wince/cecopy-lib.pl WinCE port
wince/comp.pl WinCE port
wince/compile.bat WinCE port
+wince/compile-all.bat WinCE port
wince/config.ce WinCE port
wince/config_H.ce WinCE port
wince/config_h.PL WinCE port
wince/include/arpa/inet.h WinCE port
wince/include/netdb.h WinCE port
wince/include/sys/socket.h WinCE port
-wince/include/sys/stat.h WinCE port
wince/Makefile.ce WinCE port
wince/makeico.pl WinCE port
+wince/makedist.pl WinCE port
wince/perl.rc WinCE port
wince/perllib.c WinCE port
wince/perlmain.c WinCE port
wince/wince.c WinCE port
wince/wince.h WinCE port
wince/wincesck.c WinCE port
-wince/xbuildall.ksh WinCE port
-wince/xdistclean.ksh WinCE port
-wince/xmakediffs.ksh WinCE port
writemain.SH Generate perlmain.c from miniperlmain.c+extensions
x2p/a2p.c Output of a2p.y run through byacc
x2p/a2p.h Global declarations
=head1 Description
-This file gives the instructions for building Perl5.6 and above for
+This file gives the instructions for building Perl5.8 and above for
WinCE. Please read and understand the terms under which this
software is distributed.
=head1 Build
This section describes the steps to be performed to build PerlCE.
+You may find additional and newer information about building perl
+for WincE using following URL:
+
+ http://perlce.sourceforge.net
+
+There should also be pre-built binaries there.
=head2 Tools & SDK
-For compiling, you need Microsoft Embedded Visual Tools, my
-celib-sources, my console-sources and a perl for win32.
+For compiling, you need following:
+
+=over 4
+
+=item * Microsoft Embedded Visual Tools
+
+=item * Microsoft Visual C++
+
+=item * Rainer Keuchel's celib-sources
+
+=item * Rainer Keuchel's console-sources
+
+=back
Needed source files can be downloaded via:
www.rainer-keuchel.de/wince/dirlist.html
-Some portions of the makefile need a shell for win32, rm, cp, mv,
-xmkdir (mkdir with a -p option). It also uses my cecopy program for
-copying files to the ce device.
-
=head2 Make
-Miniperl is not built. A pre-existent win32 perl is used.
+Please pay attention that starting from 5.8.0 miniperl *is* built
+and it facilitates in further building process. This means that
+in addition to compiler installation for mobile device you also need
+to have Microsoft Visual C++ installed as well.
-The paths for tools and additional libraries have to be changed in
-wince/makefile.ce.
+On the bright side, you do not need to edit any files from ./win32
+subdirectory. Normally you only need to edit ./wince/compile.bat
+to reflect your system and run it.
-Different ce targets can be specified with the TARGET macro.
+File ./wince/compile.bat is actually a wrapper to call
+nmake -f makefile.ce with appropriate parameters and it accepts extra
+parameters and forwards them to "nmake" command as additional
+arguments. You should pass target this way.
-Before you start, you need to build celib.dll and w32console.
-See instructions in these packages for building.
+Currently default target build all required perls, also there exists
+target 'dist' that prepares distribution file set. Other targets
+are currently in development stage.
+
+So, to prepare distribution you need to do following:
+
+=over 4
+
+=item * go to ./wince subdirectory
+
+=item * edit file compile.bat
-In the wince directory, type "nmake -f makefile.ce". This should
-build perl.exe and perl.dll. For building extension dlls,
-type "nmake -f makefile.ce dlls"
+=item * run
+ compile.bat
-When building ext dlls, you get lots of macro redefinition
-errors. Just ignore them.
+=item * run
+ compile.bat dist
-For further information, look in the text files in the wince
-sub-directory.
+=back
+
+Before you start, you need to build celib.dll and w32console.
+See instructions in these packages for building.
=head1 Acknowledgements
The port for Win32 was used as a reference.
-=head1 Author
+=head1 AUTHORS
Rainer Keuchel (keuchel@netwave.de)
+Vadim Konovalov (vkonovalov@spb.lucent.com)
+
* License or the Artistic License, as specified in the README file.
*
*/
-
#define ABORT() abort();
#ifndef SH_PATH
#if defined(WIN64) || defined(USE_LARGE_FILES)
#define Stat_t struct _stati64
#else
+#if defined(UNDER_CE)
+#define Stat_t struct xcestat
+#else
#define Stat_t struct stat
#endif
+#endif
/* USE_STAT_RDEV:
* This symbol is defined if this system has a stat structure declaring
# encodings and may see lower IO performance. You have been warned.
USE_PERLIO = define
+#
+# set this if you wish to use perl's malloc
+# This will make perl run few times faster
+# WARNING: Turning this on/off WILL break binary compatibility with extensions
+# you may have compiled with/without it.
+#
+PERL_MALLOC = define
+
NOOP = @echo
# keep this untouched!
#MACHINE=wince-x86em-palm-wce211
!endif
+# set this to your email address
+#
+#EMAIL =
+
+##################### CHANGE THESE ONLY IF YOU MUST #####################
+
######################################################################
# machines
MCFLAGS = -D _MT -D _DLL -DSH3 -D_SH3_ -DSHx -DPROCESSOR_SH3 \
-DPALM_SIZE -DPOCKET_SIZE \
-I $(CELIBDLLDIR)\inc
-MACH = -machine:mips
+MACH = -machine:sh3
SUBSYS = -subsystem:windowsce,3.00
CELIBPATH = $(CELIBDLLDIR)\$(MACHINE)-release
LDLIBPATH = -libpath:$(CELIBPATH)
!if "$(CFG)" == "RELEASE"
# -O2 and -Ot give internal compiler error in perl.c and lexer.
# Also the dll cannot be loaded by perl.exe...
-CECFLAGS = $(CECFLAGS)
+CECFLAGS = $(CECFLAGS) -O2 -Ot
!endif
RCDEFS = /l 0x407 /r /d "UNICODE" /d UNDER_CE=$(CEVersion) \
BUILDOPT = $(BUILDOPT) $(CECFLAGS)
-##################### CHANGE THESE ONLY IF YOU MUST #####################
!IF "$(CRYPT_SRC)$(CRYPT_LIB)" == ""
D_CRYPT = undef
PERL_MALLOC = undef
!ENDIF
-!IF "$(USE_IMP_SYS)" == "define"
-PERL_MALLOC = undef
-!ENDIF
-
!IF "$(USE_MULTI)" == ""
USE_MULTI = undef
!ENDIF
!ENDIF
!IF "$(CROSS_NAME)" == ""
-CROSS_NAME = wince
+CROSS_NAME = $(MACHINE)
!ENDIF
# new option - automatically defined in perl.h...
!if "$(CFG)" == "DEBUG"
LINK_FLAGS = $(LINK_FLAGS) -debug:full -pdb:none
+!else
+LINK_FLAGS = $(LINK_FLAGS) -release
!endif
OBJOUT_FLAG = -Fo
.\include\sys\socket.h \
.\win32.h
+CORE_H = $(CORE_NOCFG_H) .\config.h
+
+MICROCORE_OBJ = $(MICROCORE_SRC:.c=.obj)
+CORE_OBJ = $(MICROCORE_OBJ) $(EXTRACORE_SRC:.c=.obj)
+WIN32_OBJ = $(WIN32_SRC:.c=.obj)
+#WIN32_OBJ = $(WIN32_OBJ:.\=.\$(DLLDIR)\)
+MINICORE_OBJ = $(MICROCORE_OBJ:..\=.\$(DLLDIR)\) \
+ $(MINIDIR)\miniperlmain$(o) \
+ $(MINIDIR)\perlio$(o)
+MINIWIN32_OBJ = $(WIN32_OBJ:.\=.\$(DLLDIR)\)
+MINI_OBJ = $(MINICORE_OBJ) $(MINIWIN32_OBJ)
+DLL_OBJ = $(DLL_SRC:.c=.obj)
+X2P_OBJ = $(X2P_SRC:.c=.obj)
+
+PERLDLL_OBJ = $(CORE_OBJ)
+PERLEXE_OBJ = perlmain$(o)
+
+PERLDLL_OBJ = $(PERLDLL_OBJ) $(WIN32_OBJ) $(DLL_OBJ)
+#PERLEXE_OBJ = $(PERLEXE_OBJ) $(WIN32_OBJ) $(DLL_OBJ)
+
!IF "$(USE_SETARGV)" != ""
SETARGV_OBJ = setargv$(o)
!ENDIF
Sys/Hostname
STATIC_EXT = DynaLoader
-NONXS_EXT = Errno
DYNALOADER = $(EXTDIR)\DynaLoader\DynaLoader
-SOCKET = $(EXTDIR)\Socket\Socket
-IO = $(EXTDIR)\IO\IO
-DUMPER = $(EXTDIR)\Data\Dumper\Dumper
-#
-FCNTL = $(EXTDIR)\Fcntl\Fcntl
-OPCODE = $(EXTDIR)\Opcode\Opcode
-SDBM_FILE = $(EXTDIR)\SDBM_File\SDBM_File
-POSIX = $(EXTDIR)\POSIX\POSIX
-ATTRS = $(EXTDIR)\attrs\attrs
-THREAD = $(EXTDIR)\Thread\Thread
-B = $(EXTDIR)\B\B
-RE = $(EXTDIR)\re\re
-ERRNO = $(EXTDIR)\Errno\Errno
-PEEK = $(EXTDIR)\Devel\Peek\Peek
-BYTELOADER = $(EXTDIR)\ByteLoader\ByteLoader
-DPROF = $(EXTDIR)\Devel\DProf\DProf
-GLOB = $(EXTDIR)\File\Glob\Glob
-HOSTNAME = $(EXTDIR)\Sys\Hostname\Hostname
-SOCKET_DLL = $(AUTODIR)\Socket\Socket.dll
-FCNTL_DLL = $(AUTODIR)\Fcntl\Fcntl.dll
-OPCODE_DLL = $(AUTODIR)\Opcode\Opcode.dll
-SDBM_FILE_DLL = $(AUTODIR)\SDBM_File\SDBM_File.dll
-IO_DLL = $(AUTODIR)\IO\IO.dll
-POSIX_DLL = $(AUTODIR)\POSIX\POSIX.dll
-ATTRS_DLL = $(AUTODIR)\attrs\attrs.dll
-THREAD_DLL = $(AUTODIR)\Thread\Thread.dll
-B_DLL = $(AUTODIR)\B\B.dll
-DUMPER_DLL = $(AUTODIR)\Data\Dumper\Dumper.dll
-PEEK_DLL = $(AUTODIR)\Devel\Peek\Peek.dll
-RE_DLL = $(AUTODIR)\re\re.dll
-BYTELOADER_DLL = $(AUTODIR)\ByteLoader\ByteLoader.dll
-DPROF_DLL = $(AUTODIR)\Devel\DProf\DProf.dll
-GLOB_DLL = $(AUTODIR)\File\Glob\Glob.dll
-HOSTNAME_DLL = $(AUTODIR)\Sys\Hostname\Hostname.dll
ERRNO_PM = $(LIBDIR)\Errno.pm
-EXTENSION_C = \
- $(SOCKET).c \
- $(FCNTL).c \
- $(OPCODE).c \
- $(SDBM_FILE).c \
- $(IO).c \
- $(POSIX).c \
- $(ATTRS).c \
- $(THREAD).c \
- $(RE).c \
- $(DUMPER).c \
- $(PEEK).c \
- $(B).c \
- $(BYTELOADER).c \
- $(DPROF).c \
- $(GLOB).c \
- $(HOSTNAME).c
-
-EXTENSION_DLL = \
- $(SOCKET_DLL) \
- $(FCNTL_DLL) \
- $(OPCODE_DLL) \
- $(SDBM_FILE_DLL)\
- $(IO_DLL) \
- $(POSIX_DLL) \
- $(ATTRS_DLL) \
- $(DUMPER_DLL) \
- $(PEEK_DLL) \
- $(B_DLL) \
- $(RE_DLL) \
- $(THREAD_DLL) \
- $(BYTELOADER_DLL) \
- $(DPROF_DLL) \
- $(GLOB_DLL) \
- $(HOSTNAME_DLL)
EXTENSION_PM = \
$(ERRNO_PM)
"CC=$(CC)" \
"ccflags=$(OPTIMIZE) $(DEFINES) $(BUILDOPT)" \
"cf_by=Rainer Keuchel" \
- "cf_email=coyxc@rainer-keuchel.de" \
+ "cf_email=$(EMAIL)" \
"d_crypt=$(D_CRYPT)" \
"d_mymalloc=$(PERL_MALLOC)" \
"libs=$(LIBFILES)" \
"make=nmake" \
"static_ext=$(STATIC_EXT)" \
"dynamic_ext=$(DYNAMIC_EXT)" \
- "nonxs_ext=$(NONXS_EXT)" \
"useithreads=$(USE_ITHREADS)" \
"usemultiplicity=$(USE_MULTI)" \
"useperlio=$(USE_PERLIO)" \
#----------------------------------------------------------------------------------
Extensions: ..\win32\buildext.pl $(PERLDEP) $(CONFIGPM)
$(HPERL) -I..\lib -I..\win32 -MCross=$(CROSS_NAME) ..\win32\buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) \
- !File/Glob !POSIX !Time/HiRes
+ !POSIX !Time/HiRes
Extensions_clean:
-if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) clean
#----------------------------------------------------------------------------------
-$(DUMPER_DLL): $(PERLEXE) $(DUMPER).xs
- cd $(EXTDIR)\Data\$(*B)
- $(HPERL) -I..\..\..\lib -MCross Makefile.PL PERL_CORE=1 INSTALLDIRS=perl
- $(MAKE)
- cd ..\..\..\wince
-
-$(DPROF_DLL): $(PERLEXE) $(DPROF).xs
- cd $(EXTDIR)\Devel\$(*B)
- $(HPERL) -I..\..\..\lib -MCross Makefile.PL PERL_CORE=1 INSTALLDIRS=perl
- $(MAKE)
- cd ..\..\..\wince
-
-$(GLOB_DLL): $(PERLEXE) $(GLOB).xs
- cd $(EXTDIR)\File\$(*B)
- $(HPERL) -I..\..\..\lib -MCross Makefile.PL PERL_CORE=1 INSTALLDIRS=perl
- $(MAKE)
- cd ..\..\..\wince
-
-$(PEEK_DLL): $(PERLEXE) $(PEEK).xs
- cd $(EXTDIR)\Devel\$(*B)
- $(HPERL) -I..\..\..\lib -MCross Makefile.PL PERL_CORE=1 INSTALLDIRS=perl
- $(MAKE)
- cd ..\..\..\wince
-
-$(RE_DLL): $(PERLEXE) $(RE).xs
- cd $(EXTDIR)\$(*B)
- $(HPERL) -I..\..\lib -MCross Makefile.PL PERL_CORE=1 INSTALLDIRS=perl
- $(MAKE)
- cd ..\..\wince
-
-$(B_DLL): $(PERLEXE) $(B).xs
- cd $(EXTDIR)\$(*B)
- $(HPERL) -I..\..\lib -MCross Makefile.PL PERL_CORE=1 INSTALLDIRS=perl
- $(MAKE)
- cd ..\..\wince
-
-$(THREAD_DLL): $(PERLEXE) $(THREAD).xs
- cd $(EXTDIR)\$(*B)
- $(HPERL) -I..\..\lib -MCross Makefile.PL PERL_CORE=1 INSTALLDIRS=perl
- $(MAKE)
- cd ..\..\wince
-
-$(ATTRS_DLL): $(PERLEXE) $(ATTRS).xs
- cd $(EXTDIR)\$(*B)
- $(HPERL) -I..\..\lib -MCross Makefile.PL PERL_CORE=1 INSTALLDIRS=perl
- $(MAKE)
- cd ..\..\wince
-
-$(POSIX_DLL): $(PERLEXE) $(POSIX).xs
- cd $(EXTDIR)\$(*B)
- $(HPERL) -I..\..\lib -MCross Makefile.PL PERL_CORE=1 INSTALLDIRS=perl
- $(MAKE)
- cd ..\..\wince
-
-$(IO_DLL): $(PERLEXE) $(IO).xs
- cd $(EXTDIR)\$(*B)
- $(HPERL) -I..\..\lib -MCross Makefile.PL PERL_CORE=1 INSTALLDIRS=perl
- $(MAKE)
- cd ..\..\wince
-
-$(SDBM_FILE_DLL) : $(PERLEXE) $(SDBM_FILE).xs
- cd $(EXTDIR)\$(*B)
- $(HPERL) -I..\..\lib -MCross Makefile.PL PERL_CORE=1 INSTALLDIRS=perl
- $(MAKE)
- cd ..\..\wince
-
-$(FCNTL_DLL): $(PERLEXE) $(FCNTL).xs
- cd $(EXTDIR)\$(*B)
- $(HPERL) -I..\..\lib -MCross Makefile.PL PERL_CORE=1 INSTALLDIRS=perl
- $(MAKE)
- cd ..\..\wince
-
-$(OPCODE_DLL): $(PERLEXE) $(OPCODE).xs
- cd $(EXTDIR)\$(*B)
- $(HPERL) -I..\..\lib -MCross Makefile.PL PERL_CORE=1 INSTALLDIRS=perl
- $(MAKE)
- cd ..\..\wince
-
-$(SOCKET_DLL): $(PERLEXE) $(SOCKET).xs
- cd $(EXTDIR)\$(*B)
- $(HPERL) -I..\..\lib -MCross Makefile.PL PERL_CORE=1 INSTALLDIRS=perl
- $(MAKE)
- cd ..\..\wince
-
-$(HOSTNAME_DLL): $(PERLEXE) $(HOSTNAME).xs
- cd $(EXTDIR)\Sys\$(*B)
- $(HPERL) -I..\..\..\lib -MCross Makefile.PL PERL_CORE=1 INSTALLDIRS=perl
- $(MAKE)
- cd ..\..\..\wince
-
-$(BYTELOADER_DLL): $(PERLEXE) $(BYTELOADER).xs
- cd $(EXTDIR)\$(*B)
- $(HPERL) -I..\..\lib -MCross Makefile.PL PERL_CORE=1 INSTALLDIRS=perl
- $(MAKE)
- cd ..\..\wince
-
-$(ERRNO_PM): $(PERLEXE) $(ERRNO)_pm.PL
- cd $(EXTDIR)\$(*B)
- $(HPERL) -I..\..\lib -MCross Makefile.PL PERL_CORE=1 INSTALLDIRS=perl
- $(MAKE)
- cd ..\..\wince
-
$(PERLEXE_RES): perl.rc perl.ico
rc $(RCDEFS) perl.rc
-rm -f ../config.sh ../lib/Config.pm
-rm -f config.h perl.res
-!IF "$(MACHINE)" == "wince-sh3-hpc"
-
-install_perlexe: $(PERLEXE)
- cedel /speicherkarte2/bin/perl.exe
- $(CECOPY) pc:../perl.exe ce:$(INSTALL_ROOT)/bin
-
-install_perldll: $(PERLDLL)
- cedel /speicherkarte2/bin/perl$(PV).dll
- $(CECOPY) pc:../perl$(PV).dll ce:/speicherkarte2/bin
-
-install_perl: install_perlexe install_perldll
-
-test_perl:
- $(CECOPY) pc:test.pl ce:/speicherkarte2/bin
- ceexec /speicherkarte2/bin/perl.exe /speicherkarte2/bin/test.pl
-
-install_lib: ../lib/Config.pm
- $(CECOPY) pc:../lib/Config.pm ce:$(INSTALL_ROOT)/lib
-
-!ELSEIF "$(MACHINE)" == "wince-arm-hpc"
-
-install_perlexe: $(PERLEXE)
- -cedel /speicherkarte/bin/perl.exe
- $(CECOPY) pc:$(MACHINE)/perl.exe ce:$(INSTALL_ROOT)/bin
-
-install_perldll: $(PERLDLL)
- -cedel /speicherkarte/bin/perl$(PV).dll
- $(CECOPY) pc:$(MACHINE)/perl$(PV).dll ce:$(INSTALL_ROOT)/bin
-
-install_perl: install_perlexe install_perldll
-
-test_perl:
- $(CECOPY) pc:test.pl ce:/speicherkarte/bin
- ceexec /speicherkarte/bin/perl.exe /speicherkarte/bin/test.pl
-
-install_lib: ../lib/Config.pm
- $(CECOPY) pc:../lib/Config.pm ce:$(INSTALL_ROOT)/lib
-
-!ELSEIF "$(MACHINE)" == "wince-mips-hpc"
-
-install_perlexe: $(PERLEXE)
- $(CECOPY) pc:../perl.exe ce:$(INSTALL_ROOT)/bin
-
-install_perldll: $(PERLDLL)
- $(CECOPY) pc:../perl$(PV).dll ce:$(INSTALL_ROOT)/bin
-
-install_perl: install_perlexe install_perldll
-
-test_perl:
- $(CECOPY) pc:test.pl ce:/netzwerk/compaq/bin
- ceexec /netzwerk/compaq/bin/perl.exe $(INSTALL_ROOT)/test.pl
-
-install_lib: ../lib/Config.pm
- $(CECOPY) pc:../lib/Config.pm ce:$(INSTALL_ROOT)/lib
-
-!ELSEIF "$(MACHINE)" == "wince-x86em-pocket"
-
-install_lib:
- ftpcopy ../lib/Config.pm ftp!ftp@localhost:/perl/lib
- ftpcopy ../lib/Exporter.pm ftp!ftp@localhost:/perl/lib
- ftpcopy ../lib/Exporter/Heavy.pm ftp!ftp@localhost:/perl/lib/Exporter
-
-install_perlexe: $(PERLEXE)
- $(CECOPY) pc:../perl.exe ce:$(INSTALL_ROOT)/bin
-
-install_perldll: $(PERLDLL)
- $(CECOPY) pc:../perl$(PV).dll ce:$(INSTALL_ROOT)/bin
-
-install_perl: install_perlexe install_perldll
-
-test_perl:
- echo Not yet
-!ENDIF
-
-
XDLLOBJS = \
$(DLLDIR)\av.obj \
$(DLLDIR)\deb.obj \
$(DLLDIR)\xsutils.obj \
$(DLLDIR)\perllib.obj \
$(DLLDIR)\DynaLoader.obj
+!IF "$(PERL_MALLOC)" == "define"
+XDLLOBJS = $(XDLLOBJS) $(DLLDIR)\malloc.obj
+!ENDIF
{$(SRCDIR)}.c{$(DLLDIR)}.obj:
$(CC) -c $(CFLAGS) -DPERL_EXTERNAL_GLOB -Fo$(DLLDIR)\ $<
$(PERLEXE) : $(PERLDLL) $(CONFIGPM) $(XPERLEXEOBJS) $(PERLEXE_RES) $(STARTOBJS)
$(XCOPY) $(MACHINE)\*.lib $(XCOREDIR)
- $(LINK32) $(SUBSYS) $(LDLIBPATH) \
+ $(LINK32) $(SUBSYS) $(LDLIBPATH) \
-entry:wWinMainCRTStartup \
-out:$(MACHINE)\perl.exe \
-stack:0x100000 $(LINK_FLAGS) $(STARTOBJS) $(XPERLEXEOBJS) \
$(CECOPY) "pc:../xlib/$(CROSS_NAME)/Config.pm" "ce:$(INSTALL_ROOT)/lib"
!endif
+dist: all
+ $(HPERL) -I..\lib -MCross=$(CROSS_NAME) makedist.pl --distdir=dist-$(CROSS_NAME)
+
perl.ico:
$(HPERL) makeico.pl
--- /dev/null
+call compile.bat MACHINE=wince-arm-hpc-wce300 \r
+call compile.bat MACHINE=wince-arm-hpc-wce211 \r
+call compile.bat MACHINE=wince-sh3-hpc-wce211 \r
+call compile.bat MACHINE=wince-mips-hpc-wce211 \r
+call compile.bat MACHINE=wince-sh3-hpc-wce200 \r
+call compile.bat MACHINE=wince-mips-hpc-wce200 \r
+call compile.bat MACHINE=wince-arm-pocket-wce300 \r
+call compile.bat MACHINE=wince-mips-pocket-wce300 \r
+call compile.bat MACHINE=wince-sh3-pocket-wce300 \r
+call compile.bat MACHINE=wince-x86em-pocket-wce300\r
+call compile.bat MACHINE=wince-mips-palm-wce211 \r
+call compile.bat MACHINE=wince-sh3-palm-wce211 \r
+call compile.bat MACHINE=wince-x86em-palm-wce211 \r
set ARG-1=PV=
set ARG-2=INST_VER=
-set ARG-3=INSTALL_ROOT=\Storage Card\perl58
+set ARG-3=INSTALL_ROOT=\Storage Card\perl-tests\perl@19041
set ARG-4=WCEROOT=%SDKROOT%
set ARG-5=CEPATH=%WCEROOT%
set ARG-6=CELIBDLLDIR=d:\personal\pocketPC\celib-palm-3.0
set ARG-8=YES=/y
set ARG-9=CFG=RELEASE
-set ARG-10=MACHINE=wince-mips-pocket-wce300
+
+rem
+rem uncomment one of following lines that matches your configuration
+
+rem set ARG-10=MACHINE=wince-mips-pocket-wce300
+rem set ARG-10=MACHINE=wince-arm-hpc-wce300
+rem set ARG-10=MACHINE=wince-arm-hpc-wce211
+rem set ARG-10=MACHINE=wince-sh3-hpc-wce211
+rem set ARG-10=MACHINE=wince-mips-hpc-wce211
+rem set ARG-10=MACHINE=wince-sh3-hpc-wce200
+rem set ARG-10=MACHINE=wince-mips-hpc-wce200
+rem set ARG-10=MACHINE=wince-arm-pocket-wce300
+rem set ARG-10=MACHINE=wince-mips-pocket-wce300
+rem set ARG-10=MACHINE=wince-sh3-pocket-wce300
+rem set ARG-10=MACHINE=wince-x86em-pocket-wce300
+rem set ARG-10=MACHINE=wince-mips-palm-wce211
+rem set ARG-10=MACHINE=wince-sh3-palm-wce211
+rem set ARG-10=MACHINE=wince-x86em-palm-wce211
+
set ARG-11=PERLCEDIR=$(MAKEDIR)
set ARG-12=MSVCDIR=D:\MSVStudio\VC98
set ARG-13=CECOPY=$(HPERL) -I$(PERLCEDIR)\lib $(PERLCEDIR)\comp.pl --copy
-set ARG-14=
-nmake -f Makefile.ce "%ARG-1%" "%ARG-2%" "%ARG-3%" "%ARG-4%" "%ARG-5%" "%ARG-6%" "%ARG-7%" "%ARG-8%" "%ARG-9%" "%ARG-10%" "%ARG-11%" "%ARG-12%" "%ARG-13%" "%ARG-14%" %1 %2 %3 %4 %5 %6 %7 %8 %9
+nmake -f Makefile.ce "%ARG-1%" "%ARG-2%" "%ARG-3%" "%ARG-4%" "%ARG-5%" "%ARG-6%" "%ARG-7%" "%ARG-8%" "%ARG-9%" "%ARG-10%" "%ARG-11%" "%ARG-12%" "%ARG-13%" %1 %2 %3 %4 %5 %6 %7 %8 %9
d_msgsnd='undef'
d_msync='undef'
d_munmap='undef'
-d_mymalloc='undef'
+d_mymalloc='~PERL_MALLOC~'
d_nanosleep='undef'
d_nice='undef'
d_nv_preserves_uv='define'
+++ /dev/null
-#ifndef SYS_STAT_H
-#define SYS_STAT_H 1
-
-#include <sys/types.h>
-
-/* stat.h */
-#define _S_IFMT 0170000 /* file type mask */
-#define _S_IFDIR 0040000 /* directory */
-#define _S_IFCHR 0020000 /* character special */
-#define _S_IFIFO 0010000 /* pipe */
-#define _S_IFREG 0100000 /* regular */
-#define _S_IREAD 0000400 /* read permission, owner */
-#define _S_IWRITE 0000200 /* write permission, owner */
-#define _S_IEXEC 0000100 /* execute/search permission, owner */
-
-#define _S_IFMT 0170000 /* file type mask */
-#define _S_IFDIR 0040000 /* directory */
-#define _S_IFCHR 0020000 /* character special */
-#define _S_IFIFO 0010000 /* pipe */
-#define _S_IFREG 0100000 /* regular */
-#define _S_IREAD 0000400 /* read permission, owner */
-#define _S_IWRITE 0000200 /* write permission, owner */
-#define _S_IEXEC 0000100 /* execute/search permission, owner */
-
-#define S_IFMT _S_IFMT
-#define S_IFREG _S_IFREG
-#define S_IFCHR _S_IFCHR
-#define S_IFDIR _S_IFDIR
-#define S_IREAD _S_IREAD
-#define S_IWRITE _S_IWRITE
-#define S_IEXEC _S_IEXEC
-
-#ifndef S_ISDIR
-#define S_ISDIR(X) (((X) & S_IFMT) == S_IFDIR)
-#endif
-#ifndef S_ISREG
-#define S_ISREG(X) (((X) & S_IFMT) == S_IFREG)
-#endif
-
-struct stat
-{
- dev_t st_dev;
- ino_t st_ino;
- unsigned short st_mode;
- short st_nlink;
- short st_uid;
- short st_gid;
- dev_t st_rdev;
- off_t st_size;
- time_t st_atime;
- time_t st_mtime;
- time_t st_ctime;
-};
-
-#endif
--- /dev/null
+use strict;
+use Cwd;
+use File::Path;
+use File::Find;
+
+my %opts = (
+ #defaults
+ 'distdir' => 'distdir',
+ 'unicode' => 1, # include unicode by default
+ 'minimal' => 0, # minimal possible distribution.
+ # actually this is just perl.exe and perlXX.dll
+ # but can be extended by additional exts
+ # ... (as soon as this will be implemented :)
+ 'include-modules' => '', # TODO
+ 'exclude-modules' => '', # TODO
+ #??? 'only-modules' => '', # TODO
+ 'platform' => 'wince',
+ 'strip-pod' => 0, # TODO strip POD from perl modules
+ 'adaptation' => 0, # TODO do some adaptation, such as stripping such
+ # occurences as "if ($^O eq 'VMS'){...}" for certain modules
+ 'zip' => 0, # perform zip (TODO)
+ 'clean-exts' => 0,
+ #options itself
+ (map {/^--([\-_\w]+)=(.*)$/} @ARGV), # --opt=smth
+ (map {/^no-?(.*)$/i?($1=>0):($_=>1)} map {/^--([\-_\w]+)$/} @ARGV), # --opt --no-opt --noopt
+ );
+
+# TODO -- error checking. When something goes wrong, just exit with rc!=0
+
+my $cwd = cwd;
+
+if ($opts{'clean-exts'}) {
+ # unfortunately, unlike perl58.dll and like, extensions for different
+ # platforms are built in same directory, therefore we must be able to clean
+ # them often
+ unlink '../config.sh'; # delete cache config file, which remembers our previous config
+ chdir '../ext';
+ find({no_chdir=>1,wanted => sub{
+ unlink if /((?:\.obj|\/makefile|\/errno\.pm))$/i;
+ }
+ },'.');
+ exit;
+}
+
+my (%libexclusions, %extexclusions);
+my @lfiles;
+sub copy($$);
+
+# lib
+chdir '../lib';
+find({no_chdir=>1,wanted=>sub{push @lfiles, $_ if /\.p[lm]$/}},'.');
+chdir $cwd;
+# exclusions
+@lfiles = grep {!exists $libexclusions{$_}} @lfiles;
+#inclusions
+#...
+#copy them
+for (@lfiles) {
+ /^(.*)\/[^\/]+$/;
+ mkpath "$opts{distdir}/lib/$1";
+ copy "../lib/$_", "$opts{distdir}/lib/$_";
+}
+
+#ext
+my @efiles;
+chdir '../ext';
+find({no_chdir=>1,wanted=>sub{push @efiles, $_ if /\.pm$/}},'.');
+chdir $cwd;
+# exclusions
+#...
+#inclusions
+#...
+#copy them
+#{s[/(\w+)/\1\.pm][/$1.pm]} @efiles;
+for (@efiles) {
+ /^(.*)\/([^\/]+)\/([^\/]+)$/;
+ copy "../ext/$_", "$opts{distdir}/lib/$1/$3";
+}
+
+# Config.pm
+copy "../xlib/$opts{platform}/Config.pm", "$opts{distdir}/lib/Config.pm";
+
+# auto
+my @afiles;
+chdir "../xlib/$opts{platform}/auto";
+find({no_chdir=>1,wanted=>sub{push @afiles, $_ if /\.(dll|bs)$/}},'.');
+chdir $cwd;
+for (@afiles) {
+ copy "../xlib/$opts{platform}/auto/$_", "$opts{distdir}/lib/auto/$_";
+}
+
+sub copy {
+ my ($fnfrom, $fnto) = @_;
+ my $ffrom = do {local (@ARGV,$/) = $fnfrom; <>};
+ if ($opts{'strip-pod'}) {
+ # actually following regexp is suspicious to not work everywhere.
+ # but we've checked on our set of modules, and it's fit for our purposes
+ $ffrom =~ s/^=\w+.*?^=cut(?:\n|\Z)//msg;
+ # $ffrom =~ s/^__END__.*\Z//msg; # TODO -- deal with Autoload
+ }
+ mkpath $1 if $fnto=~/^(.*)\/([^\/]+)$/;
+ open my $fhout, ">$fnto";
+ print $fhout $ffrom;
+}
+
+BEGIN {
+%libexclusions = map {$_=>1} split/\s/, <<"EOS";
+abbrev.pl bigfloat.pl bigint.pl bigrat.pl cacheout.pl complete.pl ctime.pl
+dotsh.pl exceptions.pl fastcwd.pl flush.pl ftp.pl getcwd.pl getopt.pl
+getopts.pl hostname.pl look.pl newgetopt.pl pwd.pl termcap.pl
+EOS
+%extexclusions = map {$_=>1} split/\s/, <<"EOS";
+EOS
+
+}
+
+++ /dev/null
-# Time-stamp: <01/08/01 21:03:25 keuchel@w2k>
-#
-# rebuild all perl targets
-
-machines="
-wince-arm-hpc-wce300
-wince-arm-hpc-wce211
-wince-sh3-hpc-wce211
-wince-mips-hpc-wce211
-wince-mips-hpc-wce200
-wince-sh3-hpc-wce200
-wince-arm-pocket-wce300
-wince-mips-pocket-wce300
-wince-sh3-pocket-wce300
-wince-x86em-pocket-wce300
-wince-sh3-palm-wce211
-wince-mips-palm-wce211
-wince-x86em-palm-wce211
-"
-
-for mach in $machines; do
- mflags="-f makefile.ce MACHINE=$mach"
- echo "Calling nmake for $mach..."
- nmake $mflags clean
- nmake $mflags all
- nmake $mflags all dlls || exit 1
- nmake $mflags makedist
-done
-
+++ /dev/null
-tdirs=`xfind . -type d -name 'wince-*'`
-test "$tdirs" = "" || rm -rf $dirs
-rm -f *.res *.pdb *~
-
+++ /dev/null
-cd h:/src
-
-files="perl.c perlio.c perl.h"
-
-for f in $files; do
- diff -c vc/perl/$f wince/perl/$f
-done
-
projects / p5sagit/p5-mst-13.2.git / commitdiff