X-Git-Url: http://git.shadowcat.co.uk/gitweb/gitweb.cgi?a=blobdiff_plain;f=vos%2Fconfig.h;h=55bb25f66ad67f05cd8bf613e2ff16e77c76e24e;hb=8c99d73ee7ce90de2561496f683f3850d1269e1d;hp=c1fdd06decf4e0919bc78d1ed8c6296b014e6025;hpb=cb50131aab68ac6dda048612c6e853b8cb08701e;p=p5sagit%2Fp5-mst-13.2.git diff --git a/vos/config.h b/vos/config.h index c1fdd06..55bb25f 100644 --- a/vos/config.h +++ b/vos/config.h @@ -358,6 +358,18 @@ */ #define HAS_MKTIME /**/ +/* HAS_MSYNC: + * This symbol, if defined, indicates that the msync system call is + * available to synchronize a mapped file. + */ +/*#define HAS_MSYNC /**/ + +/* HAS_MUNMAP: + * This symbol, if defined, indicates that the munmap system call is + * available to unmap a region, usually mapped by mmap(). + */ +/*#define HAS_MUNMAP /**/ + /* HAS_NICE: * This symbol, if defined, indicates that the nice routine is * available. @@ -980,6 +992,37 @@ */ #define STDCHAR unsigned char /**/ +/* CROSSCOMPILE: + * This symbol, if defined, signifies that we our + * build process is a cross-compilation. + */ +/*#define CROSSCOMPILE /**/ + +/* INTSIZE: + * This symbol contains the value of sizeof(int) so that the C + * preprocessor can make decisions based on it. + */ +/* LONGSIZE: + * This symbol contains the value of sizeof(long) so that the C + * preprocessor can make decisions based on it. + */ +/* SHORTSIZE: + * This symbol contains the value of sizeof(short) so that the C + * preprocessor can make decisions based on it. + */ +#define INTSIZE 4 /**/ +#define LONGSIZE 4 /**/ +#define SHORTSIZE 2 /**/ + +/* MULTIARCH: + * This symbol, if defined, signifies that the build + * process will produce some binary files that are going to be + * used in a cross-platform environment. This is the case for + * example with the NeXT "fat" binaries that contain executables + * for several CPUs. + */ +/*#define MULTIARCH /**/ + /* HAS_QUAD: * This symbol, if defined, tells that there's a 64-bit integer type, * Quad_t, and its unsigned counterpar, Uquad_t. QUADKIND will be one @@ -1020,41 +1063,17 @@ */ /*#define I_SYS_SECURITY /**/ -/* CROSSCOMPILE: - * This symbol, if defined, signifies that we our - * build process is a cross-compilation. - */ -/*#define CROSSCOMPILE /**/ - -/* INTSIZE: - * This symbol contains the value of sizeof(int) so that the C - * preprocessor can make decisions based on it. - */ -/* LONGSIZE: - * This symbol contains the value of sizeof(long) so that the C - * preprocessor can make decisions based on it. - */ -/* SHORTSIZE: - * This symbol contains the value of sizeof(short) so that the C - * preprocessor can make decisions based on it. - */ -#define INTSIZE 4 /**/ -#define LONGSIZE 4 /**/ -#define SHORTSIZE 2 /**/ - -/* MULTIARCH: - * This symbol, if defined, signifies that the build - * process will produce some binary files that are going to be - * used in a cross-platform environment. This is the case for - * example with the NeXT "fat" binaries that contain executables - * for several CPUs. +/* OSNAME: + * This symbol contains the name of the operating system, as determined + * by Configure. You shouldn't rely on it too much; the specific + * feature tests from Configure are generally more reliable. */ -/*#define MULTIARCH /**/ +#define OSNAME "VOS" /**/ /* MEM_ALIGNBYTES: * This symbol contains the number of bytes required to align a - * double. Usual values are 2, 4 and 8. The default is eight, - * for safety. + * double, or a long double when applicable. Usual values are 2, + * 4 and 8. The default is eight, for safety. */ #if defined(CROSSCOMPILE) || defined(MULTIARCH) # define MEM_ALIGNBYTES 8 @@ -1062,6 +1081,61 @@ #define MEM_ALIGNBYTES 8 #endif +/* ARCHLIB: + * This variable, if defined, holds the name of the directory in + * which the user wants to put architecture-dependent public + * library files for perl5. It is most often a local directory + * such as /usr/local/lib. Programs using this variable must be + * prepared to deal with filename expansion. If ARCHLIB is the + * same as PRIVLIB, it is not defined, since presumably the + * program already searches PRIVLIB. + */ +/* ARCHLIB_EXP: + * This symbol contains the ~name expanded version of ARCHLIB, to be used + * in programs that are not prepared to deal with ~ expansion at run-time. + */ +/*#define ARCHLIB "" /**/ +/*#define ARCHLIB_EXP "" /**/ + +/* ARCHNAME: + * This symbol holds a string representing the architecture name. + * It may be used to construct an architecture-dependant pathname + * where library files may be held under a private library, for + * instance. + */ +#define ARCHNAME "vos" /**/ + +/* HAS_ATOLF: + * This symbol, if defined, indicates that the atolf routine is + * available to convert strings into long doubles. + */ +/*#define HAS_ATOLF /**/ + +/* HAS_ATOLL: + * This symbol, if defined, indicates that the atoll routine is + * available to convert strings into long longs. + */ +/*#define HAS_ATOLL /**/ + +/* BIN: + * This symbol holds the path of the bin directory where the package will + * be installed. Program must be prepared to deal with ~name substitution. + */ +/* BIN_EXP: + * This symbol is the filename expanded version of the BIN symbol, for + * programs that do not want to deal with that at run-time. + */ +#define BIN "/system/ported/command_library" /**/ +#define BIN_EXP "/system/ported/command_library" /**/ + +/* PERL_BINCOMPAT_5005: + * This symbol, if defined, indicates that Perl 5.006 should be + * binary-compatible with Perl 5.005. This is impossible for builds + * that use features like threads and multiplicity it is always $undef + * for those versions. + */ +/*#define PERL_BINCOMPAT_5005 /**/ + /* BYTEORDER: * This symbol holds the hexadecimal constant defined in byteorder, * i.e. 0x1234 or 0x4321, etc... @@ -1105,6 +1179,67 @@ #define BYTEORDER 0x4321 /* large digits for MSB */ #endif /* NeXT */ +/* CAT2: + * This macro catenates 2 tokens together. + */ +/* STRINGIFY: + * This macro surrounds its token with double quotes. + */ +#if 42 == 1 +# define CAT2(a,b) a/**/b +# define STRINGIFY(a) "a" + /* If you can get stringification with catify, tell me how! */ +#endif +#if 42 == 42 +# define PeRl_CaTiFy(a, b) a ## b +# define PeRl_StGiFy(a) #a +/* the additional level of indirection enables these macros to be + * used as arguments to other macros. See K&R 2nd ed., page 231. */ +# define CAT2(a,b) PeRl_CaTiFy(a,b) +# define StGiFy(a) PeRl_StGiFy(a) +# define STRINGIFY(a) PeRl_StGiFy(a) +#endif +#if 42 != 1 && 42 != 42 +#include "Bletch: How does this C preprocessor catenate tokens?" +#endif + +/* CPPSTDIN: + * This symbol contains the first part of the string which will invoke + * the C preprocessor on the standard input and produce to standard + * output. Typical value of "cc -E" or "/lib/cpp", but it can also + * call a wrapper. See CPPRUN. + */ +/* CPPMINUS: + * This symbol contains the second part of the string which will invoke + * the C preprocessor on the standard input and produce to standard + * output. This symbol will have the value "-" if CPPSTDIN needs a minus + * to specify standard input, otherwise the value is "". + */ +/* CPPRUN: + * This symbol contains the string which will invoke a C preprocessor on + * the standard input and produce to standard output. It needs to end + * with CPPLAST, after all other preprocessor flags have been specified. + * The main difference with CPPSTDIN is that this program will never be a + * pointer to a shell wrapper, i.e. it will be empty if no preprocessor is + * available directly to the user. Note that it may well be different from + * the preprocessor used to compile the C program. + */ +/* CPPLAST: + * This symbol is intended to be used along with CPPRUN in the same manner + * symbol CPPMINUS is used with CPPSTDIN. It contains either "-" or "". + */ +#define CPPSTDIN "cc -E" +#define CPPMINUS "-" +#define CPPRUN "cc -E -" +#define CPPLAST "-" + +/* HAS_ACCESS: + * This manifest constant lets the C program know that the access() + * system call is available to check for accessibility using real UID/GID. + * (always present on UNIX.) + */ +/*#define HAS_ACCESS /**/ + /* CASTI32: * This symbol is defined if the C compiler can cast negative * or large floating point numbers to 32-bit ints. @@ -1132,482 +1267,132 @@ */ /*#define VOID_CLOSEDIR /**/ -/* HAS_FD_SET: - * This symbol, when defined, indicates presence of the fd_set typedef - * in +/* HAS_CSH: + * This symbol, if defined, indicates that the C-shell exists. */ -/*#define HAS_FD_SET /**/ +/* CSH: + * This symbol, if defined, contains the full pathname of csh. + */ +/*#define HAS_CSH /**/ +#ifdef HAS_CSH +#define CSH "" /**/ +#endif -/* Gconvert: - * This preprocessor macro is defined to convert a floating point - * number to a string without a trailing decimal point. This - * emulates the behavior of sprintf("%g"), but is sometimes much more - * efficient. If gconvert() is not available, but gcvt() drops the - * trailing decimal point, then gcvt() is used. If all else fails, - * a macro using sprintf("%g") is used. Arguments for the Gconvert - * macro are: value, number of digits, whether trailing zeros should - * be retained, and the output buffer. - * Possible values are: - * d_Gconvert='gconvert((x),(n),(t),(b))' - * d_Gconvert='gcvt((x),(n),(b))' - * d_Gconvert='sprintf((b),"%.*g",(n),(x))' - * The last two assume trailing zeros should not be kept. +/* DLSYM_NEEDS_UNDERSCORE: + * This symbol, if defined, indicates that we need to prepend an + * underscore to the symbol name before calling dlsym(). This only + * makes sense if you *have* dlsym, which we will presume is the + * case if you're using dl_dlopen.xs. */ -#define Gconvert(x,n,t,b) sprintf((b),"%.*g",(n),(x)) +/*#define DLSYM_NEEDS_UNDERSCORE /**/ -/* HAS_GNULIBC: - * This symbol, if defined, indicates to the C program that - * the GNU C library is being used. +/* HAS_DRAND48_PROTO: + * This symbol, if defined, indicates that the system provides + * a prototype for the drand48() function. Otherwise, it is up + * to the program to supply one. A good guess is + * extern double drand48 _((void)); */ -/*#define HAS_GNULIBC /**/ -/* HAS_ISASCII: - * This manifest constant lets the C program know that isascii - * is available. +/*#define HAS_DRAND48_PROTO /**/ + +/* HAS_ENDGRENT: + * This symbol, if defined, indicates that the getgrent routine is + * available for finalizing sequential access of the group database. */ -#define HAS_ISASCII /**/ +/*#define HAS_ENDGRENT /**/ -/* HAS_LCHOWN: - * This symbol, if defined, indicates that the lchown routine is - * available to operate on a symbolic link (instead of following the - * link). +/* HAS_ENDHOSTENT: + * This symbol, if defined, indicates that the endhostent() routine is + * available to close whatever was being used for host queries. */ -/*#define HAS_LCHOWN /**/ +#define HAS_ENDHOSTENT /**/ -/* HAS_OPEN3: - * This manifest constant lets the C program know that the three - * argument form of open(2) is available. +/* HAS_ENDNETENT: + * This symbol, if defined, indicates that the endnetent() routine is + * available to close whatever was being used for network queries. */ -#define HAS_OPEN3 /**/ +#define HAS_ENDNETENT /**/ -/* HAS_SAFE_BCOPY: - * This symbol, if defined, indicates that the bcopy routine is available - * to copy potentially overlapping memory blocks. Otherwise you should - * probably use memmove() or memcpy(). If neither is defined, roll your - * own version. +/* HAS_ENDPROTOENT: + * This symbol, if defined, indicates that the endprotoent() routine is + * available to close whatever was being used for protocol queries. */ -/*#define HAS_SAFE_BCOPY /**/ +#define HAS_ENDPROTOENT /**/ -/* HAS_SAFE_MEMCPY: - * This symbol, if defined, indicates that the memcpy routine is available - * to copy potentially overlapping memory blocks. Otherwise you should - * probably use memmove() or memcpy(). If neither is defined, roll your - * own version. - */ -/*#define HAS_SAFE_MEMCPY /**/ - -/* HAS_SANE_MEMCMP: - * This symbol, if defined, indicates that the memcmp routine is available - * and can be used to compare relative magnitudes of chars with their high - * bits set. If it is not defined, roll your own version. - */ -#define HAS_SANE_MEMCMP /**/ - -/* HAS_SIGACTION: - * This symbol, if defined, indicates that Vr4's sigaction() routine - * is available. - */ -/*#define HAS_SIGACTION /**/ - -/* HAS_SIGSETJMP: - * This variable indicates to the C program that the sigsetjmp() - * routine is available to save the calling process's registers - * and stack environment for later use by siglongjmp(), and - * to optionally save the process's signal mask. See - * Sigjmp_buf, Sigsetjmp, and Siglongjmp. - */ -/* Sigjmp_buf: - * This is the buffer type to be used with Sigsetjmp and Siglongjmp. - */ -/* Sigsetjmp: - * This macro is used in the same way as sigsetjmp(), but will invoke - * traditional setjmp() if sigsetjmp isn't available. - * See HAS_SIGSETJMP. - */ -/* Siglongjmp: - * This macro is used in the same way as siglongjmp(), but will invoke - * traditional longjmp() if siglongjmp isn't available. - * See HAS_SIGSETJMP. - */ -/*#define HAS_SIGSETJMP /**/ -#ifdef HAS_SIGSETJMP -#define Sigjmp_buf sigjmp_buf -#define Sigsetjmp(buf,save_mask) sigsetjmp((buf),(save_mask)) -#define Siglongjmp(buf,retval) siglongjmp((buf),(retval)) -#else -#define Sigjmp_buf jmp_buf -#define Sigsetjmp(buf,save_mask) setjmp((buf)) -#define Siglongjmp(buf,retval) longjmp((buf),(retval)) -#endif - -/* USE_STDIO_PTR: - * This symbol is defined if the _ptr and _cnt fields (or similar) - * of the stdio FILE structure can be used to access the stdio buffer - * for a file handle. If this is defined, then the FILE_ptr(fp) - * and FILE_cnt(fp) macros will also be defined and should be used - * to access these fields. - */ -/* FILE_ptr: - * This macro is used to access the _ptr field (or equivalent) of the - * FILE structure pointed to by its argument. This macro will always be - * defined if USE_STDIO_PTR is defined. - */ -/* STDIO_PTR_LVALUE: - * This symbol is defined if the FILE_ptr macro can be used as an - * lvalue. - */ -/* FILE_cnt: - * This macro is used to access the _cnt field (or equivalent) of the - * FILE structure pointed to by its argument. This macro will always be - * defined if USE_STDIO_PTR is defined. - */ -/* STDIO_CNT_LVALUE: - * This symbol is defined if the FILE_cnt macro can be used as an - * lvalue. - */ -#define USE_STDIO_PTR /**/ -#ifdef USE_STDIO_PTR -#define FILE_ptr(fp) ((fp)->_ptr) -#define STDIO_PTR_LVALUE /**/ -#define FILE_cnt(fp) ((fp)->_cnt) -#define STDIO_CNT_LVALUE /**/ -#endif - -/* USE_STDIO_BASE: - * This symbol is defined if the _base field (or similar) of the - * stdio FILE structure can be used to access the stdio buffer for - * a file handle. If this is defined, then the FILE_base(fp) macro - * will also be defined and should be used to access this field. - * Also, the FILE_bufsiz(fp) macro will be defined and should be used - * to determine the number of bytes in the buffer. USE_STDIO_BASE - * will never be defined unless USE_STDIO_PTR is. - */ -/* FILE_base: - * This macro is used to access the _base field (or equivalent) of the - * FILE structure pointed to by its argument. This macro will always be - * defined if USE_STDIO_BASE is defined. - */ -/* FILE_bufsiz: - * This macro is used to determine the number of bytes in the I/O - * buffer pointed to by _base field (or equivalent) of the FILE - * structure pointed to its argument. This macro will always be defined - * if USE_STDIO_BASE is defined. - */ -#define USE_STDIO_BASE /**/ -#ifdef USE_STDIO_BASE -#define FILE_base(fp) ((fp)->_base) -#define FILE_bufsiz(fp) ((fp)->_cnt + (fp)->_ptr - (fp)->_base) -#endif - -/* HAS_VPRINTF: - * This symbol, if defined, indicates that the vprintf routine is available - * to printf with a pointer to an argument list. If unavailable, you - * may need to write your own, probably in terms of _doprnt(). - */ -/* USE_CHAR_VSPRINTF: - * This symbol is defined if this system has vsprintf() returning type - * (char*). The trend seems to be to declare it as "int vsprintf()". It - * is up to the package author to declare vsprintf correctly based on the - * symbol. - */ -#define HAS_VPRINTF /**/ -/*#define USE_CHAR_VSPRINTF /**/ - -/* DOUBLESIZE: - * This symbol contains the size of a double, so that the C preprocessor - * can make decisions based on it. - */ -#define DOUBLESIZE 8 /**/ - -/* I_TIME: - * This symbol, if defined, indicates to the C program that it should - * include . - */ -/* I_SYS_TIME: - * This symbol, if defined, indicates to the C program that it should - * include . - */ -/* I_SYS_TIME_KERNEL: - * This symbol, if defined, indicates to the C program that it should - * include with KERNEL defined. - */ -/*#define I_TIME /**/ -#define I_SYS_TIME /**/ -/*#define I_SYS_TIME_KERNEL /**/ - -/* VAL_O_NONBLOCK: - * This symbol is to be used during open() or fcntl(F_SETFL) to turn on - * non-blocking I/O for the file descriptor. Note that there is no way - * back, i.e. you cannot turn it blocking again this way. If you wish to - * alternatively switch between blocking and non-blocking, use the - * ioctl(FIOSNBIO) call instead, but that is not supported by all devices. - */ -/* VAL_EAGAIN: - * This symbol holds the errno error code set by read() when no data was - * present on the non-blocking file descriptor. - */ -/* RD_NODATA: - * This symbol holds the return code from read() when no data is present - * on the non-blocking file descriptor. Be careful! If EOF_NONBLOCK is - * not defined, then you can't distinguish between no data and EOF by - * issuing a read(). You'll have to find another way to tell for sure! - */ -/* EOF_NONBLOCK: - * This symbol, if defined, indicates to the C program that a read() on - * a non-blocking file descriptor will return 0 on EOF, and not the value - * held in RD_NODATA (-1 usually, in that case!). - */ -#define VAL_O_NONBLOCK O_NONBLOCK -#define VAL_EAGAIN EAGAIN -#define RD_NODATA -1 -#define EOF_NONBLOCK - -/* PTRSIZE: - * This symbol contains the size of a pointer, so that the C preprocessor - * can make decisions based on it. It will be sizeof(void *) if - * the compiler supports (void *); otherwise it will be - * sizeof(char *). - */ -#define PTRSIZE 4 /**/ - -/* Drand01: - * This macro is to be used to generate uniformly distributed - * random numbers over the range [0., 1.[. You may have to supply - * an 'extern double drand48();' in your program since SunOS 4.1.3 - * doesn't provide you with anything relevant in it's headers. - * See HAS_DRAND48_PROTO. - */ -/* Rand_seed_t: - * This symbol defines the type of the argument of the - * random seed function. - */ -/* seedDrand01: - * This symbol defines the macro to be used in seeding the - * random number generator (see Drand01). - */ -/* RANDBITS: - * This symbol indicates how many bits are produced by the - * function used to generate normalized random numbers. - * Values include 15, 16, 31, and 48. - */ -#define Drand01() rand()/(RAND_MAX+1) /**/ -#define Rand_seed_t unsigned int /**/ -#define seedDrand01(x) srand((Rand_seed_t)x) /**/ -#define RANDBITS 15 /**/ - -/* SSize_t: - * This symbol holds the type used by functions that return - * a count of bytes or an error condition. It must be a signed type. - * It is usually ssize_t, but may be long or int, etc. - * It may be necessary to include or - * to get any typedef'ed information. - * We will pick a type such that sizeof(SSize_t) == sizeof(Size_t). - */ -#define SSize_t ssize_t /* signed count of bytes */ - -/* EBCDIC: - * This symbol, if defined, indicates that this system uses - * EBCDIC encoding. - */ -/*#define EBCDIC /**/ - -/* ARCHLIB: - * This variable, if defined, holds the name of the directory in - * which the user wants to put architecture-dependent public - * library files for perl5. It is most often a local directory - * such as /usr/local/lib. Programs using this variable must be - * prepared to deal with filename expansion. If ARCHLIB is the - * same as PRIVLIB, it is not defined, since presumably the - * program already searches PRIVLIB. - */ -/* ARCHLIB_EXP: - * This symbol contains the ~name expanded version of ARCHLIB, to be used - * in programs that are not prepared to deal with ~ expansion at run-time. - */ -/*#define ARCHLIB "" /**/ -/*#define ARCHLIB_EXP "" /**/ - -/* BIN: - * This symbol holds the path of the bin directory where the package will - * be installed. Program must be prepared to deal with ~name substitution. - */ -/* BIN_EXP: - * This symbol is the filename expanded version of the BIN symbol, for - * programs that do not want to deal with that at run-time. - */ -#define BIN "/system/ported/command_library" /**/ -#define BIN_EXP "/system/ported/command_library" /**/ - -/* INSTALL_USR_BIN_PERL: - * This symbol, if defined, indicates that Perl is to be installed - * also as /usr/bin/perl. - */ -/*#define INSTALL_USR_BIN_PERL /**/ - -/* PRIVLIB: - * This symbol contains the name of the private library for this package. - * The library is private in the sense that it needn't be in anyone's - * execution path, but it should be accessible by the world. The program - * should be prepared to do ~ expansion. - */ -/* PRIVLIB_EXP: - * This symbol contains the ~name expanded version of PRIVLIB, to be used - * in programs that are not prepared to deal with ~ expansion at run-time. - */ -#define PRIVLIB "/system/ported/perl/lib/5.005" /**/ -#define PRIVLIB_EXP "/system/ported/perl/lib/5.005" /**/ - -/* SITEARCH: - * This symbol contains the name of the private library for this package. - * The library is private in the sense that it needn't be in anyone's - * execution path, but it should be accessible by the world. The program - * should be prepared to do ~ expansion. - * The standard distribution will put nothing in this directory. - * After perl has been installed, users may install their own local - * architecture-dependent modules in this directory with - * MakeMaker Makefile.PL - * or equivalent. See INSTALL for details. - */ -/* SITEARCH_EXP: - * This symbol contains the ~name expanded version of SITEARCH, to be used - * in programs that are not prepared to deal with ~ expansion at run-time. - */ -/*#define SITEARCH "" /**/ -/*#define SITEARCH_EXP "" /**/ - -/* SITELIB: - * This symbol contains the name of the private library for this package. - * The library is private in the sense that it needn't be in anyone's - * execution path, but it should be accessible by the world. The program - * should be prepared to do ~ expansion. - * The standard distribution will put nothing in this directory. - * After perl has been installed, users may install their own local - * architecture-independent modules in this directory with - * MakeMaker Makefile.PL - * or equivalent. See INSTALL for details. - */ -/* SITELIB_EXP: - * This symbol contains the ~name expanded version of SITELIB, to be used - * in programs that are not prepared to deal with ~ expansion at run-time. - */ -#define SITELIB "/system/ported/perl/lib/site/5.005" /**/ -#define SITELIB_EXP "/system/ported/perl/lib/site/5.005" /**/ - -/* PERL_VENDORLIB_EXP: - * This symbol contains the ~name expanded version of VENDORLIB, to be used - * in programs that are not prepared to deal with ~ expansion at run-time. - */ -#define PERL_VENDORLIB_EXP "" /**/ - -/* OSNAME: - * This symbol contains the name of the operating system, as determined - * by Configure. You shouldn't rely on it too much; the specific - * feature tests from Configure are generally more reliable. +/* HAS_ENDPWENT: + * This symbol, if defined, indicates that the getgrent routine is + * available for finalizing sequential access of the passwd database. */ -#define OSNAME "VOS" /**/ +/*#define HAS_ENDPWENT /**/ -/* CAT2: - * This macro catenates 2 tokens together. - */ -/* STRINGIFY: - * This macro surrounds its token with double quotes. +/* HAS_ENDSERVENT: + * This symbol, if defined, indicates that the endservent() routine is + * available to close whatever was being used for service queries. */ -#if 42 == 1 -#define CAT2(a,b)a/**/b -#define STRINGIFY(a)"a" - /* If you can get stringification with catify, tell me how! */ -#endif -#if 42 == 42 -#define CAT2(a,b)a ## b -#define StGiFy(a)# a -#define STRINGIFY(a)StGiFy(a) -#endif -#if 42 != 1 && 42 != 42 -#include "Bletch: How does this C preprocessor catenate tokens?" -#endif +#define HAS_ENDSERVENT /**/ -/* CPPSTDIN: - * This symbol contains the first part of the string which will invoke - * the C preprocessor on the standard input and produce to standard - * output. Typical value of "cc -E" or "/lib/cpp", but it can also - * call a wrapper. See CPPRUN. - */ -/* CPPMINUS: - * This symbol contains the second part of the string which will invoke - * the C preprocessor on the standard input and produce to standard - * output. This symbol will have the value "-" if CPPSTDIN needs a minus - * to specify standard input, otherwise the value is "". - */ -/* CPPRUN: - * This symbol contains the string which will invoke a C preprocessor on - * the standard input and produce to standard output. It needs to end - * with CPPLAST, after all other preprocessor flags have been specified. - * The main difference with CPPSTDIN is that this program will never be a - * pointer to a shell wrapper, i.e. it will be empty if no preprocessor is - * available directly to the user. Note that it may well be different from - * the preprocessor used to compile the C program. - */ -/* CPPLAST: - * This symbol is intended to be used along with CPPRUN in the same manner - * symbol CPPMINUS is used with CPPSTDIN. It contains either "-" or "". +/* HAS_ENDSPENT: + * This symbol, if defined, indicates that the endspent system call is + * available to finalize the scan of SysV shadow password entries. */ -#define CPPSTDIN "cc -E" -#define CPPMINUS "-" -#define CPPRUN "cc -E -" -#define CPPLAST "-" +/*#define HAS_ENDSPENT /**/ -/* HAS_ACCESS: - * This manifest constant lets the C program know that the access() - * system call is available to check for accessibility using real UID/GID. - * (always present on UNIX.) +/* HAS_FD_SET: + * This symbol, when defined, indicates presence of the fd_set typedef + * in */ -/*#define HAS_ACCESS /**/ +/*#define HAS_FD_SET /**/ -/* HAS_CSH: - * This symbol, if defined, indicates that the C-shell exists. - */ -/* CSH: - * This symbol, if defined, contains the full pathname of csh. +/* HAS_FPOS64_T: + * This symbol will be defined if the C compiler supports fpos64_t. */ -/*#define HAS_CSH /**/ -#ifdef HAS_CSH -#define CSH "" /**/ -#endif +/*#define HAS_FPOS64_T /**/ -/* HAS_ENDGRENT: - * This symbol, if defined, indicates that the getgrent routine is - * available for finalizing sequential access of the group database. +/* HAS_STRUCT_FS_DATA: + * This symbol, if defined, indicates that the struct fs_data + * to do statfs() is supported. */ -/*#define HAS_ENDGRENT /**/ +/*#define HAS_STRUCT_FS_DATA /**/ -/* HAS_ENDHOSTENT: - * This symbol, if defined, indicates that the endhostent() routine is - * available to close whatever was being used for host queries. +/* HAS_FSEEKO: + * This symbol, if defined, indicates that the fseeko routine is + * available to fseek beyond 32 bits (useful for ILP32 hosts). */ -#define HAS_ENDHOSTENT /**/ +/*#define HAS_FSEEKO /**/ -/* HAS_ENDNETENT: - * This symbol, if defined, indicates that the endnetent() routine is - * available to close whatever was being used for network queries. +/* HAS_FSTATFS: + * This symbol, if defined, indicates that the fstatfs routine is + * available to stat filesystems by file descriptors. */ -#define HAS_ENDNETENT /**/ +/*#define HAS_FSTATFS /**/ -/* HAS_ENDPROTOENT: - * This symbol, if defined, indicates that the endprotoent() routine is - * available to close whatever was being used for protocol queries. +/* HAS_FTELLO: + * This symbol, if defined, indicates that the ftello routine is + * available to ftell beyond 32 bits (useful for ILP32 hosts). */ -#define HAS_ENDPROTOENT /**/ +/*#define HAS_FTELLO /**/ -/* HAS_ENDPWENT: - * This symbol, if defined, indicates that the getgrent routine is - * available for finalizing sequential access of the passwd database. +/* Gconvert: + * This preprocessor macro is defined to convert a floating point + * number to a string without a trailing decimal point. This + * emulates the behavior of sprintf("%g"), but is sometimes much more + * efficient. If gconvert() is not available, but gcvt() drops the + * trailing decimal point, then gcvt() is used. If all else fails, + * a macro using sprintf("%g") is used. Arguments for the Gconvert + * macro are: value, number of digits, whether trailing zeros should + * be retained, and the output buffer. + * Possible values are: + * d_Gconvert='gconvert((x),(n),(t),(b))' + * d_Gconvert='gcvt((x),(n),(b))' + * d_Gconvert='sprintf((b),"%.*g",(n),(x))' + * The last two assume trailing zeros should not be kept. */ -/*#define HAS_ENDPWENT /**/ +#define Gconvert(x,n,t,b) sprintf((b),"%.*g",(n),(x)) -/* HAS_ENDSERVENT: - * This symbol, if defined, indicates that the endservent() routine is - * available to close whatever was being used for service queries. +/* HAS_GETCWD: + * This symbol, if defined, indicates that the getcwd routine is + * available to get the current working directory. */ -#define HAS_ENDSERVENT /**/ +#define HAS_GETCWD /**/ /* HAS_GETGRENT: * This symbol, if defined, indicates that the getgrent routine is @@ -1657,559 +1442,393 @@ */ #define HAS_GETHOSTNAME /**/ #define HAS_UNAME /**/ -/*#define HAS_PHOSTNAME /**/ +/*#define HAS_PHOSTNAME /**/ #ifdef HAS_PHOSTNAME #define PHOSTNAME "" /* How to get the host name */ #endif -/* HAS_GETNETBYADDR: - * This symbol, if defined, indicates that the getnetbyaddr() routine is - * available to look up networks by their IP addresses. - */ -#define HAS_GETNETBYADDR /**/ - -/* HAS_GETNETBYNAME: - * This symbol, if defined, indicates that the getnetbyname() routine is - * available to look up networks by their names. - */ -#define HAS_GETNETBYNAME /**/ - -/* HAS_GETNETENT: - * This symbol, if defined, indicates that the getnetent() routine is - * available to look up network names in some data base or another. - */ -#define HAS_GETNETENT /**/ - -/* HAS_GETPROTOENT: - * This symbol, if defined, indicates that the getprotoent() routine is - * available to look up protocols in some data base or another. - */ -#define HAS_GETPROTOENT /**/ - -/* HAS_GETPROTOBYNAME: - * This symbol, if defined, indicates that the getprotobyname() - * routine is available to look up protocols by their name. - */ -/* HAS_GETPROTOBYNUMBER: - * This symbol, if defined, indicates that the getprotobynumber() - * routine is available to look up protocols by their number. - */ -#define HAS_GETPROTOBYNAME /**/ -#define HAS_GETPROTOBYNUMBER /**/ - -/* HAS_GETPWENT: - * This symbol, if defined, indicates that the getpwent routine is - * available for sequential access of the passwd database. - * If this is not available, the older getpw() function may be available. - */ -/*#define HAS_GETPWENT /**/ - -/* HAS_GETSERVENT: - * This symbol, if defined, indicates that the getservent() routine is - * available to look up network services in some data base or another. - */ -#define HAS_GETSERVENT /**/ - -/* HAS_GETSERVBYNAME: - * This symbol, if defined, indicates that the getservbyname() - * routine is available to look up services by their name. - */ -/* HAS_GETSERVBYPORT: - * This symbol, if defined, indicates that the getservbyport() - * routine is available to look up services by their port. - */ -#define HAS_GETSERVBYNAME /**/ -#define HAS_GETSERVBYPORT /**/ - -/* HAS_HTONL: - * This symbol, if defined, indicates that the htonl() routine (and - * friends htons() ntohl() ntohs()) are available to do network - * order byte swapping. - */ -/* HAS_HTONS: - * This symbol, if defined, indicates that the htons() routine (and - * friends htonl() ntohl() ntohs()) are available to do network - * order byte swapping. - */ -/* HAS_NTOHL: - * This symbol, if defined, indicates that the ntohl() routine (and - * friends htonl() htons() ntohs()) are available to do network - * order byte swapping. - */ -/* HAS_NTOHS: - * This symbol, if defined, indicates that the ntohs() routine (and - * friends htonl() htons() ntohl()) are available to do network - * order byte swapping. - */ -#define HAS_HTONL /**/ -#define HAS_HTONS /**/ -#define HAS_NTOHL /**/ -#define HAS_NTOHS /**/ - -/* HAS_LONG_DOUBLE: - * This symbol will be defined if the C compiler supports long - * doubles. - */ -/* LONG_DOUBLESIZE: - * This symbol contains the size of a long double, so that the - * C preprocessor can make decisions based on it. It is only - * defined if the system supports long doubles. - */ -#define HAS_LONG_DOUBLE /**/ -#ifdef HAS_LONG_DOUBLE -#define LONG_DOUBLESIZE 8 /**/ -#endif - -/* HAS_LONG_LONG: - * This symbol will be defined if the C compiler supports long long. - */ -/* LONGLONGSIZE: - * This symbol contains the size of a long long, so that the - * C preprocessor can make decisions based on it. It is only - * defined if the system supports long long. - */ -/*#define HAS_LONG_LONG /**/ -#ifdef HAS_LONG_LONG -#define LONGLONGSIZE _error_ /**/ -#endif - -/* HAS_MEMCHR: - * This symbol, if defined, indicates that the memchr routine is available - * to locate characters within a C string. - */ -#define HAS_MEMCHR /**/ - -/* HAS_MSG: - * This symbol, if defined, indicates that the entire msg*(2) library is - * supported (IPC mechanism based on message queues). - */ -/*#define HAS_MSG /**/ - -/* HAS_SEM: - * This symbol, if defined, indicates that the entire sem*(2) library is - * supported. - */ -/*#define HAS_SEM /**/ - -/* HAS_SETGRENT: - * This symbol, if defined, indicates that the setgrent routine is - * available for initializing sequential access of the group database. - */ -/*#define HAS_SETGRENT /**/ - -/* HAS_SETGROUPS: - * This symbol, if defined, indicates that the setgroups() routine is - * available to set the list of process groups. If unavailable, multiple - * groups are probably not supported. - */ -/*#define HAS_SETGROUPS /**/ - -/* HAS_SETHOSTENT: - * This symbol, if defined, indicates that the sethostent() routine is - * available. - */ -#define HAS_SETHOSTENT /**/ - -/* HAS_SETNETENT: - * This symbol, if defined, indicates that the setnetent() routine is - * available. - */ -#define HAS_SETNETENT /**/ - -/* HAS_SETPROTOENT: - * This symbol, if defined, indicates that the setprotoent() routine is - * available. - */ -#define HAS_SETPROTOENT /**/ - -/* HAS_SETPWENT: - * This symbol, if defined, indicates that the setpwent routine is - * available for initializing sequential access of the passwd database. - */ -/*#define HAS_SETPWENT /**/ - -/* HAS_SETSERVENT: - * This symbol, if defined, indicates that the setservent() routine is - * available. - */ -#define HAS_SETSERVENT /**/ - -/* HAS_SETVBUF: - * This symbol, if defined, indicates that the setvbuf routine is - * available to change buffering on an open stdio stream. - * to a line-buffered mode. - */ -#define HAS_SETVBUF /**/ - -/* HAS_SHM: - * This symbol, if defined, indicates that the entire shm*(2) library is - * supported. +/* HAS_GETHOST_PROTOS: + * This symbol, if defined, indicates that includes + * prototypes for gethostent(), gethostbyname(), and + * gethostbyaddr(). Otherwise, it is up to the program to guess + * them. See netdbtype.U for probing for various Netdb_xxx_t types. */ -/*#define HAS_SHM /**/ +#define HAS_GETHOST_PROTOS /**/ -/* HAS_SOCKET: - * This symbol, if defined, indicates that the BSD socket interface is - * supported. - */ -/* HAS_SOCKETPAIR: - * This symbol, if defined, indicates that the BSD socketpair() call is - * supported. - */ -/* HAS_MSG_CTRUNC: - * This symbol, if defined, indicates that the MSG_CTRUNC is supported. - * Checking just with #ifdef might not be enough because this symbol - * has been known to be an enum. - */ -/* HAS_MSG_DONTROUTE: - * This symbol, if defined, indicates that the MSG_DONTROUTE is supported. - * Checking just with #ifdef might not be enough because this symbol - * has been known to be an enum. - */ -/* HAS_MSG_OOB: - * This symbol, if defined, indicates that the MSG_OOB is supported. - * Checking just with #ifdef might not be enough because this symbol - * has been known to be an enum. +/* HAS_GETMNT: + * This symbol, if defined, indicates that the getmnt routine is + * available to get filesystem mount info by filename. */ -/* HAS_MSG_PEEK: - * This symbol, if defined, indicates that the MSG_PEEK is supported. - * Checking just with #ifdef might not be enough because this symbol - * has been known to be an enum. +/*#define HAS_GETMNT /**/ + +/* HAS_GETMNTENT: + * This symbol, if defined, indicates that the getmntent routine is + * available to iterate through mounted file systems to get their info. */ -/* HAS_MSG_PROXY: - * This symbol, if defined, indicates that the MSG_PROXY is supported. - * Checking just with #ifdef might not be enough because this symbol - * has been known to be an enum. +/*#define HAS_GETMNTENT /**/ + +/* HAS_GETNETBYADDR: + * This symbol, if defined, indicates that the getnetbyaddr() routine is + * available to look up networks by their IP addresses. */ -/* HAS_SCM_RIGHTS: - * This symbol, if defined, indicates that the SCM_RIGHTS is supported. - * Checking just with #ifdef might not be enough because this symbol - * has been known to be an enum. +#define HAS_GETNETBYADDR /**/ + +/* HAS_GETNETBYNAME: + * This symbol, if defined, indicates that the getnetbyname() routine is + * available to look up networks by their names. */ -#define HAS_SOCKET /**/ -/*#define HAS_SOCKETPAIR /**/ -/*#define HAS_MSG_CTRUNC /**/ -/*#define HAS_MSG_DONTROUTE /**/ -/*#define HAS_MSG_OOB /**/ -/*#define HAS_MSG_PEEK /**/ -/*#define HAS_MSG_PROXY /**/ -/*#define HAS_SCM_RIGHTS /**/ +#define HAS_GETNETBYNAME /**/ -/* USE_STAT_BLOCKS: - * This symbol is defined if this system has a stat structure declaring - * st_blksize and st_blocks. +/* HAS_GETNETENT: + * This symbol, if defined, indicates that the getnetent() routine is + * available to look up network names in some data base or another. */ -#ifndef USE_STAT_BLOCKS -/*#define USE_STAT_BLOCKS /**/ -#endif +#define HAS_GETNETENT /**/ -/* HAS_STRERROR: - * This symbol, if defined, indicates that the strerror routine is - * available to translate error numbers to strings. See the writeup - * of Strerror() in this file before you try to define your own. +/* HAS_GETNET_PROTOS: + * This symbol, if defined, indicates that includes + * prototypes for getnetent(), getnetbyname(), and + * getnetbyaddr(). Otherwise, it is up to the program to guess + * them. See netdbtype.U for probing for various Netdb_xxx_t types. */ -/* HAS_SYS_ERRLIST: - * This symbol, if defined, indicates that the sys_errlist array is - * available to translate error numbers to strings. The extern int - * sys_nerr gives the size of that table. +#define HAS_GETNET_PROTOS /**/ + +/* HAS_GETPROTOENT: + * This symbol, if defined, indicates that the getprotoent() routine is + * available to look up protocols in some data base or another. */ -/* Strerror: - * This preprocessor symbol is defined as a macro if strerror() is - * not available to translate error numbers to strings but sys_errlist[] - * array is there. +#define HAS_GETPROTOENT /**/ + +/* HAS_GETPROTOBYNAME: + * This symbol, if defined, indicates that the getprotobyname() + * routine is available to look up protocols by their name. */ -#define HAS_STRERROR /**/ -#define HAS_SYS_ERRLIST /**/ -#define Strerror(e) strerror(e) +/* HAS_GETPROTOBYNUMBER: + * This symbol, if defined, indicates that the getprotobynumber() + * routine is available to look up protocols by their number. + */ +#define HAS_GETPROTOBYNAME /**/ +#define HAS_GETPROTOBYNUMBER /**/ -/* HAS_UNION_SEMUN: - * This symbol, if defined, indicates that the union semun is - * defined by including . If not, the user code - * probably needs to define it as: - * union semun { - * int val; - * struct semid_ds *buf; - * unsigned short *array; - * } +/* HAS_GETPROTO_PROTOS: + * This symbol, if defined, indicates that includes + * prototypes for getprotoent(), getprotobyname(), and + * getprotobyaddr(). Otherwise, it is up to the program to guess + * them. See netdbtype.U for probing for various Netdb_xxx_t types. */ -/* USE_SEMCTL_SEMUN: - * This symbol, if defined, indicates that union semun is - * used for semctl IPC_STAT. +#define HAS_GETPROTO_PROTOS /**/ + +/* HAS_GETPWENT: + * This symbol, if defined, indicates that the getpwent routine is + * available for sequential access of the passwd database. + * If this is not available, the older getpw() function may be available. */ -/* USE_SEMCTL_SEMID_DS: - * This symbol, if defined, indicates that struct semid_ds * is - * used for semctl IPC_STAT. +/*#define HAS_GETPWENT /**/ + +/* HAS_GETSERVENT: + * This symbol, if defined, indicates that the getservent() routine is + * available to look up network services in some data base or another. */ -/*#define HAS_UNION_SEMUN /**/ -/*#define USE_SEMCTL_SEMUN /**/ -/*#define USE_SEMCTL_SEMID_DS /**/ +#define HAS_GETSERVENT /**/ -/* HAS_VFORK: - * This symbol, if defined, indicates that vfork() exists. +/* HAS_GETSERV_PROTOS: + * This symbol, if defined, indicates that includes + * prototypes for getservent(), getservbyname(), and + * getservbyaddr(). Otherwise, it is up to the program to guess + * them. See netdbtype.U for probing for various Netdb_xxx_t types. */ -/*#define HAS_VFORK /**/ +#define HAS_GETSERV_PROTOS /**/ -/* Signal_t: - * This symbol's value is either "void" or "int", corresponding to the - * appropriate return type of a signal handler. Thus, you can declare - * a signal handler using "Signal_t (*handler)()", and define the - * handler using "Signal_t handler(sig)". +/* HAS_GETSPENT: + * This symbol, if defined, indicates that the getspent system call is + * available to retrieve SysV shadow password entries sequentially. */ -#define Signal_t void /* Signal handler's return type */ +/*#define HAS_GETSPENT /**/ -/* Groups_t: - * This symbol holds the type used for the second argument to - * getgroups() and setgropus(). Usually, this is the same as - * gidtype (gid_t) , but sometimes it isn't. - * It can be int, ushort, uid_t, etc... - * It may be necessary to include to get any - * typedef'ed information. This is only required if you have - * getgroups() or setgropus().. +/* HAS_GETSPNAM: + * This symbol, if defined, indicates that the getspnam system call is + * available to retrieve SysV shadow password entries by name. */ -#if defined(HAS_GETGROUPS) || defined(HAS_SETGROUPS) -#define Groups_t gid_t /* Type for 2nd arg to [sg]etgroups() */ -#endif +/*#define HAS_GETSPNAM /**/ -/* I_GRP: - * This symbol, if defined, indicates to the C program that it should - * include . +/* HAS_GETSERVBYNAME: + * This symbol, if defined, indicates that the getservbyname() + * routine is available to look up services by their name. */ -/* GRPASSWD: - * This symbol, if defined, indicates to the C program that struct group - * in contains gr_passwd. +/* HAS_GETSERVBYPORT: + * This symbol, if defined, indicates that the getservbyport() + * routine is available to look up services by their port. */ -/*#define I_GRP /**/ -/*#define GRPASSWD /**/ +#define HAS_GETSERVBYNAME /**/ +#define HAS_GETSERVBYPORT /**/ -/* I_NETDB: - * This symbol, if defined, indicates that exists and - * should be included. +/* HAS_GNULIBC: + * This symbol, if defined, indicates to the C program that + * the GNU C library is being used. */ -#define I_NETDB /**/ +/*#define HAS_GNULIBC /**/ +#if defined(HAS_GNULIBC) && !defined(_GNU_SOURCE) +# define _GNU_SOURCE +#endif +/* HAS_HASMNTOPT: + * This symbol, if defined, indicates that the hasmntopt routine is + * available to query the mount options of file systems. + */ +/*#define HAS_HASMNTOPT /**/ -/* I_PWD: - * This symbol, if defined, indicates to the C program that it should - * include . +/* HAS_HTONL: + * This symbol, if defined, indicates that the htonl() routine (and + * friends htons() ntohl() ntohs()) are available to do network + * order byte swapping. */ -/* PWQUOTA: - * This symbol, if defined, indicates to the C program that struct passwd - * contains pw_quota. +/* HAS_HTONS: + * This symbol, if defined, indicates that the htons() routine (and + * friends htonl() ntohl() ntohs()) are available to do network + * order byte swapping. */ -/* PWAGE: - * This symbol, if defined, indicates to the C program that struct passwd - * contains pw_age. +/* HAS_NTOHL: + * This symbol, if defined, indicates that the ntohl() routine (and + * friends htonl() htons() ntohs()) are available to do network + * order byte swapping. */ -/* PWCHANGE: - * This symbol, if defined, indicates to the C program that struct passwd - * contains pw_change. +/* HAS_NTOHS: + * This symbol, if defined, indicates that the ntohs() routine (and + * friends htonl() htons() ntohl()) are available to do network + * order byte swapping. */ -/* PWCLASS: - * This symbol, if defined, indicates to the C program that struct passwd - * contains pw_class. +#define HAS_HTONL /**/ +#define HAS_HTONS /**/ +#define HAS_NTOHL /**/ +#define HAS_NTOHS /**/ + +/* HAS_ICONV: + * This symbol, if defined, indicates that the iconv routine is + * available to do character set conversions. */ -/* PWEXPIRE: - * This symbol, if defined, indicates to the C program that struct passwd - * contains pw_expire. +/*#define HAS_ICONV /**/ + +/* HAS_INT64_T: + * This symbol will defined if the C compiler supports int64_t. + * Usually the needs to be included, but sometimes + * is enough. */ -/* PWCOMMENT: - * This symbol, if defined, indicates to the C program that struct passwd - * contains pw_comment. +/*#define HAS_INT64_T /**/ + +/* HAS_ISASCII: + * This manifest constant lets the C program know that isascii + * is available. */ -/* PWGECOS: - * This symbol, if defined, indicates to the C program that struct passwd - * contains pw_gecos. +#define HAS_ISASCII /**/ + +/* HAS_LCHOWN: + * This symbol, if defined, indicates that the lchown routine is + * available to operate on a symbolic link (instead of following the + * link). + */ +/*#define HAS_LCHOWN /**/ + +/* HAS_LDBL_DIG: + * This symbol, if defined, indicates that this system's + * or defines the symbol LDBL_DIG, which is the number + * of significant digits in a long double precision number. Unlike + * for DBL_DIG, there's no good guess for LDBL_DIG if it is undefined. + */ +#define HAS_LDBL_DIG /* */ + +/* HAS_LONG_DOUBLE: + * This symbol will be defined if the C compiler supports long + * doubles. */ -/* PWPASSWD: - * This symbol, if defined, indicates to the C program that struct passwd - * contains pw_passwd. +/* LONG_DOUBLESIZE: + * This symbol contains the size of a long double, so that the + * C preprocessor can make decisions based on it. It is only + * defined if the system supports long doubles. */ -/*#define I_PWD /**/ -/*#define PWQUOTA /**/ -/*#define PWAGE /**/ -/*#define PWCHANGE /**/ -/*#define PWCLASS /**/ -/*#define PWEXPIRE /**/ -/*#define PWCOMMENT /**/ -/*#define PWGECOS /**/ -/*#define PWPASSWD /**/ +#define HAS_LONG_DOUBLE /**/ +#ifdef HAS_LONG_DOUBLE +#define LONG_DOUBLESIZE 8 /**/ +#endif -/* I_SYSUIO: - * This symbol, if defined, indicates that exists and - * should be included. +/* HAS_LONG_LONG: + * This symbol will be defined if the C compiler supports long long. */ -/*#define I_SYSUIO /**/ +/* LONGLONGSIZE: + * This symbol contains the size of a long long, so that the + * C preprocessor can make decisions based on it. It is only + * defined if the system supports long long. + */ +/*#define HAS_LONG_LONG /**/ +#ifdef HAS_LONG_LONG +#define LONGLONGSIZE _error_ /**/ +#endif -/* Free_t: - * This variable contains the return type of free(). It is usually - * void, but occasionally int. +/* HAS_MADVISE: + * This symbol, if defined, indicates that the madvise system call is + * available to map a file into memory. */ -/* Malloc_t: - * This symbol is the type of pointer returned by malloc and realloc. +/*#define HAS_MADVISE /**/ + +/* HAS_MEMCHR: + * This symbol, if defined, indicates that the memchr routine is available + * to locate characters within a C string. */ -#define Malloc_t void * /**/ -#define Free_t void /**/ +#define HAS_MEMCHR /**/ -/* MYMALLOC: - * This symbol, if defined, indicates that we're using our own malloc. +/* HAS_MKDTEMP: + * This symbol, if defined, indicates that the mkdtemp routine is + * available to exclusively create a uniquely named temporary directory. */ -/*#define MYMALLOC /**/ +/*#define HAS_MKDTEMP /**/ -/* SIG_NAME: - * This symbol contains a list of signal names in order of - * signal number. This is intended - * to be used as a static array initialization, like this: - * char *sig_name[] = { SIG_NAME }; - * The signals in the list are separated with commas, and each signal - * is surrounded by double quotes. There is no leading SIG in the signal - * name, i.e. SIGQUIT is known as "QUIT". - * Gaps in the signal numbers (up to NSIG) are filled in with NUMnn, - * etc., where nn is the actual signal number (e.g. NUM37). - * The signal number for sig_name[i] is stored in sig_num[i]. - * The last element is 0 to terminate the list with a NULL. This - * corresponds to the 0 at the end of the sig_num list. +/* HAS_MKSTEMP: + * This symbol, if defined, indicates that the mkstemp routine is + * available to exclusively create and open a uniquely named + * temporary file. */ -/* SIG_NUM: - * This symbol contains a list of signal numbers, in the same order as the - * SIG_NAME list. It is suitable for static array initialization, as in: - * int sig_num[] = { SIG_NUM }; - * The signals in the list are separated with commas, and the indices - * within that list and the SIG_NAME list match, so it's easy to compute - * the signal name from a number or vice versa at the price of a small - * dynamic linear lookup. - * Duplicates are allowed, but are moved to the end of the list. - * The signal number corresponding to sig_name[i] is sig_number[i]. - * if (i < NSIG) then sig_number[i] == i. - * The last element is 0, corresponding to the 0 at the end of - * the sig_name list. +/*#define HAS_MKSTEMP /**/ + +/* HAS_MKSTEMPS: + * This symbol, if defined, indicates that the mkstemps routine is + * available to excluslvely create and open a uniquely named + * (with a suffix) temporary file. */ -#define SIG_NAME "ZERO","ABRT","FPE","ILL","INT","SEGV","TERM","USR1","USR2","IO","HUP","URG","ALRM","KILL","PIPE","QUIT","CHLD","CONT","STOP","TSTP","TTIN","TTOU","BUS","RT1","RT2","RT3","RT4","RT5","RT6","RT7","RT8",0 /**/ -#define SIG_NUM 0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,0 /**/ +/*#define HAS_MKSTEMPS /**/ -/* VOIDFLAGS: - * This symbol indicates how much support of the void type is given by this - * compiler. What various bits mean: - * - * 1 = supports declaration of void - * 2 = supports arrays of pointers to functions returning void - * 4 = supports comparisons between pointers to void functions and - * addresses of void functions - * 8 = suports declaration of generic void pointers - * - * The package designer should define VOIDUSED to indicate the requirements - * of the package. This can be done either by #defining VOIDUSED before - * including config.h, or by defining defvoidused in Myinit.U. If the - * latter approach is taken, only those flags will be tested. If the - * level of void support necessary is not present, defines void to int. +/* HAS_MMAP: + * This symbol, if defined, indicates that the mmap system call is + * available to map a file into memory. */ -#ifndef VOIDUSED -#define VOIDUSED 15 -#endif -#define VOIDFLAGS 15 -#if (VOIDFLAGS & VOIDUSED) != VOIDUSED -#define void int /* is void to be avoided? */ -#define M_VOID /* Xenix strikes again */ -#endif +/* Mmap_t: + * This symbol holds the return type of the mmap() system call + * (and simultaneously the type of the first argument). + * Usually set to 'void *' or 'cadd_t'. + */ +/*#define HAS_MMAP /**/ +#define Mmap_t $mmaptype /**/ -/* HAS_ATOLF: - * This symbol, if defined, indicates that the atolf routine is - * available to convert strings into long doubles. +/* HAS_MPROTECT: + * This symbol, if defined, indicates that the mprotect system call is + * available to modify the access protection of a memory mapped file. */ -/*#define HAS_ATOLF /**/ +/*#define HAS_MPROTECT /**/ -/* HAS_ATOLL: - * This symbol, if defined, indicates that the atoll routine is - * available to convert strings into long longs. +/* HAS_MSG: + * This symbol, if defined, indicates that the entire msg*(2) library is + * supported (IPC mechanism based on message queues). */ -/*#define HAS_ATOLL /**/ +/*#define HAS_MSG /**/ -/* PERL_BINCOMPAT_5005: - * This symbol, if defined, indicates that Perl 5.006 should be - * binary-compatible with Perl 5.005. This is impossible for builds - * that use features like threads and multiplicity it is always $undef - * for those versions. +/* HAS_OFF64_T: + * This symbol will be defined if the C compiler supports off64_t. */ -/*#define PERL_BINCOMPAT_5005 /**/ +/*#define HAS_OFF64_T /**/ -/* DLSYM_NEEDS_UNDERSCORE: - * This symbol, if defined, indicates that we need to prepend an - * underscore to the symbol name before calling dlsym(). This only - * makes sense if you *have* dlsym, which we will presume is the - * case if you're using dl_dlopen.xs. +/* HAS_OPEN3: + * This manifest constant lets the C program know that the three + * argument form of open(2) is available. */ -/*#define DLSYM_NEEDS_UNDERSCORE /**/ +#define HAS_OPEN3 /**/ -/* HAS_ENDSPENT: - * This symbol, if defined, indicates that the endspent system call is - * available to finalize the scan of SysV shadow password entries. +/* OLD_PTHREAD_CREATE_JOINABLE: + * This symbol, if defined, indicates how to create pthread + * in joinable (aka undetached) state. NOTE: not defined + * if pthread.h already has defined PTHREAD_CREATE_JOINABLE + * (the new version of the constant). + * If defined, known values are PTHREAD_CREATE_UNDETACHED + * and __UNDETACHED. */ -/*#define HAS_ENDSPENT /**/ +/*#define OLD_PTHREAD_CREATE_JOINABLE /**/ -/* HAS_STRUCT_FS_DATA: - * This symbol, if defined, indicates that the struct fs_data - * to do statfs() is supported. +/* HAS_PTHREAD_YIELD: + * This symbol, if defined, indicates that the pthread_yield + * routine is available to yield the execution of the current + * thread. sched_yield is preferable to pthread_yield. */ -/*#define HAS_STRUCT_FS_DATA /**/ +/* SCHED_YIELD: + * This symbol defines the way to yield the execution of + * the current thread. Known ways are sched_yield, + * pthread_yield, and pthread_yield with NULL. + */ +/* HAS_SCHED_YIELD: + * This symbol, if defined, indicates that the sched_yield + * routine is available to yield the execution of the current + * thread. sched_yield is preferable to pthread_yield. + */ +/*#define HAS_PTHREAD_YIELD /**/ +#define SCHED_YIELD /**/ +/*#define HAS_SCHED_YIELD /**/ -/* HAS_FSEEKO: - * This symbol, if defined, indicates that the fseeko routine is - * available to fseek beyond 32 bits (useful for ILP32 hosts). +/* HAS_SAFE_BCOPY: + * This symbol, if defined, indicates that the bcopy routine is available + * to copy potentially overlapping memory blocks. Otherwise you should + * probably use memmove() or memcpy(). If neither is defined, roll your + * own version. */ -/*#define HAS_FSEEKO /**/ +/*#define HAS_SAFE_BCOPY /**/ -/* HAS_FSTATFS: - * This symbol, if defined, indicates that the fstatfs routine is - * available to stat filesystems by file descriptors. +/* HAS_SAFE_MEMCPY: + * This symbol, if defined, indicates that the memcpy routine is available + * to copy potentially overlapping memory blocks. Otherwise you should + * probably use memmove() or memcpy(). If neither is defined, roll your + * own version. */ -/*#define HAS_FSTATFS /**/ -/* HAS_FTELLO: - * This symbol, if defined, indicates that the ftello routine is - * available to ftell beyond 32 bits (useful for ILP32 hosts). +/*#define HAS_SAFE_MEMCPY /**/ + +/* HAS_SANE_MEMCMP: + * This symbol, if defined, indicates that the memcmp routine is available + * and can be used to compare relative magnitudes of chars with their high + * bits set. If it is not defined, roll your own version. */ -/*#define HAS_FTELLO /**/ +#define HAS_SANE_MEMCMP /**/ -/* HAS_GETMNT: - * This symbol, if defined, indicates that the getmnt routine is - * available to get filesystem mount info by filename. +/* HAS_SEM: + * This symbol, if defined, indicates that the entire sem*(2) library is + * supported. */ -/*#define HAS_GETMNT /**/ +/*#define HAS_SEM /**/ -/* HAS_GETMNTENT: - * This symbol, if defined, indicates that the getmntent routine is - * available to iterate through mounted file systems to get their info. +/* HAS_SETGRENT: + * This symbol, if defined, indicates that the setgrent routine is + * available for initializing sequential access of the group database. */ -/*#define HAS_GETMNTENT /**/ +/*#define HAS_SETGRENT /**/ -/* HAS_GETSPENT: - * This symbol, if defined, indicates that the getspent system call is - * available to retrieve SysV shadow password entries sequentially. +/* HAS_SETGROUPS: + * This symbol, if defined, indicates that the setgroups() routine is + * available to set the list of process groups. If unavailable, multiple + * groups are probably not supported. */ -/*#define HAS_GETSPENT /**/ +/*#define HAS_SETGROUPS /**/ -/* HAS_GETSPNAM: - * This symbol, if defined, indicates that the getspnam system call is - * available to retrieve SysV shadow password entries by name. +/* HAS_SETHOSTENT: + * This symbol, if defined, indicates that the sethostent() routine is + * available. */ -/*#define HAS_GETSPNAM /**/ +#define HAS_SETHOSTENT /**/ -/* HAS_HASMNTOPT: - * This symbol, if defined, indicates that the hasmntopt routine is - * available to query the mount options of file systems. +/* HAS_SETNETENT: + * This symbol, if defined, indicates that the setnetent() routine is + * available. */ -/*#define HAS_HASMNTOPT /**/ +#define HAS_SETNETENT /**/ -/* HAS_INT64_T: - * This symbol will defined if the C compiler supports int64_t. - * Usually the needs to be included, but sometimes - * is enough. +/* HAS_SETPROTOENT: + * This symbol, if defined, indicates that the setprotoent() routine is + * available. */ -/*#define HAS_INT64_T /**/ +#define HAS_SETPROTOENT /**/ -/* HAS_LDBL_DIG: - * This symbol, if defined, indicates that this system's - * or defines the symbol LDBL_DIG, which is the number - * of significant digits in a long double precision number. Unlike - * for DBL_DIG, there's no good guess for LDBL_DIG if it is undefined. +/* HAS_SETPWENT: + * This symbol, if defined, indicates that the setpwent routine is + * available for initializing sequential access of the passwd database. + */ +/*#define HAS_SETPWENT /**/ + +/* HAS_SETSERVENT: + * This symbol, if defined, indicates that the setservent() routine is + * available. */ -#define HAS_LDBL_DIG /* */ +#define HAS_SETSERVENT /**/ /* HAS_SETSPENT: * This symbol, if defined, indicates that the setspent system call is @@ -2217,18 +1836,123 @@ */ /*#define HAS_SETSPENT /**/ +/* HAS_SETVBUF: + * This symbol, if defined, indicates that the setvbuf routine is + * available to change buffering on an open stdio stream. + * to a line-buffered mode. + */ +#define HAS_SETVBUF /**/ + /* USE_SFIO: * This symbol, if defined, indicates that sfio should * be used. */ /*#define USE_SFIO /**/ +/* HAS_SHM: + * This symbol, if defined, indicates that the entire shm*(2) library is + * supported. + */ +/*#define HAS_SHM /**/ + +/* HAS_SIGACTION: + * This symbol, if defined, indicates that Vr4's sigaction() routine + * is available. + */ +/*#define HAS_SIGACTION /**/ + +/* HAS_SIGSETJMP: + * This variable indicates to the C program that the sigsetjmp() + * routine is available to save the calling process's registers + * and stack environment for later use by siglongjmp(), and + * to optionally save the process's signal mask. See + * Sigjmp_buf, Sigsetjmp, and Siglongjmp. + */ +/* Sigjmp_buf: + * This is the buffer type to be used with Sigsetjmp and Siglongjmp. + */ +/* Sigsetjmp: + * This macro is used in the same way as sigsetjmp(), but will invoke + * traditional setjmp() if sigsetjmp isn't available. + * See HAS_SIGSETJMP. + */ +/* Siglongjmp: + * This macro is used in the same way as siglongjmp(), but will invoke + * traditional longjmp() if siglongjmp isn't available. + * See HAS_SIGSETJMP. + */ +/*#define HAS_SIGSETJMP /**/ +#ifdef HAS_SIGSETJMP +#define Sigjmp_buf sigjmp_buf +#define Sigsetjmp(buf,save_mask) sigsetjmp((buf),(save_mask)) +#define Siglongjmp(buf,retval) siglongjmp((buf),(retval)) +#else +#define Sigjmp_buf jmp_buf +#define Sigsetjmp(buf,save_mask) setjmp((buf)) +#define Siglongjmp(buf,retval) longjmp((buf),(retval)) +#endif + +/* HAS_SOCKET: + * This symbol, if defined, indicates that the BSD socket interface is + * supported. + */ +/* HAS_SOCKETPAIR: + * This symbol, if defined, indicates that the BSD socketpair() call is + * supported. + */ +/* HAS_MSG_CTRUNC: + * This symbol, if defined, indicates that the MSG_CTRUNC is supported. + * Checking just with #ifdef might not be enough because this symbol + * has been known to be an enum. + */ +/* HAS_MSG_DONTROUTE: + * This symbol, if defined, indicates that the MSG_DONTROUTE is supported. + * Checking just with #ifdef might not be enough because this symbol + * has been known to be an enum. + */ +/* HAS_MSG_OOB: + * This symbol, if defined, indicates that the MSG_OOB is supported. + * Checking just with #ifdef might not be enough because this symbol + * has been known to be an enum. + */ +/* HAS_MSG_PEEK: + * This symbol, if defined, indicates that the MSG_PEEK is supported. + * Checking just with #ifdef might not be enough because this symbol + * has been known to be an enum. + */ +/* HAS_MSG_PROXY: + * This symbol, if defined, indicates that the MSG_PROXY is supported. + * Checking just with #ifdef might not be enough because this symbol + * has been known to be an enum. + */ +/* HAS_SCM_RIGHTS: + * This symbol, if defined, indicates that the SCM_RIGHTS is supported. + * Checking just with #ifdef might not be enough because this symbol + * has been known to be an enum. + */ +#define HAS_SOCKET /**/ +/*#define HAS_SOCKETPAIR /**/ +/*#define HAS_MSG_CTRUNC /**/ +/*#define HAS_MSG_DONTROUTE /**/ +/*#define HAS_MSG_OOB /**/ +/*#define HAS_MSG_PEEK /**/ +/*#define HAS_MSG_PROXY /**/ +/*#define HAS_SCM_RIGHTS /**/ + /* HAS_SQRTL: * This symbol, if defined, indicates that the sqrtl routine is * available to do long double square roots. */ /*#define HAS_SQRTL /**/ +/* USE_STAT_BLOCKS: + * This symbol is defined if this system has a stat structure declaring + * st_blksize and st_blocks. + */ +#ifndef USE_STAT_BLOCKS +/*#define USE_STAT_BLOCKS /**/ +#endif + /* HAS_STRUCT_STATFS_F_FLAGS: * This symbol, if defined, indicates that the struct statfs * does have the f_flags member containing the mount flags of @@ -2252,19 +1976,184 @@ */ /*#define HAS_FSTATVFS /**/ +/* USE_STDIO_PTR: + * This symbol is defined if the _ptr and _cnt fields (or similar) + * of the stdio FILE structure can be used to access the stdio buffer + * for a file handle. If this is defined, then the FILE_ptr(fp) + * and FILE_cnt(fp) macros will also be defined and should be used + * to access these fields. + */ +/* FILE_ptr: + * This macro is used to access the _ptr field (or equivalent) of the + * FILE structure pointed to by its argument. This macro will always be + * defined if USE_STDIO_PTR is defined. + */ +/* STDIO_PTR_LVALUE: + * This symbol is defined if the FILE_ptr macro can be used as an + * lvalue. + */ +/* FILE_cnt: + * This macro is used to access the _cnt field (or equivalent) of the + * FILE structure pointed to by its argument. This macro will always be + * defined if USE_STDIO_PTR is defined. + */ +/* STDIO_CNT_LVALUE: + * This symbol is defined if the FILE_cnt macro can be used as an + * lvalue. + */ +#define USE_STDIO_PTR /**/ +#ifdef USE_STDIO_PTR +#define FILE_ptr(fp) ((fp)->_ptr) +#define STDIO_PTR_LVALUE /**/ +#define FILE_cnt(fp) ((fp)->_cnt) +#define STDIO_CNT_LVALUE /**/ +#endif + +/* USE_STDIO_BASE: + * This symbol is defined if the _base field (or similar) of the + * stdio FILE structure can be used to access the stdio buffer for + * a file handle. If this is defined, then the FILE_base(fp) macro + * will also be defined and should be used to access this field. + * Also, the FILE_bufsiz(fp) macro will be defined and should be used + * to determine the number of bytes in the buffer. USE_STDIO_BASE + * will never be defined unless USE_STDIO_PTR is. + */ +/* FILE_base: + * This macro is used to access the _base field (or equivalent) of the + * FILE structure pointed to by its argument. This macro will always be + * defined if USE_STDIO_BASE is defined. + */ +/* FILE_bufsiz: + * This macro is used to determine the number of bytes in the I/O + * buffer pointed to by _base field (or equivalent) of the FILE + * structure pointed to its argument. This macro will always be defined + * if USE_STDIO_BASE is defined. + */ +#define USE_STDIO_BASE /**/ +#ifdef USE_STDIO_BASE +#define FILE_base(fp) ((fp)->_base) +#define FILE_bufsiz(fp) ((fp)->_cnt + (fp)->_ptr - (fp)->_base) +#endif + +/* HAS_STRERROR: + * This symbol, if defined, indicates that the strerror routine is + * available to translate error numbers to strings. See the writeup + * of Strerror() in this file before you try to define your own. + */ +/* HAS_SYS_ERRLIST: + * This symbol, if defined, indicates that the sys_errlist array is + * available to translate error numbers to strings. The extern int + * sys_nerr gives the size of that table. + */ +/* Strerror: + * This preprocessor symbol is defined as a macro if strerror() is + * not available to translate error numbers to strings but sys_errlist[] + * array is there. + */ +#define HAS_STRERROR /**/ +#define HAS_SYS_ERRLIST /**/ +#define Strerror(e) strerror(e) + +/* HAS_STRTOLD: + * This symbol, if defined, indicates that the strtold routine is + * available to convert strings to long doubles. + */ +/*#define HAS_STRTOLD /**/ + +/* HAS_STRTOLL: + * This symbol, if defined, indicates that the strtoll routine is + * available to convert strings to long longs. + */ +/*#define HAS_STRTOLL /**/ + +/* HAS_STRTOULL: + * This symbol, if defined, indicates that the strtoull routine is + * available to convert strings to unsigned long longs. + */ +/*#define HAS_STRTOULL /**/ + +/* HAS_STRTOUQ: + * This symbol, if defined, indicates that the strtouq routine is + * available to convert strings to unsigned long longs (quads). + */ +/*#define HAS_STRTOUQ /**/ + /* HAS_TELLDIR_PROTO: * This symbol, if defined, indicates that the system provides * a prototype for the telldir() function. Otherwise, it is up * to the program to supply one. A good guess is * extern long telldir _((DIR*)); */ -/*#define HAS_TELLDIR_PROTO /**/ +/*#define HAS_TELLDIR_PROTO /**/ + +/* Time_t: + * This symbol holds the type returned by time(). It can be long, + * or time_t on BSD sites (in which case should be + * included). + */ +#define Time_t time_t /* Time type */ + +/* HAS_TIMES: + * This symbol, if defined, indicates that the times() routine exists. + * Note that this became obsolete on some systems (SUNOS), which now + * use getrusage(). It may be necessary to include . + */ +#define HAS_TIMES /**/ + +/* HAS_UNION_SEMUN: + * This symbol, if defined, indicates that the union semun is + * defined by including . If not, the user code + * probably needs to define it as: + * union semun { + * int val; + * struct semid_ds *buf; + * unsigned short *array; + * } + */ +/* USE_SEMCTL_SEMUN: + * This symbol, if defined, indicates that union semun is + * used for semctl IPC_STAT. + */ +/* USE_SEMCTL_SEMID_DS: + * This symbol, if defined, indicates that struct semid_ds * is + * used for semctl IPC_STAT. + */ +/*#define HAS_UNION_SEMUN /**/ +/*#define USE_SEMCTL_SEMUN /**/ +/*#define USE_SEMCTL_SEMID_DS /**/ + +/* HAS_USTAT: + * This symbol, if defined, indicates that the ustat system call is + * available to query file system statistics by dev_t. + */ +/*#define HAS_USTAT /**/ + +/* HAS_VFORK: + * This symbol, if defined, indicates that vfork() exists. + */ +/*#define HAS_VFORK /**/ + +/* Signal_t: + * This symbol's value is either "void" or "int", corresponding to the + * appropriate return type of a signal handler. Thus, you can declare + * a signal handler using "Signal_t (*handler)()", and define the + * handler using "Signal_t handler(sig)". + */ +#define Signal_t void /* Signal handler's return type */ -/* HAS_USTAT: - * This symbol, if defined, indicates that the ustat system call is - * available to query file system statistics by dev_t. +/* HAS_VPRINTF: + * This symbol, if defined, indicates that the vprintf routine is available + * to printf with a pointer to an argument list. If unavailable, you + * may need to write your own, probably in terms of _doprnt(). */ -/*#define HAS_USTAT /**/ +/* USE_CHAR_VSPRINTF: + * This symbol is defined if this system has vsprintf() returning type + * (char*). The trend seems to be to declare it as "int vsprintf()". It + * is up to the package author to declare vsprintf correctly based on the + * symbol. + */ +#define HAS_VPRINTF /**/ +/*#define USE_CHAR_VSPRINTF /**/ /* USE_DYNAMIC_LOADING: * This symbol, if defined, indicates that dynamic loading of @@ -2272,6 +2161,18 @@ */ /*#define USE_DYNAMIC_LOADING /**/ +/* DOUBLESIZE: + * This symbol contains the size of a double, so that the C preprocessor + * can make decisions based on it. + */ +#define DOUBLESIZE 8 /**/ + +/* EBCDIC: + * This symbol, if defined, indicates that this system uses + * EBCDIC encoding. + */ +/*#define EBCDIC /**/ + /* FFLUSH_NULL: * This symbol, if defined, tells that fflush(NULL) does flush * all pending stdio output. @@ -2286,6 +2187,45 @@ #define FFLUSH_NULL /**/ /*#define FFLUSH_ALL /**/ +/* Fpos_t: + * This symbol holds the type used to declare file positions in libc. + * It can be fpos_t, long, uint, etc... It may be necessary to include + * to get any typedef'ed information. + */ +#define Fpos_t fpos_t /* File position type */ + +/* Gid_t_f: + * This symbol defines the format string used for printing a Gid_t. + */ +#define Gid_t_f "d" /**/ + +/* Gid_t_size: + * This symbol holds the size of a Gid_t in bytes. + */ +#define Gid_t_size 4 /* GID size */ + +/* Gid_t: + * This symbol holds the return type of getgid() and the type of + * argument to setrgid() and related functions. Typically, + * it is the type of group ids in the kernel. It can be int, ushort, + * uid_t, etc... It may be necessary to include to get + * any typedef'ed information. + */ +#define Gid_t gid_t /* Type for getgid(), etc... */ + +/* Groups_t: + * This symbol holds the type used for the second argument to + * getgroups() and setgropus(). Usually, this is the same as + * gidtype (gid_t) , but sometimes it isn't. + * It can be int, ushort, uid_t, etc... + * It may be necessary to include to get any + * typedef'ed information. This is only required if you have + * getgroups() or setgropus().. + */ +#if defined(HAS_GETGROUPS) || defined(HAS_SETGROUPS) +#define Groups_t gid_t /* Type for 2nd arg to [sg]etgroups() */ +#endif + /* DB_Prefix_t: * This symbol contains the type of the prefix structure element * in the header file. In older versions of DB, it was @@ -2299,18 +2239,47 @@ #define DB_Hash_t int /**/ #define DB_Prefix_t int /**/ +/* I_GRP: + * This symbol, if defined, indicates to the C program that it should + * include . + */ +/* GRPASSWD: + * This symbol, if defined, indicates to the C program that struct group + * in contains gr_passwd. + */ +/*#define I_GRP /**/ +/*#define GRPASSWD /**/ + +/* I_ICONV: + * This symbol, if defined, indicates that exists and + * should be included. + */ +/*#define I_ICONV /**/ + /* I_INTTYPES: * This symbol, if defined, indicates to the C program that it should * include . */ /*#define I_INTTYPES /**/ +/* I_MACH_CTHREADS: + * This symbol, if defined, indicates to the C program that it should + * include . + */ +/*#define I_MACH_CTHREADS /**/ + /* I_MNTENT: * This symbol, if defined, indicates that exists and * should be included. */ /*#define I_MNTENT /**/ +/* I_NETDB: + * This symbol, if defined, indicates that exists and + * should be included. + */ +#define I_NETDB /**/ + /* I_NETINET_TCP: * This symbol, if defined, indicates to the C program that it should * include . @@ -2323,6 +2292,58 @@ */ /*#define I_POLL /**/ +/* I_PTHREAD: + * This symbol, if defined, indicates to the C program that it should + * include . + */ +/*#define I_PTHREAD /**/ + +/* I_PWD: + * This symbol, if defined, indicates to the C program that it should + * include . + */ +/* PWQUOTA: + * This symbol, if defined, indicates to the C program that struct passwd + * contains pw_quota. + */ +/* PWAGE: + * This symbol, if defined, indicates to the C program that struct passwd + * contains pw_age. + */ +/* PWCHANGE: + * This symbol, if defined, indicates to the C program that struct passwd + * contains pw_change. + */ +/* PWCLASS: + * This symbol, if defined, indicates to the C program that struct passwd + * contains pw_class. + */ +/* PWEXPIRE: + * This symbol, if defined, indicates to the C program that struct passwd + * contains pw_expire. + */ +/* PWCOMMENT: + * This symbol, if defined, indicates to the C program that struct passwd + * contains pw_comment. + */ +/* PWGECOS: + * This symbol, if defined, indicates to the C program that struct passwd + * contains pw_gecos. + */ +/* PWPASSWD: + * This symbol, if defined, indicates to the C program that struct passwd + * contains pw_passwd. + */ +/*#define I_PWD /**/ +/*#define PWQUOTA /**/ +/*#define PWAGE /**/ +/*#define PWCHANGE /**/ +/*#define PWCLASS /**/ +/*#define PWEXPIRE /**/ +/*#define PWCOMMENT /**/ +/*#define PWGECOS /**/ +/*#define PWPASSWD /**/ + /* I_SHADOW: * This symbol, if defined, indicates that exists and * should be included. @@ -2335,6 +2356,24 @@ */ /*#define I_SOCKS /**/ +/* I_SUNMATH: + * This symbol, if defined, indicates that exists and + * should be included. + */ +/*#define I_SUNMATH /**/ + +/* I_SYSLOG: + * This symbol, if defined, indicates that exists and + * should be included. + */ +/*#define I_SYSLOG /**/ + +/* I_SYSMODE: + * This symbol, if defined, indicates that exists and + * should be included. + */ +/*#define I_SYSMODE /**/ + /* I_SYS_MOUNT: * This symbol, if defined, indicates that exists and * should be included. @@ -2352,37 +2391,157 @@ */ /*#define I_SYS_STATVFS /**/ +/* I_SYSUIO: + * This symbol, if defined, indicates that exists and + * should be included. + */ +/*#define I_SYSUIO /**/ + +/* I_SYSUTSNAME: + * This symbol, if defined, indicates that exists and + * should be included. + */ +#define I_SYSUTSNAME /**/ + /* I_SYS_VFS: * This symbol, if defined, indicates that exists and * should be included. */ -/*#define I_SYS_VFS /**/ - -/* I_USTAT: - * This symbol, if defined, indicates that exists and - * should be included. +/*#define I_SYS_VFS /**/ + +/* I_TIME: + * This symbol, if defined, indicates to the C program that it should + * include . + */ +/* I_SYS_TIME: + * This symbol, if defined, indicates to the C program that it should + * include . + */ +/* I_SYS_TIME_KERNEL: + * This symbol, if defined, indicates to the C program that it should + * include with KERNEL defined. + */ +/*#define I_TIME /**/ +#define I_SYS_TIME /**/ +/*#define I_SYS_TIME_KERNEL /**/ + +/* I_USTAT: + * This symbol, if defined, indicates that exists and + * should be included. + */ +/*#define I_USTAT /**/ + +/* PERL_INC_VERSION_LIST: + * This variable specifies the list of subdirectories in over + * which perl.c:incpush() and lib/lib.pm will automatically + * search when adding directories to @INC, in a format suitable + * for a C initialization string. See the inc_version_list entry + * in Porting/Glossary for more details. + */ +#define PERL_INC_VERSION_LIST 0 /**/ + +/* INSTALL_USR_BIN_PERL: + * This symbol, if defined, indicates that Perl is to be installed + * also as /usr/bin/perl. + */ +/*#define INSTALL_USR_BIN_PERL /**/ + +/* PERL_PRIfldbl: + * This symbol, if defined, contains the string used by stdio to + * format long doubles (format 'f') for output. + */ +/* PERL_PRIgldbl: + * This symbol, if defined, contains the string used by stdio to + * format long doubles (format 'g') for output. + */ +#define PERL_PRIfldbl "Lf" /**/ +#define PERL_PRIgldbl "Lg" /**/ + +/* Off_t: + * This symbol holds the type used to declare offsets in the kernel. + * It can be int, long, off_t, etc... It may be necessary to include + * to get any typedef'ed information. + */ +/* LSEEKSIZE: + * This symbol holds the number of bytes used by the Off_t. + */ +/* Off_t_size: + * This symbol holds the number of bytes used by the Off_t. + */ +#define Off_t off_t /* type */ +#define LSEEKSIZE 4 /* size */ +#define Off_t_size 4 /* size */ + +/* Free_t: + * This variable contains the return type of free(). It is usually + * void, but occasionally int. + */ +/* Malloc_t: + * This symbol is the type of pointer returned by malloc and realloc. + */ +#define Malloc_t void * /**/ +#define Free_t void /**/ + +/* MYMALLOC: + * This symbol, if defined, indicates that we're using our own malloc. + */ +/*#define MYMALLOC /**/ + +/* Mode_t: + * This symbol holds the type used to declare file modes + * for systems calls. It is usually mode_t, but may be + * int or unsigned short. It may be necessary to include + * to get any typedef'ed information. + */ +#define Mode_t mode_t /* file mode parameter for system calls */ + +/* VAL_O_NONBLOCK: + * This symbol is to be used during open() or fcntl(F_SETFL) to turn on + * non-blocking I/O for the file descriptor. Note that there is no way + * back, i.e. you cannot turn it blocking again this way. If you wish to + * alternatively switch between blocking and non-blocking, use the + * ioctl(FIOSNBIO) call instead, but that is not supported by all devices. + */ +/* VAL_EAGAIN: + * This symbol holds the errno error code set by read() when no data was + * present on the non-blocking file descriptor. + */ +/* RD_NODATA: + * This symbol holds the return code from read() when no data is present + * on the non-blocking file descriptor. Be careful! If EOF_NONBLOCK is + * not defined, then you can't distinguish between no data and EOF by + * issuing a read(). You'll have to find another way to tell for sure! */ -/*#define I_USTAT /**/ +/* EOF_NONBLOCK: + * This symbol, if defined, indicates to the C program that a read() on + * a non-blocking file descriptor will return 0 on EOF, and not the value + * held in RD_NODATA (-1 usually, in that case!). + */ +#define VAL_O_NONBLOCK O_NONBLOCK +#define VAL_EAGAIN EAGAIN +#define RD_NODATA -1 +#define EOF_NONBLOCK -/* HAS_OFF64_T: - * This symbol will be defined if the C compiler supports off64_t. +/* Netdb_host_t: + * This symbol holds the type used for the 1st argument + * to gethostbyaddr(). */ -/* HAS_FPOS64_T: - * This symbol will be defined if the C compiler supports fpos64_t. +/* Netdb_hlen_t: + * This symbol holds the type used for the 2nd argument + * to gethostbyaddr(). */ -/*#define HAS_OFF64_T /**/ -/*#define HAS_FPOS64_T /**/ - -/* PERL_PRIfldbl: - * This symbol, if defined, contains the string used by stdio to - * format long doubles (format 'f') for output. +/* Netdb_name_t: + * This symbol holds the type used for the argument to + * gethostbyname(). */ -/* PERL_PRIgldbl: - * This symbol, if defined, contains the string used by stdio to - * format long doubles (format 'g') for output. +/* Netdb_net_t: + * This symbol holds the type used for the 1st argument to + * getnetbyaddr(). */ -#define PERL_PRIfldbl "Lf" /**/ -#define PERL_PRIgldbl "Lg" /**/ +#define Netdb_host_t char * /**/ +#define Netdb_hlen_t int /**/ +#define Netdb_name_t char * /**/ +#define Netdb_net_t long /**/ /* IVTYPE: * This symbol defines the C type used for Perl's IV. @@ -2447,6 +2606,10 @@ /* U64SIZE: * This symbol contains the sizeof(U64). */ +/* NV_PRESERVES_UV: + * This symbol, if defined, indicates that a variable of type NVTYPE + * can preserve all the bit of a variable of type UVSIZE. + */ #define IVTYPE int /**/ #define UVTYPE unsigned int /**/ #define I8TYPE char /**/ @@ -2472,6 +2635,7 @@ #define I64SIZE _error_ /**/ #define U64SIZE _error_ /**/ #endif +#define NV_PRESERVES_UV /* IVdf: * This symbol defines the format string used for printing a Perl IV @@ -2494,6 +2658,59 @@ #define UVof "o" /**/ #define UVxf "x" /**/ +/* Pid_t: + * This symbol holds the type used to declare process ids in the kernel. + * It can be int, uint, pid_t, etc... It may be necessary to include + * to get any typedef'ed information. + */ +#define Pid_t pid_t /* PID type */ + +/* PRIVLIB: + * This symbol contains the name of the private library for this package. + * The library is private in the sense that it needn't be in anyone's + * execution path, but it should be accessible by the world. The program + * should be prepared to do ~ expansion. + */ +/* PRIVLIB_EXP: + * This symbol contains the ~name expanded version of PRIVLIB, to be used + * in programs that are not prepared to deal with ~ expansion at run-time. + */ +#define PRIVLIB "/system/ported/perl/lib/5.005" /**/ +#define PRIVLIB_EXP "/system/ported/perl/lib/5.005" /**/ + +/* PTRSIZE: + * This symbol contains the size of a pointer, so that the C preprocessor + * can make decisions based on it. It will be sizeof(void *) if + * the compiler supports (void *); otherwise it will be + * sizeof(char *). + */ +#define PTRSIZE 4 /**/ + +/* Drand01: + * This macro is to be used to generate uniformly distributed + * random numbers over the range [0., 1.[. You may have to supply + * an 'extern double drand48();' in your program since SunOS 4.1.3 + * doesn't provide you with anything relevant in it's headers. + * See HAS_DRAND48_PROTO. + */ +/* Rand_seed_t: + * This symbol defines the type of the argument of the + * random seed function. + */ +/* seedDrand01: + * This symbol defines the macro to be used in seeding the + * random number generator (see Drand01). + */ +/* RANDBITS: + * This symbol indicates how many bits are produced by the + * function used to generate normalized random numbers. + * Values include 15, 16, 31, and 48. + */ +#define Drand01() rand()/(RAND_MAX+1) /**/ +#define Rand_seed_t unsigned int /**/ +#define seedDrand01(x) srand((Rand_seed_t)x) /**/ +#define RANDBITS 15 /**/ + /* SELECT_MIN_BITS: * This symbol holds the minimum number of bits operated by select. * That is, if you do select(n, ...), how many bits at least will be @@ -2503,6 +2720,110 @@ */ #define SELECT_MIN_BITS 1 /**/ +/* Select_fd_set_t: + * This symbol holds the type used for the 2nd, 3rd, and 4th + * arguments to select. Usually, this is 'fd_set *', if HAS_FD_SET + * is defined, and 'int *' otherwise. This is only useful if you + * have select(), of course. + */ +#define Select_fd_set_t fd_set * /**/ + +/* SIG_NAME: + * This symbol contains a list of signal names in order of + * signal number. This is intended + * to be used as a static array initialization, like this: + * char *sig_name[] = { SIG_NAME }; + * The signals in the list are separated with commas, and each signal + * is surrounded by double quotes. There is no leading SIG in the signal + * name, i.e. SIGQUIT is known as "QUIT". + * Gaps in the signal numbers (up to NSIG) are filled in with NUMnn, + * etc., where nn is the actual signal number (e.g. NUM37). + * The signal number for sig_name[i] is stored in sig_num[i]. + * The last element is 0 to terminate the list with a NULL. This + * corresponds to the 0 at the end of the sig_num list. + */ +/* SIG_NUM: + * This symbol contains a list of signal numbers, in the same order as the + * SIG_NAME list. It is suitable for static array initialization, as in: + * int sig_num[] = { SIG_NUM }; + * The signals in the list are separated with commas, and the indices + * within that list and the SIG_NAME list match, so it's easy to compute + * the signal name from a number or vice versa at the price of a small + * dynamic linear lookup. + * Duplicates are allowed, but are moved to the end of the list. + * The signal number corresponding to sig_name[i] is sig_number[i]. + * if (i < NSIG) then sig_number[i] == i. + * The last element is 0, corresponding to the 0 at the end of + * the sig_name list. + */ +#define SIG_NAME "ZERO","ABRT","FPE","ILL","INT","SEGV","TERM","USR1","USR2","IO","HUP","URG","ALRM","KILL","PIPE","QUIT","CHLD","CONT","STOP","TSTP","TTIN","TTOU","BUS","RT1","RT2","RT3","RT4","RT5","RT6","RT7","RT8",0 /**/ +#define SIG_NUM 0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,0 /**/ + +/* SITEARCH: + * This symbol contains the name of the private library for this package. + * The library is private in the sense that it needn't be in anyone's + * execution path, but it should be accessible by the world. The program + * should be prepared to do ~ expansion. + * The standard distribution will put nothing in this directory. + * After perl has been installed, users may install their own local + * architecture-dependent modules in this directory with + * MakeMaker Makefile.PL + * or equivalent. See INSTALL for details. + */ +/* SITEARCH_EXP: + * This symbol contains the ~name expanded version of SITEARCH, to be used + * in programs that are not prepared to deal with ~ expansion at run-time. + */ +/*#define SITEARCH "" /**/ +/*#define SITEARCH_EXP "" /**/ + +/* SITELIB: + * This symbol contains the name of the private library for this package. + * The library is private in the sense that it needn't be in anyone's + * execution path, but it should be accessible by the world. The program + * should be prepared to do ~ expansion. + * The standard distribution will put nothing in this directory. + * After perl has been installed, users may install their own local + * architecture-independent modules in this directory with + * MakeMaker Makefile.PL + * or equivalent. See INSTALL for details. + */ +/* SITELIB_EXP: + * This symbol contains the ~name expanded version of SITELIB, to be used + * in programs that are not prepared to deal with ~ expansion at run-time. + */ +/* SITELIB_STEM: + * This define is SITELIB_EXP with any trailing version-specific component + * removed. The elements in inc_version_list (inc_version_list.U) can + * be tacked onto this variable to generate a list of directories to search. + */ +#define SITELIB "/system/ported/perl/lib/site/5.005" /**/ +#define SITELIB_EXP "/system/ported/perl/lib/site/5.005" /**/ +#define SITELIB_STEM "/system/ported/perl/lib/site" /**/ + +/* Size_t_size: + * This symbol holds the size of a Size_t in bytes. + */ +#define Size_t_size 4 /* */ + +/* Size_t: + * This symbol holds the type used to declare length parameters + * for string functions. It is usually size_t, but may be + * unsigned long, int, etc. It may be necessary to include + * to get any typedef'ed information. + */ +#define Size_t size_t /* length paramater for string functions */ + +/* SSize_t: + * This symbol holds the type used by functions that return + * a count of bytes or an error condition. It must be a signed type. + * It is usually ssize_t, but may be long or int, etc. + * It may be necessary to include or + * to get any typedef'ed information. + * We will pick a type such that sizeof(SSize_t) == sizeof(Size_t). + */ +#define SSize_t ssize_t /* signed count of bytes */ + /* STARTPERL: * This variable contains the string to put in front of a perl * script to make sure (one hopes) that it runs with perl and not @@ -2521,25 +2842,52 @@ #define HAS_STDIO_STREAM_ARRAY /**/ #define STDIO_STREAM_ARRAY _iob -/* HAS_STRTOULL: - * This symbol, if defined, indicates that the strtoull routine is - * available to convert strings into unsigned long longs. +/* Uid_t_f: + * This symbol defines the format string used for printing a Uid_t. */ -/*#define HAS_STRTOULL /**/ +#define Uid_t_f "d" /**/ -/* USE_64_BITS: +/* Uid_t_size: + * This symbol holds the size of a Uid_t in bytes. + */ +#define Uid_t_size 4 /* UID size */ + +/* Uid_t: + * This symbol holds the type used to declare user ids in the kernel. + * It can be int, ushort, uid_t, etc... It may be necessary to include + * to get any typedef'ed information. + */ +#define Uid_t uid_t /* UID type */ + +/* USE_64_BIT_INT: * This symbol, if defined, indicates that 64-bit integers should * be used when available. If not defined, the native integers - * will be used (be they 32 or 64 bits). + * will be employed (be they 32 or 64 bits). The minimal possible + * 64-bitness is used, just enough to get 64-bit integers into Perl. + * This may mean using for example "long longs", while your memory + * may still be limited to 2 gigabytes. */ -#ifndef USE_64_BITS -/*#define USE_64_BITS /**/ +/* USE_64_BIT_ALL: + * This symbol, if defined, indicates that 64-bit integers should + * be used when available. If not defined, the native integers + * will be used (be they 32 or 64 bits). The maximal possible + * 64-bitness is employed: LP64 or ILP64, meaning that you will + * be able to use more than 2 gigabytes of memory. This mode is + * even more binary incompatible than USE_64_BIT_INT. You may not + * be able to run the resulting executable in a 32-bit CPU at all or + * you may need at least to reboot your OS to 64-bit mode. + */ +#ifndef USE_64_BIT_INT +/*#define USE_64_BIT_INT /**/ +#endif + +#ifndef USE_64_BIT_ALL +/*#define USE_64_BIT_ALL /**/ #endif /* USE_LARGE_FILES: * This symbol, if defined, indicates that large file support - * should be used when available. The USE_64_BITS symbol will - * also be turned on if necessary. + * should be used when available. */ #ifndef USE_LARGE_FILES /*#define USE_LARGE_FILES /**/ @@ -2553,14 +2901,10 @@ #define USE_LONG_DOUBLE /**/ #endif -/* USE_LONG_LONG: - * This symbol, if defined, indicates that long longs should - * be used when available. +/* USE_MORE_BITS: + * This symbol, if defined, indicates that 64-bit interfaces and + * long doubles should be used when available. */ -#ifndef USE_LONG_LONG -/*#define USE_LONG_LONG /**/ -#endif - #ifndef USE_MORE_BITS /*#define USE_MORE_BITS /**/ #endif @@ -2573,21 +2917,83 @@ /*#define MULTIPLICITY /**/ #endif -/* USE_PERLIO: - * This symbol, if defined, indicates that the PerlIO abstraction should - * be used throughout. If not defined, stdio should be - * used in a fully backward compatible manner. +/* USE_PERLIO: + * This symbol, if defined, indicates that the PerlIO abstraction should + * be used throughout. If not defined, stdio should be + * used in a fully backward compatible manner. + */ +#ifndef USE_PERLIO +/*#define USE_PERLIO /**/ +#endif + +/* USE_SOCKS: + * This symbol, if defined, indicates that Perl should + * be built to use socks. + */ +#ifndef USE_SOCKS +/*#define USE_SOCKS /**/ +#endif + +/* USE_ITHREADS: + * This symbol, if defined, indicates that Perl should be built to + * use the interpreter-based threading implementation. + */ +/* USE_5005THREADS: + * This symbol, if defined, indicates that Perl should be built to + * use the 5.005-based threading implementation. + */ +/* OLD_PTHREADS_API: + * This symbol, if defined, indicates that Perl should + * be built to use the old draft POSIX threads API. + */ +/*#define USE_5005THREADS /**/ +/*#define USE_ITHREADS /**/ +#if defined(USE_5005THREADS) && !defined(USE_ITHREADS) +#define USE_THREADS /* until src is revised*/ +#endif +/*#define OLD_PTHREADS_API /**/ + +/* PERL_VENDORARCH_EXP: + * This symbol contains the ~name expanded version of PERL_VENDORARCH, to be used + * in programs that are not prepared to deal with ~ expansion at run-time. + */ +#define PERL_VENDORARCH_EXP "" /**/ + +/* PERL_VENDORLIB_EXP: + * This symbol contains the ~name expanded version of VENDORLIB, to be used + * in programs that are not prepared to deal with ~ expansion at run-time. */ -#ifndef USE_PERLIO -/*#define USE_PERLIO /**/ -#endif +/* PERL_VENDORLIB_STEM: + * This define is PERL_VENDORLIB_EXP with any trailing version-specific component + * removed. The elements in inc_version_list (inc_version_list.U) can + * be tacked onto this variable to generate a list of directories to search. + */ +#define PERL_VENDORLIB_EXP "" /**/ +#define PERL_VENDORLIB_STEM "" /**/ -/* USE_SOCKS: - * This symbol, if defined, indicates that Perl should - * be built to use socks. +/* VOIDFLAGS: + * This symbol indicates how much support of the void type is given by this + * compiler. What various bits mean: + * + * 1 = supports declaration of void + * 2 = supports arrays of pointers to functions returning void + * 4 = supports comparisons between pointers to void functions and + * addresses of void functions + * 8 = suports declaration of generic void pointers + * + * The package designer should define VOIDUSED to indicate the requirements + * of the package. This can be done either by #defining VOIDUSED before + * including config.h, or by defining defvoidused in Myinit.U. If the + * latter approach is taken, only those flags will be tested. If the + * level of void support necessary is not present, defines void to int. */ -#ifndef USE_SOCKS -/*#define USE_SOCKS /**/ +#ifndef VOIDUSED +#define VOIDUSED 15 +#endif +#define VOIDFLAGS 15 +#if (VOIDFLAGS & VOIDUSED) != VOIDUSED +#define void int /* is void to be avoided? */ +#define M_VOID /* Xenix strikes again */ #endif /* PERL_XS_APIVERSION: @@ -2622,233 +3028,33 @@ * (presumably) be similar. * See the INSTALL file for how this works. */ -#define PERL_XS_APIVERSION 5.00563 /* Change to string for tuples?*/ -#define PERL_PM_APIVERSION 5.00563 /* Change to string for tuples?*/ - -/* HAS_DRAND48_PROTO: - * This symbol, if defined, indicates that the system provides - * a prototype for the drand48() function. Otherwise, it is up - * to the program to supply one. A good guess is - * extern double drand48 _((void)); - */ -/*#define HAS_DRAND48_PROTO /**/ - -/* HAS_GETHOST_PROTOS: - * This symbol, if defined, indicates that includes - * prototypes for gethostent(), gethostbyname(), and - * gethostbyaddr(). Otherwise, it is up to the program to guess - * them. See netdbtype.U for probing for various Netdb_xxx_t types. - */ -#define HAS_GETHOST_PROTOS /**/ - -/* HAS_GETNET_PROTOS: - * This symbol, if defined, indicates that includes - * prototypes for getnetent(), getnetbyname(), and - * getnetbyaddr(). Otherwise, it is up to the program to guess - * them. See netdbtype.U for probing for various Netdb_xxx_t types. - */ -#define HAS_GETNET_PROTOS /**/ - -/* HAS_GETPROTO_PROTOS: - * This symbol, if defined, indicates that includes - * prototypes for getprotoent(), getprotobyname(), and - * getprotobyaddr(). Otherwise, it is up to the program to guess - * them. See netdbtype.U for probing for various Netdb_xxx_t types. - */ -#define HAS_GETPROTO_PROTOS /**/ - -/* HAS_GETSERV_PROTOS: - * This symbol, if defined, indicates that includes - * prototypes for getservent(), getservbyname(), and - * getservbyaddr(). Otherwise, it is up to the program to guess - * them. See netdbtype.U for probing for various Netdb_xxx_t types. - */ -#define HAS_GETSERV_PROTOS /**/ - -/* Netdb_host_t: - * This symbol holds the type used for the 1st argument - * to gethostbyaddr(). - */ -/* Netdb_hlen_t: - * This symbol holds the type used for the 2nd argument - * to gethostbyaddr(). - */ -/* Netdb_name_t: - * This symbol holds the type used for the argument to - * gethostbyname(). - */ -/* Netdb_net_t: - * This symbol holds the type used for the 1st argument to - * getnetbyaddr(). - */ -#define Netdb_host_t char * /**/ -#define Netdb_hlen_t int /**/ -#define Netdb_name_t char * /**/ -#define Netdb_net_t long /**/ - -/* Select_fd_set_t: - * This symbol holds the type used for the 2nd, 3rd, and 4th - * arguments to select. Usually, this is 'fd_set *', if HAS_FD_SET - * is defined, and 'int *' otherwise. This is only useful if you - * have select(), of course. - */ -#define Select_fd_set_t fd_set * /**/ - -/* ARCHNAME: - * This symbol holds a string representing the architecture name. - * It may be used to construct an architecture-dependant pathname - * where library files may be held under a private library, for - * instance. - */ -#define ARCHNAME "vos" /**/ - -/* OLD_PTHREAD_CREATE_JOINABLE: - * This symbol, if defined, indicates how to create pthread - * in joinable (aka undetached) state. NOTE: not defined - * if pthread.h already has defined PTHREAD_CREATE_JOINABLE - * (the new version of the constant). - * If defined, known values are PTHREAD_CREATE_UNDETACHED - * and __UNDETACHED. - */ -/*#define OLD_PTHREAD_CREATE_JOINABLE /**/ - -/* HAS_PTHREAD_YIELD: - * This symbol, if defined, indicates that the pthread_yield - * routine is available to yield the execution of the current - * thread. sched_yield is preferable to pthread_yield. - */ -/* SCHED_YIELD: - * This symbol defines the way to yield the execution of - * the current thread. Known ways are sched_yield, - * pthread_yield, and pthread_yield with NULL. - */ -/* HAS_SCHED_YIELD: - * This symbol, if defined, indicates that the sched_yield - * routine is available to yield the execution of the current - * thread. sched_yield is preferable to pthread_yield. - */ -/*#define HAS_PTHREAD_YIELD /**/ -#define SCHED_YIELD /**/ -/*#define HAS_SCHED_YIELD /**/ - -/* I_MACH_CTHREADS: - * This symbol, if defined, indicates to the C program that it should - * include . - */ -/*#define I_MACH_CTHREADS /**/ - -/* I_PTHREAD: - * This symbol, if defined, indicates to the C program that it should - * include . - */ -/*#define I_PTHREAD /**/ - -/* USE_THREADS: - * This symbol, if defined, indicates that Perl should - * be built to use threads. - */ -/* OLD_PTHREADS_API: - * This symbol, if defined, indicates that Perl should - * be built to use the old draft POSIX threads API. - */ -#ifndef USE_TTHREADS -/*#define USE_THREADS /**/ -#endif -/*#define OLD_PTHREADS_API /**/ - -/* Time_t: - * This symbol holds the type returned by time(). It can be long, - * or time_t on BSD sites (in which case should be - * included). - */ -#define Time_t time_t /* Time type */ - -/* HAS_TIMES: - * This symbol, if defined, indicates that the times() routine exists. - * Note that this became obsolete on some systems (SUNOS), which now - * use getrusage(). It may be necessary to include . - */ -#define HAS_TIMES /**/ - -/* Fpos_t: - * This symbol holds the type used to declare file positions in libc. - * It can be fpos_t, long, uint, etc... It may be necessary to include - * to get any typedef'ed information. - */ -#define Fpos_t fpos_t /* File position type */ - -/* Gid_t_f: - * This symbol defines the format string used for printing a Gid_t. - */ -#define Gid_t_f "d" /**/ - -/* Gid_t_size: - * This symbol holds the size of a Gid_t in bytes. - */ -#define Gid_t_size 4 /* GID size */ - -/* Gid_t: - * This symbol holds the return type of getgid() and the type of - * argument to setrgid() and related functions. Typically, - * it is the type of group ids in the kernel. It can be int, ushort, - * uid_t, etc... It may be necessary to include to get - * any typedef'ed information. - */ -#define Gid_t gid_t /* Type for getgid(), etc... */ - -/* Off_t: - * This symbol holds the type used to declare offsets in the kernel. - * It can be int, long, off_t, etc... It may be necessary to include - * to get any typedef'ed information. - */ -/* LSEEKSIZE: - * This symbol holds the number of bytes used by the Off_t. - */ -/* Off_t_size: - * This symbol holds the number of bytes used by the Off_t. - */ -#define Off_t off_t /* type */ -#define LSEEKSIZE 4 /* size */ -#define Off_t_size 4 /* size */ - -/* Mode_t: - * This symbol holds the type used to declare file modes - * for systems calls. It is usually mode_t, but may be - * int or unsigned short. It may be necessary to include - * to get any typedef'ed information. - */ -#define Mode_t mode_t /* file mode parameter for system calls */ - -/* Pid_t: - * This symbol holds the type used to declare process ids in the kernel. - * It can be int, uint, pid_t, etc... It may be necessary to include - * to get any typedef'ed information. - */ -#define Pid_t pid_t /* PID type */ +#define PERL_XS_APIVERSION "5.00563" +#define PERL_PM_APIVERSION "5.00563" -/* Size_t: - * This symbol holds the type used to declare length parameters - * for string functions. It is usually size_t, but may be - * unsigned long, int, etc. It may be necessary to include - * to get any typedef'ed information. +/* HAS_GETFSSTAT: + * This symbol, if defined, indicates that the getfsstat routine is + * available to stat filesystems in bulk. */ -#define Size_t size_t /* length paramater for string functions */ +/*#define HAS_GETFSSTAT /**/ -/* Uid_t_f: - * This symbol defines the format string used for printing a Uid_t. +/* I_IEEEFP: + * This symbol, if defined, indicates that exists and + * should be included. */ -#define Uid_t_f "d" /**/ +/*#define I_IEEEFP /**/ -/* Uid_t_size: - * This symbol holds the size of a Uid_t in bytes. +/* HAS_LSEEK_PROTO: + * This symbol, if defined, indicates that the system provides + * a prototype for the lseek() function. Otherwise, it is up + * to the program to supply one. A good guess is + * extern off_t lseek(int, off_t, int); */ -#define Uid_t_size 4 /* UID size */ +#define HAS_LSEEK_PROTO /**/ -/* Uid_t: - * This symbol holds the type used to declare user ids in the kernel. - * It can be int, ushort, uid_t, etc... It may be necessary to include - * to get any typedef'ed information. +/* Sock_size_t: + * This symbol holds the type used for the size argument of + * various socket calls (just the base type, not the pointer-to). */ -#define Uid_t uid_t /* UID type */ +#define Sock_size_t int /**/ #endif