--- /dev/null
+=head1 NAME
+
+perldelta - what's new for perl v5.6.x
+
+=head1 DESCRIPTION
+
+This document describes differences between the 5.005 release and the 5.6.1
+release.
+
+=head1 Summary of changes between 5.6.0 and 5.6.1
+
+This section contains a summary of the changes between the 5.6.0 release
+and the 5.6.1 release. More details about the changes mentioned here
+may be found in the F<Changes> files that accompany the Perl source
+distribution. See L<perlhack> for pointers to online resources where you
+can inspect the individual patches described by these changes.
+
+=head2 Security Issues
+
+suidperl will not run /bin/mail anymore, because some platforms have
+a /bin/mail that is vulnerable to buffer overflow attacks.
+
+Note that suidperl is neither built nor installed by default in
+any recent version of perl. Use of suidperl is highly discouraged.
+If you think you need it, try alternatives such as sudo first.
+See http://www.courtesan.com/sudo/.
+
+=head2 Core bug fixes
+
+This is not an exhaustive list. It is intended to cover only the
+significant user-visible changes.
+
+=over
+
+=item C<UNIVERSAL::isa()>
+
+A bug in the caching mechanism used by C<UNIVERSAL::isa()> that affected
+base.pm has been fixed. The bug has existed since the 5.005 releases,
+but wasn't tickled by base.pm in those releases.
+
+=item Memory leaks
+
+Various cases of memory leaks and attempts to access uninitialized memory
+have been cured. See L</"Known Problems"> below for further issues.
+
+=item Numeric conversions
+
+Numeric conversions did not recognize changes in the string value
+properly in certain circumstances.
+
+In other situations, large unsigned numbers (those above 2**31) could
+sometimes lose their unsignedness, causing bogus results in arithmetic
+operations.
+
+Integer modulus on large unsigned integers sometimes returned
+incorrect values.
+
+Perl 5.6.0 generated "not a number" warnings on certain conversions where
+previous versions didn't.
+
+These problems have all been rectified.
+
+Infinity is now recognized as a number.
+
+=item qw(a\\b)
+
+In Perl 5.6.0, qw(a\\b) produced a string with two backslashes instead
+of one, in a departure from the behavior in previous versions. The
+older behavior has been reinstated.
+
+=item caller()
+
+caller() could cause core dumps in certain situations. Carp was sometimes
+affected by this problem.
+
+=item Bugs in regular expressions
+
+Pattern matches on overloaded values are now handled correctly.
+
+Perl 5.6.0 parsed m/\x{ab}/ incorrectly, leading to spurious warnings.
+This has been corrected.
+
+The RE engine found in Perl 5.6.0 accidentally pessimised certain kinds
+of simple pattern matches. These are now handled better.
+
+Regular expression debug output (whether through C<use re 'debug'>
+or via C<-Dr>) now looks better.
+
+Multi-line matches like C<"a\nxb\n" =~ /(?!\A)x/m> were flawed. The
+bug has been fixed.
+
+Use of $& could trigger a core dump under some situations. This
+is now avoided.
+
+Match variables $1 et al., weren't being unset when a pattern match
+was backtracking, and the anomaly showed up inside C</...(?{ ... }).../>
+etc. These variables are now tracked correctly.
+
+pos() did not return the correct value within s///ge in earlier
+versions. This is now handled correctly.
+
+=item "slurp" mode
+
+readline() on files opened in "slurp" mode could return an extra "" at
+the end in certain situations. This has been corrected.
+
+=item Autovivification of symbolic references to special variables
+
+Autovivification of symbolic references of special variables described
+in L<perlvar> (as in C<${$num}>) was accidentally disabled. This works
+again now.
+
+=item Lexical warnings
+
+Lexical warnings now propagate correctly into C<eval "...">.
+
+C<use warnings qw(FATAL all)> did not work as intended. This has been
+corrected.
+
+Lexical warnings could leak into other scopes in some situations.
+This is now fixed.
+
+warnings::enabled() now reports the state of $^W correctly if the caller
+isn't using lexical warnings.
+
+=item Spurious warnings and errors
+
+Perl 5.6.0 could emit spurious warnings about redefinition of dl_error()
+when statically building extensions into perl. This has been corrected.
+
+"our" variables could result in bogus "Variable will not stay shared"
+warnings. This is now fixed.
+
+"our" variables of the same name declared in two sibling blocks
+resulted in bogus warnings about "redeclaration" of the variables.
+The problem has been corrected.
+
+=item glob()
+
+Compatibility of the builtin glob() with old csh-based glob has been
+improved with the addition of GLOB_ALPHASORT option. See C<File::Glob>.
+
+File::Glob::glob() has been renamed to File::Glob::bsd_glob()
+because the name clashes with the builtin glob(). The older
+name is still available for compatibility, but is deprecated.
+
+Spurious syntax errors generated in certain situations, when glob()
+caused File::Glob to be loaded for the first time, have been fixed.
+
+=item Tainting
+
+Some cases of inconsistent taint propagation (such as within hash
+values) have been fixed.
+
+The tainting behavior of sprintf() has been rationalized. It does
+not taint the result of floating point formats anymore, making the
+behavior consistent with that of string interpolation.
+
+=item sort()
+
+Arguments to sort() weren't being provided the right wantarray() context.
+The comparison block is now run in scalar context, and the arguments to
+be sorted are always provided list context.
+
+sort() is also fully reentrant, in the sense that the sort function
+can itself call sort(). This did not work reliably in previous releases.
+
+=item #line directives
+
+#line directives now work correctly when they appear at the very
+beginning of C<eval "...">.
+
+=item Subroutine prototypes
+
+The (\&) prototype now works properly.
+
+=item map()
+
+map() could get pathologically slow when the result list it generates
+is larger than the source list. The performance has been improved for
+common scenarios.
+
+=item Debugger
+
+Debugger exit code now reflects the script exit code.
+
+Condition C<"0"> in breakpoints is now treated correctly.
+
+The C<d> command now checks the line number.
+
+C<$.> is no longer corrupted by the debugger.
+
+All debugger output now correctly goes to the socket if RemotePort
+is set.
+
+=item PERL5OPT
+
+PERL5OPT can be set to more than one switch group. Previously,
+it used to be limited to one group of options only.
+
+=item chop()
+
+chop(@list) in list context returned the characters chopped in reverse
+order. This has been reversed to be in the right order.
+
+=item Unicode support
+
+Unicode support has seen a large number of incremental improvements,
+but continues to be highly experimental. It is not expected to be
+fully supported in the 5.6.x maintenance releases.
+
+substr(), join(), repeat(), reverse(), quotemeta() and string
+concatenation were all handling Unicode strings incorrectly in
+Perl 5.6.0. This has been corrected.
+
+Support for C<tr///CU> and C<tr///UC> etc., have been removed since
+we realized the interface is broken. For similar functionality,
+see L<perlfunc/pack>.
+
+The Unicode Character Database has been updated to version 3.0.1
+with additions made available to the public as of August 30, 2000.
+
+The Unicode character classes \p{Blank} and \p{SpacePerl} have been
+added. "Blank" is like C isblank(), that is, it contains only
+"horizontal whitespace" (the space character is, the newline isn't),
+and the "SpacePerl" is the Unicode equivalent of C<\s> (\p{Space}
+isn't, since that includes the vertical tabulator character, whereas
+C<\s> doesn't.)
+
+If you are experimenting with Unicode support in perl, the development
+versions of Perl may have more to offer. In particular, I/O layers
+are now available in the development track, but not in the maintenance
+track, primarily to do backward compatibility issues. Unicode support
+is also evolving rapidly on a daily basis in the development track--the
+maintenance track only reflects the most conservative of these changes.
+
+=item 64-bit support
+
+Support for 64-bit platforms has been improved, but continues to be
+experimental. The level of support varies greatly among platforms.
+
+=item Compiler
+
+The B Compiler and its various backends have had many incremental
+improvements, but they continue to remain highly experimental. Use in
+production environments is discouraged.
+
+The perlcc tool has been rewritten so that the user interface is much
+more like that of a C compiler.
+
+The perlbc tools has been removed. Use C<perlcc -B> instead.
+
+=item Lvalue subroutines
+
+There have been various bugfixes to support lvalue subroutines better.
+However, the feature still remains experimental.
+
+=item IO::Socket
+
+IO::Socket::INET failed to open the specified port if the service
+name was not known. It now correctly uses the supplied port number
+as is.
+
+=item File::Find
+
+File::Find now chdir()s correctly when chasing symbolic links.
+
+=item xsubpp
+
+xsubpp now tolerates embedded POD sections.
+
+=item C<no Module;>
+
+C<no Module;> does not produce an error even if Module does not have an
+unimport() method. This parallels the behavior of C<use> vis-a-vis
+C<import>.
+
+=item Tests
+
+A large number of tests have been added.
+
+=back
+
+=head2 Core features
+
+untie() will now call an UNTIE() hook if it exists. See L<perltie>
+for details.
+
+The C<-DT> command line switch outputs copious tokenizing information.
+See L<perlrun>.
+
+Arrays are now always interpolated in double-quotish strings. Previously,
+C<"foo@bar.com"> used to be a fatal error at compile time, if an array
+C<@bar> was not used or declared. This transitional behavior was
+intended to help migrate perl4 code, and is deemed to be no longer useful.
+See L</"Arrays now always interpolate into double-quoted strings">.
+
+keys(), each(), pop(), push(), shift(), splice() and unshift()
+can all be overridden now.
+
+C<my __PACKAGE__ $obj> now does the expected thing.
+
+=head2 Configuration issues
+
+On some systems (IRIX and Solaris among them) the system malloc is demonstrably
+better. While the defaults haven't been changed in order to retain binary
+compatibility with earlier releases, you may be better off building perl
+with C<Configure -Uusemymalloc ...> as discussed in the F<INSTALL> file.
+
+C<Configure> has been enhanced in various ways:
+
+=over
+
+=item *
+
+Minimizes use of temporary files.
+
+=item *
+
+By default, does not link perl with libraries not used by it, such as
+the various dbm libraries. SunOS 4.x hints preserve behavior on that
+platform.
+
+=item *
+
+Support for pdp11-style memory models has been removed due to obsolescence.
+
+=item *
+
+Building outside the source tree is supported on systems that have
+symbolic links. This is done by running
+
+ sh /path/to/source/Configure -Dmksymlinks ...
+ make all test install
+
+in a directory other than the perl source directory. See F<INSTALL>.
+
+=item *
+
+C<Configure -S> can be run non-interactively.
+
+=back
+
+=head2 Documentation
+
+README.aix, README.solaris and README.macos have been added. README.posix-bc
+has been renamed to README.bs2000. These are installed as L<perlaix>,
+L<perlsolaris>, L<perlmacos>, and L<perlbs2000> respectively.
+
+The following pod documents are brand new:
+
+ perlclib Internal replacements for standard C library functions
+ perldebtut Perl debugging tutorial
+ perlebcdic Considerations for running Perl on EBCDIC platforms
+ perlnewmod Perl modules: preparing a new module for distribution
+ perlrequick Perl regular expressions quick start
+ perlretut Perl regular expressions tutorial
+ perlutil utilities packaged with the Perl distribution
+
+The F<INSTALL> file has been expanded to cover various issues, such as
+64-bit support.
+
+A longer list of contributors has been added to the source distribution.
+See the file C<AUTHORS>.
+
+Numerous other changes have been made to the included documentation and FAQs.
+
+=head2 Bundled modules
+
+The following modules have been added.
+
+=over
+
+=item B::Concise
+
+Walks Perl syntax tree, printing concise info about ops. See L<B::Concise>.
+
+=item File::Temp
+
+Returns name and handle of a temporary file safely. See L<File::Temp>.
+
+=item Pod::LaTeX
+
+Converts Pod data to formatted LaTeX. See L<Pod::LaTeX>.
+
+=item Pod::Text::Overstrike
+
+Converts POD data to formatted overstrike text. See L<Pod::Text::Overstrike>.
+
+=back
+
+The following modules have been upgraded.
+
+=over
+
+=item CGI
+
+CGI v2.752 is now included.
+
+=item CPAN
+
+CPAN v1.59_54 is now included.
+
+=item Class::Struct
+
+Various bugfixes have been added.
+
+=item DB_File
+
+DB_File v1.75 supports newer Berkeley DB versions, among other
+improvements.
+
+=item Devel::Peek
+
+Devel::Peek has been enhanced to support dumping of memory statistics,
+when perl is built with the included malloc().
+
+=item File::Find
+
+File::Find now supports pre and post-processing of the files in order
+to sort() them, etc.
+
+=item Getopt::Long
+
+Getopt::Long v2.25 is included.
+
+=item IO::Poll
+
+Various bug fixes have been included.
+
+=item IPC::Open3
+
+IPC::Open3 allows use of numeric file descriptors.
+
+=item Math::BigFloat
+
+The fmod() function supports modulus operations. Various bug fixes
+have also been included.
+
+=item Math::Complex
+
+Math::Complex handles inf, NaN etc., better.
+
+=item Net::Ping
+
+ping() could fail on odd number of data bytes, and when the echo service
+isn't running. This has been corrected.
+
+=item Opcode
+
+A memory leak has been fixed.
+
+=item Pod::Parser
+
+Version 1.13 of the Pod::Parser suite is included.
+
+=item Pod::Text
+
+Pod::Text and related modules have been upgraded to the versions
+in podlators suite v2.08.
+
+=item SDBM_File
+
+On dosish platforms, some keys went missing because of lack of support for
+files with "holes". A workaround for the problem has been added.
+
+=item Sys::Syslog
+
+Various bug fixes have been included.
+
+=item Tie::RefHash
+
+Now supports Tie::RefHash::Nestable to automagically tie hashref values.
+
+=item Tie::SubstrHash
+
+Various bug fixes have been included.
+
+=back
+
+=head2 Platform-specific improvements
+
+The following new ports are now available.
+
+=over
+
+=item NCR MP-RAS
+
+=item NonStop-UX
+
+=back
+
+Perl now builds under Amdahl UTS.
+
+Perl has also been verified to build under Amiga OS.
+
+Support for EPOC has been much improved. See README.epoc.
+
+Building perl with -Duseithreads or -Duse5005threads now works
+under HP-UX 10.20 (previously it only worked under 10.30 or later).
+You will need a thread library package installed. See README.hpux.
+
+Long doubles should now work under Linux.
+
+MacOS Classic is now supported in the mainstream source package.
+See README.macos.
+
+Support for MPE/iX has been updated. See README.mpeix.
+
+Support for OS/2 has been improved. See C<os2/Changes> and README.os2.
+
+Dynamic loading on z/OS (formerly OS/390) has been improved. See
+README.os390.
+
+Support for VMS has seen many incremental improvements, including
+better support for operators like backticks and system(), and better
+%ENV handling. See C<README.vms> and L<perlvms>.
+
+Support for Stratus VOS has been improved. See C<vos/Changes> and README.vos.
+
+Support for Windows has been improved.
+
+=over
+
+=item *
+
+fork() emulation has been improved in various ways, but still continues
+to be experimental. See L<perlfork> for known bugs and caveats.
+
+=item *
+
+%SIG has been enabled under USE_ITHREADS, but its use is completely
+unsupported under all configurations.
+
+=item *
+
+Borland C++ v5.5 is now a supported compiler that can build Perl.
+However, the generated binaries continue to be incompatible with those
+generated by the other supported compilers (GCC and Visual C++).
+
+=item *
+
+Non-blocking waits for child processes (or pseudo-processes) are
+supported via C<waitpid($pid, &POSIX::WNOHANG)>.
+
+=item *
+
+A memory leak in accept() has been fixed.
+
+=item *
+
+wait(), waitpid() and backticks now return the correct exit status under
+Windows 9x.
+
+=item *
+
+Trailing new %ENV entries weren't propagated to child processes. This
+is now fixed.
+
+=item *
+
+Current directory entries in %ENV are now correctly propagated to child
+processes.
+
+=item *
+
+Duping socket handles with open(F, ">&MYSOCK") now works under Windows 9x.
+
+=item *
+
+The makefiles now provide a single switch to bulk-enable all the features
+enabled in ActiveState ActivePerl (a popular binary distribution).
+
+=item *
+
+Win32::GetCwd() correctly returns C:\ instead of C: when at the drive root.
+Other bugs in chdir() and Cwd::cwd() have also been fixed.
+
+=item *
+
+fork() correctly returns undef and sets EAGAIN when it runs out of
+pseudo-process handles.
+
+=item *
+
+ExtUtils::MakeMaker now uses $ENV{LIB} to search for libraries.
+
+=item *
+
+UNC path handling is better when perl is built to support fork().
+
+=item *
+
+A handle leak in socket handling has been fixed.
+
+=item *
+
+send() works from within a pseudo-process.
+
+=back
+
+Unless specifically qualified otherwise, the remainder of this document
+covers changes between the 5.005 and 5.6.0 releases.
+
+=head1 Core Enhancements
+
+=head2 Interpreter cloning, threads, and concurrency
+
+Perl 5.6.0 introduces the beginnings of support for running multiple
+interpreters concurrently in different threads. In conjunction with
+the perl_clone() API call, which can be used to selectively duplicate
+the state of any given interpreter, it is possible to compile a
+piece of code once in an interpreter, clone that interpreter
+one or more times, and run all the resulting interpreters in distinct
+threads.
+
+On the Windows platform, this feature is used to emulate fork() at the
+interpreter level. See L<perlfork> for details about that.
+
+This feature is still in evolution. It is eventually meant to be used
+to selectively clone a subroutine and data reachable from that
+subroutine in a separate interpreter and run the cloned subroutine
+in a separate thread. Since there is no shared data between the
+interpreters, little or no locking will be needed (unless parts of
+the symbol table are explicitly shared). This is obviously intended
+to be an easy-to-use replacement for the existing threads support.
+
+Support for cloning interpreters and interpreter concurrency can be
+enabled using the -Dusethreads Configure option (see win32/Makefile for
+how to enable it on Windows.) The resulting perl executable will be
+functionally identical to one that was built with -Dmultiplicity, but
+the perl_clone() API call will only be available in the former.
+
+-Dusethreads enables the cpp macro USE_ITHREADS by default, which in turn
+enables Perl source code changes that provide a clear separation between
+the op tree and the data it operates with. The former is immutable, and
+can therefore be shared between an interpreter and all of its clones,
+while the latter is considered local to each interpreter, and is therefore
+copied for each clone.
+
+Note that building Perl with the -Dusemultiplicity Configure option
+is adequate if you wish to run multiple B<independent> interpreters
+concurrently in different threads. -Dusethreads only provides the
+additional functionality of the perl_clone() API call and other
+support for running B<cloned> interpreters concurrently.
+
+ NOTE: This is an experimental feature. Implementation details are
+ subject to change.
+
+=head2 Lexically scoped warning categories
+
+You can now control the granularity of warnings emitted by perl at a finer
+level using the C<use warnings> pragma. L<warnings> and L<perllexwarn>
+have copious documentation on this feature.
+
+=head2 Unicode and UTF-8 support
+
+Perl now uses UTF-8 as its internal representation for character
+strings. The C<utf8> and C<bytes> pragmas are used to control this support
+in the current lexical scope. See L<perlunicode>, L<utf8> and L<bytes> for
+more information.
+
+This feature is expected to evolve quickly to support some form of I/O
+disciplines that can be used to specify the kind of input and output data
+(bytes or characters). Until that happens, additional modules from CPAN
+will be needed to complete the toolkit for dealing with Unicode.
+
+ NOTE: This should be considered an experimental feature. Implementation
+ details are subject to change.
+
+=head2 Support for interpolating named characters
+
+The new C<\N> escape interpolates named characters within strings.
+For example, C<"Hi! \N{WHITE SMILING FACE}"> evaluates to a string
+with a Unicode smiley face at the end.
+
+=head2 "our" declarations
+
+An "our" declaration introduces a value that can be best understood
+as a lexically scoped symbolic alias to a global variable in the
+package that was current where the variable was declared. This is
+mostly useful as an alternative to the C<vars> pragma, but also provides
+the opportunity to introduce typing and other attributes for such
+variables. See L<perlfunc/our>.
+
+=head2 Support for strings represented as a vector of ordinals
+
+Literals of the form C<v1.2.3.4> are now parsed as a string composed
+of characters with the specified ordinals. This is an alternative, more
+readable way to construct (possibly Unicode) strings instead of
+interpolating characters, as in C<"\x{1}\x{2}\x{3}\x{4}">. The leading
+C<v> may be omitted if there are more than two ordinals, so C<1.2.3> is
+parsed the same as C<v1.2.3>.
+
+Strings written in this form are also useful to represent version "numbers".
+It is easy to compare such version "numbers" (which are really just plain
+strings) using any of the usual string comparison operators C<eq>, C<ne>,
+C<lt>, C<gt>, etc., or perform bitwise string operations on them using C<|>,
+C<&>, etc.
+
+In conjunction with the new C<$^V> magic variable (which contains
+the perl version as a string), such literals can be used as a readable way
+to check if you're running a particular version of Perl:
+
+ # this will parse in older versions of Perl also
+ if ($^V and $^V gt v5.6.0) {
+ # new features supported
+ }
+
+C<require> and C<use> also have some special magic to support such literals.
+They will be interpreted as a version rather than as a module name:
+
+ require v5.6.0; # croak if $^V lt v5.6.0
+ use v5.6.0; # same, but croaks at compile-time
+
+Alternatively, the C<v> may be omitted if there is more than one dot:
+
+ require 5.6.0;
+ use 5.6.0;
+
+Also, C<sprintf> and C<printf> support the Perl-specific format flag C<%v>
+to print ordinals of characters in arbitrary strings:
+
+ printf "v%vd", $^V; # prints current version, such as "v5.5.650"
+ printf "%*vX", ":", $addr; # formats IPv6 address
+ printf "%*vb", " ", $bits; # displays bitstring
+
+See L<perldata/"Scalar value constructors"> for additional information.
+
+=head2 Improved Perl version numbering system
+
+Beginning with Perl version 5.6.0, the version number convention has been
+changed to a "dotted integer" scheme that is more commonly found in open
+source projects.
+
+Maintenance versions of v5.6.0 will be released as v5.6.1, v5.6.2 etc.
+The next development series following v5.6.0 will be numbered v5.7.x,
+beginning with v5.7.0, and the next major production release following
+v5.6.0 will be v5.8.0.
+
+The English module now sets $PERL_VERSION to $^V (a string value) rather
+than C<$]> (a numeric value). (This is a potential incompatibility.
+Send us a report via perlbug if you are affected by this.)
+
+The v1.2.3 syntax is also now legal in Perl.
+See L<Support for strings represented as a vector of ordinals> for more on that.
+
+To cope with the new versioning system's use of at least three significant
+digits for each version component, the method used for incrementing the
+subversion number has also changed slightly. We assume that versions older
+than v5.6.0 have been incrementing the subversion component in multiples of
+10. Versions after v5.6.0 will increment them by 1. Thus, using the new
+notation, 5.005_03 is the "same" as v5.5.30, and the first maintenance
+version following v5.6.0 will be v5.6.1 (which should be read as being
+equivalent to a floating point value of 5.006_001 in the older format,
+stored in C<$]>).
+
+=head2 New syntax for declaring subroutine attributes
+
+Formerly, if you wanted to mark a subroutine as being a method call or
+as requiring an automatic lock() when it is entered, you had to declare
+that with a C<use attrs> pragma in the body of the subroutine.
+That can now be accomplished with declaration syntax, like this:
+
+ sub mymethod : locked method ;
+ ...
+ sub mymethod : locked method {
+ ...
+ }
+
+ sub othermethod :locked :method ;
+ ...
+ sub othermethod :locked :method {
+ ...
+ }
+
+
+(Note how only the first C<:> is mandatory, and whitespace surrounding
+the C<:> is optional.)
+
+F<AutoSplit.pm> and F<SelfLoader.pm> have been updated to keep the attributes
+with the stubs they provide. See L<attributes>.
+
+=head2 File and directory handles can be autovivified
+
+Similar to how constructs such as C<< $x->[0] >> autovivify a reference,
+handle constructors (open(), opendir(), pipe(), socketpair(), sysopen(),
+socket(), and accept()) now autovivify a file or directory handle
+if the handle passed to them is an uninitialized scalar variable. This
+allows the constructs such as C<open(my $fh, ...)> and C<open(local $fh,...)>
+to be used to create filehandles that will conveniently be closed
+automatically when the scope ends, provided there are no other references
+to them. This largely eliminates the need for typeglobs when opening
+filehandles that must be passed around, as in the following example:
+
+ sub myopen {
+ open my $fh, "@_"
+ or die "Can't open '@_': $!";
+ return $fh;
+ }
+
+ {
+ my $f = myopen("</etc/motd");
+ print <$f>;
+ # $f implicitly closed here
+ }
+
+=head2 open() with more than two arguments
+
+If open() is passed three arguments instead of two, the second argument
+is used as the mode and the third argument is taken to be the file name.
+This is primarily useful for protecting against unintended magic behavior
+of the traditional two-argument form. See L<perlfunc/open>.
+
+=head2 64-bit support
+
+Any platform that has 64-bit integers either
+
+ (1) natively as longs or ints
+ (2) via special compiler flags
+ (3) using long long or int64_t
+
+is able to use "quads" (64-bit integers) as follows:
+
+=over 4
+
+=item *
+
+constants (decimal, hexadecimal, octal, binary) in the code
+
+=item *
+
+arguments to oct() and hex()
+
+=item *
+
+arguments to print(), printf() and sprintf() (flag prefixes ll, L, q)
+
+=item *
+
+printed as such
+
+=item *
+
+pack() and unpack() "q" and "Q" formats
+
+=item *
+
+in basic arithmetics: + - * / % (NOTE: operating close to the limits
+of the integer values may produce surprising results)
+
+=item *
+
+in bit arithmetics: & | ^ ~ << >> (NOTE: these used to be forced
+to be 32 bits wide but now operate on the full native width.)
+
+=item *
+
+vec()
+
+=back
+
+Note that unless you have the case (a) you will have to configure
+and compile Perl using the -Duse64bitint Configure flag.
+
+ NOTE: The Configure flags -Duselonglong and -Duse64bits have been
+ deprecated. Use -Duse64bitint instead.
+
+There are actually two modes of 64-bitness: the first one is achieved
+using Configure -Duse64bitint and the second one using Configure
+-Duse64bitall. The difference is that the first one is minimal and
+the second one maximal. The first works in more places than the second.
+
+The C<use64bitint> does only as much as is required to get 64-bit
+integers into Perl (this may mean, for example, using "long longs")
+while your memory may still be limited to 2 gigabytes (because your
+pointers could still be 32-bit). Note that the name C<64bitint> does
+not imply that your C compiler will be using 64-bit C<int>s (it might,
+but it doesn't have to): the C<use64bitint> means that you will be
+able to have 64 bits wide scalar values.
+
+The C<use64bitall> goes all the way by attempting to switch also
+integers (if it can), longs (and pointers) to being 64-bit. This may
+create an even more binary incompatible Perl than -Duse64bitint: the
+resulting executable may not run at all in a 32-bit box, or you may
+have to reboot/reconfigure/rebuild your operating system to be 64-bit
+aware.
+
+Natively 64-bit systems like Alpha and Cray need neither -Duse64bitint
+nor -Duse64bitall.
+
+Last but not least: note that due to Perl's habit of always using
+floating point numbers, the quads are still not true integers.
+When quads overflow their limits (0...18_446_744_073_709_551_615 unsigned,
+-9_223_372_036_854_775_808...9_223_372_036_854_775_807 signed), they
+are silently promoted to floating point numbers, after which they will
+start losing precision (in their lower digits).
+
+ NOTE: 64-bit support is still experimental on most platforms.
+ Existing support only covers the LP64 data model. In particular, the
+ LLP64 data model is not yet supported. 64-bit libraries and system
+ APIs on many platforms have not stabilized--your mileage may vary.
+
+=head2 Large file support
+
+If you have filesystems that support "large files" (files larger than
+2 gigabytes), you may now also be able to create and access them from
+Perl.
+
+ NOTE: The default action is to enable large file support, if
+ available on the platform.
+
+If the large file support is on, and you have a Fcntl constant
+O_LARGEFILE, the O_LARGEFILE is automatically added to the flags
+of sysopen().
+
+Beware that unless your filesystem also supports "sparse files" seeking
+to umpteen petabytes may be inadvisable.
+
+Note that in addition to requiring a proper file system to do large
+files you may also need to adjust your per-process (or your
+per-system, or per-process-group, or per-user-group) maximum filesize
+limits before running Perl scripts that try to handle large files,
+especially if you intend to write such files.
+
+Finally, in addition to your process/process group maximum filesize
+limits, you may have quota limits on your filesystems that stop you
+(your user id or your user group id) from using large files.
+
+Adjusting your process/user/group/file system/operating system limits
+is outside the scope of Perl core language. For process limits, you
+may try increasing the limits using your shell's limits/limit/ulimit
+command before running Perl. The BSD::Resource extension (not
+included with the standard Perl distribution) may also be of use, it
+offers the getrlimit/setrlimit interface that can be used to adjust
+process resource usage limits, including the maximum filesize limit.
+
+=head2 Long doubles
+
+In some systems you may be able to use long doubles to enhance the
+range and precision of your double precision floating point numbers
+(that is, Perl's numbers). Use Configure -Duselongdouble to enable
+this support (if it is available).
+
+=head2 "more bits"
+
+You can "Configure -Dusemorebits" to turn on both the 64-bit support
+and the long double support.
+
+=head2 Enhanced support for sort() subroutines
+
+Perl subroutines with a prototype of C<($$)>, and XSUBs in general, can
+now be used as sort subroutines. In either case, the two elements to
+be compared are passed as normal parameters in @_. See L<perlfunc/sort>.
+
+For unprototyped sort subroutines, the historical behavior of passing
+the elements to be compared as the global variables $a and $b remains
+unchanged.
+
+=head2 C<sort $coderef @foo> allowed
+
+sort() did not accept a subroutine reference as the comparison
+function in earlier versions. This is now permitted.
+
+=head2 File globbing implemented internally
+
+Perl now uses the File::Glob implementation of the glob() operator
+automatically. This avoids using an external csh process and the
+problems associated with it.
+
+ NOTE: This is currently an experimental feature. Interfaces and
+ implementation are subject to change.
+
+=head2 Support for CHECK blocks
+
+In addition to C<BEGIN>, C<INIT>, C<END>, C<DESTROY> and C<AUTOLOAD>,
+subroutines named C<CHECK> are now special. These are queued up during
+compilation and behave similar to END blocks, except they are called at
+the end of compilation rather than at the end of execution. They cannot
+be called directly.
+
+=head2 POSIX character class syntax [: :] supported
+
+For example to match alphabetic characters use /[[:alpha:]]/.
+See L<perlre> for details.
+
+=head2 Better pseudo-random number generator
+
+In 5.005_0x and earlier, perl's rand() function used the C library
+rand(3) function. As of 5.005_52, Configure tests for drand48(),
+random(), and rand() (in that order) and picks the first one it finds.
+
+These changes should result in better random numbers from rand().
+
+=head2 Improved C<qw//> operator
+
+The C<qw//> operator is now evaluated at compile time into a true list
+instead of being replaced with a run time call to C<split()>. This
+removes the confusing misbehaviour of C<qw//> in scalar context, which
+had inherited that behaviour from split().
+
+Thus:
+
+ $foo = ($bar) = qw(a b c); print "$foo|$bar\n";
+
+now correctly prints "3|a", instead of "2|a".
+
+=head2 Better worst-case behavior of hashes
+
+Small changes in the hashing algorithm have been implemented in
+order to improve the distribution of lower order bits in the
+hashed value. This is expected to yield better performance on
+keys that are repeated sequences.
+
+=head2 pack() format 'Z' supported
+
+The new format type 'Z' is useful for packing and unpacking null-terminated
+strings. See L<perlfunc/"pack">.
+
+=head2 pack() format modifier '!' supported
+
+The new format type modifier '!' is useful for packing and unpacking
+native shorts, ints, and longs. See L<perlfunc/"pack">.
+
+=head2 pack() and unpack() support counted strings
+
+The template character '/' can be used to specify a counted string
+type to be packed or unpacked. See L<perlfunc/"pack">.
+
+=head2 Comments in pack() templates
+
+The '#' character in a template introduces a comment up to
+end of the line. This facilitates documentation of pack()
+templates.
+
+=head2 Weak references
+
+In previous versions of Perl, you couldn't cache objects so as
+to allow them to be deleted if the last reference from outside
+the cache is deleted. The reference in the cache would hold a
+reference count on the object and the objects would never be
+destroyed.
+
+Another familiar problem is with circular references. When an
+object references itself, its reference count would never go
+down to zero, and it would not get destroyed until the program
+is about to exit.
+
+Weak references solve this by allowing you to "weaken" any
+reference, that is, make it not count towards the reference count.
+When the last non-weak reference to an object is deleted, the object
+is destroyed and all the weak references to the object are
+automatically undef-ed.
+
+To use this feature, you need the WeakRef package from CPAN, which
+contains additional documentation.
+
+ NOTE: This is an experimental feature. Details are subject to change.
+
+=head2 Binary numbers supported
+
+Binary numbers are now supported as literals, in s?printf formats, and
+C<oct()>:
+
+ $answer = 0b101010;
+ printf "The answer is: %b\n", oct("0b101010");
+
+=head2 Lvalue subroutines
+
+Subroutines can now return modifiable lvalues.
+See L<perlsub/"Lvalue subroutines">.
+
+ NOTE: This is an experimental feature. Details are subject to change.
+
+=head2 Some arrows may be omitted in calls through references
+
+Perl now allows the arrow to be omitted in many constructs
+involving subroutine calls through references. For example,
+C<< $foo[10]->('foo') >> may now be written C<$foo[10]('foo')>.
+This is rather similar to how the arrow may be omitted from
+C<< $foo[10]->{'foo'} >>. Note however, that the arrow is still
+required for C<< foo(10)->('bar') >>.
+
+=head2 Boolean assignment operators are legal lvalues
+
+Constructs such as C<($a ||= 2) += 1> are now allowed.
+
+=head2 exists() is supported on subroutine names
+
+The exists() builtin now works on subroutine names. A subroutine
+is considered to exist if it has been declared (even if implicitly).
+See L<perlfunc/exists> for examples.
+
+=head2 exists() and delete() are supported on array elements
+
+The exists() and delete() builtins now work on simple arrays as well.
+The behavior is similar to that on hash elements.
+
+exists() can be used to check whether an array element has been
+initialized. This avoids autovivifying array elements that don't exist.
+If the array is tied, the EXISTS() method in the corresponding tied
+package will be invoked.
+
+delete() may be used to remove an element from the array and return
+it. The array element at that position returns to its uninitialized
+state, so that testing for the same element with exists() will return
+false. If the element happens to be the one at the end, the size of
+the array also shrinks up to the highest element that tests true for
+exists(), or 0 if none such is found. If the array is tied, the DELETE()
+method in the corresponding tied package will be invoked.
+
+See L<perlfunc/exists> and L<perlfunc/delete> for examples.
+
+=head2 Pseudo-hashes work better
+
+Dereferencing some types of reference values in a pseudo-hash,
+such as C<< $ph->{foo}[1] >>, was accidentally disallowed. This has
+been corrected.
+
+When applied to a pseudo-hash element, exists() now reports whether
+the specified value exists, not merely if the key is valid.
+
+delete() now works on pseudo-hashes. When given a pseudo-hash element
+or slice it deletes the values corresponding to the keys (but not the keys
+themselves). See L<perlref/"Pseudo-hashes: Using an array as a hash">.
+
+Pseudo-hash slices with constant keys are now optimized to array lookups
+at compile-time.
+
+List assignments to pseudo-hash slices are now supported.
+
+The C<fields> pragma now provides ways to create pseudo-hashes, via
+fields::new() and fields::phash(). See L<fields>.
+
+ NOTE: The pseudo-hash data type continues to be experimental.
+ Limiting oneself to the interface elements provided by the
+ fields pragma will provide protection from any future changes.
+
+=head2 Automatic flushing of output buffers
+
+fork(), exec(), system(), qx//, and pipe open()s now flush buffers
+of all files opened for output when the operation was attempted. This
+mostly eliminates confusing buffering mishaps suffered by users unaware
+of how Perl internally handles I/O.
+
+This is not supported on some platforms like Solaris where a suitably
+correct implementation of fflush(NULL) isn't available.
+
+=head2 Better diagnostics on meaningless filehandle operations
+
+Constructs such as C<< open(<FH>) >> and C<< close(<FH>) >>
+are compile time errors. Attempting to read from filehandles that
+were opened only for writing will now produce warnings (just as
+writing to read-only filehandles does).
+
+=head2 Where possible, buffered data discarded from duped input filehandle
+
+C<< open(NEW, "<&OLD") >> now attempts to discard any data that
+was previously read and buffered in C<OLD> before duping the handle.
+On platforms where doing this is allowed, the next read operation
+on C<NEW> will return the same data as the corresponding operation
+on C<OLD>. Formerly, it would have returned the data from the start
+of the following disk block instead.
+
+=head2 eof() has the same old magic as <>
+
+C<eof()> would return true if no attempt to read from C<< <> >> had
+yet been made. C<eof()> has been changed to have a little magic of its
+own, it now opens the C<< <> >> files.
+
+=head2 binmode() can be used to set :crlf and :raw modes
+
+binmode() now accepts a second argument that specifies a discipline
+for the handle in question. The two pseudo-disciplines ":raw" and
+":crlf" are currently supported on DOS-derivative platforms.
+See L<perlfunc/"binmode"> and L<open>.
+
+=head2 C<-T> filetest recognizes UTF-8 encoded files as "text"
+
+The algorithm used for the C<-T> filetest has been enhanced to
+correctly identify UTF-8 content as "text".
+
+=head2 system(), backticks and pipe open now reflect exec() failure
+
+On Unix and similar platforms, system(), qx() and open(FOO, "cmd |")
+etc., are implemented via fork() and exec(). When the underlying
+exec() fails, earlier versions did not report the error properly,
+since the exec() happened to be in a different process.
+
+The child process now communicates with the parent about the
+error in launching the external command, which allows these
+constructs to return with their usual error value and set $!.
+
+=head2 Improved diagnostics
+
+Line numbers are no longer suppressed (under most likely circumstances)
+during the global destruction phase.
+
+Diagnostics emitted from code running in threads other than the main
+thread are now accompanied by the thread ID.
+
+Embedded null characters in diagnostics now actually show up. They
+used to truncate the message in prior versions.
+
+$foo::a and $foo::b are now exempt from "possible typo" warnings only
+if sort() is encountered in package C<foo>.
+
+Unrecognized alphabetic escapes encountered when parsing quote
+constructs now generate a warning, since they may take on new
+semantics in later versions of Perl.
+
+Many diagnostics now report the internal operation in which the warning
+was provoked, like so:
+
+ Use of uninitialized value in concatenation (.) at (eval 1) line 1.
+ Use of uninitialized value in print at (eval 1) line 1.
+
+Diagnostics that occur within eval may also report the file and line
+number where the eval is located, in addition to the eval sequence
+number and the line number within the evaluated text itself. For
+example:
+
+ Not enough arguments for scalar at (eval 4)[newlib/perl5db.pl:1411] line 2, at EOF
+
+=head2 Diagnostics follow STDERR
+
+Diagnostic output now goes to whichever file the C<STDERR> handle
+is pointing at, instead of always going to the underlying C runtime
+library's C<stderr>.
+
+=head2 More consistent close-on-exec behavior
+
+On systems that support a close-on-exec flag on filehandles, the
+flag is now set for any handles created by pipe(), socketpair(),
+socket(), and accept(), if that is warranted by the value of $^F
+that may be in effect. Earlier versions neglected to set the flag
+for handles created with these operators. See L<perlfunc/pipe>,
+L<perlfunc/socketpair>, L<perlfunc/socket>, L<perlfunc/accept>,
+and L<perlvar/$^F>.
+
+=head2 syswrite() ease-of-use
+
+The length argument of C<syswrite()> has become optional.
+
+=head2 Better syntax checks on parenthesized unary operators
+
+Expressions such as:
+
+ print defined(&foo,&bar,&baz);
+ print uc("foo","bar","baz");
+ undef($foo,&bar);
+
+used to be accidentally allowed in earlier versions, and produced
+unpredictable behaviour. Some produced ancillary warnings
+when used in this way; others silently did the wrong thing.
+
+The parenthesized forms of most unary operators that expect a single
+argument now ensure that they are not called with more than one
+argument, making the cases shown above syntax errors. The usual
+behaviour of:
+
+ print defined &foo, &bar, &baz;
+ print uc "foo", "bar", "baz";
+ undef $foo, &bar;
+
+remains unchanged. See L<perlop>.
+
+=head2 Bit operators support full native integer width
+
+The bit operators (& | ^ ~ << >>) now operate on the full native
+integral width (the exact size of which is available in $Config{ivsize}).
+For example, if your platform is either natively 64-bit or if Perl
+has been configured to use 64-bit integers, these operations apply
+to 8 bytes (as opposed to 4 bytes on 32-bit platforms).
+For portability, be sure to mask off the excess bits in the result of
+unary C<~>, e.g., C<~$x & 0xffffffff>.
+
+=head2 Improved security features
+
+More potentially unsafe operations taint their results for improved
+security.
+
+The C<passwd> and C<shell> fields returned by the getpwent(), getpwnam(),
+and getpwuid() are now tainted, because the user can affect their own
+encrypted password and login shell.
+
+The variable modified by shmread(), and messages returned by msgrcv()
+(and its object-oriented interface IPC::SysV::Msg::rcv) are also tainted,
+because other untrusted processes can modify messages and shared memory
+segments for their own nefarious purposes.
+
+=head2 More functional bareword prototype (*)
+
+Bareword prototypes have been rationalized to enable them to be used
+to override builtins that accept barewords and interpret them in
+a special way, such as C<require> or C<do>.
+
+Arguments prototyped as C<*> will now be visible within the subroutine
+as either a simple scalar or as a reference to a typeglob.
+See L<perlsub/Prototypes>.
+
+=head2 C<require> and C<do> may be overridden
+
+C<require> and C<do 'file'> operations may be overridden locally
+by importing subroutines of the same name into the current package
+(or globally by importing them into the CORE::GLOBAL:: namespace).
+Overriding C<require> will also affect C<use>, provided the override
+is visible at compile-time.
+See L<perlsub/"Overriding Built-in Functions">.
+
+=head2 $^X variables may now have names longer than one character
+
+Formerly, $^X was synonymous with ${"\cX"}, but $^XY was a syntax
+error. Now variable names that begin with a control character may be
+arbitrarily long. However, for compatibility reasons, these variables
+I<must> be written with explicit braces, as C<${^XY}> for example.
+C<${^XYZ}> is synonymous with ${"\cXYZ"}. Variable names with more
+than one control character, such as C<${^XY^Z}>, are illegal.
+
+The old syntax has not changed. As before, `^X' may be either a
+literal control-X character or the two-character sequence `caret' plus
+`X'. When braces are omitted, the variable name stops after the
+control character. Thus C<"$^XYZ"> continues to be synonymous with
+C<$^X . "YZ"> as before.
+
+As before, lexical variables may not have names beginning with control
+characters. As before, variables whose names begin with a control
+character are always forced to be in package `main'. All such variables
+are reserved for future extensions, except those that begin with
+C<^_>, which may be used by user programs and are guaranteed not to
+acquire special meaning in any future version of Perl.
+
+=head2 New variable $^C reflects C<-c> switch
+
+C<$^C> has a boolean value that reflects whether perl is being run
+in compile-only mode (i.e. via the C<-c> switch). Since
+BEGIN blocks are executed under such conditions, this variable
+enables perl code to determine whether actions that make sense
+only during normal running are warranted. See L<perlvar>.
+
+=head2 New variable $^V contains Perl version as a string
+
+C<$^V> contains the Perl version number as a string composed of
+characters whose ordinals match the version numbers, i.e. v5.6.0.
+This may be used in string comparisons.
+
+See C<Support for strings represented as a vector of ordinals> for an
+example.
+
+=head2 Optional Y2K warnings
+
+If Perl is built with the cpp macro C<PERL_Y2KWARN> defined,
+it emits optional warnings when concatenating the number 19
+with another number.
+
+This behavior must be specifically enabled when running Configure.
+See F<INSTALL> and F<README.Y2K>.
+
+=head2 Arrays now always interpolate into double-quoted strings
+
+In double-quoted strings, arrays now interpolate, no matter what. The
+behavior in earlier versions of perl 5 was that arrays would interpolate
+into strings if the array had been mentioned before the string was
+compiled, and otherwise Perl would raise a fatal compile-time error.
+In versions 5.000 through 5.003, the error was
+
+ Literal @example now requires backslash
+
+In versions 5.004_01 through 5.6.0, the error was
+
+ In string, @example now must be written as \@example
+
+The idea here was to get people into the habit of writing
+C<"fred\@example.com"> when they wanted a literal C<@> sign, just as
+they have always written C<"Give me back my \$5"> when they wanted a
+literal C<$> sign.
+
+Starting with 5.6.1, when Perl now sees an C<@> sign in a
+double-quoted string, it I<always> attempts to interpolate an array,
+regardless of whether or not the array has been used or declared
+already. The fatal error has been downgraded to an optional warning:
+
+ Possible unintended interpolation of @example in string
+
+This warns you that C<"fred@example.com"> is going to turn into
+C<fred.com> if you don't backslash the C<@>.
+See http://www.plover.com/~mjd/perl/at-error.html for more details
+about the history here.
+
+=head1 Modules and Pragmata
+
+=head2 Modules
+
+=over 4
+
+=item attributes
+
+While used internally by Perl as a pragma, this module also
+provides a way to fetch subroutine and variable attributes.
+See L<attributes>.
+
+=item B
+
+The Perl Compiler suite has been extensively reworked for this
+release. More of the standard Perl testsuite passes when run
+under the Compiler, but there is still a significant way to
+go to achieve production quality compiled executables.
+
+ NOTE: The Compiler suite remains highly experimental. The
+ generated code may not be correct, even when it manages to execute
+ without errors.
+
+=item Benchmark
+
+Overall, Benchmark results exhibit lower average error and better timing
+accuracy.
+
+You can now run tests for I<n> seconds instead of guessing the right
+number of tests to run: e.g., timethese(-5, ...) will run each
+code for at least 5 CPU seconds. Zero as the "number of repetitions"
+means "for at least 3 CPU seconds". The output format has also
+changed. For example:
+
+ use Benchmark;$x=3;timethese(-5,{a=>sub{$x*$x},b=>sub{$x**2}})
+
+will now output something like this:
+
+ Benchmark: running a, b, each for at least 5 CPU seconds...
+ a: 5 wallclock secs ( 5.77 usr + 0.00 sys = 5.77 CPU) @ 200551.91/s (n=1156516)
+ b: 4 wallclock secs ( 5.00 usr + 0.02 sys = 5.02 CPU) @ 159605.18/s (n=800686)
+
+New features: "each for at least N CPU seconds...", "wallclock secs",
+and the "@ operations/CPU second (n=operations)".
+
+timethese() now returns a reference to a hash of Benchmark objects containing
+the test results, keyed on the names of the tests.
+
+timethis() now returns the iterations field in the Benchmark result object
+instead of 0.
+
+timethese(), timethis(), and the new cmpthese() (see below) can also take
+a format specifier of 'none' to suppress output.
+
+A new function countit() is just like timeit() except that it takes a
+TIME instead of a COUNT.
+
+A new function cmpthese() prints a chart comparing the results of each test
+returned from a timethese() call. For each possible pair of tests, the
+percentage speed difference (iters/sec or seconds/iter) is shown.
+
+For other details, see L<Benchmark>.
+
+=item ByteLoader
+
+The ByteLoader is a dedicated extension to generate and run
+Perl bytecode. See L<ByteLoader>.
+
+=item constant
+
+References can now be used.
+
+The new version also allows a leading underscore in constant names, but
+disallows a double leading underscore (as in "__LINE__"). Some other names
+are disallowed or warned against, including BEGIN, END, etc. Some names
+which were forced into main:: used to fail silently in some cases; now they're
+fatal (outside of main::) and an optional warning (inside of main::).
+The ability to detect whether a constant had been set with a given name has
+been added.
+
+See L<constant>.
+
+=item charnames
+
+This pragma implements the C<\N> string escape. See L<charnames>.
+
+=item Data::Dumper
+
+A C<Maxdepth> setting can be specified to avoid venturing
+too deeply into deep data structures. See L<Data::Dumper>.
+
+The XSUB implementation of Dump() is now automatically called if the
+C<Useqq> setting is not in use.
+
+Dumping C<qr//> objects works correctly.
+
+=item DB
+
+C<DB> is an experimental module that exposes a clean abstraction
+to Perl's debugging API.
+
+=item DB_File
+
+DB_File can now be built with Berkeley DB versions 1, 2 or 3.
+See C<ext/DB_File/Changes>.
+
+=item Devel::DProf
+
+Devel::DProf, a Perl source code profiler has been added. See
+L<Devel::DProf> and L<dprofpp>.
+
+=item Devel::Peek
+
+The Devel::Peek module provides access to the internal representation
+of Perl variables and data. It is a data debugging tool for the XS programmer.
+
+=item Dumpvalue
+
+The Dumpvalue module provides screen dumps of Perl data.
+
+=item DynaLoader
+
+DynaLoader now supports a dl_unload_file() function on platforms that
+support unloading shared objects using dlclose().
+
+Perl can also optionally arrange to unload all extension shared objects
+loaded by Perl. To enable this, build Perl with the Configure option
+C<-Accflags=-DDL_UNLOAD_ALL_AT_EXIT>. (This maybe useful if you are
+using Apache with mod_perl.)
+
+=item English
+
+$PERL_VERSION now stands for C<$^V> (a string value) rather than for C<$]>
+(a numeric value).
+
+=item Env
+
+Env now supports accessing environment variables like PATH as array
+variables.
+
+=item Fcntl
+
+More Fcntl constants added: F_SETLK64, F_SETLKW64, O_LARGEFILE for
+large file (more than 4GB) access (NOTE: the O_LARGEFILE is
+automatically added to sysopen() flags if large file support has been
+configured, as is the default), Free/Net/OpenBSD locking behaviour
+flags F_FLOCK, F_POSIX, Linux F_SHLCK, and O_ACCMODE: the combined
+mask of O_RDONLY, O_WRONLY, and O_RDWR. The seek()/sysseek()
+constants SEEK_SET, SEEK_CUR, and SEEK_END are available via the
+C<:seek> tag. The chmod()/stat() S_IF* constants and S_IS* functions
+are available via the C<:mode> tag.
+
+=item File::Compare
+
+A compare_text() function has been added, which allows custom
+comparison functions. See L<File::Compare>.
+
+=item File::Find
+
+File::Find now works correctly when the wanted() function is either
+autoloaded or is a symbolic reference.
+
+A bug that caused File::Find to lose track of the working directory
+when pruning top-level directories has been fixed.
+
+File::Find now also supports several other options to control its
+behavior. It can follow symbolic links if the C<follow> option is
+specified. Enabling the C<no_chdir> option will make File::Find skip
+changing the current directory when walking directories. The C<untaint>
+flag can be useful when running with taint checks enabled.
+
+See L<File::Find>.
+
+=item File::Glob
+
+This extension implements BSD-style file globbing. By default,
+it will also be used for the internal implementation of the glob()
+operator. See L<File::Glob>.
+
+=item File::Spec
+
+New methods have been added to the File::Spec module: devnull() returns
+the name of the null device (/dev/null on Unix) and tmpdir() the name of
+the temp directory (normally /tmp on Unix). There are now also methods
+to convert between absolute and relative filenames: abs2rel() and
+rel2abs(). For compatibility with operating systems that specify volume
+names in file paths, the splitpath(), splitdir(), and catdir() methods
+have been added.
+
+=item File::Spec::Functions
+
+The new File::Spec::Functions modules provides a function interface
+to the File::Spec module. Allows shorthand
+
+ $fullname = catfile($dir1, $dir2, $file);
+
+instead of
+
+ $fullname = File::Spec->catfile($dir1, $dir2, $file);
+
+=item Getopt::Long
+
+Getopt::Long licensing has changed to allow the Perl Artistic License
+as well as the GPL. It used to be GPL only, which got in the way of
+non-GPL applications that wanted to use Getopt::Long.
+
+Getopt::Long encourages the use of Pod::Usage to produce help
+messages. For example:
+
+ use Getopt::Long;
+ use Pod::Usage;
+ my $man = 0;
+ my $help = 0;
+ GetOptions('help|?' => \$help, man => \$man) or pod2usage(2);
+ pod2usage(1) if $help;
+ pod2usage(-exitstatus => 0, -verbose => 2) if $man;
+
+ __END__
+
+ =head1 NAME
+
+ sample - Using GetOpt::Long and Pod::Usage
+
+ =head1 SYNOPSIS
+
+ sample [options] [file ...]
+
+ Options:
+ -help brief help message
+ -man full documentation
+
+ =head1 OPTIONS
+
+ =over 8
+
+ =item B<-help>
+
+ Print a brief help message and exits.
+
+ =item B<-man>
+
+ Prints the manual page and exits.
+
+ =back
+
+ =head1 DESCRIPTION
+
+ B<This program> will read the given input file(s) and do something
+ useful with the contents thereof.
+
+ =cut
+
+See L<Pod::Usage> for details.
+
+A bug that prevented the non-option call-back <> from being
+specified as the first argument has been fixed.
+
+To specify the characters < and > as option starters, use ><. Note,
+however, that changing option starters is strongly deprecated.
+
+=item IO
+
+write() and syswrite() will now accept a single-argument
+form of the call, for consistency with Perl's syswrite().
+
+You can now create a TCP-based IO::Socket::INET without forcing
+a connect attempt. This allows you to configure its options
+(like making it non-blocking) and then call connect() manually.
+
+A bug that prevented the IO::Socket::protocol() accessor
+from ever returning the correct value has been corrected.
+
+IO::Socket::connect now uses non-blocking IO instead of alarm()
+to do connect timeouts.
+
+IO::Socket::accept now uses select() instead of alarm() for doing
+timeouts.
+
+IO::Socket::INET->new now sets $! correctly on failure. $@ is
+still set for backwards compatibility.
+
+=item JPL
+
+Java Perl Lingo is now distributed with Perl. See jpl/README
+for more information.
+
+=item lib
+
+C<use lib> now weeds out any trailing duplicate entries.
+C<no lib> removes all named entries.
+
+=item Math::BigInt
+
+The bitwise operations C<<< << >>>, C<<< >> >>>, C<&>, C<|>,
+and C<~> are now supported on bigints.
+
+=item Math::Complex
+
+The accessor methods Re, Im, arg, abs, rho, and theta can now also
+act as mutators (accessor $z->Re(), mutator $z->Re(3)).
+
+The class method C<display_format> and the corresponding object method
+C<display_format>, in addition to accepting just one argument, now can
+also accept a parameter hash. Recognized keys of a parameter hash are
+C<"style">, which corresponds to the old one parameter case, and two
+new parameters: C<"format">, which is a printf()-style format string
+(defaults usually to C<"%.15g">, you can revert to the default by
+setting the format string to C<undef>) used for both parts of a
+complex number, and C<"polar_pretty_print"> (defaults to true),
+which controls whether an attempt is made to try to recognize small
+multiples and rationals of pi (2pi, pi/2) at the argument (angle) of a
+polar complex number.
+
+The potentially disruptive change is that in list context both methods
+now I<return the parameter hash>, instead of only the value of the
+C<"style"> parameter.
+
+=item Math::Trig
+
+A little bit of radial trigonometry (cylindrical and spherical),
+radial coordinate conversions, and the great circle distance were added.
+
+=item Pod::Parser, Pod::InputObjects
+
+Pod::Parser is a base class for parsing and selecting sections of
+pod documentation from an input stream. This module takes care of
+identifying pod paragraphs and commands in the input and hands off the
+parsed paragraphs and commands to user-defined methods which are free
+to interpret or translate them as they see fit.
+
+Pod::InputObjects defines some input objects needed by Pod::Parser, and
+for advanced users of Pod::Parser that need more about a command besides
+its name and text.
+
+As of release 5.6.0 of Perl, Pod::Parser is now the officially sanctioned
+"base parser code" recommended for use by all pod2xxx translators.
+Pod::Text (pod2text) and Pod::Man (pod2man) have already been converted
+to use Pod::Parser and efforts to convert Pod::HTML (pod2html) are already
+underway. For any questions or comments about pod parsing and translating
+issues and utilities, please use the pod-people@perl.org mailing list.
+
+For further information, please see L<Pod::Parser> and L<Pod::InputObjects>.
+
+=item Pod::Checker, podchecker
+
+This utility checks pod files for correct syntax, according to
+L<perlpod>. Obvious errors are flagged as such, while warnings are
+printed for mistakes that can be handled gracefully. The checklist is
+not complete yet. See L<Pod::Checker>.
+
+=item Pod::ParseUtils, Pod::Find
+
+These modules provide a set of gizmos that are useful mainly for pod
+translators. L<Pod::Find|Pod::Find> traverses directory structures and
+returns found pod files, along with their canonical names (like
+C<File::Spec::Unix>). L<Pod::ParseUtils|Pod::ParseUtils> contains
+B<Pod::List> (useful for storing pod list information), B<Pod::Hyperlink>
+(for parsing the contents of C<LE<lt>E<gt>> sequences) and B<Pod::Cache>
+(for caching information about pod files, e.g., link nodes).
+
+=item Pod::Select, podselect
+
+Pod::Select is a subclass of Pod::Parser which provides a function
+named "podselect()" to filter out user-specified sections of raw pod
+documentation from an input stream. podselect is a script that provides
+access to Pod::Select from other scripts to be used as a filter.
+See L<Pod::Select>.
+
+=item Pod::Usage, pod2usage
+
+Pod::Usage provides the function "pod2usage()" to print usage messages for
+a Perl script based on its embedded pod documentation. The pod2usage()
+function is generally useful to all script authors since it lets them
+write and maintain a single source (the pods) for documentation, thus
+removing the need to create and maintain redundant usage message text
+consisting of information already in the pods.
+
+There is also a pod2usage script which can be used from other kinds of
+scripts to print usage messages from pods (even for non-Perl scripts
+with pods embedded in comments).
+
+For details and examples, please see L<Pod::Usage>.
+
+=item Pod::Text and Pod::Man
+
+Pod::Text has been rewritten to use Pod::Parser. While pod2text() is
+still available for backwards compatibility, the module now has a new
+preferred interface. See L<Pod::Text> for the details. The new Pod::Text
+module is easily subclassed for tweaks to the output, and two such
+subclasses (Pod::Text::Termcap for man-page-style bold and underlining
+using termcap information, and Pod::Text::Color for markup with ANSI color
+sequences) are now standard.
+
+pod2man has been turned into a module, Pod::Man, which also uses
+Pod::Parser. In the process, several outstanding bugs related to quotes
+in section headers, quoting of code escapes, and nested lists have been
+fixed. pod2man is now a wrapper script around this module.
+
+=item SDBM_File
+
+An EXISTS method has been added to this module (and sdbm_exists() has
+been added to the underlying sdbm library), so one can now call exists
+on an SDBM_File tied hash and get the correct result, rather than a
+runtime error.
+
+A bug that may have caused data loss when more than one disk block
+happens to be read from the database in a single FETCH() has been
+fixed.
+
+=item Sys::Syslog
+
+Sys::Syslog now uses XSUBs to access facilities from syslog.h so it
+no longer requires syslog.ph to exist.
+
+=item Sys::Hostname
+
+Sys::Hostname now uses XSUBs to call the C library's gethostname() or
+uname() if they exist.
+
+=item Term::ANSIColor
+
+Term::ANSIColor is a very simple module to provide easy and readable
+access to the ANSI color and highlighting escape sequences, supported by
+most ANSI terminal emulators. It is now included standard.
+
+=item Time::Local
+
+The timelocal() and timegm() functions used to silently return bogus
+results when the date fell outside the machine's integer range. They
+now consistently croak() if the date falls in an unsupported range.
+
+=item Win32
+
+The error return value in list context has been changed for all functions
+that return a list of values. Previously these functions returned a list
+with a single element C<undef> if an error occurred. Now these functions
+return the empty list in these situations. This applies to the following
+functions:
+
+ Win32::FsType
+ Win32::GetOSVersion
+
+The remaining functions are unchanged and continue to return C<undef> on
+error even in list context.
+
+The Win32::SetLastError(ERROR) function has been added as a complement
+to the Win32::GetLastError() function.
+
+The new Win32::GetFullPathName(FILENAME) returns the full absolute
+pathname for FILENAME in scalar context. In list context it returns
+a two-element list containing the fully qualified directory name and
+the filename. See L<Win32>.
+
+=item XSLoader
+
+The XSLoader extension is a simpler alternative to DynaLoader.
+See L<XSLoader>.
+
+=item DBM Filters
+
+A new feature called "DBM Filters" has been added to all the
+DBM modules--DB_File, GDBM_File, NDBM_File, ODBM_File, and SDBM_File.
+DBM Filters add four new methods to each DBM module:
+
+ filter_store_key
+ filter_store_value
+ filter_fetch_key
+ filter_fetch_value
+
+These can be used to filter key-value pairs before the pairs are
+written to the database or just after they are read from the database.
+See L<perldbmfilter> for further information.
+
+=back
+
+=head2 Pragmata
+
+C<use attrs> is now obsolete, and is only provided for
+backward-compatibility. It's been replaced by the C<sub : attributes>
+syntax. See L<perlsub/"Subroutine Attributes"> and L<attributes>.
+
+Lexical warnings pragma, C<use warnings;>, to control optional warnings.
+See L<perllexwarn>.
+
+C<use filetest> to control the behaviour of filetests (C<-r> C<-w>
+...). Currently only one subpragma implemented, "use filetest
+'access';", that uses access(2) or equivalent to check permissions
+instead of using stat(2) as usual. This matters in filesystems
+where there are ACLs (access control lists): the stat(2) might lie,
+but access(2) knows better.
+
+The C<open> pragma can be used to specify default disciplines for
+handle constructors (e.g. open()) and for qx//. The two
+pseudo-disciplines C<:raw> and C<:crlf> are currently supported on
+DOS-derivative platforms (i.e. where binmode is not a no-op).
+See also L</"binmode() can be used to set :crlf and :raw modes">.
+
+=head1 Utility Changes
+
+=head2 dprofpp
+
+C<dprofpp> is used to display profile data generated using C<Devel::DProf>.
+See L<dprofpp>.
+
+=head2 find2perl
+
+The C<find2perl> utility now uses the enhanced features of the File::Find
+module. The -depth and -follow options are supported. Pod documentation
+is also included in the script.
+
+=head2 h2xs
+
+The C<h2xs> tool can now work in conjunction with C<C::Scan> (available
+from CPAN) to automatically parse real-life header files. The C<-M>,
+C<-a>, C<-k>, and C<-o> options are new.
+
+=head2 perlcc
+
+C<perlcc> now supports the C and Bytecode backends. By default,
+it generates output from the simple C backend rather than the
+optimized C backend.
+
+Support for non-Unix platforms has been improved.
+
+=head2 perldoc
+
+C<perldoc> has been reworked to avoid possible security holes.
+It will not by default let itself be run as the superuser, but you
+may still use the B<-U> switch to try to make it drop privileges
+first.
+
+=head2 The Perl Debugger
+
+Many bug fixes and enhancements were added to F<perl5db.pl>, the
+Perl debugger. The help documentation was rearranged. New commands
+include C<< < ? >>, C<< > ? >>, and C<< { ? >> to list out current
+actions, C<man I<docpage>> to run your doc viewer on some perl
+docset, and support for quoted options. The help information was
+rearranged, and should be viewable once again if you're using B<less>
+as your pager. A serious security hole was plugged--you should
+immediately remove all older versions of the Perl debugger as
+installed in previous releases, all the way back to perl3, from
+your system to avoid being bitten by this.
+
+=head1 Improved Documentation
+
+Many of the platform-specific README files are now part of the perl
+installation. See L<perl> for the complete list.
+
+=over 4
+
+=item perlapi.pod
+
+The official list of public Perl API functions.
+
+=item perlboot.pod
+
+A tutorial for beginners on object-oriented Perl.
+
+=item perlcompile.pod
+
+An introduction to using the Perl Compiler suite.
+
+=item perldbmfilter.pod
+
+A howto document on using the DBM filter facility.
+
+=item perldebug.pod
+
+All material unrelated to running the Perl debugger, plus all
+low-level guts-like details that risked crushing the casual user
+of the debugger, have been relocated from the old manpage to the
+next entry below.
+
+=item perldebguts.pod
+
+This new manpage contains excessively low-level material not related
+to the Perl debugger, but slightly related to debugging Perl itself.
+It also contains some arcane internal details of how the debugging
+process works that may only be of interest to developers of Perl
+debuggers.
+
+=item perlfork.pod
+
+Notes on the fork() emulation currently available for the Windows platform.
+
+=item perlfilter.pod
+
+An introduction to writing Perl source filters.
+
+=item perlhack.pod
+
+Some guidelines for hacking the Perl source code.
+
+=item perlintern.pod
+
+A list of internal functions in the Perl source code.
+(List is currently empty.)
+
+=item perllexwarn.pod
+
+Introduction and reference information about lexically scoped
+warning categories.
+
+=item perlnumber.pod
+
+Detailed information about numbers as they are represented in Perl.
+
+=item perlopentut.pod
+
+A tutorial on using open() effectively.
+
+=item perlreftut.pod
+
+A tutorial that introduces the essentials of references.
+
+=item perltootc.pod
+
+A tutorial on managing class data for object modules.
+
+=item perltodo.pod
+
+Discussion of the most often wanted features that may someday be
+supported in Perl.
+
+=item perlunicode.pod
+
+An introduction to Unicode support features in Perl.
+
+=back
+
+=head1 Performance enhancements
+
+=head2 Simple sort() using { $a <=> $b } and the like are optimized
+
+Many common sort() operations using a simple inlined block are now
+optimized for faster performance.
+
+=head2 Optimized assignments to lexical variables
+
+Certain operations in the RHS of assignment statements have been
+optimized to directly set the lexical variable on the LHS,
+eliminating redundant copying overheads.
+
+=head2 Faster subroutine calls
+
+Minor changes in how subroutine calls are handled internally
+provide marginal improvements in performance.
+
+=head2 delete(), each(), values() and hash iteration are faster
+
+The hash values returned by delete(), each(), values() and hashes in a
+list context are the actual values in the hash, instead of copies.
+This results in significantly better performance, because it eliminates
+needless copying in most situations.
+
+=head1 Installation and Configuration Improvements
+
+=head2 -Dusethreads means something different
+
+The -Dusethreads flag now enables the experimental interpreter-based thread
+support by default. To get the flavor of experimental threads that was in
+5.005 instead, you need to run Configure with "-Dusethreads -Duse5005threads".
+
+As of v5.6.0, interpreter-threads support is still lacking a way to
+create new threads from Perl (i.e., C<use Thread;> will not work with
+interpreter threads). C<use Thread;> continues to be available when you
+specify the -Duse5005threads option to Configure, bugs and all.
+
+ NOTE: Support for threads continues to be an experimental feature.
+ Interfaces and implementation are subject to sudden and drastic changes.
+
+=head2 New Configure flags
+
+The following new flags may be enabled on the Configure command line
+by running Configure with C<-Dflag>.
+
+ usemultiplicity
+ usethreads useithreads (new interpreter threads: no Perl API yet)
+ usethreads use5005threads (threads as they were in 5.005)
+
+ use64bitint (equal to now deprecated 'use64bits')
+ use64bitall
+
+ uselongdouble
+ usemorebits
+ uselargefiles
+ usesocks (only SOCKS v5 supported)
+
+=head2 Threadedness and 64-bitness now more daring
+
+The Configure options enabling the use of threads and the use of
+64-bitness are now more daring in the sense that they no more have an
+explicit list of operating systems of known threads/64-bit
+capabilities. In other words: if your operating system has the
+necessary APIs and datatypes, you should be able just to go ahead and
+use them, for threads by Configure -Dusethreads, and for 64 bits
+either explicitly by Configure -Duse64bitint or implicitly if your
+system has 64-bit wide datatypes. See also L<"64-bit support">.
+
+=head2 Long Doubles
+
+Some platforms have "long doubles", floating point numbers of even
+larger range than ordinary "doubles". To enable using long doubles for
+Perl's scalars, use -Duselongdouble.
+
+=head2 -Dusemorebits
+
+You can enable both -Duse64bitint and -Duselongdouble with -Dusemorebits.
+See also L<"64-bit support">.
+
+=head2 -Duselargefiles
+
+Some platforms support system APIs that are capable of handling large files
+(typically, files larger than two gigabytes). Perl will try to use these
+APIs if you ask for -Duselargefiles.
+
+See L<"Large file support"> for more information.
+
+=head2 installusrbinperl
+
+You can use "Configure -Uinstallusrbinperl" which causes installperl
+to skip installing perl also as /usr/bin/perl. This is useful if you
+prefer not to modify /usr/bin for some reason or another but harmful
+because many scripts assume to find Perl in /usr/bin/perl.
+
+=head2 SOCKS support
+
+You can use "Configure -Dusesocks" which causes Perl to probe
+for the SOCKS proxy protocol library (v5, not v4). For more information
+on SOCKS, see:
+
+ http://www.socks.nec.com/
+
+=head2 C<-A> flag
+
+You can "post-edit" the Configure variables using the Configure C<-A>
+switch. The editing happens immediately after the platform specific
+hints files have been processed but before the actual configuration
+process starts. Run C<Configure -h> to find out the full C<-A> syntax.
+
+=head2 Enhanced Installation Directories
+
+The installation structure has been enriched to improve the support
+for maintaining multiple versions of perl, to provide locations for
+vendor-supplied modules, scripts, and manpages, and to ease maintenance
+of locally-added modules, scripts, and manpages. See the section on
+Installation Directories in the INSTALL file for complete details.
+For most users building and installing from source, the defaults should
+be fine.
+
+If you previously used C<Configure -Dsitelib> or C<-Dsitearch> to set
+special values for library directories, you might wish to consider using
+the new C<-Dsiteprefix> setting instead. Also, if you wish to re-use a
+config.sh file from an earlier version of perl, you should be sure to
+check that Configure makes sensible choices for the new directories.
+See INSTALL for complete details.
+
+=head2 gcc automatically tried if 'cc' does not seem to be working
+
+In many platforms the vendor-supplied 'cc' is too stripped-down to
+build Perl (basically, the 'cc' doesn't do ANSI C). If this seems
+to be the case and the 'cc' does not seem to be the GNU C compiler
+'gcc', an automatic attempt is made to find and use 'gcc' instead.
+
+=head1 Platform specific changes
+
+=head2 Supported platforms
+
+=over 4
+
+=item *
+
+The Mach CThreads (NEXTSTEP, OPENSTEP) are now supported by the Thread
+extension.
+
+=item *
+
+GNU/Hurd is now supported.
+
+=item *
+
+Rhapsody/Darwin is now supported.
+
+=item *
+
+EPOC is now supported (on Psion 5).
+
+=item *
+
+The cygwin port (formerly cygwin32) has been greatly improved.
+
+=back
+
+=head2 DOS
+
+=over 4
+
+=item *
+
+Perl now works with djgpp 2.02 (and 2.03 alpha).
+
+=item *
+
+Environment variable names are not converted to uppercase any more.
+
+=item *
+
+Incorrect exit codes from backticks have been fixed.
+
+=item *
+
+This port continues to use its own builtin globbing (not File::Glob).
+
+=back
+
+=head2 OS390 (OpenEdition MVS)
+
+Support for this EBCDIC platform has not been renewed in this release.
+There are difficulties in reconciling Perl's standardization on UTF-8
+as its internal representation for characters with the EBCDIC character
+set, because the two are incompatible.
+
+It is unclear whether future versions will renew support for this
+platform, but the possibility exists.
+
+=head2 VMS
+
+Numerous revisions and extensions to configuration, build, testing, and
+installation process to accommodate core changes and VMS-specific options.
+
+Expand %ENV-handling code to allow runtime mapping to logical names,
+CLI symbols, and CRTL environ array.
+
+Extension of subprocess invocation code to accept filespecs as command
+"verbs".
+
+Add to Perl command line processing the ability to use default file types and
+to recognize Unix-style C<2E<gt>&1>.
+
+Expansion of File::Spec::VMS routines, and integration into ExtUtils::MM_VMS.
+
+Extension of ExtUtils::MM_VMS to handle complex extensions more flexibly.
+
+Barewords at start of Unix-syntax paths may be treated as text rather than
+only as logical names.
+
+Optional secure translation of several logical names used internally by Perl.
+
+Miscellaneous bugfixing and porting of new core code to VMS.
+
+Thanks are gladly extended to the many people who have contributed VMS
+patches, testing, and ideas.
+
+=head2 Win32
+
+Perl can now emulate fork() internally, using multiple interpreters running
+in different concurrent threads. This support must be enabled at build
+time. See L<perlfork> for detailed information.
+
+When given a pathname that consists only of a drivename, such as C<A:>,
+opendir() and stat() now use the current working directory for the drive
+rather than the drive root.
+
+The builtin XSUB functions in the Win32:: namespace are documented. See
+L<Win32>.
+
+$^X now contains the full path name of the running executable.
+
+A Win32::GetLongPathName() function is provided to complement
+Win32::GetFullPathName() and Win32::GetShortPathName(). See L<Win32>.
+
+POSIX::uname() is supported.
+
+system(1,...) now returns true process IDs rather than process
+handles. kill() accepts any real process id, rather than strictly
+return values from system(1,...).
+
+For better compatibility with Unix, C<kill(0, $pid)> can now be used to
+test whether a process exists.
+
+The C<Shell> module is supported.
+
+Better support for building Perl under command.com in Windows 95
+has been added.
+
+Scripts are read in binary mode by default to allow ByteLoader (and
+the filter mechanism in general) to work properly. For compatibility,
+the DATA filehandle will be set to text mode if a carriage return is
+detected at the end of the line containing the __END__ or __DATA__
+token; if not, the DATA filehandle will be left open in binary mode.
+Earlier versions always opened the DATA filehandle in text mode.
+
+The glob() operator is implemented via the C<File::Glob> extension,
+which supports glob syntax of the C shell. This increases the flexibility
+of the glob() operator, but there may be compatibility issues for
+programs that relied on the older globbing syntax. If you want to
+preserve compatibility with the older syntax, you might want to run
+perl with C<-MFile::DosGlob>. For details and compatibility information,
+see L<File::Glob>.
+
+=head1 Significant bug fixes
+
+=head2 <HANDLE> on empty files
+
+With C<$/> set to C<undef>, "slurping" an empty file returns a string of
+zero length (instead of C<undef>, as it used to) the first time the
+HANDLE is read after C<$/> is set to C<undef>. Further reads yield
+C<undef>.
+
+This means that the following will append "foo" to an empty file (it used
+to do nothing):
+
+ perl -0777 -pi -e 's/^/foo/' empty_file
+
+The behaviour of:
+
+ perl -pi -e 's/^/foo/' empty_file
+
+is unchanged (it continues to leave the file empty).
+
+=head2 C<eval '...'> improvements
+
+Line numbers (as reflected by caller() and most diagnostics) within
+C<eval '...'> were often incorrect where here documents were involved.
+This has been corrected.
+
+Lexical lookups for variables appearing in C<eval '...'> within
+functions that were themselves called within an C<eval '...'> were
+searching the wrong place for lexicals. The lexical search now
+correctly ends at the subroutine's block boundary.
+
+The use of C<return> within C<eval {...}> caused $@ not to be reset
+correctly when no exception occurred within the eval. This has
+been fixed.
+
+Parsing of here documents used to be flawed when they appeared as
+the replacement expression in C<eval 's/.../.../e'>. This has
+been fixed.
+
+=head2 All compilation errors are true errors
+
+Some "errors" encountered at compile time were by necessity
+generated as warnings followed by eventual termination of the
+program. This enabled more such errors to be reported in a
+single run, rather than causing a hard stop at the first error
+that was encountered.
+
+The mechanism for reporting such errors has been reimplemented
+to queue compile-time errors and report them at the end of the
+compilation as true errors rather than as warnings. This fixes
+cases where error messages leaked through in the form of warnings
+when code was compiled at run time using C<eval STRING>, and
+also allows such errors to be reliably trapped using C<eval "...">.
+
+=head2 Implicitly closed filehandles are safer
+
+Sometimes implicitly closed filehandles (as when they are localized,
+and Perl automatically closes them on exiting the scope) could
+inadvertently set $? or $!. This has been corrected.
+
+
+=head2 Behavior of list slices is more consistent
+
+When taking a slice of a literal list (as opposed to a slice of
+an array or hash), Perl used to return an empty list if the
+result happened to be composed of all undef values.
+
+The new behavior is to produce an empty list if (and only if)
+the original list was empty. Consider the following example:
+
+ @a = (1,undef,undef,2)[2,1,2];
+
+The old behavior would have resulted in @a having no elements.
+The new behavior ensures it has three undefined elements.
+
+Note in particular that the behavior of slices of the following
+cases remains unchanged:
+
+ @a = ()[1,2];
+ @a = (getpwent)[7,0];
+ @a = (anything_returning_empty_list())[2,1,2];
+ @a = @b[2,1,2];
+ @a = @c{'a','b','c'};
+
+See L<perldata>.
+
+=head2 C<(\$)> prototype and C<$foo{a}>
+
+A scalar reference prototype now correctly allows a hash or
+array element in that slot.
+
+=head2 C<goto &sub> and AUTOLOAD
+
+The C<goto &sub> construct works correctly when C<&sub> happens
+to be autoloaded.
+
+=head2 C<-bareword> allowed under C<use integer>
+
+The autoquoting of barewords preceded by C<-> did not work
+in prior versions when the C<integer> pragma was enabled.
+This has been fixed.
+
+=head2 Failures in DESTROY()
+
+When code in a destructor threw an exception, it went unnoticed
+in earlier versions of Perl, unless someone happened to be
+looking in $@ just after the point the destructor happened to
+run. Such failures are now visible as warnings when warnings are
+enabled.
+
+=head2 Locale bugs fixed
+
+printf() and sprintf() previously reset the numeric locale
+back to the default "C" locale. This has been fixed.
+
+Numbers formatted according to the local numeric locale
+(such as using a decimal comma instead of a decimal dot) caused
+"isn't numeric" warnings, even while the operations accessing
+those numbers produced correct results. These warnings have been
+discontinued.
+
+=head2 Memory leaks
+
+The C<eval 'return sub {...}'> construct could sometimes leak
+memory. This has been fixed.
+
+Operations that aren't filehandle constructors used to leak memory
+when used on invalid filehandles. This has been fixed.
+
+Constructs that modified C<@_> could fail to deallocate values
+in C<@_> and thus leak memory. This has been corrected.
+
+=head2 Spurious subroutine stubs after failed subroutine calls
+
+Perl could sometimes create empty subroutine stubs when a
+subroutine was not found in the package. Such cases stopped
+later method lookups from progressing into base packages.
+This has been corrected.
+
+=head2 Taint failures under C<-U>
+
+When running in unsafe mode, taint violations could sometimes
+cause silent failures. This has been fixed.
+
+=head2 END blocks and the C<-c> switch
+
+Prior versions used to run BEGIN B<and> END blocks when Perl was
+run in compile-only mode. Since this is typically not the expected
+behavior, END blocks are not executed anymore when the C<-c> switch
+is used, or if compilation fails.
+
+See L</"Support for CHECK blocks"> for how to run things when the compile
+phase ends.
+
+=head2 Potential to leak DATA filehandles
+
+Using the C<__DATA__> token creates an implicit filehandle to
+the file that contains the token. It is the program's
+responsibility to close it when it is done reading from it.
+
+This caveat is now better explained in the documentation.
+See L<perldata>.
+
+=head1 New or Changed Diagnostics
+
+=over 4
+
+=item "%s" variable %s masks earlier declaration in same %s
+
+(W misc) A "my" or "our" variable has been redeclared in the current scope or statement,
+effectively eliminating all access to the previous instance. This is almost
+always a typographical error. Note that the earlier variable will still exist
+until the end of the scope or until all closure referents to it are
+destroyed.
+
+=item "my sub" not yet implemented
+
+(F) Lexically scoped subroutines are not yet implemented. Don't try that
+yet.
+
+=item "our" variable %s redeclared
+
+(W misc) You seem to have already declared the same global once before in the
+current lexical scope.
+
+=item '!' allowed only after types %s
+
+(F) The '!' is allowed in pack() and unpack() only after certain types.
+See L<perlfunc/pack>.
+
+=item / cannot take a count
+
+(F) You had an unpack template indicating a counted-length string,
+but you have also specified an explicit size for the string.
+See L<perlfunc/pack>.
+
+=item / must be followed by a, A or Z
+
+(F) You had an unpack template indicating a counted-length string,
+which must be followed by one of the letters a, A or Z
+to indicate what sort of string is to be unpacked.
+See L<perlfunc/pack>.
+
+=item / must be followed by a*, A* or Z*
+
+(F) You had a pack template indicating a counted-length string,
+Currently the only things that can have their length counted are a*, A* or Z*.
+See L<perlfunc/pack>.
+
+=item / must follow a numeric type
+
+(F) You had an unpack template that contained a '#',
+but this did not follow some numeric unpack specification.
+See L<perlfunc/pack>.
+
+=item /%s/: Unrecognized escape \\%c passed through
+
+(W regexp) You used a backslash-character combination which is not recognized
+by Perl. This combination appears in an interpolated variable or a
+C<'>-delimited regular expression. The character was understood literally.
+
+=item /%s/: Unrecognized escape \\%c in character class passed through
+
+(W regexp) You used a backslash-character combination which is not recognized
+by Perl inside character classes. The character was understood literally.
+
+=item /%s/ should probably be written as "%s"
+
+(W syntax) You have used a pattern where Perl expected to find a string,
+as in the first argument to C<join>. Perl will treat the true
+or false result of matching the pattern against $_ as the string,
+which is probably not what you had in mind.
+
+=item %s() called too early to check prototype
+
+(W prototype) You've called a function that has a prototype before the parser saw a
+definition or declaration for it, and Perl could not check that the call
+conforms to the prototype. You need to either add an early prototype
+declaration for the subroutine in question, or move the subroutine
+definition ahead of the call to get proper prototype checking. Alternatively,
+if you are certain that you're calling the function correctly, you may put
+an ampersand before the name to avoid the warning. See L<perlsub>.
+
+=item %s argument is not a HASH or ARRAY element
+
+(F) The argument to exists() must be a hash or array element, such as:
+
+ $foo{$bar}
+ $ref->{"susie"}[12]
+
+=item %s argument is not a HASH or ARRAY element or slice
+
+(F) The argument to delete() must be either a hash or array element, such as:
+
+ $foo{$bar}
+ $ref->{"susie"}[12]
+
+or a hash or array slice, such as:
+
+ @foo[$bar, $baz, $xyzzy]
+ @{$ref->[12]}{"susie", "queue"}
+
+=item %s argument is not a subroutine name
+
+(F) The argument to exists() for C<exists &sub> must be a subroutine
+name, and not a subroutine call. C<exists &sub()> will generate this error.
+
+=item %s package attribute may clash with future reserved word: %s
+
+(W reserved) A lowercase attribute name was used that had a package-specific handler.
+That name might have a meaning to Perl itself some day, even though it
+doesn't yet. Perhaps you should use a mixed-case attribute name, instead.
+See L<attributes>.
+
+=item (in cleanup) %s
+
+(W misc) This prefix usually indicates that a DESTROY() method raised
+the indicated exception. Since destructors are usually called by
+the system at arbitrary points during execution, and often a vast
+number of times, the warning is issued only once for any number
+of failures that would otherwise result in the same message being
+repeated.
+
+Failure of user callbacks dispatched using the C<G_KEEPERR> flag
+could also result in this warning. See L<perlcall/G_KEEPERR>.
+
+=item <> should be quotes
+
+(F) You wrote C<< require <file> >> when you should have written
+C<require 'file'>.
+
+=item Attempt to join self
+
+(F) You tried to join a thread from within itself, which is an
+impossible task. You may be joining the wrong thread, or you may
+need to move the join() to some other thread.
+
+=item Bad evalled substitution pattern
+
+(F) You've used the /e switch to evaluate the replacement for a
+substitution, but perl found a syntax error in the code to evaluate,
+most likely an unexpected right brace '}'.
+
+=item Bad realloc() ignored
+
+(S) An internal routine called realloc() on something that had never been
+malloc()ed in the first place. Mandatory, but can be disabled by
+setting environment variable C<PERL_BADFREE> to 1.
+
+=item Bareword found in conditional
+
+(W bareword) The compiler found a bareword where it expected a conditional,
+which often indicates that an || or && was parsed as part of the
+last argument of the previous construct, for example:
+
+ open FOO || die;
+
+It may also indicate a misspelled constant that has been interpreted
+as a bareword:
+
+ use constant TYPO => 1;
+ if (TYOP) { print "foo" }
+
+The C<strict> pragma is useful in avoiding such errors.
+
+=item Binary number > 0b11111111111111111111111111111111 non-portable
+
+(W portable) The binary number you specified is larger than 2**32-1
+(4294967295) and therefore non-portable between systems. See
+L<perlport> for more on portability concerns.
+
+=item Bit vector size > 32 non-portable
+
+(W portable) Using bit vector sizes larger than 32 is non-portable.
+
+=item Buffer overflow in prime_env_iter: %s
+
+(W internal) A warning peculiar to VMS. While Perl was preparing to iterate over
+%ENV, it encountered a logical name or symbol definition which was too long,
+so it was truncated to the string shown.
+
+=item Can't check filesystem of script "%s"
+
+(P) For some reason you can't check the filesystem of the script for nosuid.
+
+=item Can't declare class for non-scalar %s in "%s"
+
+(S) Currently, only scalar variables can declared with a specific class
+qualifier in a "my" or "our" declaration. The semantics may be extended
+for other types of variables in future.
+
+=item Can't declare %s in "%s"
+
+(F) Only scalar, array, and hash variables may be declared as "my" or
+"our" variables. They must have ordinary identifiers as names.
+
+=item Can't ignore signal CHLD, forcing to default
+
+(W signal) Perl has detected that it is being run with the SIGCHLD signal
+(sometimes known as SIGCLD) disabled. Since disabling this signal
+will interfere with proper determination of exit status of child
+processes, Perl has reset the signal to its default value.
+This situation typically indicates that the parent program under
+which Perl may be running (e.g., cron) is being very careless.
+
+=item Can't modify non-lvalue subroutine call
+
+(F) Subroutines meant to be used in lvalue context should be declared as
+such, see L<perlsub/"Lvalue subroutines">.
+
+=item Can't read CRTL environ
+
+(S) A warning peculiar to VMS. Perl tried to read an element of %ENV
+from the CRTL's internal environment array and discovered the array was
+missing. You need to figure out where your CRTL misplaced its environ
+or define F<PERL_ENV_TABLES> (see L<perlvms>) so that environ is not searched.
+
+=item Can't remove %s: %s, skipping file
+
+(S) You requested an inplace edit without creating a backup file. Perl
+was unable to remove the original file to replace it with the modified
+file. The file was left unmodified.
+
+=item Can't return %s from lvalue subroutine
+
+(F) Perl detected an attempt to return illegal lvalues (such
+as temporary or readonly values) from a subroutine used as an lvalue.
+This is not allowed.
+
+=item Can't weaken a nonreference
+
+(F) You attempted to weaken something that was not a reference. Only
+references can be weakened.
+
+=item Character class [:%s:] unknown
+
+(F) The class in the character class [: :] syntax is unknown.
+See L<perlre>.
+
+=item Character class syntax [%s] belongs inside character classes
+
+(W unsafe) The character class constructs [: :], [= =], and [. .] go
+I<inside> character classes, the [] are part of the construct,
+for example: /[012[:alpha:]345]/. Note that [= =] and [. .]
+are not currently implemented; they are simply placeholders for
+future extensions.
+
+=item Constant is not %s reference
+
+(F) A constant value (perhaps declared using the C<use constant> pragma)
+is being dereferenced, but it amounts to the wrong type of reference. The
+message indicates the type of reference that was expected. This usually
+indicates a syntax error in dereferencing the constant value.
+See L<perlsub/"Constant Functions"> and L<constant>.
+
+=item constant(%s): %s
+
+(F) The parser found inconsistencies either while attempting to define an
+overloaded constant, or when trying to find the character name specified
+in the C<\N{...}> escape. Perhaps you forgot to load the corresponding
+C<overload> or C<charnames> pragma? See L<charnames> and L<overload>.
+
+=item CORE::%s is not a keyword
+
+(F) The CORE:: namespace is reserved for Perl keywords.
+
+=item defined(@array) is deprecated
+
+(D) defined() is not usually useful on arrays because it checks for an
+undefined I<scalar> value. If you want to see if the array is empty,
+just use C<if (@array) { # not empty }> for example.
+
+=item defined(%hash) is deprecated
+
+(D) defined() is not usually useful on hashes because it checks for an
+undefined I<scalar> value. If you want to see if the hash is empty,
+just use C<if (%hash) { # not empty }> for example.
+
+=item Did not produce a valid header
+
+See Server error.
+
+=item (Did you mean "local" instead of "our"?)
+
+(W misc) Remember that "our" does not localize the declared global variable.
+You have declared it again in the same lexical scope, which seems superfluous.
+
+=item Document contains no data
+
+See Server error.
+
+=item entering effective %s failed
+
+(F) While under the C<use filetest> pragma, switching the real and
+effective uids or gids failed.
+
+=item false [] range "%s" in regexp
+
+(W regexp) A character class range must start and end at a literal character, not
+another character class like C<\d> or C<[:alpha:]>. The "-" in your false
+range is interpreted as a literal "-". Consider quoting the "-", "\-".
+See L<perlre>.
+
+=item Filehandle %s opened only for output
+
+(W io) You tried to read from a filehandle opened only for writing. If you
+intended it to be a read/write filehandle, you needed to open it with
+"+<" or "+>" or "+>>" instead of with "<" or nothing. If
+you intended only to read from the file, use "<". See
+L<perlfunc/open>.
+
+=item flock() on closed filehandle %s
+
+(W closed) The filehandle you're attempting to flock() got itself closed some
+time before now. Check your logic flow. flock() operates on filehandles.
+Are you attempting to call flock() on a dirhandle by the same name?
+
+=item Global symbol "%s" requires explicit package name
+
+(F) You've said "use strict vars", which indicates that all variables
+must either be lexically scoped (using "my"), declared beforehand using
+"our", or explicitly qualified to say which package the global variable
+is in (using "::").
+
+=item Hexadecimal number > 0xffffffff non-portable
+
+(W portable) The hexadecimal number you specified is larger than 2**32-1
+(4294967295) and therefore non-portable between systems. See
+L<perlport> for more on portability concerns.
+
+=item Ill-formed CRTL environ value "%s"
+
+(W internal) A warning peculiar to VMS. Perl tried to read the CRTL's internal
+environ array, and encountered an element without the C<=> delimiter
+used to separate keys from values. The element is ignored.
+
+=item Ill-formed message in prime_env_iter: |%s|
+
+(W internal) A warning peculiar to VMS. Perl tried to read a logical name
+or CLI symbol definition when preparing to iterate over %ENV, and
+didn't see the expected delimiter between key and value, so the
+line was ignored.
+
+=item Illegal binary digit %s
+
+(F) You used a digit other than 0 or 1 in a binary number.
+
+=item Illegal binary digit %s ignored
+
+(W digit) You may have tried to use a digit other than 0 or 1 in a binary number.
+Interpretation of the binary number stopped before the offending digit.
+
+=item Illegal number of bits in vec
+
+(F) The number of bits in vec() (the third argument) must be a power of
+two from 1 to 32 (or 64, if your platform supports that).
+
+=item Integer overflow in %s number
+
+(W overflow) The hexadecimal, octal or binary number you have specified either
+as a literal or as an argument to hex() or oct() is too big for your
+architecture, and has been converted to a floating point number. On a
+32-bit architecture the largest hexadecimal, octal or binary number
+representable without overflow is 0xFFFFFFFF, 037777777777, or
+0b11111111111111111111111111111111 respectively. Note that Perl
+transparently promotes all numbers to a floating point representation
+internally--subject to loss of precision errors in subsequent
+operations.
+
+=item Invalid %s attribute: %s
+
+The indicated attribute for a subroutine or variable was not recognized
+by Perl or by a user-supplied handler. See L<attributes>.
+
+=item Invalid %s attributes: %s
+
+The indicated attributes for a subroutine or variable were not recognized
+by Perl or by a user-supplied handler. See L<attributes>.
+
+=item invalid [] range "%s" in regexp
+
+The offending range is now explicitly displayed.
+
+=item Invalid separator character %s in attribute list
+
+(F) Something other than a colon or whitespace was seen between the
+elements of an attribute list. If the previous attribute
+had a parenthesised parameter list, perhaps that list was terminated
+too soon. See L<attributes>.
+
+=item Invalid separator character %s in subroutine attribute list
+
+(F) Something other than a colon or whitespace was seen between the
+elements of a subroutine attribute list. If the previous attribute
+had a parenthesised parameter list, perhaps that list was terminated
+too soon.
+
+=item leaving effective %s failed
+
+(F) While under the C<use filetest> pragma, switching the real and
+effective uids or gids failed.
+
+=item Lvalue subs returning %s not implemented yet
+
+(F) Due to limitations in the current implementation, array and hash
+values cannot be returned in subroutines used in lvalue context.
+See L<perlsub/"Lvalue subroutines">.
+
+=item Method %s not permitted
+
+See Server error.
+
+=item Missing %sbrace%s on \N{}
+
+(F) Wrong syntax of character name literal C<\N{charname}> within
+double-quotish context.
+
+=item Missing command in piped open
+
+(W pipe) You used the C<open(FH, "| command")> or C<open(FH, "command |")>
+construction, but the command was missing or blank.
+
+=item Missing name in "my sub"
+
+(F) The reserved syntax for lexically scoped subroutines requires that they
+have a name with which they can be found.
+
+=item No %s specified for -%c
+
+(F) The indicated command line switch needs a mandatory argument, but
+you haven't specified one.
+
+=item No package name allowed for variable %s in "our"
+
+(F) Fully qualified variable names are not allowed in "our" declarations,
+because that doesn't make much sense under existing semantics. Such
+syntax is reserved for future extensions.
+
+=item No space allowed after -%c
+
+(F) The argument to the indicated command line switch must follow immediately
+after the switch, without intervening spaces.
+
+=item no UTC offset information; assuming local time is UTC
+
+(S) A warning peculiar to VMS. Perl was unable to find the local
+timezone offset, so it's assuming that local system time is equivalent
+to UTC. If it's not, define the logical name F<SYS$TIMEZONE_DIFFERENTIAL>
+to translate to the number of seconds which need to be added to UTC to
+get local time.
+
+=item Octal number > 037777777777 non-portable
+
+(W portable) The octal number you specified is larger than 2**32-1 (4294967295)
+and therefore non-portable between systems. See L<perlport> for more
+on portability concerns.
+
+See also L<perlport> for writing portable code.
+
+=item panic: del_backref
+
+(P) Failed an internal consistency check while trying to reset a weak
+reference.
+
+=item panic: kid popen errno read
+
+(F) forked child returned an incomprehensible message about its errno.
+
+=item panic: magic_killbackrefs
+
+(P) Failed an internal consistency check while trying to reset all weak
+references to an object.
+
+=item Parentheses missing around "%s" list
+
+(W parenthesis) You said something like
+
+ my $foo, $bar = @_;
+
+when you meant
+
+ my ($foo, $bar) = @_;
+
+Remember that "my", "our", and "local" bind tighter than comma.
+
+=item Possible unintended interpolation of %s in string
+
+(W ambiguous) It used to be that Perl would try to guess whether you
+wanted an array interpolated or a literal @. It no longer does this;
+arrays are now I<always> interpolated into strings. This means that
+if you try something like:
+
+ print "fred@example.com";
+
+and the array C<@example> doesn't exist, Perl is going to print
+C<fred.com>, which is probably not what you wanted. To get a literal
+C<@> sign in a string, put a backslash before it, just as you would
+to get a literal C<$> sign.
+
+=item Possible Y2K bug: %s
+
+(W y2k) You are concatenating the number 19 with another number, which
+could be a potential Year 2000 problem.
+
+=item pragma "attrs" is deprecated, use "sub NAME : ATTRS" instead
+
+(W deprecated) You have written something like this:
+
+ sub doit
+ {
+ use attrs qw(locked);
+ }
+
+You should use the new declaration syntax instead.
+
+ sub doit : locked
+ {
+ ...
+
+The C<use attrs> pragma is now obsolete, and is only provided for
+backward-compatibility. See L<perlsub/"Subroutine Attributes">.
+
+
+=item Premature end of script headers
+
+See Server error.
+
+=item Repeat count in pack overflows
+
+(F) You can't specify a repeat count so large that it overflows
+your signed integers. See L<perlfunc/pack>.
+
+=item Repeat count in unpack overflows
+
+(F) You can't specify a repeat count so large that it overflows
+your signed integers. See L<perlfunc/unpack>.
+
+=item realloc() of freed memory ignored
+
+(S) An internal routine called realloc() on something that had already
+been freed.
+
+=item Reference is already weak
+
+(W misc) You have attempted to weaken a reference that is already weak.
+Doing so has no effect.
+
+=item setpgrp can't take arguments
+
+(F) Your system has the setpgrp() from BSD 4.2, which takes no arguments,
+unlike POSIX setpgid(), which takes a process ID and process group ID.
+
+=item Strange *+?{} on zero-length expression
+
+(W regexp) You applied a regular expression quantifier in a place where it
+makes no sense, such as on a zero-width assertion.
+Try putting the quantifier inside the assertion instead. For example,
+the way to match "abc" provided that it is followed by three
+repetitions of "xyz" is C</abc(?=(?:xyz){3})/>, not C</abc(?=xyz){3}/>.
+
+=item switching effective %s is not implemented
+
+(F) While under the C<use filetest> pragma, we cannot switch the
+real and effective uids or gids.
+
+=item This Perl can't reset CRTL environ elements (%s)
+
+=item This Perl can't set CRTL environ elements (%s=%s)
+
+(W internal) Warnings peculiar to VMS. You tried to change or delete an element
+of the CRTL's internal environ array, but your copy of Perl wasn't
+built with a CRTL that contained the setenv() function. You'll need to
+rebuild Perl with a CRTL that does, or redefine F<PERL_ENV_TABLES> (see
+L<perlvms>) so that the environ array isn't the target of the change to
+%ENV which produced the warning.
+
+=item Too late to run %s block
+
+(W void) A CHECK or INIT block is being defined during run time proper,
+when the opportunity to run them has already passed. Perhaps you are
+loading a file with C<require> or C<do> when you should be using
+C<use> instead. Or perhaps you should put the C<require> or C<do>
+inside a BEGIN block.
+
+=item Unknown open() mode '%s'
+
+(F) The second argument of 3-argument open() is not among the list
+of valid modes: C<< < >>, C<< > >>, C<<< >> >>>, C<< +< >>,
+C<< +> >>, C<<< +>> >>>, C<-|>, C<|->.
+
+=item Unknown process %x sent message to prime_env_iter: %s
+
+(P) An error peculiar to VMS. Perl was reading values for %ENV before
+iterating over it, and someone else stuck a message in the stream of
+data Perl expected. Someone's very confused, or perhaps trying to
+subvert Perl's population of %ENV for nefarious purposes.
+
+=item Unrecognized escape \\%c passed through
+
+(W misc) You used a backslash-character combination which is not recognized
+by Perl. The character was understood literally.
+
+=item Unterminated attribute parameter in attribute list
+
+(F) The lexer saw an opening (left) parenthesis character while parsing an
+attribute list, but the matching closing (right) parenthesis
+character was not found. You may need to add (or remove) a backslash
+character to get your parentheses to balance. See L<attributes>.
+
+=item Unterminated attribute list
+
+(F) The lexer found something other than a simple identifier at the start
+of an attribute, and it wasn't a semicolon or the start of a
+block. Perhaps you terminated the parameter list of the previous attribute
+too soon. See L<attributes>.
+
+=item Unterminated attribute parameter in subroutine attribute list
+
+(F) The lexer saw an opening (left) parenthesis character while parsing a
+subroutine attribute list, but the matching closing (right) parenthesis
+character was not found. You may need to add (or remove) a backslash
+character to get your parentheses to balance.
+
+=item Unterminated subroutine attribute list
+
+(F) The lexer found something other than a simple identifier at the start
+of a subroutine attribute, and it wasn't a semicolon or the start of a
+block. Perhaps you terminated the parameter list of the previous attribute
+too soon.
+
+=item Value of CLI symbol "%s" too long
+
+(W misc) A warning peculiar to VMS. Perl tried to read the value of an %ENV
+element from a CLI symbol table, and found a resultant string longer
+than 1024 characters. The return value has been truncated to 1024
+characters.
+
+=item Version number must be a constant number
+
+(P) The attempt to translate a C<use Module n.n LIST> statement into
+its equivalent C<BEGIN> block found an internal inconsistency with
+the version number.
+
+=back
+
+=head1 New tests
+
+=over 4
+
+=item lib/attrs
+
+Compatibility tests for C<sub : attrs> vs the older C<use attrs>.
+
+=item lib/env
+
+Tests for new environment scalar capability (e.g., C<use Env qw($BAR);>).
+
+=item lib/env-array
+
+Tests for new environment array capability (e.g., C<use Env qw(@PATH);>).
+
+=item lib/io_const
+
+IO constants (SEEK_*, _IO*).
+
+=item lib/io_dir
+
+Directory-related IO methods (new, read, close, rewind, tied delete).
+
+=item lib/io_multihomed
+
+INET sockets with multi-homed hosts.
+
+=item lib/io_poll
+
+IO poll().
+
+=item lib/io_unix
+
+UNIX sockets.
+
+=item op/attrs
+
+Regression tests for C<my ($x,@y,%z) : attrs> and <sub : attrs>.
+
+=item op/filetest
+
+File test operators.
+
+=item op/lex_assign
+
+Verify operations that access pad objects (lexicals and temporaries).
+
+=item op/exists_sub
+
+Verify C<exists &sub> operations.
+
+=back
+
+=head1 Incompatible Changes
+
+=head2 Perl Source Incompatibilities
+
+Beware that any new warnings that have been added or old ones
+that have been enhanced are B<not> considered incompatible changes.
+
+Since all new warnings must be explicitly requested via the C<-w>
+switch or the C<warnings> pragma, it is ultimately the programmer's
+responsibility to ensure that warnings are enabled judiciously.
+
+=over 4
+
+=item CHECK is a new keyword
+
+All subroutine definitions named CHECK are now special. See
+C</"Support for CHECK blocks"> for more information.
+
+=item Treatment of list slices of undef has changed
+
+There is a potential incompatibility in the behavior of list slices
+that are comprised entirely of undefined values.
+See L</"Behavior of list slices is more consistent">.
+
+=item Format of $English::PERL_VERSION is different
+
+The English module now sets $PERL_VERSION to $^V (a string value) rather
+than C<$]> (a numeric value). This is a potential incompatibility.
+Send us a report via perlbug if you are affected by this.
+
+See L</"Improved Perl version numbering system"> for the reasons for
+this change.
+
+=item Literals of the form C<1.2.3> parse differently
+
+Previously, numeric literals with more than one dot in them were
+interpreted as a floating point number concatenated with one or more
+numbers. Such "numbers" are now parsed as strings composed of the
+specified ordinals.
+
+For example, C<print 97.98.99> used to output C<97.9899> in earlier
+versions, but now prints C<abc>.
+
+See L</"Support for strings represented as a vector of ordinals">.
+
+=item Possibly changed pseudo-random number generator
+
+Perl programs that depend on reproducing a specific set of pseudo-random
+numbers may now produce different output due to improvements made to the
+rand() builtin. You can use C<sh Configure -Drandfunc=rand> to obtain
+the old behavior.
+
+See L</"Better pseudo-random number generator">.
+
+=item Hashing function for hash keys has changed
+
+Even though Perl hashes are not order preserving, the apparently
+random order encountered when iterating on the contents of a hash
+is actually determined by the hashing algorithm used. Improvements
+in the algorithm may yield a random order that is B<different> from
+that of previous versions, especially when iterating on hashes.
+
+See L</"Better worst-case behavior of hashes"> for additional
+information.
+
+=item C<undef> fails on read only values
+
+Using the C<undef> operator on a readonly value (such as $1) has
+the same effect as assigning C<undef> to the readonly value--it
+throws an exception.
+
+=item Close-on-exec bit may be set on pipe and socket handles
+
+Pipe and socket handles are also now subject to the close-on-exec
+behavior determined by the special variable $^F.
+
+See L</"More consistent close-on-exec behavior">.
+
+=item Writing C<"$$1"> to mean C<"${$}1"> is unsupported
+
+Perl 5.004 deprecated the interpretation of C<$$1> and
+similar within interpolated strings to mean C<$$ . "1">,
+but still allowed it.
+
+In Perl 5.6.0 and later, C<"$$1"> always means C<"${$1}">.
+
+=item delete(), each(), values() and C<\(%h)>
+
+operate on aliases to values, not copies
+
+delete(), each(), values() and hashes (e.g. C<\(%h)>)
+in a list context return the actual
+values in the hash, instead of copies (as they used to in earlier
+versions). Typical idioms for using these constructs copy the
+returned values, but this can make a significant difference when
+creating references to the returned values. Keys in the hash are still
+returned as copies when iterating on a hash.
+
+See also L</"delete(), each(), values() and hash iteration are faster">.
+
+=item vec(EXPR,OFFSET,BITS) enforces powers-of-two BITS
+
+vec() generates a run-time error if the BITS argument is not
+a valid power-of-two integer.
+
+=item Text of some diagnostic output has changed
+
+Most references to internal Perl operations in diagnostics
+have been changed to be more descriptive. This may be an
+issue for programs that may incorrectly rely on the exact
+text of diagnostics for proper functioning.
+
+=item C<%@> has been removed
+
+The undocumented special variable C<%@> that used to accumulate
+"background" errors (such as those that happen in DESTROY())
+has been removed, because it could potentially result in memory
+leaks.
+
+=item Parenthesized not() behaves like a list operator
+
+The C<not> operator now falls under the "if it looks like a function,
+it behaves like a function" rule.
+
+As a result, the parenthesized form can be used with C<grep> and C<map>.
+The following construct used to be a syntax error before, but it works
+as expected now:
+
+ grep not($_), @things;
+
+On the other hand, using C<not> with a literal list slice may not
+work. The following previously allowed construct:
+
+ print not (1,2,3)[0];
+
+needs to be written with additional parentheses now:
+
+ print not((1,2,3)[0]);
+
+The behavior remains unaffected when C<not> is not followed by parentheses.
+
+=item Semantics of bareword prototype C<(*)> have changed
+
+The semantics of the bareword prototype C<*> have changed. Perl 5.005
+always coerced simple scalar arguments to a typeglob, which wasn't useful
+in situations where the subroutine must distinguish between a simple
+scalar and a typeglob. The new behavior is to not coerce bareword
+arguments to a typeglob. The value will always be visible as either
+a simple scalar or as a reference to a typeglob.
+
+See L</"More functional bareword prototype (*)">.
+
+=item Semantics of bit operators may have changed on 64-bit platforms
+
+If your platform is either natively 64-bit or if Perl has been
+configured to used 64-bit integers, i.e., $Config{ivsize} is 8,
+there may be a potential incompatibility in the behavior of bitwise
+numeric operators (& | ^ ~ << >>). These operators used to strictly
+operate on the lower 32 bits of integers in previous versions, but now
+operate over the entire native integral width. In particular, note
+that unary C<~> will produce different results on platforms that have
+different $Config{ivsize}. For portability, be sure to mask off
+the excess bits in the result of unary C<~>, e.g., C<~$x & 0xffffffff>.
+
+See L</"Bit operators support full native integer width">.
+
+=item More builtins taint their results
+
+As described in L</"Improved security features">, there may be more
+sources of taint in a Perl program.
+
+To avoid these new tainting behaviors, you can build Perl with the
+Configure option C<-Accflags=-DINCOMPLETE_TAINTS>. Beware that the
+ensuing perl binary may be insecure.
+
+=back
+
+=head2 C Source Incompatibilities
+
+=over 4
+
+=item C<PERL_POLLUTE>
+
+Release 5.005 grandfathered old global symbol names by providing preprocessor
+macros for extension source compatibility. As of release 5.6.0, these
+preprocessor definitions are not available by default. You need to explicitly
+compile perl with C<-DPERL_POLLUTE> to get these definitions. For
+extensions still using the old symbols, this option can be
+specified via MakeMaker:
+
+ perl Makefile.PL POLLUTE=1
+
+=item C<PERL_IMPLICIT_CONTEXT>
+
+This new build option provides a set of macros for all API functions
+such that an implicit interpreter/thread context argument is passed to
+every API function. As a result of this, something like C<sv_setsv(foo,bar)>
+amounts to a macro invocation that actually translates to something like
+C<Perl_sv_setsv(my_perl,foo,bar)>. While this is generally expected
+to not have any significant source compatibility issues, the difference
+between a macro and a real function call will need to be considered.
+
+This means that there B<is> a source compatibility issue as a result of
+this if your extensions attempt to use pointers to any of the Perl API
+functions.
+
+Note that the above issue is not relevant to the default build of
+Perl, whose interfaces continue to match those of prior versions
+(but subject to the other options described here).
+
+See L<perlguts/"The Perl API"> for detailed information on the
+ramifications of building Perl with this option.
+
+ NOTE: PERL_IMPLICIT_CONTEXT is automatically enabled whenever Perl is built
+ with one of -Dusethreads, -Dusemultiplicity, or both. It is not
+ intended to be enabled by users at this time.
+
+=item C<PERL_POLLUTE_MALLOC>
+
+Enabling Perl's malloc in release 5.005 and earlier caused the namespace of
+the system's malloc family of functions to be usurped by the Perl versions,
+since by default they used the same names. Besides causing problems on
+platforms that do not allow these functions to be cleanly replaced, this
+also meant that the system versions could not be called in programs that
+used Perl's malloc. Previous versions of Perl have allowed this behaviour
+to be suppressed with the HIDEMYMALLOC and EMBEDMYMALLOC preprocessor
+definitions.
+
+As of release 5.6.0, Perl's malloc family of functions have default names
+distinct from the system versions. You need to explicitly compile perl with
+C<-DPERL_POLLUTE_MALLOC> to get the older behaviour. HIDEMYMALLOC
+and EMBEDMYMALLOC have no effect, since the behaviour they enabled is now
+the default.
+
+Note that these functions do B<not> constitute Perl's memory allocation API.
+See L<perlguts/"Memory Allocation"> for further information about that.
+
+=back
+
+=head2 Compatible C Source API Changes
+
+=over 4
+
+=item C<PATCHLEVEL> is now C<PERL_VERSION>
+
+The cpp macros C<PERL_REVISION>, C<PERL_VERSION>, and C<PERL_SUBVERSION>
+are now available by default from perl.h, and reflect the base revision,
+patchlevel, and subversion respectively. C<PERL_REVISION> had no
+prior equivalent, while C<PERL_VERSION> and C<PERL_SUBVERSION> were
+previously available as C<PATCHLEVEL> and C<SUBVERSION>.
+
+The new names cause less pollution of the B<cpp> namespace and reflect what
+the numbers have come to stand for in common practice. For compatibility,
+the old names are still supported when F<patchlevel.h> is explicitly
+included (as required before), so there is no source incompatibility
+from the change.
+
+=back
+
+=head2 Binary Incompatibilities
+
+In general, the default build of this release is expected to be binary
+compatible for extensions built with the 5.005 release or its maintenance
+versions. However, specific platforms may have broken binary compatibility
+due to changes in the defaults used in hints files. Therefore, please be
+sure to always check the platform-specific README files for any notes to
+the contrary.
+
+The usethreads or usemultiplicity builds are B<not> binary compatible
+with the corresponding builds in 5.005.
+
+On platforms that require an explicit list of exports (AIX, OS/2 and Windows,
+among others), purely internal symbols such as parser functions and the
+run time opcodes are not exported by default. Perl 5.005 used to export
+all functions irrespective of whether they were considered part of the
+public API or not.
+
+For the full list of public API functions, see L<perlapi>.
+
+=head1 Known Problems
+
+=head2 Localizing a tied hash element may leak memory
+
+As of the 5.6.1 release, there is a known leak when code such as this
+is executed:
+
+ use Tie::Hash;
+ tie my %tie_hash => 'Tie::StdHash';
+
+ ...
+
+ local($tie_hash{Foo}) = 1; # leaks
+
+=head2 Known test failures
+
+=over
+
+=item 64-bit builds
+
+Subtest #15 of lib/b.t may fail under 64-bit builds on platforms such
+as HP-UX PA64 and Linux IA64. The issue is still being investigated.
+
+The lib/io_multihomed test may hang in HP-UX if Perl has been
+configured to be 64-bit. Because other 64-bit platforms do not
+hang in this test, HP-UX is suspect. All other tests pass
+in 64-bit HP-UX. The test attempts to create and connect to
+"multihomed" sockets (sockets which have multiple IP addresses).
+
+Note that 64-bit support is still experimental.
+
+=item Failure of Thread tests
+
+The subtests 19 and 20 of lib/thr5005.t test are known to fail due to
+fundamental problems in the 5.005 threading implementation. These are
+not new failures--Perl 5.005_0x has the same bugs, but didn't have these
+tests. (Note that support for 5.005-style threading remains experimental.)
+
+=item NEXTSTEP 3.3 POSIX test failure
+
+In NEXTSTEP 3.3p2 the implementation of the strftime(3) in the
+operating system libraries is buggy: the %j format numbers the days of
+a month starting from zero, which, while being logical to programmers,
+will cause the subtests 19 to 27 of the lib/posix test may fail.
+
+=item Tru64 (aka Digital UNIX, aka DEC OSF/1) lib/sdbm test failure with gcc
+
+If compiled with gcc 2.95 the lib/sdbm test will fail (dump core).
+The cure is to use the vendor cc, it comes with the operating system
+and produces good code.
+
+=back
+
+=head2 EBCDIC platforms not fully supported
+
+In earlier releases of Perl, EBCDIC environments like OS390 (also
+known as Open Edition MVS) and VM-ESA were supported. Due to changes
+required by the UTF-8 (Unicode) support, the EBCDIC platforms are not
+supported in Perl 5.6.0.
+
+The 5.6.1 release improves support for EBCDIC platforms, but they
+are not fully supported yet.
+
+=head2 UNICOS/mk CC failures during Configure run
+
+In UNICOS/mk the following errors may appear during the Configure run:
+
+ Guessing which symbols your C compiler and preprocessor define...
+ CC-20 cc: ERROR File = try.c, Line = 3
+ ...
+ bad switch yylook 79bad switch yylook 79bad switch yylook 79bad switch yylook 79#ifdef A29K
+ ...
+ 4 errors detected in the compilation of "try.c".
+
+The culprit is the broken awk of UNICOS/mk. The effect is fortunately
+rather mild: Perl itself is not adversely affected by the error, only
+the h2ph utility coming with Perl, and that is rather rarely needed
+these days.
+
+=head2 Arrow operator and arrays
+
+When the left argument to the arrow operator C<< -> >> is an array, or
+the C<scalar> operator operating on an array, the result of the
+operation must be considered erroneous. For example:
+
+ @x->[2]
+ scalar(@x)->[2]
+
+These expressions will get run-time errors in some future release of
+Perl.
+
+=head2 Experimental features
+
+As discussed above, many features are still experimental. Interfaces and
+implementation of these features are subject to change, and in extreme cases,
+even subject to removal in some future release of Perl. These features
+include the following:
+
+=over 4
+
+=item Threads
+
+=item Unicode
+
+=item 64-bit support
+
+=item Lvalue subroutines
+
+=item Weak references
+
+=item The pseudo-hash data type
+
+=item The Compiler suite
+
+=item Internal implementation of file globbing
+
+=item The DB module
+
+=item The regular expression code constructs:
+
+C<(?{ code })> and C<(??{ code })>
+
+=back
+
+=head1 Obsolete Diagnostics
+
+=over 4
+
+=item Character class syntax [: :] is reserved for future extensions
+
+(W) Within regular expression character classes ([]) the syntax beginning
+with "[:" and ending with ":]" is reserved for future extensions.
+If you need to represent those character sequences inside a regular
+expression character class, just quote the square brackets with the
+backslash: "\[:" and ":\]".
+
+=item Ill-formed logical name |%s| in prime_env_iter
+
+(W) A warning peculiar to VMS. A logical name was encountered when preparing
+to iterate over %ENV which violates the syntactic rules governing logical
+names. Because it cannot be translated normally, it is skipped, and will not
+appear in %ENV. This may be a benign occurrence, as some software packages
+might directly modify logical name tables and introduce nonstandard names,
+or it may indicate that a logical name table has been corrupted.
+
+=item In string, @%s now must be written as \@%s
+
+The description of this error used to say:
+
+ (Someday it will simply assume that an unbackslashed @
+ interpolates an array.)
+
+That day has come, and this fatal error has been removed. It has been
+replaced by a non-fatal warning instead.
+See L</Arrays now always interpolate into double-quoted strings> for
+details.
+
+=item Probable precedence problem on %s
+
+(W) The compiler found a bareword where it expected a conditional,
+which often indicates that an || or && was parsed as part of the
+last argument of the previous construct, for example:
+
+ open FOO || die;
+
+=item regexp too big
+
+(F) The current implementation of regular expressions uses shorts as
+address offsets within a string. Unfortunately this means that if
+the regular expression compiles to longer than 32767, it'll blow up.
+Usually when you want a regular expression this big, there is a better
+way to do it with multiple statements. See L<perlre>.
+
+=item Use of "$$<digit>" to mean "${$}<digit>" is deprecated
+
+(D) Perl versions before 5.004 misinterpreted any type marker followed
+by "$" and a digit. For example, "$$0" was incorrectly taken to mean
+"${$}0" instead of "${$0}". This bug is (mostly) fixed in Perl 5.004.
+
+However, the developers of Perl 5.004 could not fix this bug completely,
+because at least two widely-used modules depend on the old meaning of
+"$$0" in a string. So Perl 5.004 still interprets "$$<digit>" in the
+old (broken) way inside strings; but it generates this message as a
+warning. And in Perl 5.005, this special treatment will cease.
+
+=back
+
+=head1 Reporting Bugs
+
+If you find what you think is a bug, you might check the
+articles recently posted to the comp.lang.perl.misc newsgroup.
+There may also be information at http://www.perl.com/, the Perl
+Home Page.
+
+If you believe you have an unreported bug, please run the B<perlbug>
+program included with your release. Be sure to trim your bug down
+to a tiny but sufficient test case. Your bug report, along with the
+output of C<perl -V>, will be sent off to perlbug@perl.org to be
+analysed by the Perl porting team.
+
+=head1 SEE ALSO
+
+The F<Changes> file for exhaustive details on what changed.
+
+The F<INSTALL> file for how to build Perl.
+
+The F<README> file for general stuff.
+
+The F<Artistic> and F<Copying> files for copyright information.
+
+=head1 HISTORY
+
+Written by Gurusamy Sarathy <F<gsar@ActiveState.com>>, with many
+contributions from The Perl Porters.
+
+Send omissions or corrections to <F<perlbug@perl.org>>.
+
+=cut
mkdir FILENAME, msgctl ID,CMD,ARG, msgget KEY,FLAGS, msgrcv
ID,VAR,SIZE,TYPE,FLAGS, msgsnd ID,MSG,FLAGS, my EXPR, my EXPR : ATTRIBUTES,
next LABEL, next, no Module LIST, oct EXPR, oct, open FILEHANDLE,EXPR, open
-FILEHANDLE,MODE,EXPR, open FILEHANDLE,MODE,EXPR,LIST, open FILEHANDLE,
-opendir DIRHANDLE,EXPR, ord EXPR, ord, our EXPR, our EXPR : ATTRIBUTES,
-pack TEMPLATE,LIST, package NAMESPACE, package, pipe
-READHANDLE,WRITEHANDLE, pop ARRAY, pop, pos SCALAR, pos, print FILEHANDLE
-LIST, print LIST, print, printf FILEHANDLE FORMAT, LIST, printf FORMAT,
-LIST, prototype FUNCTION, push ARRAY,LIST, q/STRING/, qq/STRING/,
-qr/STRING/, qx/STRING/, qw/STRING/, quotemeta EXPR, quotemeta, rand EXPR,
-rand, read FILEHANDLE,SCALAR,LENGTH,OFFSET, read FILEHANDLE,SCALAR,LENGTH,
-readdir DIRHANDLE, readline EXPR, readlink EXPR, readlink, readpipe EXPR,
-recv SOCKET,SCALAR,LENGTH,FLAGS, redo LABEL, redo, ref EXPR, ref, rename
-OLDNAME,NEWNAME, require VERSION, require EXPR, require, reset EXPR, reset,
-return EXPR, return, reverse LIST, rewinddir DIRHANDLE, rindex
-STR,SUBSTR,POSITION, rindex STR,SUBSTR, rmdir FILENAME, rmdir, s///, scalar
-EXPR, seek FILEHANDLE,POSITION,WHENCE, seekdir DIRHANDLE,POS, select
-FILEHANDLE, select, select RBITS,WBITS,EBITS,TIMEOUT, semctl
-ID,SEMNUM,CMD,ARG, semget KEY,NSEMS,FLAGS, semop KEY,OPSTRING, send
+FILEHANDLE,MODE,EXPR, open FILEHANDLE,MODE,EXPR,LIST, open
+FILEHANDLE,MODE,REFERENCE, open FILEHANDLE, opendir DIRHANDLE,EXPR, ord
+EXPR, ord, our EXPR, our EXPR : ATTRIBUTES, pack TEMPLATE,LIST, package
+NAMESPACE, package, pipe READHANDLE,WRITEHANDLE, pop ARRAY, pop, pos
+SCALAR, pos, print FILEHANDLE LIST, print LIST, print, printf FILEHANDLE
+FORMAT, LIST, printf FORMAT, LIST, prototype FUNCTION, push ARRAY,LIST,
+q/STRING/, qq/STRING/, qr/STRING/, qx/STRING/, qw/STRING/, quotemeta EXPR,
+quotemeta, rand EXPR, rand, read FILEHANDLE,SCALAR,LENGTH,OFFSET, read
+FILEHANDLE,SCALAR,LENGTH, readdir DIRHANDLE, readline EXPR, readlink EXPR,
+readlink, readpipe EXPR, recv SOCKET,SCALAR,LENGTH,FLAGS, redo LABEL, redo,
+ref EXPR, ref, rename OLDNAME,NEWNAME, require VERSION, require EXPR,
+require, reset EXPR, reset, return EXPR, return, reverse LIST, rewinddir
+DIRHANDLE, rindex STR,SUBSTR,POSITION, rindex STR,SUBSTR, rmdir FILENAME,
+rmdir, s///, scalar EXPR, seek FILEHANDLE,POSITION,WHENCE, seekdir
+DIRHANDLE,POS, select FILEHANDLE, select, select RBITS,WBITS,EBITS,TIMEOUT,
+semctl ID,SEMNUM,CMD,ARG, semget KEY,NSEMS,FLAGS, semop KEY,OPSTRING, send
SOCKET,MSG,FLAGS,TO, send SOCKET,MSG,FLAGS, setpgrp PID,PGRP, setpriority
WHICH,WHO,PRIORITY, setsockopt SOCKET,LEVEL,OPTNAME,OPTVAL, shift ARRAY,
shift, shmctl ID,CMD,ARG, shmget KEY,SIZE,FLAGS, shmread ID,VAR,POS,SIZE,
=item Unicode
+=item Another Portable Binary Encoding
+
=back
=item Lengths and Widths
=item Dynamic Templates
-=item Another Portable Binary Encoding
-
=back
=item Packing and Unpacking C Structures
=item Pack Recipes
+=item Funnies Section
+
=item Authors
=back
=item DESCRIPTION
+=item Highlights
+
=item Incompatible Changes
=over 4
=item Socket Extension Dynamic in VMS
+=item IEEE-format Floating Point Default on OpenVMS Alpha
+
=item Different Definition of the Unicode Character Classes \p{In...}
=item Perl Parser Stress Tested
=item Linux With Sfio Fails op/misc Test 48
+=item Mac OS X
+
=item OS/390
=item op/sprintf tests 129 and 130
=back
+=head2 perl561delta, perldelta - what's new for perl v5.6.x
+
+=over 4
+
+=item DESCRIPTION
+
+=item Summary of changes between 5.6.0 and 5.6.1
+
+=over 4
+
+=item Security Issues
+
+=item Core bug fixes
+
+C<UNIVERSAL::isa()>, Memory leaks, Numeric conversions, qw(a\\b), caller(),
+Bugs in regular expressions, "slurp" mode, Autovivification of symbolic
+references to special variables, Lexical warnings, Spurious warnings and
+errors, glob(), Tainting, sort(), #line directives, Subroutine prototypes,
+map(), Debugger, PERL5OPT, chop(), Unicode support, 64-bit support,
+Compiler, Lvalue subroutines, IO::Socket, File::Find, xsubpp, C<no
+Module;>, Tests
+
+=item Core features
+
+=item Configuration issues
+
+=item Documentation
+
+=item Bundled modules
+
+B::Concise, File::Temp, Pod::LaTeX, Pod::Text::Overstrike, CGI, CPAN,
+Class::Struct, DB_File, Devel::Peek, File::Find, Getopt::Long, IO::Poll,
+IPC::Open3, Math::BigFloat, Math::Complex, Net::Ping, Opcode, Pod::Parser,
+Pod::Text, SDBM_File, Sys::Syslog, Tie::RefHash, Tie::SubstrHash
+
+=item Platform-specific improvements
+
+NCR MP-RAS, NonStop-UX
+
+=item Interpreter cloning, threads, and concurrency
+
+=item Lexically scoped warning categories
+
+=item Unicode and UTF-8 support
+
+=item Support for interpolating named characters
+
+=item "our" declarations
+
+=item Support for strings represented as a vector of ordinals
+
+=item Improved Perl version numbering system
+
+=item New syntax for declaring subroutine attributes
+
+=item File and directory handles can be autovivified
+
+=item open() with more than two arguments
+
+=item 64-bit support
+
+=item Large file support
+
+=item Long doubles
+
+=item "more bits"
+
+=item Enhanced support for sort() subroutines
+
+=item C<sort $coderef @foo> allowed
+
+=item File globbing implemented internally
+
+=item Support for CHECK blocks
+
+=item POSIX character class syntax [: :] supported
+
+=item Better pseudo-random number generator
+
+=item Improved C<qw//> operator
+
+=item Better worst-case behavior of hashes
+
+=item pack() format 'Z' supported
+
+=item pack() format modifier '!' supported
+
+=item pack() and unpack() support counted strings
+
+=item Comments in pack() templates
+
+=item Weak references
+
+=item Binary numbers supported
+
+=item Lvalue subroutines
+
+=item Some arrows may be omitted in calls through references
+
+=item Boolean assignment operators are legal lvalues
+
+=item exists() is supported on subroutine names
+
+=item exists() and delete() are supported on array elements
+
+=item Pseudo-hashes work better
+
+=item Automatic flushing of output buffers
+
+=item Better diagnostics on meaningless filehandle operations
+
+=item Where possible, buffered data discarded from duped input filehandle
+
+=item eof() has the same old magic as <>
+
+=item binmode() can be used to set :crlf and :raw modes
+
+=item C<-T> filetest recognizes UTF-8 encoded files as "text"
+
+=item system(), backticks and pipe open now reflect exec() failure
+
+=item Improved diagnostics
+
+=item Diagnostics follow STDERR
+
+=item More consistent close-on-exec behavior
+
+=item syswrite() ease-of-use
+
+=item Better syntax checks on parenthesized unary operators
+
+=item Bit operators support full native integer width
+
+=item Improved security features
+
+=item More functional bareword prototype (*)
+
+=item C<require> and C<do> may be overridden
+
+=item $^X variables may now have names longer than one character
+
+=item New variable $^C reflects C<-c> switch
+
+=item New variable $^V contains Perl version as a string
+
+=item Optional Y2K warnings
+
+=item Arrays now always interpolate into double-quoted strings
+
+=back
+
+=item Modules and Pragmata
+
+=over 4
+
+=item Modules
+
+attributes, B, Benchmark, ByteLoader, constant, charnames, Data::Dumper,
+DB, DB_File, Devel::DProf, Devel::Peek, Dumpvalue, DynaLoader, English,
+Env, Fcntl, File::Compare, File::Find, File::Glob, File::Spec,
+File::Spec::Functions, Getopt::Long, IO, JPL, lib, Math::BigInt,
+Math::Complex, Math::Trig, Pod::Parser, Pod::InputObjects, Pod::Checker,
+podchecker, Pod::ParseUtils, Pod::Find, Pod::Select, podselect, Pod::Usage,
+pod2usage, Pod::Text and Pod::Man, SDBM_File, Sys::Syslog, Sys::Hostname,
+Term::ANSIColor, Time::Local, Win32, XSLoader, DBM Filters
+
+=item Pragmata
+
+=back
+
+=item Utility Changes
+
+=over 4
+
+=item dprofpp
+
+=item find2perl
+
+=item h2xs
+
+=item perlcc
+
+=item perldoc
+
+=item The Perl Debugger
+
+=back
+
+=item Improved Documentation
+
+perlapi.pod, perlboot.pod, perlcompile.pod, perldbmfilter.pod,
+perldebug.pod, perldebguts.pod, perlfork.pod, perlfilter.pod, perlhack.pod,
+perlintern.pod, perllexwarn.pod, perlnumber.pod, perlopentut.pod,
+perlreftut.pod, perltootc.pod, perltodo.pod, perlunicode.pod
+
+=item Performance enhancements
+
+=over 4
+
+=item Simple sort() using { $a <=> $b } and the like are optimized
+
+=item Optimized assignments to lexical variables
+
+=item Faster subroutine calls
+
+=item delete(), each(), values() and hash iteration are faster
+
+=back
+
+=item Installation and Configuration Improvements
+
+=over 4
+
+=item -Dusethreads means something different
+
+=item New Configure flags
+
+=item Threadedness and 64-bitness now more daring
+
+=item Long Doubles
+
+=item -Dusemorebits
+
+=item -Duselargefiles
+
+=item installusrbinperl
+
+=item SOCKS support
+
+=item C<-A> flag
+
+=item Enhanced Installation Directories
+
+=item gcc automatically tried if 'cc' does not seem to be working
+
+=back
+
+=item Platform specific changes
+
+=over 4
+
+=item Supported platforms
+
+=item DOS
+
+=item OS390 (OpenEdition MVS)
+
+=item VMS
+
+=item Win32
+
+=back
+
+=item Significant bug fixes
+
+=over 4
+
+=item <HANDLE> on empty files
+
+=item C<eval '...'> improvements
+
+=item All compilation errors are true errors
+
+=item Implicitly closed filehandles are safer
+
+=item Behavior of list slices is more consistent
+
+=item C<(\$)> prototype and C<$foo{a}>
+
+=item C<goto &sub> and AUTOLOAD
+
+=item C<-bareword> allowed under C<use integer>
+
+=item Failures in DESTROY()
+
+=item Locale bugs fixed
+
+=item Memory leaks
+
+=item Spurious subroutine stubs after failed subroutine calls
+
+=item Taint failures under C<-U>
+
+=item END blocks and the C<-c> switch
+
+=item Potential to leak DATA filehandles
+
+=back
+
+=item New or Changed Diagnostics
+
+"%s" variable %s masks earlier declaration in same %s, "my sub" not yet
+implemented, "our" variable %s redeclared, '!' allowed only after types %s,
+/ cannot take a count, / must be followed by a, A or Z, / must be followed
+by a*, A* or Z*, / must follow a numeric type, /%s/: Unrecognized escape
+\\%c passed through, /%s/: Unrecognized escape \\%c in character class
+passed through, /%s/ should probably be written as "%s", %s() called too
+early to check prototype, %s argument is not a HASH or ARRAY element, %s
+argument is not a HASH or ARRAY element or slice, %s argument is not a
+subroutine name, %s package attribute may clash with future reserved word:
+%s, (in cleanup) %s, <> should be quotes, Attempt to join self, Bad evalled
+substitution pattern, Bad realloc() ignored, Bareword found in conditional,
+Binary number > 0b11111111111111111111111111111111 non-portable, Bit vector
+size > 32 non-portable, Buffer overflow in prime_env_iter: %s, Can't check
+filesystem of script "%s", Can't declare class for non-scalar %s in "%s",
+Can't declare %s in "%s", Can't ignore signal CHLD, forcing to default,
+Can't modify non-lvalue subroutine call, Can't read CRTL environ, Can't
+remove %s: %s, skipping file, Can't return %s from lvalue subroutine, Can't
+weaken a nonreference, Character class [:%s:] unknown, Character class
+syntax [%s] belongs inside character classes, Constant is not %s reference,
+constant(%s): %s, CORE::%s is not a keyword, defined(@array) is deprecated,
+defined(%hash) is deprecated, Did not produce a valid header, (Did you mean
+"local" instead of "our"?), Document contains no data, entering effective
+%s failed, false [] range "%s" in regexp, Filehandle %s opened only for
+output, flock() on closed filehandle %s, Global symbol "%s" requires
+explicit package name, Hexadecimal number > 0xffffffff non-portable,
+Ill-formed CRTL environ value "%s", Ill-formed message in prime_env_iter:
+|%s|, Illegal binary digit %s, Illegal binary digit %s ignored, Illegal
+number of bits in vec, Integer overflow in %s number, Invalid %s attribute:
+%s, Invalid %s attributes: %s, invalid [] range "%s" in regexp, Invalid
+separator character %s in attribute list, Invalid separator character %s in
+subroutine attribute list, leaving effective %s failed, Lvalue subs
+returning %s not implemented yet, Method %s not permitted, Missing
+%sbrace%s on \N{}, Missing command in piped open, Missing name in "my sub",
+No %s specified for -%c, No package name allowed for variable %s in "our",
+No space allowed after -%c, no UTC offset information; assuming local time
+is UTC, Octal number > 037777777777 non-portable, panic: del_backref,
+panic: kid popen errno read, panic: magic_killbackrefs, Parentheses missing
+around "%s" list, Possible unintended interpolation of %s in string,
+Possible Y2K bug: %s, pragma "attrs" is deprecated, use "sub NAME : ATTRS"
+instead, Premature end of script headers, Repeat count in pack overflows,
+Repeat count in unpack overflows, realloc() of freed memory ignored,
+Reference is already weak, setpgrp can't take arguments, Strange *+?{} on
+zero-length expression, switching effective %s is not implemented, This
+Perl can't reset CRTL environ elements (%s), This Perl can't set CRTL
+environ elements (%s=%s), Too late to run %s block, Unknown open() mode
+'%s', Unknown process %x sent message to prime_env_iter: %s, Unrecognized
+escape \\%c passed through, Unterminated attribute parameter in attribute
+list, Unterminated attribute list, Unterminated attribute parameter in
+subroutine attribute list, Unterminated subroutine attribute list, Value of
+CLI symbol "%s" too long, Version number must be a constant number
+
+=item New tests
+
+=item Incompatible Changes
+
+=over 4
+
+=item Perl Source Incompatibilities
+
+CHECK is a new keyword, Treatment of list slices of undef has changed,
+Format of $English::PERL_VERSION is different, Literals of the form
+C<1.2.3> parse differently, Possibly changed pseudo-random number
+generator, Hashing function for hash keys has changed, C<undef> fails on
+read only values, Close-on-exec bit may be set on pipe and socket handles,
+Writing C<"$$1"> to mean C<"${$}1"> is unsupported, delete(), each(),
+values() and C<\(%h)>, vec(EXPR,OFFSET,BITS) enforces powers-of-two BITS,
+Text of some diagnostic output has changed, C<%@> has been removed,
+Parenthesized not() behaves like a list operator, Semantics of bareword
+prototype C<(*)> have changed, Semantics of bit operators may have changed
+on 64-bit platforms, More builtins taint their results
+
+=item C Source Incompatibilities
+
+C<PERL_POLLUTE>, C<PERL_IMPLICIT_CONTEXT>, C<PERL_POLLUTE_MALLOC>
+
+=item Compatible C Source API Changes
+
+C<PATCHLEVEL> is now C<PERL_VERSION>
+
+=item Binary Incompatibilities
+
+=back
+
+=item Known Problems
+
+=over 4
+
+=item Localizing a tied hash element may leak memory
+
+=item Known test failures
+
+64-bit builds, Failure of Thread tests, NEXTSTEP 3.3 POSIX test failure,
+Tru64 (aka Digital UNIX, aka DEC OSF/1) lib/sdbm test failure with gcc
+
+=item EBCDIC platforms not fully supported
+
+=item UNICOS/mk CC failures during Configure run
+
+=item Arrow operator and arrays
+
+=item Experimental features
+
+Threads, Unicode, 64-bit support, Lvalue subroutines, Weak references, The
+pseudo-hash data type, The Compiler suite, Internal implementation of file
+globbing, The DB module, The regular expression code constructs:
+
+=back
+
+=item Obsolete Diagnostics
+
+Character class syntax [: :] is reserved for future extensions, Ill-formed
+logical name |%s| in prime_env_iter, In string, @%s now must be written as
+\@%s, Probable precedence problem on %s, regexp too big, Use of "$$<digit>"
+to mean "${$}<digit>" is deprecated
+
+=item Reporting Bugs
+
+=item SEE ALSO
+
+=item HISTORY
+
+=back
+
=head2 perl56delta, perldelta - what's new for perl v5.6.0
=over 4
=back
-=head2 perldos - Perl under DOS, W31, W95.
-
-=over 4
-
-=item SYNOPSIS
-
-=item DESCRIPTION
-
-=over 4
-
-=item Prerequisites for Compiling Perl on DOS
-
-DJGPP, Pthreads
-
-=item Shortcomings of Perl under DOS
-
-=item Building Perl on DOS
-
-=item Testing Perl on DOS
-
-=item Installation of Perl on DOS
-
-=back
-
-=item BUILDING AND INSTALLING MODULES ON DOS
-
-=over 4
-
-=item Building Prerequisites for Perl on DOS
-
-=item Unpacking CPAN Modules on DOS
-
-=item Building Non-XS Modules on DOS
-
-=item Building XS Modules on DOS
-
-=back
-
-=item AUTHOR
-
-=item SEE ALSO
-
-=back
-
=head2 perlepoc, README.epoc - Perl for EPOC
=over 4
=back
-=head2 perlwin32 - Perl under Win32
-
-=over 4
-
-=item SYNOPSIS
-
-=item DESCRIPTION
-
-=over 4
-
-=item Setting Up Perl on Win32
-
-Make, Command Shell, Borland C++, Microsoft Visual C++, Mingw32 with GCC
-
-=item Building
-
-=item Testing Perl on Win32
-
-=item Installation of Perl on Win32
-
-=item Usage Hints for Perl on Win32
-
-Environment Variables, File Globbing, Using perl from the command line,
-Building Extensions, Command-line Wildcard Expansion, Win32 Specific
-Extensions, Running Perl Scripts, Miscellaneous Things
-
-=back
-
-=item BUGS AND CAVEATS
-
-=item AUTHORS
-
-Gary Ng E<lt>71564.1743@CompuServe.COME<gt>, Gurusamy Sarathy
-E<lt>gsar@activestate.comE<gt>, Nick Ing-Simmons
-E<lt>nick@ing-simmons.netE<gt>
-
-=item SEE ALSO
-
-=item HISTORY
-
-=back
-
=head1 PRAGMA DOCUMENTATION
=head2 attrs - set/get attributes of a subroutine (deprecated)
=back
+=item ppport.h
+
=item AUTHOR
=item SEE ALSO
=item DESCRIPTION
-icmp, udp, tcp, stream, external
-
=over 4
=item Functions
Net::Ping->new([$proto [, $def_timeout [, $bytes]]]);, $p->ping($host [,
-$timeout]);, $p->open($host);, $p->close();, pingecho($host [, $timeout]);
+$timeout]);, $p->open($host);, $p->open($host);, $p->close();,
+pingecho($host [, $timeout]);
=back
+=item WARNING
+
=item NOTES
+=item AUTHOR(S)
+
+=item COPYRIGHT
+
=back
=head2 Net::SMTP - Simple Mail Transfer Protocol Client
projects / p5sagit/p5-mst-13.2.git / commitdiff