+++ /dev/null
-#
-# Makefile to build perl on Windows NT 64 Bit using Microsoft NMAKE.
-#
-# Building for Itanium requires the latest SDK, a (currently unsupported)
-# native Microsoft IA64 Compiler (13.00.9367.7 for IA-64 or higher), and
-# of course an Itanium box running Windows XP.
-# Quick start:
-# 1) Edit INST_TOP and INST_DRV in this Makefile if necessary.
-# 2) nmake -f Makefile.win64
-# 3) nmake -f Makefile.win64 test
-# => Currently lib/posix.t 2 and op/64bitint.t 23, 53-55 will fail
-# 4) nmake -f Makefile.win64 install
-#
-# This Configuration eanbles 64 Bit porting warning (/Wp64). Watch out for C4700
-# warnings when porting addon modules to WIN64, most of them will result in runtime
-# crashes. Remember that most data types remain unchanged on WIN64. Especially long
-# is still 32 Bit. Native 64 Bit datatypes are for example __int64 or size_t. If
-# you really need to add WIN64 specific code use ifdef _WIN64.
-#
-# randolf.werner@sap.com
-
-##
-## Make sure you read README.win32 *before* you mess with anything here!
-##
-## If you want a configuration that is the same as ActivePerl (see
-## www.ActiveState.com) make sure you set at least BUILD_FLAVOR below!
-##
-
-##
-## Build configuration. Edit the values below to suit your needs.
-##
-
-#
-# Set these to wherever you want "nmake install" to put your newly
-# built perl. Setting it to a path with spaces is NOT recommended.
-#
-INST_DRV = c:
-INST_TOP = $(INST_DRV)\perl64
-
-#
-# uncomment one of the following lines if you are using either
-# Visual C++ 2.x, or Visual C++ 5.x (aka Visual Studio 97) _without_
-# service pack 3 applied.
-#
-# If you have 5.x SP3 or later, or 6.x, no change is required.
-#
-#CCTYPE = MSVC20
-#CCTYPE = MSVC_PRE_50SP3
-
-#
-# set the install locations of the compiler include/libraries. Running
-# VCVARS32.BAT is *required* when using Visual C. Some versions of
-# Visual C earlier than 5.x SP3 don't define MSVCDIR in the environment.
-# If such is the case you may have to set CCHOME explicitly. Spaces in
-# the path name should not be quoted.
-#
-# If you have run VCVARS32.BAT and have VC 5.x SP3 or later, the defaults
-# should just work.
-#
-#CCHOME = f:\msvc20
-CCHOME = $(MSVCDIR)
-CCINCDIR = $(CCHOME)\include
-CCLIBDIR = $(CCHOME)\lib
-
-#
-# if you have the source for des_fcrypt(), uncomment CRYPT_SRC and make sure
-# the file exists (see README.win32). File should be located in the same
-# directory as this makefile.
-#
-# If you didn't set CRYPT_SRC and if you have des_fcrypt() available in a
-# library, uncomment CRYPT_LIB, and make sure the library exists (see
-# README.win32). Specify the full pathname of the library.
-#
-# If you don't enable one of these, the crypt() builtin will fail to work.
-# (Generally not critical.)
-#
-#CRYPT_SRC = fcrypt.c
-#CRYPT_LIB = fcrypt.lib
-
-#
-# uncomment this option if you want to bulk-enable all the options that
-# ActiveState uses to build their ActivePerl distribution. If you set this,
-# there should be no need to set any of the other options that follow.
-#
-# If you don't enable this, the defaults below will get you the most
-# efficient perl configuration possible that will also be compatible
-# with the build defaults used on Unix platforms. On the other hand,
-# the ActivePerl configuration will get you fork() emulation at the
-# cost of some added bloat.
-#
-#BUILD_FLAVOR = ActivePerl
-
-#
-# uncomment next line if you want debug version of perl (big and slow).
-# If not enabled, we automatically try to use maximum optimization
-# with all compilers that are known to have a working optimizer.
-#
-#CFG = Debug
-
-#
-# Comment this out if you DON'T want your perl installation to be versioned.
-# This means that the new installation will overwrite any files from the
-# old installation at the same INST_TOP location. Leaving it enabled is
-# the safest route, as perl adds the extra version directory to all the
-# locations it installs files to. If you disable it, an alternative
-# versioned installation can be obtained by setting INST_TOP above to a
-# path that includes an arbitrary version string.
-#
-INST_VER = \5.6.1
-
-#
-# Comment this out if you DON'T want your perl installation to have
-# architecture specific components. This means that architecture-
-# specific files will be installed along with the architecture-neutral
-# files. Leaving it enabled is safer and more flexible, in case you
-# want to build multiple flavors of perl and install them together in
-# the same location. Commenting it out gives you a simpler
-# installation that is easier to understand for beginners.
-#
-INST_ARCH = \$(ARCHNAME)
-
-#
-# uncomment to enable multiple interpreters. This is need for fork()
-# emulation.
-#
-#USE_MULTI = define
-
-#
-# Beginnings of interpreter cloning/threads; still very incomplete.
-# This should be enabled to get the fork() emulation. This needs
-# USE_MULTI as well.
-#
-#USE_ITHREADS = define
-
-#
-# uncomment to enable the implicit "host" layer for all system calls
-# made by perl. This needs USE_MULTI above. This is also needed to
-# get fork().
-#
-#USE_IMP_SYS = define
-
-#
-# WARNING! This option is deprecated and will eventually go away (enable
-# USE_ITHREADS instead).
-#
-# uncomment to enable threads-capabilities. This is incompatible with
-# USE_ITHREADS, and is only here for people who may have come to rely
-# on the experimental Thread support that was in 5.005.
-#
-#USE_5005THREADS= define
-
-#
-# WARNING! This option is deprecated and will eventually go away (enable
-# USE_MULTI instead).
-#
-# uncomment next line if you want to use the PERL_OBJECT build option.
-# DO NOT ENABLE unless you have legacy code that relies on the C++
-# CPerlObj class that was available in 5.005. This cannot be enabled
-# if you ask for USE_5005THREADS or USE_MULTI above.
-#
-#USE_OBJECT = define
-
-#
-# uncomment to enable use of PerlCRT.DLL when using the Visual C compiler.
-# It has patches that fix known bugs in older versions of MSVCRT.DLL.
-# This currently requires VC 5.0 with Service Pack 3 or later.
-# Get it from CPAN at http://www.perl.com/CPAN/authors/id/D/DO/DOUGL/
-# and follow the directions in the package to install.
-#
-# Not recommended if you have VC 6.x and you're not running Windows 9x.
-#
-#USE_PERLCRT = define
-
-#
-# uncomment to enable linking with setargv.obj under the Visual C
-# compiler. Setting this option enables perl to expand wildcards in
-# arguments, but it may be harder to use alternate methods like
-# File::DosGlob that are more powerful, or use perl inside shells
-# that do the expansion for you. This option is supported only
-# with Visual C.
-#
-#USE_SETARGV = define
-
-#
-# set this if you wish to use perl's malloc
-# WARNING: Turning this on/off WILL break binary compatibility with extensions
-# you may have compiled with/without it. Be prepared to recompile all
-# extensions if you change the default. Currently, this cannot be enabled
-# if you ask for USE_IMP_SYS above.
-#
-#PERL_MALLOC = define
-
-#
-# Additional compiler flags can be specified here.
-#
-
-#
-# This should normally be disabled. Adding -DPERL_POLLUTE enables support
-# for old symbols by default, at the expense of extreme pollution. You most
-# probably just want to build modules that won't compile with
-# perl Makefile.PL POLLUTE=1
-# instead of enabling this. Please report such modules to the respective
-# authors.
-#
-#BUILDOPT = $(BUILDOPT) -DPERL_POLLUTE
-
-#
-# This should normally be disabled. Enabling it will disable the File::Glob
-# implementation of CORE::glob.
-#
-#BUILDOPT = $(BUILDOPT) -DPERL_EXTERNAL_GLOB
-
-#
-# This should normally be disabled. Enabling it causes perl to read scripts
-# in text mode (which is the 5.005 behavior) and will break ByteLoader.
-#BUILDOPT = $(BUILDOPT) -DPERL_TEXTMODE_SCRIPTS
-
-#
-# specify semicolon-separated list of extra directories that modules will
-# look for libraries (spaces in path names need not be quoted)
-#
-EXTRALIBDIRS =
-
-#
-# set this to your email address (perl will guess a value from
-# from your loginname and your hostname, which may not be right)
-#
-#EMAIL =
-
-##
-## Build configuration ends.
-##
-
-##################### CHANGE THESE ONLY IF YOU MUST #####################
-
-!IF "$(BUILD_FLAVOR)" == "ActivePerl"
-INST_VER =
-INST_ARCH =
-USE_MULTI = define
-USE_ITHREADS = define
-USE_IMP_SYS = define
-USE_5005THREADS = undef
-USE_OBJECT = undef
-USE_PERLCRT = undef
-USE_SETARGV =
-PERL_MALLOC = undef
-!ENDIF
-
-!IF "$(CRYPT_SRC)$(CRYPT_LIB)" == ""
-D_CRYPT = undef
-!ELSE
-D_CRYPT = define
-CRYPT_FLAG = -DHAVE_DES_FCRYPT
-!ENDIF
-
-!IF "$(USE_OBJECT)" == "define"
-PERL_MALLOC = undef
-USE_5005THREADS = undef
-USE_MULTI = undef
-USE_IMP_SYS = define
-!ENDIF
-
-!IF "$(PERL_MALLOC)" == ""
-PERL_MALLOC = undef
-!ENDIF
-
-!IF "$(USE_5005THREADS)" == ""
-USE_5005THREADS = undef
-!ENDIF
-
-!IF "$(USE_5005THREADS)" == "define"
-USE_ITHREADS = undef
-!ENDIF
-
-!IF "$(USE_IMP_SYS)" == "define"
-PERL_MALLOC = undef
-!ENDIF
-
-!IF "$(CCTYPE)" == ""
-CCTYPE = MSVC60
-!ENDIF
-
-!IF "$(USE_MULTI)" == ""
-USE_MULTI = undef
-!ENDIF
-
-!IF "$(USE_OBJECT)" == ""
-USE_OBJECT = undef
-!ENDIF
-
-!IF "$(USE_ITHREADS)" == ""
-USE_ITHREADS = undef
-!ENDIF
-
-!IF "$(USE_IMP_SYS)" == ""
-USE_IMP_SYS = undef
-!ENDIF
-
-!IF "$(USE_PERLCRT)" == ""
-USE_PERLCRT = undef
-!ENDIF
-
-!IF "$(USE_IMP_SYS)$(USE_MULTI)$(USE_5005THREADS)$(USE_OBJECT)" == "defineundefundefundef"
-USE_MULTI = define
-!ENDIF
-
-!IF "$(USE_ITHREADS)$(USE_MULTI)$(USE_OBJECT)" == "defineundefundef"
-USE_MULTI = define
-USE_5005THREADS = undef
-!ENDIF
-
-!IF "$(USE_MULTI)$(USE_5005THREADS)$(USE_OBJECT)" != "undefundefundef"
-BUILDOPT = $(BUILDOPT) -DPERL_IMPLICIT_CONTEXT
-!ENDIF
-
-!IF "$(USE_IMP_SYS)" != "undef"
-BUILDOPT = $(BUILDOPT) -DPERL_IMPLICIT_SYS
-!ENDIF
-
-!IF "$(PROCESSOR_ARCHITECTURE)" == ""
-PROCESSOR_ARCHITECTURE = x86
-!ENDIF
-
-!IF "$(USE_OBJECT)" == "define"
-ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-object
-!ELSE
-!IF "$(USE_5005THREADS)" == "define"
-ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-thread
-!ELSE
-!IF "$(USE_MULTI)" == "define"
-ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-multi
-!ELSE
-ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)
-!ENDIF
-!ENDIF
-!ENDIF
-
-!IF "$(USE_ITHREADS)" == "define"
-ARCHNAME = $(ARCHNAME)-thread
-!ENDIF
-
-# Visual Studio 98 specific
-!IF "$(CCTYPE)" == "MSVC60"
-# VC 6.0 can load the socket dll on demand. Makes the test suite
-# run in about 10% less time.
-DELAYLOAD = -DELAYLOAD:wsock32.dll -DELAYLOAD:shell32.dll delayimp.lib
-!ENDIF
-
-
-ARCHDIR = ..\lib\$(ARCHNAME)
-COREDIR = ..\lib\CORE
-AUTODIR = ..\lib\auto
-LIBDIR = ..\lib
-EXTDIR = ..\ext
-PODDIR = ..\pod
-EXTUTILSDIR = $(LIBDIR)\ExtUtils
-
-#
-INST_SCRIPT = $(INST_TOP)$(INST_VER)\bin
-INST_BIN = $(INST_SCRIPT)$(INST_ARCH)
-INST_LIB = $(INST_TOP)$(INST_VER)\lib
-INST_ARCHLIB = $(INST_LIB)$(INST_ARCH)
-INST_COREDIR = $(INST_ARCHLIB)\CORE
-INST_POD = $(INST_LIB)\pod
-INST_HTML = $(INST_TOP)$(INST_VER)\html
-
-#
-# Programs to compile, build .lib files and link
-#
-
-CC = cl
-LINK32 = link
-LIB32 = $(LINK32) -lib
-RSC = rc
-
-#
-# Options
-#
-
-INCLUDES = -I$(COREDIR) -I.\include -I. -I..
-#PCHFLAGS = -Fpc:\temp\vcmoduls.pch -YX
-DEFINES = -DWIN32 -D_CONSOLE -DNO_STRICT $(CRYPT_FLAG)
-LOCDEFS = -DPERLDLL -DPERL_CORE
-SUBSYS = console
-CXX_FLAG = -TP -GX
-
-!IF "$(USE_PERLCRT)" != "define"
-LIBC = msvcrt.lib
-!ELSE
-LIBC = PerlCRT.lib
-!ENDIF
-
-PERLEXE_RES =
-PERLDLL_RES =
-
-!IF "$(CFG)" == "Debug"
-! IF "$(CCTYPE)" == "MSVC20"
-OPTIMIZE = -DCONSERVATIVE -Wp64 -Od -Op -MD -Z7 -DDEBUGGING
-! ELSE
-OPTIMIZE = -DCONSERVATIVE -Wp64 -Od -Op -MD -Zi -DDEBUGGING
-! ENDIF
-LINK_DBG = -debug
-!ELSE
-# -O1 yields smaller code, which turns out to be faster than -O2
-OPTIMIZE = -DCONSERVATIVE -Wp64 -O2 -Op -MD -Zi -DNDEBUG
-# VC 6.0 seems capable of compiling perl correctly with optimizations
-# enabled. Anything earlier fails tests.
-! IF "$(CCTYPE)" == "MSVC20" || "$(CCTYPE)" == "MSVC_PRE_50SP3"
-OPTIMIZE = -DCONSERVATIVE -Wp64 -O2 -Op -MD -Zi -DNDEBUG
-! ENDIF
-LINK_DBG = -debug
-!ENDIF
-
-
-!IF "$(USE_OBJECT)" == "define"
-OPTIMIZE = $(OPTIMIZE) $(CXX_FLAG)
-BUILDOPT = $(BUILDOPT) -DPERL_OBJECT
-!ENDIF
-
-!IF "$(USE_PERLCRT)" != "define"
-BUILDOPT = $(BUILDOPT)
-!ENDIF
-
-LIBBASEFILES = $(CRYPT_LIB) \
- oldnames.lib kernel32.lib user32.lib gdi32.lib winspool.lib \
- comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib \
- netapi32.lib uuid.lib wsock32.lib mpr.lib winmm.lib \
- version.lib odbc32.lib odbccp32.lib
-
-# we add LIBC here, since we may be using PerlCRT.dll
-LIBFILES = $(LIBBASEFILES) $(LIBC)
-
-CFLAGS = -nologo -Gf -W3 $(INCLUDES) $(DEFINES) $(LOCDEFS) \
- $(PCHFLAGS) $(OPTIMIZE)
-LINK_FLAGS = -nologo -nodefaultlib $(LINK_DBG) \
- -libpath:"$(INST_COREDIR)" \
- -machine:$(PROCESSOR_ARCHITECTURE)
-OBJOUT_FLAG = -Fo
-EXEOUT_FLAG = -Fe
-
-CFLAGS_O = $(CFLAGS) $(BUILDOPT)
-
-#################### do not edit below this line #######################
-############# NO USER-SERVICEABLE PARTS BEYOND THIS POINT ##############
-
-o = .obj
-
-#
-# Rules
-#
-
-.SUFFIXES : .c $(o) .dll .lib .exe .rc .res
-
-.c$(o):
- $(CC) -c -I$(<D) $(CFLAGS_O) $(OBJOUT_FLAG)$@ $<
-
-.y.c:
- $(NOOP)
-
-$(o).dll:
- $(LINK32) -dll -subsystem:windows -implib:$(*B).lib -def:$(*B).def \
- -out:$@ $(LINK_FLAGS) $(LIBFILES) $< $(LIBPERL)
-
-.rc.res:
- $(RSC) -i.. $<
-
-#
-# various targets
-PERLIMPLIB = ..\perl56.lib
-PERLDLL = ..\perl56.dll
-
-MINIPERL = ..\miniperl.exe
-MINIDIR = .\mini
-PERLEXE = ..\perl.exe
-WPERLEXE = ..\wperl.exe
-GLOBEXE = ..\perlglob.exe
-CONFIGPM = ..\lib\Config.pm
-MINIMOD = ..\lib\ExtUtils\Miniperl.pm
-X2P = ..\x2p\a2p.exe
-
-PL2BAT = bin\pl2bat.pl
-GLOBBAT = bin\perlglob.bat
-
-UTILS = \
- ..\utils\h2ph \
- ..\utils\splain \
- ..\utils\dprofpp \
- ..\utils\perlbug \
- ..\utils\pl2pm \
- ..\utils\c2ph \
- ..\utils\h2xs \
- ..\utils\perldoc \
- ..\utils\perlcc \
- ..\pod\checkpods \
- ..\pod\pod2html \
- ..\pod\pod2latex \
- ..\pod\pod2man \
- ..\pod\pod2text \
- ..\pod\pod2usage \
- ..\pod\podchecker \
- ..\pod\podselect \
- ..\x2p\find2perl \
- ..\x2p\s2p \
- bin\exetype.pl \
- bin\runperl.pl \
- bin\pl2bat.pl \
- bin\perlglob.pl \
- bin\search.pl
-
-MAKE = nmake -nologo
-
-CFGSH_TMPL = config.win64
-CFGH_TMPL = config_H.win64
-
-XCOPY = xcopy /f /r /i /d
-RCOPY = xcopy /f /r /i /e /d
-NOOP = @echo
-NULL =
-
-#
-# filenames given to xsubpp must have forward slashes (since it puts
-# full pathnames in #line strings)
-XSUBPP = ..\$(MINIPERL) -I..\..\lib ..\$(EXTUTILSDIR)\xsubpp \
- -C++ -prototypes
-
-MICROCORE_SRC = \
- ..\av.c \
- ..\deb.c \
- ..\doio.c \
- ..\doop.c \
- ..\dump.c \
- ..\globals.c \
- ..\gv.c \
- ..\hv.c \
- ..\mg.c \
- ..\op.c \
- ..\perl.c \
- ..\perlapi.c \
- ..\perly.c \
- ..\pp.c \
- ..\pp_ctl.c \
- ..\pp_hot.c \
- ..\pp_sys.c \
- ..\regcomp.c \
- ..\regexec.c \
- ..\run.c \
- ..\scope.c \
- ..\sv.c \
- ..\taint.c \
- ..\toke.c \
- ..\universal.c \
- ..\utf8.c \
- ..\util.c \
- ..\xsutils.c
-
-EXTRACORE_SRC = $(EXTRACORE_SRC) perllib.c
-
-!IF "$(PERL_MALLOC)" == "define"
-EXTRACORE_SRC = $(EXTRACORE_SRC) ..\malloc.c
-!ENDIF
-
-!IF "$(USE_OBJECT)" != "define"
-EXTRACORE_SRC = $(EXTRACORE_SRC) ..\perlio.c
-!ENDIF
-
-WIN32_SRC = \
- .\win32.c \
- .\win32sck.c \
- .\win32thread.c
-
-!IF "$(CRYPT_SRC)" != ""
-WIN32_SRC = $(WIN32_SRC) .\$(CRYPT_SRC)
-!ENDIF
-
-DLL_SRC = $(DYNALOADER).c
-
-X2P_SRC = \
- ..\x2p\a2p.c \
- ..\x2p\hash.c \
- ..\x2p\str.c \
- ..\x2p\util.c \
- ..\x2p\walk.c
-
-CORE_NOCFG_H = \
- ..\av.h \
- ..\cop.h \
- ..\cv.h \
- ..\dosish.h \
- ..\embed.h \
- ..\form.h \
- ..\gv.h \
- ..\handy.h \
- ..\hv.h \
- ..\iperlsys.h \
- ..\mg.h \
- ..\nostdio.h \
- ..\op.h \
- ..\opcode.h \
- ..\perl.h \
- ..\perlapi.h \
- ..\perlsdio.h \
- ..\perlsfio.h \
- ..\perly.h \
- ..\pp.h \
- ..\proto.h \
- ..\regexp.h \
- ..\scope.h \
- ..\sv.h \
- ..\thread.h \
- ..\unixish.h \
- ..\utf8.h \
- ..\util.h \
- ..\warnings.h \
- ..\XSUB.h \
- ..\EXTERN.h \
- ..\perlvars.h \
- ..\intrpvar.h \
- ..\thrdvar.h \
- .\include\dirent.h \
- .\include\netdb.h \
- .\include\sys\socket.h \
- .\win32.h
-
-CORE_H = $(CORE_NOCFG_H) .\config.h
-
-MICROCORE_OBJ = $(MICROCORE_SRC:.c=.obj)
-CORE_OBJ = $(MICROCORE_OBJ) $(EXTRACORE_SRC:.c=.obj)
-WIN32_OBJ = $(WIN32_SRC:.c=.obj)
-MINICORE_OBJ = $(MICROCORE_OBJ:..\=.\mini\) \
- $(MINIDIR)\miniperlmain$(o) \
- $(MINIDIR)\perlio$(o)
-MINIWIN32_OBJ = $(WIN32_OBJ:.\=.\mini\)
-MINI_OBJ = $(MINICORE_OBJ) $(MINIWIN32_OBJ)
-DLL_OBJ = $(DLL_SRC:.c=.obj)
-X2P_OBJ = $(X2P_SRC:.c=.obj)
-
-PERLDLL_OBJ = $(CORE_OBJ)
-PERLEXE_OBJ = perlmain$(o)
-
-PERLDLL_OBJ = $(PERLDLL_OBJ) $(WIN32_OBJ) $(DLL_OBJ)
-#PERLEXE_OBJ = $(PERLEXE_OBJ) $(WIN32_OBJ) $(DLL_OBJ)
-
-!IF "$(USE_SETARGV)" != ""
-SETARGV_OBJ = setargv$(o)
-!ENDIF
-
-DYNAMIC_EXT = Socket IO Fcntl Opcode SDBM_File POSIX attrs Thread B re \
- Data/Dumper Devel/Peek ByteLoader Devel/DProf File/Glob \
- Sys/Hostname
-STATIC_EXT = DynaLoader
-NONXS_EXT = Errno
-
-DYNALOADER = $(EXTDIR)\DynaLoader\DynaLoader
-SOCKET = $(EXTDIR)\Socket\Socket
-FCNTL = $(EXTDIR)\Fcntl\Fcntl
-OPCODE = $(EXTDIR)\Opcode\Opcode
-SDBM_FILE = $(EXTDIR)\SDBM_File\SDBM_File
-IO = $(EXTDIR)\IO\IO
-POSIX = $(EXTDIR)\POSIX\POSIX
-ATTRS = $(EXTDIR)\attrs\attrs
-THREAD = $(EXTDIR)\Thread\Thread
-B = $(EXTDIR)\B\B
-RE = $(EXTDIR)\re\re
-DUMPER = $(EXTDIR)\Data\Dumper\Dumper
-ERRNO = $(EXTDIR)\Errno\Errno
-PEEK = $(EXTDIR)\Devel\Peek\Peek
-BYTELOADER = $(EXTDIR)\ByteLoader\ByteLoader
-DPROF = $(EXTDIR)\Devel\DProf\DProf
-GLOB = $(EXTDIR)\File\Glob\Glob
-HOSTNAME = $(EXTDIR)\Sys\Hostname\Hostname
-
-SOCKET_DLL = $(AUTODIR)\Socket\Socket.dll
-FCNTL_DLL = $(AUTODIR)\Fcntl\Fcntl.dll
-OPCODE_DLL = $(AUTODIR)\Opcode\Opcode.dll
-SDBM_FILE_DLL = $(AUTODIR)\SDBM_File\SDBM_File.dll
-IO_DLL = $(AUTODIR)\IO\IO.dll
-POSIX_DLL = $(AUTODIR)\POSIX\POSIX.dll
-ATTRS_DLL = $(AUTODIR)\attrs\attrs.dll
-THREAD_DLL = $(AUTODIR)\Thread\Thread.dll
-B_DLL = $(AUTODIR)\B\B.dll
-DUMPER_DLL = $(AUTODIR)\Data\Dumper\Dumper.dll
-PEEK_DLL = $(AUTODIR)\Devel\Peek\Peek.dll
-RE_DLL = $(AUTODIR)\re\re.dll
-BYTELOADER_DLL = $(AUTODIR)\ByteLoader\ByteLoader.dll
-DPROF_DLL = $(AUTODIR)\Devel\DProf\DProf.dll
-GLOB_DLL = $(AUTODIR)\File\Glob\Glob.dll
-HOSTNAME_DLL = $(AUTODIR)\Sys\Hostname\Hostname.dll
-
-ERRNO_PM = $(LIBDIR)\Errno.pm
-
-EXTENSION_C = \
- $(SOCKET).c \
- $(FCNTL).c \
- $(OPCODE).c \
- $(SDBM_FILE).c \
- $(IO).c \
- $(POSIX).c \
- $(ATTRS).c \
- $(THREAD).c \
- $(RE).c \
- $(DUMPER).c \
- $(PEEK).c \
- $(B).c \
- $(BYTELOADER).c \
- $(DPROF).c \
- $(GLOB).c \
- $(HOSTNAME).c
-
-EXTENSION_DLL = \
- $(SOCKET_DLL) \
- $(FCNTL_DLL) \
- $(OPCODE_DLL) \
- $(SDBM_FILE_DLL)\
- $(IO_DLL) \
- $(POSIX_DLL) \
- $(ATTRS_DLL) \
- $(DUMPER_DLL) \
- $(PEEK_DLL) \
- $(B_DLL) \
- $(RE_DLL) \
- $(THREAD_DLL) \
- $(BYTELOADER_DLL) \
- $(DPROF_DLL) \
- $(GLOB_DLL) \
- $(HOSTNAME_DLL)
-
-EXTENSION_PM = \
- $(ERRNO_PM)
-
-POD2HTML = $(PODDIR)\pod2html
-POD2MAN = $(PODDIR)\pod2man
-POD2LATEX = $(PODDIR)\pod2latex
-POD2TEXT = $(PODDIR)\pod2text
-
-CFG_VARS = \
- "INST_DRV=$(INST_DRV)" \
- "INST_TOP=$(INST_TOP)" \
- "INST_VER=$(INST_VER)" \
- "INST_ARCH=$(INST_ARCH)" \
- "archname=$(ARCHNAME)" \
- "cc=$(CC)" \
- "ccflags=-nologo $(OPTIMIZE:"=\") $(DEFINES) $(BUILDOPT)" \
- "cf_email=$(EMAIL)" \
- "d_crypt=$(D_CRYPT)" \
- "d_mymalloc=$(PERL_MALLOC)" \
- "libs=$(LIBFILES)" \
- "incpath=$(CCINCDIR:"=\")" \
- "libperl=$(PERLIMPLIB:..\=)" \
- "libpth=$(CCLIBDIR:"=\");$(EXTRALIBDIRS:"=\")" \
- "libc=$(LIBC)" \
- "make=nmake" \
- "static_ext=$(STATIC_EXT)" \
- "dynamic_ext=$(DYNAMIC_EXT)" \
- "nonxs_ext=$(NONXS_EXT)" \
- "use5005threads=$(USE_5005THREADS)" \
- "useithreads=$(USE_ITHREADS)" \
- "usethreads=$(USE_5005THREADS)" \
- "usemultiplicity=$(USE_MULTI)" \
- "LINK_FLAGS=$(LINK_FLAGS:"=\")" \
- "optimize=$(OPTIMIZE:"=\")"
-
-#
-# Top targets
-#
-
-all : .\config.h $(GLOBEXE) $(MINIMOD) $(CONFIGPM) $(PERLEXE) \
- $(X2P) $(EXTENSION_DLL) $(EXTENSION_PM)
-
-$(DYNALOADER)$(o) : $(DYNALOADER).c $(CORE_H) $(EXTDIR)\DynaLoader\dlutils.c
-
-#------------------------------------------------------------
-
-$(GLOBEXE) : perlglob$(o)
- $(LINK32) $(LINK_FLAGS) $(LIBFILES) -out:$@ -subsystem:$(SUBSYS) \
- perlglob$(o) setargv$(o)
-
-perlglob$(o) : perlglob.c
-
-config.w32 : $(CFGSH_TMPL)
- copy $(CFGSH_TMPL) config.w32
-
-.\config.h : $(CFGH_TMPL)
- -del /f config.h
- copy $(CFGH_TMPL) config.h
-
-..\config.sh : config.w32 $(MINIPERL) config_sh.PL
- $(MINIPERL) -I..\lib config_sh.PL $(CFG_VARS) config.w32 > ..\config.sh
-
-# this target is for when changes to the main config.sh happen
-# edit config.{b,v,g}c and make this target once for each supported
-# compiler (e.g. `dmake CCTYPE=BORLAND regen_config_h`)
-regen_config_h:
- perl config_sh.PL $(CFG_VARS) $(CFGSH_TMPL) > ..\config.sh
- cd ..
- -del /f perl.exe
- perl configpm
- cd win32
- -del /f $(CFGH_TMPL)
- -mkdir $(COREDIR)
- -perl -I..\lib config_h.PL "INST_VER=$(INST_VER)"
- rename config.h $(CFGH_TMPL)
-
-$(CONFIGPM) : $(MINIPERL) ..\config.sh config_h.PL ..\minimod.pl
- cd .. && miniperl configpm
- if exist lib\* $(RCOPY) lib\*.* ..\lib\$(NULL)
- $(XCOPY) ..\*.h $(COREDIR)\*.*
- $(XCOPY) *.h $(COREDIR)\*.*
- $(XCOPY) ..\ext\re\re.pm $(LIBDIR)\*.*
- $(RCOPY) include $(COREDIR)\*.*
- $(MINIPERL) -I..\lib config_h.PL "INST_VER=$(INST_VER)" \
- || $(MAKE) /$(MAKEFLAGS) $(CONFIGPM)
-
-$(MINIPERL) : $(MINIDIR) $(MINI_OBJ)
- $(LINK32) -subsystem:console -out:$@ @<<
- $(LINK_FLAGS) $(LIBFILES) $(MINI_OBJ)
-<<
-
-$(MINIDIR) :
- if not exist "$(MINIDIR)" mkdir "$(MINIDIR)"
-
-$(MINICORE_OBJ) : $(CORE_NOCFG_H)
- $(CC) -c $(CFLAGS) -DPERL_EXTERNAL_GLOB $(OBJOUT_FLAG)$@ ..\$(*F).c
-
-$(MINIWIN32_OBJ) : $(CORE_NOCFG_H)
- $(CC) -c $(CFLAGS) $(OBJOUT_FLAG)$@ $(*F).c
-
-# -DPERL_IMPLICIT_SYS needs C++ for perllib.c
-# This is the only file that depends on perlhost.h, vmem.h, and vdir.h
-!IF "$(USE_IMP_SYS)$(USE_OBJECT)" == "defineundef"
-perllib$(o) : perllib.c .\perlhost.h .\vdir.h .\vmem.h
- $(CC) -c -I. $(CFLAGS_O) $(CXX_FLAG) $(OBJOUT_FLAG)$@ perllib.c
-!ENDIF
-
-# 1. we don't want to rebuild miniperl.exe when config.h changes
-# 2. we don't want to rebuild miniperl.exe with non-default config.h
-$(MINI_OBJ) : $(CORE_NOCFG_H)
-
-$(WIN32_OBJ) : $(CORE_H)
-$(CORE_OBJ) : $(CORE_H)
-$(DLL_OBJ) : $(CORE_H)
-$(X2P_OBJ) : $(CORE_H)
-
-perldll.def : $(MINIPERL) $(CONFIGPM) ..\global.sym ..\pp.sym ..\makedef.pl
- $(MINIPERL) -w ..\makedef.pl PLATFORM=win32 $(OPTIMIZE) $(DEFINES) $(BUILDOPT) \
- CCTYPE=$(CCTYPE) > perldll.def
-
-$(PERLDLL): perldll.def $(PERLDLL_OBJ) $(PERLDLL_RES)
- $(LINK32) -dll -def:perldll.def -base:0x28000000 -out:$@ @<<
- $(LINK_FLAGS) $(DELAYLOAD) $(LIBFILES) $(PERLDLL_OBJ) $(PERLDLL_RES)
-<<
- $(XCOPY) $(PERLIMPLIB) $(COREDIR)
-
-$(MINIMOD) : $(MINIPERL) ..\minimod.pl
- cd .. && miniperl minimod.pl > lib\ExtUtils\Miniperl.pm
-
-..\x2p\a2p$(o) : ..\x2p\a2p.c
- $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\a2p.c
-
-..\x2p\hash$(o) : ..\x2p\hash.c
- $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\hash.c
-
-..\x2p\str$(o) : ..\x2p\str.c
- $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\str.c
-
-..\x2p\util$(o) : ..\x2p\util.c
- $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\util.c
-
-..\x2p\walk$(o) : ..\x2p\walk.c
- $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\walk.c
-
-$(X2P) : $(MINIPERL) $(X2P_OBJ)
- $(MINIPERL) ..\x2p\find2perl.PL
- $(MINIPERL) ..\x2p\s2p.PL
- $(LINK32) -subsystem:console -out:$@ @<<
- $(LINK_FLAGS) $(LIBFILES) $(X2P_OBJ)
-<<
-
-perlmain.c : runperl.c
- copy runperl.c perlmain.c
-
-perlmain$(o) : perlmain.c
- $(CC) $(CFLAGS_O) -UPERLDLL $(OBJOUT_FLAG)$@ -c perlmain.c
-
-$(PERLEXE): $(PERLDLL) $(CONFIGPM) $(PERLEXE_OBJ) $(PERLEXE_RES)
- $(LINK32) -subsystem:console -out:$@ -stack:0x1000000 $(LINK_FLAGS) \
- $(LIBFILES) $(PERLEXE_OBJ) $(SETARGV_OBJ) $(PERLIMPLIB) $(PERLEXE_RES)
- copy $(PERLEXE) $(WPERLEXE)
- $(MINIPERL) -I..\lib bin\exetype.pl $(WPERLEXE) WINDOWS
- copy splittree.pl ..
- $(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)
-
-$(DYNALOADER).c: $(MINIPERL) $(EXTDIR)\DynaLoader\dl_win32.xs $(CONFIGPM)
- if not exist $(AUTODIR) mkdir $(AUTODIR)
- cd $(EXTDIR)\$(*B)
- ..\$(MINIPERL) -I..\..\lib $(*B)_pm.PL
- ..\$(MINIPERL) -I..\..\lib XSLoader_pm.PL
- cd ..\..\win32
- $(XCOPY) $(EXTDIR)\$(*B)\$(*B).pm $(LIBDIR)\$(NULL)
- $(XCOPY) $(EXTDIR)\$(*B)\XSLoader.pm $(LIBDIR)\$(NULL)
- cd $(EXTDIR)\$(*B)
- $(XSUBPP) dl_win32.xs > $(*B).c
- cd ..\..\win32
-
-$(EXTDIR)\DynaLoader\dl_win32.xs: dl_win32.xs
- copy dl_win32.xs $(EXTDIR)\DynaLoader\dl_win32.xs
-
-$(DUMPER_DLL): $(PERLEXE) $(DUMPER).xs
- cd $(EXTDIR)\Data\$(*B)
- ..\..\..\miniperl -I..\..\..\lib Makefile.PL PERL_CORE=1 INSTALLDIRS=perl
- $(MAKE)
- cd ..\..\..\win32
-
-$(DPROF_DLL): $(PERLEXE) $(DPROF).xs
- cd $(EXTDIR)\Devel\$(*B)
- ..\..\..\miniperl -I..\..\..\lib Makefile.PL PERL_CORE=1 INSTALLDIRS=perl
- $(MAKE)
- cd ..\..\..\win32
-
-$(GLOB_DLL): $(PERLEXE) $(GLOB).xs
- cd $(EXTDIR)\File\$(*B)
- ..\..\..\miniperl -I..\..\..\lib Makefile.PL PERL_CORE=1 INSTALLDIRS=perl
- $(MAKE)
- cd ..\..\..\win32
-
-$(PEEK_DLL): $(PERLEXE) $(PEEK).xs
- cd $(EXTDIR)\Devel\$(*B)
- ..\..\..\miniperl -I..\..\..\lib Makefile.PL PERL_CORE=1 INSTALLDIRS=perl
- $(MAKE)
- cd ..\..\..\win32
-
-$(RE_DLL): $(PERLEXE) $(RE).xs
- cd $(EXTDIR)\$(*B)
- ..\..\miniperl -I..\..\lib Makefile.PL PERL_CORE=1 INSTALLDIRS=perl
- $(MAKE)
- cd ..\..\win32
-
-$(B_DLL): $(PERLEXE) $(B).xs
- cd $(EXTDIR)\$(*B)
- ..\..\miniperl -I..\..\lib Makefile.PL PERL_CORE=1 INSTALLDIRS=perl
- $(MAKE)
- cd ..\..\win32
-
-$(THREAD_DLL): $(PERLEXE) $(THREAD).xs
- cd $(EXTDIR)\$(*B)
- ..\..\miniperl -I..\..\lib Makefile.PL PERL_CORE=1 INSTALLDIRS=perl
- $(MAKE)
- cd ..\..\win32
-
-$(ATTRS_DLL): $(PERLEXE) $(ATTRS).xs
- cd $(EXTDIR)\$(*B)
- ..\..\miniperl -I..\..\lib Makefile.PL PERL_CORE=1 INSTALLDIRS=perl
- $(MAKE)
- cd ..\..\win32
-
-$(POSIX_DLL): $(PERLEXE) $(POSIX).xs
- cd $(EXTDIR)\$(*B)
- ..\..\miniperl -I..\..\lib Makefile.PL PERL_CORE=1 INSTALLDIRS=perl
- $(MAKE)
- cd ..\..\win32
-
-$(IO_DLL): $(PERLEXE) $(IO).xs
- cd $(EXTDIR)\$(*B)
- ..\..\miniperl -I..\..\lib Makefile.PL PERL_CORE=1 INSTALLDIRS=perl
- $(MAKE)
- cd ..\..\win32
-
-$(SDBM_FILE_DLL) : $(PERLEXE) $(SDBM_FILE).xs
- cd $(EXTDIR)\$(*B)
- ..\..\miniperl -I..\..\lib Makefile.PL PERL_CORE=1 INSTALLDIRS=perl
- $(MAKE)
- cd ..\..\win32
-
-$(FCNTL_DLL): $(PERLEXE) $(FCNTL).xs
- cd $(EXTDIR)\$(*B)
- ..\..\miniperl -I..\..\lib Makefile.PL PERL_CORE=1 INSTALLDIRS=perl
- $(MAKE)
- cd ..\..\win32
-
-$(OPCODE_DLL): $(PERLEXE) $(OPCODE).xs
- cd $(EXTDIR)\$(*B)
- ..\..\miniperl -I..\..\lib Makefile.PL PERL_CORE=1 INSTALLDIRS=perl
- $(MAKE)
- cd ..\..\win32
-
-$(SOCKET_DLL): $(PERLEXE) $(SOCKET).xs
- cd $(EXTDIR)\$(*B)
- ..\..\miniperl -I..\..\lib Makefile.PL PERL_CORE=1 INSTALLDIRS=perl
- $(MAKE)
- cd ..\..\win32
-
-$(HOSTNAME_DLL): $(PERLEXE) $(HOSTNAME).xs
- cd $(EXTDIR)\Sys\$(*B)
- ..\..\..\miniperl -I..\..\..\lib Makefile.PL PERL_CORE=1 INSTALLDIRS=perl
- $(MAKE)
- cd ..\..\..\win32
-
-$(BYTELOADER_DLL): $(PERLEXE) $(BYTELOADER).xs
- cd $(EXTDIR)\$(*B)
- ..\..\miniperl -I..\..\lib Makefile.PL PERL_CORE=1 INSTALLDIRS=perl
- $(MAKE)
- cd ..\..\win32
-
-$(ERRNO_PM): $(PERLEXE) $(ERRNO)_pm.PL
- cd $(EXTDIR)\$(*B)
- ..\..\miniperl -I..\..\lib Makefile.PL PERL_CORE=1 INSTALLDIRS=perl
- $(MAKE)
- cd ..\..\win32
-
-doc: $(PERLEXE)
- $(PERLEXE) -I..\lib ..\installhtml --podroot=.. --htmldir=./html \
- --podpath=pod:lib:ext:utils --htmlroot="file://$(INST_HTML::=|)" \
- --libpod=perlfunc:perlguts:perlvar:perlrun:perlop --recurse
-
-utils: $(PERLEXE) $(X2P)
- cd ..\utils
- $(MAKE) PERL=$(MINIPERL)
- cd ..\pod
- copy ..\README.aix .\perlaix.pod
- copy ..\README.amiga .\perlamiga.pod
- copy ..\README.bs2000 .\perlbs2000.pod
- copy ..\README.cygwin .\perlcygwin.pod
- copy ..\README.dos .\perldos.pod
- copy ..\README.epoc .\perlepoc.pod
- copy ..\README.hpux .\perlhpux.pod
- copy ..\README.mpeix .\perlmpeix.pod
- copy ..\README.os2 .\perlos2.pod
- copy ..\README.os390 .\perlos390.pod
- copy ..\README.solaris .\perlsolaris.pod
- copy ..\README.vmesa .\perlvmesa.pod
- copy ..\vms\perlvms.pod .\perlvms.pod
- copy ..\README.vos .\perlvos.pod
- copy ..\README.win32 .\perlwin32.pod
- $(MAKE) -f ..\win32\pod.mak converters
- cd ..\win32
- $(PERLEXE) $(PL2BAT) $(UTILS)
-
-distclean: clean
- -del /f $(MINIPERL) $(PERLEXE) $(PERLDLL) $(GLOBEXE) \
- $(PERLIMPLIB) ..\miniperl.lib $(MINIMOD)
- -del /f *.def *.map
- -del /f $(EXTENSION_DLL) $(EXTENSION_PM)
- -del /f $(EXTENSION_C) $(DYNALOADER).c $(ERRNO).pm
- -del /f $(EXTDIR)\DynaLoader\dl_win32.xs $(EXTDIR)\DynaLoader\DynaLoader.pm
- -del /f $(LIBDIR)\.exists $(LIBDIR)\attrs.pm $(LIBDIR)\DynaLoader.pm
- -del /f $(LIBDIR)\XSLoader.pm $(EXTDIR)\DynaLoader\XSLoader.pm
- -del /f $(LIBDIR)\Devel\.exists $(LIBDIR)\File\.exists $(LIBDIR)\Sys\.exists
- -del /f $(LIBDIR)\Fcntl.pm $(LIBDIR)\IO.pm $(LIBDIR)\Opcode.pm
- -del /f $(LIBDIR)\ops.pm $(LIBDIR)\Safe.pm
- -del /f $(LIBDIR)\SDBM_File.pm $(LIBDIR)\Socket.pm $(LIBDIR)\POSIX.pm
- -del /f $(LIBDIR)\B.pm $(EXTDIR)\B\defsubs.h $(LIBDIR)\O.pm $(LIBDIR)\re.pm
- -del /f $(LIBDIR)\Data\Dumper.pm $(LIBDIR)\ByteLoader.pm
- -del /f $(LIBDIR)\Devel\Peek.pm $(LIBDIR)\Devel\DProf.pm
- -del /f $(LIBDIR)\File\Glob.pm
- -if exist $(LIBDIR)\IO rmdir /s /q $(LIBDIR)\IO || rmdir /s $(LIBDIR)\IO
- -if exist $(LIBDIR)\Thread rmdir /s /q $(LIBDIR)\Thread || rmdir /s $(LIBDIR)\Thread
- -if exist $(LIBDIR)\B rmdir /s /q $(LIBDIR)\B || rmdir /s $(LIBDIR)\B
- -if exist $(LIBDIR)\Data rmdir /s /q $(LIBDIR)\Data || rmdir /s $(LIBDIR)\Data
- cd $(PODDIR)
- -del /f *.html *.bat checkpods \
- perlaix.pod perlamiga.pod perlbs2000.pod perlcygwin.pod \
- perldos.pod perlepoc.pod perlhpux.pod perlmachten.pod \
- perlmacos.pod perlmpeix.pod perlos2.pod perlos390.pod \
- perlsolaris.pod perlvmesa.pod perlvms.pod perlvos.pod \
- perlwin32.pod pod2html pod2latex pod2man pod2text pod2usage \
- podchecker podselect
- cd ..\utils
- -del /f h2ph splain perlbug pl2pm c2ph h2xs perldoc dprofpp \
- *.bat perlcc pstruct
- cd ..\win32
- cd ..\x2p
- -del /f find2perl s2p
- -del /f *.bat
- cd ..\win32
- -del /f ..\config.sh ..\splittree.pl perlmain.c dlutils.c config.h.new
- -del /f $(CONFIGPM)
- -del /f bin\*.bat
- cd $(EXTDIR)
- -del /s *.lib *.def *.map *.pdb *.bs Makefile *$(o) pm_to_blib
- cd ..\win32
- -if exist $(AUTODIR) rmdir /s /q $(AUTODIR) || rmdir /s $(AUTODIR)
- -if exist $(COREDIR) rmdir /s /q $(COREDIR) || rmdir /s $(COREDIR)
-
-install : all installbare installhtml
-
-installbare : utils
- $(PERLEXE) ..\installperl
- if exist $(WPERLEXE) $(XCOPY) $(WPERLEXE) $(INST_BIN)\*.*
- $(XCOPY) $(GLOBEXE) $(INST_BIN)\*.*
- $(XCOPY) bin\*.bat $(INST_SCRIPT)\*.*
-
-installhtml : doc
- $(RCOPY) html\*.* $(INST_HTML)\*.*
-
-inst_lib : $(CONFIGPM)
- copy splittree.pl ..
- $(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)
- $(RCOPY) ..\lib $(INST_LIB)\*.*
-
-minitest : $(MINIPERL) $(GLOBEXE) $(CONFIGPM) utils
- $(XCOPY) $(MINIPERL) ..\t\perl.exe
- $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
- attrib -r ..\t\*.*
- copy test ..\t
- cd ..\t
- $(MINIPERL) -I..\lib test base/*.t comp/*.t cmd/*.t io/*.t op/*.t pragma/*.t
- cd ..\win32
-
-test-prep : all utils
- $(XCOPY) $(PERLEXE) ..\t\$(NULL)
- $(XCOPY) $(PERLDLL) ..\t\$(NULL)
- $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
-
-test : test-prep
- cd ..\t
- $(PERLEXE) -I..\lib harness
- cd ..\win32
-
-test-notty : test-prep
- set PERL_SKIP_TTY_TEST=1
- cd ..\t
- $(PERLEXE) -I..\lib harness
- cd ..\win32
-
-test-wide : test-prep
- set HARNESS_PERL_SWITCHES=-C
- cd ..\t
- $(PERLEXE) -I..\lib harness
- cd ..\win32
-
-test-wide-notty : test-prep
- set PERL_SKIP_TTY_TEST=1
- set HARNESS_PERL_SWITCHES=-C
- cd ..\t
- $(PERLEXE) -I..\lib harness
- cd ..\win32
-
-_test :
- $(XCOPY) $(PERLEXE) ..\t\$(NULL)
- $(XCOPY) $(PERLDLL) ..\t\$(NULL)
- $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
- cd ..\t
- $(PERLEXE) -I..\lib harness
- cd ..\win32
-
-clean :
- -@erase miniperlmain$(o)
- -@erase $(MINIPERL)
- -@erase perlglob$(o)
- -@erase perlmain$(o)
- -@erase config.w32
- -@erase /f config.h
- -@erase $(GLOBEXE)
- -@erase $(PERLEXE)
- -@erase $(WPERLEXE)
- -@erase $(PERLDLL)
- -@erase $(CORE_OBJ)
- -if exist $(MINIDIR) rmdir /s /q $(MINIDIR) || rmdir /s $(MINIDIR)
- -@erase $(WIN32_OBJ)
- -@erase $(DLL_OBJ)
- -@erase $(X2P_OBJ)
- -@erase ..\*$(o) ..\*.lib ..\*.exp *$(o) *.lib *.exp *.res
- -@erase ..\t\*.exe ..\t\*.dll ..\t\*.bat
- -@erase ..\x2p\*.exe ..\x2p\*.bat
- -@erase *.ilk
- -@erase *.pdb
-
-# Handy way to run perlbug -ok without having to install and run the
-# installed perlbug. We don't re-run the tests here - we trust the user.
-# Please *don't* use this unless all tests pass.
-# If you want to report test failures, use "nmake nok" instead.
-ok: utils
- $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)"
-
-okfile: utils
- $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)" -F perl.ok
-
-nok: utils
- $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)"
-
-nokfile: utils
- $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)" -F perl.nok
+++ /dev/null
-/*
- * This file was produced by running the config_h.SH script, which
- * gets its values from config.sh, which is generally produced by
- * running Configure.
- *
- * Feel free to modify any of this as the need arises. Note, however,
- * that running config_h.SH again will wipe out any changes you've made.
- * For a more permanent change edit config.sh and rerun config_h.SH.
- *
- * $Id: Config_h.U,v 3.0.1.5 1997/02/28 14:57:43 ram Exp $
- */
-
-/*
- * Package name : perl5
- * Source directory :
- * Configuration time: Fri Oct 5 19:47:34 2001
- * Configured by : nt5admin
- * Target system :
- */
-
-#ifndef _config_h_
-#define _config_h_
-
-/* LOC_SED:
- * This symbol holds the complete pathname to the sed program.
- */
-#define LOC_SED "" /**/
-
-/* HAS_ALARM:
- * This symbol, if defined, indicates that the alarm routine is
- * available.
- */
-/*#define HAS_ALARM /**/
-
-/* HASATTRIBUTE:
- * This symbol indicates the C compiler can check for function attributes,
- * such as printf formats. This is normally only supported by GNU cc.
- */
-/*#define HASATTRIBUTE /**/
-#ifndef HASATTRIBUTE
-#define __attribute__(_arg_)
-#endif
-
-/* HAS_BCMP:
- * This symbol is defined if the bcmp() routine is available to
- * compare blocks of memory.
- */
-/*#define HAS_BCMP /**/
-
-/* HAS_BCOPY:
- * This symbol is defined if the bcopy() routine is available to
- * copy blocks of memory.
- */
-/*#define HAS_BCOPY /**/
-
-/* HAS_BZERO:
- * This symbol is defined if the bzero() routine is available to
- * set a memory block to 0.
- */
-/*#define HAS_BZERO /**/
-
-/* HAS_CHOWN:
- * This symbol, if defined, indicates that the chown routine is
- * available.
- */
-/*#define HAS_CHOWN /**/
-
-/* HAS_CHROOT:
- * This symbol, if defined, indicates that the chroot routine is
- * available.
- */
-/*#define HAS_CHROOT /**/
-
-/* HAS_CHSIZE:
- * This symbol, if defined, indicates that the chsize routine is available
- * to truncate files. You might need a -lx to get this routine.
- */
-#define HAS_CHSIZE /**/
-
-/* HASCONST:
- * This symbol, if defined, indicates that this C compiler knows about
- * the const type. There is no need to actually test for that symbol
- * within your programs. The mere use of the "const" keyword will
- * trigger the necessary tests.
- */
-#define HASCONST /**/
-#ifndef HASCONST
-#define const
-#endif
-
-/* HAS_CRYPT:
- * This symbol, if defined, indicates that the crypt routine is available
- * to encrypt passwords and the like.
- */
-/*#define HAS_CRYPT /**/
-
-/* HAS_CUSERID:
- * This symbol, if defined, indicates that the cuserid routine is
- * available to get character login names.
- */
-/*#define HAS_CUSERID /**/
-
-/* HAS_DBL_DIG:
- * This symbol, if defined, indicates that this system's <float.h>
- * or <limits.h> defines the symbol DBL_DIG, which is the number
- * of significant digits in a double precision number. If this
- * symbol is not defined, a guess of 15 is usually pretty good.
- */
-#define HAS_DBL_DIG /**/
-
-/* HAS_DIFFTIME:
- * This symbol, if defined, indicates that the difftime routine is
- * available.
- */
-#define HAS_DIFFTIME /**/
-
-/* HAS_DLERROR:
- * This symbol, if defined, indicates that the dlerror routine is
- * available to return a string describing the last error that
- * occurred from a call to dlopen(), dlclose() or dlsym().
- */
-#define HAS_DLERROR /**/
-
-/* SETUID_SCRIPTS_ARE_SECURE_NOW:
- * This symbol, if defined, indicates that the bug that prevents
- * setuid scripts from being secure is not present in this kernel.
- */
-/* DOSUID:
- * This symbol, if defined, indicates that the C program should
- * check the script that it is executing for setuid/setgid bits, and
- * attempt to emulate setuid/setgid on systems that have disabled
- * setuid #! scripts because the kernel can't do it securely.
- * It is up to the package designer to make sure that this emulation
- * is done securely. Among other things, it should do an fstat on
- * the script it just opened to make sure it really is a setuid/setgid
- * script, it should make sure the arguments passed correspond exactly
- * to the argument on the #! line, and it should not trust any
- * subprocesses to which it must pass the filename rather than the
- * file descriptor of the script to be executed.
- */
-/*#define SETUID_SCRIPTS_ARE_SECURE_NOW /**/
-/*#define DOSUID /**/
-
-/* HAS_DUP2:
- * This symbol, if defined, indicates that the dup2 routine is
- * available to duplicate file descriptors.
- */
-#define HAS_DUP2 /**/
-
-/* HAS_FCHMOD:
- * This symbol, if defined, indicates that the fchmod routine is available
- * to change mode of opened files. If unavailable, use chmod().
- */
-/*#define HAS_FCHMOD /**/
-
-/* HAS_FCHOWN:
- * This symbol, if defined, indicates that the fchown routine is available
- * to change ownership of opened files. If unavailable, use chown().
- */
-/*#define HAS_FCHOWN /**/
-
-/* HAS_FCNTL:
- * This symbol, if defined, indicates to the C program that
- * the fcntl() function exists.
- */
-/*#define HAS_FCNTL /**/
-
-/* HAS_FGETPOS:
- * This symbol, if defined, indicates that the fgetpos routine is
- * available to get the file position indicator, similar to ftell().
- */
-#define HAS_FGETPOS /**/
-
-/* HAS_FLOCK:
- * This symbol, if defined, indicates that the flock routine is
- * available to do file locking.
- */
-#define HAS_FLOCK /**/
-
-/* HAS_FORK:
- * This symbol, if defined, indicates that the fork routine is
- * available.
- */
-/*#define HAS_FORK /**/
-
-/* HAS_FSETPOS:
- * This symbol, if defined, indicates that the fsetpos routine is
- * available to set the file position indicator, similar to fseek().
- */
-#define HAS_FSETPOS /**/
-
-/* HAS_GETTIMEOFDAY:
- * This symbol, if defined, indicates that the gettimeofday() system
- * call is available for a sub-second accuracy clock. Usually, the file
- * <sys/resource.h> needs to be included (see I_SYS_RESOURCE).
- * The type "Timeval" should be used to refer to "struct timeval".
- */
-/*#define HAS_GETTIMEOFDAY /**/
-#ifdef HAS_GETTIMEOFDAY
-#define Timeval struct timeval /* Structure used by gettimeofday() */
-#endif
-
-/* HAS_GETGROUPS:
- * This symbol, if defined, indicates that the getgroups() routine is
- * available to get the list of process groups. If unavailable, multiple
- * groups are probably not supported.
- */
-/*#define HAS_GETGROUPS /**/
-
-/* HAS_GETLOGIN:
- * This symbol, if defined, indicates that the getlogin routine is
- * available to get the login name.
- */
-#define HAS_GETLOGIN /**/
-
-/* HAS_GETPGID:
- * This symbol, if defined, indicates to the C program that
- * the getpgid(pid) function is available to get the
- * process group id.
- */
-/*#define HAS_GETPGID /**/
-
-/* HAS_GETPGRP2:
- * This symbol, if defined, indicates that the getpgrp2() (as in DG/UX)
- * routine is available to get the current process group.
- */
-/*#define HAS_GETPGRP2 /**/
-
-/* HAS_GETPPID:
- * This symbol, if defined, indicates that the getppid routine is
- * available to get the parent process ID.
- */
-/*#define HAS_GETPPID /**/
-
-/* HAS_GETPRIORITY:
- * This symbol, if defined, indicates that the getpriority routine is
- * available to get a process's priority.
- */
-/*#define HAS_GETPRIORITY /**/
-
-/* HAS_INET_ATON:
- * This symbol, if defined, indicates to the C program that the
- * inet_aton() function is available to parse IP address "dotted-quad"
- * strings.
- */
-/*#define HAS_INET_ATON /**/
-
-/* HAS_KILLPG:
- * This symbol, if defined, indicates that the killpg routine is available
- * to kill process groups. If unavailable, you probably should use kill
- * with a negative process number.
- */
-/*#define HAS_KILLPG /**/
-
-/* HAS_LINK:
- * This symbol, if defined, indicates that the link routine is
- * available to create hard links.
- */
-#define HAS_LINK /**/
-
-/* HAS_LOCALECONV:
- * This symbol, if defined, indicates that the localeconv routine is
- * available for numeric and monetary formatting conventions.
- */
-#define HAS_LOCALECONV /**/
-
-/* HAS_LOCKF:
- * This symbol, if defined, indicates that the lockf routine is
- * available to do file locking.
- */
-/*#define HAS_LOCKF /**/
-
-/* HAS_LSTAT:
- * This symbol, if defined, indicates that the lstat routine is
- * available to do file stats on symbolic links.
- */
-/*#define HAS_LSTAT /**/
-
-/* HAS_MBLEN:
- * This symbol, if defined, indicates that the mblen routine is available
- * to find the number of bytes in a multibye character.
- */
-#define HAS_MBLEN /**/
-
-/* HAS_MBSTOWCS:
- * This symbol, if defined, indicates that the mbstowcs routine is
- * available to covert a multibyte string into a wide character string.
- */
-#define HAS_MBSTOWCS /**/
-
-/* HAS_MBTOWC:
- * This symbol, if defined, indicates that the mbtowc routine is available
- * to covert a multibyte to a wide character.
- */
-#define HAS_MBTOWC /**/
-
-/* HAS_MEMCMP:
- * This symbol, if defined, indicates that the memcmp routine is available
- * to compare blocks of memory.
- */
-#define HAS_MEMCMP /**/
-
-/* HAS_MEMCPY:
- * This symbol, if defined, indicates that the memcpy routine is available
- * to copy blocks of memory.
- */
-#define HAS_MEMCPY /**/
-
-/* HAS_MEMMOVE:
- * This symbol, if defined, indicates that the memmove routine is available
- * to copy potentially overlapping blocks of memory. This should be used
- * only when HAS_SAFE_BCOPY is not defined. If neither is there, roll your
- * own version.
- */
-#define HAS_MEMMOVE /**/
-
-/* HAS_MEMSET:
- * This symbol, if defined, indicates that the memset routine is available
- * to set blocks of memory.
- */
-#define HAS_MEMSET /**/
-
-/* HAS_MKDIR:
- * This symbol, if defined, indicates that the mkdir routine is available
- * to create directories. Otherwise you should fork off a new process to
- * exec /bin/mkdir.
- */
-#define HAS_MKDIR /**/
-
-/* HAS_MKFIFO:
- * This symbol, if defined, indicates that the mkfifo routine is
- * available to create FIFOs. Otherwise, mknod should be able to
- * do it for you. However, if mkfifo is there, mknod might require
- * super-user privileges which mkfifo will not.
- */
-/*#define HAS_MKFIFO /**/
-
-/* HAS_MKTIME:
- * This symbol, if defined, indicates that the mktime routine is
- * available.
- */
-#define HAS_MKTIME /**/
-
-/* HAS_MSYNC:
- * This symbol, if defined, indicates that the msync system call is
- * available to synchronize a mapped file.
- */
-/*#define HAS_MSYNC /**/
-
-/* HAS_MUNMAP:
- * This symbol, if defined, indicates that the munmap system call is
- * available to unmap a region, usually mapped by mmap().
- */
-/*#define HAS_MUNMAP /**/
-
-/* HAS_NICE:
- * This symbol, if defined, indicates that the nice routine is
- * available.
- */
-/*#define HAS_NICE /**/
-
-/* HAS_PATHCONF:
- * This symbol, if defined, indicates that pathconf() is available
- * to determine file-system related limits and options associated
- * with a given filename.
- */
-/* HAS_FPATHCONF:
- * This symbol, if defined, indicates that pathconf() is available
- * to determine file-system related limits and options associated
- * with a given open file descriptor.
- */
-/*#define HAS_PATHCONF /**/
-/*#define HAS_FPATHCONF /**/
-
-/* HAS_PAUSE:
- * This symbol, if defined, indicates that the pause routine is
- * available to suspend a process until a signal is received.
- */
-#define HAS_PAUSE /**/
-
-/* HAS_PIPE:
- * This symbol, if defined, indicates that the pipe routine is
- * available to create an inter-process channel.
- */
-#define HAS_PIPE /**/
-
-/* HAS_POLL:
- * This symbol, if defined, indicates that the poll routine is
- * available to poll active file descriptors. You may safely
- * include <poll.h> when this symbol is defined.
- */
-/*#define HAS_POLL /**/
-
-/* HAS_READDIR:
- * This symbol, if defined, indicates that the readdir routine is
- * available to read directory entries. You may have to include
- * <dirent.h>. See I_DIRENT.
- */
-#define HAS_READDIR /**/
-
-/* HAS_SEEKDIR:
- * This symbol, if defined, indicates that the seekdir routine is
- * available. You may have to include <dirent.h>. See I_DIRENT.
- */
-#define HAS_SEEKDIR /**/
-
-/* HAS_TELLDIR:
- * This symbol, if defined, indicates that the telldir routine is
- * available. You may have to include <dirent.h>. See I_DIRENT.
- */
-#define HAS_TELLDIR /**/
-
-/* HAS_REWINDDIR:
- * This symbol, if defined, indicates that the rewinddir routine is
- * available. You may have to include <dirent.h>. See I_DIRENT.
- */
-#define HAS_REWINDDIR /**/
-
-/* HAS_READLINK:
- * This symbol, if defined, indicates that the readlink routine is
- * available to read the value of a symbolic link.
- */
-/*#define HAS_READLINK /**/
-
-/* HAS_RENAME:
- * This symbol, if defined, indicates that the rename routine is available
- * to rename files. Otherwise you should do the unlink(), link(), unlink()
- * trick.
- */
-#define HAS_RENAME /**/
-
-/* HAS_RMDIR:
- * This symbol, if defined, indicates that the rmdir routine is
- * available to remove directories. Otherwise you should fork off a
- * new process to exec /bin/rmdir.
- */
-#define HAS_RMDIR /**/
-
-/* HAS_SELECT:
- * This symbol, if defined, indicates that the select routine is
- * available to select active file descriptors. If the timeout field
- * is used, <sys/time.h> may need to be included.
- */
-#define HAS_SELECT /**/
-
-/* HAS_SETEGID:
- * This symbol, if defined, indicates that the setegid routine is available
- * to change the effective gid of the current program.
- */
-/*#define HAS_SETEGID /**/
-
-/* HAS_SETEUID:
- * This symbol, if defined, indicates that the seteuid routine is available
- * to change the effective uid of the current program.
- */
-/*#define HAS_SETEUID /**/
-
-/* HAS_SETLINEBUF:
- * This symbol, if defined, indicates that the setlinebuf routine is
- * available to change stderr or stdout from block-buffered or unbuffered
- * to a line-buffered mode.
- */
-/*#define HAS_SETLINEBUF /**/
-
-/* HAS_SETLOCALE:
- * This symbol, if defined, indicates that the setlocale routine is
- * available to handle locale-specific ctype implementations.
- */
-#define HAS_SETLOCALE /**/
-
-/* HAS_SETPGID:
- * This symbol, if defined, indicates that the setpgid(pid, gpid)
- * routine is available to set process group ID.
- */
-/*#define HAS_SETPGID /**/
-
-/* HAS_SETPGRP2:
- * This symbol, if defined, indicates that the setpgrp2() (as in DG/UX)
- * routine is available to set the current process group.
- */
-/*#define HAS_SETPGRP2 /**/
-
-/* HAS_SETPRIORITY:
- * This symbol, if defined, indicates that the setpriority routine is
- * available to set a process's priority.
- */
-/*#define HAS_SETPRIORITY /**/
-
-/* HAS_SETREGID:
- * This symbol, if defined, indicates that the setregid routine is
- * available to change the real and effective gid of the current
- * process.
- */
-/* HAS_SETRESGID:
- * This symbol, if defined, indicates that the setresgid routine is
- * available to change the real, effective and saved gid of the current
- * process.
- */
-/*#define HAS_SETREGID /**/
-/*#define HAS_SETRESGID /**/
-
-/* HAS_SETREUID:
- * This symbol, if defined, indicates that the setreuid routine is
- * available to change the real and effective uid of the current
- * process.
- */
-/* HAS_SETRESUID:
- * This symbol, if defined, indicates that the setresuid routine is
- * available to change the real, effective and saved uid of the current
- * process.
- */
-/*#define HAS_SETREUID /**/
-/*#define HAS_SETRESUID /**/
-
-/* HAS_SETRGID:
- * This symbol, if defined, indicates that the setrgid routine is available
- * to change the real gid of the current program.
- */
-/*#define HAS_SETRGID /**/
-
-/* HAS_SETRUID:
- * This symbol, if defined, indicates that the setruid routine is available
- * to change the real uid of the current program.
- */
-/*#define HAS_SETRUID /**/
-
-/* HAS_SETSID:
- * This symbol, if defined, indicates that the setsid routine is
- * available to set the process group ID.
- */
-/*#define HAS_SETSID /**/
-
-/* Shmat_t:
- * This symbol holds the return type of the shmat() system call.
- * Usually set to 'void *' or 'char *'.
- */
-/* HAS_SHMAT_PROTOTYPE:
- * This symbol, if defined, indicates that the sys/shm.h includes
- * a prototype for shmat(). Otherwise, it is up to the program to
- * guess one. Shmat_t shmat(int, Shmat_t, int) is a good guess,
- * but not always right so it should be emitted by the program only
- * when HAS_SHMAT_PROTOTYPE is not defined to avoid conflicting defs.
- */
-#define Shmat_t void * /**/
-/*#define HAS_SHMAT_PROTOTYPE /**/
-
-/* HAS_STRCHR:
- * This symbol is defined to indicate that the strchr()/strrchr()
- * functions are available for string searching. If not, try the
- * index()/rindex() pair.
- */
-/* HAS_INDEX:
- * This symbol is defined to indicate that the index()/rindex()
- * functions are available for string searching.
- */
-#define HAS_STRCHR /**/
-/*#define HAS_INDEX /**/
-
-/* HAS_STRCOLL:
- * This symbol, if defined, indicates that the strcoll routine is
- * available to compare strings using collating information.
- */
-#define HAS_STRCOLL /**/
-
-/* USE_STRUCT_COPY:
- * This symbol, if defined, indicates that this C compiler knows how
- * to copy structures. If undefined, you'll need to use a block copy
- * routine of some sort instead.
- */
-#define USE_STRUCT_COPY /**/
-
-/* HAS_STRTOD:
- * This symbol, if defined, indicates that the strtod routine is
- * available to provide better numeric string conversion than atof().
- */
-#define HAS_STRTOD /**/
-
-/* HAS_STRTOL:
- * This symbol, if defined, indicates that the strtol routine is available
- * to provide better numeric string conversion than atoi() and friends.
- */
-#define HAS_STRTOL /**/
-
-/* HAS_STRTOUL:
- * This symbol, if defined, indicates that the strtoul routine is
- * available to provide conversion of strings to unsigned long.
- */
-#define HAS_STRTOUL /**/
-
-/* HAS_STRXFRM:
- * This symbol, if defined, indicates that the strxfrm() routine is
- * available to transform strings.
- */
-#define HAS_STRXFRM /**/
-
-/* HAS_SYMLINK:
- * This symbol, if defined, indicates that the symlink routine is available
- * to create symbolic links.
- */
-/*#define HAS_SYMLINK /**/
-
-/* HAS_SYSCALL:
- * This symbol, if defined, indicates that the syscall routine is
- * available to call arbitrary system calls. If undefined, that's tough.
- */
-/*#define HAS_SYSCALL /**/
-
-/* HAS_SYSCONF:
- * This symbol, if defined, indicates that sysconf() is available
- * to determine system related limits and options.
- */
-/*#define HAS_SYSCONF /**/
-
-/* HAS_SYSTEM:
- * This symbol, if defined, indicates that the system routine is
- * available to issue a shell command.
- */
-#define HAS_SYSTEM /**/
-
-/* HAS_TCGETPGRP:
- * This symbol, if defined, indicates that the tcgetpgrp routine is
- * available to get foreground process group ID.
- */
-/*#define HAS_TCGETPGRP /**/
-
-/* HAS_TCSETPGRP:
- * This symbol, if defined, indicates that the tcsetpgrp routine is
- * available to set foreground process group ID.
- */
-/*#define HAS_TCSETPGRP /**/
-
-/* HAS_TRUNCATE:
- * This symbol, if defined, indicates that the truncate routine is
- * available to truncate files.
- */
-/*#define HAS_TRUNCATE /**/
-
-/* HAS_TZNAME:
- * This symbol, if defined, indicates that the tzname[] array is
- * available to access timezone names.
- */
-#define HAS_TZNAME /**/
-
-/* HAS_UMASK:
- * This symbol, if defined, indicates that the umask routine is
- * available to set and get the value of the file creation mask.
- */
-#define HAS_UMASK /**/
-
-/* HASVOLATILE:
- * This symbol, if defined, indicates that this C compiler knows about
- * the volatile declaration.
- */
-#define HASVOLATILE /**/
-#ifndef HASVOLATILE
-#define volatile
-#endif
-
-/* HAS_WAIT4:
- * This symbol, if defined, indicates that wait4() exists.
- */
-/*#define HAS_WAIT4 /**/
-
-/* HAS_WAITPID:
- * This symbol, if defined, indicates that the waitpid routine is
- * available to wait for child process.
- */
-#define HAS_WAITPID /**/
-
-/* HAS_WCSTOMBS:
- * This symbol, if defined, indicates that the wcstombs routine is
- * available to convert wide character strings to multibyte strings.
- */
-#define HAS_WCSTOMBS /**/
-
-/* HAS_WCTOMB:
- * This symbol, if defined, indicates that the wctomb routine is available
- * to covert a wide character to a multibyte.
- */
-#define HAS_WCTOMB /**/
-
-/* I_ARPA_INET:
- * This symbol, if defined, indicates to the C program that it should
- * include <arpa/inet.h> to get inet_addr and friends declarations.
- */
-#define I_ARPA_INET /**/
-
-/* I_DBM:
- * This symbol, if defined, indicates that <dbm.h> exists and should
- * be included.
- */
-/* I_RPCSVC_DBM:
- * This symbol, if defined, indicates that <rpcsvc/dbm.h> exists and
- * should be included.
- */
-/*#define I_DBM /**/
-#define I_RPCSVC_DBM /**/
-
-/* I_DIRENT:
- * This symbol, if defined, indicates to the C program that it should
- * include <dirent.h>. Using this symbol also triggers the definition
- * of the Direntry_t define which ends up being 'struct dirent' or
- * 'struct direct' depending on the availability of <dirent.h>.
- */
-/* DIRNAMLEN:
- * This symbol, if defined, indicates to the C program that the length
- * of directory entry names is provided by a d_namlen field. Otherwise
- * you need to do strlen() on the d_name field.
- */
-/* Direntry_t:
- * This symbol is set to 'struct direct' or 'struct dirent' depending on
- * whether dirent is available or not. You should use this pseudo type to
- * portably declare your directory entries.
- */
-#define I_DIRENT /**/
-#define DIRNAMLEN /**/
-#define Direntry_t struct direct
-
-/* I_DLFCN:
- * This symbol, if defined, indicates that <dlfcn.h> exists and should
- * be included.
- */
-#define I_DLFCN /**/
-
-/* I_FCNTL:
- * This manifest constant tells the C program to include <fcntl.h>.
- */
-#define I_FCNTL /**/
-
-/* I_FLOAT:
- * This symbol, if defined, indicates to the C program that it should
- * include <float.h> to get definition of symbols like DBL_MAX or
- * DBL_MIN, i.e. machine dependent floating point values.
- */
-#define I_FLOAT /**/
-
-/* I_LIMITS:
- * This symbol, if defined, indicates to the C program that it should
- * include <limits.h> to get definition of symbols like WORD_BIT or
- * LONG_MAX, i.e. machine dependant limitations.
- */
-#define I_LIMITS /**/
-
-/* I_LOCALE:
- * This symbol, if defined, indicates to the C program that it should
- * include <locale.h>.
- */
-#define I_LOCALE /**/
-
-/* I_MATH:
- * This symbol, if defined, indicates to the C program that it should
- * include <math.h>.
- */
-#define I_MATH /**/
-
-/* I_MEMORY:
- * This symbol, if defined, indicates to the C program that it should
- * include <memory.h>.
- */
-/*#define I_MEMORY /**/
-
-/* I_NDBM:
- * This symbol, if defined, indicates that <ndbm.h> exists and should
- * be included.
- */
-/*#define I_NDBM /**/
-
-/* I_NET_ERRNO:
- * This symbol, if defined, indicates that <net/errno.h> exists and
- * should be included.
- */
-/*#define I_NET_ERRNO /**/
-
-/* I_NETINET_IN:
- * This symbol, if defined, indicates to the C program that it should
- * include <netinet/in.h>. Otherwise, you may try <sys/in.h>.
- */
-/*#define I_NETINET_IN /**/
-
-/* I_SFIO:
- * This symbol, if defined, indicates to the C program that it should
- * include <sfio.h>.
- */
-/*#define I_SFIO /**/
-
-/* I_STDDEF:
- * This symbol, if defined, indicates that <stddef.h> exists and should
- * be included.
- */
-#define I_STDDEF /**/
-
-/* I_STDLIB:
- * This symbol, if defined, indicates that <stdlib.h> exists and should
- * be included.
- */
-#define I_STDLIB /**/
-
-/* I_STRING:
- * This symbol, if defined, indicates to the C program that it should
- * include <string.h> (USG systems) instead of <strings.h> (BSD systems).
- */
-#define I_STRING /**/
-
-/* I_SYS_DIR:
- * This symbol, if defined, indicates to the C program that it should
- * include <sys/dir.h>.
- */
-/*#define I_SYS_DIR /**/
-
-/* I_SYS_FILE:
- * This symbol, if defined, indicates to the C program that it should
- * include <sys/file.h> to get definition of R_OK and friends.
- */
-/*#define I_SYS_FILE /**/
-
-/* I_SYS_IOCTL:
- * This symbol, if defined, indicates that <sys/ioctl.h> exists and should
- * be included. Otherwise, include <sgtty.h> or <termio.h>.
- */
-/*#define I_SYS_IOCTL /**/
-
-/* I_SYS_NDIR:
- * This symbol, if defined, indicates to the C program that it should
- * include <sys/ndir.h>.
- */
-/*#define I_SYS_NDIR /**/
-
-/* I_SYS_PARAM:
- * This symbol, if defined, indicates to the C program that it should
- * include <sys/param.h>.
- */
-/*#define I_SYS_PARAM /**/
-
-/* I_SYS_RESOURCE:
- * This symbol, if defined, indicates to the C program that it should
- * include <sys/resource.h>.
- */
-/*#define I_SYS_RESOURCE /**/
-
-/* I_SYS_SELECT:
- * This symbol, if defined, indicates to the C program that it should
- * include <sys/select.h> in order to get definition of struct timeval.
- */
-/*#define I_SYS_SELECT /**/
-
-/* I_SYS_STAT:
- * This symbol, if defined, indicates to the C program that it should
- * include <sys/stat.h>.
- */
-#define I_SYS_STAT /**/
-
-/* I_SYS_TIMES:
- * This symbol, if defined, indicates to the C program that it should
- * include <sys/times.h>.
- */
-/*#define I_SYS_TIMES /**/
-
-/* I_SYS_TYPES:
- * This symbol, if defined, indicates to the C program that it should
- * include <sys/types.h>.
- */
-#define I_SYS_TYPES /**/
-
-/* I_SYS_UN:
- * This symbol, if defined, indicates to the C program that it should
- * include <sys/un.h> to get UNIX domain socket definitions.
- */
-/*#define I_SYS_UN /**/
-
-/* I_SYS_WAIT:
- * This symbol, if defined, indicates to the C program that it should
- * include <sys/wait.h>.
- */
-/*#define I_SYS_WAIT /**/
-
-/* I_TERMIO:
- * This symbol, if defined, indicates that the program should include
- * <termio.h> rather than <sgtty.h>. There are also differences in
- * the ioctl() calls that depend on the value of this symbol.
- */
-/* I_TERMIOS:
- * This symbol, if defined, indicates that the program should include
- * the POSIX termios.h rather than sgtty.h or termio.h.
- * There are also differences in the ioctl() calls that depend on the
- * value of this symbol.
- */
-/* I_SGTTY:
- * This symbol, if defined, indicates that the program should include
- * <sgtty.h> rather than <termio.h>. There are also differences in
- * the ioctl() calls that depend on the value of this symbol.
- */
-/*#define I_TERMIO /**/
-/*#define I_TERMIOS /**/
-/*#define I_SGTTY /**/
-
-/* I_UNISTD:
- * This symbol, if defined, indicates to the C program that it should
- * include <unistd.h>.
- */
-/*#define I_UNISTD /**/
-
-/* I_UTIME:
- * This symbol, if defined, indicates to the C program that it should
- * include <utime.h>.
- */
-#define I_UTIME /**/
-
-/* I_VALUES:
- * This symbol, if defined, indicates to the C program that it should
- * include <values.h> to get definition of symbols like MINFLOAT or
- * MAXLONG, i.e. machine dependant limitations. Probably, you
- * should use <limits.h> instead, if it is available.
- */
-/*#define I_VALUES /**/
-
-/* I_STDARG:
- * This symbol, if defined, indicates that <stdarg.h> exists and should
- * be included.
- */
-/* I_VARARGS:
- * This symbol, if defined, indicates to the C program that it should
- * include <varargs.h>.
- */
-#define I_STDARG /**/
-/*#define I_VARARGS /**/
-
-/* I_VFORK:
- * This symbol, if defined, indicates to the C program that it should
- * include vfork.h.
- */
-/*#define I_VFORK /**/
-
-/* CAN_PROTOTYPE:
- * If defined, this macro indicates that the C compiler can handle
- * function prototypes.
- */
-#define CAN_PROTOTYPE /**/
-
-/* SH_PATH:
- * This symbol contains the full pathname to the shell used on this
- * on this system to execute Bourne shell scripts. Usually, this will be
- * /bin/sh, though it's possible that some systems will have /bin/ksh,
- * /bin/pdksh, /bin/ash, /bin/bash, or even something such as
- * D:/bin/sh.exe.
- */
-#define SH_PATH "cmd /x /c" /**/
-
-/* CROSSCOMPILE:
- * This symbol, if defined, signifies that we our
- * build process is a cross-compilation.
- */
-/*#define CROSSCOMPILE /**/
-
-/* INTSIZE:
- * This symbol contains the value of sizeof(int) so that the C
- * preprocessor can make decisions based on it.
- */
-/* LONGSIZE:
- * This symbol contains the value of sizeof(long) so that the C
- * preprocessor can make decisions based on it.
- */
-/* SHORTSIZE:
- * This symbol contains the value of sizeof(short) so that the C
- * preprocessor can make decisions based on it.
- */
-#define INTSIZE 4 /**/
-#define LONGSIZE 4 /**/
-#define SHORTSIZE 2 /**/
-
-/* MULTIARCH:
- * This symbol, if defined, signifies that the build
- * process will produce some binary files that are going to be
- * used in a cross-platform environment. This is the case for
- * example with the NeXT "fat" binaries that contain executables
- * for several CPUs.
- */
-/*#define MULTIARCH /**/
-
-/* HAS_QUAD:
- * This symbol, if defined, tells that there's a 64-bit integer type,
- * Quad_t, and its unsigned counterpar, Uquad_t. QUADKIND will be one
- * of QUAD_IS_INT, QUAD_IS_LONG, QUAD_IS_LONG_LONG, or QUAD_IS_INT64_T.
- */
-#define HAS_QUAD /**/
-#ifdef HAS_QUAD
-# define Quad_t __int64 /**/
-# define Uquad_t unsigned __int64 /**/
-# define QUADKIND 4 /**/
-# define QUAD_IS_INT 1
-# define QUAD_IS_LONG 2
-# define QUAD_IS_LONG_LONG 3
-# define QUAD_IS_INT64_T 4
-#endif
-
-/* HAS_ACCESSX:
- * This symbol, if defined, indicates that the accessx routine is
- * available to do extended access checks.
- */
-/*#define HAS_ACCESSX /**/
-
-/* HAS_EACCESS:
- * This symbol, if defined, indicates that the eaccess routine is
- * available to do extended access checks.
- */
-/*#define HAS_EACCESS /**/
-
-/* I_SYS_ACCESS:
- * This symbol, if defined, indicates to the C program that it should
- * include <sys/access.h>.
- */
-/*#define I_SYS_ACCESS /**/
-
-/* I_SYS_SECURITY:
- * This symbol, if defined, indicates to the C program that it should
- * include <sys/security.h>.
- */
-/*#define I_SYS_SECURITY /**/
-
-/* OSNAME:
- * This symbol contains the name of the operating system, as determined
- * by Configure. You shouldn't rely on it too much; the specific
- * feature tests from Configure are generally more reliable.
- */
-#define OSNAME "MSWin32" /**/
-
-/* MEM_ALIGNBYTES:
- * This symbol contains the number of bytes required to align a
- * double, or a long double when applicable. Usual values are 2,
- * 4 and 8. The default is eight, for safety.
- */
-#if defined(CROSSCOMPILE) || defined(MULTIARCH)
-# define MEM_ALIGNBYTES 8
-#else
-#define MEM_ALIGNBYTES 8
-#endif
-
-/* ARCHLIB:
- * This variable, if defined, holds the name of the directory in
- * which the user wants to put architecture-dependent public
- * library files for perl5. It is most often a local directory
- * such as /usr/local/lib. Programs using this variable must be
- * prepared to deal with filename expansion. If ARCHLIB is the
- * same as PRIVLIB, it is not defined, since presumably the
- * program already searches PRIVLIB.
- */
-/* ARCHLIB_EXP:
- * This symbol contains the ~name expanded version of ARCHLIB, to be used
- * in programs that are not prepared to deal with ~ expansion at run-time.
- */
-#define ARCHLIB "c:\\perl64\\5.6.1\\lib\\MSWin32-IA64" /**/
-/*#define ARCHLIB_EXP "" /**/
-
-/* ARCHNAME:
- * This symbol holds a string representing the architecture name.
- * It may be used to construct an architecture-dependant pathname
- * where library files may be held under a private library, for
- * instance.
- */
-#define ARCHNAME "MSWin32-IA64" /**/
-
-/* HAS_ATOLF:
- * This symbol, if defined, indicates that the atolf routine is
- * available to convert strings into long doubles.
- */
-/*#define HAS_ATOLF /**/
-
-/* HAS_ATOLL:
- * This symbol, if defined, indicates that the atoll routine is
- * available to convert strings into long longs.
- */
-/*#define HAS_ATOLL /**/
-
-/* BIN:
- * This symbol holds the path of the bin directory where the package will
- * be installed. Program must be prepared to deal with ~name substitution.
- */
-/* BIN_EXP:
- * This symbol is the filename expanded version of the BIN symbol, for
- * programs that do not want to deal with that at run-time.
- */
-#define BIN "c:\\perl64\\5.6.1\\bin\\MSWin32-IA64" /**/
-#define BIN_EXP "c:\\perl64\\5.6.1\\bin\\MSWin32-IA64" /**/
-
-/* PERL_BINCOMPAT_5005:
- * This symbol, if defined, indicates that this version of Perl should be
- * binary-compatible with Perl 5.005. This is impossible for builds
- * that use features like threads and multiplicity it is always undef
- * for those versions.
- */
-/*#define PERL_BINCOMPAT_5005 /**/
-
-/* BYTEORDER:
- * This symbol holds the hexadecimal constant defined in byteorder,
- * i.e. 0x1234 or 0x4321, etc...
- * If the compiler supports cross-compiling or multiple-architecture
- * binaries (eg. on NeXT systems), use compiler-defined macros to
- * determine the byte order.
- * On NeXT 3.2 (and greater), you can build "Fat" Multiple Architecture
- * Binaries (MAB) on either big endian or little endian machines.
- * The endian-ness is available at compile-time. This only matters
- * for perl, where the config.h can be generated and installed on
- * one system, and used by a different architecture to build an
- * extension. Older versions of NeXT that might not have
- * defined either *_ENDIAN__ were all on Motorola 680x0 series,
- * so the default case (for NeXT) is big endian to catch them.
- * This might matter for NeXT 3.0.
- */
-#if defined(CROSSCOMPILE) || defined(MULTIARCH)
-# ifdef __LITTLE_ENDIAN__
-# if LONGSIZE == 4
-# define BYTEORDER 0x1234
-# else
-# if LONGSIZE == 8
-# define BYTEORDER 0x12345678
-# endif
-# endif
-# else
-# ifdef __BIG_ENDIAN__
-# if LONGSIZE == 4
-# define BYTEORDER 0x4321
-# else
-# if LONGSIZE == 8
-# define BYTEORDER 0x87654321
-# endif
-# endif
-# endif
-# endif
-# if !defined(BYTEORDER) && (defined(NeXT) || defined(__NeXT__))
-# define BYTEORDER 0x4321
-# endif
-#else
-#define BYTEORDER 0x12345678 /* large digits for MSB */
-#endif /* NeXT */
-
-/* CAT2:
- * This macro catenates 2 tokens together.
- */
-/* STRINGIFY:
- * This macro surrounds its token with double quotes.
- */
-#if 42 == 1
-#define CAT2(a,b) a/**/b
-#define STRINGIFY(a) "a"
- /* If you can get stringification with catify, tell me how! */
-#endif
-#if 42 == 42
-#define PeRl_CaTiFy(a, b) a ## b
-#define PeRl_StGiFy(a) #a
-/* the additional level of indirection enables these macros to be
- * used as arguments to other macros. See K&R 2nd ed., page 231. */
-#define CAT2(a,b) PeRl_CaTiFy(a,b)
-#define StGiFy(a) PeRl_StGiFy(a)
-#define STRINGIFY(a) PeRl_StGiFy(a)
-#endif
-#if 42 != 1 && 42 != 42
-# include "Bletch: How does this C preprocessor catenate tokens?"
-#endif
-
-/* CPPSTDIN:
- * This symbol contains the first part of the string which will invoke
- * the C preprocessor on the standard input and produce to standard
- * output. Typical value of "cc -E" or "/lib/cpp", but it can also
- * call a wrapper. See CPPRUN.
- */
-/* CPPMINUS:
- * This symbol contains the second part of the string which will invoke
- * the C preprocessor on the standard input and produce to standard
- * output. This symbol will have the value "-" if CPPSTDIN needs a minus
- * to specify standard input, otherwise the value is "".
- */
-/* CPPRUN:
- * This symbol contains the string which will invoke a C preprocessor on
- * the standard input and produce to standard output. It needs to end
- * with CPPLAST, after all other preprocessor flags have been specified.
- * The main difference with CPPSTDIN is that this program will never be a
- * pointer to a shell wrapper, i.e. it will be empty if no preprocessor is
- * available directly to the user. Note that it may well be different from
- * the preprocessor used to compile the C program.
- */
-/* CPPLAST:
- * This symbol is intended to be used along with CPPRUN in the same manner
- * symbol CPPMINUS is used with CPPSTDIN. It contains either "-" or "".
- */
-#define CPPSTDIN "cl -nologo -E"
-#define CPPMINUS ""
-#define CPPRUN "cl -nologo -E"
-#define CPPLAST ""
-
-/* HAS_ACCESS:
- * This manifest constant lets the C program know that the access()
- * system call is available to check for accessibility using real UID/GID.
- * (always present on UNIX.)
- */
-#define HAS_ACCESS /**/
-
-/* CASTI32:
- * This symbol is defined if the C compiler can cast negative
- * or large floating point numbers to 32-bit ints.
- */
-/*#define CASTI32 /**/
-
-/* CASTNEGFLOAT:
- * This symbol is defined if the C compiler can cast negative
- * numbers to unsigned longs, ints and shorts.
- */
-/* CASTFLAGS:
- * This symbol contains flags that say what difficulties the compiler
- * has casting odd floating values to unsigned long:
- * 0 = ok
- * 1 = couldn't cast < 0
- * 2 = couldn't cast >= 0x80000000
- * 4 = couldn't cast in argument expression list
- */
-#define CASTNEGFLOAT /**/
-#define CASTFLAGS 0 /**/
-
-/* VOID_CLOSEDIR:
- * This symbol, if defined, indicates that the closedir() routine
- * does not return a value.
- */
-/*#define VOID_CLOSEDIR /**/
-
-/* HAS_CSH:
- * This symbol, if defined, indicates that the C-shell exists.
- */
-/* CSH:
- * This symbol, if defined, contains the full pathname of csh.
- */
-/*#define HAS_CSH /**/
-#ifdef HAS_CSH
-#define CSH "" /**/
-#endif
-
-/* DLSYM_NEEDS_UNDERSCORE:
- * This symbol, if defined, indicates that we need to prepend an
- * underscore to the symbol name before calling dlsym(). This only
- * makes sense if you *have* dlsym, which we will presume is the
- * case if you're using dl_dlopen.xs.
- */
-/*#define DLSYM_NEEDS_UNDERSCORE /**/
-
-/* HAS_DRAND48_PROTO:
- * This symbol, if defined, indicates that the system provides
- * a prototype for the drand48() function. Otherwise, it is up
- * to the program to supply one. A good guess is
- * extern double drand48(void);
- */
-/*#define HAS_DRAND48_PROTO /**/
-
-/* HAS_ENDGRENT:
- * This symbol, if defined, indicates that the getgrent routine is
- * available for finalizing sequential access of the group database.
- */
-/*#define HAS_ENDGRENT /**/
-
-/* HAS_ENDHOSTENT:
- * This symbol, if defined, indicates that the endhostent() routine is
- * available to close whatever was being used for host queries.
- */
-/*#define HAS_ENDHOSTENT /**/
-
-/* HAS_ENDNETENT:
- * This symbol, if defined, indicates that the endnetent() routine is
- * available to close whatever was being used for network queries.
- */
-/*#define HAS_ENDNETENT /**/
-
-/* HAS_ENDPROTOENT:
- * This symbol, if defined, indicates that the endprotoent() routine is
- * available to close whatever was being used for protocol queries.
- */
-/*#define HAS_ENDPROTOENT /**/
-
-/* HAS_ENDPWENT:
- * This symbol, if defined, indicates that the getgrent routine is
- * available for finalizing sequential access of the passwd database.
- */
-/*#define HAS_ENDPWENT /**/
-
-/* HAS_ENDSERVENT:
- * This symbol, if defined, indicates that the endservent() routine is
- * available to close whatever was being used for service queries.
- */
-/*#define HAS_ENDSERVENT /**/
-
-/* HAS_FD_SET:
- * This symbol, when defined, indicates presence of the fd_set typedef
- * in <sys/types.h>
- */
-#define HAS_FD_SET /**/
-
-/* FLEXFILENAMES:
- * This symbol, if defined, indicates that the system supports filenames
- * longer than 14 characters.
- */
-#define FLEXFILENAMES /**/
-
-/* HAS_FPOS64_T:
- * This symbol will be defined if the C compiler supports fpos64_t.
- */
-/*#define HAS_FPOS64_T /**/
-
-/* HAS_FREXPL:
- * This symbol, if defined, indicates that the frexpl routine is
- * available to break a long double floating-point number into
- * a normalized fraction and an integral power of 2.
- */
-/*#define HAS_FREXPL /**/
-
-/* HAS_STRUCT_FS_DATA:
- * This symbol, if defined, indicates that the struct fs_data
- * to do statfs() is supported.
- */
-/*#define HAS_STRUCT_FS_DATA /**/
-
-/* HAS_FSEEKO:
- * This symbol, if defined, indicates that the fseeko routine is
- * available to fseek beyond 32 bits (useful for ILP32 hosts).
- */
-/*#define HAS_FSEEKO /**/
-
-/* HAS_FSTATFS:
- * This symbol, if defined, indicates that the fstatfs routine is
- * available to stat filesystems by file descriptors.
- */
-/*#define HAS_FSTATFS /**/
-
-/* HAS_FTELLO:
- * This symbol, if defined, indicates that the ftello routine is
- * available to ftell beyond 32 bits (useful for ILP32 hosts).
- */
-/*#define HAS_FTELLO /**/
-
-/* Gconvert:
- * This preprocessor macro is defined to convert a floating point
- * number to a string without a trailing decimal point. This
- * emulates the behavior of sprintf("%g"), but is sometimes much more
- * efficient. If gconvert() is not available, but gcvt() drops the
- * trailing decimal point, then gcvt() is used. If all else fails,
- * a macro using sprintf("%g") is used. Arguments for the Gconvert
- * macro are: value, number of digits, whether trailing zeros should
- * be retained, and the output buffer.
- * Possible values are:
- * d_Gconvert='gconvert((x),(n),(t),(b))'
- * d_Gconvert='gcvt((x),(n),(b))'
- * d_Gconvert='sprintf((b),"%.*g",(n),(x))'
- * The last two assume trailing zeros should not be kept.
- */
-#define Gconvert(x,n,t,b) sprintf((b),"%.*g",(n),(x))
-
-/* HAS_GETCWD:
- * This symbol, if defined, indicates that the getcwd routine is
- * available to get the current working directory.
- */
-/*#define HAS_GETCWD /**/
-
-/* HAS_GETESPWNAM:
- * This symbol, if defined, indicates that the getespwnam system call is
- * available to retrieve enchanced (shadow) password entries by name.
- */
-/*#define HAS_GETESPWNAM /**/
-
-/* HAS_GETFSSTAT:
- * This symbol, if defined, indicates that the getfsstat routine is
- * available to stat filesystems in bulk.
- */
-/*#define HAS_GETFSSTAT /**/
-
-/* HAS_GETGRENT:
- * This symbol, if defined, indicates that the getgrent routine is
- * available for sequential access of the group database.
- */
-/*#define HAS_GETGRENT /**/
-
-/* HAS_GETHOSTBYADDR:
- * This symbol, if defined, indicates that the gethostbyaddr() routine is
- * available to look up hosts by their IP addresses.
- */
-#define HAS_GETHOSTBYADDR /**/
-
-/* HAS_GETHOSTBYNAME:
- * This symbol, if defined, indicates that the gethostbyname() routine is
- * available to look up host names in some data base or other.
- */
-#define HAS_GETHOSTBYNAME /**/
-
-/* HAS_GETHOSTENT:
- * This symbol, if defined, indicates that the gethostent() routine is
- * available to look up host names in some data base or another.
- */
-/*#define HAS_GETHOSTENT /**/
-
-/* HAS_GETHOSTNAME:
- * This symbol, if defined, indicates that the C program may use the
- * gethostname() routine to derive the host name. See also HAS_UNAME
- * and PHOSTNAME.
- */
-/* HAS_UNAME:
- * This symbol, if defined, indicates that the C program may use the
- * uname() routine to derive the host name. See also HAS_GETHOSTNAME
- * and PHOSTNAME.
- */
-/* PHOSTNAME:
- * This symbol, if defined, indicates the command to feed to the
- * popen() routine to derive the host name. See also HAS_GETHOSTNAME
- * and HAS_UNAME. Note that the command uses a fully qualified path,
- * so that it is safe even if used by a process with super-user
- * privileges.
- */
-/* HAS_PHOSTNAME:
- * This symbol, if defined, indicates that the C program may use the
- * contents of PHOSTNAME as a command to feed to the popen() routine
- * to derive the host name.
- */
-#define HAS_GETHOSTNAME /**/
-#define HAS_UNAME /**/
-/*#define HAS_PHOSTNAME /**/
-#ifdef HAS_PHOSTNAME
-#define PHOSTNAME "" /* How to get the host name */
-#endif
-
-/* HAS_GETHOST_PROTOS:
- * This symbol, if defined, indicates that <netdb.h> includes
- * prototypes for gethostent(), gethostbyname(), and
- * gethostbyaddr(). Otherwise, it is up to the program to guess
- * them. See netdbtype.U for probing for various Netdb_xxx_t types.
- */
-#define HAS_GETHOST_PROTOS /**/
-
-/* HAS_GETMNT:
- * This symbol, if defined, indicates that the getmnt routine is
- * available to get filesystem mount info by filename.
- */
-/*#define HAS_GETMNT /**/
-
-/* HAS_GETMNTENT:
- * This symbol, if defined, indicates that the getmntent routine is
- * available to iterate through mounted file systems to get their info.
- */
-/*#define HAS_GETMNTENT /**/
-
-/* HAS_GETNETBYADDR:
- * This symbol, if defined, indicates that the getnetbyaddr() routine is
- * available to look up networks by their IP addresses.
- */
-/*#define HAS_GETNETBYADDR /**/
-
-/* HAS_GETNETBYNAME:
- * This symbol, if defined, indicates that the getnetbyname() routine is
- * available to look up networks by their names.
- */
-/*#define HAS_GETNETBYNAME /**/
-
-/* HAS_GETNETENT:
- * This symbol, if defined, indicates that the getnetent() routine is
- * available to look up network names in some data base or another.
- */
-/*#define HAS_GETNETENT /**/
-
-/* HAS_GETNET_PROTOS:
- * This symbol, if defined, indicates that <netdb.h> includes
- * prototypes for getnetent(), getnetbyname(), and
- * getnetbyaddr(). Otherwise, it is up to the program to guess
- * them. See netdbtype.U for probing for various Netdb_xxx_t types.
- */
-/*#define HAS_GETNET_PROTOS /**/
-
-/* HAS_GETPAGESIZE:
- * This symbol, if defined, indicates that the getpagesize system call
- * is available to get system page size, which is the granularity of
- * many memory management calls.
- */
-/*#define HAS_GETPAGESIZE /**/
-
-/* HAS_GETPROTOENT:
- * This symbol, if defined, indicates that the getprotoent() routine is
- * available to look up protocols in some data base or another.
- */
-/*#define HAS_GETPROTOENT /**/
-
-/* HAS_GETPROTOBYNAME:
- * This symbol, if defined, indicates that the getprotobyname()
- * routine is available to look up protocols by their name.
- */
-/* HAS_GETPROTOBYNUMBER:
- * This symbol, if defined, indicates that the getprotobynumber()
- * routine is available to look up protocols by their number.
- */
-#define HAS_GETPROTOBYNAME /**/
-#define HAS_GETPROTOBYNUMBER /**/
-
-/* HAS_GETPROTO_PROTOS:
- * This symbol, if defined, indicates that <netdb.h> includes
- * prototypes for getprotoent(), getprotobyname(), and
- * getprotobyaddr(). Otherwise, it is up to the program to guess
- * them. See netdbtype.U for probing for various Netdb_xxx_t types.
- */
-#define HAS_GETPROTO_PROTOS /**/
-
-/* HAS_GETPRPWNAM:
- * This symbol, if defined, indicates that the getprpwnam system call is
- * available to retrieve protected (shadow) password entries by name.
- */
-/*#define HAS_GETPRPWNAM /**/
-
-/* HAS_GETPWENT:
- * This symbol, if defined, indicates that the getpwent routine is
- * available for sequential access of the passwd database.
- * If this is not available, the older getpw() function may be available.
- */
-/*#define HAS_GETPWENT /**/
-
-/* HAS_GETSERVENT:
- * This symbol, if defined, indicates that the getservent() routine is
- * available to look up network services in some data base or another.
- */
-/*#define HAS_GETSERVENT /**/
-
-/* HAS_GETSERV_PROTOS:
- * This symbol, if defined, indicates that <netdb.h> includes
- * prototypes for getservent(), getservbyname(), and
- * getservbyaddr(). Otherwise, it is up to the program to guess
- * them. See netdbtype.U for probing for various Netdb_xxx_t types.
- */
-#define HAS_GETSERV_PROTOS /**/
-
-/* HAS_GETSPNAM:
- * This symbol, if defined, indicates that the getspnam system call is
- * available to retrieve SysV shadow password entries by name.
- */
-/*#define HAS_GETSPNAM /**/
-
-/* HAS_GETSERVBYNAME:
- * This symbol, if defined, indicates that the getservbyname()
- * routine is available to look up services by their name.
- */
-/* HAS_GETSERVBYPORT:
- * This symbol, if defined, indicates that the getservbyport()
- * routine is available to look up services by their port.
- */
-#define HAS_GETSERVBYNAME /**/
-#define HAS_GETSERVBYPORT /**/
-
-/* HAS_GNULIBC:
- * This symbol, if defined, indicates to the C program that
- * the GNU C library is being used.
- */
-/*#define HAS_GNULIBC /**/
-#if defined(HAS_GNULIBC) && !defined(_GNU_SOURCE)
-# define _GNU_SOURCE
-#endif
-/* HAS_HASMNTOPT:
- * This symbol, if defined, indicates that the hasmntopt routine is
- * available to query the mount options of file systems.
- */
-/*#define HAS_HASMNTOPT /**/
-
-/* HAS_HTONL:
- * This symbol, if defined, indicates that the htonl() routine (and
- * friends htons() ntohl() ntohs()) are available to do network
- * order byte swapping.
- */
-/* HAS_HTONS:
- * This symbol, if defined, indicates that the htons() routine (and
- * friends htonl() ntohl() ntohs()) are available to do network
- * order byte swapping.
- */
-/* HAS_NTOHL:
- * This symbol, if defined, indicates that the ntohl() routine (and
- * friends htonl() htons() ntohs()) are available to do network
- * order byte swapping.
- */
-/* HAS_NTOHS:
- * This symbol, if defined, indicates that the ntohs() routine (and
- * friends htonl() htons() ntohl()) are available to do network
- * order byte swapping.
- */
-#define HAS_HTONL /**/
-#define HAS_HTONS /**/
-#define HAS_NTOHL /**/
-#define HAS_NTOHS /**/
-
-/* HAS_ICONV:
- * This symbol, if defined, indicates that the iconv routine is
- * available to do character set conversions.
- */
-/*#define HAS_ICONV /**/
-
-/* HAS_INT64_T:
- * This symbol will defined if the C compiler supports int64_t.
- * Usually the <inttypes.h> needs to be included, but sometimes
- * <sys/types.h> is enough.
- */
-/*#define HAS_INT64_T /**/
-
-/* HAS_ISASCII:
- * This manifest constant lets the C program know that isascii
- * is available.
- */
-#define HAS_ISASCII /**/
-
-/* HAS_ISNAN:
- * This symbol, if defined, indicates that the isnan routine is
- * available to check whether a double is a NaN.
- */
-#define HAS_ISNAN /**/
-
-/* HAS_ISNANL:
- * This symbol, if defined, indicates that the isnanl routine is
- * available to check whether a long double is a NaN.
- */
-/*#define HAS_ISNANL /**/
-
-/* HAS_LCHOWN:
- * This symbol, if defined, indicates that the lchown routine is
- * available to operate on a symbolic link (instead of following the
- * link).
- */
-/*#define HAS_LCHOWN /**/
-
-/* HAS_LDBL_DIG:
- * This symbol, if defined, indicates that this system's <float.h>
- * or <limits.h> defines the symbol LDBL_DIG, which is the number
- * of significant digits in a long double precision number. Unlike
- * for DBL_DIG, there's no good guess for LDBL_DIG if it is undefined.
- */
-#define HAS_LDBL_DIG /**/
-
-/* HAS_LONG_DOUBLE:
- * This symbol will be defined if the C compiler supports long
- * doubles.
- */
-/* LONG_DOUBLESIZE:
- * This symbol contains the size of a long double, so that the
- * C preprocessor can make decisions based on it. It is only
- * defined if the system supports long doubles.
- */
-#define HAS_LONG_DOUBLE /**/
-#ifdef HAS_LONG_DOUBLE
-#define LONG_DOUBLESIZE 10 /**/
-#endif
-
-/* HAS_LONG_LONG:
- * This symbol will be defined if the C compiler supports long long.
- */
-/* LONGLONGSIZE:
- * This symbol contains the size of a long long, so that the
- * C preprocessor can make decisions based on it. It is only
- * defined if the system supports long long.
- */
-/*#define HAS_LONG_LONG /**/
-#ifdef HAS_LONG_LONG
-#define LONGLONGSIZE 8 /**/
-#endif
-
-/* HAS_LSEEK_PROTO:
- * This symbol, if defined, indicates that the system provides
- * a prototype for the lseek() function. Otherwise, it is up
- * to the program to supply one. A good guess is
- * extern off_t lseek(int, off_t, int);
- */
-#define HAS_LSEEK_PROTO /**/
-
-/* HAS_MADVISE:
- * This symbol, if defined, indicates that the madvise system call is
- * available to map a file into memory.
- */
-/*#define HAS_MADVISE /**/
-
-/* HAS_MEMCHR:
- * This symbol, if defined, indicates that the memchr routine is available
- * to locate characters within a C string.
- */
-#define HAS_MEMCHR /**/
-
-/* HAS_MKDTEMP:
- * This symbol, if defined, indicates that the mkdtemp routine is
- * available to exclusively create a uniquely named temporary directory.
- */
-/*#define HAS_MKDTEMP /**/
-
-/* HAS_MKSTEMP:
- * This symbol, if defined, indicates that the mkstemp routine is
- * available to exclusively create and open a uniquely named
- * temporary file.
- */
-/*#define HAS_MKSTEMP /**/
-
-/* HAS_MKSTEMPS:
- * This symbol, if defined, indicates that the mkstemps routine is
- * available to excluslvely create and open a uniquely named
- * (with a suffix) temporary file.
- */
-/*#define HAS_MKSTEMPS /**/
-
-/* HAS_MMAP:
- * This symbol, if defined, indicates that the mmap system call is
- * available to map a file into memory.
- */
-/* Mmap_t:
- * This symbol holds the return type of the mmap() system call
- * (and simultaneously the type of the first argument).
- * Usually set to 'void *' or 'cadd_t'.
- */
-/*#define HAS_MMAP /**/
-#define Mmap_t void * /**/
-
-/* HAS_MODFL:
- * This symbol, if defined, indicates that the modfl routine is
- * available to split a long double x into a fractional part f and
- * an integer part i such that |f| < 1.0 and (f + i) = x.
- */
-/*#define HAS_MODFL /**/
-
-/* HAS_MPROTECT:
- * This symbol, if defined, indicates that the mprotect system call is
- * available to modify the access protection of a memory mapped file.
- */
-/*#define HAS_MPROTECT /**/
-
-/* HAS_MSG:
- * This symbol, if defined, indicates that the entire msg*(2) library is
- * supported (IPC mechanism based on message queues).
- */
-/*#define HAS_MSG /**/
-
-/* HAS_OFF64_T:
- * This symbol will be defined if the C compiler supports off64_t.
- */
-/*#define HAS_OFF64_T /**/
-
-/* HAS_OPEN3:
- * This manifest constant lets the C program know that the three
- * argument form of open(2) is available.
- */
-/*#define HAS_OPEN3 /**/
-
-/* OLD_PTHREAD_CREATE_JOINABLE:
- * This symbol, if defined, indicates how to create pthread
- * in joinable (aka undetached) state. NOTE: not defined
- * if pthread.h already has defined PTHREAD_CREATE_JOINABLE
- * (the new version of the constant).
- * If defined, known values are PTHREAD_CREATE_UNDETACHED
- * and __UNDETACHED.
- */
-/*#define OLD_PTHREAD_CREATE_JOINABLE /**/
-
-/* HAS_PTHREAD_YIELD:
- * This symbol, if defined, indicates that the pthread_yield
- * routine is available to yield the execution of the current
- * thread. sched_yield is preferable to pthread_yield.
- */
-/* SCHED_YIELD:
- * This symbol defines the way to yield the execution of
- * the current thread. Known ways are sched_yield,
- * pthread_yield, and pthread_yield with NULL.
- */
-/* HAS_SCHED_YIELD:
- * This symbol, if defined, indicates that the sched_yield
- * routine is available to yield the execution of the current
- * thread. sched_yield is preferable to pthread_yield.
- */
-/*#define HAS_PTHREAD_YIELD /**/
-#define SCHED_YIELD /**/
-/*#define HAS_SCHED_YIELD /**/
-
-/* HAS_SAFE_BCOPY:
- * This symbol, if defined, indicates that the bcopy routine is available
- * to copy potentially overlapping memory blocks. Otherwise you should
- * probably use memmove() or memcpy(). If neither is defined, roll your
- * own version.
- */
-/*#define HAS_SAFE_BCOPY /**/
-
-/* HAS_SAFE_MEMCPY:
- * This symbol, if defined, indicates that the memcpy routine is available
- * to copy potentially overlapping memory blocks. Otherwise you should
- * probably use memmove() or memcpy(). If neither is defined, roll your
- * own version.
- */
-/*#define HAS_SAFE_MEMCPY /**/
-
-/* HAS_SANE_MEMCMP:
- * This symbol, if defined, indicates that the memcmp routine is available
- * and can be used to compare relative magnitudes of chars with their high
- * bits set. If it is not defined, roll your own version.
- */
-#define HAS_SANE_MEMCMP /**/
-
-/* HAS_SEM:
- * This symbol, if defined, indicates that the entire sem*(2) library is
- * supported.
- */
-/*#define HAS_SEM /**/
-
-/* HAS_SETGRENT:
- * This symbol, if defined, indicates that the setgrent routine is
- * available for initializing sequential access of the group database.
- */
-/*#define HAS_SETGRENT /**/
-
-/* HAS_SETGROUPS:
- * This symbol, if defined, indicates that the setgroups() routine is
- * available to set the list of process groups. If unavailable, multiple
- * groups are probably not supported.
- */
-/*#define HAS_SETGROUPS /**/
-
-/* HAS_SETHOSTENT:
- * This symbol, if defined, indicates that the sethostent() routine is
- * available.
- */
-/*#define HAS_SETHOSTENT /**/
-
-/* HAS_SETNETENT:
- * This symbol, if defined, indicates that the setnetent() routine is
- * available.
- */
-/*#define HAS_SETNETENT /**/
-
-/* HAS_SETPROTOENT:
- * This symbol, if defined, indicates that the setprotoent() routine is
- * available.
- */
-/*#define HAS_SETPROTOENT /**/
-
-/* HAS_SETPROCTITLE:
- * This symbol, if defined, indicates that the setproctitle routine is
- * available to set process title.
- */
-/*#define HAS_SETPROCTITLE /**/
-
-/* HAS_SETPWENT:
- * This symbol, if defined, indicates that the setpwent routine is
- * available for initializing sequential access of the passwd database.
- */
-/*#define HAS_SETPWENT /**/
-
-/* HAS_SETSERVENT:
- * This symbol, if defined, indicates that the setservent() routine is
- * available.
- */
-/*#define HAS_SETSERVENT /**/
-
-/* HAS_SETVBUF:
- * This symbol, if defined, indicates that the setvbuf routine is
- * available to change buffering on an open stdio stream.
- * to a line-buffered mode.
- */
-#define HAS_SETVBUF /**/
-
-/* USE_SFIO:
- * This symbol, if defined, indicates that sfio should
- * be used.
- */
-/*#define USE_SFIO /**/
-
-/* HAS_SHM:
- * This symbol, if defined, indicates that the entire shm*(2) library is
- * supported.
- */
-/*#define HAS_SHM /**/
-
-/* HAS_SIGACTION:
- * This symbol, if defined, indicates that Vr4's sigaction() routine
- * is available.
- */
-/*#define HAS_SIGACTION /**/
-
-/* HAS_SIGSETJMP:
- * This variable indicates to the C program that the sigsetjmp()
- * routine is available to save the calling process's registers
- * and stack environment for later use by siglongjmp(), and
- * to optionally save the process's signal mask. See
- * Sigjmp_buf, Sigsetjmp, and Siglongjmp.
- */
-/* Sigjmp_buf:
- * This is the buffer type to be used with Sigsetjmp and Siglongjmp.
- */
-/* Sigsetjmp:
- * This macro is used in the same way as sigsetjmp(), but will invoke
- * traditional setjmp() if sigsetjmp isn't available.
- * See HAS_SIGSETJMP.
- */
-/* Siglongjmp:
- * This macro is used in the same way as siglongjmp(), but will invoke
- * traditional longjmp() if siglongjmp isn't available.
- * See HAS_SIGSETJMP.
- */
-/*#define HAS_SIGSETJMP /**/
-#ifdef HAS_SIGSETJMP
-#define Sigjmp_buf sigjmp_buf
-#define Sigsetjmp(buf,save_mask) sigsetjmp((buf),(save_mask))
-#define Siglongjmp(buf,retval) siglongjmp((buf),(retval))
-#else
-#define Sigjmp_buf jmp_buf
-#define Sigsetjmp(buf,save_mask) setjmp((buf))
-#define Siglongjmp(buf,retval) longjmp((buf),(retval))
-#endif
-
-/* HAS_SOCKET:
- * This symbol, if defined, indicates that the BSD socket interface is
- * supported.
- */
-/* HAS_SOCKETPAIR:
- * This symbol, if defined, indicates that the BSD socketpair() call is
- * supported.
- */
-/* HAS_MSG_CTRUNC:
- * This symbol, if defined, indicates that the MSG_CTRUNC is supported.
- * Checking just with #ifdef might not be enough because this symbol
- * has been known to be an enum.
- */
-/* HAS_MSG_DONTROUTE:
- * This symbol, if defined, indicates that the MSG_DONTROUTE is supported.
- * Checking just with #ifdef might not be enough because this symbol
- * has been known to be an enum.
- */
-/* HAS_MSG_OOB:
- * This symbol, if defined, indicates that the MSG_OOB is supported.
- * Checking just with #ifdef might not be enough because this symbol
- * has been known to be an enum.
- */
-/* HAS_MSG_PEEK:
- * This symbol, if defined, indicates that the MSG_PEEK is supported.
- * Checking just with #ifdef might not be enough because this symbol
- * has been known to be an enum.
- */
-/* HAS_MSG_PROXY:
- * This symbol, if defined, indicates that the MSG_PROXY is supported.
- * Checking just with #ifdef might not be enough because this symbol
- * has been known to be an enum.
- */
-/* HAS_SCM_RIGHTS:
- * This symbol, if defined, indicates that the SCM_RIGHTS is supported.
- * Checking just with #ifdef might not be enough because this symbol
- * has been known to be an enum.
- */
-#define HAS_SOCKET /**/
-/*#define HAS_SOCKETPAIR /**/
-/*#define HAS_MSG_CTRUNC /**/
-/*#define HAS_MSG_DONTROUTE /**/
-/*#define HAS_MSG_OOB /**/
-/*#define HAS_MSG_PEEK /**/
-/*#define HAS_MSG_PROXY /**/
-/*#define HAS_SCM_RIGHTS /**/
-
-/* HAS_SOCKS5_INIT:
- * This symbol, if defined, indicates that the socks5_init routine is
- * available to initialize SOCKS 5.
- */
-/*#define HAS_SOCKS5_INIT /**/
-
-/* HAS_SQRTL:
- * This symbol, if defined, indicates that the sqrtl routine is
- * available to do long double square roots.
- */
-/*#define HAS_SQRTL /**/
-
-/* USE_STAT_BLOCKS:
- * This symbol is defined if this system has a stat structure declaring
- * st_blksize and st_blocks.
- */
-#ifndef USE_STAT_BLOCKS
-/*#define USE_STAT_BLOCKS /**/
-#endif
-
-/* HAS_STRUCT_STATFS_F_FLAGS:
- * This symbol, if defined, indicates that the struct statfs
- * does have the f_flags member containing the mount flags of
- * the filesystem containing the file.
- * This kind of struct statfs is coming from <sys/mount.h> (BSD 4.3),
- * not from <sys/statfs.h> (SYSV). Older BSDs (like Ultrix) do not
- * have statfs() and struct statfs, they have ustat() and getmnt()
- * with struct ustat and struct fs_data.
- */
-/*#define HAS_STRUCT_STATFS_F_FLAGS /**/
-
-/* HAS_STRUCT_STATFS:
- * This symbol, if defined, indicates that the struct statfs
- * to do statfs() is supported.
- */
-/*#define HAS_STRUCT_STATFS /**/
-
-/* HAS_FSTATVFS:
- * This symbol, if defined, indicates that the fstatvfs routine is
- * available to stat filesystems by file descriptors.
- */
-/*#define HAS_FSTATVFS /**/
-
-/* USE_STDIO_PTR:
- * This symbol is defined if the _ptr and _cnt fields (or similar)
- * of the stdio FILE structure can be used to access the stdio buffer
- * for a file handle. If this is defined, then the FILE_ptr(fp)
- * and FILE_cnt(fp) macros will also be defined and should be used
- * to access these fields.
- */
-/* FILE_ptr:
- * This macro is used to access the _ptr field (or equivalent) of the
- * FILE structure pointed to by its argument. This macro will always be
- * defined if USE_STDIO_PTR is defined.
- */
-/* STDIO_PTR_LVALUE:
- * This symbol is defined if the FILE_ptr macro can be used as an
- * lvalue.
- */
-/* FILE_cnt:
- * This macro is used to access the _cnt field (or equivalent) of the
- * FILE structure pointed to by its argument. This macro will always be
- * defined if USE_STDIO_PTR is defined.
- */
-/* STDIO_CNT_LVALUE:
- * This symbol is defined if the FILE_cnt macro can be used as an
- * lvalue.
- */
-/* STDIO_PTR_LVAL_SETS_CNT:
- * This symbol is defined if using the FILE_ptr macro as an lvalue
- * to increase the pointer by n has the side effect of decreasing the
- * value of File_cnt(fp) by n.
- */
-/* STDIO_PTR_LVAL_NOCHANGE_CNT:
- * This symbol is defined if using the FILE_ptr macro as an lvalue
- * to increase the pointer by n leaves File_cnt(fp) unchanged.
- */
-#define USE_STDIO_PTR /**/
-#ifdef USE_STDIO_PTR
-#define FILE_ptr(fp) ((fp)->_ptr)
-#define STDIO_PTR_LVALUE /**/
-#define FILE_cnt(fp) ((fp)->_cnt)
-#define STDIO_CNT_LVALUE /**/
-/*#define STDIO_PTR_LVAL_SETS_CNT /**/
-/*#define STDIO_PTR_LVAL_NOCHANGE_CNT /**/
-#endif
-
-/* USE_STDIO_BASE:
- * This symbol is defined if the _base field (or similar) of the
- * stdio FILE structure can be used to access the stdio buffer for
- * a file handle. If this is defined, then the FILE_base(fp) macro
- * will also be defined and should be used to access this field.
- * Also, the FILE_bufsiz(fp) macro will be defined and should be used
- * to determine the number of bytes in the buffer. USE_STDIO_BASE
- * will never be defined unless USE_STDIO_PTR is.
- */
-/* FILE_base:
- * This macro is used to access the _base field (or equivalent) of the
- * FILE structure pointed to by its argument. This macro will always be
- * defined if USE_STDIO_BASE is defined.
- */
-/* FILE_bufsiz:
- * This macro is used to determine the number of bytes in the I/O
- * buffer pointed to by _base field (or equivalent) of the FILE
- * structure pointed to its argument. This macro will always be defined
- * if USE_STDIO_BASE is defined.
- */
-#define USE_STDIO_BASE /**/
-#ifdef USE_STDIO_BASE
-#define FILE_base(fp) ((fp)->_base)
-#define FILE_bufsiz(fp) ((fp)->_cnt + (fp)->_ptr - (fp)->_base)
-#endif
-
-/* HAS_STRERROR:
- * This symbol, if defined, indicates that the strerror routine is
- * available to translate error numbers to strings. See the writeup
- * of Strerror() in this file before you try to define your own.
- */
-/* HAS_SYS_ERRLIST:
- * This symbol, if defined, indicates that the sys_errlist array is
- * available to translate error numbers to strings. The extern int
- * sys_nerr gives the size of that table.
- */
-/* Strerror:
- * This preprocessor symbol is defined as a macro if strerror() is
- * not available to translate error numbers to strings but sys_errlist[]
- * array is there.
- */
-#define HAS_STRERROR /**/
-#define HAS_SYS_ERRLIST /**/
-#define Strerror(e) strerror(e)
-
-/* HAS_STRTOLD:
- * This symbol, if defined, indicates that the strtold routine is
- * available to convert strings to long doubles.
- */
-/*#define HAS_STRTOLD /**/
-
-/* HAS_STRTOLL:
- * This symbol, if defined, indicates that the strtoll routine is
- * available to convert strings to long longs.
- */
-/*#define HAS_STRTOLL /**/
-
-/* HAS_STRTOULL:
- * This symbol, if defined, indicates that the strtoull routine is
- * available to convert strings to unsigned long longs.
- */
-/*#define HAS_STRTOULL /**/
-
-/* HAS_STRTOUQ:
- * This symbol, if defined, indicates that the strtouq routine is
- * available to convert strings to unsigned long longs (quads).
- */
-/*#define HAS_STRTOUQ /**/
-
-/* HAS_TELLDIR_PROTO:
- * This symbol, if defined, indicates that the system provides
- * a prototype for the telldir() function. Otherwise, it is up
- * to the program to supply one. A good guess is
- * extern long telldir(DIR*);
- */
-#define HAS_TELLDIR_PROTO /**/
-
-/* Time_t:
- * This symbol holds the type returned by time(). It can be long,
- * or time_t on BSD sites (in which case <sys/types.h> should be
- * included).
- */
-#define Time_t time_t /* Time type */
-
-/* HAS_TIMES:
- * This symbol, if defined, indicates that the times() routine exists.
- * Note that this became obsolete on some systems (SUNOS), which now
- * use getrusage(). It may be necessary to include <sys/times.h>.
- */
-#define HAS_TIMES /**/
-
-/* HAS_UNION_SEMUN:
- * This symbol, if defined, indicates that the union semun is
- * defined by including <sys/sem.h>. If not, the user code
- * probably needs to define it as:
- * union semun {
- * int val;
- * struct semid_ds *buf;
- * unsigned short *array;
- * }
- */
-/* USE_SEMCTL_SEMUN:
- * This symbol, if defined, indicates that union semun is
- * used for semctl IPC_STAT.
- */
-/* USE_SEMCTL_SEMID_DS:
- * This symbol, if defined, indicates that struct semid_ds * is
- * used for semctl IPC_STAT.
- */
-#define HAS_UNION_SEMUN /**/
-/*#define USE_SEMCTL_SEMUN /**/
-/*#define USE_SEMCTL_SEMID_DS /**/
-
-/* HAS_USTAT:
- * This symbol, if defined, indicates that the ustat system call is
- * available to query file system statistics by dev_t.
- */
-/*#define HAS_USTAT /**/
-
-/* HAS_VFORK:
- * This symbol, if defined, indicates that vfork() exists.
- */
-/*#define HAS_VFORK /**/
-
-/* Signal_t:
- * This symbol's value is either "void" or "int", corresponding to the
- * appropriate return type of a signal handler. Thus, you can declare
- * a signal handler using "Signal_t (*handler)()", and define the
- * handler using "Signal_t handler(sig)".
- */
-#define Signal_t void /* Signal handler's return type */
-
-/* HAS_VPRINTF:
- * This symbol, if defined, indicates that the vprintf routine is available
- * to printf with a pointer to an argument list. If unavailable, you
- * may need to write your own, probably in terms of _doprnt().
- */
-/* USE_CHAR_VSPRINTF:
- * This symbol is defined if this system has vsprintf() returning type
- * (char*). The trend seems to be to declare it as "int vsprintf()". It
- * is up to the package author to declare vsprintf correctly based on the
- * symbol.
- */
-#define HAS_VPRINTF /**/
-/*#define USE_CHAR_VSPRINTF /**/
-
-/* USE_DYNAMIC_LOADING:
- * This symbol, if defined, indicates that dynamic loading of
- * some sort is available.
- */
-#define USE_DYNAMIC_LOADING /**/
-
-/* DOUBLESIZE:
- * This symbol contains the size of a double, so that the C preprocessor
- * can make decisions based on it.
- */
-#define DOUBLESIZE 8 /**/
-
-/* EBCDIC:
- * This symbol, if defined, indicates that this system uses
- * EBCDIC encoding.
- */
-/*#define EBCDIC /**/
-
-/* FFLUSH_NULL:
- * This symbol, if defined, tells that fflush(NULL) does flush
- * all pending stdio output.
- */
-/* FFLUSH_ALL:
- * This symbol, if defined, tells that to flush
- * all pending stdio output one must loop through all
- * the stdio file handles stored in an array and fflush them.
- * Note that if fflushNULL is defined, fflushall will not
- * even be probed for and will be left undefined.
- */
-#define FFLUSH_NULL /**/
-/*#define FFLUSH_ALL /**/
-
-/* Fpos_t:
- * This symbol holds the type used to declare file positions in libc.
- * It can be fpos_t, long, uint, etc... It may be necessary to include
- * <sys/types.h> to get any typedef'ed information.
- */
-#define Fpos_t fpos_t /* File position type */
-
-/* Gid_t_f:
- * This symbol defines the format string used for printing a Gid_t.
- */
-#define Gid_t_f "ld" /**/
-
-/* Gid_t_sign:
- * This symbol holds the signedess of a Gid_t.
- * 1 for unsigned, -1 for signed.
- */
-#define Gid_t_sign -1 /* GID sign */
-
-/* Gid_t_size:
- * This symbol holds the size of a Gid_t in bytes.
- */
-#define Gid_t_size 4 /* GID size */
-
-/* Gid_t:
- * This symbol holds the return type of getgid() and the type of
- * argument to setrgid() and related functions. Typically,
- * it is the type of group ids in the kernel. It can be int, ushort,
- * gid_t, etc... It may be necessary to include <sys/types.h> to get
- * any typedef'ed information.
- */
-#define Gid_t gid_t /* Type for getgid(), etc... */
-
-/* Groups_t:
- * This symbol holds the type used for the second argument to
- * getgroups() and setgroups(). Usually, this is the same as
- * gidtype (gid_t) , but sometimes it isn't.
- * It can be int, ushort, gid_t, etc...
- * It may be necessary to include <sys/types.h> to get any
- * typedef'ed information. This is only required if you have
- * getgroups() or setgroups()..
- */
-#if defined(HAS_GETGROUPS) || defined(HAS_SETGROUPS)
-#define Groups_t gid_t /* Type for 2nd arg to [sg]etgroups() */
-#endif
-
-/* DB_Prefix_t:
- * This symbol contains the type of the prefix structure element
- * in the <db.h> header file. In older versions of DB, it was
- * int, while in newer ones it is u_int32_t.
- */
-/* DB_Hash_t:
- * This symbol contains the type of the prefix structure element
- * in the <db.h> header file. In older versions of DB, it was
- * int, while in newer ones it is size_t.
- */
-#define DB_Hash_t int /**/
-#define DB_Prefix_t int /**/
-
-/* I_GRP:
- * This symbol, if defined, indicates to the C program that it should
- * include <grp.h>.
- */
-/* GRPASSWD:
- * This symbol, if defined, indicates to the C program that struct group
- * in <grp.h> contains gr_passwd.
- */
-/*#define I_GRP /**/
-/*#define GRPASSWD /**/
-
-/* I_ICONV:
- * This symbol, if defined, indicates that <iconv.h> exists and
- * should be included.
- */
-/*#define I_ICONV /**/
-
-/* I_IEEEFP:
- * This symbol, if defined, indicates that <ieeefp.h> exists and
- * should be included.
- */
-/*#define I_IEEEFP /**/
-
-/* I_INTTYPES:
- * This symbol, if defined, indicates to the C program that it should
- * include <inttypes.h>.
- */
-/*#define I_INTTYPES /**/
-
-/* I_LIBUTIL:
- * This symbol, if defined, indicates that <libutil.h> exists and
- * should be included.
- */
-/*#define I_LIBUTIL /**/
-
-/* I_MACH_CTHREADS:
- * This symbol, if defined, indicates to the C program that it should
- * include <mach/cthreads.h>.
- */
-/*#define I_MACH_CTHREADS /**/
-
-/* I_MNTENT:
- * This symbol, if defined, indicates that <mntent.h> exists and
- * should be included.
- */
-/*#define I_MNTENT /**/
-
-/* I_NETDB:
- * This symbol, if defined, indicates that <netdb.h> exists and
- * should be included.
- */
-/*#define I_NETDB /**/
-
-/* I_NETINET_TCP:
- * This symbol, if defined, indicates to the C program that it should
- * include <netinet/tcp.h>.
- */
-/*#define I_NETINET_TCP /**/
-
-/* I_POLL:
- * This symbol, if defined, indicates that <poll.h> exists and
- * should be included.
- */
-/*#define I_POLL /**/
-
-/* I_PROT:
- * This symbol, if defined, indicates that <prot.h> exists and
- * should be included.
- */
-/*#define I_PROT /**/
-
-/* I_PTHREAD:
- * This symbol, if defined, indicates to the C program that it should
- * include <pthread.h>.
- */
-/*#define I_PTHREAD /**/
-
-/* I_PWD:
- * This symbol, if defined, indicates to the C program that it should
- * include <pwd.h>.
- */
-/* PWQUOTA:
- * This symbol, if defined, indicates to the C program that struct passwd
- * contains pw_quota.
- */
-/* PWAGE:
- * This symbol, if defined, indicates to the C program that struct passwd
- * contains pw_age.
- */
-/* PWCHANGE:
- * This symbol, if defined, indicates to the C program that struct passwd
- * contains pw_change.
- */
-/* PWCLASS:
- * This symbol, if defined, indicates to the C program that struct passwd
- * contains pw_class.
- */
-/* PWEXPIRE:
- * This symbol, if defined, indicates to the C program that struct passwd
- * contains pw_expire.
- */
-/* PWCOMMENT:
- * This symbol, if defined, indicates to the C program that struct passwd
- * contains pw_comment.
- */
-/* PWGECOS:
- * This symbol, if defined, indicates to the C program that struct passwd
- * contains pw_gecos.
- */
-/* PWPASSWD:
- * This symbol, if defined, indicates to the C program that struct passwd
- * contains pw_passwd.
- */
-/*#define I_PWD /**/
-/*#define PWQUOTA /**/
-/*#define PWAGE /**/
-/*#define PWCHANGE /**/
-/*#define PWCLASS /**/
-/*#define PWEXPIRE /**/
-/*#define PWCOMMENT /**/
-/*#define PWGECOS /**/
-/*#define PWPASSWD /**/
-
-/* I_SHADOW:
- * This symbol, if defined, indicates that <shadow.h> exists and
- * should be included.
- */
-/*#define I_SHADOW /**/
-
-/* I_SOCKS:
- * This symbol, if defined, indicates that <socks.h> exists and
- * should be included.
- */
-/*#define I_SOCKS /**/
-
-/* I_SUNMATH:
- * This symbol, if defined, indicates that <sunmath.h> exists and
- * should be included.
- */
-/*#define I_SUNMATH /**/
-
-/* I_SYSLOG:
- * This symbol, if defined, indicates that <syslog.h> exists and
- * should be included.
- */
-/*#define I_SYSLOG /**/
-
-/* I_SYSMODE:
- * This symbol, if defined, indicates that <sys/mode.h> exists and
- * should be included.
- */
-/*#define I_SYSMODE /**/
-
-/* I_SYS_MOUNT:
- * This symbol, if defined, indicates that <sys/mount.h> exists and
- * should be included.
- */
-/*#define I_SYS_MOUNT /**/
-
-/* I_SYS_STATFS:
- * This symbol, if defined, indicates that <sys/statfs.h> exists.
- */
-/*#define I_SYS_STATFS /**/
-
-/* I_SYS_STATVFS:
- * This symbol, if defined, indicates that <sys/statvfs.h> exists and
- * should be included.
- */
-/*#define I_SYS_STATVFS /**/
-
-/* I_SYSUIO:
- * This symbol, if defined, indicates that <sys/uio.h> exists and
- * should be included.
- */
-/*#define I_SYSUIO /**/
-
-/* I_SYSUTSNAME:
- * This symbol, if defined, indicates that <sys/utsname.h> exists and
- * should be included.
- */
-/*#define I_SYSUTSNAME /**/
-
-/* I_SYS_VFS:
- * This symbol, if defined, indicates that <sys/vfs.h> exists and
- * should be included.
- */
-/*#define I_SYS_VFS /**/
-
-/* I_TIME:
- * This symbol, if defined, indicates to the C program that it should
- * include <time.h>.
- */
-/* I_SYS_TIME:
- * This symbol, if defined, indicates to the C program that it should
- * include <sys/time.h>.
- */
-/* I_SYS_TIME_KERNEL:
- * This symbol, if defined, indicates to the C program that it should
- * include <sys/time.h> with KERNEL defined.
- */
-#define I_TIME /**/
-/*#define I_SYS_TIME /**/
-/*#define I_SYS_TIME_KERNEL /**/
-
-/* I_USTAT:
- * This symbol, if defined, indicates that <ustat.h> exists and
- * should be included.
- */
-/*#define I_USTAT /**/
-
-/* PERL_INC_VERSION_LIST:
- * This variable specifies the list of subdirectories in over
- * which perl.c:incpush() and lib/lib.pm will automatically
- * search when adding directories to @INC, in a format suitable
- * for a C initialization string. See the inc_version_list entry
- * in Porting/Glossary for more details.
- */
-#define PERL_INC_VERSION_LIST 0 /**/
-
-/* INSTALL_USR_BIN_PERL:
- * This symbol, if defined, indicates that Perl is to be installed
- * also as /usr/bin/perl.
- */
-/*#define INSTALL_USR_BIN_PERL /**/
-
-/* PERL_PRIfldbl:
- * This symbol, if defined, contains the string used by stdio to
- * format long doubles (format 'f') for output.
- */
-/* PERL_PRIgldbl:
- * This symbol, if defined, contains the string used by stdio to
- * format long doubles (format 'g') for output.
- */
-/* PERL_PRIeldbl:
- * This symbol, if defined, contains the string used by stdio to
- * format long doubles (format 'e') for output.
- */
-/* PERL_SCNfldbl:
- * This symbol, if defined, contains the string used by stdio to
- * format long doubles (format 'f') for input.
- */
-/*#define PERL_PRIfldbl "f" /**/
-/*#define PERL_PRIgldbl "g" /**/
-/*#define PERL_PRIeldbl "e" /**/
-/*#define PERL_SCNfldbl "f" /**/
-
-/* Off_t:
- * This symbol holds the type used to declare offsets in the kernel.
- * It can be int, long, off_t, etc... It may be necessary to include
- * <sys/types.h> to get any typedef'ed information.
- */
-/* LSEEKSIZE:
- * This symbol holds the number of bytes used by the Off_t.
- */
-/* Off_t_size:
- * This symbol holds the number of bytes used by the Off_t.
- */
-#define Off_t off_t /* <offset> type */
-#define LSEEKSIZE 4 /* <offset> size */
-#define Off_t_size 4 /* <offset> size */
-
-/* Free_t:
- * This variable contains the return type of free(). It is usually
- * void, but occasionally int.
- */
-/* Malloc_t:
- * This symbol is the type of pointer returned by malloc and realloc.
- */
-#define Malloc_t void * /**/
-#define Free_t void /**/
-
-/* MYMALLOC:
- * This symbol, if defined, indicates that we're using our own malloc.
- */
-/*#define MYMALLOC /**/
-
-/* Mode_t:
- * This symbol holds the type used to declare file modes
- * for systems calls. It is usually mode_t, but may be
- * int or unsigned short. It may be necessary to include <sys/types.h>
- * to get any typedef'ed information.
- */
-#define Mode_t mode_t /* file mode parameter for system calls */
-
-/* VAL_O_NONBLOCK:
- * This symbol is to be used during open() or fcntl(F_SETFL) to turn on
- * non-blocking I/O for the file descriptor. Note that there is no way
- * back, i.e. you cannot turn it blocking again this way. If you wish to
- * alternatively switch between blocking and non-blocking, use the
- * ioctl(FIOSNBIO) call instead, but that is not supported by all devices.
- */
-/* VAL_EAGAIN:
- * This symbol holds the errno error code set by read() when no data was
- * present on the non-blocking file descriptor.
- */
-/* RD_NODATA:
- * This symbol holds the return code from read() when no data is present
- * on the non-blocking file descriptor. Be careful! If EOF_NONBLOCK is
- * not defined, then you can't distinguish between no data and EOF by
- * issuing a read(). You'll have to find another way to tell for sure!
- */
-/* EOF_NONBLOCK:
- * This symbol, if defined, indicates to the C program that a read() on
- * a non-blocking file descriptor will return 0 on EOF, and not the value
- * held in RD_NODATA (-1 usually, in that case!).
- */
-#define VAL_O_NONBLOCK O_NONBLOCK
-#define VAL_EAGAIN EAGAIN
-#define RD_NODATA -1
-#define EOF_NONBLOCK
-
-/* Netdb_host_t:
- * This symbol holds the type used for the 1st argument
- * to gethostbyaddr().
- */
-/* Netdb_hlen_t:
- * This symbol holds the type used for the 2nd argument
- * to gethostbyaddr().
- */
-/* Netdb_name_t:
- * This symbol holds the type used for the argument to
- * gethostbyname().
- */
-/* Netdb_net_t:
- * This symbol holds the type used for the 1st argument to
- * getnetbyaddr().
- */
-#define Netdb_host_t char * /**/
-#define Netdb_hlen_t int /**/
-#define Netdb_name_t char * /**/
-#define Netdb_net_t long /**/
-
-/* PERL_OTHERLIBDIRS:
- * This variable contains a colon-separated set of paths for the perl
- * binary to search for additional library files or modules.
- * These directories will be tacked to the end of @INC.
- * Perl will automatically search below each path for version-
- * and architecture-specific directories. See PERL_INC_VERSION_LIST
- * for more details.
- */
-/*#define PERL_OTHERLIBDIRS "" /**/
-
-/* IVTYPE:
- * This symbol defines the C type used for Perl's IV.
- */
-/* UVTYPE:
- * This symbol defines the C type used for Perl's UV.
- */
-/* I8TYPE:
- * This symbol defines the C type used for Perl's I8.
- */
-/* U8TYPE:
- * This symbol defines the C type used for Perl's U8.
- */
-/* I16TYPE:
- * This symbol defines the C type used for Perl's I16.
- */
-/* U16TYPE:
- * This symbol defines the C type used for Perl's U16.
- */
-/* I32TYPE:
- * This symbol defines the C type used for Perl's I32.
- */
-/* U32TYPE:
- * This symbol defines the C type used for Perl's U32.
- */
-/* I64TYPE:
- * This symbol defines the C type used for Perl's I64.
- */
-/* U64TYPE:
- * This symbol defines the C type used for Perl's U64.
- */
-/* NVTYPE:
- * This symbol defines the C type used for Perl's NV.
- */
-/* IVSIZE:
- * This symbol contains the sizeof(IV).
- */
-/* UVSIZE:
- * This symbol contains the sizeof(UV).
- */
-/* I8SIZE:
- * This symbol contains the sizeof(I8).
- */
-/* U8SIZE:
- * This symbol contains the sizeof(U8).
- */
-/* I16SIZE:
- * This symbol contains the sizeof(I16).
- */
-/* U16SIZE:
- * This symbol contains the sizeof(U16).
- */
-/* I32SIZE:
- * This symbol contains the sizeof(I32).
- */
-/* U32SIZE:
- * This symbol contains the sizeof(U32).
- */
-/* I64SIZE:
- * This symbol contains the sizeof(I64).
- */
-/* U64SIZE:
- * This symbol contains the sizeof(U64).
- */
-/* NVSIZE:
- * This symbol contains the sizeof(NV).
- */
-/* NV_PRESERVES_UV:
- * This symbol, if defined, indicates that a variable of type NVTYPE
- * can preserve all the bits of a variable of type UVTYPE.
- */
-/* NV_PRESERVES_UV_BITS:
- * This symbol contains the number of bits a variable of type NVTYPE
- * can preserve of a variable of type UVTYPE.
- */
-#define IVTYPE __int64 /**/
-#define UVTYPE unsigned __int64 /**/
-#define I8TYPE char /**/
-#define U8TYPE unsigned char /**/
-#define I16TYPE short /**/
-#define U16TYPE unsigned short /**/
-#define I32TYPE long /**/
-#define U32TYPE unsigned long /**/
-#ifdef HAS_QUAD
-#define I64TYPE __int64 /**/
-#define U64TYPE unsigned __int64 /**/
-#endif
-#define NVTYPE double /**/
-#define IVSIZE 8 /**/
-#define UVSIZE 8 /**/
-#define I8SIZE 1 /**/
-#define U8SIZE 1 /**/
-#define I16SIZE 2 /**/
-#define U16SIZE 2 /**/
-#define I32SIZE 4 /**/
-#define U32SIZE 4 /**/
-#ifdef HAS_QUAD
-#define I64SIZE 8 /**/
-#define U64SIZE 8 /**/
-#endif
-#define NVSIZE 8 /**/
-#define NV_PRESERVES_UV
-#define NV_PRESERVES_UV_BITS 64
-
-/* IVdf:
- * This symbol defines the format string used for printing a Perl IV
- * as a signed decimal integer.
- */
-/* UVuf:
- * This symbol defines the format string used for printing a Perl UV
- * as an unsigned decimal integer.
- */
-/* UVof:
- * This symbol defines the format string used for printing a Perl UV
- * as an unsigned octal integer.
- */
-/* UVxf:
- * This symbol defines the format string used for printing a Perl UV
- * as an unsigned hexadecimal integer in lowercase abcdef.
- */
-/* NVef:
- * This symbol defines the format string used for printing a Perl NV
- * using %e-ish floating point format.
- */
-/* NVff:
- * This symbol defines the format string used for printing a Perl NV
- * using %f-ish floating point format.
- */
-/* NVgf:
- * This symbol defines the format string used for printing a Perl NV
- * using %g-ish floating point format.
- */
-#define IVdf "ld" /**/
-#define UVuf "lu" /**/
-#define UVof "lo" /**/
-#define UVxf "lx" /**/
-#define NVef "e" /**/
-#define NVff "f" /**/
-#define NVgf "g" /**/
-
-/* Pid_t:
- * This symbol holds the type used to declare process ids in the kernel.
- * It can be int, uint, pid_t, etc... It may be necessary to include
- * <sys/types.h> to get any typedef'ed information.
- */
-#define Pid_t int /* PID type */
-
-/* PRIVLIB:
- * This symbol contains the name of the private library for this package.
- * The library is private in the sense that it needn't be in anyone's
- * execution path, but it should be accessible by the world. The program
- * should be prepared to do ~ expansion.
- */
-/* PRIVLIB_EXP:
- * This symbol contains the ~name expanded version of PRIVLIB, to be used
- * in programs that are not prepared to deal with ~ expansion at run-time.
- */
-#define PRIVLIB "c:\\perl64\\5.6.1\\lib" /**/
-#define PRIVLIB_EXP (win32_get_privlib("5.6.1")) /**/
-
-/* PTRSIZE:
- * This symbol contains the size of a pointer, so that the C preprocessor
- * can make decisions based on it. It will be sizeof(void *) if
- * the compiler supports (void *); otherwise it will be
- * sizeof(char *).
- */
-#define PTRSIZE 8 /**/
-
-/* Drand01:
- * This macro is to be used to generate uniformly distributed
- * random numbers over the range [0., 1.[. You may have to supply
- * an 'extern double drand48();' in your program since SunOS 4.1.3
- * doesn't provide you with anything relevant in it's headers.
- * See HAS_DRAND48_PROTO.
- */
-/* Rand_seed_t:
- * This symbol defines the type of the argument of the
- * random seed function.
- */
-/* seedDrand01:
- * This symbol defines the macro to be used in seeding the
- * random number generator (see Drand01).
- */
-/* RANDBITS:
- * This symbol indicates how many bits are produced by the
- * function used to generate normalized random numbers.
- * Values include 15, 16, 31, and 48.
- */
-#define Drand01() (rand()/(double)((unsigned)1<<RANDBITS)) /**/
-#define Rand_seed_t unsigned /**/
-#define seedDrand01(x) srand((Rand_seed_t)x) /**/
-#define RANDBITS 15 /**/
-
-/* SELECT_MIN_BITS:
- * This symbol holds the minimum number of bits operated by select.
- * That is, if you do select(n, ...), how many bits at least will be
- * cleared in the masks if some activity is detected. Usually this
- * is either n or 32*ceil(n/32), especially many little-endians do
- * the latter. This is only useful if you have select(), naturally.
- */
-#define SELECT_MIN_BITS 32 /**/
-
-/* Select_fd_set_t:
- * This symbol holds the type used for the 2nd, 3rd, and 4th
- * arguments to select. Usually, this is 'fd_set *', if HAS_FD_SET
- * is defined, and 'int *' otherwise. This is only useful if you
- * have select(), of course.
- */
-#define Select_fd_set_t Perl_fd_set * /**/
-
-/* SIG_NAME:
- * This symbol contains a list of signal names in order of
- * signal number. This is intended
- * to be used as a static array initialization, like this:
- * char *sig_name[] = { SIG_NAME };
- * The signals in the list are separated with commas, and each signal
- * is surrounded by double quotes. There is no leading SIG in the signal
- * name, i.e. SIGQUIT is known as "QUIT".
- * Gaps in the signal numbers (up to NSIG) are filled in with NUMnn,
- * etc., where nn is the actual signal number (e.g. NUM37).
- * The signal number for sig_name[i] is stored in sig_num[i].
- * The last element is 0 to terminate the list with a NULL. This
- * corresponds to the 0 at the end of the sig_num list.
- */
-/* SIG_NUM:
- * This symbol contains a list of signal numbers, in the same order as the
- * SIG_NAME list. It is suitable for static array initialization, as in:
- * int sig_num[] = { SIG_NUM };
- * The signals in the list are separated with commas, and the indices
- * within that list and the SIG_NAME list match, so it's easy to compute
- * the signal name from a number or vice versa at the price of a small
- * dynamic linear lookup.
- * Duplicates are allowed, but are moved to the end of the list.
- * The signal number corresponding to sig_name[i] is sig_number[i].
- * if (i < NSIG) then sig_number[i] == i.
- * The last element is 0, corresponding to the 0 at the end of
- * the sig_name list.
- */
-#define SIG_NAME "ZERO", "NUM01", "INT", "QUIT", "ILL", "NUM05", "NUM06", "NUM07", "FPE", "KILL", "NUM10", "SEGV", "NUM12", "PIPE", "ALRM", "TERM", "NUM16", "NUM17", "NUM18", "NUM19", "CHLD", "BREAK", "ABRT", "STOP", "NUM24", "CONT", "CLD", 0 /**/
-#define SIG_NUM 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 20, 0 /**/
-
-/* SITEARCH:
- * This symbol contains the name of the private library for this package.
- * The library is private in the sense that it needn't be in anyone's
- * execution path, but it should be accessible by the world. The program
- * should be prepared to do ~ expansion.
- * The standard distribution will put nothing in this directory.
- * After perl has been installed, users may install their own local
- * architecture-dependent modules in this directory with
- * MakeMaker Makefile.PL
- * or equivalent. See INSTALL for details.
- */
-/* SITEARCH_EXP:
- * This symbol contains the ~name expanded version of SITEARCH, to be used
- * in programs that are not prepared to deal with ~ expansion at run-time.
- */
-#define SITEARCH "c:\\perl64\\site\\5.6.1\\lib\\MSWin32-IA64" /**/
-/*#define SITEARCH_EXP "" /**/
-
-/* SITELIB:
- * This symbol contains the name of the private library for this package.
- * The library is private in the sense that it needn't be in anyone's
- * execution path, but it should be accessible by the world. The program
- * should be prepared to do ~ expansion.
- * The standard distribution will put nothing in this directory.
- * After perl has been installed, users may install their own local
- * architecture-independent modules in this directory with
- * MakeMaker Makefile.PL
- * or equivalent. See INSTALL for details.
- */
-/* SITELIB_EXP:
- * This symbol contains the ~name expanded version of SITELIB, to be used
- * in programs that are not prepared to deal with ~ expansion at run-time.
- */
-/* SITELIB_STEM:
- * This define is SITELIB_EXP with any trailing version-specific component
- * removed. The elements in inc_version_list (inc_version_list.U) can
- * be tacked onto this variable to generate a list of directories to search.
- */
-#define SITELIB "c:\\perl64\\site\\5.6.1\\lib" /**/
-#define SITELIB_EXP (win32_get_sitelib("5.6.1")) /**/
-#define SITELIB_STEM "" /**/
-
-/* Size_t_size:
- * This symbol holds the size of a Size_t in bytes.
- */
-#define Size_t_size 8 /**/
-
-/* Size_t:
- * This symbol holds the type used to declare length parameters
- * for string functions. It is usually size_t, but may be
- * unsigned long, int, etc. It may be necessary to include
- * <sys/types.h> to get any typedef'ed information.
- */
-#define Size_t size_t /* length paramater for string functions */
-
-/* Sock_size_t:
- * This symbol holds the type used for the size argument of
- * various socket calls (just the base type, not the pointer-to).
- */
-#define Sock_size_t int /**/
-
-/* SSize_t:
- * This symbol holds the type used by functions that return
- * a count of bytes or an error condition. It must be a signed type.
- * It is usually ssize_t, but may be long or int, etc.
- * It may be necessary to include <sys/types.h> or <unistd.h>
- * to get any typedef'ed information.
- * We will pick a type such that sizeof(SSize_t) == sizeof(Size_t).
- */
-#define SSize_t __int64 /* signed count of bytes */
-
-/* STARTPERL:
- * This variable contains the string to put in front of a perl
- * script to make sure (one hopes) that it runs with perl and not
- * some shell.
- */
-#define STARTPERL "#!perl" /**/
-
-/* HAS_STDIO_STREAM_ARRAY:
- * This symbol, if defined, tells that there is an array
- * holding the stdio streams.
- */
-/* STDIO_STREAM_ARRAY:
- * This symbol tells the name of the array holding the stdio streams.
- * Usual values include _iob, __iob, and __sF.
- */
-/*#define HAS_STDIO_STREAM_ARRAY /**/
-#define STDIO_STREAM_ARRAY
-
-/* Uid_t_f:
- * This symbol defines the format string used for printing a Uid_t.
- */
-#define Uid_t_f "ld" /**/
-
-/* Uid_t_sign:
- * This symbol holds the signedess of a Uid_t.
- * 1 for unsigned, -1 for signed.
- */
-#define Uid_t_sign -1 /* UID sign */
-
-/* Uid_t_size:
- * This symbol holds the size of a Uid_t in bytes.
- */
-#define Uid_t_size 4 /* UID size */
-
-/* Uid_t:
- * This symbol holds the type used to declare user ids in the kernel.
- * It can be int, ushort, uid_t, etc... It may be necessary to include
- * <sys/types.h> to get any typedef'ed information.
- */
-#define Uid_t uid_t /* UID type */
-
-/* USE_64_BIT_INT:
- * This symbol, if defined, indicates that 64-bit integers should
- * be used when available. If not defined, the native integers
- * will be employed (be they 32 or 64 bits). The minimal possible
- * 64-bitness is used, just enough to get 64-bit integers into Perl.
- * This may mean using for example "long longs", while your memory
- * may still be limited to 2 gigabytes.
- */
-/* USE_64_BIT_ALL:
- * This symbol, if defined, indicates that 64-bit integers should
- * be used when available. If not defined, the native integers
- * will be used (be they 32 or 64 bits). The maximal possible
- * 64-bitness is employed: LP64 or ILP64, meaning that you will
- * be able to use more than 2 gigabytes of memory. This mode is
- * even more binary incompatible than USE_64_BIT_INT. You may not
- * be able to run the resulting executable in a 32-bit CPU at all or
- * you may need at least to reboot your OS to 64-bit mode.
- */
-#ifndef USE_64_BIT_INT
-#define USE_64_BIT_INT /**/
-#endif
-
-#ifndef USE_64_BIT_ALL
-/*#define USE_64_BIT_ALL /**/
-#endif
-
-/* USE_LARGE_FILES:
- * This symbol, if defined, indicates that large file support
- * should be used when available.
- */
-#ifndef USE_LARGE_FILES
-/*#define USE_LARGE_FILES /**/
-#endif
-
-/* USE_LONG_DOUBLE:
- * This symbol, if defined, indicates that long doubles should
- * be used when available.
- */
-#ifndef USE_LONG_DOUBLE
-/*#define USE_LONG_DOUBLE /**/
-#endif
-
-/* USE_MORE_BITS:
- * This symbol, if defined, indicates that 64-bit interfaces and
- * long doubles should be used when available.
- */
-#ifndef USE_MORE_BITS
-/*#define USE_MORE_BITS /**/
-#endif
-
-/* MULTIPLICITY:
- * This symbol, if defined, indicates that Perl should
- * be built to use multiplicity.
- */
-#ifndef MULTIPLICITY
-/*#define MULTIPLICITY /**/
-#endif
-
-/* USE_PERLIO:
- * This symbol, if defined, indicates that the PerlIO abstraction should
- * be used throughout. If not defined, stdio should be
- * used in a fully backward compatible manner.
- */
-#ifndef USE_PERLIO
-/*#define USE_PERLIO /**/
-#endif
-
-/* USE_SOCKS:
- * This symbol, if defined, indicates that Perl should
- * be built to use socks.
- */
-#ifndef USE_SOCKS
-/*#define USE_SOCKS /**/
-#endif
-
-/* USE_ITHREADS:
- * This symbol, if defined, indicates that Perl should be built to
- * use the interpreter-based threading implementation.
- */
-/* USE_5005THREADS:
- * This symbol, if defined, indicates that Perl should be built to
- * use the 5.005-based threading implementation.
- */
-/* OLD_PTHREADS_API:
- * This symbol, if defined, indicates that Perl should
- * be built to use the old draft POSIX threads API.
- */
-/*#define USE_5005THREADS /**/
-/*#define USE_ITHREADS /**/
-#if defined(USE_5005THREADS) && !defined(USE_ITHREADS)
-#define USE_THREADS /* until src is revised*/
-#endif
-/*#define OLD_PTHREADS_API /**/
-
-/* PERL_VENDORARCH:
- * If defined, this symbol contains the name of a private library.
- * The library is private in the sense that it needn't be in anyone's
- * execution path, but it should be accessible by the world.
- * It may have a ~ on the front.
- * The standard distribution will put nothing in this directory.
- * Vendors who distribute perl may wish to place their own
- * architecture-dependent modules and extensions in this directory with
- * MakeMaker Makefile.PL INSTALLDIRS=vendor
- * or equivalent. See INSTALL for details.
- */
-/* PERL_VENDORARCH_EXP:
- * This symbol contains the ~name expanded version of PERL_VENDORARCH, to be used
- * in programs that are not prepared to deal with ~ expansion at run-time.
- */
-/*#define PERL_VENDORARCH "" /**/
-/*#define PERL_VENDORARCH_EXP "" /**/
-
-/* PERL_VENDORLIB_EXP:
- * This symbol contains the ~name expanded version of VENDORLIB, to be used
- * in programs that are not prepared to deal with ~ expansion at run-time.
- */
-/* PERL_VENDORLIB_STEM:
- * This define is PERL_VENDORLIB_EXP with any trailing version-specific component
- * removed. The elements in inc_version_list (inc_version_list.U) can
- * be tacked onto this variable to generate a list of directories to search.
- */
-/*#define PERL_VENDORLIB_EXP "" /**/
-/*#define PERL_VENDORLIB_STEM "" /**/
-
-/* VOIDFLAGS:
- * This symbol indicates how much support of the void type is given by this
- * compiler. What various bits mean:
- *
- * 1 = supports declaration of void
- * 2 = supports arrays of pointers to functions returning void
- * 4 = supports comparisons between pointers to void functions and
- * addresses of void functions
- * 8 = suports declaration of generic void pointers
- *
- * The package designer should define VOIDUSED to indicate the requirements
- * of the package. This can be done either by #defining VOIDUSED before
- * including config.h, or by defining defvoidused in Myinit.U. If the
- * latter approach is taken, only those flags will be tested. If the
- * level of void support necessary is not present, defines void to int.
- */
-#ifndef VOIDUSED
-#define VOIDUSED 15
-#endif
-#define VOIDFLAGS 15
-#if (VOIDFLAGS & VOIDUSED) != VOIDUSED
-#define void int /* is void to be avoided? */
-#define M_VOID /* Xenix strikes again */
-#endif
-
-/* PERL_XS_APIVERSION:
- * This variable contains the version of the oldest perl binary
- * compatible with the present perl. perl.c:incpush() and
- * lib/lib.pm will automatically search in c:\\perl64\\site\\5.6.1\\lib\\MSWin32-IA64 for older
- * directories across major versions back to xs_apiversion.
- * This is only useful if you have a perl library directory tree
- * structured like the default one.
- * See INSTALL for how this works.
- * The versioned site_perl directory was introduced in 5.005,
- * so that is the lowest possible value.
- * Since this can depend on compile time options (such as
- * bincompat) it is set by Configure. Other non-default sources
- * of potential incompatibility, such as multiplicity, threads,
- * debugging, 64bits, sfio, etc., are not checked for currently,
- * though in principle we could go snooping around in old
- * Config.pm files.
- */
-/* PERL_PM_APIVERSION:
- * This variable contains the version of the oldest perl
- * compatible with the present perl. (That is, pure perl modules
- * written for pm_apiversion will still work for the current
- * version). perl.c:incpush() and lib/lib.pm will automatically
- * search in c:\\perl64\\site\\5.6.1\\lib for older directories across major versions
- * back to pm_apiversion. This is only useful if you have a perl
- * library directory tree structured like the default one. The
- * versioned site_perl library was introduced in 5.005, so that's
- * the default setting for this variable. It's hard to imagine
- * it changing before Perl6. It is included here for symmetry
- * with xs_apiveprsion -- the searching algorithms will
- * (presumably) be similar.
- * See the INSTALL file for how this works.
- */
-#define PERL_XS_APIVERSION "5.6.0"
-#define PERL_PM_APIVERSION "5.005"
-
-/* HAS_GETPGRP:
- * This symbol, if defined, indicates that the getpgrp routine is
- * available to get the current process group.
- */
-/* USE_BSD_GETPGRP:
- * This symbol, if defined, indicates that getpgrp needs one
- * arguments whereas USG one needs none.
- */
-/*#define HAS_GETPGRP /**/
-/*#define USE_BSD_GETPGRP /**/
-
-/* HAS_SETPGRP:
- * This symbol, if defined, indicates that the setpgrp routine is
- * available to set the current process group.
- */
-/* USE_BSD_SETPGRP:
- * This symbol, if defined, indicates that setpgrp needs two
- * arguments whereas USG one needs none. See also HAS_SETPGID
- * for a POSIX interface.
- */
-/*#define HAS_SETPGRP /**/
-/*#define USE_BSD_SETPGRP /**/
-
-/* STDCHAR:
- * This symbol is defined to be the type of char used in stdio.h.
- * It has the values "unsigned char" or "char".
- */
-#define STDCHAR char /**/
-
-/* HAS__FWALK:
- * This symbol, if defined, indicates that the _fwalk system call is
- * available to apply a function to all the file handles.
- */
-/*#define HAS__FWALK /**/
-
-/* FCNTL_CAN_LOCK:
- * This symbol, if defined, indicates that fcntl() can be used
- * for file locking. Normally on Unix systems this is defined.
- * It may be undefined on VMS.
- */
-/*#define FCNTL_CAN_LOCK /**/
-
-/* HAS_FSYNC:
- * This symbol, if defined, indicates that the fsync routine is
- * available to write a file's modified data and attributes to
- * permanent storage.
- */
-/*#define HAS_FSYNC /**/
-
-/* HAS_SBRK_PROTO:
- * This symbol, if defined, indicates that the system provides
- * a prototype for the sbrk() function. Otherwise, it is up
- * to the program to supply one. Good guesses are
- * extern void* sbrk(int);
- * extern void* sbrk(size_t);
- */
-/*#define HAS_SBRK_PROTO /**/
-
-#endif
projects / p5sagit/p5-mst-13.2.git / commitdiff