=head1 DESCRIPTION
Perl has two simple, built-in ways to open files: the shell way for
-convenience, and the C way for precision. The choice is yours.
+convenience, and the C way for precision. The shell way also has 2- and
+3-argument forms, which have different semantics for handling the filename.
+The choice is yours.
=head1 Open E<agrave> la shell
The C<open> function takes two arguments: the first is a filehandle,
and the second is a single string comprising both what to open and how
to open it. C<open> returns true when it works, and when it fails,
-returns a false value and sets the special variable $! to reflect
+returns a false value and sets the special variable C<$!> to reflect
the system error. If the filehandle was previously opened, it will
be implicitly closed first.
A few things to notice. First, the leading less-than is optional.
If omitted, Perl assumes that you want to open the file for reading.
+Note also that the first example uses the C<||> logical operator, and the
+second uses C<or>, which has lower precedence. Using C<||> in the latter
+examples would effectively mean
+
+ open INFO, ( "< datafile" || die "can't open datafile: $!" );
+
+which is definitely not what you want.
+
The other important thing to notice is that, just as in the shell,
any white space before or after the filename is ignored. This is good,
because you wouldn't want these to do different things:
open INFO, "< datafile"
open INFO, "< datafile"
-Ignoring surround whitespace also helps for when you read a filename in
-from a different file, and forget to trim it before opening:
+Ignoring surrounding whitespace also helps for when you read a filename
+in from a different file, and forget to trim it before opening:
$filename = <INFO>; # oops, \n still there
open(EXTRA, "< $filename") || die "can't open $filename: $!";
as well. For accessing files with naughty names, see
L<"Dispelling the Dweomer">.
+There is also a 3-argument version of C<open>, which lets you put the
+special redirection characters into their own argument:
+
+ open( INFO, ">", $datafile ) || die "Can't create $datafile: $!";
+
+In this case, the filename to open is the actual string in C<$datafile>,
+so you don't have to worry about C<$datafile> containing characters
+that might influence the open mode, or whitespace at the beginning of
+the filename that would be absorbed in the 2-argument version. Also,
+any reduction of unnecessary string interpolation is a good thing.
+
+=head2 Indirect Filehandles
+
+C<open>'s first argument can be a reference to a filehandle. As of
+perl 5.6.0, if the argument is uninitialized, Perl will automatically
+create a filehandle and put a reference to it in the first argument,
+like so:
+
+ open( my $in, $infile ) or die "Couldn't read $infile: $!";
+ while ( <$in> ) {
+ # do something with $_
+ }
+ close $in;
+
+Indirect filehandles make namespace management easier. Since filehandles
+are global to the current package, two subroutines trying to open
+C<INFILE> will clash. With two functions opening indirect filehandles
+like C<my $infile>, there's no clash and no need to worry about future
+conflicts.
+
+Another convenient behavior is that an indirect filehandle automatically
+closes when it goes out of scope or when you undefine it:
+
+ sub firstline {
+ open( my $in, shift ) && return scalar <$in>;
+ # no close() required
+ }
+
=head2 Pipe Opens
In C, when you want to open a file using the standard I/O library,
remains the same--just its argument differs.
If the leading character is a pipe symbol, C<open> starts up a new
-command and open a write-only filehandle leading into that command.
+command and opens a write-only filehandle leading into that command.
This lets you write into that handle and have what you write show up on
that command's standard input. For example:
command writes to its standard output show up on your handle for reading.
For example:
- open(NET, "netstat -i -n |") || die "can't fun netstat: $!";
+ open(NET, "netstat -i -n |") || die "can't fork netstat: $!";
while (<NET>) { } # do something with input
close(NET) || die "can't close netstat: $!";
use this approach for updating. Instead, Perl's B<-i> flag comes to
the rescue. The following command takes all the C, C++, or yacc source
or header files and changes all their foo's to bar's, leaving
-the old version in the original file name with a ".orig" tacked
+the old version in the original filename with a ".orig" tacked
on the end:
$ perl -i.orig -pe 's/\bfoo\b/bar/g' *.[Cchy]
You are welcome to pre-process your @ARGV before starting the loop to
make sure it's to your liking. One reason to do this might be to remove
command options beginning with a minus. While you can always roll the
-simple ones by hand, the Getopts modules are good for this.
+simple ones by hand, the Getopts modules are good for this:
use Getopt::Std;
input (F<tmpfile> in this case), the F<f2> file, the F<cmd2> command,
and finally the F<f3> file.
-Yes, this also means that if you have a file named "-" (and so on) in
-your directory, that they won't be processed as literal files by C<open>.
-You'll need to pass them as "./-" much as you would for the I<rm> program.
-Or you could use C<sysopen> as described below.
+Yes, this also means that if you have files named "-" (and so on) in
+your directory, they won't be processed as literal files by C<open>.
+You'll need to pass them as "./-", much as you would for the I<rm> program,
+or you could use C<sysopen> as described below.
One of the more interesting applications is to change files of a certain
name into pipes. For example, to autoprocess gzipped or compressed
If you want the convenience of the shell, then Perl's C<open> is
definitely the way to go. On the other hand, if you want finer precision
-than C's simplistic fopen(3S) provides, then you should look to Perl's
+than C's simplistic fopen(3S) provides you should look to Perl's
C<sysopen>, which is a direct hook into the open(2) system call.
That does mean it's a bit more involved, but that's the price of
precision.
C<O_DEFER>, C<O_SYNC>, C<O_ASYNC>, C<O_DSYNC>, C<O_RSYNC>,
C<O_NOCTTY>, C<O_NDELAY> and C<O_LARGEFILE>. Consult your open(2)
manpage or its local equivalent for details. (Note: starting from
-Perl release 5.6 the O_LARGEFILE flag, if available, is automatically
+Perl release 5.6 the C<O_LARGEFILE> flag, if available, is automatically
added to the sysopen() flags because large files are the default.)
Here's how to use C<sysopen> to emulate the simple C<open> calls we had
before. We'll omit the C<|| die $!> checks for clarity, but make sure
you always check the return values in real code. These aren't quite
the same, since C<open> will trim leading and trailing white space,
-but you'll get the idea:
+but you'll get the idea.
To open a file for reading:
sysopen(FH, $path, O_RDWR);
And here are things you can do with C<sysopen> that you cannot do with
-a regular C<open>. As you see, it's just a matter of controlling the
+a regular C<open>. As you'll see, it's just a matter of controlling the
flags in the third argument.
To open a file for writing, creating a new file which must not previously
For example, if your C<umask> were 027, then the 020 part would
disable the group from writing, and the 007 part would disable others
from reading, writing, or executing. Under these conditions, passing
-C<sysopen> 0666 would create a file with mode 0640, since C<0666 &~ 027>
+C<sysopen> 0666 would create a file with mode 0640, since C<0666 & ~027>
is 0640.
You should seldom use the MASK argument to C<sysopen()>. That takes
it, it's necessary to protect any leading and trailing whitespace.
Leading whitespace is protected by inserting a C<"./"> in front of a
filename that starts with whitespace. Trailing whitespace is protected
-by appending an ASCII NUL byte (C<"\0">) at the end off the string.
+by appending an ASCII NUL byte (C<"\0">) at the end of the string.
$file =~ s#^(\s)#./$1#;
open(FH, "< $file\0") || die "can't open $file: $!";
Some warning at scriptname line 29, <FH> line 7.
That's because you opened a filehandle FH, and had read in seven records
-from it. But what was the name of the file, not the handle?
+from it. But what was the name of the file, rather than the handle?
-If you aren't running with C<strict refs>, or if you've turn them off
+If you aren't running with C<strict refs>, or if you've turned them off
temporarily, then all you have to do is this:
open($path, "< $path") || die "can't open $path: $!";
symbolic links, named pipes, Unix-domain sockets, and block and character
devices. Those are all files, too--just not I<plain> files. This isn't
the same issue as being a text file. Not all text files are plain files.
-Not all plain files are textfiles. That's why there are separate C<-f>
+Not all plain files are text files. That's why there are separate C<-f>
and C<-T> file tests.
To open a directory, you should use the C<opendir> function, then
closedir(DIR);
If you want to process directories recursively, it's better to use the
-File::Find module. For example, this prints out all files recursively,
-add adds a slash to their names if the file is a directory.
+File::Find module. For example, this prints out all files recursively
+and adds a slash to their names if the file is a directory.
@ARGV = qw(.) unless @ARGV;
use File::Find;
}
}
+=head2 Opening Named Pipes
+
Named pipes are a different matter. You pretend they're regular files,
but their opens will normally block until there is both a reader and
a writer. You can read more about them in L<perlipc/"Named Pipes">.
Unix-domain sockets are rather different beasts as well; they're
described in L<perlipc/"Unix-Domain TCP Clients and Servers">.
-When it comes to opening devices, it can be easy and it can tricky.
+When it comes to opening devices, it can be easy and it can be tricky.
We'll assume that if you're opening up a block device, you know what
you're doing. The character devices are more interesting. These are
typically used for modems, mice, and some kinds of printers. This is
print TTYOUT "+++at\015";
$answer = <TTYIN>;
-With descriptors that you haven't opened using C<sysopen>, such as a
-socket, you can set them to be non-blocking using C<fcntl>:
+With descriptors that you haven't opened using C<sysopen>, such as
+sockets, you can set them to be non-blocking using C<fcntl>:
use Fcntl;
fcntl(Connection, F_SETFL, O_NONBLOCK)
also some high-level modules on CPAN that can help you with these games.
Check out Term::ReadKey and Term::ReadLine.
+=head2 Opening Sockets
+
What else can you open? To open a connection using sockets, you won't use
one of Perl's two open functions. See
L<perlipc/"Sockets: Client/Server Communication"> for that. Here's an
Passing C<sysopen> a non-standard flag option will also open the file in
binary mode on those systems that support it. This is the equivalent of
-opening the file normally, then calling C<binmode>ing on the handle.
+opening the file normally, then calling C<binmode> on the handle.
sysopen(BINDAT, "records.data", O_RDWR | O_BINARY)
|| die "can't open records.data: $!";
Now you can use C<read> and C<print> on that handle without worrying
-about the system non-standard I/O library breaking your data. It's not
+about the non-standard system I/O library breaking your data. It's not
a pretty picture, but then, legacy systems seldom are. CP/M will be
with us until the end of days, and after.
=head2 File Locking
In a multitasking environment, you may need to be careful not to collide
-with other processes who want to do I/O on the same files as others
+with other processes who want to do I/O on the same files as you
are working on. You'll often need shared or exclusive locks
on files for reading and writing respectively. You might just
pretend that only exclusive locks exist.
Never use the existence of a file C<-e $file> as a locking indication,
because there is a race condition between the test for the existence of
-the file and its creation. Atomicity is critical.
+the file and its creation. It's possible for another process to create
+a file in the slice of time between your existence check and your attempt
+to create the file. Atomicity is critical.
Perl's most portable locking interface is via the C<flock> function,
-whose simplicity is emulated on systems that don't directly support it,
-such as SysV or WindowsNT. The underlying semantics may affect how
+whose simplicity is emulated on systems that don't directly support it
+such as SysV or Windows. The underlying semantics may affect how
it all works, so you should learn how C<flock> is implemented on your
system's port of Perl.
In Perl 5.8.0 a new I/O framework called "PerlIO" was introduced.
This is a new "plumbing" for all the I/O happening in Perl; for the
-most part everything will work just as it did, but PerlIO brought in
-also some new features, like the capability of think of I/O as "layers".
+most part everything will work just as it did, but PerlIO also brought
+in some new features such as the ability to think of I/O as "layers".
One I/O layer may in addition to just moving the data also do
transformations on the data. Such transformations may include
compression and decompression, encryption and decryption, and transforming
=item *
-The three-(or more)-argument form of C<open()> is being used and the
+The three-(or more)-argument form of C<open> is being used and the
second argument contains something else in addition to the usual
C<< '<' >>, C<< '>' >>, C<< '>>' >>, C<< '|' >> and their variants,
for example:
=item *
-The two-argument form of C<binmode<open()> is being used, for example
+The two-argument form of C<binmode> is being used, for example
binmode($fh, ":encoding(utf16)");
=head1 SEE ALSO
-The C<open> and C<sysopen> function in perlfunc(1);
-the standard open(2), dup(2), fopen(3), and fdopen(3) manpages;
+The C<open> and C<sysopen> functions in perlfunc(1);
+the system open(2), dup(2), fopen(3), and fdopen(3) manpages;
the POSIX documentation.
=head1 AUTHOR and COPYRIGHT
projects / p5sagit/p5-mst-13.2.git / commitdiff