X-Git-Url: http://git.shadowcat.co.uk/gitweb/gitweb.cgi?a=blobdiff_plain;f=vms%2Fdescrip_mms.template;h=c34be75e0a4a189e697e889704b1c40a0cccf73b;hb=22d4bb9ccb8701e68f9243547d7e3a3c55f70908;hp=2bf0114532ae9a330aad7f942bb13cecd5703aee;hpb=4b19af017623bfa3bb72bb164598a517f586e0d3;p=p5sagit%2Fp5-mst-13.2.git

diff --git a/vms/descrip_mms.template b/vms/descrip_mms.template
index 2bf0114..c34be75 100644
--- a/vms/descrip_mms.template
+++ b/vms/descrip_mms.template
@@ -22,6 +22,7 @@
 #### Start of system configuration section. ####
 
 ~DECC~
+~DECCXX~
 ~GNUC~
 ~ARCH-TYPE~ = 1
 ~THREAD~
@@ -131,7 +132,11 @@ DBGSPECFLAGS = /Show=All
 	@ If F$TrnLnm("Sys").eqs."" .and. F$TrnLnm("DECC$System_Include").eqs."" Then Define/NoLog SYS DECC$Library_Include
 .endif
 
+.ifdef DECCXX
+XTRACCFLAGS = /Include=[]/Standard=ANSI/Prefix=All/Obj=$(OBJVAL)
+.else
 XTRACCFLAGS = /Include=[]/Standard=Relaxed_ANSI/Prefix=All/Obj=$(OBJVAL)
+.endif
 XTRADEF =
 POSIX = POSIX
 .endif
@@ -218,6 +223,7 @@ NOOP = continue
 # are built using these macros should depend on $(MINIPERL_EXE)
 MINIPERL_EXE = Sys$Disk:[]miniperl$(E)
 MINIPERL = MCR $(MINIPERL_EXE) "-I[.lib]"
+MINIPERLQ = MCR $(MINIPERL_EXE) ""-I[.lib]""
 XSUBPP = $(MINIPERL) "-I[.ext.re]" [.lib.extutils]xsubpp -noprototypes
 # Macro to invoke a preexisting copy of Perl.  This is used to regenerate
 # some header files when rebuilding Perl, but premade versions are provided
@@ -299,7 +305,11 @@ ac8 = $(ARCHCORE)perlapi.h $(ARCHCORE)perlio.h $(ARCHCORE)perlsdio.h
 ac9 = $(ARCHCORE)perlvars.h $(ARCHCORE)perly.h $(ARCHCORE)pp.h
 ac10 = $(ARCHCORE)pp_proto.h $(ARCHCORE)proto.h $(ARCHCORE)regcomp.h
 ac11 = $(ARCHCORE)regexp.h $(ARCHCORE)regnodes.h $(ARCHCORE)scope.h
+.ifdef SOCKARCH
 ac12 = $(ARCHCORE)sv.h $(ARCHCORE)thrdvar.h $(SOCKARCH)
+.else
+ac12 = $(ARCHCORE)sv.h $(ARCHCORE)thrdvar.h
+.endif 
 ac13 = $(ARCHCORE)thread.h $(ARCHCORE)utf8.h $(ARCHCORE)util.h
 ac14 = $(ARCHCORE)vmsish.h $(ARCHCORE)warnings.h $(ARCHCORE)xsub.h
 acopt = $(ARCHCORE)perlshr_attr.opt $(ARCHCORE)$(DBG)perlshr_bld.opt
@@ -327,17 +337,19 @@ CRTLOPTS =,$(CRTL)/Options
 .endif
 
 # Modules which must be installed before we can build extensions
-LIBPREREQ = $(ARCHDIR)Config.pm [.lib]DynaLoader.pm [.lib]XSLoader.pm [.lib]lib.pm [.lib]vmsish.pm [.lib.VMS]Filespec.pm [.lib.ExtUtils]XSSymSet.pm
+LIBPREREQ = $(ARCHDIR)Config.pm [.lib.VMS]Filespec.pm [.lib]DynaLoader.pm [.lib]XSLoader.pm [.lib]lib.pm [.lib]vmsish.pm [.lib.ExtUtils]XSSymSet.pm $(ARCHDIR)vmspipe.com [.lib]re.pm
 
 utils1 = [.lib.pod]perldoc.com [.lib.ExtUtils]Miniperl.pm [.utils]c2ph.com [.utils]h2ph.com [.utils]h2xs.com [.lib]perlbug.com [.lib]perlcc.com [.utils]dprofpp.com
 utils2 = [.lib]splain.com [.utils]pl2pm.com
 
 .ifdef NOX2P
 all : base extras archcorefiles preplibrary perlpods
-	@ $(NOOP)
+	@ write sys$output " "
+	@ write sys$output " Everything is up to date. '$(MMS)$(MMSQUALIFIERS) test' to run test suite."
 .else
 all : base extras x2p archcorefiles preplibrary perlpods
-	@ $(NOOP)
+	@ write sys$output " "
+	@ write sys$output " Everything is up to date. '$(MMS)$(MMSQUALIFIERS) test' to run test suite."
 .endif
 base : miniperl perl
 	@ $(NOOP)
@@ -382,7 +394,13 @@ perlpods : $(pod)
 archcorefiles : $(ac) $(acth) $(ARCHAUTO)time.stamp
 	@ $(NOOP)
 
-miniperl : $(DBG)miniperl$(E)
+[.lib]re.pm  : [.ext.re]re.pm
+	copy/log $(MMS$SOURCE) $(MMS$TARGET)
+
+vmspipe.com : [.vms]vmspipe.com
+	copy/log $(MMS$SOURCE) $(MMS$TARGET)
+
+miniperl : $(DBG)miniperl$(E)  vmspipe.com
 	@ Continue
 $(MINIPERL_EXE) :  miniperlmain$(O), $(DBG)libperl$(OLB) $(CRTL)
 	Link $(LINKFLAGS)/NoDebug/Trace/NoMap/NoFull/NoCross/Exe=$(MMS$TARGET) miniperlmain$(O), $(DBG)libperl$(OLB)/Library/Include=globals $(CRTLOPTS)
@@ -449,6 +467,9 @@ $(ARCHDIR)config.pm : [.lib]config.pm
 [.lib]config.pm : config.h $(MINIPERL_EXE)
 	$(MINIPERL) ConfigPM.
 
+$(ARCHDIR)vmspipe.com : vmspipe.com
+        Copy $(MMS$SOURCE) $(MMS$TARGET)
+
 [.ext.dynaloader]dl_vms.c : [.ext.dynaloader]dl_vms.xs $(ARCHDIR)Config.pm [.lib.ExtUtils]XSSymSet.pm $(MINIPERL_EXE)
 	$(XSUBPP) $(MMS$SOURCE) >$(MMS$TARGET)
 
@@ -474,7 +495,7 @@ $(ARCHDIR)config.pm : [.lib]config.pm
 	@ Rename/Log xsloader.pm [.ext.dynaloader]
 
 dynext : $(LIBPREREQ) $(DBG)perlshr$(E)
-	@build_ext "$(dynamic_ext)" "$(MINIPERL_EXE)" "$(MMS)"
+	@make_ext "$(dynamic_ext)" "$(MINIPERL_EXE)" "$(MMS)"
 
 [.lib]vmsish.pm : [.vms.ext]vmsish.pm
 	Copy/Log/NoConfirm $(MMS$SOURCE) $(MMS$TARGET)
@@ -879,8 +900,12 @@ perly$(O) : perly.c, perly.h, $(h)
 [.t.lib]vmsish.t : [.vms.ext]vmsish.t
 	Copy/Log/NoConfirm $(MMS$SOURCE) $(MMS$TARGET)
 
+check : test
+	@ Continue
+
 test : all [.t.lib]vmsfspec.t [.t.lib]vmsish.t
 	- @[.VMS]Test.Com "$(E)" "$(__DEBUG__)"
+	@ $(MINIPERL) -e "print ""Ran tests"";" > [.t]rantests.
 
 # install ought not need a source, but it doesn't work if one's not
 # there. Go figure...
@@ -1162,6 +1187,25 @@ $(CRTL) : $(MAKEFILE)
 	@ @[.vms]genopt "$(CRTL)/Write" "|" "$(LIBS1)|$(FULLLIBS2)|$(SOCKLIB)"
 
 
+ok : $(utils)
+	$(MINIPERL) lib/perlbug.com -ok -s "(UNINSTALLED)"
+
+okfile : $(utils)
+	$(MINIPERL) lib/perlbug.com -ok -s "(UNINSTALLED)" "-F" perl.ok
+
+nok : $(utils)
+	@ write sys$output " "
+	@ write sys$output " Please type the command:"
+	@ write sys$output " "
+	@ write sys$output "$(MINIPERLQ) lib/perlbug.com -nok -s ""(UNINSTALLED)"""
+
+nokfile : $(utils)
+	@ write sys$output " "
+	@ write sys$output " Please type the command:"
+	@ write sys$output " "
+	@ write sys$output "$(MINIPERLQ) lib/perlbug.com -nok -s ""(UNINSTALLED)"" ""-F"" perl.nok"
+
+
 cleanlis :
 	- If F$Search("*.Lis").nes."" Then Delete/NoConfirm/Log *.Lis;*
 	- If F$Search("*.CPP").nes."" Then Delete/NoConfirm/Log *.CPP;*
@@ -1204,7 +1248,7 @@ tidy : cleanlis
 	- If F$Search("[.lib.pod]*.com;-1").nes."" Then Purge/NoConfirm/Log [.lib.pod]*.com
 
 clean : tidy
-	- @build_ext "$(dynamic_ext)" "$(MINIPERL_EXE)" "$(MMS)" clean
+	- @make_ext "$(dynamic_ext)" "$(MINIPERL_EXE)" "$(MMS)" clean
 	- If F$Search("*.Opt").nes."" Then Delete/NoConfirm/Log *.Opt;*/Exclude=PerlShr_*.Opt
 	- If F$Search("[...]*$(O);*") .nes."" Then Delete/NoConfirm/Log [...]*$(O);*
 	- If F$Search(F$Parse("Sys$Disk:[]","$(SOCKH)")).nes."" Then Delete/NoConfirm/Log $(SOCKH);*
@@ -1229,14 +1273,14 @@ clean : tidy
 	- If F$Search("[.pod]*.com").nes."" Then Delete/NoConfirm/Log [.pod]*.com;*
 
 realclean : clean
-	- @build_ext "$(dynamic_ext)" "$(MINIPERL_EXE)" "$(MMS)" realclean
+	- @make_ext "$(dynamic_ext)" "$(MINIPERL_EXE)" "$(MMS)" realclean
 	- If F$Search("*$(OLB)").nes."" Then Delete/NoConfirm/Log *$(OLB);*
 	- If F$Search("*.Opt").nes."" Then Delete/NoConfirm/Log *.Opt;*
 	- If F$Search("Config.H").nes."" Then Delete/NoConfirm/Log Config.H;*
 	- If F$Search("Config.SH").nes."" Then Delete/NoConfirm/Log Config.SH;*
 	- $(MINIPERL) -e "use File::Path; rmtree(\@ARGV,1,0);" config
 	- If F$Search("Descrip.MMS").nes."" Then Delete/NoConfirm/Log Descrip.MMS;*
-	- If F$Search("Build_Ext.Com").nes."" Then Delete/NoConfirm/Log Build_Ext.Com;*
+	- If F$Search("make_ext.Com").nes."" Then Delete/NoConfirm/Log make_ext.Com;*
 	- $(MINIPERL) -e "use File::Path; rmtree(['lib/auto','lib/VMS','lib/$(ARCH)'],1,0);"
 	- If F$Search("*.TS").nes."" Then Delete/NoConfirm/Log *.TS;*
 	- If F$Search("[.Lib]DynaLoader.pm").nes."" Then Delete/NoConfirm/Log [.Lib]DynaLoader.pm;*
@@ -1256,6 +1300,7 @@ realclean : clean
 	- If F$Search("[.t.lib]vms*.t").nes."" Then Delete/NoConfirm/Log [.t.lib]vms*.t;*
 	- If F$Search("[...]*$(E)").nes."" Then Delete/NoConfirm/Log [...]*$(E);*
 	- If F$Search("[.vms]Perl_Setup.Com").nes."" Then Delete/NoConfirm/Log [.vms]Perl_Setup.Com;*
+	- If F$Search("[.t]rantests.").nes."" Then Delete/NoConfirm/Log [.t]rantests.;*
 
 cleansrc : clean
 !GROK!THIS!