* $Id: Config_h.U,v 3.0.1.4 1995/09/25 09:10:49 ram Exp $
*/
-/* Configuration time: Mon Mar 18 23:11:24 EST 1996
- * Configured by: bailey
- * Target system: sunos agave.humgen.upenn.edu 5.4 generic_101945-13 sun4m sparc
+/* Configuration time: Fri Aug 23 15:12:57 EDT 1996
+ * Configured by: doughera
+ * Target system: sunos fractal 5.5 generic i86pc i386 i86pc
*/
#ifndef _config_h_
* This symbol holds the path of the bin directory where the package will
* be installed. Program must be prepared to deal with ~name substitution.
*/
-#define BIN "/usr/local/bin" /**/
+#define BIN "/opt/perl/bin" /**/
/* CAT2:
* This macro catenates 2 tokens together.
* This symbol is defined if the bcmp() routine is available to
* compare blocks of memory.
*/
-/*#define HAS_BCMP /**/
+#define HAS_BCMP /**/
/* HAS_BCOPY:
* This symbol is defined if the bcopy() routine is available to
* copy blocks of memory.
*/
-/*#define HAS_BCOPY /**/
+#define HAS_BCOPY /**/
/* HAS_BZERO:
* This symbol is defined if the bzero() routine is available to
* set a memory block to 0.
*/
-/*#define HAS_BZERO /**/
+#define HAS_BZERO /**/
/* CASTI32:
* This symbol is defined if the C compiler can cast negative
* This symbol, if defined, indicates that the getpriority routine is
* available to get a process's priority.
*/
-/*#define HAS_GETPRIORITY /**/
+#define HAS_GETPRIORITY /**/
/* HAS_HTONL:
* This symbol, if defined, indicates that the htonl() routine (and
* to kill process groups. If unavailable, you probably should use kill
* with a negative process number.
*/
-/*#define HAS_KILLPG /**/
+#define HAS_KILLPG /**/
/* HAS_LINK:
* This symbol, if defined, indicates that the link routine is
* probably use memmove() or memcpy(). If neither is defined, roll your
* own version.
*/
-/*#define HAS_SAFE_BCOPY /**/
+#define HAS_SAFE_BCOPY /**/
/* HAS_SAFE_MEMCPY:
* This symbol, if defined, indicates that the memcpy routine is available
* available to change stderr or stdout from block-buffered or unbuffered
* to a line-buffered mode.
*/
-/*#define HAS_SETLINEBUF /**/
+#define HAS_SETLINEBUF /**/
/* HAS_SETLOCALE:
* This symbol, if defined, indicates that the setlocale routine is
* This symbol, if defined, indicates that the setpriority routine is
* available to set a process's priority.
*/
-/*#define HAS_SETPRIORITY /**/
+#define HAS_SETPRIORITY /**/
/* HAS_SETREGID:
* This symbol, if defined, indicates that the setregid routine is
* available to change the real, effective and saved gid of the current
* process.
*/
-/*#define HAS_SETREGID /**/
+#define HAS_SETREGID /**/
/*#define HAS_SETRESGID /**/
/* HAS_SETREUID:
* available to change the real, effective and saved uid of the current
* process.
*/
-/*#define HAS_SETREUID /**/
+#define HAS_SETREUID /**/
/*#define HAS_SETRESUID /**/
/* HAS_SETRGID:
* and FILE_cnt(fp) macros will also be defined and should be used
* to access these fields.
*/
-/* USE_STDIO_BASE:
- * This symbol is defined if the _base field (or similar) of the
- * stdio FILE structure can be used to access the stdio buffer for
- * a file handle. If this is defined, then the FILE_base(fp) macro
- * will also be defined and should be used to access this field.
- * Also, the FILE_bufsiz(fp) macro will be defined and should be used
- * to determine the number of bytes in the buffer. USE_STDIO_BASE
- * will never be defined unless USE_STDIO_PTR is.
- */
-#define USE_STDIO_PTR /**/
-#define USE_STDIO_BASE /**/
-
/* FILE_ptr:
* This macro is used to access the _ptr field (or equivalent) of the
* FILE structure pointed to by its argument. This macro will always be
* This symbol is defined if the FILE_cnt macro can be used as an
* lvalue.
*/
+/* FILE_filbuf:
+ * This macro is used to access the internal stdio _filbuf function
+ * (or equivalent), if STDIO_CNT_LVALUE and STDIO_PTR_LVALUE
+ * are defined. It is typically either _filbuf or __filbuf.
+ * This macro will only be defined if both STDIO_CNT_LVALUE and
+ * STDIO_PTR_LVALUE are defined.
+ */
+#define USE_STDIO_PTR /**/
#ifdef USE_STDIO_PTR
#define FILE_ptr(fp) ((fp)->_ptr)
#define STDIO_PTR_LVALUE /**/
#define FILE_cnt(fp) ((fp)->_cnt)
#define STDIO_CNT_LVALUE /**/
+#if defined(STDIO_PTR_LVALUE) && defined(STDIO_CNT_LVALUE)
+#define FILE_filbuf(fp) _filbuf(fp) /**/
+#endif
#endif
+/* USE_STDIO_BASE:
+ * This symbol is defined if the _base field (or similar) of the
+ * stdio FILE structure can be used to access the stdio buffer for
+ * a file handle. If this is defined, then the FILE_base(fp) macro
+ * will also be defined and should be used to access this field.
+ * Also, the FILE_bufsiz(fp) macro will be defined and should be used
+ * to determine the number of bytes in the buffer. USE_STDIO_BASE
+ * will never be defined unless USE_STDIO_PTR is.
+ */
/* FILE_base:
* This macro is used to access the _base field (or equivalent) of the
* FILE structure pointed to by its argument. This macro will always be
* structure pointed to its argument. This macro will always be defined
* if USE_STDIO_BASE is defined.
*/
+#define USE_STDIO_BASE /**/
#ifdef USE_STDIO_BASE
#define FILE_base(fp) ((fp)->_base)
#define FILE_bufsiz(fp) ((fp)->_cnt + (fp)->_ptr - (fp)->_base)
/* HAS_WAIT4:
* This symbol, if defined, indicates that wait4() exists.
*/
-/*#define HAS_WAIT4 /**/
+#define HAS_WAIT4 /**/
/* HAS_WAITPID:
* This symbol, if defined, indicates that the waitpid routine is
*/
#define I_SYS_PARAM /**/
+/* I_SYS_RESOURCE:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <sys/resource.h>.
+ */
+#define I_SYS_RESOURCE /**/
+
/* I_SYS_SELECT:
* This symbol, if defined, indicates to the C program that it should
* include <sys/select.h> in order to get definition of struct timeval.
*/
#define I_SYS_UN /**/
+/* I_SYS_WAIT:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <sys/wait.h>.
+ */
+#define I_SYS_WAIT /**/
+
/* I_TERMIO:
* This symbol, if defined, indicates that the program should include
* <termio.h> rather than <sgtty.h>. There are also differences in
*/
#define I_UTIME /**/
+/* I_STDARG:
+ * This symbol, if defined, indicates that <stdarg.h> exists and should
+ * be included.
+ */
+/* I_VARARGS:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <varargs.h>.
+ */
+#define I_STDARG /**/
+/*#define I_VARARGS /**/
+
/* I_VFORK:
* This symbol, if defined, indicates to the C program that it should
* include vfork.h.
*/
/*#define I_VFORK /**/
+/* INTSIZE:
+ * This symbol contains the size of an int, so that the C preprocessor
+ * can make decisions based on it.
+ */
+#define INTSIZE 4 /**/
+
/* Off_t:
* This symbol holds the type used to declare offsets in the kernel.
* It can be int, long, off_t, etc... It may be necessary to include
* is often a directory that is mounted across diverse architectures.
* Programs must be prepared to deal with ~name expansion.
*/
-#define SCRIPTDIR "/usr/local/script" /**/
+#define SCRIPTDIR "/opt/perl/script" /**/
/* Select_fd_set_t:
* This symbol holds the type used for the 2nd, 3rd, and 4th
*/
#define Size_t size_t /* length paramater for string functions */
-/* SSize_t:
- * This symbol holds the type used by functions that return
- * a count of bytes or an error condition. It must be a signed type.
- * It is usually ssize_t, but may be long or int, etc.
- * It may be necessary to include <sys/types.h> or <unistd.h>
- * to get any typedef'ed information.
- * We will pick a type such that sizeof(SSize_t) == sizeof(Size_t).
- */
-#define SSize_t ssize_t /* signed count of bytes */
-
/* STDCHAR:
* This symbol is defined to be the type of char used in stdio.h.
* It has the values "unsigned char" or "char".
*/
#define Uid_t uid_t /* UID type */
-/* VMS:
- * This symbol, if defined, indicates that the program is running under
- * VMS. It is currently only set in conjunction with the EUNICE symbol.
- */
-/*#define VMS /**/
-
/* LOC_SED:
* This symbol holds the complete pathname to the sed program.
*/
#define LOC_SED "/bin/sed" /**/
-/* ARCHLIB_EXP:
- * This symbol contains the ~name expanded version of ARCHLIB, to be used
- * in programs that are not prepared to deal with ~ expansion at run-time.
- */
-#define ARCHLIB_EXP "/usr/local/lib/perl5/i86pc-solaris/5.002" /**/
-
/* OSNAME:
* This symbol contains the name of the operating system, as determined
- * by Configure.
+ * by Configure. You shouldn't rely on it too much; the specific
+ * feature tests from Configure are generally more reliable.
*/
#define OSNAME "solaris" /**/
+/* ARCHLIB:
+ * This variable, if defined, holds the name of the directory in
+ * which the user wants to put architecture-dependent public
+ * library files for perl5. It is most often a local directory
+ * such as /usr/local/lib. Programs using this variable must be
+ * prepared to deal with filename expansion. If ARCHLIB is the
+ * same as PRIVLIB, it is not defined, since presumably the
+ * program already searches PRIVLIB.
+ */
+/* ARCHLIB_EXP:
+ * This symbol contains the ~name expanded version of ARCHLIB, to be used
+ * in programs that are not prepared to deal with ~ expansion at run-time.
+ */
+#define ARCHLIB "/opt/perl/lib/i86pc-solaris/5.00303" /**/
+#define ARCHLIB_EXP "/opt/perl/lib/i86pc-solaris/5.00303" /**/
+
/* BYTEORDER:
- * This symbol hold the hexadecimal constant defined in byteorder,
+ * This symbol holds the hexadecimal constant defined in byteorder,
* i.e. 0x1234 or 0x4321, etc...
- */
+ * On NeXT 4 (and greater), you can build "Fat" Multiple Architecture
+ * Binaries (MAB) on either big endian or little endian machines.
+ * The endian-ness is available at compile-time. This only matters
+ * for perl, where the config.h can be generated and installed on
+ * one system, and used by a different architecture to build an
+ * extension. Older versions of NeXT that might not have
+ * defined either *_ENDIAN__ were all on Motorola 680x0 series,
+ * so the default case (for NeXT) is big endian to catch them.
+ * This might matter for NeXT 3.0.
+ */
+#ifndef NeXT
#define BYTEORDER 0x1234 /* large digits for MSB */
+#else /* NeXT */
+#ifdef __LITTLE_ENDIAN__
+#define BYTEORDER 0x1234
+#else /* __BIG_ENDIAN__ */
+#define BYTEORDER 0x4321
+#endif /* ENDIAN CHECK */
+#endif /* NeXT */
/* CSH:
* This symbol, if defined, indicates that the C-shell exists.
*/
#define Gconvert(x,n,t,b) gconvert((x),(n),(t),(b))
+/* USE_SFIO:
+ * This symbol, if defined, indicates that sfio should
+ * be used.
+ */
+/*#define USE_SFIO /**/
+
/* Sigjmp_buf:
- * This is the buffer type to be used with Sigsetjmp and Siglongjmp.
+ * This is the buffer type to be used with Sigsetjmp and Siglongjmp.
*/
/* Sigsetjmp:
- * This macro is used in the same way as sigsetjmp(), but will invoke
- * traditional setjmp() if sigsetjmp isn't available.
+ * This macro is used in the same way as sigsetjmp(), but will invoke
+ * traditional setjmp() if sigsetjmp isn't available.
+ * See HAS_SIGSETJMP.
*/
/* Siglongjmp:
- * This macro is used in the same way as siglongjmp(), but will invoke
- * traditional longjmp() if siglongjmp isn't available.
+ * This macro is used in the same way as siglongjmp(), but will invoke
+ * traditional longjmp() if siglongjmp isn't available.
+ * See HAS_SIGSETJMP.
*/
#define HAS_SIGSETJMP /**/
#ifdef HAS_SIGSETJMP
#define Sigjmp_buf sigjmp_buf
-#define Sigsetjmp(buf,save_mask) sigsetjmp(buf,save_mask)
-#define Siglongjmp(buf,retval) siglongjmp(buf,retval)
+#define Sigsetjmp(buf,save_mask) sigsetjmp((buf),(save_mask))
+#define Siglongjmp(buf,retval) siglongjmp((buf),(retval))
#else
#define Sigjmp_buf jmp_buf
-#define Sigsetjmp(buf,save_mask) setjmp(buf)
-#define Siglongjmp(buf,retval) longjmp(buf,retval)
+#define Sigsetjmp(buf,save_mask) setjmp((buf))
+#define Siglongjmp(buf,retval) longjmp((buf),(retval))
#endif
/* USE_DYNAMIC_LOADING:
*/
#define I_LOCALE /**/
+/* I_SFIO:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <sfio.h>.
+ */
+/*#define I_SFIO /**/
+
/* I_SYS_STAT:
* This symbol, if defined, indicates to the C program that it should
* include <sys/stat.h>.
*/
#define I_SYS_STAT /**/
-/* I_STDARG:
- * This symbol, if defined, indicates that <stdarg.h> exists and should
- * be included.
- */
-/* I_VARARGS:
+/* I_VALUES:
* This symbol, if defined, indicates to the C program that it should
- * include <varargs.h>.
+ * include <values.h> to get definition of symbols like MINFLOAT or
+ * MAXLONG, i.e. machine dependant limitations. Probably, you
+ * should use <limits.h> instead, if it is available.
*/
-#define I_STDARG /**/
-/*#define I_VARARGS /**/
-
-/* INTSIZE:
- * This symbol contains the size of an int, so that the C preprocessor
- * can make decisions based on it.
- */
-#define INTSIZE 4 /**/
+#define I_VALUES /**/
/* Free_t:
* This variable contains the return type of free(). It is usually
#define RD_NODATA -1
#define EOF_NONBLOCK
+/* OLDARCHLIB:
+ * This variable, if defined, holds the name of the directory in
+ * which the user has perl5.000 or perl5.001 architecture-dependent
+ * public library files for perl5. For the most part, these
+ * files will work with 5.002 (and later), but that is not
+ * guaranteed.
+ */
/* OLDARCHLIB_EXP:
* This symbol contains the ~name expanded version of OLDARCHLIB, to be
* used in programs that are not prepared to deal with ~ expansion at
* run-time.
*/
+/*#define OLDARCHLIB "" /**/
/*#define OLDARCHLIB_EXP "" /**/
+/* PRIVLIB:
+ * This symbol contains the name of the private library for this package.
+ * The library is private in the sense that it needn't be in anyone's
+ * execution path, but it should be accessible by the world. The program
+ * should be prepared to do ~ expansion.
+ */
/* PRIVLIB_EXP:
* This symbol contains the ~name expanded version of PRIVLIB, to be used
* in programs that are not prepared to deal with ~ expansion at run-time.
*/
-#define PRIVLIB_EXP "/usr/local/lib/perl5" /**/
+#define PRIVLIB "/opt/perl/lib" /**/
+#define PRIVLIB_EXP "/opt/perl/lib" /**/
+
+/* SH_PATH:
+ * This symbol contains the full pathname to the shell used on this
+ * on this system to execute Bourne shell scripts. Usually, this will be
+ * /bin/sh, though it's possible that some systems will have /bin/ksh,
+ * /bin/pdksh, /bin/ash, /bin/bash, or even something such as D:/bin/sh.
+ */
+#define SH_PATH "/bin/sh" /**/
/* SIG_NAME:
* This symbol contains a list of signal names in order of
* The last element is 0, corresponding to the 0 at the end of
* the sig_name list.
*/
-#define SIG_NAME "ZERO","HUP","INT","QUIT","ILL","TRAP","ABRT","EMT","FPE","KILL","BUS","SEGV","SYS","PIPE","ALRM","TERM","USR1","USR2","CHLD","PWR","WINCH","URG","IO","STOP","TSTP","CONT","TTIN","TTOU","VTALRM","PROF","XCPU","XFSZ","WAITING","LWP","FREEZE","THAW","RTMIN","NUM37","NUM38","NUM39","NUM40","NUM41","NUM42","RTMAX","IOT","CLD","POLL",0 /**/
-#define SIG_NUM 0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,6,18,22,0 /**/
+#define SIG_NAME "ZERO","HUP","INT","QUIT","ILL","TRAP","ABRT","EMT","FPE","KILL","BUS","SEGV","SYS","PIPE","ALRM","TERM","USR1","USR2","CHLD","PWR","WINCH","URG","IO","STOP","TSTP","CONT","TTIN","TTOU","VTALRM","PROF","XCPU","XFSZ","WAITING","LWP","FREEZE","THAW","CANCEL","RTMIN","NUM38","NUM39","NUM40","NUM41","NUM42","NUM43","RTMAX","IOT","CLD","POLL",0 /**/
+#define SIG_NUM 0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,6,18,22,0 /**/
+/* SITEARCH:
+ * This symbol contains the name of the private library for this package.
+ * The library is private in the sense that it needn't be in anyone's
+ * execution path, but it should be accessible by the world. The program
+ * should be prepared to do ~ expansion.
+ * The standard distribution will put nothing in this directory.
+ * Individual sites may place their own extensions and modules in
+ * this directory.
+ */
/* SITEARCH_EXP:
* This symbol contains the ~name expanded version of SITEARCH, to be used
* in programs that are not prepared to deal with ~ expansion at run-time.
*/
-#define SITEARCH_EXP "/usr/local/lib/perl5/site_perl/i86pc-solaris" /**/
+#define SITEARCH "/opt/perl/lib/site_perl/i86pc-solaris" /**/
+#define SITEARCH_EXP "/opt/perl/lib/site_perl/i86pc-solaris" /**/
+/* SITELIB:
+ * This symbol contains the name of the private library for this package.
+ * The library is private in the sense that it needn't be in anyone's
+ * execution path, but it should be accessible by the world. The program
+ * should be prepared to do ~ expansion.
+ * The standard distribution will put nothing in this directory.
+ * Individual sites may place their own extensions and modules in
+ * this directory.
+ */
/* SITELIB_EXP:
* This symbol contains the ~name expanded version of SITELIB, to be used
* in programs that are not prepared to deal with ~ expansion at run-time.
*/
-#define SITELIB_EXP "/usr/local/lib/perl5/site_perl" /**/
+#define SITELIB "/opt/perl/lib/site_perl" /**/
+#define SITELIB_EXP "/opt/perl/lib/site_perl" /**/
+
+/* SSize_t:
+ * This symbol holds the type used by functions that return
+ * a count of bytes or an error condition. It must be a signed type.
+ * It is usually ssize_t, but may be long or int, etc.
+ * It may be necessary to include <sys/types.h> or <unistd.h>
+ * to get any typedef'ed information.
+ * We will pick a type such that sizeof(SSize_t) == sizeof(Size_t).
+ */
+#define SSize_t ssize_t /* signed count of bytes */
/* STARTPERL:
* This variable contains the string to put in front of a perl
* script to make sure (one hopes) that it runs with perl and not
* some shell.
*/
-#define STARTPERL "#!/usr/local/bin/perl" /**/
+#define STARTPERL "#!/opt/perl/bin/perl" /**/
-/* BIN_SH:
- * This variable contains the path to the shell.
+/* USE_PERLIO:
+ * This symbol, if defined, indicates that the PerlIO abstraction should
+ * be used throughout. If not defined, stdio should be
+ * used in a fully backward compatible manner.
*/
-#define BIN_SH "/bin/sh" /**/
+/*#define USE_PERLIO /**/
/* VOIDFLAGS:
* This symbol indicates how much support of the void type is given by this
projects / p5sagit/p5-mst-13.2.git / commitdiff