# same terms as Perl itself. If in doubt,
# write to mjd-perl-memoize+@plover.com for a license.
#
-# Version 0.65 beta $Revision: 1.17 $ $Date: 2000/10/24 04:33:49 $
+# Version 0.66 $Revision: 1.18 $ $Date: 2001/06/24 17:16:47 $
package Memoize;
-$VERSION = '0.65';
+$VERSION = '0.66';
# Compile-time constants
sub SCALAR () { 0 }
`Memoizing' a function makes it faster by trading space for time. It
does this by caching the return values of the function in a table.
If you call the function again with the same arguments, C<memoize>
-jmups in and gives you the value out of the table, instead of letting
+jumps in and gives you the value out of the table, instead of letting
the function compute the value all over again.
Here is an extreme example. Consider the Fibonacci sequence, defined
$hash{B} ||= 2;
$hash{C} ||= 7;
- join($;, $a, map ($_ => $hash{$_}) sort keys %hash);
+ join(',', $a, map ($_ => $hash{$_}) sort keys %hash);
}
Each of the argument lists above comes out of the C<normalize_f>
function looking exactly the same, like this:
- OUCH^\B^\2^\C^\7
+ OUCH,B,2,C,7
You would tell C<Memoize> to use this normalizer this way:
calling the function with the other argument list, even if the
argument lists look different.
-The default normalizer just concatenates the arguments with C<$;> in
-between. This always works correctly for functions with only one
-string argument, and also when the arguments never contain C<$;>
-(which is normally character #28, control-\. ) However, it can
-confuse certain argument lists:
+The default normalizer just concatenates the arguments with character
+28 in between. (In ASCII, this is called FS or control-\.) This
+always works correctly for functions with only one string argument,
+and also when the arguments never contain character 28. However, it
+can confuse certain argument lists:
normalizer("a\034", "b")
normalizer("a", "\034b")
normalizer("a\034\034b")
-for example.
+for example.
Since hash keys are strings, the default normalizer will not
distinguish between C<undef> and the empty string. It also won't work
-when the function's arguments are references. For example, consider
-a function C<g> which gets two arguments: A number, and a reference to
+when the function's arguments are references. For example, consider a
+function C<g> which gets two arguments: A number, and a reference to
an array of numbers:
g(13, [1,2,3,4,5,6,7]);
The default normalizer will turn this into something like
-C<"13\024ARRAY(0x436c1f)">. That would be all right, except that a
+C<"13\034ARRAY(0x436c1f)">. That would be all right, except that a
subsequent array of numbers might be stored at a different location
even though it contains the same data. If this happens, C<Memoize>
will think that the arguments are different, even though they are
return $line;
}
-At 10:23, this function generates the tenth line of a data file; at
+At 10:23, this function generates the 10th line of a data file; at
3:45 PM it generates the 15th line instead. By default, C<Memoize>
will only see the $problem_type argument. To fix this, include the
current hour in the normalizer:
ordinary Perl hash variable. However, you might like to have the
values cached on the disk, so that they persist from one run of your
program to the next, or you might like to associate some other
-interesting semantics with the cached values.
+interesting semantics with the cached values.
There's a slight complication under the hood of C<Memoize>: There are
actually I<two> caches, one for scalar values and one for list values.
MEMORY
FAULT
MERGE
- HASH
+ HASH
or else it must be a reference to a list whose first element is one of
these four strings, such as C<[HASH, arguments...]>.
A typical example is:
- use DB_File;
+ use DB_File;
tie my %cache => 'DB_File', $filename, O_RDWR|O_CREAT, 0666;
memoize 'function', SCALAR_CACHE => [HASH => \%cache];
This option is B<strongly deprecated> and will be removed
in the B<next> release of C<Memoize>. Use the C<HASH> option instead.
- memoize ... [TIE, ARGS...]
+ memoize ... [TIE, PACKAGE, ARGS...]
is merely a shortcut for
- tie my %cache, ARGS...;
+ require PACKAGE;
+ tie my %cache, PACKAGE, ARGS...;
memoize ... [HASH => \%cache];
-
=item C<FAULT>
C<FAULT> means that you never expect to call the function in scalar
the real C<pi> function; it gets the value from the scalar cache.
Obviously, the second call to C<pi> is a waste of time, and storing
-its return value is a waste of space. Specifying C<LIST_CACHE
-=E<gt> MERGE> will make C<memoize> use the same cache for scalar and
-list context return values, so that the second call uses the scalar
-cache that was populated by the first call. C<pi> ends up being
-cvalled only once, and both subsequent calls return C<3> from the
-cache, regardless of the calling context.
+its return value is a waste of space. Specifying C<LIST_CACHE =E<gt>
+MERGE> will make C<memoize> use the same cache for scalar and list
+context return values, so that the second call uses the scalar cache
+that was populated by the first call. C<pi> ends up being called only
+once, and both subsequent calls return C<3> from the cache, regardless
+of the calling context.
Another use for C<MERGE> is when you want both kinds of return values
stored in the same disk file; this saves you from having to deal with
$SIG{INT} = sub { unmemoize 'function' };
-Thanks to Jonathan Roy for discovering a use for C<unmemoize>.
-
C<unmemoize> accepts a reference to, or the name of a previously
memoized function, and undoes whatever it did to provide the memoized
version in the first place, including making the name refer to the
=head2 C<flush_cache>
C<flush_cache(function)> will flush out the caches, discarding I<all>
-the cached data. The argument may be a funciton name or a reference
+the cached data. The argument may be a function name or a reference
to a function. For finer control over when data is discarded or
expired, see the documentation for C<Memoize::Expire>, included in
this package.
An alternative approach to cache flushing is to use the C<HASH> option
(see above) to request that C<Memoize> use a particular hash variable
as its cache. Then you can examine or modify the hash at any time in
-any way you desire.
+any way you desire. You may flush the cache by using C<%hash = ()>.
=head1 CAVEATS
Include the `nstore' option to have the C<Storable> database written
in `network order'. (See L<Storable> for more details about this.)
+The C<flush_cache()> function will raise a run-time error unless the
+tied package provides a C<CLEAR> method.
+
=head1 EXPIRATION SUPPORT
See Memoize::Expire, which is a plug-in module that adds expiration
The test suite is much better, but always needs improvement.
-There used to be some problem with the way C<goto &f> works under
-threaded Perl, because of the lexical scoping of C<@_>. This is a bug
-in Perl, and until it is resolved, Memoize won't work with these
-Perls. This is probably still the case, although I have not been able
-to try it out. If you encounter this problem, you can fix it by
-chopping the source code a little. Find the comment in the source
-code that says C<--- THREADED PERL COMMENT---> and comment out the
-active line and uncomment the commented one. Then try it again.
+There is some problem with the way C<goto &f> works under threaded
+Perl, perhaps because of the lexical scoping of C<@_>. This is a bug
+in Perl, and until it is resolved, memoized functions will see a
+slightly different C<caller()> and will perform a little more slowly
+on threaded perls than unthreaded perls.
Here's a bug that isn't my fault: Some versions of C<DB_File> won't
let you store data under a key of length 0. That means that if you
have a function C<f> which you memoized and the cache is in a
C<DB_File> database, then the value of C<f()> (C<f> called with no
arguments) will not be memoized. Let us all breathe deeply and repeat
-this mantra: ``Gosh, Keith, that sure was a stupid thing to do.''
+this mantra: ``Gosh, Keith, that sure was a stupid thing to do.'' If
+this is a big problem, you can write a tied hash class which is a
+front-end to C<DB_File> that prepends <x> to every key before storing
+it.
=head1 MAILING LIST
Perl Journal, issue #13. (This article is also included in the
Memoize distribution as `article.html'.)
+My upcoming book will discuss memoization (and many other fascinating
+topics) in tremendous detail. It will be published by Morgan Kaufmann
+in 2002, possibly under the title I<Perl Advanced Techniques
+Handbook>. It will also be available on-line for free. For more
+information, visit http://perl.plover.com/book/ .
+
To join a mailing list for announcements about C<Memoize>, send an
empty message to C<mjd-perl-memoize-request@plover.com>. This mailing
list is for announcements only and has extremely low traffic---about
-four messages per year.
+two messages per year.
=head1 COPYRIGHT AND LICENSE
Copyright 1998, 1999, 2000, 2001 by Mark Jason Dominus
This library is free software; you may redistribute it and/or modify
-it under the same terms as Perl itself.
+it under the same terms as Perl itself.
=head1 THANK YOU
Many thanks to Jonathan Roy for bug reports and suggestions, to
Michael Schwern for other bug reports and patches, to Mike Cariaso for
helping me to figure out the Right Thing to Do About Expiration, to
-Joshua Gerth, Joshua Chamas, Jonathan Roy, Mark D. Anderson, and
-Andrew Johnson for more suggestions about expiration, to Brent Powers
-for the Memoize::ExpireLRU module, to Ariel Scolnicov for delightful
-messages about the Fibonacci function, to Dion Almaer for
+Joshua Gerth, Joshua Chamas, Jonathan Roy (again), Mark D. Anderson,
+and Andrew Johnson for more suggestions about expiration, to Brent
+Powers for the Memoize::ExpireLRU module, to Ariel Scolnicov for
+delightful messages about the Fibonacci function, to Dion Almaer for
thought-provoking suggestions about the default normalizer, to Walt
Mankowski and Kurt Starsinic for much help investigating problems
under threaded Perl, to Alex Dudkevich for reporting the bug in
prototyped functions and for checking my patch, to Tony Bass for many
-helpful suggestions, to Philippe Verdret for enlightening discussion
-of Hook::PrePostCall, to Nat Torkington for advice I ignored, to Chris
+helpful suggestions, to Jonathan Roy (again) for finding a use for
+C<unmemoize()>, to Philippe Verdret for enlightening discussion of
+C<Hook::PrePostCall>, to Nat Torkington for advice I ignored, to Chris
Nandor for portability advice, to Randal Schwartz for suggesting the
'C<flush_cache> function, and to Jenda Krynicky for being a light in
the world.
Special thanks to Jarkko Hietaniemi, the 5.8.0 pumpking, for including
this module in the core and for his patient and helpful guidance
during the integration process.
+
=cut
# require 5.00556;
use Carp;
$DEBUG = 0;
-$VERSION = '0.65';
+$VERSION = '0.66';
# This package will implement expiration by prepending a fixed-length header
# to the font of the cached data. The format of the header will be:
# TIE => [Memoize::Expire, LIFETIME => sec, NUM_USES => n,
# TIE => [...] ]
+BEGIN {
+ eval {require Time::HiRes};
+ unless ($@) {
+ Time::HiRes->import('time');
+ }
+}
+
sub TIEHASH {
my ($package, %args) = @_;
my %cache;
sub FETCH {
$DEBUG and print STDERR " >> Fetch cached value for $_[1]\n";
my ($data, $last_access, $expire_time, $num_uses_left) = _get_item($_[0]{C}{$_[1]});
- $DEBUG and print STDERR " >> (ttl: ", ($expire_time-time), ", nuses: $num_uses_left)\n";
+ $DEBUG and print STDERR " >> (ttl: ", ($expire_time-time()), ", nuses: $num_uses_left)\n";
$num_uses_left--;
$last_access = time;
_set_header(@_, $data, $last_access, $expire_time, $num_uses_left);
1;
-# Below is the stub of documentation for your module. You better edit it!
-
=head1 NAME
Memoize::Expire - Plug-in module for automatic expiration of memoized values
use Memoize;
use Memoize::Expire;
- tie my %cache => 'Memoize::Expire',
+ tie my %cache => 'Memoize::Expire',
LIFETIME => $lifetime, # In seconds
NUM_USES => $n_uses;
Given a function argument and the corresponding function value, store
them into the cache.
+=item
+CLEAR
+
+(Optional.) Flush the cache completely.
+
=back
The user who wants the memoization cache to be expired according to
sub TIEHASH {
my ($package, %args) = @_;
- my $cache = $args{$HASH} || {};
+ my $cache = $args{HASH} || {};
bless $cache => $package;
}
You should always support a C<HASH> argument to C<TIEHASH> that ties
the underlying cache so that the user can specify that the cache is
also persistent or that it has some other interesting semantics. The
-example above demonstrates how to do this, as does C<Memozie::Expire>.
+example above demonstrates how to do this, as does C<Memoize::Expire>.
Another sample module, C<Memoize::Saves>, is included with this
package. It implements a policy that allows you to specify that
to the address below.
Number-of-uses is stored as a 16-bit unsigned integer, so can't exceed
-65535.
+65535.
Because of clock granularity, expiration times may occur up to one
second sooner than you expect. For example, suppose you store a value
certain day. Memoize will look at the clock and see 12:00:00. Then
9.01 seconds later, at 12:00:10.008 you try to read it back. Memoize
will look at the clock and see 12:00:10 and conclude that the value
-has expired. Solution: Build an expiration policy module that uses
-Time::HiRes to examine a clock with better granularity. Contributions
-are welcome. Send them to:
+has expired. This will probably not occur if if you have
+C<Time::HiRes> installed.
=head1 AUTHOR
I maintain a mailing list on which I occasionally announce new
versions of Memoize. The list is for announcements only, not
discussion. To join, send an empty message to
-mjd-perl-memoize-request@Plover.com.
+mjd-perl-memoize-request@Plover.com.
=cut
projects / p5sagit/p5-mst-13.2.git / commitdiff