=head1 Name
-Perl for NetWare5.x
+Perl for NetWare
=head1 Description
-This file gives the instructions for building Perl5.6 and above for
-NetWare5.x. Please read and understand the terms under which this
-software is distributed.
+This file gives instructions for building Perl 5.7 and above, and also
+Perl modules for NetWare. Before you start, you may want to read the
+README file found in the top level directory into which the Perl source
+code distribution was extracted. Make sure you read and understand
+the terms under which the software is being distributed.
=head1 Build
=head2 Tools & SDK
-The build requires Watcom 11.x compiler and linker. In addition,
+The build requires CodeWarrior compiler and linker. In addition,
the "NetWare SDK", "NLM & NetWare Libraries for C" and
"NetWare Server Protocol Libraries for C", all available at
L<http://developer.novell.com/ndk/>, are also required.
Microsoft Visual C++ version 4.2 or later is also required.
-Currently the interpreter builds only with Watcom and we do have plans of
-making this work with CodeWarrior as well.
-
=head2 Setup
The build process is dependent on the location of the NetWare SDK.
-Once the required software is installed, the build environment has to
+Once the Tools & SDK are installed, the build environment has to
be setup. The following batch files setup the environment.
+=item *
+
+If you want to build with Default settings you can follow the One step process given below
+to create the default Build Environment.
+
+=item SetNWDef.bat
+
+The Execution of this file takes 2 parameters as input.The first being the NetWare SDK path,
+Second being the path for CodeWarrior Compiler & other tools. Execution of this file
+sets the Build type to Release(default) , the NetWare SDK path, path for Compiler & other tools.
+
+=back
+
+=item * Custom Build Environment
+
+If you want to change the default settings you could do so by following the steps listed
+below.
+
=over 4
=item Buildtype.bat
This sets the build type to release or debug.
-=item SetNWBld.bat
+=item *
-This sets the NetWare SDK path, Compiler & other tools path & MPK SDK path.
+Example: Typing "buildtype d on" at the command prompt causes the buildtype to be set to Debug type.
+ Typing "buildtype r" at the command prompt sets it to Release Build type.
-=item MPKBuild.bat
+=item SetNWBld.bat
-This is required only it we are building multi-processor enabled NLMs.
+This sets the NetWare SDK path, path to Compiler & other tools.
These batch files are under NetWare\bat folder. These batch files
call a couple of other batch files to setup the environment. Invoking
The make process runs only under WinNT shell.
The NetWare makefile is located under the NetWare folder.
-The makefile for NetWare makes use of miniperl.exe to run some of
-the Perl scripts. To create miniperl.exe, run nmake from
-win32 folder through WinNT command prompt. The build process
-can be stopped after miniperl.exe is created. Then run nmake
+This makes use of miniperl.exe to run some of
+the Perl scripts. To create miniperl.exe, first set the required paths for
+Visual c++ compilier (specify vcvars32 location) at the command prompt.
+Then run nmake from win32 folder through WinNT command prompt.
+The build process can be stopped after miniperl.exe is created. Then run nmake
from NetWare folder through WinNT command prompt.
Currently the following two build types are tested on NetWare
=head2 Extensions
-The make process also creates the Perl extensions which are called
-NLPs (NetWare Loadable Perl).
+The make process also creates the Perl extensions as I<<Extension>.nlm>
=head1 Install
of a NetWare server to I<i:>. This is because the makefile by default
sets the drive letter to I<i:>. Type I<nmake nwinstall> from NetWare folder
on a WinNT command prompt. This will copy the binaries and module files
-onto the NetWare server. The Perl interpreter, I<perl.nlm>, is copied under
-I<sys:\perl\system> folder. Copy I<perl.nlm> to I<sys:\system> folder.
+onto the NetWare server under I<sys:\Perl> folder. The Perl interpreter, I<perl.nlm>,
+is copied under I<sys:\perl\system> folder. Copy this to I<sys:\system> folder.
+
+Example: At the command prompt Type "nmake nwinstall".
+ This will install NetWare Perl on the NetWare Server.
+ Similiarly if you type "nmake install",
+ This will cause the binaries to be installed on the local machine.
+ (Typically under the c:\perl folder)
+
=head1 Build new extensions
To build extensions other than standard extensions, NetWare Perl has
-to be installed on Windows as well. This can be done by invoking
-I<nmake install> from the NetWare folder on a WinNT command prompt.
+to be installed on Windows along with Windows Perl. The Perl for Windows can be
+either downloaded from the CPAN site and built using the sources, or the binaries
+can be directly downloaded from the ActiveState site.
+Installation can be done by invoking I<nmake install> from the NetWare folder
+on a WinNT command prompt after building NetWare Perl by following steps given above.
This will copy all the *.pm files and other required files.
-Documentation files are not copied. This has to be done after
-installing Perl for Windows. Once this is done, do the following
-to build any extension:
+Documentation files are not copied.Thus one must first install Windows Perl, Then install
+NetWare Perl.
+
+Once this is done, do the following to build any extension:
=over 4
=item *
-perl -II<path to NetWare lib dir> -II<path to lib> Makefile.pl
+Change to the extension directory where its source files are present.
+
+=item *
+
+Run the following command at the command prompt:
-For example:
+ perl -II<path to NetWare lib dir> -II<path to lib> Makefile.pl
- perl -Ic:/perl/5.6.1/lib/NetWare-multi-thread -Ic:\perl\5.6.1\lib MakeFile.pl
+Example:
+
+ perl -Ic:/perl/5.7.2/lib/NetWare-x86-multi-thread -Ic:\perl\5.7.2\lib MakeFile.pl
=item *
nmake install
Install will copy the files into the Windows machine where NetWare
-Perl is installed, these files have to be copied to the NetWare server
-manually. Alternatively, pass I<INSTALLSITELIB=i:\perl\lib> as an
-input to makefile.pl above. Where I<i:> is the mapped drive to the
-sys: volume of the server where Perl on NetWare is installed. Now
-saying I<nmake install>, will copy the files to the server.
-
-=back
-
-=head1 Known Issues
-
-=over 4
+Perl is installed and these files may have to be copied to the NetWare server
+manually. Alternatively, pass I<INSTALLSITELIB=i:\perl\lib> as an
+input to makefile.pl above. Here I<i:> is the mapped drive to the
+sys: volume of the server where Perl on NetWare is installed. Now
+typing I<nmake install>, will copy the files onto the NetWare server.
-=item *
+Example: You can execute the following on the command prompt.
-With USE_ITHREADS not defined, backtick seems to be having some problems.
+ perl -Ic:/perl/5.7.2/lib/NetWare-x86-multi-thread -Ic:\perl\5.7.2\lib MakeFile.pl
+ INSTALLSITELIB=i:\perl\lib
-=item *
-
-The utility scripts (pod2html.pl, pod2man.pl, perldoc.pl etc.) are not
-yet ported to work on NetWare.
+=back
-=item *
+= item *
-Also fork() is not currently implemented.
+Note: Some modules downloaded from CPAN may require NetWare related API
+in order to build on NetWare.Other modules may however build smoothly with or
+without minor changes depending on the type of module.
=back
=head1 Acknowledgements
The makefile for Win32 is used as a reference to create the makefile
-for NetWare build. Also, the make process for NetWare port uses
+for NetWare. Also, the make process for NetWare port uses
miniperl.exe to run scripts during the make and installation process.
=head1 Authors
-Guruprasad S (sguruprasad@novell.com)
Anantha Kesari H Y (hyanantha@novell.com)
+Aditya C (caditya@novell.com)
=head1 Date
=item *
-Created - 18th Jan 2001
+Created - 18 Jan 2001
=item *
-Modified - 25th June 2001
+Modified - 25 June 2001
=item *
-Modified - 13 July 2001
+Modified - 13 July 2001
-=back
+=item *
+Modified - 8 May 2002
+
+=back
projects / p5sagit/p5-mst-13.2.git / commitdiff