(n),(t),(b))'
+ * d_Gconvert='gcvt((x),(n),(b))'
+ * d_Gconvert='sprintf((b),"%.*g",(n),(x))'
+ * The last two assume trailing zeros should not be kept.
+ */
+#define Gconvert(x,n,t,b) sprintf((b),"%.*g",(n),(x))
+
+/* HAS_GETPAGESIZE:
+ * This symbol, if defined, indicates that the getpagesize system call
+ * is available to get system page size, which is the granularity of
+ * many memory management calls.
+ */
+/*#define HAS_GETPAGESIZE / **/
+
+/* HAS_GNULIBC:
+ * This symbol, if defined, indicates to the C program that
+ * the GNU C library is being used. A better check is to use
+ * the __GLIBC__ and __GLIBC_MINOR__ symbols supplied with glibc.
+ */
+/*#define HAS_GNULIBC / **/
+#if defined(HAS_GNULIBC) && !defined(_GNU_SOURCE)
+# define _GNU_SOURCE
+#endif
+/* HAS_ISASCII:
+ * This manifest constant lets the C program know that isascii
+ * is available.
+ */
+/*#define HAS_ISASCII / **/
+
+/* HAS_LCHOWN:
+ * This symbol, if defined, indicates that the lchown routine is
+ * available to operate on a symbolic link (instead of following the
+ * link).
+ */
+/*#define HAS_LCHOWN / **/
+
+/* HAS_OPEN3:
+ * This manifest constant lets the C program know that the three
+ * argument form of open(2) is available.
+ */
+/*#define HAS_OPEN3 / **/
+
+/* HAS_SAFE_BCOPY:
+ * This symbol, if defined, indicates that the bcopy routine is available
+ * to copy potentially overlapping memory blocks. Normally, you should
+ * probably use memmove() or memcpy(). If neither is defined, roll your
+ * own version.
+ */
+/*#define HAS_SAFE_BCOPY / **/
+
+/* HAS_SAFE_MEMCPY:
+ * This symbol, if defined, indicates that the memcpy routine is available
+ * to copy potentially overlapping memory blocks. If you need to
+ * copy overlapping memory blocks, you should check HAS_MEMMOVE and
+ * use memmove() instead, if available.
+ */
+/*#define HAS_SAFE_MEMCPY / **/
+
+/* HAS_SANE_MEMCMP:
+ * This symbol, if defined, indicates that the memcmp routine is available
+ * and can be used to compare relative magnitudes of chars with their high
+ * bits set. If it is not defined, roll your own version.
+ */
+/*#define HAS_SANE_MEMCMP / **/
+
+/* HAS_SIGACTION:
+ * This symbol, if defined, indicates that Vr4's sigaction() routine
+ * is available.
+ */
+/*#define HAS_SIGACTION / **/
+
+/* HAS_SIGSETJMP:
+ * This variable indicates to the C program that the sigsetjmp()
+ * routine is available to save the calling process's registers
+ * and stack environment for later use by siglongjmp(), and
+ * to optionally save the process's signal mask. See
+ * Sigjmp_buf, Sigsetjmp, and Siglongjmp.
+ */
+/* Sigjmp_buf:
+ * This is the buffer type to be used with Sigsetjmp and Siglongjmp.
+ */
+/* Sigsetjmp:
+ * This macro is used in the same way as sigsetjmp(), but will invoke
+ * traditional setjmp() if sigsetjmp isn't available.
+ * See HAS_SIGSETJMP.
+ */
+/* Siglongjmp:
+ * This macro is used in the same way as siglongjmp(), but will invoke
+ * traditional longjmp() if siglongjmp isn't available.
+ * See HAS_SIGSETJMP.
+ */
+/*#define HAS_SIGSETJMP / **/
+#ifdef HAS_SIGSETJMP
+#define Sigjmp_buf sigjmp_buf
+#define Sigsetjmp(buf,save_mask) sigsetjmp((buf),(save_mask))
+#define Siglongjmp(buf,retval) siglongjmp((buf),(retval))
+#else
+#define Sigjmp_buf jmp_buf
+#define Sigsetjmp(buf,save_mask) setjmp((buf))
+#define Siglongjmp(buf,retval) longjmp((buf),(retval))
+#endif
+
+/* USE_STDIO_PTR:
+ * This symbol is defined if the _ptr and _cnt fields (or similar)
+ * of the stdio FILE structure can be used to access the stdio buffer
+ * for a file handle. If this is defined, then the FILE_ptr(fp)
+ * and FILE_cnt(fp) macros will also be defined and should be used
+ * to access these fields.
+ */
+/* FILE_ptr:
+ * This macro is used to access the _ptr field (or equivalent) of the
+ * FILE structure pointed to by its argument. This macro will always be
+ * defined if USE_STDIO_PTR is defined.
+ */
+/* STDIO_PTR_LVALUE:
+ * This symbol is defined if the FILE_ptr macro can be used as an
+ * lvalue.
+ */
+/* FILE_cnt:
+ * This macro is used to access the _cnt field (or equivalent) of the
+ * FILE structure pointed to by its argument. This macro will always be
+ * defined if USE_STDIO_PTR is defined.
+ */
+/* STDIO_CNT_LVALUE:
+ * This symbol is defined if the FILE_cnt macro can be used as an
+ * lvalue.
+ */
+/* STDIO_PTR_LVAL_SETS_CNT:
+ * This symbol is defined if using the FILE_ptr macro as an lvalue
+ * to increase the pointer by n has the side effect of decreasing the
+ * value of File_cnt(fp) by n.
+ */
+/* STDIO_PTR_LVAL_NOCHANGE_CNT:
+ * This symbol is defined if using the FILE_ptr macro as an lvalue
+ * to increase the pointer by n leaves File_cnt(fp) unchanged.
+ */
+/*#define USE_STDIO_PTR / **/
+#ifdef USE_STDIO_PTR
+#define FILE_ptr(fp) ((fp)->_IO_read_ptr)
+/*#define STDIO_PTR_LVALUE / **/
+#define FILE_cnt(fp) ((fp)->_IO_read_end - (fp)->_IO_read_ptr)
+/*#define STDIO_CNT_LVALUE / **/
+/*#define STDIO_PTR_LVAL_SETS_CNT / **/
+/*#define STDIO_PTR_LVAL_NOCHANGE_CNT / **/
+#endif
+
+/* USE_STDIO_BASE:
+ * This symbol is defined if the _base field (or similar) of the
+ * stdio FILE structure can be used to access the stdio buffer for
+ * a file handle. If this is defined, then the FILE_base(fp) macro
+ * will also be defined and should be used to access this field.
+ * Also, the FILE_bufsiz(fp) macro will be defined and should be used
+ * to determine the number of bytes in the buffer. USE_STDIO_BASE
+ * will never be defined unless USE_STDIO_PTR is.
+ */
+/* FILE_base:
+ * This macro is used to access the _base field (or equivalent) of the
+ * FILE structure pointed to by its argument. This macro will always be
+ * defined if USE_STDIO_BASE is defined.
+ */
+/* FILE_bufsiz:
+ * This macro is used to determine the number of bytes in the I/O
+ * buffer pointed to by _base field (or equivalent) of the FILE
+ * structure pointed to its argument. This macro will always be defined
+ * if USE_STDIO_BASE is defined.
+ */
+/*#define USE_STDIO_BASE / **/
+#ifdef USE_STDIO_BASE
+#define FILE_base(fp) ((fp)->_IO_read_base)
+#define FILE_bufsiz(fp) ((fp)->_IO_read_end - (fp)->_IO_read_base)
+#endif
+
+/* HAS_VPRINTF:
+ * This symbol, if defined, indicates that the vprintf routine is available
+ * to printf with a pointer to an argument list. If unavailable, you
+ * may need to write your own, probably in terms of _doprnt().
+ */
+/* USE_CHAR_VSPRINTF:
+ * This symbol is defined if this system has vsprintf() returning type
+ * (char*). The trend seems to be to declare it as "int vsprintf()". It
+ * is up to the package author to declare vsprintf correctly based on the
+ * symbol.
+ */
+#define HAS_VPRINTF /**/
+/*#define USE_CHAR_VSPRINTF / **/
+
+/* DOUBLESIZE:
+ * This symbol contains the size of a double, so that the C preprocessor
+ * can make decisions based on it.
+ */
+#define DOUBLESIZE 8 /**/
+
+/* I_TIME:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <time.h>.
+ */
+/* I_SYS_TIME:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <sys/time.h>.
+ */
+/* I_SYS_TIME_KERNEL:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <sys/time.h> with KERNEL defined.
+ */
+/* HAS_TM_TM_ZONE:
+ * This symbol, if defined, indicates to the C program that
+ * the struct tm has a tm_zone field.
+ */
+/* HAS_TM_TM_GMTOFF:
+ * This symbol, if defined, indicates to the C program that
+ * the struct tm has a tm_gmtoff field.
+ */
+#define I_TIME /**/
+/*#define I_SYS_TIME / **/
+/*#define I_SYS_TIME_KERNEL / **/
+/*#define HAS_TM_TM_ZONE / **/
+/*#define HAS_TM_TM_GMTOFF / **/
+
+/* VAL_O_NONBLOCK:
+ * This symbol is to be used during open() or fcntl(F_SETFL) to turn on
+ * non-blocking I/O for the file descriptor. Note that there is no way
+ * back, i.e. you cannot turn it blocking again this way. If you wish to
+ * alternatively switch between blocking and non-blocking, use the
+ * ioctl(FIOSNBIO) call instead, but that is not supported by all devices.
+ */
+/* VAL_EAGAIN:
+ * This symbol holds the errno error code set by read() when no data was
+ * present on the non-blocking file descriptor.
+ */
+/* RD_NODATA:
+ * This symbol holds the return code from read() when no data is present
+ * on the non-blocking file descriptor. Be careful! If EOF_NONBLOCK is
+ * not defined, then you can't distinguish between no data and EOF by
+ * issuing a read(). You'll have to find another way to tell for sure!
+ */
+/* EOF_NONBLOCK:
+ * This symbol, if defined, indicates to the C program that a read() on
+ * a non-blocking file descriptor will return 0 on EOF, and not the value
+ * held in RD_NODATA (-1 usually, in that case!).
+ */
+#define VAL_O_NONBLOCK O_NONBLOCK
+#define VAL_EAGAIN EAGAIN
+#define RD_NODATA -1
+#undef EOF_NONBLOCK
+
+/* PTRSIZE:
+ * This symbol contains the size of a pointer, so that the C preprocessor
+ * can make decisions based on it. It will be sizeof(void *) if
+ * the compiler supports (void *); otherwise it will be
+ * sizeof(char *).
+ */
+#define PTRSIZE 4 /**/
+
+/* Drand01:
+ * This macro is to be used to generate uniformly distributed
+ * random numbers over the range [0., 1.[. You may have to supply
+ * an 'extern double drand48();' in your program since SunOS 4.1.3
+ * doesn't provide you with anything relevant in its headers.
+ * See HAS_DRAND48_PROTO.
+ */
+/* Rand_seed_t:
+ * This symbol defines the type of the argument of the
+ * random seed function.
+ */
+/* seedDrand01:
+ * This symbol defines the macro to be used in seeding the
+ * random number generator (see Drand01).
+ */
+/* RANDBITS:
+ * This symbol indicates how many bits are produced by the
+ * function used to generate normalized random numbers.
+ * Values include 15, 16, 31, and 48.
+ */
+#define Drand01() ((rand() & 0x7FFF) / (double) ((unsigned long)1 << 15)) /**/
+#define Rand_seed_t int /**/
+#define seedDrand01(x) srand((Rand_seed_t)x) /**/
+#define RANDBITS 48 /**/
+
+/* SSize_t:
+ * This symbol holds the type used by functions that return
+ * a count of bytes or an error condition. It must be a signed type.
+ * It is usually ssize_t, but may be long or int, etc.
+ * It may be necessary to include <sys/types.h> or <unistd.h>
+ * to get any typedef'ed information.
+ * We will pick a type such that sizeof(SSize_t) == sizeof(Size_t).
+ */
+#define SSize_t int /* signed count of bytes */
+
+/* EBCDIC:
+ * This symbol, if defined, indicates that this system uses
+ * EBCDIC encoding.
+ */
+/*#define EBCDIC / **/
+
+/* HAS_ATOLF:
+ * This symbol, if defined, indicates that the atolf routine is
+ * available to convert strings into long doubles.
+ */
+/*#define HAS_ATOLF / **/
+
+/* HAS_ATOLL:
+ * This symbol, if defined, indicates that the atoll routine is
+ * available to convert strings into long longs.
+ */
+/*#define HAS_ATOLL / **/
+
+/* HAS__FWALK:
+ * This symbol, if defined, indicates that the _fwalk system call is
+ * available to apply a function to all the file handles.
+ */
+/*#define HAS__FWALK / **/
+
+/* HAS_AINTL:
+ * This symbol, if defined, indicates that the aintl routine is
+ * available. If copysignl is also present we can emulate modfl.
+ */
+/*#define HAS_AINTL / **/
+
+/* HAS_BUILTIN_CHOOSE_EXPR:
+ * Can we handle GCC builtin for compile-time ternary-like expressions
+ */
+/* HAS_BUILTIN_EXPECT:
+ * Can we handle GCC builtin for telling that certain values are more
+ * likely
+ */
+/*#define HAS_BUILTIN_EXPECT / **/
+/*#define HAS_BUILTIN_CHOOSE_EXPR / **/
+
+/* HAS_C99_VARIADIC_MACROS:
+ * If defined, the compiler supports C99 variadic macros.
+ */
+/*#define HAS_C99_VARIADIC_MACROS / **/
+
+/* HAS_CLASS:
+ * This symbol, if defined, indicates that the class routine is
+ * available to classify doubles. Available for example in AIX.
+ * The returned values are defined in <float.h> and are:
+ *
+ * FP_PLUS_NORM Positive normalized, nonzero
+ * FP_MINUS_NORM Negative normalized, nonzero
+ * FP_PLUS_DENORM Positive denormalized, nonzero
+ * FP_MINUS_DENORM Negative denormalized, nonzero
+ * FP_PLUS_ZERO +0.0
+ * FP_MINUS_ZERO -0.0
+ * FP_PLUS_INF +INF
+ * FP_MINUS_INF -INF
+ * FP_NANS Signaling Not a Number (NaNS)
+ * FP_NANQ Quiet Not a Number (NaNQ)
+ */
+/*#define HAS_CLASS / **/
+
+/* HAS_CLEARENV:
+ * This symbol, if defined, indicates that the clearenv () routine is
+ * available for use.
+ */
+/*#define HAS_CLEARENV / **/
+
+/* HAS_STRUCT_CMSGHDR:
+ * This symbol, if defined, indicates that the struct cmsghdr
+ * is supported.
+ */
+/*#define HAS_STRUCT_CMSGHDR / **/
+
+/* HAS_COPYSIGNL:
+ * This symbol, if defined, indicates that the copysignl routine is
+ * available. If aintl is also present we can emulate modfl.
+ */
+/*#define HAS_COPYSIGNL / **/
+
+/* USE_CPLUSPLUS:
+ * This symbol, if defined, indicates that a C++ compiler was
+ * used to compiled Perl and will be used to compile extensions.
+ */
+/*#define USE_CPLUSPLUS / **/
+
+/* HAS_DBMINIT_PROTO:
+ * This symbol, if defined, indicates that the system provides
+ * a prototype for the dbminit() function. Otherwise, it is up
+ * to the program to supply one. A good guess is
+ * extern int dbminit(char *);
+ */
+/*#define HAS_DBMINIT_PROTO / **/
+
+/* HAS_DIR_DD_FD:
+ * This symbol, if defined, indicates that the the DIR* dirstream
+ * structure contains a member variable named dd_fd.
+ */
+/*#define HAS_DIR_DD_FD / **/
+
+/* HAS_DIRFD:
+ * This manifest constant lets the C program know that dirfd
+ * is available.
+ */
+/*#define HAS_DIRFD / **/
+
+/* DLSYM_NEEDS_UNDERSCORE:
+ * This symbol, if defined, indicates that we need to prepend an
+ * underscore to the symbol name before calling dlsym(). This only
+ * makes sense if you *have* dlsym, which we will presume is the
+ * case if you're using dl_dlopen.xs.
+ */
+/*#define DLSYM_NEEDS_UNDERSCORE / **/
+
+/* HAS_FAST_STDIO:
+ * This symbol, if defined, indicates that the "fast stdio"
+ * is available to manipulate the stdio buffers directly.
+ */
+/*#define HAS_FAST_STDIO / **/
+
+/* HAS_FCHDIR:
+ * This symbol, if defined, indicates that the fchdir routine is
+ * available to change directory using a file descriptor.
+ */
+/*#define HAS_FCHDIR / **/
+
+/* FCNTL_CAN_LOCK:
+ * This symbol, if defined, indicates that fcntl() can be used
+ * for file locking. Normally on Unix systems this is defined.
+ * It may be undefined on VMS.
+ */
+/*#define FCNTL_CAN_LOCK / **/
+
+/* HAS_FINITE:
+ * This symbol, if defined, indicates that the finite routine is
+ * available to check whether a double is finite (non-infinity non-NaN).
+ */
+/*#define HAS_FINITE / **/
+
+/* HAS_FINITEL:
+ * This symbol, if defined, indicates that the finitel routine is
+ * available to check whether a long double is finite
+ * (non-infinity non-NaN).
+ */
+/*#define HAS_FINITEL / **/
+
+/* HAS_FLOCK_PROTO:
+ * This symbol, if defined, indicates that the system provides
+ * a prototype for the flock() function. Otherwise, it is up
+ * to the program to supply one. A good guess is
+ * extern int flock(int, int);
+ */
+/*#define HAS_FLOCK_PROTO / **/
+
+/* HAS_FP_CLASS:
+ * This symbol, if defined, indicates that the fp_class routine is
+ * available to classify doubles. Available for example in Digital UNIX.
+ * The returned values are defined in <math.h> and are:
+ *
+ * FP_SNAN Signaling NaN (Not-a-Number)
+ * FP_QNAN Quiet NaN (Not-a-Number)
+ * FP_POS_INF +infinity
+ * FP_NEG_INF -infinity
+ * FP_POS_NORM Positive normalized
+ * FP_NEG_NORM Negative normalized
+ * FP_POS_DENORM Positive denormalized
+ * FP_NEG_DENORM Negative denormalized
+ * FP_POS_ZERO +0.0 (positive zero)
+ * FP_NEG_ZERO -0.0 (negative zero)
+ */
+/*#define HAS_FP_CLASS / **/
+
+/* HAS_FPCLASS:
+ * This symbol, if defined, indicates that the fpclass routine is
+ * available to classify doubles. Available for example in Solaris/SVR4.
+ * The returned values are defined in <ieeefp.h> and are:
+ *
+ * FP_SNAN signaling NaN
+ * FP_QNAN quiet NaN
+ * FP_NINF negative infinity
+ * FP_PINF positive infinity
+ * FP_NDENORM negative denormalized non-zero
+ * FP_PDENORM positive denormalized non-zero
+ * FP_NZERO negative zero
+ * FP_PZERO positive zero
+ * FP_NNORM negative normalized non-zero
+ * FP_PNORM positive normalized non-zero
+ */
+/*#define HAS_FPCLASS / **/
+
+/* HAS_FPCLASSIFY:
+ * This symbol, if defined, indicates that the fpclassify routine is
+ * available to classify doubles. Available for example in HP-UX.
+ * The returned values are defined in <math.h> and are
+ *
+ * FP_NORMAL Normalized
+ * FP_ZERO Zero
+ * FP_INFINITE Infinity
+ * FP_SUBNORMAL Denormalized
+ * FP_NAN NaN
+ *
+ */
+/*#define HAS_FPCLASSIFY / **/
+
+/* HAS_FPCLASSL:
+ * This symbol, if defined, indicates that the fpclassl routine is
+ * available to classify long doubles. Available for example in IRIX.
+ * The returned values are defined in <ieeefp.h> and are:
+ *
+ * FP_SNAN signaling NaN
+ * FP_QNAN quiet NaN
+ * FP_NINF negative infinity
+ * FP_PINF positive infinity
+ * FP_NDENORM negative denormalized non-zero
+ * FP_PDENORM positive denormalized non-zero
+ * FP_NZERO negative zero
+ * FP_PZERO positive zero
+ * FP_NNORM negative normalized non-zero
+ * FP_PNORM positive normalized non-zero
+ */
+/*#define HAS_FPCLASSL / **/
+
+/* HAS_FPOS64_T:
+ * This symbol will be defined if the C compiler supports fpos64_t.
+ */
+/*#define HAS_FPOS64_T / **/
+
+/* HAS_FREXPL:
+ * This symbol, if defined, indicates that the frexpl routine is
+ * available to break a long double floating-point number into
+ * a normalized fraction and an integral power of 2.
+ */
+/*#define HAS_FREXPL / **/
+
+/* HAS_STRUCT_FS_DATA:
+ * This symbol, if defined, indicates that the struct fs_data
+ * to do statfs() is supported.
+ */
+/*#define HAS_STRUCT_FS_DATA / **/
+
+/* HAS_FSEEKO:
+ * This symbol, if defined, indicates that the fseeko routine is
+ * available to fseek beyond 32 bits (useful for ILP32 hosts).
+ */
+/*#define HAS_FSEEKO / **/
+
+/* HAS_FSTATFS:
+ * This symbol, if defined, indicates that the fstatfs routine is
+ * available to stat filesystems by file descriptors.
+ */
+/*#define HAS_FSTATFS / **/
+
+/* HAS_FSYNC:
+ * This symbol, if defined, indicates that the fsync routine is
+ * available to write a file's modified data and attributes to
+ * permanent storage.
+ */
+/*#define HAS_FSYNC / **/
+
+/* HAS_FTELLO:
+ * This symbol, if defined, indicates that the ftello routine is
+ * available to ftell beyond 32 bits (useful for ILP32 hosts).
+ */
+/*#define HAS_FTELLO / **/
+
+/* HAS_FUTIMES:
+ * This symbol, if defined, indicates that the futimes routine is
+ * available to change file descriptor time stamps with struct timevals.
+ */
+/*#define HAS_FUTIMES / **/
+
+/* HAS_GETCWD:
+ * This symbol, if defined, indicates that the getcwd routine is
+ * available to get the current working directory.
+ */
+/*#define HAS_GETCWD / **/
+
+/* HAS_GETESPWNAM:
+ * This symbol, if defined, indicates that the getespwnam system call is
+ * available to retrieve enchanced (shadow) password entries by name.
+ */
+/*#define HAS_GETESPWNAM / **/
+
+/* HAS_GETFSSTAT:
+ * This symbol, if defined, indicates that the getfsstat routine is
+ * available to stat filesystems in bulk.
+ */
+/*#define HAS_GETFSSTAT / **/
+
+/* HAS_GETITIMER:
+ * This symbol, if defined, indicates that the getitimer routine is
+ * available to return interval timers.
+ */
+/*#define HAS_GETITIMER / **/
+
+/* HAS_GETMNT:
+ * This symbol, if defined, indicates that the getmnt routine is
+ * available to get filesystem mount info by filename.
+ */
+/*#define HAS_GETMNT / **/
+
+/* HAS_GETMNTENT:
+ * This symbol, if defined, indicates that the getmntent routine is
+ * available to iterate through mounted file systems to get their info.
+ */
+/*#define HAS_GETMNTENT / **/
+
+/* HAS_GETPRPWNAM:
+ * This symbol, if defined, indicates that the getprpwnam system call is
+ * available to retrieve protected (shadow) password entries by name.
+ */
+/*#define HAS_GETPRPWNAM / **/
+
+/* HAS_GETSPNAM:
+ * This symbol, if defined, indicates that the getspnam system call is
+ * available to retrieve SysV shadow password entries by name.
+ */
+/*#define HAS_GETSPNAM / **/
+
+/* HAS_HASMNTOPT:
+ * This symbol, if defined, indicates that the hasmntopt routine is
+ * available to query the mount options of file systems.
+ */
+/*#define HAS_HASMNTOPT / **/
+
+/* HAS_ILOGBL:
+ * This symbol, if defined, indicates that the ilogbl routine is
+ * available. If scalbnl is also present we can emulate frexpl.
+ */
+/*#define HAS_ILOGBL / **/
+
+/* HAS_INT64_T:
+ * This symbol will defined if the C compiler supports int64_t.
+ * Usually the <inttypes.h> needs to be included, but sometimes
+ * <sys/types.h> is enough.
+ */
+/*#define HAS_INT64_T / **/
+
+/* HAS_ISFINITE:
+ * This symbol, if defined, indicates that the isfinite routine is
+ * available to check whether a double is finite (non-infinity non-NaN).
+ */
+/*#define HAS_ISFINITE / **/
+
+/* HAS_ISINF:
+ * This symbol, if defined, indicates that the isinf routine is
+ * available to check whether a double is an infinity.
+ */
+/*#define HAS_ISINF / **/
+
+/* HAS_ISNAN:
+ * This symbol, if defined, indicates that the isnan routine is
+ * available to check whether a double is a NaN.
+ */
+/*#define HAS_ISNAN / **/
+
+/* HAS_ISNANL:
+ * This symbol, if defined, indicates that the isnanl routine is
+ * available to check whether a long double is a NaN.
+ */
+/*#define HAS_ISNANL / **/
+
+/* HAS_LDBL_DIG:
+ * This symbol, if defined, indicates that this system's <float.h>
+ * or <limits.h> defines the symbol LDBL_DIG, which is the number
+ * of significant digits in a long double precision number. Unlike
+ * for DBL_DIG, there's no good guess for LDBL_DIG if it is undefined.
+ */
+/*#define HAS_LDBL_DIG / * */
+
+/* LIBM_LIB_VERSION:
+ * This symbol, if defined, indicates that libm exports _LIB_VERSION
+ * and that math.h defines the enum to manipulate it.
+ */
+/*#define LIBM_LIB_VERSION / **/
+
+/* HAS_MADVISE:
+ * This symbol, if defined, indicates that the madvise system call is
+ * available to map a file into memory.
+ */
+/*#define HAS_MADVISE / **/
+
+/* HAS_MALLOC_SIZE:
+ * This symbol, if defined, indicates that the malloc_size
+ * routine is available for use.
+ */
+/*#define HAS_MALLOC_SIZE / **/
+
+/* HAS_MALLOC_GOOD_SIZE:
+ * This symbol, if defined, indicates that the malloc_good_size
+ * routine is available for use.
+ */
+/*#define HAS_MALLOC_GOOD_SIZE / **/
+
+/* HAS_MKDTEMP:
+ * This symbol, if defined, indicates that the mkdtemp routine is
+ * available to exclusively create a uniquely named temporary directory.
+ */
+/*#define HAS_MKDTEMP / **/
+
+/* HAS_MKSTEMPS:
+ * This symbol, if defined, indicates that the mkstemps routine is
+ * available to excluslvely create and open a uniquely named
+ * (with a suffix) temporary file.
+ */
+/*#define HAS_MKSTEMPS / **/
+
+/* HAS_MODFL:
+ * This symbol, if defined, indicates that the modfl routine is
+ * available to split a long double x into a fractional part f and
+ * an integer part i such that |f| < 1.0 and (f + i) = x.
+ */
+/* HAS_MODFL_PROTO:
+ * This symbol, if defined, indicates that the system provides
+ * a prototype for the modfl() function. Otherwise, it is up
+ * to the program to supply one.
+ */
+/* HAS_MODFL_POW32_BUG:
+ * This symbol, if defined, indicates that the modfl routine is
+ * broken for long doubles >= pow(2, 32).
+ * For example from 4294967303.150000 one would get 4294967302.000000
+ * and 1.150000. The bug has been seen in certain versions of glibc,
+ * release 2.2.2 is known to be okay.
+ */
+/*#define HAS_MODFL / **/
+/*#define HAS_MODFL_PROTO / **/
+/*#define HAS_MODFL_POW32_BUG / **/
+
+/* HAS_MPROTECT:
+ * This symbol, if defined, indicates that the mprotect system call is
+ * available to modify the access protection of a memory mapped file.
+ */
+/*#define HAS_MPROTECT / **/
+
+/* HAS_STRUCT_MSGHDR:
+ * This symbol, if defined, indicates that the struct msghdr
+ * is supported.
+ */
+/*#define HAS_STRUCT_MSGHDR / **/
+
+/* HAS_NL_LANGINFO:
+ * This symbol, if defined, indicates that the nl_langinfo routine is
+ * available to return local data. You will also need <langinfo.h>
+ * and therefore I_LANGINFO.
+ */
+/*#define HAS_NL_LANGINFO / **/
+
+/* HAS_OFF64_T:
+ * This symbol will be defined if the C compiler supports off64_t.
+ */
+/*#define HAS_OFF64_T / **/
+
+/* HAS_PROCSELFEXE:
+ * This symbol is defined if PROCSELFEXE_PATH is a symlink
+ * to the absolute pathname of the executing program.
+ */
+/* PROCSELFEXE_PATH:
+ * If HAS_PROCSELFEXE is defined this symbol is the filename
+ * of the symbolic link pointing to the absolute pathname of
+ * the executing program.
+ */
+/*#define HAS_PROCSELFEXE / **/
+#if defined(HAS_PROCSELFEXE) && !defined(PROCSELFEXE_PATH)
+#define PROCSELFEXE_PATH /**/
+#endif
+
+/* HAS_PTHREAD_ATTR_SETSCOPE:
+ * This symbol, if defined, indicates that the pthread_attr_setscope
+ * system call is available to set the contention scope attribute of
+ * a thread attribute object.
+ */
+/*#define HAS_PTHREAD_ATTR_SETSCOPE / **/
+
+/* HAS_READV:
+ * This symbol, if defined, indicates that the readv routine is
+ * available to do gather reads. You will also need <sys/uio.h>
+ * and there I_SYSUIO.
+ */
+/*#define HAS_READV / **/
+
+/* HAS_RECVMSG:
+ * This symbol, if defined, indicates that the recvmsg routine is
+ * available to send structured socket messages.
+ */
+/*#define HAS_RECVMSG / **/
+
+/* HAS_SBRK_PROTO:
+ * This symbol, if defined, indicates that the system provides
+ * a prototype for the sbrk() function. Otherwise, it is up
+ * to the program to supply one. Good guesses are
+ * extern void* sbrk(int);
+ * extern void* sbrk(size_t);
+ */
+/*#define HAS_SBRK_PROTO / **/
+
+/* HAS_SCALBNL:
+ * This symbol, if defined, indicates that the scalbnl routine is
+ * available. If ilogbl is also present we can emulate frexpl.
+ */
+/*#define HAS_SCALBNL / **/
+
+/* HAS_SENDMSG:
+ * This symbol, if defined, indicates that the sendmsg routine is
+ * available to send structured socket messages.
+ */
+/*#define HAS_SENDMSG / **/
+
+/* HAS_SETITIMER:
+ * This symbol, if defined, indicates that the setitimer routine is
+ * available to set interval timers.
+ */
+/*#define HAS_SETITIMER / **/
+
+/* HAS_SETPROCTITLE:
+ * This symbol, if defined, indicates that the setproctitle routine is
+ * available to set process title.
+ */
+/*#define HAS_SETPROCTITLE / **/
+
+/* USE_SFIO:
+ * This symbol, if defined, indicates that sfio should
+ * be used.
+ */
+/*#define USE_SFIO / **/
+
+/* HAS_SIGNBIT:
+ * This symbol, if defined, indicates that the signbit routine is
+ * available to check if the given number has the sign bit set.
+ * This should include correct testing of -0.0. This will only be set
+ * if the signbit() routine is safe to use with the NV type used internally
+ * in perl. Users should call Perl_signbit(), which will be #defined to
+ * the system's signbit() function or macro if this symbol is defined.
+ */
+/*#define HAS_SIGNBIT / **/
+
+/* HAS_SIGPROCMASK:
+ * This symbol, if defined, indicates that the sigprocmask
+ * system call is available to examine or change the signal mask
+ * of the calling process.
+ */
+/*#define HAS_SIGPROCMASK / **/
+
+/* USE_SITECUSTOMIZE:
+ * This symbol, if defined, indicates that sitecustomize should
+ * be used.
+ */
+#ifndef USE_SITECUSTOMIZE
+/*#define USE_SITECUSTOMIZE / **/
+#endif
+
+/* HAS_SNPRINTF:
+ * This symbol, if defined, indicates that the snprintf () library
+ * function is available for use.
+ */
+/* HAS_VSNPRINTF:
+ * This symbol, if defined, indicates that the vsnprintf () library
+ * function is available for use.
+ */
+/*#define HAS_SNPRINTF / **/
+/*#define HAS_VSNPRINTF / **/
+
+/* HAS_SOCKATMARK:
+ * This symbol, if defined, indicates that the sockatmark routine is
+ * available to test whether a socket is at the out-of-band mark.
+ */
+/*#define HAS_SOCKATMARK / **/
+
+/* HAS_SOCKATMARK_PROTO:
+ * This symbol, if defined, indicates that the system provides
+ * a prototype for the sockatmark() function. Otherwise, it is up
+ * to the program to supply one. A good guess is
+ * extern int sockatmark(int);
+ */
+/*#define HAS_SOCKATMARK_PROTO / **/
+
+/* HAS_SOCKS5_INIT:
+ * This symbol, if defined, indicates that the socks5_init routine is
+ * available to initialize SOCKS 5.
+ */
+/*#define HAS_SOCKS5_INIT / **/
+
+/* SPRINTF_RETURNS_STRLEN:
+ * This variable defines whether sprintf returns the length of the string
+ * (as per the ANSI spec). Some C libraries retain compatibility with
+ * pre-ANSI C and return a pointer to the passed in buffer; for these
+ * this variable will be undef.
+ */
+/*#define SPRINTF_RETURNS_STRLEN / **/
+
+/* HAS_SQRTL:
+ * This symbol, if defined, indicates that the sqrtl routine is
+ * available to do long double square roots.
+ */
+/*#define HAS_SQRTL / **/
+
+/* HAS_SETRESGID_PROTO:
+ * This symbol, if defined, indicates that the system provides
+ * a prototype for the setresgid() function. Otherwise, it is up
+ * to the program to supply one. Good guesses are
+ * extern int setresgid(uid_t ruid, uid_t euid, uid_t suid);
+ */
+/*#define HAS_SETRESGID_PROTO / **/
+
+/* HAS_SETRESUID_PROTO:
+ * This symbol, if defined, indicates that the system provides
+ * a prototype for the setresuid() function. Otherwise, it is up
+ * to the program to supply one. Good guesses are
+ * extern int setresuid(uid_t ruid, uid_t euid, uid_t suid);
+ */
+/*#define HAS_SETRESUID_PROTO / **/
+
+/* HAS_STRUCT_STATFS_F_FLAGS:
+ * This symbol, if defined, indicates that the struct statfs
+ * does have the f_flags member containing the mount flags of
+ * the filesystem containing the file.
+ * This kind of struct statfs is coming from <sys/mount.h> (BSD 4.3),
+ * not from <sys/statfs.h> (SYSV). Older BSDs (like Ultrix) do not
+ * have statfs() and struct statfs, they have ustat() and getmnt()
+ * with struct ustat and struct fs_data.
+ */
+/*#define HAS_STRUCT_STATFS_F_FLAGS / **/
+
+/* HAS_STRUCT_STATFS:
+ * This symbol, if defined, indicates that the struct statfs
+ * to do statfs() is supported.
+ */
+/*#define HAS_STRUCT_STATFS / **/
+
+/* HAS_FSTATVFS:
+ * This symbol, if defined, indicates that the fstatvfs routine is
+ * available to stat filesystems by file descriptors.
+ */
+/*#define HAS_FSTATVFS / **/
+
+/* HAS_STRFTIME:
+ * This symbol, if defined, indicates that the strftime routine is
+ * available to do time formatting.
+ */
+/*#define HAS_STRFTIME / **/
+
+/* HAS_STRLCAT:
+ * This symbol, if defined, indicates that the strlcat () routine is
+ * available to do string concatenation.
+ */
+/*#define HAS_STRLCAT / **/
+
+/* HAS_STRLCPY:
+ * This symbol, if defined, indicates that the strlcpy () routine is
+ * available to do string copying.
+ */
+/*#define HAS_STRLCPY / **/
+
+/* HAS_STRTOLD:
+ * This symbol, if defined, indicates that the strtold routine is
+ * available to convert strings to long doubles.
+ */
+/*#define HAS_STRTOLD / **/
+
+/* HAS_STRTOLL:
+ * This symbol, if defined, indicates that the strtoll routine is
+ * available to convert strings to long longs.
+ */
+/*#define HAS_STRTOLL / **/
+
+/* HAS_STRTOQ:
+ * This symbol, if defined, indicates that the strtoq routine is
+ * available to convert strings to long longs (quads).
+ */
+/*#define HAS_STRTOQ / **/
+
+/* HAS_STRTOULL:
+ * This symbol, if defined, indicates that the strtoull routine is
+ * available to convert strings to unsigned long longs.
+ */
+/*#define HAS_STRTOULL / **/
+
+/* HAS_STRTOUQ:
+ * This symbol, if defined, indicates that the strtouq routine is
+ * available to convert strings to unsigned long longs (quads).
+ */
+/*#define HAS_STRTOUQ / **/
+
+/* HAS_SYSCALL_PROTO:
+ * This symbol, if defined, indicates that the system provides
+ * a prototype for the syscall() function. Otherwise, it is up
+ * to the program to supply one. Good guesses are
+ * extern int syscall(int, ...);
+ * extern int syscall(long, ...);
+ */
+/*#define HAS_SYSCALL_PROTO / **/
+
+/* HAS_TELLDIR_PROTO:
+ * This symbol, if defined, indicates that the system provides
+ * a prototype for the telldir() function. Otherwise, it is up
+ * to the program to supply one. A good guess is
+ * extern long telldir(DIR*);
+ */
+/*#define HAS_TELLDIR_PROTO / **/
+
+/* U32_ALIGNMENT_REQUIRED:
+ * This symbol, if defined, indicates that you must access
+ * character data through U32-aligned pointers.
+ */
+#ifndef U32_ALIGNMENT_REQUIRED
+#define U32_ALIGNMENT_REQUIRED /**/
+#endif
+
+/* HAS_UALARM:
+ * This symbol, if defined, indicates that the ualarm routine is
+ * available to do alarms with microsecond granularity.
+ */
+/*#define HAS_UALARM / **/
+
+/* HAS_UNORDERED:
+ * This symbol, if defined, indicates that the unordered routine is
+ * available to check whether two doubles are unordered
+ * (effectively: whether either of them is NaN)
+ */
+/*#define HAS_UNORDERED / **/
+
+/* HAS_UNSETENV:
+ * This symbol, if defined, indicates that the unsetenv () routine is
+ * available for use.
+ */
+/*#define HAS_UNSETENV / **/
+
+/* HAS_USLEEP_PROTO:
+ * This symbol, if defined, indicates that the system provides
+ * a prototype for the usleep() function. Otherwise, it is up
+ * to the program to supply one. A good guess is
+ * extern int usleep(useconds_t);
+ */
+/*#define HAS_USLEEP_PROTO / **/
+
+/* HAS_USTAT:
+ * This symbol, if defined, indicates that the ustat system call is
+ * available to query file system statistics by dev_t.
+ */
+/*#define HAS_USTAT / **/
+
+/* HAS_WRITEV:
+ * This symbol, if defined, indicates that the writev routine is
+ * available to do scatter writes.
+ */
+/*#define HAS_WRITEV / **/
+
+/* USE_DYNAMIC_LOADING:
+ * This symbol, if defined, indicates that dynamic loading of
+ * some sort is available.
+ */
+/*#define USE_DYNAMIC_LOADING / **/
+
+/* FFLUSH_NULL:
+ * This symbol, if defined, tells that fflush(NULL) does flush
+ * all pending stdio output.
+ */
+/* FFLUSH_ALL:
+ * This symbol, if defined, tells that to flush
+ * all pending stdio output one must loop through all
+ * the stdio file handles stored in an array and fflush them.
+ * Note that if fflushNULL is defined, fflushall will not
+ * even be probed for and will be left undefined.
+ */
+/*#define FFLUSH_NULL / **/
+/*#define FFLUSH_ALL / **/
+
+/* I_ASSERT:
+ * This symbol, if defined, indicates that <assert.h> exists and
+ * could be included by the C program to get the assert() macro.
+ */
+#define I_ASSERT /**/
+
+/* I_CRYPT:
+ * This symbol, if defined, indicates that <crypt.h> exists and
+ * should be included.
+ */
+/*#define I_CRYPT / **/
+
+/* DB_Prefix_t:
+ * This symbol contains the type of the prefix structure element
+ * in the <db.h> header file. In older versions of DB, it was
+ * int, while in newer ones it is u_int32_t.
+ */
+/* DB_Hash_t:
+ * This symbol contains the type of the prefix structure element
+ * in the <db.h> header file. In older versions of DB, it was
+ * int, while in newer ones it is size_t.
+ */
+/* DB_VERSION_MAJOR_CFG:
+ * This symbol, if defined, defines the major version number of
+ * Berkeley DB found in the <db.h> header when Perl was configured.
+ */
+/* DB_VERSION_MINOR_CFG:
+ * This symbol, if defined, defines the minor version number of
+ * Berkeley DB found in the <db.h> header when Perl was configured.
+ * For DB version 1 this is always 0.
+ */
+/* DB_VERSION_PATCH_CFG:
+ * This symbol, if defined, defines the patch version number of
+ * Berkeley DB found in the <db.h> header when Perl was configured.
+ * For DB version 1 this is always 0.
+ */
+#define DB_Hash_t u_int32_t /**/
+#define DB_Prefix_t size_t /**/
+#define DB_VERSION_MAJOR_CFG 0 /**/
+#define DB_VERSION_MINOR_CFG 0 /**/
+#define DB_VERSION_PATCH_CFG 0 /**/
+
+/* I_FP:
+ * This symbol, if defined, indicates that <fp.h> exists and
+ * should be included.
+ */
+/*#define I_FP / **/
+
+/* I_FP_CLASS:
+ * This symbol, if defined, indicates that <fp_class.h> exists and
+ * should be included.
+ */
+/*#define I_FP_CLASS / **/
+
+/* I_IEEEFP:
+ * This symbol, if defined, indicates that <ieeefp.h> exists and
+ * should be included.
+ */
+/*#define I_IEEEFP / **/
+
+/* I_INTTYPES:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <inttypes.h>.
+ */
+/*#define I_INTTYPES / **/
+
+/* I_LANGINFO:
+ * This symbol, if defined, indicates that <langinfo.h> exists and
+ * should be included.
+ */
+/*#define I_LANGINFO / **/
+
+/* I_LIBUTIL:
+ * This symbol, if defined, indicates that <libutil.h> exists and
+ * should be included.
+ */
+/*#define I_LIBUTIL / **/
+
+/* I_MNTENT:
+ * This symbol, if defined, indicates that <mntent.h> exists and
+ * should be included.
+ */
+/*#define I_MNTENT / **/
+
+/* I_NETINET_TCP:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <netinet/tcp.h>.
+ */
+/*#define I_NETINET_TCP / **/
+
+/* I_POLL:
+ * This symbol, if defined, indicates that <poll.h> exists and
+ * should be included. (see also HAS_POLL)
+ */
+/*#define I_POLL / **/
+
+/* I_PROT:
+ * This symbol, if defined, indicates that <prot.h> exists and
+ * should be included.
+ */
+/*#define I_PROT / **/
+
+/* I_SHADOW:
+ * This symbol, if defined, indicates that <shadow.h> exists and
+ * should be included.
+ */
+/*#define I_SHADOW / **/
+
+/* I_SOCKS:
+ * This symbol, if defined, indicates that <socks.h> exists and
+ * should be included.
+ */
+/*#define I_SOCKS / **/
+
+/* I_SUNMATH:
+ * This symbol, if defined, indicates that <sunmath.h> exists and
+ * should be included.
+ */
+/*#define I_SUNMATH / **/
+
+/* I_SYSLOG:
+ * This symbol, if defined, indicates that <syslog.h> exists and
+ * should be included.
+ */
+/*#define I_SYSLOG / **/
+
+/* I_SYSMODE:
+ * This symbol, if defined, indicates that <sys/mode.h> exists and
+ * should be included.
+ */
+/*#define I_SYSMODE / **/
+
+/* I_SYS_MOUNT:
+ * This symbol, if defined, indicates that <sys/mount.h> exists and
+ * should be included.
+ */
+/*#define I_SYS_MOUNT / **/
+
+/* I_SYS_STATFS:
+ * This symbol, if defined, indicates that <sys/statfs.h> exists.
+ */
+/*#define I_SYS_STATFS / **/
+
+/* I_SYS_STATVFS:
+ * This symbol, if defined, indicates that <sys/statvfs.h> exists and
+ * should be included.
+ */
+/*#define I_SYS_STATVFS / **/
+
+/* I_SYSUTSNAME:
+ * This symbol, if defined, indicates that <sys/utsname.h> exists and
+ * should be included.
+ */
+/*#define I_SYSUTSNAME / **/
+
+/* I_SYS_VFS:
+ * This symbol, if defined, indicates that <sys/vfs.h> exists and
+ * should be included.
+ */
+/*#define I_SYS_VFS / **/
+
+/* I_USTAT:
+ * This symbol, if defined, indicates that <ustat.h> exists and
+ * should be included.
+ */
+/*#define I_USTAT / **/
+
+/* PERL_PRIfldbl:
+ * This symbol, if defined, contains the string used by stdio to
+ * format long doubles (format 'f') for output.
+ */
+/* PERL_PRIgldbl:
+ * This symbol, if defined, contains the string used by stdio to
+ * format long doubles (format 'g') for output.
+ */
+/* PERL_PRIeldbl:
+ * This symbol, if defined, contains the string used by stdio to
+ * format long doubles (format 'e') for output.
+ */
+/* PERL_SCNfldbl:
+ * This symbol, if defined, contains the string used by stdio to
+ * format long doubles (format 'f') for input.
+ */
+/*#define PERL_PRIfldbl "llf" / **/
+/*#define PERL_PRIgldbl "llg" / **/
+/*#define PERL_PRIeldbl "lle" / **/
+/*#define PERL_SCNfldbl "llf" / **/
+
+/* PERL_MAD:
+ * This symbol, if defined, indicates that the Misc Attribution
+ * Declaration code should be conditionally compiled.
+ */
+/*#define PERL_MAD / **/
+
+/* NEED_VA_COPY:
+ * This symbol, if defined, indicates that the system stores
+ * the variable argument list datatype, va_list, in a format
+ * that cannot be copied by simple assignment, so that some
+ * other means must be used when copying is required.
+ * As such systems vary in their provision (or non-provision)
+ * of copying mechanisms, handy.h defines a platform-
+ * independent macro, Perl_va_copy(src, dst), to do the job.
+ */
+/*#define NEED_VA_COPY / **/
+
+/* IVTYPE:
+ * This symbol defines the C type used for Perl's IV.
+ */
+/* UVTYPE:
+ * This symbol defines the C type used for Perl's UV.
+ */
+/* I8TYPE:
+ * This symbol defines the C type used for Perl's I8.
+ */
+/* U8TYPE:
+ * This symbol defines the C type used for Perl's U8.
+ */
+/* I16TYPE:
+ * This symbol defines the C type used for Perl's I16.
+ */
+/* U16TYPE:
+ * This symbol defines the C type used for Perl's U16.
+ */
+/* I32TYPE:
+ * This symbol defines the C type used for Perl's I32.
+ */
+/* U32TYPE:
+ * This symbol defines the C type used for Perl's U32.
+ */
+/* I64TYPE:
+ * This symbol defines the C type used for Perl's I64.
+ */
+/* U64TYPE:
+ * This symbol defines the C type used for Perl's U64.
+ */
+/* NVTYPE:
+ * This symbol defines the C type used for Perl's NV.
+ */
+/* IVSIZE:
+ * This symbol contains the sizeof(IV).
+ */
+/* UVSIZE:
+ * This symbol contains the sizeof(UV).
+ */
+/* I8SIZE:
+ * This symbol contains the sizeof(I8).
+ */
+/* U8SIZE:
+ * This symbol contains the sizeof(U8).
+ */
+/* I16SIZE:
+ * This symbol contains the sizeof(I16).
+ */
+/* U16SIZE:
+ * This symbol contains the sizeof(U16).
+ */
+/* I32SIZE:
+ * This symbol contains the sizeof(I32).
+ */
+/* U32SIZE:
+ * This symbol contains the sizeof(U32).
+ */
+/* I64SIZE:
+ * This symbol contains the sizeof(I64).
+ */
+/* U64SIZE:
+ * This symbol contains the sizeof(U64).
+ */
+/* NVSIZE:
+ * This symbol contains the sizeof(NV).
+ */
+/* NV_PRESERVES_UV:
+ * This symbol, if defined, indicates that a variable of type NVTYPE
+ * can preserve all the bits of a variable of type UVTYPE.
+ */
+/* NV_PRESERVES_UV_BITS:
+ * This symbol contains the number of bits a variable of type NVTYPE
+ * can preserve of a variable of type UVTYPE.
+ */
+/* NV_ZERO_IS_ALLBITS_ZERO:
+ * This symbol, if defined, indicates that a variable of type NVTYPE
+ * stores 0.0 in memory as all bits zero.
+ */
+#define IVTYPE long /**/
+#define UVTYPE unsigned long /**/
+#define I8TYPE char /**/
+#define U8TYPE unsigned char /**/
+#define I16TYPE short /**/
+#define U16TYPE unsigned short /**/
+#define I32TYPE long /**/
+#define U32TYPE unsigned long /**/
+#ifdef HAS_QUAD
+#define I64TYPE int64_t /**/
+#define U64TYPE uint64_t /**/
+#endif
+#define NVTYPE double /**/
+#define IVSIZE 4 /**/
+#define UVSIZE 4 /**/
+#define I8SIZE 1 /**/
+#define U8SIZE 1 /**/
+#define I16SIZE 2 /**/
+#define U16SIZE 2 /**/
+#define I32SIZE 4 /**/
+#define U32SIZE 4 /**/
+#ifdef HAS_QUAD
+#define I64SIZE 8 /**/
+#define U64SIZE 8 /**/
+#endif
+#define NVSIZE 8 /**/
+#undef NV_PRESERVES_UV
+#define NV_PRESERVES_UV_BITS 0
+#undef NV_ZERO_IS_ALLBITS_ZERO
+#if UVSIZE == 8
+# ifdef BYTEORDER
+# if BYTEORDER == 0x1234
+# undef BYTEORDER
+# define BYTEORDER 0x12345678
+# else
+# if BYTEORDER == 0x4321
+# undef BYTEORDER
+# define BYTEORDER 0x87654321
+# endif
+# endif
+# endif
+#endif
+
+/* IVdf:
+ * This symbol defines the format string used for printing a Perl IV
+ * as a signed decimal integer.
+ */
+/* UVuf:
+ * This symbol defines the format string used for printing a Perl UV
+ * as an unsigned decimal integer.
+ */
+/* UVof:
+ * This symbol defines the format string used for printing a Perl UV
+ * as an unsigned octal integer.
+ */
+/* UVxf:
+ * This symbol defines the format string used for printing a Perl UV
+ * as an unsigned hexadecimal integer in lowercase abcdef.
+ */
+/* UVXf:
+ * This symbol defines the format string used for printing a Perl UV
+ * as an unsigned hexadecimal integer in uppercase ABCDEF.
+ */
+/* NVef:
+ * This symbol defines the format string used for printing a Perl NV
+ * using %e-ish floating point format.
+ */
+/* NVff:
+ * This symbol defines the format string used for printing a Perl NV
+ * using %f-ish floating point format.
+ */
+/* NVgf:
+ * This symbol defines the format string used for printing a Perl NV
+ * using %g-ish floating point format.
+ */
+#define IVdf "ld" /**/
+#define UVuf "lu" /**/
+#define UVof "lo" /**/
+#define UVxf "lx" /**/
+#define UVXf "lX" /**/
+#define NVef "e" /**/
+#define NVff "f" /**/
+#define NVgf "g" /**/
+
+/* SELECT_MIN_BITS:
+ * This symbol holds the minimum number of bits operated by select.
+ * That is, if you do select(n, ...), how many bits at least will be
+ * cleared in the masks if some activity is detected. Usually this
+ * is either n or 32*ceil(n/32), especially many little-endians do
+ * the latter. This is only useful if you have select(), naturally.
+ */
+#define SELECT_MIN_BITS 32 /**/
+
+/* STARTPERL:
+ * This variable contains the string to put in front of a perl
+ * script to make sure (one hopes) that it runs with perl and not
+ * some shell.
+ */
+#define STARTPERL "#!perl" /**/
+
+/* HAS_STDIO_STREAM_ARRAY:
+ * This symbol, if defined, tells that there is an array
+ * holding the stdio streams.
+ */
+/* STDIO_STREAM_ARRAY:
+ * This symbol tells the name of the array holding the stdio streams.
+ * Usual values include _iob, __iob, and __sF.
+ */
+/*#define HAS_STDIO_STREAM_ARRAY / **/
+#define STDIO_STREAM_ARRAY
+
+/* USE_64_BIT_INT:
+ * This symbol, if defined, indicates that 64-bit integers should
+ * be used when available. If not defined, the native integers
+ * will be employed (be they 32 or 64 bits). The minimal possible
+ * 64-bitness is used, just enough to get 64-bit integers into Perl.
+ * This may mean using for example "long longs", while your memory
+ * may still be limited to 2 gigabytes.
+ */
+/* USE_64_BIT_ALL:
+ * This symbol, if defined, indicates that 64-bit integers should
+ * be used when available. If not defined, the native integers
+ * will be used (be they 32 or 64 bits). The maximal possible
+ * 64-bitness is employed: LP64 or ILP64, meaning that you will
+ * be able to use more than 2 gigabytes of memory. This mode is
+ * even more binary incompatible than USE_64_BIT_INT. You may not
+ * be able to run the resulting executable in a 32-bit CPU at all or
+ * you may need at least to reboot your OS to 64-bit mode.
+ */
+#ifndef USE_64_BIT_INT
+/*#define USE_64_BIT_INT / **/
+#endif
+
+#ifndef USE_64_BIT_ALL
+/*#define USE_64_BIT_ALL / **/
+#endif
+
+/* USE_FAST_STDIO:
+ * This symbol, if defined, indicates that Perl should
+ * be built to use 'fast stdio'.
+ * Defaults to define in Perls 5.8 and earlier, to undef later.
+ */
+#ifndef USE_FAST_STDIO
+/*#define USE_FAST_STDIO / **/
+#endif
+
+/* USE_LARGE_FILES:
+ * This symbol, if defined, indicates that large file support
+ * should be used when available.
+ */
+#ifndef USE_LARGE_FILES
+/*#define USE_LARGE_FILES / **/
+#endif
+
+/* USE_LONG_DOUBLE:
+ * This symbol, if defined, indicates that long doubles should
+ * be used when available.
+ */
+#ifndef USE_LONG_DOUBLE
+/*#define USE_LONG_DOUBLE / **/
+#endif
+
+/* USE_MORE_BITS:
+ * This symbol, if defined, indicates that 64-bit interfaces and
+ * long doubles should be used when available.
+ */
+#ifndef USE_MORE_BITS
+/*#define USE_MORE_BITS / **/
+#endif
+
+/* MULTIPLICITY:
+ * This symbol, if defined, indicates that Perl should
+ * be built to use multiplicity.
+ */
+#ifndef MULTIPLICITY
+/*#define MULTIPLICITY / **/
+#endif
+
+/* USE_PERLIO:
+ * This symbol, if defined, indicates that the PerlIO abstraction should
+ * be used throughout. If not defined, stdio should be
+ * used in a fully backward compatible manner.
+ */
+#ifndef USE_PERLIO
+/*#define USE_PERLIO / **/
+#endif
+
+/* USE_SOCKS:
+ * This symbol, if defined, indicates that Perl should
+ * be built to use socks.
+ */
+#ifndef USE_SOCKS
+/*#define USE_SOCKS / **/
+#endif
#endif
projects / p5sagit/p5-mst-13.2.git / commitdiff