(from vos/config.h). Update Porting/{Glossary,config*}.
p4raw-id: //depot/cfgperl@2204
# $Id: Head.U,v 3.0.1.9 1997/02/28 15:02:09 ram Exp $
#
-# Generated on Wed Nov 4 10:29:46 EET 1998 [metaconfig 3.0 PL70]
+# Generated on Thu Nov 5 14:26:57 EET 1998 [metaconfig 3.0 PL70]
# (with additional metaconfig patches by jhi@iki.fi)
cat >/tmp/c1$$ <<EOF
groupstype=''
: default library list
libswanted=''
+: some systems want to use only the non-versioned libso:s
ignore_versioned_solibs=''
: full support for void wanted by default
defvoidused=15
set d_crypt
eval $setvar
+: get csh whereabouts
+case "$csh" in
+'csh') val="$undef" ;;
+*) val="$define" ;;
+esac
+set d_csh
+eval $setvar
+: Respect a hint or command line value for full_csh.
+case "$full_csh" in
+'') full_csh=$csh ;;
+esac
+
: see if cuserid exists
set cuserid d_cuserid
eval $inlibc
set fcntl d_fcntl
eval $inlibc
+socketlib=''
+sockethdr=''
+: see whether socket exists
+echo " "
+$echo $n "Hmm... $c" >&4
+if set socket val -f d_socket; eval $csym; $val; then
+ echo "Looks like you have Berkeley networking support." >&4
+ d_socket="$define"
+ if set setsockopt val -f; eval $csym; $val; then
+ d_oldsock="$undef"
+ else
+ echo "...but it uses the old 4.1c interface, rather than 4.2" >&4
+ d_oldsock="$define"
+ fi
+else
+ if $contains socklib libc.list >/dev/null 2>&1; then
+ echo "Looks like you have Berkeley networking support." >&4
+ d_socket="$define"
+ : we will have to assume that it supports the 4.2 BSD interface
+ d_oldsock="$undef"
+ else
+ echo "You don't have Berkeley networking in libc$_a..." >&4
+ for net in net socket
+ do
+ if test -f /usr/lib/lib$net$_a; then
+ ( ($nm $nm_opt /usr/lib/lib$net$_a | eval $nm_extract) || \
+ $ar t /usr/lib/lib$net$_a) 2>/dev/null >> libc.list
+ if $contains socket libc.list >/dev/null 2>&1; then
+ d_socket="$define"
+ case "$net" in
+ net)
+ echo "...but the Wollongong group seems to have hacked it in." >&4
+ socketlib="-lnet"
+ sockethdr="-I/usr/netinclude"
+ ;;
+ esac
+ if $contains setsockopt libc.list >/dev/null 2>&1; then
+ d_oldsock="$undef"
+ else
+ echo "...using the old 4.1c interface, rather than 4.2" >&4
+ d_oldsock="$define"
+ fi
+ break
+ fi
+ fi
+ done
+ if test "X$d_socket" != "X$define"; then
+ echo "or anywhere else I see." >&4
+ d_socket="$undef"
+ d_oldsock="$undef"
+ fi
+ fi
+fi
+
+: see if socketpair exists
+set socketpair d_sockpair
+eval $inlibc
+
+: see if sys/select.h has to be included
+set sys/select.h i_sysselct
+eval $inhdr
+
+: see if we should include time.h, sys/time.h, or both
+echo " "
+if test "X$timeincl" = X; then
+ echo "Testing to see if we should include <time.h>, <sys/time.h> or both." >&4
+ $echo $n "I'm now running the test program...$c"
+ $cat >try.c <<'EOCP'
+#include <sys/types.h>
+#ifdef I_TIME
+#include <time.h>
+#endif
+#ifdef I_SYSTIME
+#ifdef SYSTIMEKERNEL
+#define KERNEL
+#endif
+#include <sys/time.h>
+#endif
+#ifdef I_SYSSELECT
+#include <sys/select.h>
+#endif
+main()
+{
+ struct tm foo;
+#ifdef S_TIMEVAL
+ struct timeval bar;
+#endif
+#ifdef S_TIMEZONE
+ struct timezone tzp;
+#endif
+ if (foo.tm_sec == foo.tm_sec)
+ exit(0);
+#ifdef S_TIMEVAL
+ if (bar.tv_sec == bar.tv_sec)
+ exit(0);
+#endif
+ exit(1);
+}
+EOCP
+ flags=''
+ for s_timezone in '-DS_TIMEZONE' ''; do
+ sysselect=''
+ for s_timeval in '-DS_TIMEVAL' ''; do
+ for i_systimek in '' '-DSYSTIMEKERNEL'; do
+ for i_time in '' '-DI_TIME'; do
+ for i_systime in '-DI_SYSTIME' ''; do
+ case "$flags" in
+ '') $echo $n ".$c"
+ set try $i_time $i_systime $i_systimek $sysselect $s_timeval $s_timezone
+ if eval $compile; then
+ set X $i_time $i_systime $i_systimek $sysselect $s_timeval
+ shift
+ flags="$*"
+ echo " "
+ $echo $n "Succeeded with $flags$c"
+ fi
+ ;;
+ esac
+ done
+ done
+ done
+ done
+ done
+ timeincl=''
+ echo " "
+ case "$flags" in
+ *SYSTIMEKERNEL*) i_systimek="$define"
+ timeincl=`./findhdr sys/time.h`
+ echo "We'll include <sys/time.h> with KERNEL defined." >&4;;
+ *) i_systimek="$undef";;
+ esac
+ case "$flags" in
+ *I_TIME*) i_time="$define"
+ timeincl=`./findhdr time.h`" $timeincl"
+ echo "We'll include <time.h>." >&4;;
+ *) i_time="$undef";;
+ esac
+ case "$flags" in
+ *I_SYSTIME*) i_systime="$define"
+ timeincl=`./findhdr sys/time.h`" $timeincl"
+ echo "We'll include <sys/time.h>." >&4;;
+ *) i_systime="$undef";;
+ esac
+ $rm -f try.c try
+fi
+
+: check for fd_set items
+$cat <<EOM
+
+Checking to see how well your C compiler handles fd_set and friends ...
+EOM
+$cat >fd_set.c <<EOCP
+#$i_systime I_SYS_TIME
+#$i_sysselct I_SYS_SELECT
+#$d_socket HAS_SOCKET
+#include <sys/types.h>
+#ifdef HAS_SOCKET
+#include <sys/socket.h> /* Might include <sys/bsdtypes.h> */
+#endif
+#ifdef I_SYS_TIME
+#include <sys/time.h>
+#endif
+#ifdef I_SYS_SELECT
+#include <sys/select.h>
+#endif
+main() {
+ fd_set fds;
+
+#ifdef TRYBITS
+ if(fds.fds_bits);
+#endif
+
+#if defined(FD_SET) && defined(FD_CLR) && defined(FD_ISSET) && defined(FD_ZERO)
+ exit(0);
+#else
+ exit(1);
+#endif
+}
+EOCP
+set fd_set -DTRYBITS
+if eval $compile; then
+ d_fds_bits="$define"
+ d_fd_set="$define"
+ echo "Well, your system knows about the normal fd_set typedef..." >&4
+ if ./fd_set; then
+ echo "and you have the normal fd_set macros (just as I'd expect)." >&4
+ d_fd_macros="$define"
+ else
+ $cat >&4 <<'EOM'
+but not the normal fd_set macros! Gaaack! I'll have to cover for you.
+EOM
+ d_fd_macros="$undef"
+ fi
+else
+ $cat <<'EOM'
+Hmm, your compiler has some difficulty with fd_set. Checking further...
+EOM
+ set fd_set
+ if eval $compile; then
+ d_fds_bits="$undef"
+ d_fd_set="$define"
+ echo "Well, your system has some sort of fd_set available..." >&4
+ if ./fd_set; then
+ echo "and you have the normal fd_set macros." >&4
+ d_fd_macros="$define"
+ else
+ $cat <<'EOM'
+but not the normal fd_set macros! Gross! More work for me...
+EOM
+ d_fd_macros="$undef"
+ fi
+ else
+ echo "Well, you got zip. That's OK, I can roll my own fd_set stuff." >&4
+ d_fd_set="$undef"
+ d_fds_bits="$undef"
+ d_fd_macros="$undef"
+ fi
+fi
+$rm -f fd_set*
+
: see if fgetpos exists
set fgetpos d_fgetpos
eval $inlibc
set gethostent d_gethent
eval $inlibc
+: see how we will look up host name
+echo " "
+if false; then
+ : dummy stub to allow use of elif
+elif set gethostname val -f d_gethname; eval $csym; $val; then
+ echo 'gethostname() found.' >&4
+ d_gethname="$define"
+ call=gethostname
+elif set uname val -f d_uname; eval $csym; $val; then
+ if ./xenix; then
+ $cat <<'EOM'
+uname() was found, but you're running xenix, and older versions of xenix
+have a broken uname(). If you don't really know whether your xenix is old
+enough to have a broken system call, use the default answer.
+
+EOM
+ dflt=y
+ case "$d_uname" in
+ "$define") dflt=n;;
+ esac
+ rp='Is your uname() broken?'
+ . ./myread
+ case "$ans" in
+ n*) d_uname="$define"; call=uname;;
+ esac
+ else
+ echo 'uname() found.' >&4
+ d_uname="$define"
+ call=uname
+ fi
+fi
+case "$d_gethname" in
+'') d_gethname="$undef";;
+esac
+case "$d_uname" in
+'') d_uname="$undef";;
+esac
+case "$d_uname$d_gethname" in
+*define*)
+ dflt=n
+ cat <<EOM
+
+Every now and then someone has a $call() that lies about the hostname
+but can't be fixed for political or economic reasons. If you wish, I can
+pretend $call() isn't there and maybe compute hostname at run-time
+thanks to the '$phostname' command.
+
+EOM
+ rp="Shall I ignore $call() from now on?"
+ . ./myread
+ case "$ans" in
+ y*) d_uname="$undef" d_gethname="$undef"; $echo $n "Okay...$c";;
+ esac;;
+esac
+case "$phostname" in
+'') aphostname='';;
+*) case "$aphostname" in
+ /*) ;;
+ *) set X $phostname
+ shift
+ file=$1
+ shift
+ file=`./loc $file $file $pth`
+ aphostname=`echo $file $*`
+ ;;
+ esac
+ ;;
+esac
+case "$d_uname$d_gethname" in
+*define*) ;;
+*)
+ case "$phostname" in
+ '')
+ echo "There will be no way for $package to get your hostname." >&4;;
+ *)
+ echo "I'll use 'popen("'"'$aphostname'", "r")'"' to get your hostname." >&4
+ ;;
+ esac;;
+esac
+case "$d_phostname" in
+'') d_phostname="$undef";;
+esac
+
: see if this is a netdb.h system
set netdb.h i_netdb
eval $inhdr
: see if inttypes.h is available
: we want a real compile instead of Inhdr because some systems
: have an inttypes.h which includes non-existent headers
+echo " "
$cat >try.c <<EOCP
#include <inttypes.h>
-extern int foo;
+main() {
+ static int32_t foo32 = 0x12345678;
+}
EOCP
set try
-if eval $compile_ok; then
+if eval $compile; then
+ echo "<inttypes.h> found." >&4
val="$define"
else
+ echo "<inttypes.h> NOT found." >&4
val="$undef"
fi
+$rm -f try.c try
set i_inttypes
eval $setvar
: see if sigsetjmp exists
echo " "
-case "$d_sigsetjmp" in
-'')
- $cat >try.c <<'EOP'
-#include <setjmp.h>
-sigjmp_buf env;
-int set = 1;
-main()
-{
- if (sigsetjmp(env,1))
- exit(set);
- set = 0;
- siglongjmp(env, 1);
- exit(1);
-}
-EOP
- set try
- if eval $compile; then
- if ./try >/dev/null 2>&1; then
- echo "POSIX sigsetjmp found." >&4
- val="$define"
- else
- $cat >&4 <<EOM
-Uh-Oh! You have POSIX sigsetjmp and siglongjmp, but they do not work properly!!
-I'll ignore them.
-EOM
- val="$undef"
- fi
- else
- echo "sigsetjmp not found." >&4
- val="$undef"
- fi
- ;;
-*) val="$d_sigsetjmp"
- case "$d_sigsetjmp" in
- $define) echo "POSIX sigsetjmp found." >&4;;
- $undef) echo "sigsetjmp not found." >&4;;
- esac
- ;;
-esac
-set d_sigsetjmp
-eval $setvar
-$rm -f try.c try
-
-socketlib=''
-sockethdr=''
-: see whether socket exists
-echo " "
-$echo $n "Hmm... $c" >&4
-if set socket val -f d_socket; eval $csym; $val; then
- echo "Looks like you have Berkeley networking support." >&4
- d_socket="$define"
- if set setsockopt val -f; eval $csym; $val; then
- d_oldsock="$undef"
- else
- echo "...but it uses the old 4.1c interface, rather than 4.2" >&4
- d_oldsock="$define"
- fi
-else
- if $contains socklib libc.list >/dev/null 2>&1; then
- echo "Looks like you have Berkeley networking support." >&4
- d_socket="$define"
- : we will have to assume that it supports the 4.2 BSD interface
- d_oldsock="$undef"
- else
- echo "You don't have Berkeley networking in libc$_a..." >&4
- for net in net socket
- do
- if test -f /usr/lib/lib$net$_a; then
- ( ($nm $nm_opt /usr/lib/lib$net$_a | eval $nm_extract) || \
- $ar t /usr/lib/lib$net$_a) 2>/dev/null >> libc.list
- if $contains socket libc.list >/dev/null 2>&1; then
- d_socket="$define"
- case "$net" in
- net)
- echo "...but the Wollongong group seems to have hacked it in." >&4
- socketlib="-lnet"
- sockethdr="-I/usr/netinclude"
- ;;
- esac
- if $contains setsockopt libc.list >/dev/null 2>&1; then
- d_oldsock="$undef"
- else
- echo "...using the old 4.1c interface, rather than 4.2" >&4
- d_oldsock="$define"
- fi
- break
- fi
- fi
- done
- if test "X$d_socket" != "X$define"; then
- echo "or anywhere else I see." >&4
- d_socket="$undef"
- d_oldsock="$undef"
+case "$d_sigsetjmp" in
+'')
+ $cat >try.c <<'EOP'
+#include <setjmp.h>
+sigjmp_buf env;
+int set = 1;
+main()
+{
+ if (sigsetjmp(env,1))
+ exit(set);
+ set = 0;
+ siglongjmp(env, 1);
+ exit(1);
+}
+EOP
+ set try
+ if eval $compile; then
+ if ./try >/dev/null 2>&1; then
+ echo "POSIX sigsetjmp found." >&4
+ val="$define"
+ else
+ $cat >&4 <<EOM
+Uh-Oh! You have POSIX sigsetjmp and siglongjmp, but they do not work properly!!
+I'll ignore them.
+EOM
+ val="$undef"
fi
+ else
+ echo "sigsetjmp not found." >&4
+ val="$undef"
fi
-fi
-
-: see if socketpair exists
-set socketpair d_sockpair
-eval $inlibc
+ ;;
+*) val="$d_sigsetjmp"
+ case "$d_sigsetjmp" in
+ $define) echo "POSIX sigsetjmp found." >&4;;
+ $undef) echo "sigsetjmp not found." >&4;;
+ esac
+ ;;
+esac
+set d_sigsetjmp
+eval $setvar
+$rm -f try.c try
: see if stat knows about block sizes
echo " "
set umask d_umask
eval $inlibc
-: see how we will look up host name
-echo " "
-if false; then
- : dummy stub to allow use of elif
-elif set uname val -f d_uname; eval $csym; $val; then
- if ./xenix; then
- $cat <<'EOM'
-uname() was found, but you're running xenix, and older versions of xenix
-have a broken uname(). If you don't really know whether your xenix is old
-enough to have a broken system call, use the default answer.
-
-EOM
- dflt=y
- case "$d_uname" in
- "$define") dflt=n;;
- esac
- rp='Is your uname() broken?'
- . ./myread
- case "$ans" in
- n*) d_uname="$define"; call=uname;;
- esac
- else
- echo 'uname() found.' >&4
- d_uname="$define"
- call=uname
- fi
-fi
-case "$d_gethname" in
-'') d_gethname="$undef";;
-esac
-case "$d_uname" in
-'') d_uname="$undef";;
-esac
-case "$d_phostname" in
-'') d_phostname="$undef";;
-esac
-
: backward compatibility for d_hvfork
if test X$d_hvfork != X; then
d_vfork="$d_hvfork"
set fpos_t fpostype long stdio.h sys/types.h
eval $typedef_ask
-: get csh whereabouts
-case "$csh" in
-'csh') val="$undef" ;;
-*) val="$define" ;;
-esac
-set d_csh
-eval $setvar
-: Respect a hint or command line value for full_csh.
-case "$full_csh" in
-'') full_csh=$csh ;;
-esac
-
: Store the full pathname to the sed program for use in the C program
full_sed=$sed
fi
$rm -f foo* bar*
-: see if sys/select.h has to be included
-set sys/select.h i_sysselct
-eval $inhdr
-
-: see if we should include time.h, sys/time.h, or both
-echo " "
-if test "X$timeincl" = X; then
- echo "Testing to see if we should include <time.h>, <sys/time.h> or both." >&4
- $echo $n "I'm now running the test program...$c"
- $cat >try.c <<'EOCP'
-#include <sys/types.h>
-#ifdef I_TIME
-#include <time.h>
-#endif
-#ifdef I_SYSTIME
-#ifdef SYSTIMEKERNEL
-#define KERNEL
-#endif
-#include <sys/time.h>
-#endif
-#ifdef I_SYSSELECT
-#include <sys/select.h>
-#endif
-main()
-{
- struct tm foo;
-#ifdef S_TIMEVAL
- struct timeval bar;
-#endif
-#ifdef S_TIMEZONE
- struct timezone tzp;
-#endif
- if (foo.tm_sec == foo.tm_sec)
- exit(0);
-#ifdef S_TIMEVAL
- if (bar.tv_sec == bar.tv_sec)
- exit(0);
-#endif
- exit(1);
-}
-EOCP
- flags=''
- for s_timezone in '-DS_TIMEZONE' ''; do
- sysselect=''
- for s_timeval in '-DS_TIMEVAL' ''; do
- for i_systimek in '' '-DSYSTIMEKERNEL'; do
- for i_time in '' '-DI_TIME'; do
- for i_systime in '-DI_SYSTIME' ''; do
- case "$flags" in
- '') $echo $n ".$c"
- set try $i_time $i_systime $i_systimek $sysselect $s_timeval $s_timezone
- if eval $compile; then
- set X $i_time $i_systime $i_systimek $sysselect $s_timeval
- shift
- flags="$*"
- echo " "
- $echo $n "Succeeded with $flags$c"
- fi
- ;;
- esac
- done
- done
- done
- done
- done
- timeincl=''
- echo " "
- case "$flags" in
- *SYSTIMEKERNEL*) i_systimek="$define"
- timeincl=`./findhdr sys/time.h`
- echo "We'll include <sys/time.h> with KERNEL defined." >&4;;
- *) i_systimek="$undef";;
- esac
- case "$flags" in
- *I_TIME*) i_time="$define"
- timeincl=`./findhdr time.h`" $timeincl"
- echo "We'll include <time.h>." >&4;;
- *) i_time="$undef";;
- esac
- case "$flags" in
- *I_SYSTIME*) i_systime="$define"
- timeincl=`./findhdr sys/time.h`" $timeincl"
- echo "We'll include <sys/time.h>." >&4;;
- *) i_systime="$undef";;
- esac
- $rm -f try.c try
-fi
-
-: check for fd_set items
-$cat <<EOM
-
-Checking to see how well your C compiler handles fd_set and friends ...
-EOM
-$cat >fd_set.c <<EOCP
-#$i_systime I_SYS_TIME
-#$i_sysselct I_SYS_SELECT
-#$d_socket HAS_SOCKET
-#include <sys/types.h>
-#ifdef HAS_SOCKET
-#include <sys/socket.h> /* Might include <sys/bsdtypes.h> */
-#endif
-#ifdef I_SYS_TIME
-#include <sys/time.h>
-#endif
-#ifdef I_SYS_SELECT
-#include <sys/select.h>
-#endif
-main() {
- fd_set fds;
-
-#ifdef TRYBITS
- if(fds.fds_bits);
-#endif
-
-#if defined(FD_SET) && defined(FD_CLR) && defined(FD_ISSET) && defined(FD_ZERO)
- exit(0);
-#else
- exit(1);
-#endif
-}
-EOCP
-set fd_set -DTRYBITS
-if eval $compile; then
- d_fds_bits="$define"
- d_fd_set="$define"
- echo "Well, your system knows about the normal fd_set typedef..." >&4
- if ./fd_set; then
- echo "and you have the normal fd_set macros (just as I'd expect)." >&4
- d_fd_macros="$define"
- else
- $cat >&4 <<'EOM'
-but not the normal fd_set macros! Gaaack! I'll have to cover for you.
-EOM
- d_fd_macros="$undef"
- fi
-else
- $cat <<'EOM'
-Hmm, your compiler has some difficulty with fd_set. Checking further...
-EOM
- set fd_set
- if eval $compile; then
- d_fds_bits="$undef"
- d_fd_set="$define"
- echo "Well, your system has some sort of fd_set available..." >&4
- if ./fd_set; then
- echo "and you have the normal fd_set macros." >&4
- d_fd_macros="$define"
- else
- $cat <<'EOM'
-but not the normal fd_set macros! Gross! More work for me...
-EOM
- d_fd_macros="$undef"
- fi
- else
- echo "Well, you got zip. That's OK, I can roll my own fd_set stuff." >&4
- d_fd_set="$undef"
- d_fds_bits="$undef"
- d_fd_macros="$undef"
- fi
-fi
-$rm -f fd_set*
-
: check for type of arguments to select.
case "$selecttype" in
'') case "$d_select" in
generates pod documentation for Config.pm from this file--please try to keep
the formatting regular.]
-Mcc (Loc.U):
- This variable is be used internally by Configure to determine the
- full pathname (if any) of the Mcc program. After Configure runs,
- the value is reset to a plain "Mcc" and is not useful.
-
_a (Unix.U):
This variable defines the extension used for ordinary libraries.
For unix, it is '.a'. The '.' is included. Other possible
This variable is the same as the archlib variable, but is
filename expanded at configuration time, for convenient use.
+archname64 (use64bits.U):
+ This variable is used for the 64-bitness part of $archname.
+
archname (archname.U):
This variable is a short name to characterize the current
architecture. It is used mainly to construct the default archlib.
processor. It is up to the Makefile to use it.
cpplast (cppstdin.U):
- This variable has the same functionality as cppminus, only it applies to
- cpprun and not cppstdin.
+ This variable has the same functionality as cppminus, only it applies
+ to cpprun and not cppstdin.
cppminus (cppstdin.U):
This variable contains the second part of the string which will invoke
the C preprocessor on the standard input and produce to standard
- output. This variable will have the value "-" if cppstdin needs a minus
- to specify standard input, otherwise the value is "".
+ output. This variable will have the value "-" if cppstdin needs
+ a minus to specify standard input, otherwise the value is "".
cpprun (cppstdin.U):
This variable contains the command which will invoke a C preprocessor
full pathname (if any) of the csh program. After Configure runs,
the value is reset to a plain "csh" and is not useful.
-d_Gconvert (d_gconvert.U):
- This variable holds what Gconvert is defined as to convert
- floating point numbers into strings. It could be 'gconvert'
- or a more complex macro emulating gconvert with gcvt() or sprintf.
-
d_access (d_access.U):
This variable conditionally defines HAS_ACCESS if the access() system
call is available to check for access permissions using real IDs.
+d_accessx (d_accessx.U):
+ This variable conditionally defines the HAS_ACCESSX symbol, which
+ indicates to the C program that the accessx() routine is available.
+
d_alarm (d_alarm.U):
This variable conditionally defines the HAS_ALARM symbol, which
indicates to the C program that the alarm() routine is available.
header files provide DBL_DIG, which is the number of significant
digits in a double precision number.
+d_dbmclose64 (dbm64.U):
+ This variable conditionally defines the HAS_DBMCLOSE64 symbol, which
+ indicates to the C program that the dbmclose64() routine is available.
+
+d_dbminit64 (dbm64.U):
+ This variable conditionally defines the HAS_DBMINIT64 symbol, which
+ indicates to the C program that the dbminit64() routine is available.
+
+d_delete64 (dbm64.U):
+ This variable conditionally defines the HAS_DELETE64 symbol, which
+ indicates to the C program that the delete64() routine is available.
+
d_difftime (d_difftime.U):
This variable conditionally defines the HAS_DIFFTIME symbol, which
indicates to the C program that the difftime() routine is available.
+d_dirent64s (io64.U):
+ This symbol will be defined if the C compiler supports struct dirent64.
+
d_dirnamlen (i_dirent.U):
This variable conditionally defines DIRNAMLEN, which indicates
to the C program that the length of directory entry names is
tells the C program that it should insert setuid emulation code
on hosts which have setuid #! scripts disabled.
+d_drand48proto (d_drand48proto.U):
+ This variable conditionally defines the HAS_DRAND48_PROTO symbol,
+ which indicates to the C program that the system provides
+ a prototype for the drand48() function. Otherwise, it is
+ up to the program to supply one.
+
d_dup2 (d_dup2.U):
This variable conditionally defines HAS_DUP2 if dup2() is
available to duplicate file descriptors.
+d_eaccess (d_eaccess.U):
+ This variable conditionally defines the HAS_EACCESS symbol, which
+ indicates to the C program that the eaccess() routine is available.
+
d_endgrent (d_endgrent.U):
This variable conditionally defines the HAS_ENDGRENT symbol, which
indicates to the C program that the endgrent() routine is available
a half-fast job and neglected to provide the macros to manipulate
an fd_set, HAS_FDS_BITS will let us know how to fix the gaffe.
+d_fetch64 (dbm64.U):
+ This variable conditionally defines the HAS_FETCH64 symbol, which
+ indicates to the C program that the fetch64() routine is available.
+
+d_fgetpos64 (stdio64.U):
+ This variable conditionally defines the HAS_FGETPOS64 symbol, which
+ indicates to the C program that the fgetpos64() routine is available.
+
d_fgetpos (d_fgetpos.U):
This variable conditionally defines HAS_FGETPOS if fgetpos() is
available to get the file position indicator.
+d_firstkey64 (dbm64.U):
+ This variable conditionally defines the HAS_FIRSTKEY64 symbol, which
+ indicates to the C program that the firstkey64() routine is available.
+
d_flexfnam (d_flexfnam.U):
This variable conditionally defines the FLEXFILENAMES symbol, which
indicates that the system supports filenames longer than 14 characters.
+d_flock64s (io64.U):
+ This symbol will be defined if the C compiler supports struct flock64.
+
d_flock (d_flock.U):
This variable conditionally defines HAS_FLOCK if flock() is
available to do file locking.
+d_fopen64 (stdio64.U):
+ This variable conditionally defines the HAS_FOPEN64 symbol, which
+ indicates to the C program that the fopen64() routine is available.
+
d_fork (d_fork.U):
This variable conditionally defines the HAS_FORK symbol, which
indicates to the C program that the fork() routine is available.
to determine file-system related limits and options associated
with a given open file descriptor.
+d_freopen64 (stdio64.U):
+ This variable conditionally defines the HAS_FREOPEN64 symbol, which
+ indicates to the C program that the freopen64() routine is available.
+
+d_fseek64 (stdio64.U):
+ This variable conditionally defines the HAS_FSEEK64 symbol, which
+ indicates to the C program that the fseek64() routine is available.
+
+d_fseeko64 (stdio64.U):
+ This variable conditionally defines the HAS_FSEEKO64 symbol, which
+ indicates to the C program that the fseeko64() routine is available.
+
+d_fseeko (d_fseeko.U):
+ This variable conditionally defines the HAS_FSEEKO symbol, which
+ indicates to the C program that the fseeko() routine is available.
+
+d_fsetpos64 (stdio64.U):
+ This variable conditionally defines the HAS_FSETPOS64 symbol, which
+ indicates to the C program that the fsetpos64() routine is available.
+
d_fsetpos (d_fsetpos.U):
This variable conditionally defines HAS_FSETPOS if fsetpos() is
available to set the file position indicator.
+d_fstat64 (io64.U):
+ This variable conditionally defines the HAS_FSTAT64 symbol, which
+ indicates to the C program that the fstat64() routine is available.
+
+d_ftell64 (stdio64.U):
+ This variable conditionally defines the HAS_FTELL64 symbol, which
+ indicates to the C program that the ftell64() routine is available.
+
+d_ftello64 (stdio64.U):
+ This variable conditionally defines the HAS_FTELLO64 symbol, which
+ indicates to the C program that the ftello64() routine is available.
+
+d_ftello (d_ftello.U):
+ This variable conditionally defines the HAS_FTELLO symbol, which
+ indicates to the C program that the ftello() routine is available.
+
d_ftime (d_ftime.U):
This variable conditionally defines the HAS_FTIME symbol, which indicates
that the ftime() routine exists. The ftime() routine is basically
a sub-second accuracy clock.
+d_ftruncate64 (io64.U):
+ This variable conditionally defines the HAS_FTRUNCATE64 symbol, which
+ indicates to the C program that the ftruncate64() routine is available.
+
+d_Gconvert (d_gconvert.U):
+ This variable holds what Gconvert is defined as to convert
+ floating point numbers into strings. It could be 'gconvert'
+ or a more complex macro emulating gconvert with gcvt() or sprintf.
+ Possible values are:
+ d_Gconvert='gconvert((x),(n),(t),(b))'
+ d_Gconvert='gcvt((x),(n),(b))'
+ d_Gconvert='sprintf((b),"%.*g",(n),(x))'
+
d_getgrent (d_getgrent.U):
This variable conditionally defines the HAS_GETGRENT symbol, which
indicates to the C program that the getgrent() routine is available
indicates to the C program that the inet_aton() function is available
to parse IP address "dotted-quad" strings.
+d_ino64t (io64.U):
+ This symbol will be defined if the C compiler supports ino64_t.
+
+d_int64t (i_inttypes.U):
+ This symbol will be defined if the C compiler supports int64_t.
+
d_isascii (d_isascii.U):
This variable conditionally defines the HAS_ISASCII constant,
which indicates to the C program that isascii() is available.
This variable conditionally defines HAS_LOCALECONV if localeconv() is
available for numeric and monetary formatting conventions.
+d_lockf64 (io64.U):
+ This variable conditionally defines the HAS_LOCKF64 symbol, which
+ indicates to the C program that the lockf64() routine is available.
+
d_lockf (d_lockf.U):
This variable conditionally defines HAS_LOCKF if lockf() is
available to do file locking.
This variable conditionally defines HAS_LONG_LONG if
the long long type is supported.
+d_lseek64 (io64.U):
+ This variable conditionally defines the HAS_LSEEK64 symbol, which
+ indicates to the C program that the lseek64() routine is available.
+
+d_lstat64 (io64.U):
+ This variable conditionally defines the HAS_LSTAT64 symbol, which
+ indicates to the C program that the lstat64() routine is available.
+
d_lstat (d_lstat.U):
This variable conditionally defines HAS_LSTAT if lstat() is
available to do file stats on symbolic links.
of the source want to take special action if MYMALLOC is used.
This may include different sorts of profiling or error detection.
+d_nextkey64 (dbm64.U):
+ This variable conditionally defines the HAS_NEXTKEY64 symbol, which
+ indicates to the C program that the nextkey64() routine is available.
+
d_nice (d_nice.U):
This variable conditionally defines the HAS_NICE symbol, which
indicates to the C program that the nice() routine is available.
+d_off64t (io64.U):
+ This symbol will be defined if the C compiler supports off64_t.
+
d_oldpthreads (usethreads.U):
This variable conditionally defines the OLD_PTHREADS_API symbol,
and indicates that Perl should be built to use the old
which indicates to the C program that the 3 argument version of
the open(2) function is available.
+d_open64 (io64.U):
+ This variable conditionally defines the HAS_OPEN64 symbol, which
+ indicates to the C program that the open64() routine is available.
+
+d_opendir64 (io64.U):
+ This variable conditionally defines the HAS_OPENDIR64 symbol, which
+ indicates to the C program that the opendir64() routine is available.
+
d_pathconf (d_pathconf.U):
This variable conditionally defines the HAS_PATHCONF symbol, which
indicates to the C program that the pathconf() routine is available
indicates to the C program that it should not assume that it is
running on the machine it was compiled on.
+d_pthread_create_joinable (d_pthrattrj.U):
+ This variable conditionally defines pthread_create_joinable.
+ undef if pthread.h defines PTHREAD_CREATE_JOINABLE.
+
d_pthread_yield (d_pthread_y.U):
This variable conditionally defines the HAS_PTHREAD_YIELD
symbol if the pthread_yield routine is available to yield
the execution of the current thread.
-d_pthreads_created_joinable (d_pthreadj.U):
- This variable conditionally defines the PTHREADS_CREATED_JOINABLE
- symbol if pthreads are created in the joinable (aka undetached)
- state.
-
d_pwage (i_pwd.U):
This variable conditionally defines PWAGE, which indicates
that struct passwd contains pw_age.
This variable conditionally defines PWQUOTA, which indicates
that struct passwd contains pw_quota.
+d_readdir64 (io64.U):
+ This variable conditionally defines the HAS_READDIR64 symbol, which
+ indicates to the C program that the readdir64() routine is available.
+
d_readdir (d_readdir.U):
This variable conditionally defines HAS_READDIR if readdir() is
available to read directory entries.
symbol if the sched_yield routine is available to yield
the execution of the current thread.
+d_seekdir64 (io64.U):
+ This variable conditionally defines the HAS_SEEKDIR64 symbol, which
+ indicates to the C program that the seekdir64() routine is available.
+
d_seekdir (d_readdir.U):
This variable conditionally defines HAS_SEEKDIR if seekdir() is
available.
This variable conditionally defines the HAS_SOCKETPAIR symbol, which
indicates that the BSD socketpair() is supported.
+d_stat64 (io64.U):
+ This variable conditionally defines the HAS_STAT64 symbol, which
+ indicates to the C program that the stat64() routine is available.
+
d_statblks (d_statblks.U):
- This variable conditionally defines USE_STAT_BLOCKS if this system
- has a stat structure declaring st_blksize and st_blocks.
+ This variable conditionally defines USE_STAT_BLOCKS
+ if this system has a stat structure declaring
+ st_blksize and st_blocks.
d_stdio_cnt_lval (d_stdstdio.U):
This variable conditionally defines STDIO_CNT_LVALUE if the
has a FILE structure declaring usable _ptr and _cnt fields (or
equivalent) in stdio.h.
+d_store64 (dbm64.U):
+ This variable conditionally defines the HAS_STORE64 symbol, which
+ indicates to the C program that the store64() routine is available.
+
d_strchr (d_strchr.U):
This variable conditionally defines HAS_STRCHR if strchr() and
strrchr() are available for string searching.
indicates to the C program that the tcsetpgrp() routine is available
to set foreground process group ID.
+d_telldir64 (io64.U):
+ This variable conditionally defines the HAS_TELLDIR64 symbol, which
+ indicates to the C program that the telldir64() routine is available.
+
d_telldir (d_readdir.U):
This variable conditionally defines HAS_TELLDIR if telldir() is
available.
that the times() routine exists. The times() routine is normaly
provided on UNIX systems. You may have to include <sys/times.h>.
+d_tmpfile64 (stdio64.U):
+ This variable conditionally defines the HAS_TMPFILE64 symbol, which
+ indicates to the C program that the tmpfile64() routine is available.
+
+d_truncate64 (io64.U):
+ This variable conditionally defines the HAS_TRUNCATE64 symbol, which
+ indicates to the C program that the truncate64() routine is available.
+
d_truncate (d_truncate.U):
This variable conditionally defines HAS_TRUNCATE if truncate() is
available to truncate files.
This variable contains the value of the DOUBLESIZE symbol, which
indicates to the C program how many bytes there are in a double.
+drand01 (randfunc.U):
+ Indicates the macro to be used to generate normalized
+ random numbers. Uses randfunc, often divided by
+ (double) (((unsigned long) 1 << randbits)) in order to
+ normalize the result.
+ In C programs, the macro 'Drand01' is mapped to drand01.
+
dynamic_ext (Extensions.U):
This variable holds a list of XS extension files we want to
link dynamically into the package. It is used by Makefile.
is available.
find (Loc.U):
- This variable is be used internally by Configure to determine the
- full pathname (if any) of the find program. After Configure runs,
- the value is reset to a plain "find" and is not useful.
+ This variable is defined but not used by Configure.
+ The value is a plain '' and is not useful.
firstmakefile (Unix.U):
This variable defines the first file searched by make. On unix,
This variable conditionally defines the I_GRP symbol, and indicates
whether a C program should include <grp.h>.
+i_inttypes (i_inttypes.U):
+ This variable conditionally defines the I_INTTYPES symbol,
+ and indicates whether a C program should include <inttypes.h>.
+
i_limits (i_limits.U):
This variable conditionally defines the I_LIMITS symbol, and indicates
whether a C program may include <limits.h> to get symbols like WORD_BIT
This variable conditionally defines the I_LOCALE symbol,
and indicates whether a C program should include <locale.h>.
+i_machcthr (i_machcthr.U):
+ This variable conditionally defines the I_MACH_CTHREADS symbol,
+ and indicates whether a C program should include <mach/cthreads.h>.
+
i_malloc (i_malloc.U):
This variable conditionally defines the I_MALLOC symbol, and indicates
whether a C program should include <malloc.h>.
This variable conditionally defines the I_STRING symbol, which
indicates that <string.h> should be included rather than <strings.h>.
+i_sysaccess (i_sysaccess.U):
+ This variable conditionally defines the I_SYS_ACCESS symbol,
+ and indicates whether a C program should include <sys/access.h>.
+
i_sysdir (i_sysdir.U):
This variable conditionally defines the I_SYS_DIR symbol, and indicates
whether a C program should include <sys/dir.h>.
This variable conditionally defines the I_SYS_RESOURCE symbol,
and indicates whether a C program should include <sys/resource.h>.
+i_syssecrt (i_syssecrt.U):
+ This variable conditionally defines the I_SYS_SECURITY symbol,
+ and indicates whether a C program should include <sys/security.h>.
+
i_sysselct (i_sysselct.U):
This variable conditionally defines I_SYS_SELECT, which indicates
to the C program that it should include <sys/select.h> in order to
This variable conditionally defines the I_VFORK symbol, and indicates
whether a C program should include vfork.h.
+ignore_versioned_solibs (libs.U):
+ This variable should be non-empty if non-versioned shared
+ libraries (libfoo.so.x.y) are to be ignored (because they
+ cannot be linked against).
+
incpath (usrinc.U):
This variable must preceed the normal include path to get hte
right one, as in "$incpath/usr/include" or "$incpath/usr/lib".
ahead of ucb or bsd libraries for SVR4.
line (Loc.U):
- This variable is be used internally by Configure to determine the
- full pathname (if any) of the line program. After Configure runs,
- the value is reset to a plain "line" and is not useful.
+ This variable is defined but not used by Configure.
+ The value is a plain '' and is not useful.
lint (Loc.U):
This variable is defined but not used by Configure.
full pathname (if any) of the ls program. After Configure runs,
the value is reset to a plain "ls" and is not useful.
+lseeksize (lseektype.U):
+ This variable defines lseektype to be something like off_t, long,
+ or whatever type is used to declare lseek offset's type in the
+ kernel (which also appears to be lseek's return type).
+
lseektype (lseektype.U):
This variable defines lseektype to be something like off_t, long,
or whatever type is used to declare lseek offset's type in the
have: one of 'n', 'l', or '3'. The Makefile must supply the '.'.
See man3dir.
+Mcc (Loc.U):
+ This variable is be used internally by Configure to determine the
+ full pathname (if any) of the Mcc program. After Configure runs,
+ the value is reset to a plain "Mcc" and is not useful.
+
medium (models.U):
This variable contains a flag which will tell the C compiler and loader
to produce a program running with a medium memory model. If the
used to separate elements in the command shell search PATH.
perl (Loc.U):
- This variable is be used internally by Configure to determine the
- full pathname (if any) of the perl program. After Configure runs,
- the value is reset to a plain "perl" and is not useful.
+ This variable is defined but not used by Configure.
+ The value is a plain '' and is not useful.
perladmin (perladmin.U):
Electronic mail address of the perl5 administrator.
This variable holds the eventual value of CAN_PROTOTYPE, which
indicates the C compiler can handle funciton prototypes.
+pthread_create_joinable (d_pthrattrj.U):
+ This variable defines the constant to use for creating joinable
+ (aka undetached) pthreads. Unused if pthread.h defines
+ PTHREAD_CREATE_JOINABLE. If used, possible values are
+ PTHREAD_CREATE_UNDETACHED and __UNDETACHED.
+
ptrsize (ptrsize.U):
This variable contains the value of the PTRSIZE symbol, which
indicates to the C program how many bytes there are in a pointer.
-randbits (randbits.U):
- This variable contains the eventual value of the RANDBITS symbol,
- which indicates to the C program how many bits of random number
- the rand() function produces.
+randbits (randfunc.U):
+ Indicates how many bits are produced by the function used to
+ generate normalized random numbers.
+
+randfunc (randfunc.U):
+ Indicates the name of the random number function to use.
+ Values include drand48, random, and rand. In C programs,
+ the 'Drand01' macro is defined to generate uniformly distributed
+ random numbers over the range [0., 1.[ (see drand01 and nrand).
+
+randseedtype (randfunc.U):
+ Indicates the type of the argument of the seedfunc.
ranlib (orderlib.U):
This variable is set to the pathname of the ranlib program, if it is
nm extraction should be performed or not, according to the value
of usenm and the flags on the Configure command line.
+sched_yield (d_pthread_y.U):
+ This variable defines the way to yield the execution
+ of the current thread.
+
scriptdir (scriptdir.U):
This variable holds the name of the directory in which the user wants
to put publicly scripts for the package in question. It is either
full pathname (if any) of the sed program. After Configure runs,
the value is reset to a plain "sed" and is not useful.
+seedfunc (randfunc.U):
+ Indicates the random number generating seed function.
+ Values include srand48, srandom, and srand.
+
+selectminbits (selectminbits.U):
+ This variable holds the minimum number of bits operated by select.
+ That is, if you do select(n, ...), how many bits at least will be
+ cleared in the masks if some activity is detected. Usually this
+ is either n or 32*ceil(n/32), especially many little-endians do
+ the latter. This is only useful if you have select(), naturally.
+
selecttype (selecttype.U):
This variable holds the type used for the 2nd, 3rd, and 4th
arguments to select. Usually, this is 'fd_set *', if HAS_FD_SET
have select(), naturally.
sendmail (Loc.U):
- This variable is be used internally by Configure to determine the
- full pathname (if any) of the sendmail program. After Configure runs,
- the value is reset to a plain "sendmail" and is not useful.
+ This variable is defined but not used by Configure.
+ The value is a plain '' and is not useful.
sh (sh.U):
This variable contains the full pathname of the shell used
is removed. See sig_num.
sig_num (sig_name.U):
- This variable holds the signal numbers, comma separated. A 0 is
+ This variable holds the signal numbers, space separated. A ZERO is
prepended to the list (corresponding to the fake SIGZERO), and
the list is terminated with a 0. Those numbers correspond to
the value of the signal listed in the same place within the
sig_name list.
+sig_num_init (sig_name.U):
+ This variable holds the signal numbers, enclosed in double quotes and
+ separated by commas, suitable for use in the SIG_NUM definition
+ below. A "ZERO" is prepended to the list, and the list is
+ terminated with a plain 0.
+
signal_t (d_voidsig.U):
This variable holds the type of the signal handler (void or int).
full pathname (if any) of the uniq program. After Configure runs,
the value is reset to a plain "uniq" and is not useful.
+use64bits (use64bits.U):
+ This variable conditionally defines the USE_64_BITS symbol,
+ and indicates that explicit 64-bit interfaces should be used
+ when available.
+
usedl (dlsrc.U):
This variable indicates if the the system supports dynamic
loading of some sort. See also dlsrc and dlobj.
+usemultiplicity (usemultiplicity.U):
+ This variable conditionally defines the MULTIPLICITY symbol,
+ and indicates that Perl should be built to use multiplicity.
+
usemymalloc (mallocsrc.U):
This variable contains y if the malloc that comes with this package
is desired over the system's version of malloc. People often include
# Package name : perl5
# Source directory : .
-# Configuration time: Fri Sep 25 03:42:43 EDT 1998
-# Configured by : gsar
-# Target system : sunos 5.5.1 generic_103640-01 sun4m sparc sunw,sparcstation-20
+# Configuration time: Thu Nov 5 12:26:24 EET 1998
+# Configured by : jhi
+# Target system : osf1 alpha.hut.fi v4.0 878 alpha
Author=''
Date='$Date'
_a='.a'
_exe=''
_o='.o'
-afs='true'
+afs='false'
alignbytes='8'
ansi2knr=''
aphostname=''
-apiversion='5.00552'
+apiversion='5.00553'
ar='ar'
-archlib='/l1/packages/gsperl/lib/5.00552/sun4-solaris-thread'
-archlibexp='/l1/packages/gsperl/lib/5.00552/sun4-solaris-thread'
-archname='sun4-solaris-thread'
+archlib='/opt/perl/lib/5.00553/alpha-dec_osf-thread'
+archlibexp='/opt/perl/lib/5.00553/alpha-dec_osf-thread'
+archname64=''
+archname='alpha-dec_osf-thread'
archobjs=''
awk='awk'
baserev='5.0'
bash=''
-bin='/l1/packages/gsperl/bin'
-binexp='/l1/packages/gsperl/bin'
+bin='/opt/perl/bin'
+binexp='/opt/perl/bin'
bison=''
byacc='byacc'
-byteorder='4321'
+byteorder='12345678'
c='\c'
castflags='0'
cat='cat'
-cc='gcc'
-cccdlflags='-fPIC'
+cc='cc'
+cccdlflags=' '
ccdlflags=' '
-ccflags='-D_REENTRANT -DDEBUGGING'
-cf_by='gsar'
+ccflags='-pthread -std -D__LANGUAGE_C__'
+cf_by='jhi'
cf_email='yourname@yourhost.yourplace.com'
-cf_time='Fri Sep 25 03:42:43 EDT 1998'
+cf_time='Thu Nov 5 12:26:24 EET 1998'
chgrp=''
chmod=''
chown=''
cpio=''
cpp='cpp'
cpp_stuff='42'
-cppflags='-D_REENTRANT -DDEBUGGING'
-cpplast='-'
-cppminus='-'
-cpprun='gcc -E'
-cppstdin='gcc -E'
+cppflags='-pthread -std -D__LANGUAGE_C__'
+cpplast=''
+cppminus=''
+cpprun='/usr/bin/cpp'
+cppstdin='cppstdin'
cryptlib=''
csh='csh'
-d_Gconvert='gconvert((x),(n),(t),(b))'
+d_Gconvert='gcvt((x),(n),(b))'
d_access='define'
d_accessx='undef'
d_alarm='define'
d_archlib='define'
-d_attribut='define'
+d_attribut='undef'
d_bcmp='define'
d_bcopy='define'
-d_bsd='define'
+d_bsd='undef'
d_bsdgetpgrp='undef'
-d_bsdsetpgrp='undef'
+d_bsdsetpgrp='define'
d_bzero='define'
-d_casti32='define'
+d_casti32='undef'
d_castneg='define'
d_charvspr='undef'
d_chown='define'
d_delete64='undef'
d_difftime='define'
d_dirent64s='undef'
-d_dirnamlen='undef'
+d_dirnamlen='define'
d_dlerror='define'
d_dlopen='define'
d_dlsymun='undef'
d_dosuid='undef'
+d_drand48proto='define'
d_dup2='define'
d_eaccess='undef'
d_endgrent='define'
d_firstkey64='undef'
d_flexfnam='define'
d_flock64s='undef'
-d_flock='undef'
+d_flock='define'
d_fopen64='undef'
d_fork='define'
d_fpathconf='define'
d_gethbyaddr='define'
d_gethbyname='define'
d_gethent='define'
-d_gethname='undef'
+d_gethname='define'
d_gethostprotos='define'
d_getlogin='define'
d_getnbyaddr='define'
d_grpasswd='define'
d_htonl='define'
d_index='undef'
-d_inetaton='undef'
+d_inetaton='define'
d_ino64t='undef'
d_int64t='undef'
d_isascii='define'
d_msgget='define'
d_msgrcv='define'
d_msgsnd='define'
-d_mymalloc='define'
+d_mymalloc='undef'
d_nextkey64='undef'
d_nice='define'
d_off64t='undef'
d_pipe='define'
d_poll='define'
d_portable='define'
+d_pthread_create_joinable='undef'
d_pthread_yield='undef'
-d_pthreads_created_joinable='define'
-d_pwage='define'
+d_pwage='undef'
d_pwchange='undef'
d_pwclass='undef'
d_pwcomment='define'
d_pwexpire='undef'
d_pwgecos='define'
d_pwpasswd='define'
-d_pwquota='undef'
+d_pwquota='define'
d_readdir64='undef'
d_readdir='define'
d_readlink='define'
d_select='define'
d_sem='define'
d_semctl='define'
-d_semctl_semid_ds='undef'
+d_semctl_semid_ds='define'
d_semctl_semun='define'
d_semget='define'
d_semop='define'
d_setresgid='undef'
d_setresuid='undef'
d_setreuid='define'
-d_setrgid='undef'
-d_setruid='undef'
+d_setrgid='define'
+d_setruid='define'
d_setsent='define'
d_setsid='define'
d_setvbuf='define'
d_strtol='define'
d_strtoul='define'
d_strxfrm='define'
-d_suidsafe='define'
+d_suidsafe='undef'
d_symlink='define'
d_syscall='define'
d_sysconf='define'
d_truncate='define'
d_tzname='define'
d_umask='define'
-d_uname='define'
+d_uname='undef'
d_union_semun='undef'
d_vfork='undef'
d_void_closedir='undef'
dlext='so'
dlsrc='dl_dlopen.xs'
doublesize='8'
-dynamic_ext='B Data/Dumper Fcntl IO IPC/SysV NDBM_File ODBM_File Opcode POSIX SDBM_File Socket Thread attrs re'
+drand01='drand48()'
+dynamic_ext='B DB_File Data/Dumper Fcntl IO IPC/SysV NDBM_File ODBM_File Opcode POSIX SDBM_File Socket Thread attrs re'
eagain='EAGAIN'
ebcdic='undef'
echo='echo'
eunicefix=':'
exe_ext=''
expr='expr'
-extensions='B Data/Dumper Fcntl IO IPC/SysV NDBM_File ODBM_File Opcode POSIX SDBM_File Socket Thread attrs re Errno'
-find='find'
+extensions='B DB_File Data/Dumper Fcntl IO IPC/SysV NDBM_File ODBM_File Opcode POSIX SDBM_File Socket Thread attrs re Errno'
+find=''
firstmakefile='makefile'
flex=''
fpostype='fpos_t'
freetype='void'
full_csh='/usr/bin/csh'
full_sed='/usr/bin/sed'
-gccversion='2.8.1'
+gccversion=''
gidtype='gid_t'
-glibpth='/usr/shlib /shlib /lib/pa1.1 /usr/lib/large /lib /usr/lib /usr/lib/386 /lib/386 /lib/large /usr/lib/small /lib/small /usr/ccs/lib /usr/local/lib'
+glibpth='/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib'
grep='grep'
groupcat='cat /etc/group'
groupstype='gid_t'
gzip='gzip'
-h_fcntl='true'
-h_sysfile='false'
+h_fcntl='false'
+h_sysfile='true'
hint='recommended'
hostcat='cat /etc/hosts'
huge=''
i_arpainet='define'
i_bsdioctl=''
-i_db='undef'
-i_dbm='undef'
+i_db='define'
+i_dbm='define'
i_dirent='define'
i_dld='undef'
i_dlfcn='define'
-i_fcntl='define'
+i_fcntl='undef'
i_float='define'
i_gdbm='undef'
i_grp='define'
i_inttypes='undef'
i_limits='define'
i_locale='define'
+i_machcthr='undef'
i_malloc='define'
i_math='define'
i_memory='undef'
i_neterrno='undef'
i_niin='define'
i_pwd='define'
-i_rpcsvcdbm='define'
+i_rpcsvcdbm='undef'
i_sfio='undef'
i_sgtty='undef'
i_stdarg='define'
i_stddef='define'
i_stdlib='define'
i_string='define'
-i_sysaccess='undef'
-i_sysdir='undef'
-i_sysfile='undef'
-i_sysfilio='define'
+i_sysaccess='define'
+i_sysdir='define'
+i_sysfile='define'
+i_sysfilio='undef'
i_sysin='undef'
i_sysioctl='define'
i_sysndir='undef'
i_sysparam='define'
i_sysresrc='define'
-i_syssecrt='undef'
+i_syssecrt='define'
i_sysselct='define'
i_syssockio=''
i_sysstat='define'
i_varargs='undef'
i_varhdr='stdarg.h'
i_vfork='undef'
+ignore_versioned_solibs=''
incpath=''
inews=''
-installarchlib='/l1/packages/gsperl/lib/5.00552/sun4-solaris-thread'
-installbin='/l1/packages/gsperl/bin'
-installman1dir='/l1/packages/gsperl/man/man1'
-installman3dir='/l1/packages/gsperl/man/man3'
-installprivlib='/l1/packages/gsperl/lib/5.00552'
-installscript='/l1/packages/gsperl/bin'
-installsitearch='/l1/packages/gsperl/lib/site_perl/5.00552/sun4-solaris-thread'
-installsitelib='/l1/packages/gsperl/lib/site_perl/5.00552'
+installarchlib='/opt/perl/lib/5.00553/alpha-dec_osf-thread'
+installbin='/opt/perl/bin'
+installman1dir='/opt/perl/man/man1'
+installman3dir='/opt/perl/man/man3'
+installprivlib='/opt/perl/lib/5.00553'
+installscript='/opt/perl/bin'
+installsitearch='/opt/perl/lib/site_perl/5.00553/alpha-dec_osf-thread'
+installsitelib='/opt/perl/lib/site_perl/5.00553'
intsize='4'
known_extensions='B DB_File Data/Dumper Fcntl GDBM_File IO IPC/SysV NDBM_File ODBM_File Opcode POSIX SDBM_File Socket Thread attrs re'
ksh=''
large=''
-ld='gcc'
-lddlflags='-G -L/usr/local/lib'
-ldflags=' -L/usr/local/lib'
+ld='ld'
+lddlflags='-shared -expect_unresolved "*" -O -msym -s'
+ldflags=''
less='less'
lib_ext='.a'
-libc=''
+libc='/usr/shlib/libc.so'
libperl='libperl.a'
-libpth='/usr/local/lib /lib /usr/lib /usr/ccs/lib'
-libs='-lsocket -lnsl -ldl -lm -lposix4 -lpthread -lc'
-libswanted='sfio socket inet nsl nm ndbm gdbm dbm db dl dld sun m posix4 pthread c cposix posix ndir dir crypt bsd BSD PW x'
-line='line'
+libpth='/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /var/shlib'
+libs='-lgdbm -ldbm -ldb -lm -lpthread -lexc'
+libswanted='sfio socket inet nsl nm gdbm dbm db malloc dld ld sun m cposix posix ndir dir crypt ucb BSD x pthread exc'
+line=''
lint=''
lkflags=''
ln='ln'
lns='/usr/bin/ln -s'
locincpth='/usr/local/include /opt/local/include /usr/gnu/include /opt/gnu/include /usr/GNU/include /opt/GNU/include'
loclibpth='/usr/local/lib /opt/local/lib /usr/gnu/lib /opt/gnu/lib /usr/GNU/lib /opt/GNU/lib'
-longdblsize='16'
+longdblsize='8'
longlongsize='8'
-longsize='4'
+longsize='8'
lp=''
lpr=''
ls='ls'
-lseeksize='4'
+lseeksize='8'
lseektype='off_t'
mail=''
mailx=''
make='make'
make_set_make='#'
-mallocobj='malloc.o'
-mallocsrc='malloc.c'
+mallocobj=''
+mallocsrc=''
malloctype='void *'
-man1dir='/l1/packages/gsperl/man/man1'
-man1direxp='/l1/packages/gsperl/man/man1'
+man1dir='/opt/perl/man/man1'
+man1direxp='/opt/perl/man/man1'
man1ext='1'
-man3dir='/l1/packages/gsperl/man/man3'
-man3direxp='/l1/packages/gsperl/man/man3'
+man3dir='/opt/perl/man/man3'
+man3direxp='/opt/perl/man/man3'
man3ext='3'
medium=''
mips=''
modetype='mode_t'
more='more'
mv=''
-myarchname='sun4-solaris'
+myarchname='alpha-dec_osf'
mydomain='.yourplace.com'
myhostname='yourhost'
-myuname='sunos aatma 5.5.1 generic_103640-01 sun4m sparc sunw,sparcstation-20 '
+myuname='osf1 alpha.hut.fi v4.0 878 alpha '
n=''
netdb_hlen_type='int'
netdb_host_type='const char *'
netdb_name_type='const char *'
-netdb_net_type='long'
+netdb_net_type='int'
nm='nm'
nm_opt='-p'
nm_so_opt=''
nroff='nroff'
o_nonblock='O_NONBLOCK'
obj_ext='.o'
-optimize='-g'
+optimize='-O'
orderlib='false'
-osname='solaris'
-osvers='2.5.1'
+osname='dec_osf'
+osvers='4.0'
package='perl5'
-pager='less'
+pager='/c/bin/less'
passcat='cat /etc/passwd'
patchlevel='5'
path_sep=':'
-perl='perl'
+perl=''
perladmin='yourname@yourhost.yourplace.com'
-perlpath='/l1/packages/gsperl/bin/perl'
+perlpath='/opt/perl/bin/perl'
pg='pg'
-phostname='hostname'
+phostname=''
pidtype='pid_t'
plibpth=''
pmake=''
pr=''
-prefix='/l1/packages/gsperl'
-prefixexp='/l1/packages/gsperl'
-privlib='/l1/packages/gsperl/lib/5.00552'
-privlibexp='/l1/packages/gsperl/lib/5.00552'
+prefix='/opt/perl'
+prefixexp='/opt/perl'
+privlib='/opt/perl/lib/5.00553'
+privlibexp='/opt/perl/lib/5.00553'
prototype='define'
-ptrsize='4'
-randbits='15'
+pthread_create_joinable='0'
+ptrsize='8'
+randbits='48'
+randfunc='drand48'
+randseedtype='long'
ranlib=':'
rd_nodata='-1'
rm='rm'
rmail=''
-runnm='false'
-scriptdir='/l1/packages/gsperl/bin'
-scriptdirexp='/l1/packages/gsperl/bin'
+runnm='true'
+sched_yield='sched_yield()'
+scriptdir='/opt/perl/bin'
+scriptdirexp='/opt/perl/bin'
sed='sed'
+seedfunc='srand48'
selectminbits='32'
selecttype='fd_set *'
-sendmail='sendmail'
+sendmail=''
sh='/bin/sh'
shar=''
sharpbang='#!'
shortsize='2'
shrpenv=''
shsharp='true'
-sig_name='ZERO HUP INT QUIT ILL TRAP ABRT EMT FPE KILL BUS SEGV SYS PIPE ALRM TERM USR1 USR2 CHLD PWR WINCH URG IO STOP TSTP CONT TTIN TTOU VTALRM PROF XCPU XFSZ WAITING LWP FREEZE THAW CANCEL RTMIN NUM38 NUM39 NUM40 NUM41 NUM42 NUM43 RTMAX IOT CLD POLL '
-sig_name_init='"ZERO", "HUP", "INT", "QUIT", "ILL", "TRAP", "ABRT", "EMT", "FPE", "KILL", "BUS", "SEGV", "SYS", "PIPE", "ALRM", "TERM", "USR1", "USR2", "CHLD", "PWR", "WINCH", "URG", "IO", "STOP", "TSTP", "CONT", "TTIN", "TTOU", "VTALRM", "PROF", "XCPU", "XFSZ", "WAITING", "LWP", "FREEZE", "THAW", "CANCEL", "RTMIN", "NUM38", "NUM39", "NUM40", "NUM41", "NUM42", "NUM43", "RTMAX", "IOT", "CLD", "POLL", 0'
-sig_num='0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 6, 18, 22, 0'
+sig_name='ZERO HUP INT QUIT ILL TRAP ABRT EMT FPE KILL BUS SEGV SYS PIPE ALRM TERM IOINT STOP TSTP CONT CHLD TTIN TTOU AIO XCPU XFSZ VTALRM PROF WINCH INFO USR1 USR2 RESV RTMIN NUM34 NUM35 NUM36 NUM37 NUM38 NUM39 NUM40 NUM41 NUM42 NUM43 NUM44 NUM45 NUM46 NUM47 MAX IOT LOST URG CLD IO POLL PTY PWR RTMAX '
+sig_name_init='"ZERO", "HUP", "INT", "QUIT", "ILL", "TRAP", "ABRT", "EMT", "FPE", "KILL", "BUS", "SEGV", "SYS", "PIPE", "ALRM", "TERM", "IOINT", "STOP", "TSTP", "CONT", "CHLD", "TTIN", "TTOU", "AIO", "XCPU", "XFSZ", "VTALRM", "PROF", "WINCH", "INFO", "USR1", "USR2", "RESV", "RTMIN", "NUM34", "NUM35", "NUM36", "NUM37", "NUM38", "NUM39", "NUM40", "NUM41", "NUM42", "NUM43", "NUM44", "NUM45", "NUM46", "NUM47", "MAX", "IOT", "LOST", "URG", "CLD", "IO", "POLL", "PTY", "PWR", "RTMAX", 0'
+sig_num='0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 6 6 16 20 23 23 23 29 48 '
+sig_num_init='0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 6, 6, 16, 20, 23, 23, 23, 29, 48, 0'
signal_t='void'
-sitearch='/l1/packages/gsperl/lib/site_perl/5.00552/sun4-solaris-thread'
-sitearchexp='/l1/packages/gsperl/lib/site_perl/5.00552/sun4-solaris-thread'
-sitelib='/l1/packages/gsperl/lib/site_perl/5.00552'
-sitelibexp='/l1/packages/gsperl/lib/site_perl/5.00552'
+sitearch='/opt/perl/lib/site_perl/5.00553/alpha-dec_osf-thread'
+sitearchexp='/opt/perl/lib/site_perl/5.00553/alpha-dec_osf-thread'
+sitelib='/opt/perl/lib/site_perl/5.00553'
+sitelibexp='/opt/perl/lib/site_perl/5.00553'
sizetype='size_t'
sleep=''
smail=''
split=''
src='.'
ssizetype='ssize_t'
-startperl='#!/l1/packages/gsperl/bin/perl'
+startperl='#!/opt/perl/bin/perl'
startsh='#!/bin/sh'
static_ext=' '
stdchar='unsigned char'
stdio_ptr='((fp)->_ptr)'
strings='/usr/include/string.h'
submit=''
-subversion='52'
+subversion='53'
sysman='/usr/man/man1'
tail=''
tar=''
uidtype='uid_t'
uname='uname'
uniq='uniq'
-use64bits='undef'
+use64bits='define'
usedl='define'
-usemymalloc='y'
+usemultiplicity='undef'
+usemymalloc='n'
usenm='true'
useopcode='true'
useperlio='undef'
usevfork='false'
usrinc='/usr/include'
uuname=''
-version='5.00552'
+version='5.00553'
vi=''
voidflags='15'
xlibpth='/usr/lib/386 /lib/386'
zip='zip'
# Configure command line arguments.
config_arg0='Configure'
-config_args='-Dprefix=/opt/perl -Doptimize=-O -Dusethreads -Dcf_by=yourname -Dcf_email=yourname@yourhost.yourplace.com -Dperladmin=yourname@yourhost.yourplace.com -Dmydomain=.yourplace.com -Dmyhostname=yourhost -dE'
-config_argc=9
+config_args='-Dprefix=/opt/perl -Doptimize=-O -Dusethreads -Duse64bits -Dcf_by=yourname -Dcf_email=yourname@yourhost.yourplace.com -Dperladmin=yourname@yourhost.yourplace.com -Dmydomain=.yourplace.com -Dmyhostname=yourhost -dE'
+config_argc=10
config_arg1='-Dprefix=/opt/perl'
config_arg2='-Doptimize=-O'
config_arg3='-Dusethreads'
-config_arg4='-Dcf_by=yourname'
-config_arg5='-Dcf_email=yourname@yourhost.yourplace.com'
-config_arg6='-Dperladmin=yourname@yourhost.yourplace.com'
-config_arg7='-Dmydomain=.yourplace.com'
-config_arg8='-Dmyhostname=yourhost'
-config_arg9='-dE'
+config_arg4='-Duse64bits'
+config_arg5='-Dcf_by=yourname'
+config_arg6='-Dcf_email=yourname@yourhost.yourplace.com'
+config_arg7='-Dperladmin=yourname@yourhost.yourplace.com'
+config_arg8='-Dmydomain=.yourplace.com'
+config_arg9='-Dmyhostname=yourhost'
+config_arg10='-dE'
PATCHLEVEL=5
-SUBVERSION=52
+SUBVERSION=53
CONFIG=true
+# Variables propagated from previous config.sh file.
+pp_sys_cflags='ccflags="$ccflags -DNO_EFF_ONLY_OK"'
+/* This file (config_H) is a sample config.h file. If you are unable
+ to successfully run Configure, copy this file to config.h and
+ edit it to suit your system.
+*/
/*
* This file was produced by running the config_h.SH script, which
* gets its values from config.sh, which is generally produced by
/*
* Package name : perl5
* Source directory : .
- * Configuration time: Fri Sep 25 03:42:43 EDT 1998
- * Configured by : gsar
- * Target system : sunos aatma 5.5.1 generic_103640-01 sun4m sparc sunw,sparcstation-20
+ * Configuration time: Thu Nov 5 13:03:49 EET 1998
+ * Configured by : jhi
+ * Target system : osf1 alpha.hut.fi v4.0 878 alpha
*/
#ifndef _config_h_
* This symbol is the filename expanded version of the BIN symbol, for
* programs that do not want to deal with that at run-time.
*/
-#define BIN "/l1/packages/gsperl/bin" /**/
-#define BIN_EXP "/l1/packages/gsperl/bin" /**/
-
-/* CPPSTDIN:
- * This symbol contains the first part of the string which will invoke
- * the C preprocessor on the standard input and produce to standard
- * output. Typical value of "cc -E" or "/lib/cpp", but it can also
- * call a wrapper. See CPPRUN.
- */
-/* CPPMINUS:
- * This symbol contains the second part of the string which will invoke
- * the C preprocessor on the standard input and produce to standard
- * output. This symbol will have the value "-" if CPPSTDIN needs a minus
- * to specify standard input, otherwise the value is "".
- */
-#define CPPSTDIN "gcc -E"
-#define CPPMINUS "-"
+#define BIN "/opt/perl/bin" /**/
+#define BIN_EXP "/opt/perl/bin" /**/
/* HAS_ALARM:
* This symbol, if defined, indicates that the alarm routine is
* This symbol indicates the C compiler can check for function attributes,
* such as printf formats. This is normally only supported by GNU cc.
*/
-#define HASATTRIBUTE /**/
+/*#define HASATTRIBUTE / **/
#ifndef HASATTRIBUTE
#define __attribute__(_arg_)
#endif
* subprocesses to which it must pass the filename rather than the
* file descriptor of the script to be executed.
*/
-#define SETUID_SCRIPTS_ARE_SECURE_NOW /**/
+/*#define SETUID_SCRIPTS_ARE_SECURE_NOW / **/
/*#define DOSUID / **/
/* HAS_DUP2:
* This symbol, if defined, indicates that the flock routine is
* available to do file locking.
*/
-/*#define HAS_FLOCK / **/
+#define HAS_FLOCK /**/
/* HAS_FORK:
* This symbol, if defined, indicates that the fork routine is
*/
#define HAS_GETGROUPS /**/
+/* HAS_GETHOSTNAME:
+ * This symbol, if defined, indicates that the C program may use the
+ * gethostname() routine to derive the host name. See also HAS_UNAME
+ * and PHOSTNAME.
+ */
/* HAS_UNAME:
* This symbol, if defined, indicates that the C program may use the
* uname() routine to derive the host name. See also HAS_GETHOSTNAME
* and PHOSTNAME.
*/
-#define HAS_UNAME /**/
+/* PHOSTNAME:
+ * This symbol, if defined, indicates that the C program may use the
+ * contents of PHOSTNAME as a command to feed to the popen() routine
+ * to derive the host name. See also HAS_GETHOSTNAME and HAS_UNAME.
+ * Note that the command uses a fully qualified path, so that it is safe
+ * even if used by a process with super-user privileges.
+ */
+#define HAS_GETHOSTNAME /**/
+/*#define HAS_UNAME / **/
+/*#define PHOSTNAME "" / * How to get the host name */
/* HAS_GETLOGIN:
* This symbol, if defined, indicates that the getlogin routine is
* inet_aton() function is available to parse IP address "dotted-quad"
* strings.
*/
-/*#define HAS_INET_ATON / **/
+#define HAS_INET_ATON /**/
/* HAS_KILLPG:
* This symbol, if defined, indicates that the killpg routine is available
* for a POSIX interface.
*/
#define HAS_SETPGRP /**/
-/*#define USE_BSD_SETPGRP / **/
+#define USE_BSD_SETPGRP /**/
/* HAS_SETPGRP2:
* This symbol, if defined, indicates that the setpgrp2() (as in DG/UX)
* This symbol, if defined, indicates that the setrgid routine is available
* to change the real gid of the current program.
*/
-/*#define HAS_SETRGID / **/
+#define HAS_SETRGID /**/
/* HAS_SETRUID:
* This symbol, if defined, indicates that the setruid routine is available
* to change the real uid of the current program.
*/
-/*#define HAS_SETRUID / **/
+#define HAS_SETRUID /**/
/* HAS_SETSID:
* This symbol, if defined, indicates that the setsid routine is
* This symbol, if defined, indicates that <rpcsvc/dbm.h> exists and
* should be included.
*/
-/*#define I_DBM / **/
-#define I_RPCSVC_DBM /**/
+#define I_DBM /**/
+/*#define I_RPCSVC_DBM / **/
/* I_DIRENT:
* This symbol, if defined, indicates to the C program that it should
* portably declare your directory entries.
*/
#define I_DIRENT /**/
-/*#define DIRNAMLEN / **/
+#define DIRNAMLEN /**/
#define Direntry_t struct dirent
/* I_DLFCN:
/* I_FCNTL:
* This manifest constant tells the C program to include <fcntl.h>.
*/
-#define I_FCNTL /**/
+/*#define I_FCNTL / **/
/* I_FLOAT:
* This symbol, if defined, indicates to the C program that it should
* This symbol, if defined, indicates to the C program that it should
* include <sys/dir.h>.
*/
-/*#define I_SYS_DIR / **/
+#define I_SYS_DIR /**/
/* I_SYS_FILE:
* This symbol, if defined, indicates to the C program that it should
* include <sys/file.h> to get definition of R_OK and friends.
*/
-/*#define I_SYS_FILE / **/
+#define I_SYS_FILE /**/
/* I_SYS_IOCTL:
* This symbol, if defined, indicates that <sys/ioctl.h> exists and should
/* I_SYS_ACCESS:
* This symbol, if defined, indicates to the C program that it should
- * include <sysaccess.h>.
+ * include <sys/access.h>.
*/
-/*#define I_SYS_ACCESS / **/
+#define I_SYS_ACCESS /**/
/* I_SYS_SECURITY:
* This symbol, if defined, indicates to the C program that it should
* include <sys/security.h>.
*/
-/*#define I_SYS_SECURITY / **/
+#define I_SYS_SECURITY /**/
/* MEM_ALIGNBYTES:
* This symbol contains the number of bytes required to align a
* This might matter for NeXT 3.0.
*/
#ifndef NeXT
-#define BYTEORDER 0x4321 /* large digits for MSB */
+#define BYTEORDER 0x12345678 /* large digits for MSB */
#else /* NeXT */
#ifdef __LITTLE_ENDIAN__
#define BYTEORDER 0x1234
* This symbol is defined if the C compiler can cast negative
* or large floating point numbers to 32-bit ints.
*/
-#define CASTI32 /**/
+/*#define CASTI32 / **/
/* CASTNEGFLOAT:
* This symbol is defined if the C compiler can cast negative
*/
/*#define VOID_CLOSEDIR / **/
+/* HAS_FD_SET:
+ * This symbol, when defined, indicates presence of the fd_set typedef
+ * in <sys/types.h>
+ */
+#define HAS_FD_SET /**/
+
/* Gconvert:
* This preprocessor macro is defined to convert a floating point
* number to a string without a trailing decimal point. This
* d_Gconvert='sprintf((b),"%.*g",(n),(x))'
* The last two assume trailing zeros should not be kept.
*/
-#define Gconvert(x,n,t,b) gconvert((x),(n),(t),(b))
+#define Gconvert(x,n,t,b) gcvt((x),(n),(b))
/* HAS_GNULIBC:
* This symbol, if defined, indicates to the C program that
*/
#define HAS_SIGACTION /**/
+/* HAS_SIGSETJMP:
+ * This variable indicates to the C program that the sigsetjmp()
+ * routine is available to save the calling process's registers
+ * and stack environment for later use by siglongjmp(), and
+ * to optionally save the process's signal mask. See
+ * Sigjmp_buf, Sigsetjmp, and Siglongjmp.
+ */
/* Sigjmp_buf:
* This is the buffer type to be used with Sigsetjmp and Siglongjmp.
*/
* preprocessor can make decisions based on it.
*/
#define INTSIZE 4 /**/
-#define LONGSIZE 4 /**/
+#define LONGSIZE 8 /**/
#define SHORTSIZE 2 /**/
/* VAL_O_NONBLOCK:
* the compiler supports (void *); otherwise it will be
* sizeof(char *).
*/
-#define PTRSIZE 4 /**/
+#define PTRSIZE 8 /**/
+/* Drand01:
+ * This macro is to be used to generate uniformly distributed
+ * random numbers over the range [0., 1.[. You may have to supply
+ * an 'extern double drand48();' in your program since SunOS 4.1.3
+ * doesn't provide you with anything relevant in it's headers.
+ * See HAS_DRAND48_PROTO.
+ */
+/* Rand_seed_t:
+ * This symbol defines the type of the argument of the
+ * random seed function.
+ */
+/* seedDrand01:
+ * This symbol defines the macro to be used in seeding the
+ * random number generator (see Drand01).
+ */
/* RANDBITS:
- * This symbol contains the number of bits of random number the rand()
- * function produces. Usual values are 15, 16, and 31.
+ * This symbol indicates how many bits are produced by the
+ * function used to generate normalized random numbers.
+ * Values include 15, 16, 31, and 48.
*/
-#define RANDBITS 15 /**/
+#define Drand01() drand48() /**/
+#define Rand_seed_t long /**/
+#define seedDrand01(x) srand48((Rand_seed_t)x) /**/
+#define RANDBITS 48 /**/
/* SSize_t:
* This symbol holds the type used by functions that return
* by Configure. You shouldn't rely on it too much; the specific
* feature tests from Configure are generally more reliable.
*/
-#define OSNAME "solaris" /**/
+#define OSNAME "dec_osf" /**/
/* CAT2:
* This macro catenates 2 tokens together.
#include "Bletch: How does this C preprocessor catenate tokens?"
#endif
+/* CPPSTDIN:
+ * This symbol contains the first part of the string which will invoke
+ * the C preprocessor on the standard input and produce to standard
+ * output. Typical value of "cc -E" or "/lib/cpp", but it can also
+ * call a wrapper. See CPPRUN.
+ */
+/* CPPMINUS:
+ * This symbol contains the second part of the string which will invoke
+ * the C preprocessor on the standard input and produce to standard
+ * output. This symbol will have the value "-" if CPPSTDIN needs a minus
+ * to specify standard input, otherwise the value is "".
+ */
+/* CPPRUN:
+ * This symbol contains the string which will invoke a C preprocessor on
+ * the standard input and produce to standard output. It needs to end
+ * with CPPLAST, after all other preprocessor flags have been specified.
+ * The main difference with CPPSTDIN is that this program will never be a
+ * pointer to a shell wrapper, i.e. it will be empty if no preprocessor is
+ * available directly to the user. Note that it may well be different from
+ * the preprocessor used to compile the C program.
+ */
+#define CPPSTDIN "cppstdin"
+#define CPPMINUS ""
+#define CPPRUN "/usr/bin/cpp"
+
/* HAS_ACCESS:
* This manifest constant lets the C program know that the access()
* system call is available to check for accessibility using real UID/GID.
*/
#define HAS_ACCESS /**/
+/* HAS_CSH:
+ * This symbol, if defined, indicates that the C-shell exists.
+ */
/* CSH:
* This symbol, if defined, contains the full pathname of csh.
*/
*/
#define HAS_LONG_DOUBLE /**/
#ifdef HAS_LONG_DOUBLE
-#define LONG_DOUBLESIZE 16 /**/
+#define LONG_DOUBLESIZE 8 /**/
#endif
/* HAS_LONG_LONG:
* This symbol is defined if this system has a stat structure declaring
* st_blksize and st_blocks.
*/
-#define USE_STAT_BLOCKS /* backward compatibility */
+#define USE_STAT_BLOCKS /**/
/* HAS_STRERROR:
* This symbol, if defined, indicates that the strerror routine is
*/
/*#define HAS_UNION_SEMUN / **/
#define USE_SEMCTL_SEMUN /**/
-/*#define USE_SEMCTL_SEMID_DS / **/
+#define USE_SEMCTL_SEMID_DS /**/
/* Signal_t:
* This symbol's value is either "void" or "int", corresponding to the
* contains pw_passwd.
*/
#define I_PWD /**/
-/*#define PWQUOTA / **/
-#define PWAGE /**/
+#define PWQUOTA /**/
+/*#define PWAGE / **/
/*#define PWCHANGE / **/
/*#define PWCLASS / **/
/*#define PWEXPIRE / **/
/* MYMALLOC:
* This symbol, if defined, indicates that we're using our own malloc.
*/
-#define MYMALLOC /**/
+/*#define MYMALLOC / **/
/* SIG_NAME:
* This symbol contains a list of signal names in order of
* The last element is 0, corresponding to the 0 at the end of
* the sig_name list.
*/
-#define SIG_NAME "ZERO", "HUP", "INT", "QUIT", "ILL", "TRAP", "ABRT", "EMT", "FPE", "KILL", "BUS", "SEGV", "SYS", "PIPE", "ALRM", "TERM", "USR1", "USR2", "CHLD", "PWR", "WINCH", "URG", "IO", "STOP", "TSTP", "CONT", "TTIN", "TTOU", "VTALRM", "PROF", "XCPU", "XFSZ", "WAITING", "LWP", "FREEZE", "THAW", "CANCEL", "RTMIN", "NUM38", "NUM39", "NUM40", "NUM41", "NUM42", "NUM43", "RTMAX", "IOT", "CLD", "POLL", 0 /**/
-#define SIG_NUM 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 6, 18, 22, 0 /**/
+#define SIG_NAME "ZERO", "HUP", "INT", "QUIT", "ILL", "TRAP", "ABRT", "EMT", "FPE", "KILL", "BUS", "SEGV", "SYS", "PIPE", "ALRM", "TERM", "IOINT", "STOP", "TSTP", "CONT", "CHLD", "TTIN", "TTOU", "AIO", "XCPU", "XFSZ", "VTALRM", "PROF", "WINCH", "INFO", "USR1", "USR2", "RESV", "RTMIN", "NUM34", "NUM35", "NUM36", "NUM37", "NUM38", "NUM39", "NUM40", "NUM41", "NUM42", "NUM43", "NUM44", "NUM45", "NUM46", "NUM47", "MAX", "IOT", "LOST", "URG", "CLD", "IO", "POLL", "PTY", "PWR", "RTMAX", 0 /**/
+#define SIG_NUM 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 6, 6, 16, 20, 23, 23, 23, 29, 48, 0 /**/
/* VOIDFLAGS:
* This symbol indicates how much support of the void type is given by this
* This symbol contains the ~name expanded version of ARCHLIB, to be used
* in programs that are not prepared to deal with ~ expansion at run-time.
*/
-#define ARCHLIB "/l1/packages/gsperl/lib/5.00552/sun4-solaris-thread" /**/
-#define ARCHLIB_EXP "/l1/packages/gsperl/lib/5.00552/sun4-solaris-thread" /**/
+#define ARCHLIB "/opt/perl/lib/5.00553/alpha-dec_osf-thread" /**/
+#define ARCHLIB_EXP "/opt/perl/lib/5.00553/alpha-dec_osf-thread" /**/
/* DLSYM_NEEDS_UNDERSCORE:
* This symbol, if defined, indicates that we need to prepend an
* available to seekdir files larger than 2 gigabytes.
*/
/* HAS_STAT64:
- * This symbol, if defined, indicates that the fstat64 routine is
+ * This symbol, if defined, indicates that the stat64 routine is
* available to stat files larger than 2 gigabytes.
*/
/* HAS_TELLDIR64:
* This symbol contains the ~name expanded version of PRIVLIB, to be used
* in programs that are not prepared to deal with ~ expansion at run-time.
*/
-#define PRIVLIB "/l1/packages/gsperl/lib/5.00552" /**/
-#define PRIVLIB_EXP "/l1/packages/gsperl/lib/5.00552" /**/
+#define PRIVLIB "/opt/perl/lib/5.00553" /**/
+#define PRIVLIB_EXP "/opt/perl/lib/5.00553" /**/
/* SELECT_MIN_BITS:
* This symbol holds the minimum number of bits operated by select.
* This symbol contains the ~name expanded version of SITEARCH, to be used
* in programs that are not prepared to deal with ~ expansion at run-time.
*/
-#define SITEARCH "/l1/packages/gsperl/lib/site_perl/5.00552/sun4-solaris-thread" /**/
-#define SITEARCH_EXP "/l1/packages/gsperl/lib/site_perl/5.00552/sun4-solaris-thread" /**/
+#define SITEARCH "/opt/perl/lib/site_perl/5.00553/alpha-dec_osf-thread" /**/
+#define SITEARCH_EXP "/opt/perl/lib/site_perl/5.00553/alpha-dec_osf-thread" /**/
/* SITELIB:
* This symbol contains the name of the private library for this package.
* This symbol contains the ~name expanded version of SITELIB, to be used
* in programs that are not prepared to deal with ~ expansion at run-time.
*/
-#define SITELIB "/l1/packages/gsperl/lib/site_perl/5.00552" /**/
-#define SITELIB_EXP "/l1/packages/gsperl/lib/site_perl/5.00552" /**/
+#define SITELIB "/opt/perl/lib/site_perl/5.00553" /**/
+#define SITELIB_EXP "/opt/perl/lib/site_perl/5.00553" /**/
/* STARTPERL:
* This variable contains the string to put in front of a perl
* script to make sure (one hopes) that it runs with perl and not
* some shell.
*/
-#define STARTPERL "#!/l1/packages/gsperl/bin/perl" /**/
+#define STARTPERL "#!/opt/perl/bin/perl" /**/
/* HAS_FGETPOS64:
* This symbol, if defined, indicates that the fgetpos64 routine is
/*#define HAS_TMPFILE64 / **/
/* USE_64_BITS:
- * This symbol, if defined, indicates that 64-bit APIs should
- * be used when available. If not defined, the native default APIs
+ * This symbol, if defined, indicates that 64-bit interfaces should
+ * be used when available. If not defined, the native default interfaces
* will be used (be they 32 or 64 bits).
*/
-/*#define USE_64_BITS / **/
+#define USE_64_BITS /**/
/* USE_PERLIO:
* This symbol, if defined, indicates that the PerlIO abstraction should
*/
/*#define USE_PERLIO / **/
+/* HAS_DRAND48_PROTO:
+ * This symbol, if defined, indicates that the system provides
+ * a prototype for the drand48() function. Otherwise, it is up
+ * to the program to supply one. A good guess is
+ * extern double drand48 _((void));
+ */
+#define HAS_DRAND48_PROTO /**/
+
/* HAS_GETHOST_PROTOS:
* This symbol, if defined, indicates that <netdb.h> includes
* prototypes for gethostent(), gethostbyname(), and
#define Netdb_host_t const char * /**/
#define Netdb_hlen_t int /**/
#define Netdb_name_t const char * /**/
-#define Netdb_net_t long /**/
+#define Netdb_net_t int /**/
/* Select_fd_set_t:
* This symbol holds the type used for the 2nd, 3rd, and 4th
* where library files may be held under a private library, for
* instance.
*/
-#define ARCHNAME "sun4-solaris-thread" /**/
+#define ARCHNAME "alpha-dec_osf-thread" /**/
+
+/* PTHREAD_CREATE_JOINABLE:
+ * This symbol, if defined, indicates how to create pthread
+ * in joinable (aka undetached) state. Not defined here if
+ * pthread.h already has defined PTHREAD_CREATE_JOINABLE.
+ * If defined, possible values are PTHREAD_CREATE_UNDETACHED
+ * and __UNDETACHED.
+ */
+/*#define PTHREAD_CREATE_JOINABLE 0 / **/
/* HAS_PTHREAD_YIELD:
* This symbol, if defined, indicates that the pthread_yield
* routine is available to yield the execution of the current
- * thread.
+ * thread. sched_yield is preferable to pthread_yield.
+ */
+/* SCHED_YIELD:
+ * This symbol defines the way to yield the execution of
+ * the current thread. Known ways are sched_yield,
+ * pthread_yield, and pthread_yield with NULL.
*/
/* HAS_SCHED_YIELD:
* This symbol, if defined, indicates that the sched_yield
* routine is available to yield the execution of the current
- * thread.
+ * thread. sched_yield is preferable to pthread_yield.
*/
/*#define HAS_PTHREAD_YIELD / **/
+#define SCHED_YIELD sched_yield() /**/
#define HAS_SCHED_YIELD /**/
-/* PTHREADS_CREATED_JOINABLE:
- * This symbol, if defined, indicates that pthreads are created
- * in the joinable (aka undetached) state.
+/* I_MACH_CTHREADS:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <mach/cthreads.h>.
+ */
+/*#define I_MACH_CTHREADS / **/
+
+/* MULTIPLICITY:
+ * This symbol, if defined, indicates that Perl should
+ * be built to use multiplicity.
*/
-#define PTHREADS_CREATED_JOINABLE /**/
+/*#define MULTIPLICITY / **/
/* USE_THREADS:
* This symbol, if defined, indicates that Perl should
* It can be int, long, off_t, etc... It may be necessary to include
* <sys/types.h> to get any typedef'ed information.
*/
+/* LSEEKSIZE:
+ * This symbol holds the number of bytes used by the Off_t.
+ */
#define Off_t off_t /* <offset> type */
+#define LSEEKSIZE 8 /* <offset> size */
/* Mode_t:
* This symbol holds the type used to declare file modes
*/
#$d_getgrps HAS_GETGROUPS /**/
+/* HAS_GETHOSTNAME:
+ * This symbol, if defined, indicates that the C program may use the
+ * gethostname() routine to derive the host name. See also HAS_UNAME
+ * and PHOSTNAME.
+ */
/* HAS_UNAME:
* This symbol, if defined, indicates that the C program may use the
* uname() routine to derive the host name. See also HAS_GETHOSTNAME
* and PHOSTNAME.
*/
+/* PHOSTNAME:
+ * This symbol, if defined, indicates that the C program may use the
+ * contents of PHOSTNAME as a command to feed to the popen() routine
+ * to derive the host name. See also HAS_GETHOSTNAME and HAS_UNAME.
+ * Note that the command uses a fully qualified path, so that it is safe
+ * even if used by a process with super-user privileges.
+ */
+#$d_gethname HAS_GETHOSTNAME /**/
#$d_uname HAS_UNAME /**/
+#$d_phostname PHOSTNAME "$aphostname" /* How to get the host name */
/* HAS_GETLOGIN:
* This symbol, if defined, indicates that the getlogin routine is
*/
#$d_void_closedir VOID_CLOSEDIR /**/
+/* HAS_FD_SET:
+ * This symbol, when defined, indicates presence of the fd_set typedef
+ * in <sys/types.h>
+ */
+#$d_fd_set HAS_FD_SET /**/
+
/* Gconvert:
* This preprocessor macro is defined to convert a floating point
* number to a string without a trailing decimal point. This
*/
#$d_sigaction HAS_SIGACTION /**/
+/* HAS_SIGSETJMP:
+ * This variable indicates to the C program that the sigsetjmp()
+ * routine is available to save the calling process's registers
+ * and stack environment for later use by siglongjmp(), and
+ * to optionally save the process's signal mask. See
+ * Sigjmp_buf, Sigsetjmp, and Siglongjmp.
+ */
/* Sigjmp_buf:
* This is the buffer type to be used with Sigsetjmp and Siglongjmp.
*/
* output. This symbol will have the value "-" if CPPSTDIN needs a minus
* to specify standard input, otherwise the value is "".
*/
+/* CPPRUN:
+ * This symbol contains the string which will invoke a C preprocessor on
+ * the standard input and produce to standard output. It needs to end
+ * with CPPLAST, after all other preprocessor flags have been specified.
+ * The main difference with CPPSTDIN is that this program will never be a
+ * pointer to a shell wrapper, i.e. it will be empty if no preprocessor is
+ * available directly to the user. Note that it may well be different from
+ * the preprocessor used to compile the C program.
+ */
#define CPPSTDIN "$cppstdin"
#define CPPMINUS "$cppminus"
+#define CPPRUN "$cpprun"
/* HAS_ACCESS:
* This manifest constant lets the C program know that the access()
*/
#$d_access HAS_ACCESS /**/
+/* HAS_CSH:
+ * This symbol, if defined, indicates that the C-shell exists.
+ */
/* CSH:
* This symbol, if defined, contains the full pathname of csh.
*/
/*#define HAS_PTHREAD_YIELD /**/
/*#define HAS_SCHED_YIELD /**/
-/* PTHREADS_CREATED_JOINABLE:
- * This symbol, if defined, indicates that pthreads are created
- * in the joinable (aka undetached) state.
- */
-/*#define PTHREADS_CREATED_JOINABLE /**/
-
/* USE_THREADS:
* This symbol, if defined, indicates that Perl should
* be built to use threads.
projects / p5sagit/p5-mst-13.2.git / commitdiff