lib/ExtUtils/t/00compile.t See if MakeMaker modules compile
lib/ExtUtils/t/arch_check.t Test MakeMaker's arch_check()
lib/ExtUtils/t/backwards.t Check MakeMaker's backwards compatibility
-lib/ExtUtils/t/basic_finish.pl See if MakeMaker can build a module (part 2)
-lib/ExtUtils/t/basic.pl See if MakeMaker can build a module (part 1)
-lib/ExtUtils/t/basic.t See if MakeMaker can build a module (wrapper for basic.pl and basic_finish.pl)
+lib/ExtUtils/t/basic.t See if MakeMaker can build a module
lib/ExtUtils/t/build_man.t Set if MakeMaker builds manpages
lib/ExtUtils/t/can_write_dir.t Does the _can_write_dir function of ExtUtils::Install work properly?
lib/ExtUtils/t/cd.t Test to see cd works
lib/ExtUtils/t/installed_file.t Test for ExtUtils::MakeMaker
lib/ExtUtils/t/Installed.t See if ExtUtils::Installed works
lib/ExtUtils/t/Install.t See if ExtUtils::Install works
+lib/ExtUtils/t/InstallWithMM.t See if ExtUtils::Install works (related to EUMM/t/basic.t)
lib/ExtUtils/t/INST_PREFIX.t See if MakeMaker can apply PREFIXs
lib/ExtUtils/t/INST.t Check MakeMaker INST_* macros
lib/ExtUtils/t/is_of_type.t Test for ExtUtils::MakeMaker
Revision history for ExtUtils-Install
+1.54
+
+This is a "no-change" version bump because I pushed the v1.53 change
+and then realized that MakeMaker.t was a bad name for a file that would
+end up in core where the EUMM tests and the EUI tests are in the same
+directory. This renames it to InstallWithMM.t.
+
+1.53
+
+Final stage of the divorce from EUMM. Now the EUMM related tests are no
+longer shared. Build.pl and Build.t go, and there shall be peace on earth.
+At least until somebody patches EUMM/t/basic.t for something EUI related...
+
+Thanks to M. Schwern for helping me work this one out. Cheers man.
+
1.52_03
Missed the t/Installed.t test from core. Bumped version number to allow
@ISA = ('Exporter');
@EXPORT = ('install','uninstall','pm_to_blib', 'install_default');
-=pod
+=pod
=head1 NAME
uninstall($packlist);
pm_to_blib({ 'lib/Foo/Bar.pm' => 'blib/lib/Foo/Bar.pm' });
-
+
=head1 VERSION
-1.52
+1.54
=cut
-$VERSION = '1.52_03';
+$VERSION = '1.54'; # <---- dont forget to update the POD section just above this line!
$VERSION = eval $VERSION;
=pod
my $unix_rpt = $ENV{'DECC$FILENAME_UNIX_REPORT'} || '';
my $efs_charset = $ENV{'DECC$EFS_CHARSET'} || '';
my $efs_case = $ENV{'DECC$EFS_CASE_PRESERVE'} || '';
- $vms_unix_rpt = $unix_rpt =~ /^[ET1]/i;
+ $vms_unix_rpt = $unix_rpt =~ /^[ET1]/i;
$vms_efs = $efs_charset =~ /^[ET1]/i;
$vms_case = $efs_case =~ /^[ET1]/i;
}
- $Is_VMS_noefs = 0 if ($vms_efs);
+ $Is_VMS_noefs = 0 if ($vms_efs);
}
my $dir=shift;
unless (defined $has_posix) {
$has_posix= (!$Is_cygwin && !$Is_Win32
- && eval 'local $^W; require POSIX; 1') || 0;
+ && eval 'local $^W; require POSIX; 1') || 0;
}
if ($has_posix) {
return POSIX::access($dir, POSIX::W_OK());
} elsif ($show and $dry_run) {
print "$_\n" for @make;
}
-
+
}
=pod
# deprecated forms
install(\%from_to);
- install(\%from_to, $verbose, $dry_run, $uninstall_shadows,
+ install(\%from_to, $verbose, $dry_run, $uninstall_shadows,
$skip, $always_copy, \%result);
- # recommended form as of 1.47
- install([
+ # recommended form as of 1.47
+ install([
from_to => \%from_to,
- verbose => 1,
+ verbose => 1,
dry_run => 0,
uninstall_shadows => 1,
skip => undef,
always_copy => 1,
result => \%install_results,
]);
-
+
Copies each directory tree of %from_to to its corresponding value
preserving timestamps and permissions.
If $uninstall_shadows is true any differing versions throughout @INC
will be uninstalled. This is "make install UNINST=1"
-As of 1.37_02 install() supports the use of a list of patterns to filter out
-files that shouldn't be installed. If $skip is omitted or undefined then
-install will try to read the list from INSTALL.SKIP in the CWD. This file is
-a list of regular expressions and is just like the MANIFEST.SKIP file used
+As of 1.37_02 install() supports the use of a list of patterns to filter out
+files that shouldn't be installed. If $skip is omitted or undefined then
+install will try to read the list from INSTALL.SKIP in the CWD. This file is
+a list of regular expressions and is just like the MANIFEST.SKIP file used
by L<ExtUtils::Manifest>.
-A default site INSTALL.SKIP may be provided by setting then environment
-variable EU_INSTALL_SITE_SKIPFILE, this will only be used when there isn't a
-distribution specific INSTALL.SKIP. If the environment variable
-EU_INSTALL_IGNORE_SKIP is true then no install file filtering will be
+A default site INSTALL.SKIP may be provided by setting then environment
+variable EU_INSTALL_SITE_SKIPFILE, this will only be used when there isn't a
+distribution specific INSTALL.SKIP. If the environment variable
+EU_INSTALL_IGNORE_SKIP is true then no install file filtering will be
performed.
-If $skip is undefined then the skip file will be autodetected and used if it
-is found. If $skip is a reference to an array then it is assumed the array
-contains the list of patterns, if $skip is a true non reference it is
-assumed to be the filename holding the list of patterns, any other value of
+If $skip is undefined then the skip file will be autodetected and used if it
+is found. If $skip is a reference to an array then it is assumed the array
+contains the list of patterns, if $skip is a true non reference it is
+assumed to be the filename holding the list of patterns, any other value of
$skip is taken to mean that no install filtering should occur.
B<Changes As of Version 1.47>
As of version 1.47 the following additions were made to the install interface.
Note that the new argument style and use of the %result hash is recommended.
-The $always_copy parameter which when true causes files to be updated
-regardles as to whether they have changed, if it is defined but false then
-copies are made only if the files have changed, if it is undefined then the
+The $always_copy parameter which when true causes files to be updated
+regardles as to whether they have changed, if it is defined but false then
+copies are made only if the files have changed, if it is undefined then the
value of the environment variable EU_INSTALL_ALWAYS_COPY is used as default.
-The %result hash will be populated with the various keys/subhashes reflecting
+The %result hash will be populated with the various keys/subhashes reflecting
the install. Currently these keys and their structure are:
install => { $target => $source },
install_fail => { $target => $source },
install_unchanged => { $target => $source },
-
+
install_filtered => { $source => $pattern },
-
+
uninstall => { $uninstalled => $source },
uninstall_fail => { $uninstalled => $source },
-
+
where C<$source> is the filespec of the file being installed. C<$target> is where
it is being installed to, and C<$uninstalled> is any shadow file that is in C<@INC>
or C<$ENV{PERL5LIB}> or other standard locations, and C<$pattern> is the pattern that
caused a source file to be skipped. In future more keys will be added, such as to
-show created directories, however this requires changes in other modules and must
+show created directories, however this requires changes in other modules and must
therefore wait.
-
-These keys will be populated before any exceptions are thrown should there be an
-error.
+
+These keys will be populated before any exceptions are thrown should there be an
+error.
Note that all updates of the %result are additive, the hash will not be
cleared before use, thus allowing status results of many installs to be easily
B<NEW ARGUMENT STYLE>
If there is only one argument and it is a reference to an array then
-the array is assumed to contain a list of key-value pairs specifying
+the array is assumed to contain a list of key-value pairs specifying
the options. In this case the option "from_to" is mandatory. This style
means that you dont have to supply a cryptic list of arguments and can
use a self documenting argument list that is easier to understand.
B<RETURN>
-If all actions were successful install will return a hashref of the results
-as described above for the $result parameter. If any action is a failure
-then install will die, therefore it is recommended to pass in the $result
-parameter instead of using the return value. If the result parameter is
+If all actions were successful install will return a hashref of the results
+as described above for the $result parameter. If any action is a failure
+then install will die, therefore it is recommended to pass in the $result
+parameter instead of using the return value. If the result parameter is
provided then the returned hashref will be the passed in hashref.
=cut
my($from_to,$verbose,$dry_run,$uninstall_shadows,$skip,$always_copy,$result) = @_;
if (@_==1 and eval { 1+@$from_to }) {
my %opts = @$from_to;
- $from_to = $opts{from_to}
+ $from_to = $opts{from_to}
or Carp::confess("from_to is a mandatory parameter");
$verbose = $opts{verbose};
$dry_run = $opts{dry_run};
$always_copy = $opts{always_copy};
$result = $opts{result};
}
-
+
$result ||= {};
$verbose ||= 0;
$dry_run ||= 0;
$skip= _get_install_skip($skip,$verbose);
$always_copy = $ENV{EU_INSTALL_ALWAYS_COPY}
- || $ENV{EU_ALWAYS_COPY}
+ || $ENV{EU_ALWAYS_COPY}
|| 0
unless defined $always_copy;
my $cwd = cwd();
my @found_files;
my %check_dirs;
-
+
MOD_INSTALL: foreach my $source (sort keys %from_to) {
#copy the tree to the target directory without altering
#timestamp and permission and remember for the .packlist
}
# we have to do this for back compat with old File::Finds
# and because the target is relative
- my $save_cwd = _chdir($cwd);
+ my $save_cwd = _chdir($cwd);
my $diff = 0;
# XXX: I wonder how useful this logic is actually -- demerphq
if ( $always_copy or !-f $targetfile or -s $targetfile != $size) {
# we might not need to copy this file
$diff = compare($sourcefile, $targetfile);
}
- $check_dirs{$targetdir}++
+ $check_dirs{$targetdir}++
unless -w $targetfile;
-
+
push @found_files,
[ $diff, $File::Find::dir, $origfile,
$mode, $size, $atime, $mtime,
$targetdir, $targetfile, $sourcedir, $sourcefile,
-
- ];
+
+ ];
#restore the original directory we were in when File::Find
#called us so that it doesnt get horribly confused.
- _chdir($save_cwd);
- }, $current_directory );
+ _chdir($save_cwd);
+ }, $current_directory );
_chdir($cwd);
- }
+ }
foreach my $targetdir (sort keys %check_dirs) {
_mkpath( $targetdir, 0, 0755, $verbose, $dry_run );
}
foreach my $found (@found_files) {
my ($diff, $ffd, $origfile, $mode, $size, $atime, $mtime,
$targetdir, $targetfile, $sourcedir, $sourcefile)= @$found;
-
+
my $realtarget= $targetfile;
if ($diff) {
eval {
_mkpath( $targetdir, 0, 0755, $verbose, $dry_run );
}
print "Installing $targetfile\n";
-
+
_copy( $sourcefile, $targetfile, $verbose, $dry_run, );
-
-
+
+
#XXX OS-SPECIFIC
print "utime($atime,$mtime,$targetfile)\n" if $verbose>1;
utime($atime,$mtime + $Is_VMS,$targetfile) unless $dry_run>1;
-
-
+
+
$mode = 0444 | ( $mode & 0111 ? 0111 : 0 );
$mode = $mode | 0222
if $realtarget ne $targetfile;
$INST_SCRIPT => $Config{installscript},
$INST_MAN1DIR => $Config{installman1dir},
$INST_MAN3DIR => $Config{installman3dir},
- @INST_HTML,
+ @INST_HTML,
},1,0,0);
}
$ignore||="";
my $file = (File::Spec->splitpath($filepath))[2];
my %seen_dir = ();
-
+
my @PERL_ENV_LIB = split $Config{path_sep}, defined $ENV{'PERL5LIB'}
? $ENV{'PERL5LIB'} : $ENV{'PERLLIB'} || '';
-
- my @dirs=( @PERL_ENV_LIB,
- @INC,
+
+ my @dirs=( @PERL_ENV_LIB,
+ @INC,
@Config{qw(archlibexp
privlibexp
sitearchexp
- sitelibexp)});
-
+ sitelibexp)});
+
#warn join "\n","---",@dirs,"---";
my $seen_ours;
foreach $dir ( @dirs ) {
} else {
print "Unlinking $targetfile (shadowing?)\n" if $verbose;
eval {
- die "Fake die for testing"
+ die "Fake die for testing"
if $ExtUtils::Install::Testing and
ucase(File::Spec->canonpath($ExtUtils::Install::Testing)) eq ucase($targetfile);
forceunlink($targetfile,'tryhard');
1;
} or do {
$results->{fail_uninstall}{$targetfile} = $filepath;
- if ($seen_ours) {
+ if ($seen_ours) {
warn "Failed to remove probably harmless shadow file '$targetfile'\n";
} else {
die "$@\n";
Note that the alias EU_ALWAYS_COPY will be supported if EU_INSTALL_ALWAYS_COPY
is not defined until at least the 1.50 release. Please ensure you use the
-correct EU_INSTALL_ALWAYS_COPY.
+correct EU_INSTALL_ALWAYS_COPY.
=back
--- /dev/null
+#!/usr/bin/perl -w
+
+# Make sure EUI works with MakeMaker
+
+BEGIN {
+ if( $ENV{PERL_CORE} ) {
+ chdir 't' if -d 't';
+ @INC = ('../lib', 'lib');
+ }
+ else {
+ unshift @INC, 't/lib';
+ }
+}
+
+use strict;
+use Config;
+use ExtUtils::MakeMaker;
+
+use Test::More tests => 15;
+use MakeMaker::Test::Utils;
+use MakeMaker::Test::Setup::BFD;
+use File::Find;
+use File::Spec;
+use File::Path;
+
+my $make = make_run();
+
+# Environment variables which interfere with our testing.
+delete @ENV{qw(PREFIX LIB MAKEFLAGS)};
+
+# Run Makefile.PL
+{
+ my $perl = which_perl();
+ my $Is_VMS = $^O eq 'VMS';
+
+ chdir 't';
+
+ perl_lib;
+
+ my $Touch_Time = calibrate_mtime();
+
+ $| = 1;
+
+ ok( setup_recurs(), 'setup' );
+ END {
+ ok( chdir File::Spec->updir );
+ ok( teardown_recurs(), 'teardown' );
+ }
+
+ ok( chdir('Big-Dummy'), "chdir'd to Big-Dummy" ) ||
+ diag("chdir failed: $!");
+
+ my @mpl_out = run(qq{$perl Makefile.PL "PREFIX=../dummy-install"});
+ END { rmtree '../dummy-install'; }
+
+ cmp_ok( $?, '==', 0, 'Makefile.PL exited with zero' ) ||
+ diag(@mpl_out);
+
+ END { unlink makefile_name(), makefile_backup() }
+}
+
+
+# make
+{
+ my $make_out = run($make);
+ is( $?, 0, 'make ran ok' ) ||
+ diag($make_out);
+}
+
+
+# Test 'make install VERBINST=1'
+{
+ my $make_install_verbinst = make_macro($make, 'install', VERBINST => 1);
+ my $install_out = run($make_install_verbinst);
+ is( $?, 0, 'install' ) || diag $install_out;
+ like( $install_out, qr/^Installing /m );
+ like( $install_out, qr/^Writing /m );
+
+ ok( -r '../dummy-install', ' install dir created' );
+ my %files = ();
+ find( sub {
+ # do it case-insensitive for non-case preserving OSs
+ my $file = lc $_;
+
+ # VMS likes to put dots on the end of things that don't have them.
+ $file =~ s/\.$// if $Is_VMS;
+
+ $files{$file} = $File::Find::name;
+ }, '../dummy-install' );
+ ok( $files{'dummy.pm'}, ' Dummy.pm installed' );
+ ok( $files{'liar.pm'}, ' Liar.pm installed' );
+ ok( $files{'program'}, ' program installed' );
+ ok( $files{'.packlist'}, ' packlist created' );
+ ok( $files{'perllocal.pod'},' perllocal.pod created' );
+}
+++ /dev/null
-#!/usr/bin/perl -w
-
-# *NOTE* This is executed by basic.t and is included in both ExtUtils-Install
-# and ExtUtils-MakeMaker as well as Perl itself. Which bits of it execute depend
-# on each given packages basic.t
-#
-# If you patch any version of this file please make sure you let the other
-# distributions know as well. It should be identical in all three cases.
-
-# This test puts MakeMaker through the paces of a basic perl module
-# build, test and installation of the Big::Fat::Dummy module.
-
-use strict;
-use Config;
-use ExtUtils::MakeMaker;
-
-use Test::More tests => $::TESTS;
-use MakeMaker::Test::Utils;
-use MakeMaker::Test::Setup::BFD;
-use File::Find;
-use File::Spec;
-use File::Path;
-
-# 'make disttest' sets a bunch of environment variables which interfere
-# with our testing.
-delete @ENV{qw(PREFIX LIB MAKEFLAGS)};
-
-my $perl = which_perl();
-my $Is_VMS = $^O eq 'VMS';
-
-# GNV logical interferes with testing
-$ENV{'bin'} = '[.bin]' if $Is_VMS;
-
-chdir 't';
-
-perl_lib;
-
-my $Touch_Time = calibrate_mtime();
-
-$| = 1;
-
-ok( setup_recurs(), 'setup' );
-END {
- ok( chdir File::Spec->updir );
- ok( teardown_recurs(), 'teardown' );
-}
-
-ok( chdir('Big-Dummy'), "chdir'd to Big-Dummy" ) ||
- diag("chdir failed: $!");
-
-my @mpl_out = run(qq{$perl Makefile.PL "PREFIX=../dummy-install"});
-END { rmtree '../dummy-install'; }
-
-cmp_ok( $?, '==', 0, 'Makefile.PL exited with zero' ) ||
- diag(@mpl_out);
-
-my $makefile = makefile_name();
-ok( grep(/^Writing $makefile for Big::Dummy/,
- @mpl_out) == 1,
- 'Makefile.PL output looks right');
-
-ok( grep(/^Current package is: main$/,
- @mpl_out) == 1,
- 'Makefile.PL run in package main');
-
-ok( -e $makefile, 'Makefile exists' );
-
-# -M is flakey on VMS
-my $mtime = (stat($makefile))[9];
-cmp_ok( $Touch_Time, '<=', $mtime, ' its been touched' );
-
-END { unlink makefile_name(), makefile_backup() }
-
-my $make = make_run();
-
-{
- # Supress 'make manifest' noise
- local $ENV{PERL_MM_MANIFEST_VERBOSE} = 0;
- my $manifest_out = run("$make manifest");
- ok( -e 'MANIFEST', 'make manifest created a MANIFEST' );
- ok( -s 'MANIFEST', ' its not empty' );
-}
-
-END { unlink 'MANIFEST'; }
-
-unless ($::TEST_INSTALL_ONLY) {
- my $ppd_out = run("$make ppd");
- is( $?, 0, ' exited normally' ) || diag $ppd_out;
- ok( open(PPD, 'Big-Dummy.ppd'), ' .ppd file generated' );
- my $ppd_html;
- { local $/; $ppd_html = <PPD> }
- close PPD;
- like( $ppd_html, qr{^<SOFTPKG NAME="Big-Dummy" VERSION="0,01,0,0">}m,
- ' <SOFTPKG>' );
- like( $ppd_html, qr{^\s*<TITLE>Big-Dummy</TITLE>}m, ' <TITLE>' );
- like( $ppd_html, qr{^\s*<ABSTRACT>Try "our" hot dog's</ABSTRACT>}m, # Unconfuse highlighters: '
- ' <ABSTRACT>');
- like( $ppd_html,
- qr{^\s*<AUTHOR>Michael G Schwern <schwern\@pobox.com></AUTHOR>}m,
- ' <AUTHOR>' );
- like( $ppd_html, qr{^\s*<IMPLEMENTATION>}m, ' <IMPLEMENTATION>');
- like( $ppd_html, qr{^\s*<DEPENDENCY NAME="strict" VERSION="0,0,0,0" />}m,
- ' <DEPENDENCY>' );
- like( $ppd_html, qr{^\s*<OS NAME="$Config{osname}" />}m,
- ' <OS>' );
- my $archname = $Config{archname};
- $archname .= "-". substr($Config{version},0,3) if $] >= 5.008;
- like( $ppd_html, qr{^\s*<ARCHITECTURE NAME="$archname" />}m,
- ' <ARCHITECTURE>');
- like( $ppd_html, qr{^\s*<CODEBASE HREF="" />}m, ' <CODEBASE>');
- like( $ppd_html, qr{^\s*</IMPLEMENTATION>}m, ' </IMPLEMENTATION>');
- like( $ppd_html, qr{^\s*</SOFTPKG>}m, ' </SOFTPKG>');
- END { unlink 'Big-Dummy.ppd' }
-}
-
-my $test_out = run("$make test");
-like( $test_out, qr/All tests successful/, 'make test' );
-is( $?, 0, ' exited normally' ) ||
- diag $test_out;
-
-# Test 'make test TEST_VERBOSE=1'
-my $make_test_verbose = make_macro($make, 'test', TEST_VERBOSE => 1);
-$test_out = run("$make_test_verbose");
-like( $test_out, qr/ok \d+ - TEST_VERBOSE/, 'TEST_VERBOSE' );
-like( $test_out, qr/All tests successful/, ' successful' );
-is( $?, 0, ' exited normally' ) ||
- diag $test_out;
-
-# Test 'make install VERBINST=1'
-my $make_install_verbinst = make_macro($make, 'install', VERBINST => 1);
-my $install_out = run($make_install_verbinst);
-is( $?, 0, 'install' ) || diag $install_out;
-like( $install_out, qr/^Installing /m );
-like( $install_out, qr/^Writing /m );
-
-ok( -r '../dummy-install', ' install dir created' );
-my %files = ();
-find( sub {
- # do it case-insensitive for non-case preserving OSs
- my $file = lc $_;
-
- # VMS likes to put dots on the end of things that don't have them.
- $file =~ s/\.$// if $Is_VMS;
-
- $files{$file} = $File::Find::name;
-}, '../dummy-install' );
-ok( $files{'dummy.pm'}, ' Dummy.pm installed' );
-ok( $files{'liar.pm'}, ' Liar.pm installed' );
-ok( $files{'program'}, ' program installed' );
-ok( $files{'.packlist'}, ' packlist created' );
-ok( $files{'perllocal.pod'},' perllocal.pod created' );
-
-
-SKIP: {
- skip 'VMS install targets do not preserve $(PREFIX)', 9 if $Is_VMS;
-
- $install_out = run("$make install PREFIX=elsewhere VERBINST=1");
- is( $?, 0, 'install with PREFIX override' ) || diag $install_out;
- like( $install_out, qr/^Installing /m );
- like( $install_out, qr/^Writing /m );
-
- ok( -r 'elsewhere', ' install dir created' );
- %files = ();
- find( sub { $files{$_} = $File::Find::name; }, 'elsewhere' );
- ok( $files{'Dummy.pm'}, ' Dummy.pm installed' );
- ok( $files{'Liar.pm'}, ' Liar.pm installed' );
- ok( $files{'program'}, ' program installed' );
- ok( $files{'.packlist'}, ' packlist created' );
- ok( $files{'perllocal.pod'},' perllocal.pod created' );
- rmtree('elsewhere');
-}
-
-
-SKIP: {
- skip 'VMS install targets do not preserve $(DESTDIR)', 11 if $Is_VMS;
-
- $install_out = run("$make install PREFIX= DESTDIR=other VERBINST=1");
- is( $?, 0, 'install with DESTDIR' ) ||
- diag $install_out;
- like( $install_out, qr/^Installing /m );
- like( $install_out, qr/^Writing /m );
-
- ok( -d 'other', ' destdir created' );
- %files = ();
- my $perllocal;
- find( sub {
- $files{$_} = $File::Find::name;
- }, 'other' );
- ok( $files{'Dummy.pm'}, ' Dummy.pm installed' );
- ok( $files{'Liar.pm'}, ' Liar.pm installed' );
- ok( $files{'program'}, ' program installed' );
- ok( $files{'.packlist'}, ' packlist created' );
- ok( $files{'perllocal.pod'},' perllocal.pod created' );
-
- ok( open(PERLLOCAL, $files{'perllocal.pod'} ) ) ||
- diag("Can't open $files{'perllocal.pod'}: $!");
- { local $/;
- unlike(<PERLLOCAL>, qr/other/, 'DESTDIR should not appear in perllocal');
- }
- close PERLLOCAL;
-
-# TODO not available in the min version of Test::Harness we require
-# ok( open(PACKLIST, $files{'.packlist'} ) ) ||
-# diag("Can't open $files{'.packlist'}: $!");
-# { local $/;
-# local $TODO = 'DESTDIR still in .packlist';
-# unlike(<PACKLIST>, qr/other/, 'DESTDIR should not appear in .packlist');
-# }
-# close PACKLIST;
-
- rmtree('other');
-}
-
-
-SKIP: {
- skip 'VMS install targets do not preserve $(PREFIX)', 10 if $Is_VMS;
-
- $install_out = run("$make install PREFIX=elsewhere DESTDIR=other/ VERBINST=1");
- is( $?, 0, 'install with PREFIX override and DESTDIR' ) ||
- diag $install_out;
- like( $install_out, qr/^Installing /m );
- like( $install_out, qr/^Writing /m );
-
- ok( !-d 'elsewhere', ' install dir not created' );
- ok( -d 'other/elsewhere', ' destdir created' );
- %files = ();
- find( sub { $files{$_} = $File::Find::name; }, 'other/elsewhere' );
- ok( $files{'Dummy.pm'}, ' Dummy.pm installed' );
- ok( $files{'Liar.pm'}, ' Liar.pm installed' );
- ok( $files{'program'}, ' program installed' );
- ok( $files{'.packlist'}, ' packlist created' );
- ok( $files{'perllocal.pod'},' perllocal.pod created' );
- rmtree('other');
-}
-
+++ /dev/null
-# *NOTE* This is executed by basic.t and is included in both ExtUtils-MakeMaker
-# as well as Perlcore. Note also that it is expected to be executed in a do "FILE"
-# immediately after basic.plt is executed (similarly).
-
-# It is NOT expected to be executed under ExtUtils-Install alone, and in fact is not
-# distributed there, however it is expected to be executed under ExtUtils-MakeMaker
-# and Perl itself.
-
-my $dist_test_out = run("$make disttest");
-is( $?, 0, 'disttest' ) || diag($dist_test_out);
-
-# Test META.yml generation
-use ExtUtils::Manifest qw(maniread);
-
-my $distdir = 'Big-Dummy-0.01';
-$distdir =~ s/\./_/g if $Is_VMS;
-my $meta_yml = "$distdir/META.yml";
-
-ok( !-f 'META.yml', 'META.yml not written to source dir' );
-ok( -f $meta_yml, 'META.yml written to dist dir' );
-ok( !-e "META_new.yml", 'temp META.yml file not left around' );
-
-SKIP: {
- # META.yml spec 1.4 was added in 0.11
- skip "Test::YAML::Meta >= 0.11 required", 2
- unless eval { require Test::YAML::Meta } and
- Test::YAML::Meta->VERSION >= 0.11;
-
- Test::YAML::Meta::meta_spec_ok($meta_yml);
-}
-
-ok open META, $meta_yml or diag $!;
-my $meta = join '', <META>;
-ok close META;
-
-is $meta, <<"END";
---- #YAML:1.0
-name: Big-Dummy
-version: 0.01
-abstract: Try "our" hot dog's
-author:
- - Michael G Schwern <schwern\@pobox.com>
-license: unknown
-distribution_type: module
-configure_requires:
- ExtUtils::MakeMaker: 0
-requires:
- strict: 0
-no_index:
- directory:
- - t
- - inc
-generated_by: ExtUtils::MakeMaker version $ExtUtils::MakeMaker::VERSION
-meta-spec:
- url: http://module-build.sourceforge.net/META-spec-v1.4.html
- version: 1.4
-END
-
-my $manifest = maniread("$distdir/MANIFEST");
-# VMS is non-case preserving, so we can't know what the MANIFEST will
-# look like. :(
-_normalize($manifest);
-is( $manifest->{'meta.yml'}, 'Module meta-data (added by MakeMaker)' );
-
-
-# Test NO_META META.yml suppression
-unlink $meta_yml;
-ok( !-f $meta_yml, 'META.yml deleted' );
-@mpl_out = run(qq{$perl Makefile.PL "NO_META=1"});
-cmp_ok( $?, '==', 0, 'Makefile.PL exited with zero' ) || diag(@mpl_out);
-my $distdir_out = run("$make distdir");
-is( $?, 0, 'distdir' ) || diag($distdir_out);
-ok( !-f $meta_yml, 'META.yml generation suppressed by NO_META' );
-
-
-# Make sure init_dirscan doesn't go into the distdir
-@mpl_out = run(qq{$perl Makefile.PL "PREFIX=../dummy-install"});
-
-cmp_ok( $?, '==', 0, 'Makefile.PL exited with zero' ) || diag(@mpl_out);
-
-ok( grep(/^Writing $makefile for Big::Dummy/, @mpl_out) == 1,
- 'init_dirscan skipped distdir') ||
- diag(@mpl_out);
-
-# I know we'll get ignored errors from make here, that's ok.
-# Send STDERR off to oblivion.
-open(SAVERR, ">&STDERR") or die $!;
-open(STDERR, ">".File::Spec->devnull) or die $!;
-
-my $realclean_out = run("$make realclean");
-is( $?, 0, 'realclean' ) || diag($realclean_out);
-
-open(STDERR, ">&SAVERR") or die $!;
-close SAVERR;
-
-
-sub _normalize {
- my $hash = shift;
-
- while(my($k,$v) = each %$hash) {
- delete $hash->{$k};
- $hash->{lc $k} = $v;
- }
-}
projects / p5sagit/p5-mst-13.2.git / commitdiff