Regen Configure.

p4raw-id: //depot/cfgperl@6006

diff --git a/Configure b/Configure
index a271f8c..83a685d 100755 (executable)
--- a/Configure
+++ b/Configure
@@ -20,7 +20,7 @@
 
 # $Id: Head.U,v 3.0.1.9 1997/02/28 15:02:09 ram Exp $
 #
-# Generated on Mon Apr 24 23:59:43 EET DST 2000 [metaconfig 3.0 PL70]
+# Generated on Fri Apr 28 23:33:15 EET DST 2000 [metaconfig 3.0 PL70]
 # (with additional metaconfig patches by perlbug@perl.com)
 
 cat >/tmp/c1$$ <<EOF
@@ -5254,6 +5254,108 @@ echo "Your system uses $freetype free(), it would seem." >&4
 $rm -f malloc.[co]
 $cat <<EOM
 
+After $package is installed, you may wish to install various
+add-on modules and utilities.  Typically, these add-ons will
+be installed under $prefix with the rest
+of this package.  However, you may wish to install such add-ons
+elsewhere under a different prefix.
+
+If you do not wish to put everything under a single prefix, that's
+ok.  You will be prompted for the individual locations; this siteprefix
+is only used to suggest the defaults.
+
+The default should be fine for most people.
+
+EOM
+fn=d~+
+rp='Installation prefix to use for add-on modules and utilities?'
+: XXX Here might be another good place for an installstyle setting.
+case "$siteprefix" in
+'') dflt=$prefix ;;
+*)  dflt=$siteprefix ;;
+esac
+. ./getfile
+: XXX Prefixit unit does not yet support siteprefix and vendorprefix
+oldsiteprefix=''
+case "$siteprefix" in
+'') ;;
+*)     case "$ans" in
+       "$prefix") ;;
+       *) oldsiteprefix="$prefix";;
+       esac
+       ;;
+esac
+siteprefix="$ans"
+siteprefixexp="$ansexp"
+
+: determine where site specific libraries go.
+: Usual default is /usr/local/lib/perl5/site_perl/$version
+: The default "style" setting is made in installstyle.U
+: XXX No longer works with Prefixit stuff.
+prog=`echo $package | $sed 's/-*[0-9.]*$//'`
+case "$sitelib" in
+'') case "$installstyle" in
+       *lib/perl5*) dflt=$siteprefix/lib/$package/site_$prog/$version ;;
+       *)       dflt=$siteprefix/lib/site_$prog/$version ;;
+       esac
+       ;;
+*)     dflt="$sitelib"
+       ;;
+esac
+$cat <<EOM
+
+The installation process will create a directory for
+site-specific extensions and modules.  Most users find it convenient
+to place all site-specific files in this directory rather than in the
+main distribution directory.
+
+EOM
+fn=d~+
+rp='Pathname for the site-specific library files?'
+. ./getfile
+sitelib="$ans"
+sitelibexp="$ansexp"
+sitelib_stem=`echo "$sitelibexp" | sed "s,/$version$,,"`
+: Change installation prefix, if necessary.
+if $test X"$prefix" != X"$installprefix"; then
+       installsitelib=`echo $sitelibexp | $sed "s#^$prefix#$installprefix#"`
+else
+       installsitelib="$sitelibexp"
+fi
+
+: determine where site specific architecture-dependent libraries go.
+: sitelib  default is /usr/local/lib/perl5/site_perl/$version
+: sitearch default is /usr/local/lib/perl5/site_perl/$version/$archname
+: sitelib may have an optional trailing /share.
+case "$sitearch" in
+'')    dflt=`echo $sitelib | $sed 's,/share$,,'`
+       dflt="$dflt/$archname"
+       ;;
+*)     dflt="$sitearch"
+       ;;
+esac
+set sitearch sitearch none
+eval $prefixit
+$cat <<EOM
+
+The installation process will also create a directory for
+architecture-dependent site-specific extensions and modules.
+
+EOM
+fn=d~+
+rp='Pathname for the site-specific architecture-dependent library files?'
+. ./getfile
+sitearch="$ans"
+sitearchexp="$ansexp"
+: Change installation prefix, if necessary.
+if $test X"$prefix" != X"$installprefix"; then
+       installsitearch=`echo $sitearchexp | sed "s#^$prefix#$installprefix#"`
+else
+       installsitearch="$sitearchexp"
+fi
+
+$cat <<EOM
+
 The installation process will also create a directory for
 vendor-supplied add-ons.  Vendors who supply perl with their system
 may find it convenient to place all vendor-supplied files in this
@@ -5490,77 +5592,6 @@ case "$perl5" in
 *)     echo "Using $perl5." ;;
 esac
 
-$cat <<EOM
-
-After $package is installed, you may wish to install various
-add-on modules and utilities.  Typically, these add-ons will
-be installed under $prefix with the rest
-of this package.  However, you may wish to install such add-ons
-elsewhere under a different prefix.
-
-If you do not wish to put everything under a single prefix, that's
-ok.  You will be prompted for the individual locations; this siteprefix
-is only used to suggest the defaults.
-
-The default should be fine for most people.
-
-EOM
-fn=d~+
-rp='Installation prefix to use for add-on modules and utilities?'
-: XXX Here might be another good place for an installstyle setting.
-case "$siteprefix" in
-'') dflt=$prefix ;;
-*)  dflt=$siteprefix ;;
-esac
-. ./getfile
-: XXX Prefixit unit does not yet support siteprefix and vendorprefix
-oldsiteprefix=''
-case "$siteprefix" in
-'') ;;
-*)     case "$ans" in
-       "$prefix") ;;
-       *) oldsiteprefix="$prefix";;
-       esac
-       ;;
-esac
-siteprefix="$ans"
-siteprefixexp="$ansexp"
-
-: determine where site specific libraries go.
-: Usual default is /usr/local/lib/perl5/site_perl/$version
-: The default "style" setting is made in installstyle.U
-: XXX No longer works with Prefixit stuff.
-prog=`echo $package | $sed 's/-*[0-9.]*$//'`
-case "$sitelib" in
-'') case "$installstyle" in
-       *lib/perl5*) dflt=$siteprefix/lib/$package/site_$prog/$version ;;
-       *)       dflt=$siteprefix/lib/site_$prog/$version ;;
-       esac
-       ;;
-*)     dflt="$sitelib"
-       ;;
-esac
-$cat <<EOM
-
-The installation process will create a directory for
-site-specific extensions and modules.  Most users find it convenient
-to place all site-specific files in this directory rather than in the
-main distribution directory.
-
-EOM
-fn=d~+
-rp='Pathname for the site-specific library files?'
-. ./getfile
-sitelib="$ans"
-sitelibexp="$ansexp"
-sitelib_stem=`echo "$sitelibexp" | sed "s,/$version$,,"`
-: Change installation prefix, if necessary.
-if $test X"$prefix" != X"$installprefix"; then
-       installsitelib=`echo $sitelibexp | $sed "s#^$prefix#$installprefix#"`
-else
-       installsitelib="$sitelibexp"
-fi
-
 : Determine list of previous versions to include in @INC
 $cat > getverlist <<EOPL
 #!$perl5 -w
@@ -7190,37 +7221,6 @@ else
        installscript="$scriptdirexp"
 fi
 
-: determine where site specific architecture-dependent libraries go.
-: sitelib  default is /usr/local/lib/perl5/site_perl/$version
-: sitearch default is /usr/local/lib/perl5/site_perl/$version/$archname
-: sitelib may have an optional trailing /share.
-case "$sitearch" in
-'')    dflt=`echo $sitelib | $sed 's,/share$,,'`
-       dflt="$dflt/$archname"
-       ;;
-*)     dflt="$sitearch"
-       ;;
-esac
-set sitearch sitearch none
-eval $prefixit
-$cat <<EOM
-
-The installation process will also create a directory for
-architecture-dependent site-specific extensions and modules.
-
-EOM
-fn=d~+
-rp='Pathname for the site-specific architecture-dependent library files?'
-. ./getfile
-sitearch="$ans"
-sitearchexp="$ansexp"
-: Change installation prefix, if necessary.
-if $test X"$prefix" != X"$installprefix"; then
-       installsitearch=`echo $sitearchexp | sed "s#^$prefix#$installprefix#"`
-else
-       installsitearch="$sitearchexp"
-fi
-
 : determine where add-on public executables go
 case "$sitebin" in
 '')    dflt=$siteprefix/bin ;;

diff --git a/Porting/config.sh b/Porting/config.sh
index 15d7893..ec7b131 100644 (file)
--- a/Porting/config.sh
+++ b/Porting/config.sh
@@ -8,7 +8,7 @@
 
 # Package name      : perl5
 # Source directory  : .
-# Configuration time: Tue Apr 25 00:14:34 EET DST 2000
+# Configuration time: Fri Apr 28 23:34:47 EET DST 2000
 # Configured by     : jhi
 # Target system     : osf1 alpha.hut.fi v4.0 878 alpha 
 
@@ -59,7 +59,7 @@ ccflags='-pthread -std -DLANGUAGE_C'
 ccsymbols='__alpha=1 __LANGUAGE_C__=1 __osf__=1 __unix__=1 _LONGLONG=1 _SYSTYPE_BSD=1 SYSTYPE_BSD=1 unix=1'
 cf_by='jhi'
 cf_email='yourname@yourhost.yourplace.com'
-cf_time='Tue Apr 25 00:14:34 EET DST 2000'
+cf_time='Fri Apr 28 23:34:47 EET DST 2000'
 charsize='1'
 chgrp=''
 chmod=''

diff --git a/Porting/config_H b/Porting/config_H
index 8657341..46184ef 100644 (file)
--- a/Porting/config_H
+++ b/Porting/config_H
@@ -17,7 +17,7 @@
 /*
  * Package name      : perl5
  * Source directory  : .
- * Configuration time: Tue Apr 25 00:14:34 EET DST 2000
+ * Configuration time: Fri Apr 28 23:34:47 EET DST 2000
  * Configured by     : jhi
  * Target system     : osf1 alpha.hut.fi v4.0 878 alpha 
  */
@@ -2495,16 +2495,6 @@
  */
 #define INSTALL_USR_BIN_PERL   /**/
 
-/* PERL_OTHERLIBDIRS:
- *     This variable contains a colon-separated set of paths for the perl
- *     binary to search for additional library files or modules.
- *     These directories will be tacked to the end of @INC.
- *     Perl will automatically search below each path for version-
- *     and architecture-specific directories.  See PERL_INC_VERSION_LIST
- *     for more details.
- */
-/*#define PERL_OTHERLIBDIRS " "                / **/
-
 /* PERL_PRIfldbl:
  *     This symbol, if defined, contains the string used by stdio to
  *     format long doubles (format 'f') for output.
@@ -2602,6 +2592,16 @@
 #define Netdb_name_t           const char * /**/
 #define Netdb_net_t            int /**/
 
+/* PERL_OTHERLIBDIRS:
+ *     This variable contains a colon-separated set of paths for the perl
+ *     binary to search for additional library files or modules.
+ *     These directories will be tacked to the end of @INC.
+ *     Perl will automatically search below each path for version-
+ *     and architecture-specific directories.  See PERL_INC_VERSION_LIST
+ *     for more details.
+ */
+/*#define PERL_OTHERLIBDIRS " "                / **/
+
 /* IVTYPE:
  *     This symbol defines the C type used for Perl's IV.
  */

diff --git a/config_h.SH b/config_h.SH
index cc35077..5bb7ddd 100644 (file)
--- a/config_h.SH
+++ b/config_h.SH
@@ -2606,6 +2606,16 @@ sed <<!GROK!THIS! >config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un-
 #define Netdb_name_t           $netdb_name_type /**/
 #define Netdb_net_t            $netdb_net_type /**/
 
+/* PERL_OTHERLIBDIRS:
+ *     This variable contains a colon-separated set of paths for the perl
+ *     binary to search for additional library files or modules.
+ *     These directories will be tacked to the end of @INC.
+ *     Perl will automatically search below each path for version-
+ *     and architecture-specific directories.  See PERL_INC_VERSION_LIST
+ *     for more details.
+ */
+#$d_perl_otherlibdirs PERL_OTHERLIBDIRS "$otherlibdirs"                /**/
+
 /* IVTYPE:
  *     This symbol defines the C type used for Perl's IV.
  */
@@ -2732,16 +2742,6 @@ sed <<!GROK!THIS! >config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un-
  */
 #define Pid_t $pidtype         /* PID type */
 
-/* PERL_OTHERLIBDIRS:
- *     This variable contains a colon-separated set of paths for the perl
- *     binary to search for additional library files or modules.
- *     These directories will be tacked to the end of @INC.
- *     Perl will automatically search below each path for version-
- *     and architecture-specific directories.  See PERL_INC_VERSION_LIST
- *     for more details.
- */
-#$d_perl_otherlibdirs PERL_OTHERLIBDIRS "$otherlibdirs"                /**/
-
 /* PRIVLIB:
  *     This symbol contains the name of the private library for this package.
  *     The library is private in the sense that it needn't be in anyone's