-If you read this file _as_is_, just ignore the funny characters you
-see. It is written in the POD format (see pod/perlpod.pod) which is
-specially designed to be readable as is.
+If you read this file _as_is_, just ignore the funny characters you see.
+It is written in the POD format (see pod/perlpod.pod) which is specially
+designed to be readable as is.
=head1 NAME
=head1 DESCRIPTION
-This document describes various features of HP's Unix operating system (HP-UX)
-that will affect how Perl version 5 (hereafter just Perl) is compiled and/or
-runs.
+This document describes various features of HP's Unix operating system
+(HP-UX) that will affect how Perl version 5 (hereafter just Perl) is
+compiled and/or runs.
=head2 Compiling Perl 5 on HP-UX
-An ANSI C compiler is required to build Perl. The C compiler that ships
-with all HP-UX systems is a K&R compiler that can only be used to build
-new kernels.
+When compiling Perl, you must use an ANSI C compiler. The C compiler
+that ships with all HP-UX systems is a K&R compiler that should only be
+used to build new kernels.
Perl can be compiled with either HP's ANSI C compiler or with gcc. The
-former is recommended, as not only can it compile Perl with no difficulty,
-but also can take advantage of features listed later that require the use
-of HP compiler-specific command-line flags.
+former is recommended, as not only can it compile Perl with no
+difficulty, but also can take advantage of features listed later that
+require the use of HP compiler-specific command-line flags.
-If you decide to use gcc, make sure your installation is recent and complete,
-and be sure to read the Perl README file for more gcc-specific details.
+If you decide to use gcc, make sure your installation is recent and
+complete, and be sure to read the Perl README file for more gcc-specific
+details.
=head2 PA-RISC
-HP's current Unix systems run on its own Precision Architecture (PA-RISC) chip.
-HP-UX used to run on the Motorola MC68000 family of chips, but any machine with
-this chip in it is quite obsolete and this document will not attempt to address
-issues for compiling Perl on the Motorola chipset.
+HP's current Unix systems run on its own Precision Architecture
+(PA-RISC) chip. HP-UX used to run on the Motorola MC68000 family of
+chips, but any machine with this chip in it is quite obsolete and this
+document will not attempt to address issues for compiling Perl on the
+Motorola chipset.
-The most recent version of PA-RISC at the time of this document's last update
-is 2.0.
+The most recent version of PA-RISC at the time of this document's last
+update is 2.0.
=head2 PA-RISC 1.0
The following systems contain PA-RISC 1.0 chips:
- 600, 635, 645, 800, 808, 815, 822, 825, 832, 834, 835, 840,
- 842, 845, 850, 852, 855, 860, 865, 870, 890
+ 600, 635, 645, 808, 815, 822, 825, 832, 834, 835, 840, 842, 845, 850, 852,
+ 855, 860, 865, 870, 890
=head2 PA-RISC 1.1
The following systems contain with PA-RISC 1.1 chips:
- 705, 710, 712, 715, 720, 722, 725, 728, 730, 735, 743, 745, 747, 750,
- 755, 770, 807S, 817S, 827S, 837S, 847S, 857S, 867S, 877S, 887S, 897S,
- D200, D210, D220, D230, D250, D260, D310, D320, D330, D350, D360, D400,
- E25, E35, E45, E55, F10, F20, F30, G30, G40, G50, G60, G70, H30, H40,
- H50, H60, H70, I30, I40, I50, I60, I70, K100, K200, K210, K220, K400,
- K410, K420, T500, T520
-
+ 705, 710, 712, 715, 720, 722, 725, 728, 730, 735, 742, 743, 745, 747, 750,
+ 755, 770, 777, 778, 779, 800, 801, 803, 806, 807, 809, 811, 813, 816, 817,
+ 819, 821, 826, 827, 829, 831, 837, 839, 841, 847, 849, 851, 856, 857, 859,
+ 867, 869, 877, 887, 891, 892, 897, A180, A180C, B115, B120, B132L, B132L+,
+ B160L, B180L, C100, C110, C115, C120, C160L, D200, D210, D220, D230, D250,
+ D260, D310, D320, D330, D350, D360, D410, DX0, DX5, DZO, E25, E35, E45,
+ E55, F10, F20, F30, G30, G40, G50, G60, G70, H20, H30, H40, H50, H60, H70,
+ I30, I40, I50, I60, I70, J200, J210, J210XC, K100, K200, K210, K220, K230,
+ K400, K410, K420, S700i, S715, S724, S760, T500, T520
=head2 PA-RISC 2.0
-The most recent upgrade to the PA-RISC design, it added support for 64-bit
-integer data.
+The most recent upgrade to the PA-RISC design, it added support for
+64-bit integer data.
-The following systems contain PA-RISC 2.0 chips (this is very likely to be
-out of date):
+As of the date of this document's last update, the following systems
+contain PA-RISC 2.0 chips (this is very likely to be out of date):
- D270, D280, D370, D380, K250, K260, K370, K380, K450, K460, K570, K580,
- T600, V2200, N-class
+ 700, 780, 781, 782, 783, 785, 802, 804, 810, 820, 861, 871, 879, 889, 893,
+ 895, 896, 898, 899, B1000, C130, C140, C160, C180, C180+, C180-XP, C200+,
+ C400+, C3000, C360, CB260, D270, D280, D370, D380, D390, D650, J220, J2240,
+ J280, J282, J400, J410, J5000, J7000, K250, K260, K260-EG, K270, K360,
+ K370, K380, K450, K460, K460-EG, K460-XP, K470, K570, K580, L1000, L2000,
+ N4000, R380, R390, T540, T600, V2000, V2200, V2250, V2500
A complete list of models at the time the OS was built is in the file
-/opt/langtools/lib/sched.models.
-The first column corresponds to the output of the "uname -m" command
-(without the leading "9000/").
-The second column is the PA-RISC version
-and the third column is the exact chip type used.
+/opt/langtools/lib/sched.models. The first column corresponds to the
+output of the "uname -m" command (without the leading "9000/"). The
+second column is the PA-RISC version and the third column is the exact
+chip type used.
=head2 Portability Between PA-RISC Versions
An executable compiled on a PA-RISC 2.0 platform will not execute on a
-PA-RISC 1.1 platform, even if they are running the same version of HP-UX.
-If you are building Perl on a PA-RISC 2.0 platform and want that Perl to
-to also run on a PA-RISC 1.1, the compiler flags +DAportable and +DS32
-should be used.
+PA-RISC 1.1 platform, even if they are running the same version of
+HP-UX. If you are building Perl on a PA-RISC 2.0 platform and want that
+Perl to to also run on a PA-RISC 1.1, the compiler flags +DAportable and
++DS32 should be used.
-It is no longer possible to compile PA-RISC 1.0 executables on either the
-PA-RISC 1.1 or 2.0 platforms.
+It is no longer possible to compile PA-RISC 1.0 executables on either
+the PA-RISC 1.1 or 2.0 platforms.
=head2 Building Dynamic Extensions on HP-UX
HP-UX supports dynamically loadable libraries (shared libraries).
Shared libraries end with the suffix .sl.
-Shared libraries created on a platform using a particular PA-RISC version
-are not usable on platforms using an earlier PA-RISC version by default.
-However, this backwards compatibility may be enabled using the same
-+DAportable compiler flag (with the same PA-RISC 1.0 caveat mentioned above).
+Shared libraries created on a platform using a particular PA-RISC
+version are not usable on platforms using an earlier PA-RISC version by
+default. However, this backwards compatibility may be enabled using the
+same +DAportable compiler flag (with the same PA-RISC 1.0 caveat
+mentioned above).
To create a shared library, the following steps must be performed:
time, you will get fatal "Unresolved symbol" errors at run time when the
library is loaded.
-You may create a shared library that refers to another library, which
-may be either an archive library or a shared library. If it is a
-shared library, this is called a "dependent library".
-The dependent library's name is recorded in the main shared library,
-but it is not linked into the shared library.
-Instead, it is loaded when the main shared library is loaded.
+You may create a shared library that referers to another library, which
+may be either an archive library or a shared library. If this second
+library is a shared library, this is called a "dependent library". The
+dependent library's name is recorded in the main shared library, but it
+is not linked into the shared library. Instead, it is loaded when the
+main shared library is loaded. This can cause problems if you build an
+extension on one system and move it to another system where the
+libraries may not be located in the same place as on the first system.
If the referred library is an archive library, then it is treated as a
simple collection of .o modules (all of which must contain PIC). These
modules are then linked into the shared library.
-Note that it is okay to create a library which contains a dependent library
-that is already linked into perl.
+Note that it is okay to create a library which contains a dependent
+library that is already linked into perl.
It is no longer possible to link PA-RISC 1.0 shared libraries.
=head2 The HP ANSI C Compiler
-When using this compiler to build Perl, you should make sure that
-the flag -Aa is added to the cpprun and cppstdin variables in the
-config.sh file.
+When using this compiler to build Perl, you should make sure that the
+flag -Aa is added to the cpprun and cppstdin variables in the config.sh
+file (though see the section on 64-bit perl below).
=head2 Using Large Files with Perl
-Beginning with HP-UX version 10.20, files larger than 2GB (2^31) may be
-created and manipulated.
-Three separate methods of doing this are available.
-Of these methods,
-the best method for Perl is to compile using the -Duselargefiles
-flag to Configure.
-This will cause the -D_FILE_OFFSET_BITS=64 compiler flag to be used
-when building Perl.
-This causes Perl to be compiled using structures and functions in which
-these are 64 bits wide, rather than 32 bits wide.
-(Note that this will only work with HP's ANSI C compiler.
-If you want to compile Perl using gcc, you will have to get a version
-of the compiler that support 64-bit operations.)
-
-The one drawback to this approach is that
-any extension which calls any file-manipulating C function
-will need to be recompiled
+Beginning with HP-UX version 10.20, files larger than 2GB (2^31 bytes)
+may be created and manipulated. Three separate methods of doing this
+are available. Of these methods, the best method for Perl is to compile
+using the -Duselargefiles flag to Configure. This causes Perl to be
+compiled using structures and functions in which these are 64 bits wide,
+rather than 32 bits wide. (Note that this will only work with HP's ANSI
+C compiler. If you want to compile Perl using gcc, you will have to get
+a version of the compiler that support 64-bit operations.)
+
+There are some drawbacks to this approach. One is that any extension
+which calls any file-manipulating C function will need to be recompiled
(just follow the usual "perl Makefile.PL; make; make test; make install"
procedure).
+
The list of functions that will need to recompiled is:
creat, fgetpos, fopen,
freopen, fsetpos, fstat,
statvfs, statvfsdev, tmpfile,
truncate, getrlimit, setrlimit
+Another drawback is only valid for Perl versions before 5.6.0. This
+drawback is that the seek and tell functions (both the builtin version
+and POSIX module version) will not perform correctly.
+
+It is strongly recommended that you use this flag when you run
+Configure. If you do not do this, but later answer the question about
+large files when Configure asks you, you may get a configuration that
+cannot be compiled, or that does not function as expected.
+
=head2 Threaded Perl
It is impossible to compile a version of threaded Perl on any version of
HP-UX before 10.30, and it is strongly suggested that you be running on
HP-UX 11.00 at least.
-To compile Perl with thread, add -Dusethreads to the arguments of Configure.
-Ensure that the -D_POSIX_C_SOURCE=199506L compiler flag is automatically
-added to the list of flags. Also make sure that -lpthread is listed before
--lc in the list of libraries to link Perl with.
+To compile Perl with threads, add -Dusethreads to the arguments of
+Configure. Verify that the -D_POSIX_C_SOURCE=199506L compiler flag is
+automatically added to the list of flags. Also make sure that -lpthread
+is listed before -lc in the list of libraries to link Perl with.
-As of the date of this document,
-Perl threads are not fully supported on HP-UX.
+As of the date of this document, Perl threads are not fully supported on
+HP-UX.
=head2 64-bit Perl
-Beginning with HP-UX 11.00, programs compiled under HP-UX can take advantage
-of the LP64 programming environment (LP64 means Longs and Pointers are 64 bits
-wide).
+Beginning with HP-UX 11.00, programs compiled under HP-UX can take
+advantage of the LP64 programming environment (LP64 means Longs and
+Pointers are 64 bits wide).
-Work is being performed on Perl to make it 64-bit compliant on all versions
-of Unix. Once this is complete, scalar variables will be able to hold
-numbers larger than 2^32 with complete precision.
+Work is being performed on Perl to make it 64-bit compliant on all
+versions of Unix. Once this is complete, scalar variables will be able
+to hold numbers larger than 2^32 with complete precision.
As of the date of this document, Perl is not 64-bit compliant on HP-UX.
-Should a user wish to experiment with compiling Perl in the LP64 environment,
-use the -Duse64bitall flag to Configure.
-This will force Perl to be compiled in a pure LP64 environment (via the
-+DD64 flag).
+Should a user wish to experiment with compiling Perl in the LP64
+environment, use the -Duse64bitall flag to Configure. This will force
+Perl to be compiled in a pure LP64 environment (via the +DD64 flag).
-You can also use the -Duse64bitint flag to Configure.
-Although there are some minor differences between compiling Perl with
-this flag versus the -Duse64bitall flag,
-they should not be noticeable from a Perl user's perspective.
+You can also use the -Duse64bitint flag to Configure. Although there
+are some minor differences between compiling Perl with this flag versus
+the -Duse64bitall flag, they should not be noticeable from a Perl user's
+perspective.
-In both cases, it is strongly recommended that you use these flags
-when you run Configure.
-If you do not use them, but answer the questions about 64-bit numbers
-when Configure asks you,
-you may get a configuration that cannot be compiled, or that does
-not function as expected.
+In both cases, it is strongly recommended that you use these flags when
+you run Configure. If you do not use do this, but later answer the
+questions about 64-bit numbers when Configure asks you, you may get a
+configuration that cannot be compiled, or that does not function as
+expected.
-(Note that these Configure flags will only work with HP's ANSI C compiler.
-If you want to compile Perl using gcc, you will have to get a version
-of the compiler that support 64-bit operations.)
+(Note that these Configure flags will only work with HP's ANSI C
+compiler. If you want to compile Perl using gcc, you will have to get a
+version of the compiler that support 64-bit operations.)
=head2 GDBM and Threads
-If you attempt to compile Perl with threads on an 11.X system and also link
-in the GDBM library, then Perl will immediately core dump when it starts up.
-The only workaround at this point is to relink the GDBM library under 11.X,
-then relink it into Perl.
+If you attempt to compile Perl with threads on an 11.X system and also
+link in the GDBM library, then Perl will immediately core dump when it
+starts up. The only workaround at this point is to relink the GDBM
+library under 11.X, then relink it into Perl.
=head2 NFS filesystems and utime(2)
If you are compiling Perl on a remotely-mounted NFS filesystem, the test
-io/fs.t may fail on test #18.
-This appears to be a bug in HP-UX and no fix is currently available.
+io/fs.t may fail on test #18. This appears to be a bug in HP-UX and no
+fix is currently available.
=head1 AUTHOR
=head1 DATE
-Version 0.3: 2000/03/31
+Version 0.6.1: 2000/06/20
=cut
projects / p5sagit/p5-mst-13.2.git / commitdiff