--- /dev/null
+/* This file (config_H) is a sample config.h file. If you are unable
+ to successfully run Configure, copy this file to config.h and
+ edit it to suit your system.
+*/
+/*
+ * This file was produced by running the config_h.SH script, which
+ * gets its values from config.sh, which is generally produced by
+ * running Configure.
+ *
+ * Feel free to modify any of this as the need arises. Note, however,
+ * that running config_h.SH again will wipe out any changes you've made.
+ * For a more permanent change edit config.sh and rerun config_h.SH.
+ *
+ * $Id: Config_h.U,v 3.0.1.4 1995/09/25 09:10:49 ram Exp $
+ */
+
+/* Configuration time: Thu Feb 8 17:15:11 EST 1996
+ * Configured by: doughera
+ * Target system: sunos fractal 5.4 generic_101946-29 i86pc i386
+ */
+
+#ifndef _config_h_
+#define _config_h_
+
+/* CAT2:
+ * This macro catenates 2 tokens together.
+ */
+
+#define CAT2(a,b)a ## b
+#define CAT3(a,b,c)a ## b ## c
+#define CAT4(a,b,c,d)a ## b ## c ## d
+#define CAT5(a,b,c,d,e)a ## b ## c ## d ## e
+#define StGiFy(a)# a
+#define STRINGIFY(a)StGiFy(a)
+#define SCAT2(a,b)StGiFy(a) StGiFy(b)
+#define SCAT3(a,b,c)StGiFy(a) StGiFy(b) StGiFy(c)
+#define SCAT4(a,b,c,d)StGiFy(a) StGiFy(b) StGiFy(c) StGiFy(d)
+#define SCAT5(a,b,c,d,e)StGiFy(a) StGiFy(b) StGiFy(c) StGiFy(d) StGiFy(e)
+
+/* config-start */
+
+/* MEM_ALIGNBYTES:
+ * This symbol contains the number of bytes required to align a
+ * double. Usual values are 2, 4 and 8.
+ */
+#define MEM_ALIGNBYTES 8 /* config-skip */
+
+/* BIN:
+ * This symbol holds the path of the bin directory where the package will
+ * be installed. Program must be prepared to deal with ~name substitution.
+ */
+#define BIN "/_P9P_OBJTYPE/bin" /* */
+
+/* CPPSTDIN:
+ * This symbol contains the first part of the string which will invoke
+ * the C preprocessor on the standard input and produce to standard
+ * output. Typical value of "cc -E" or "/lib/cpp", but it can also
+ * call a wrapper. See CPPRUN.
+ */
+/* CPPMINUS:
+ * This symbol contains the second part of the string which will invoke
+ * the C preprocessor on the standard input and produce to standard
+ * output. This symbol will have the value "-" if CPPSTDIN needs a minus
+ * to specify standard input, otherwise the value is "".
+ */
+#define CPPSTDIN "cpp"
+#define CPPMINUS ""
+
+/* HAS_ALARM:
+ * This symbol, if defined, indicates that the alarm routine is
+ * available.
+ */
+#define HAS_ALARM /**/
+
+/* HASATTRIBUTE:
+ * This symbol indicates the C compiler can check for function attributes,
+ * such as printf formats. This is normally only supported by GNU cc.
+ */
+#undef HASATTRIBUTE /* config-skip*/
+#ifndef HASATTRIBUTE
+#define __attribute__(_arg_)
+#endif
+
+/* HAS_BCMP:
+ * This symbol is defined if the bcmp() routine is available to
+ * compare blocks of memory.
+ */
+#define HAS_BCMP /**/
+
+/* HAS_BCOPY:
+ * This symbol is defined if the bcopy() routine is available to
+ * copy blocks of memory.
+ */
+#define HAS_BCOPY /**/
+
+/* HAS_BZERO:
+ * This symbol is defined if the bzero() routine is available to
+ * set a memory block to 0.
+ */
+#define HAS_BZERO /**/
+
+/* CASTI32:
+ * This symbol is defined if the C compiler can cast negative
+ * or large floating point numbers to 32-bit ints.
+ */
+#undef CASTI32 /**/
+
+/* CASTNEGFLOAT:
+ * This symbol is defined if the C compiler can cast negative
+ * numbers to unsigned longs, ints and shorts.
+ */
+/* CASTFLAGS:
+ * This symbol contains flags that say what difficulties the compiler
+ * has casting odd floating values to unsigned long:
+ * 0 = ok
+ * 1 = couldn't cast < 0
+ * 2 = couldn't cast >= 0x80000000
+ * 4 = couldn't cast in argument expression list
+ */
+#define CASTNEGFLOAT /**/
+#if _P9P_OBJTYPE == 386
+# define CASTFLAGS 2 /**/ /* config-skip */
+#else
+# define CASTFLAGS 0 /**/ /* config-skip */
+#endif
+
+/* HAS_CHOWN:
+ * This symbol, if defined, indicates that the chown routine is
+ * available.
+ */
+#undef HAS_CHOWN /**/
+
+/* HAS_CHROOT:
+ * This symbol, if defined, indicates that the chroot routine is
+ * available.
+ */
+#undef HAS_CHROOT /**/
+
+/* HAS_CHSIZE:
+ * This symbol, if defined, indicates that the chsize routine is available
+ * to truncate files. You might need a -lx to get this routine.
+ */
+#undef HAS_CHSIZE /**/
+
+/* VOID_CLOSEDIR:
+ * This symbol, if defined, indicates that the closedir() routine
+ * does not return a value.
+ */
+#define VOID_CLOSEDIR /**/
+
+/* HASCONST:
+ * This symbol, if defined, indicates that this C compiler knows about
+ * the const type. There is no need to actually test for that symbol
+ * within your programs. The mere use of the "const" keyword will
+ * trigger the necessary tests.
+ */
+#define HASCONST /**/
+
+/* HAS_CRYPT:
+ * This symbol, if defined, indicates that the crypt routine is available
+ * to encrypt passwords and the like.
+ */
+/* #define HAS_CRYPT /**/
+
+/* HAS_CUSERID:
+ * This symbol, if defined, indicates that the cuserid routine is
+ * available to get character login names.
+ */
+#define HAS_CUSERID /**/
+
+/* HAS_DBL_DIG:
+ * This symbol, if defined, indicates that this system's <float.h>
+ * or <limits.h> defines the symbol DBL_DIG, which is the number
+ * of significant digits in a double precision number. If this
+ * symbol is not defined, a guess of 15 is usually pretty good.
+ */
+#undef HAS_DBL_DIG /* */
+
+/* HAS_DIFFTIME:
+ * This symbol, if defined, indicates that the difftime routine is
+ * available.
+ */
+#define HAS_DIFFTIME /**/
+
+/* HAS_DLERROR:
+ * This symbol, if defined, indicates that the dlerror routine is
+ * available to return a string describing the last error that
+ * occurred from a call to dlopen(), dlclose() or dlsym().
+ */
+#undef HAS_DLERROR /**/
+
+/* HAS_DUP2:
+ * This symbol, if defined, indicates that the dup2 routine is
+ * available to duplicate file descriptors.
+ */
+#define HAS_DUP2 /**/
+
+/* HAS_FCHMOD:
+ * This symbol, if defined, indicates that the fchmod routine is available
+ * to change mode of opened files. If unavailable, use chmod().
+ */
+#undef HAS_FCHMOD /**/
+
+/* HAS_FCHOWN:
+ * This symbol, if defined, indicates that the fchown routine is available
+ * to change ownership of opened files. If unavailable, use chown().
+ */
+#undef HAS_FCHOWN /**/
+
+/* HAS_FCNTL:
+ * This symbol, if defined, indicates to the C program that
+ * the fcntl() function exists.
+ */
+#define HAS_FCNTL /**/
+
+/* HAS_FGETPOS:
+ * This symbol, if defined, indicates that the fgetpos routine is
+ * available to get the file position indicator, similar to ftell().
+ */
+#define HAS_FGETPOS /**/
+
+/* FLEXFILENAMES:
+ * This symbol, if defined, indicates that the system supports filenames
+ * longer than 14 characters.
+ */
+#define FLEXFILENAMES /**/
+
+/* HAS_FLOCK:
+ * This symbol, if defined, indicates that the flock routine is
+ * available to do file locking.
+ */
+#undef HAS_FLOCK /**/
+
+/* HAS_FORK:
+ * This symbol, if defined, indicates that the fork routine is
+ * available.
+ */
+#define HAS_FORK /**/
+
+/* HAS_FSETPOS:
+ * This symbol, if defined, indicates that the fsetpos routine is
+ * available to set the file position indicator, similar to fseek().
+ */
+#define HAS_FSETPOS /**/
+
+/* HAS_GETGROUPS:
+ * This symbol, if defined, indicates that the getgroups() routine is
+ * available to get the list of process groups. If unavailable, multiple
+ * groups are probably not supported.
+ */
+#undef HAS_GETGROUPS /* config-skip */
+
+/* HAS_GETHOSTENT:
+ * This symbol, if defined, indicates that the gethostent routine is
+ * available to lookup host names in some data base or other.
+ */
+#undef HAS_GETHOSTENT /* config-skip */
+
+/* HAS_UNAME:
+ * This symbol, if defined, indicates that the C program may use the
+ * uname() routine to derive the host name. See also HAS_GETHOSTNAME
+ * and PHOSTNAME.
+ */
+#undef HAS_UNAME /**/
+
+/* HAS_GETLOGIN:
+ * This symbol, if defined, indicates that the getlogin routine is
+ * available to get the login name.
+ */
+#define HAS_GETLOGIN /**/
+
+/* HAS_GETPGRP:
+ * This symbol, if defined, indicates that the getpgrp routine is
+ * available to get the current process group.
+ */
+#define HAS_GETPGRP /**/
+
+/* HAS_GETPGRP2:
+ * This symbol, if defined, indicates that the getpgrp2() (as in DG/UX)
+ * routine is available to get the current process group.
+ */
+#undef HAS_GETPGRP2 /**/
+
+/* HAS_GETPPID:
+ * This symbol, if defined, indicates that the getppid routine is
+ * available to get the parent process ID.
+ */
+#define HAS_GETPPID /**/
+
+/* HAS_GETPRIORITY:
+ * This symbol, if defined, indicates that the getpriority routine is
+ * available to get a process's priority.
+ */
+#undef HAS_GETPRIORITY /**/
+
+/* HAS_HTONL:
+ * This symbol, if defined, indicates that the htonl() routine (and
+ * friends htons() ntohl() ntohs()) are available to do network
+ * order byte swapping.
+ */
+/* HAS_HTONS:
+ * This symbol, if defined, indicates that the htons() routine (and
+ * friends htonl() ntohl() ntohs()) are available to do network
+ * order byte swapping.
+ */
+/* HAS_NTOHL:
+ * This symbol, if defined, indicates that the ntohl() routine (and
+ * friends htonl() htons() ntohs()) are available to do network
+ * order byte swapping.
+ */
+/* HAS_NTOHS:
+ * This symbol, if defined, indicates that the ntohs() routine (and
+ * friends htonl() htons() ntohl()) are available to do network
+ * order byte swapping.
+ */
+#define HAS_HTONL /**/
+
+#define HAS_HTONS /**/
+
+#define HAS_NTOHL /**/
+
+#define HAS_NTOHS /**/
+
+/* HAS_ISASCII:
+ * This manifest constant lets the C program know that isascii
+ * is available.
+ */
+#undef HAS_ISASCII /**/
+
+/* HAS_KILLPG:
+ * This symbol, if defined, indicates that the killpg routine is available
+ * to kill process groups. If unavailable, you probably should use kill
+ * with a negative process number.
+ */
+#undef HAS_KILLPG /**/
+
+/* HAS_LINK:
+ * This symbol, if defined, indicates that the link routine is
+ * available to create hard links.
+ */
+#define HAS_LINK /**/
+
+/* HAS_LOCALECONV:
+ * This symbol, if defined, indicates that the localeconv routine is
+ * available for numeric and monetary formatting conventions.
+ */
+#define HAS_LOCALECONV /**/
+
+/* HAS_LOCKF:
+ * This symbol, if defined, indicates that the lockf routine is
+ * available to do file locking.
+ */
+#undef HAS_LOCKF /**/
+
+/* HAS_LSTAT:
+ * This symbol, if defined, indicates that the lstat routine is
+ * available to do file stats on symbolic links.
+ */
+#define HAS_LSTAT /**/
+
+/* HAS_MBLEN:
+ * This symbol, if defined, indicates that the mblen routine is available
+ * to find the number of bytes in a multibye character.
+ */
+#define HAS_MBLEN /**/
+
+/* HAS_MBSTOWCS:
+ * This symbol, if defined, indicates that the mbstowcs routine is
+ * available to covert a multibyte string into a wide character string.
+ */
+#define HAS_MBSTOWCS /**/
+
+/* HAS_MBTOWC:
+ * This symbol, if defined, indicates that the mbtowc routine is available
+ * to covert a multibyte to a wide character.
+ */
+#define HAS_MBTOWC /**/
+
+/* HAS_MEMCMP:
+ * This symbol, if defined, indicates that the memcmp routine is available
+ * to compare blocks of memory.
+ */
+#define HAS_MEMCMP /**/
+
+/* HAS_MEMCPY:
+ * This symbol, if defined, indicates that the memcpy routine is available
+ * to copy blocks of memory.
+ */
+#define HAS_MEMCPY /**/
+
+/* HAS_MEMMOVE:
+ * This symbol, if defined, indicates that the memmove routine is available
+ * to copy potentially overlapping blocks of memory. This should be used
+ * only when HAS_SAFE_BCOPY is not defined. If neither is there, roll your
+ * own version.
+ */
+#define HAS_MEMMOVE /**/
+
+/* HAS_MEMSET:
+ * This symbol, if defined, indicates that the memset routine is available
+ * to set blocks of memory.
+ */
+#define HAS_MEMSET /**/
+
+/* HAS_MKDIR:
+ * This symbol, if defined, indicates that the mkdir routine is available
+ * to create directories. Otherwise you should fork off a new process to
+ * exec /bin/mkdir.
+ */
+#define HAS_MKDIR /**/
+
+/* HAS_MKFIFO:
+ * This symbol, if defined, indicates that the mkfifo routine is
+ * available to create FIFOs. Otherwise, mknod should be able to
+ * do it for you. However, if mkfifo is there, mknod might require
+ * super-user privileges which mkfifo will not.
+ */
+#define HAS_MKFIFO /**/
+
+/* HAS_MKTIME:
+ * This symbol, if defined, indicates that the mktime routine is
+ * available.
+ */
+#define HAS_MKTIME /**/
+
+/* HAS_MSG:
+ * This symbol, if defined, indicates that the entire msg*(2) library is
+ * supported (IPC mechanism based on message queues).
+ */
+#undef HAS_MSG /**/
+
+/* HAS_NICE:
+ * This symbol, if defined, indicates that the nice routine is
+ * available.
+ */
+#undef HAS_NICE /**/
+
+/* HAS_OPEN3:
+ * This manifest constant lets the C program know that the three
+ * argument form of open(2) is available.
+ */
+#define HAS_OPEN3 /**/
+
+/* HAS_PATHCONF:
+ * This symbol, if defined, indicates that pathconf() is available
+ * to determine file-system related limits and options associated
+ * with a given filename.
+ */
+/* HAS_FPATHCONF:
+ * This symbol, if defined, indicates that pathconf() is available
+ * to determine file-system related limits and options associated
+ * with a given open file descriptor.
+ */
+#define HAS_PATHCONF /**/
+#define HAS_FPATHCONF /**/
+
+/* HAS_PAUSE:
+ * This symbol, if defined, indicates that the pause routine is
+ * available to suspend a process until a signal is received.
+ */
+#define HAS_PAUSE /**/
+
+/* HAS_PIPE:
+ * This symbol, if defined, indicates that the pipe routine is
+ * available to create an inter-process channel.
+ */
+#define HAS_PIPE /**/
+
+/* HAS_POLL:
+ * This symbol, if defined, indicates that the poll routine is
+ * available to poll active file descriptors.
+ */
+#undef HAS_POLL /**/
+
+/* HAS_READDIR:
+ * This symbol, if defined, indicates that the readdir routine is
+ * available to read directory entries. You may have to include
+ * <dirent.h>. See I_DIRENT.
+ */
+#define HAS_READDIR /**/
+
+/* HAS_SEEKDIR:
+ * This symbol, if defined, indicates that the seekdir routine is
+ * available. You may have to include <dirent.h>. See I_DIRENT.
+ */
+#undef HAS_SEEKDIR /**/
+
+/* HAS_TELLDIR:
+ * This symbol, if defined, indicates that the telldir routine is
+ * available. You may have to include <dirent.h>. See I_DIRENT.
+ */
+#undef HAS_TELLDIR /**/
+
+/* HAS_REWINDDIR:
+ * This symbol, if defined, indicates that the rewinddir routine is
+ * available. You may have to include <dirent.h>. See I_DIRENT.
+ */
+#define HAS_REWINDDIR /**/
+
+/* HAS_READLINK:
+ * This symbol, if defined, indicates that the readlink routine is
+ * available to read the value of a symbolic link.
+ */
+#define HAS_READLINK /**/
+
+/* HAS_RENAME:
+ * This symbol, if defined, indicates that the rename routine is available
+ * to rename files. Otherwise you should do the unlink(), link(), unlink()
+ * trick.
+ */
+#define HAS_RENAME /**/
+
+/* HAS_RMDIR:
+ * This symbol, if defined, indicates that the rmdir routine is
+ * available to remove directories. Otherwise you should fork off a
+ * new process to exec /bin/rmdir.
+ */
+#define HAS_RMDIR /**/
+
+/* HAS_SAFE_BCOPY:
+ * This symbol, if defined, indicates that the bcopy routine is available
+ * to copy potentially overlapping memory blocks. Otherwise you should
+ * probably use memmove() or memcpy(). If neither is defined, roll your
+ * own version.
+ */
+#undef HAS_SAFE_BCOPY /**/
+
+/* HAS_SAFE_MEMCPY:
+ * This symbol, if defined, indicates that the memcpy routine is available
+ * to copy potentially overlapping memory blocks. Otherwise you should
+ * probably use memmove() or memcpy(). If neither is defined, roll your
+ * own version.
+ */
+#undef HAS_SAFE_MEMCPY /**/
+
+/* HAS_SELECT:
+ * This symbol, if defined, indicates that the select routine is
+ * available to select active file descriptors. If the timeout field
+ * is used, <sys/time.h> may need to be included.
+ */
+#define HAS_SELECT /* config-skip */
+
+/* HAS_SEM:
+ * This symbol, if defined, indicates that the entire sem*(2) library is
+ * supported.
+ */
+#undef HAS_SEM /**/
+
+/* HAS_SETEGID:
+ * This symbol, if defined, indicates that the setegid routine is available
+ * to change the effective gid of the current program.
+ */
+#undef HAS_SETEGID /**/
+
+/* HAS_SETEUID:
+ * This symbol, if defined, indicates that the seteuid routine is available
+ * to change the effective uid of the current program.
+ */
+#undef HAS_SETEUID /**/
+
+/* HAS_SETLINEBUF:
+ * This symbol, if defined, indicates that the setlinebuf routine is
+ * available to change stderr or stdout from block-buffered or unbuffered
+ * to a line-buffered mode.
+ */
+#undef HAS_SETLINEBUF /**/
+
+/* HAS_SETLOCALE:
+ * This symbol, if defined, indicates that the setlocale routine is
+ * available to handle locale-specific ctype implementations.
+ */
+#define HAS_SETLOCALE /**/
+
+/* HAS_SETPGID:
+ * This symbol, if defined, indicates that the setpgid routine is
+ * available to set process group ID.
+ */
+#define HAS_SETPGID /**/
+
+/* HAS_SETPGRP:
+ * This symbol, if defined, indicates that the setpgrp routine is
+ * available to set the current process group.
+ */
+/* USE_BSDPGRP:
+ * This symbol, if defined, indicates that the BSD notion of process
+ * group is to be used. For instance, you have to say setpgrp(pid, pgrp)
+ * instead of the USG setpgrp().
+ */
+#undef HAS_SETPGRP /**/
+#undef USE_BSDPGRP /**/
+
+/* HAS_SETPGRP2:
+ * This symbol, if defined, indicates that the setpgrp2() (as in DG/UX)
+ * routine is available to set the current process group.
+ */
+#undef HAS_SETPGRP2 /**/
+
+/* HAS_SETPRIORITY:
+ * This symbol, if defined, indicates that the setpriority routine is
+ * available to set a process's priority.
+ */
+#undef HAS_SETPRIORITY /**/
+
+/* HAS_SETREGID:
+ * This symbol, if defined, indicates that the setregid routine is
+ * available to change the real and effective gid of the current
+ * process.
+ */
+/* HAS_SETRESGID:
+ * This symbol, if defined, indicates that the setresgid routine is
+ * available to change the real, effective and saved gid of the current
+ * process.
+ */
+#undef HAS_SETREGID /**/
+#undef HAS_SETRESGID /**/
+
+/* HAS_SETREUID:
+ * This symbol, if defined, indicates that the setreuid routine is
+ * available to change the real and effective uid of the current
+ * process.
+ */
+/* HAS_SETRESUID:
+ * This symbol, if defined, indicates that the setresuid routine is
+ * available to change the real, effective and saved uid of the current
+ * process.
+ */
+#undef HAS_SETREUID /**/
+#undef HAS_SETRESUID /**/
+
+/* HAS_SETRGID:
+ * This symbol, if defined, indicates that the setrgid routine is available
+ * to change the real gid of the current program.
+ */
+#undef HAS_SETRGID /**/
+
+/* HAS_SETRUID:
+ * This symbol, if defined, indicates that the setruid routine is available
+ * to change the real uid of the current program.
+ */
+#undef HAS_SETRUID /**/
+
+/* HAS_SETSID:
+ * This symbol, if defined, indicates that the setsid routine is
+ * available to set the process group ID.
+ */
+#define HAS_SETSID /**/
+
+/* HAS_SHM:
+ * This symbol, if defined, indicates that the entire shm*(2) library is
+ * supported.
+ */
+#undef HAS_SHM /**/
+
+/* Shmat_t:
+ * This symbol holds the return type of the shmat() system call.
+ * Usually set to 'void *' or 'char *'.
+ */
+/* HAS_SHMAT_PROTOTYPE:
+ * This symbol, if defined, indicates that the sys/shm.h includes
+ * a prototype for shmat(). Otherwise, it is up to the program to
+ * guess one. Shmat_t shmat _((int, Shmat_t, int)) is a good guess,
+ * but not always right so it should be emitted by the program only
+ * when HAS_SHMAT_PROTOTYPE is not defined to avoid conflicting defs.
+ */
+#undef Shmat_t /* config-skip */
+#undef HAS_SHMAT_PROTOTYPE /**/
+
+/* HAS_SIGACTION:
+ * This symbol, if defined, indicates that Vr4's sigaction() routine
+ * is available.
+ */
+#define HAS_SIGACTION /**/
+
+/* HAS_SOCKET:
+ * This symbol, if defined, indicates that the BSD socket interface is
+ * supported.
+ */
+/* HAS_SOCKETPAIR:
+ * This symbol, if defined, indicates that the BSD socketpair() call is
+ * supported.
+ */
+#define HAS_SOCKET /**/
+#define HAS_SOCKETPAIR /**/
+
+/* USE_STAT_BLOCKS:
+ * This symbol is defined if this system has a stat structure declaring
+ * st_blksize and st_blocks.
+ */
+#undef USE_STAT_BLOCKS /**/
+
+/* USE_STDIO_PTR:
+ * This symbol is defined if the _ptr and _cnt fields (or similar)
+ * of the stdio FILE structure can be used to access the stdio buffer
+ * for a file handle. If this is defined, then the FILE_ptr(fp)
+ * and FILE_cnt(fp) macros will also be defined and should be used
+ * to access these fields.
+ */
+/* USE_STDIO_BASE:
+ * This symbol is defined if the _base field (or similar) of the
+ * stdio FILE structure can be used to access the stdio buffer for
+ * a file handle. If this is defined, then the FILE_base(fp) macro
+ * will also be defined and should be used to access this field.
+ * Also, the FILE_bufsiz(fp) macro will be defined and should be used
+ * to determine the number of bytes in the buffer. USE_STDIO_BASE
+ * will never be defined unless USE_STDIO_PTR is.
+ */
+#undef USE_STDIO_PTR /**/
+#undef USE_STDIO_BASE /**/
+
+/* FILE_ptr:
+ * This macro is used to access the _ptr field (or equivalent) of the
+ * FILE structure pointed to by its argument. This macro will always be
+ * defined if USE_STDIO_PTR is defined.
+ */
+/* STDIO_PTR_LVALUE:
+ * This symbol is defined if the FILE_ptr macro can be used as an
+ * lvalue.
+ */
+/* FILE_cnt:
+ * This macro is used to access the _cnt field (or equivalent) of the
+ * FILE structure pointed to by its argument. This macro will always be
+ * defined if USE_STDIO_PTR is defined.
+ */
+/* STDIO_CNT_LVALUE:
+ * This symbol is defined if the FILE_cnt macro can be used as an
+ * lvalue.
+ */
+#ifdef USE_STDIO_PTR
+#define FILE_ptr(fp) ((fp)->_ptr)
+#define STDIO_PTR_LVALUE /**/
+#define FILE_cnt(fp) ((fp)->_cnt)
+#define STDIO_CNT_LVALUE /**/
+#endif
+
+/* FILE_base:
+ * This macro is used to access the _base field (or equivalent) of the
+ * FILE structure pointed to by its argument. This macro will always be
+ * defined if USE_STDIO_BASE is defined.
+ */
+/* FILE_bufsiz:
+ * This macro is used to determine the number of bytes in the I/O
+ * buffer pointed to by _base field (or equivalent) of the FILE
+ * structure pointed to its argument. This macro will always be defined
+ * if USE_STDIO_BASE is defined.
+ */
+#ifdef USE_STDIO_BASE
+#define FILE_base(fp) ((fp)->_base)
+#define FILE_bufsiz(fp) ((fp)->_cnt + (fp)->_ptr - (fp)->_base)
+#endif
+
+/* HAS_STRCHR:
+ * This symbol is defined to indicate that the strchr()/strrchr()
+ * functions are available for string searching. If not, try the
+ * index()/rindex() pair.
+ */
+/* HAS_INDEX:
+ * This symbol is defined to indicate that the index()/rindex()
+ * functions are available for string searching.
+ */
+#define HAS_STRCHR /**/
+#undef HAS_INDEX /**/
+
+/* HAS_STRCOLL:
+ * This symbol, if defined, indicates that the strcoll routine is
+ * available to compare strings using collating information.
+ */
+#define HAS_STRCOLL /**/
+
+/* USE_STRUCT_COPY:
+ * This symbol, if defined, indicates that this C compiler knows how
+ * to copy structures. If undefined, you'll need to use a block copy
+ * routine of some sort instead.
+ */
+#define USE_STRUCT_COPY /**/
+
+/* HAS_STRERROR:
+ * This symbol, if defined, indicates that the strerror routine is
+ * available to translate error numbers to strings. See the writeup
+ * of Strerror() in this file before you try to define your own.
+ */
+/* HAS_SYS_ERRLIST:
+ * This symbol, if defined, indicates that the sys_errlist array is
+ * available to translate error numbers to strings. The extern int
+ * sys_nerr gives the size of that table.
+ */
+/* Strerror:
+ * This preprocessor symbol is defined as a macro if strerror() is
+ * not available to translate error numbers to strings but sys_errlist[]
+ * array is there.
+ */
+#define HAS_STRERROR /**/
+#define HAS_SYS_ERRLIST /**/
+#define Strerror(e) strerror(e)
+
+/* HAS_STRXFRM:
+ * This symbol, if defined, indicates that the strxfrm() routine is
+ * available to transform strings.
+ */
+#define HAS_STRXFRM /**/
+
+/* HAS_SYMLINK:
+ * This symbol, if defined, indicates that the symlink routine is available
+ * to create symbolic links.
+ */
+#define HAS_SYMLINK /**/
+
+/* HAS_SYSCALL:
+ * This symbol, if defined, indicates that the syscall routine is
+ * available to call arbitrary system calls. If undefined, that's tough.
+ */
+#undef HAS_SYSCALL /**/
+
+/* HAS_SYSCONF:
+ * This symbol, if defined, indicates that sysconf() is available
+ * to determine system related limits and options.
+ */
+#define HAS_SYSCONF /**/
+
+/* HAS_SYSTEM:
+ * This symbol, if defined, indicates that the system routine is
+ * available to issue a shell command.
+ */
+#define HAS_SYSTEM /**/
+
+/* HAS_TCGETPGRP:
+ * This symbol, if defined, indicates that the tcgetpgrp routine is
+ * available to get foreground process group ID.
+ */
+#define HAS_TCGETPGRP /**/
+
+/* HAS_TCSETPGRP:
+ * This symbol, if defined, indicates that the tcsetpgrp routine is
+ * available to set foreground process group ID.
+ */
+#define HAS_TCSETPGRP /**/
+
+/* Time_t:
+ * This symbol holds the type returned by time(). It can be long,
+ * or time_t on BSD sites (in which case <sys/types.h> should be
+ * included).
+ */
+#define Time_t time_t /* Time type */
+
+/* HAS_TIMES:
+ * This symbol, if defined, indicates that the times() routine exists.
+ * Note that this became obsolete on some systems (SUNOS), which now
+ * use getrusage(). It may be necessary to include <sys/times.h>.
+ */
+#define HAS_TIMES /**/
+
+/* HAS_TRUNCATE:
+ * This symbol, if defined, indicates that the truncate routine is
+ * available to truncate files.
+ */
+#undef HAS_TRUNCATE /**/
+
+/* HAS_TZNAME:
+ * This symbol, if defined, indicates that the tzname[] array is
+ * available to access timezone names.
+ */
+#define HAS_TZNAME /**/
+
+/* HAS_UMASK:
+ * This symbol, if defined, indicates that the umask routine is
+ * available to set and get the value of the file creation mask.
+ */
+#define HAS_UMASK /**/
+
+/* HAS_VFORK:
+ * This symbol, if defined, indicates that vfork() exists.
+ */
+#undef HAS_VFORK /**/
+
+/* Signal_t:
+ * This symbol's value is either "void" or "int", corresponding to the
+ * appropriate return type of a signal handler. Thus, you can declare
+ * a signal handler using "Signal_t (*handler)()", and define the
+ * handler using "Signal_t handler(sig)".
+ */
+#define Signal_t void /* Signal handler's return type */
+
+/* HASVOLATILE:
+ * This symbol, if defined, indicates that this C compiler knows about
+ * the volatile declaration.
+ */
+#define HASVOLATILE /**/
+#ifndef HASVOLATILE
+#define volatile /* config-skip */
+#endif
+
+/* HAS_VPRINTF:
+ * This symbol, if defined, indicates that the vprintf routine is available
+ * to printf with a pointer to an argument list. If unavailable, you
+ * may need to write your own, probably in terms of _doprnt().
+ */
+/* USE_CHAR_VSPRINTF:
+ * This symbol is defined if this system has vsprintf() returning type
+ * (char*). The trend seems to be to declare it as "int vsprintf()". It
+ * is up to the package author to declare vsprintf correctly based on the
+ * symbol.
+ */
+#define HAS_VPRINTF /**/
+#define USE_CHAR_VSPRINTF /**/
+
+/* HAS_WAIT4:
+ * This symbol, if defined, indicates that wait4() exists.
+ */
+#undef HAS_WAIT4 /**/
+
+/* HAS_WAITPID:
+ * This symbol, if defined, indicates that the waitpid routine is
+ * available to wait for child process.
+ */
+#undef HAS_WAITPID /**/
+
+/* HAS_WCSTOMBS:
+ * This symbol, if defined, indicates that the wcstombs routine is
+ * available to convert wide character strings to multibyte strings.
+ */
+#define HAS_WCSTOMBS /**/
+
+/* HAS_WCTOMB:
+ * This symbol, if defined, indicates that the wctomb routine is available
+ * to covert a wide character to a multibyte.
+ */
+#define HAS_WCTOMB /**/
+
+/* Fpos_t:
+ * This symbol holds the type used to declare file positions in libc.
+ * It can be fpos_t, long, uint, etc... It may be necessary to include
+ * <sys/types.h> to get any typedef'ed information.
+ */
+#define Fpos_t fpos_t /* File position type */
+
+/* Gid_t:
+ * This symbol holds the return type of getgid() and the type of
+ * argument to setrgid() and related functions. Typically,
+ * it is the type of group ids in the kernel. It can be int, ushort,
+ * uid_t, etc... It may be necessary to include <sys/types.h> to get
+ * any typedef'ed information.
+ */
+#define Gid_t gid_t /* config-skip */
+
+/* Groups_t:
+ * This symbol holds the type used for the second argument to
+ * getgroups(). Usually, this is the same of gidtype, but
+ * sometimes it isn't. It can be int, ushort, uid_t, etc...
+ * It may be necessary to include <sys/types.h> to get any
+ * typedef'ed information. This is only required if you have
+ * getgroups().
+ */
+#ifdef HAS_GETGROUPS
+#define Groups_t gid_t /* Type for 2nd arg to getgroups() */
+#endif
+
+/* DB_Prefix_t:
+ * This symbol contains the type of the prefix structure element
+ * in the <db.h> header file. In older versions of DB, it was
+ * int, while in newer ones it is u_int32_t.
+ */
+/* DB_Hash_t:
+ * This symbol contains the type of the prefix structure element
+ * in the <db.h> header file. In older versions of DB, it was
+ * int, while in newer ones it is size_t.
+ */
+#define DB_Hash_t int /**/
+#define DB_Prefix_t int /**/
+
+/* I_DIRENT:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <dirent.h>. Using this symbol also triggers the definition
+ * of the Direntry_t define which ends up being 'struct dirent' or
+ * 'struct direct' depending on the availability of <dirent.h>.
+ */
+/* DIRNAMLEN:
+ * This symbol, if defined, indicates to the C program that the length
+ * of directory entry names is provided by a d_namlen field. Otherwise
+ * you need to do strlen() on the d_name field.
+ */
+/* Direntry_t:
+ * This symbol is set to 'struct direct' or 'struct dirent' depending on
+ * whether dirent is available or not. You should use this pseudo type to
+ * portably declare your directory entries.
+ */
+#define I_DIRENT /**/
+#undef DIRNAMLEN /**/
+#define Direntry_t struct dirent
+
+/* I_DLFCN:
+ * This symbol, if defined, indicates that <dlfcn.h> exists and should
+ * be included.
+ */
+#undef I_DLFCN /**/
+
+/* I_FCNTL:
+ * This manifest constant tells the C program to include <fcntl.h>.
+ */
+#define I_FCNTL /**/
+
+/* I_FLOAT:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <float.h> to get definition of symbols like DBL_MAX or
+ * DBL_MIN, i.e. machine dependent floating point values.
+ */
+#define I_FLOAT /**/
+
+/* I_GRP:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <grp.h>.
+ */
+#define I_GRP /**/
+
+/* I_LIMITS:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <limits.h> to get definition of symbols like WORD_BIT or
+ * LONG_MAX, i.e. machine dependant limitations.
+ */
+#define I_LIMITS /**/
+
+/* I_MATH:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <math.h>.
+ */
+#define I_MATH /**/
+
+/* I_MEMORY:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <memory.h>.
+ */
+#undef I_MEMORY /**/
+
+/* I_NDBM:
+ * This symbol, if defined, indicates that <ndbm.h> exists and should
+ * be included.
+ */
+#undef I_NDBM /**/
+
+/* I_NET_ERRNO:
+ * This symbol, if defined, indicates that <net/errno.h> exists and
+ * should be included.
+ */
+#undef I_NET_ERRNO /* config-skip */
+
+/* I_NETINET_IN:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <netinet/in.h>. Otherwise, you may try <sys/in.h>.
+ */
+#define I_NETINET_IN /* config-skip */
+
+/* I_PWD:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <pwd.h>.
+ */
+/* PWQUOTA:
+ * This symbol, if defined, indicates to the C program that struct passwd
+ * contains pw_quota.
+ */
+/* PWAGE:
+ * This symbol, if defined, indicates to the C program that struct passwd
+ * contains pw_age.
+ */
+/* PWCHANGE:
+ * This symbol, if defined, indicates to the C program that struct passwd
+ * contains pw_change.
+ */
+/* PWCLASS:
+ * This symbol, if defined, indicates to the C program that struct passwd
+ * contains pw_class.
+ */
+/* PWEXPIRE:
+ * This symbol, if defined, indicates to the C program that struct passwd
+ * contains pw_expire.
+ */
+/* PWCOMMENT:
+ * This symbol, if defined, indicates to the C program that struct passwd
+ * contains pw_comment.
+ */
+#define I_PWD /**/
+#undef PWQUOTA /**/
+#undef PWAGE /**/
+#undef PWCHANGE /**/
+#undef PWCLASS /**/
+#undef PWEXPIRE /**/
+#undef PWCOMMENT /**/
+
+/* I_STDDEF:
+ * This symbol, if defined, indicates that <stddef.h> exists and should
+ * be included.
+ */
+#define I_STDDEF /**/
+
+/* I_STDLIB:
+ * This symbol, if defined, indicates that <stdlib.h> exists and should
+ * be included.
+ */
+#define I_STDLIB /**/
+
+/* I_STRING:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <string.h> (USG systems) instead of <strings.h> (BSD systems).
+ */
+#define I_STRING /**/
+
+/* I_SYS_DIR:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <sys/dir.h>.
+ */
+#undef I_SYS_DIR /**/
+
+/* I_SYS_FILE:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <sys/file.h> to get definition of R_OK and friends.
+ */
+#undef I_SYS_FILE /**/
+
+/* I_SYS_IOCTL:
+ * This symbol, if defined, indicates that <sys/ioctl.h> exists and should
+ * be included. Otherwise, include <sgtty.h> or <termio.h>.
+ */
+#define I_SYS_IOCTL /**/
+
+/* I_SYS_NDIR:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <sys/ndir.h>.
+ */
+#undef I_SYS_NDIR /**/
+
+/* I_SYS_PARAM:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <sys/param.h>.
+ */
+#define I_SYS_PARAM /**/
+
+/* Plan 9: file position in Plan 9 is <select.h> */
+/* I_SYS_SELECT:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <sys/select.h> in order to get definition of struct timeval.
+ */
+#undef I_SYS_SELECT /**/
+
+/* I_SYS_TIMES:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <sys/times.h>.
+ */
+#define I_SYS_TIMES /**/
+
+/* I_SYS_TYPES:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <sys/types.h>.
+ */
+#define I_SYS_TYPES /**/
+
+/* I_SYS_UN:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <sys/un.h> to get UNIX domain socket definitions.
+ */
+#define I_SYS_UN /**/
+
+/* I_TERMIO:
+ * This symbol, if defined, indicates that the program should include
+ * <termio.h> rather than <sgtty.h>. There are also differences in
+ * the ioctl() calls that depend on the value of this symbol.
+ */
+/* I_TERMIOS:
+ * This symbol, if defined, indicates that the program should include
+ * the POSIX termios.h rather than sgtty.h or termio.h.
+ * There are also differences in the ioctl() calls that depend on the
+ * value of this symbol.
+ */
+/* I_SGTTY:
+ * This symbol, if defined, indicates that the program should include
+ * <sgtty.h> rather than <termio.h>. There are also differences in
+ * the ioctl() calls that depend on the value of this symbol.
+ */
+#undef I_TERMIO /**/
+#define I_TERMIOS /**/
+#undef I_SGTTY /**/
+
+/* Plan 9: P9 has both <time.h> and <sys/time.h> */
+/* I_TIME:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <time.h>.
+ */
+/* I_SYS_TIME:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <sys/time.h>.
+ */
+/* I_SYS_TIME_KERNEL:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <sys/time.h> with KERNEL defined.
+ */
+#define I_TIME /**/
+#define I_SYS_TIME /**/
+#undef I_SYS_TIME_KERNEL /**/
+
+/* I_UNISTD:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <unistd.h>.
+ */
+#define I_UNISTD /**/
+
+/* I_UTIME:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <utime.h>.
+ */
+#define I_UTIME /**/
+
+/* I_VFORK:
+ * This symbol, if defined, indicates to the C program that it should
+ * include vfork.h.
+ */
+#undef I_VFORK /**/
+
+/* Off_t:
+ * This symbol holds the type used to declare offsets in the kernel.
+ * It can be int, long, off_t, etc... It may be necessary to include
+ * <sys/types.h> to get any typedef'ed information.
+ */
+#define Off_t off_t /* <offset> type */
+
+/* Mode_t:
+ * This symbol holds the type used to declare file modes
+ * for systems calls. It is usually mode_t, but may be
+ * int or unsigned short. It may be necessary to include <sys/types.h>
+ * to get any typedef'ed information.
+ */
+#define Mode_t mode_t /* file mode parameter for system calls */
+
+/* CAN_PROTOTYPE:
+ * If defined, this macro indicates that the C compiler can handle
+ * function prototypes.
+ */
+/* _:
+ * This macro is used to declare function parameters for folks who want
+ * to make declarations with prototypes using a different style than
+ * the above macros. Use double parentheses. For example:
+ *
+ * int main _((int argc, char *argv[]));
+ */
+#define CAN_PROTOTYPE /**/
+#ifdef CAN_PROTOTYPE
+#define _(args) args /* config-skip */
+#else
+#define _(args) () /* config-skip */
+#endif
+
+/* RANDBITS:
+ * This symbol contains the number of bits of random number the rand()
+ * function produces. Usual values are 15, 16, and 31.
+ */
+#define RANDBITS 15 /**/
+
+/* SCRIPTDIR:
+ * This symbol holds the name of the directory in which the user wants
+ * to put publicly executable scripts for the package in question. It
+ * is often a directory that is mounted across diverse architectures.
+ * Programs must be prepared to deal with ~name expansion.
+ */
+#define SCRIPTDIR "/bin"
+
+/* Select_fd_set_t:
+ * This symbol holds the type used for the 2nd, 3rd, and 4th
+ * arguments to select. Usually, this is 'fd_set *', if HAS_FD_SET
+ * is defined, and 'int *' otherwise. This is only useful if you
+ * have select(), of course.
+ */
+#define Select_fd_set_t fd_set * /**/
+
+/* Size_t:
+ * This symbol holds the type used to declare length parameters
+ * for string functions. It is usually size_t, but may be
+ * unsigned long, int, etc. It may be necessary to include
+ * <sys/types.h> to get any typedef'ed information.
+ */
+#define Size_t size_t /* length paramater for string functions */
+
+/* SSize_t:
+ * This symbol holds the type used by functions that return
+ * a count of bytes or an error condition. It must be a signed type.
+ * It is usually ssize_t, but may be long or int, etc.
+ * It may be necessary to include <sys/types.h> or <unistd.h>
+ * to get any typedef'ed information.
+ * We will pick a type such that sizeof(SSize_t) == sizeof(Size_t).
+ */
+#define SSize_t ssize_t /* signed count of bytes */
+
+/* STDCHAR:
+ * This symbol is defined to be the type of char used in stdio.h.
+ * It has the values "unsigned char" or "char".
+ */
+#define STDCHAR char /**/
+
+/* Uid_t:
+ * This symbol holds the type used to declare user ids in the kernel.
+ * It can be int, ushort, uid_t, etc... It may be necessary to include
+ * <sys/types.h> to get any typedef'ed information.
+ */
+#define Uid_t uid_t /* UID type */
+
+/* PLAN9:
+ This symbol, if defined, indicates that the program is running under the
+* Plan 9 operating system.
+*/
+#define PLAN9 /**/
+
+#define OSNAME "plan9"
+
+#define BIN_SH "/bin/rc"
+
+/* MYMALLOC:
+ * This symbol, if defined, indicates that we're using our own malloc.
+ */
+#undef MYMALLOC /**/
+
+
+#undef VMS
+
+/* LOC_SED:
+ * This symbol holds the complete pathname to the sed program.
+ */
+#define LOC_SED "/bin/sed" /**/
+
+/* ARCHLIB_EXP:
+ * This symbol contains the ~name expanded version of ARCHLIB, to be used
+ * in programs that are not prepared to deal with ~ expansion at run-time.
+ */
+#define ARCHLIB_EXP "/_P9P_OBJTYPE/lib/perl/_P9P_VERSION"
+
+/* BYTEORDER:
+ * This symbol hold the hexadecimal constant defined in byteorder,
+ * i.e. 0x1234 or 0x4321, etc...
+ */
+#define BYTEORDER 0x1234 /* large digits for MSB */
+
+/* CSH:
+ * This symbol, if defined, indicates that the C-shell exists.
+ * If defined, contains the full pathname of csh.
+ */
+#undef CSH /**/
+
+/* DLSYM_NEEDS_UNDERSCORE:
+ * This symbol, if defined, indicates that we need to prepend an
+ * underscore to the symbol name before calling dlsym(). This only
+ * makes sense if you *have* dlsym, which we will presume is the
+ * case if you're using dl_dlopen.xs.
+ */
+#undef DLSYM_NEEDS_UNDERSCORE /* */
+
+/* SETUID_SCRIPTS_ARE_SECURE_NOW:
+ * This symbol, if defined, indicates that the bug that prevents
+ * setuid scripts from being secure is not present in this kernel.
+ */
+/* DOSUID:
+ * This symbol, if defined, indicates that the C program should
+ * check the script that it is executing for setuid/setgid bits, and
+ * attempt to emulate setuid/setgid on systems that have disabled
+ * setuid #! scripts because the kernel can't do it securely.
+ * It is up to the package designer to make sure that this emulation
+ * is done securely. Among other things, it should do an fstat on
+ * the script it just opened to make sure it really is a setuid/setgid
+ * script, it should make sure the arguments passed correspond exactly
+ * to the argument on the #! line, and it should not trust any
+ * subprocesses to which it must pass the filename rather than the
+ * file descriptor of the script to be executed.
+ */
+#define SETUID_SCRIPTS_ARE_SECURE_NOW /**/
+#undef DOSUID /**/
+
+/* Gconvert:
+ * This preprocessor macro is defined to convert a floating point
+ * number to a string without a trailing decimal point. This
+ * emulates the behavior of sprintf("%g"), but is sometimes much more
+ * efficient. If gconvert() is not available, but gcvt() drops the
+ * trailing decimal point, then gcvt() is used. If all else fails,
+ * a macro using sprintf("%g") is used. Arguments for the Gconvert
+ * macro are: value, number of digits, whether trailing zeros should
+ * be retained, and the output buffer.
+ * Possible values are:
+ * d_Gconvert='gconvert((x),(n),(t),(b))'
+ * d_Gconvert='gcvt((x),(n),(b))'
+ * d_Gconvert='sprintf((b),"%.*g",(n),(x))'
+ * The last two assume trailing zeros should not be kept.
+ */
+#define Gconvert(x,n,t,b) sprintf((b),"%.*g",(n),(x))
+
+/* Sigjmp_buf:
+ * This is the buffer type to be used with Sigsetjmp and Siglongjmp.
+ */
+/* Sigsetjmp:
+ * This macro is used in the same way as sigsetjmp(), but will invoke
+ * traditional setjmp() if sigsetjmp isn't available.
+ */
+/* Siglongjmp:
+ * This macro is used in the same way as siglongjmp(), but will invoke
+ * traditional longjmp() if siglongjmp isn't available.
+ */
+#define HAS_SIGSETJMP /**/ /* config-skip */
+#define Sigjmp_buf sigjmp_buf /* config-skip */
+#define Sigsetjmp(buf,save_mask) sigsetjmp(buf,save_mask) /* config-skip */
+#define Siglongjmp(buf,retval) siglongjmp(buf,retval) /* config-skip */
+
+/* USE_DYNAMIC_LOADING:
+ * This symbol, if defined, indicates that dynamic loading of
+ * some sort is available.
+ */
+#undef USE_DYNAMIC_LOADING /**/
+
+/* I_DBM:
+ * This symbol, if defined, indicates that <dbm.h> exists and should
+ * be included.
+ */
+/* I_RPCSVC_DBM:
+ * This symbol, if defined, indicates that <rpcsvc/dbm.h> exists and
+ * should be included.
+ */
+#undef I_DBM /**/
+#undef I_RPCSVC_DBM /**/
+
+/* I_LOCALE:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <locale.h>.
+ */
+#define I_LOCALE /**/
+
+/* I_SYS_STAT:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <sys/stat.h>.
+ */
+#define I_SYS_STAT /**/
+
+/* I_STDARG:
+ * This symbol, if defined, indicates that <stdarg.h> exists and should
+ * be included.
+ */
+/* I_VARARGS:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <varargs.h>.
+ */
+#define I_STDARG /**/
+#undef I_VARARGS /**/
+
+/* INTSIZE:
+ * This symbol contains the size of an int, so that the C preprocessor
+ * can make decisions based on it.
+ */
+#define INTSIZE 4 /**/
+
+/* Free_t:
+ * This variable contains the return type of free(). It is usually
+ * void, but occasionally int.
+ */
+/* Malloc_t:
+ * This symbol is the type of pointer returned by malloc and realloc.
+ */
+#define Malloc_t void * /**/
+#define Free_t void /**/
+
+/* VAL_O_NONBLOCK:
+ * This symbol is to be used during open() or fcntl(F_SETFL) to turn on
+ * non-blocking I/O for the file descriptor. Note that there is no way
+ * back, i.e. you cannot turn it blocking again this way. If you wish to
+ * alternatively switch between blocking and non-blocking, use the
+ * ioctl(FIOSNBIO) call instead, but that is not supported by all devices.
+ */
+/* VAL_EAGAIN:
+ * This symbol holds the errno error code set by read() when no data was
+ * present on the non-blocking file descriptor.
+ */
+/* RD_NODATA:
+ * This symbol holds the return code from read() when no data is present
+ * on the non-blocking file descriptor. Be careful! If EOF_NONBLOCK is
+ * not defined, then you can't distinguish between no data and EOF by
+ * issuing a read(). You'll have to find another way to tell for sure!
+ */
+/* EOF_NONBLOCK:
+ * This symbol, if defined, indicates to the C program that a read() on
+ * a non-blocking file descriptor will return 0 on EOF, and not the value
+ * held in RD_NODATA (-1 usually, in that case!).
+ */
+#define VAL_O_NONBLOCK O_NONBLOCK
+#define VAL_EAGAIN EAGAIN
+#define RD_NODATA -1
+#define EOF_NONBLOCK
+
+/* OLDARCHLIB_EXP:
+ * This symbol contains the ~name expanded version of OLDARCHLIB, to be
+ * used in programs that are not prepared to deal with ~ expansion at
+ * run-time.
+ */
+#undef OLDARCHLIB_EXP /**/
+
+/* PRIVLIB_EXP:
+ * This symbol contains the ~name expanded version of PRIVLIB, to be used
+ * in programs that are not prepared to deal with ~ expansion at run-time.
+ */
+#define PRIVLIB_EXP "/sys/lib/perl" /* */
+
+/* SIG_NAME:
+ * This symbol contains a list of signal names in order of
+ * signal number. This is intended
+ * to be used as a static array initialization, like this:
+ * char *sig_name[] = { SIG_NAME };
+ * The signals in the list are separated with commas, and each signal
+ * is surrounded by double quotes. There is no leading SIG in the signal
+ * name, i.e. SIGQUIT is known as "QUIT".
+ * Gaps in the signal numbers (up to NSIG) are filled in with NUMnn,
+ * etc., where nn is the actual signal number (e.g. NUM37).
+ * The signal number for sig_name[i] is stored in sig_num[i].
+ * The last element is 0 to terminate the list with a NULL. This
+ * corresponds to the 0 at the end of the sig_num list.
+ */
+/* SIG_NUM:
+ * This symbol contains a list of signal numbers, in the same order as the
+ * SIG_NAME list. It is suitable for static array initialization, as in:
+ * int sig_num[] = { SIG_NUM };
+ * The signals in the list are separated with commas, and the indices
+ * within that list and the SIG_NAME list match, so it's easy to compute
+ * the signal name from a number or vice versa at the price of a small
+ * dynamic linear lookup.
+ * Duplicates are allowed, but are moved to the end of the list.
+ * The signal number corresponding to sig_name[i] is sig_number[i].
+ * if (i < NSIG) then sig_number[i] == i.
+ * The last element is 0, corresponding to the 0 at the end of
+ * the sig_name list.
+ */
+#define SIG_NAME "ZERO","HUP","INT","QUIT","ILL","ABRT","FPE","KILL","SEGV","PIPE","ALRM","TERM","USR1","USR2","CHLD","CONT","STOP","TSTP","TTIN","TTOU",0 /* config-skip */
+#define SIG_NUM 0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,0 /* config-skip */
+
+/* SITELIB_EXP:
+ * This symbol contains the ~name expanded version of SITELIB, to be used
+ * in programs that are not prepared to deal with ~ expansion at run-time.
+ */
+#define SITELIB_EXP "/sys/lib/perl/site_perl" /* */
+
+/* SITEARCH_EXP:
+ * This symbol contains the ~name expanded version of SITEARCH, to be used
+ * in programs that are not prepared to deal with ~ expansion at run-time.
+ */
+#define SITEARCH_EXP "/_P9P_OBJTYPE/lib/perl/_P9P_VERSION/site_perl" /* */
+
+/* STARTPERL:
+ * This variable contains the string to put in front of a perl
+ * script to make sure (one hopes) that it runs with perl and not
+ * some shell.
+ */
+#define STARTPERL "#!/bin/perl" /**/
+
+/* VOIDFLAGS:
+ * This symbol indicates how much support of the void type is given by this
+ * compiler. What various bits mean:
+ *
+ * 1 = supports declaration of void
+ * 2 = supports arrays of pointers to functions returning void
+ * 4 = supports comparisons between pointers to void functions and
+ * addresses of void functions
+ * 8 = suports declaration of generic void pointers
+ *
+ * The package designer should define VOIDUSED to indicate the requirements
+ * of the package. This can be done either by #defining VOIDUSED before
+ * including config.h, or by defining defvoidused in Myinit.U. If the
+ * latter approach is taken, only those flags will be tested. If the
+ * level of void support necessary is not present, defines void to int.
+ */
+#ifndef VOIDUSED
+#define VOIDUSED 15
+#endif
+#define VOIDFLAGS 15
+#if (VOIDFLAGS & VOIDUSED) != VOIDUSED
+#define void int /* is void to be avoided? */ /* config-skip */
+#define M_VOID /* Xenix strikes again */ /* config-skip */
+#endif
+
+#endif
projects / p5sagit/p5-mst-13.2.git / commitdiff