X-Git-Url: http://git.shadowcat.co.uk/gitweb/gitweb.cgi?a=blobdiff_plain;f=pod%2Fperltodo.pod;h=a857e77fcc33b8a1d550c3fa2917d8ec640688e9;hb=c1effa61278e47c916466883d74905b04fedc388;hp=40159610d390723f61b3caf2572cbb11238596c6;hpb=9e6fc21fcd859351f86785f40b58d1227720bc0b;p=p5sagit%2Fp5-mst-13.2.git

diff --git a/pod/perltodo.pod b/pod/perltodo.pod
index 4015961..a857e77 100644
--- a/pod/perltodo.pod
+++ b/pod/perltodo.pod
@@ -4,11 +4,14 @@ perltodo - Perl TO-DO List
 
 =head1 DESCRIPTION
 
-This is a list of wishes for Perl. The tasks we think are smaller or
-easier are listed first. Anyone is welcome to work on any of these,
-but it's a good idea to first contact I<perl5-porters@perl.org> to
-avoid duplication of effort, and to learn from any previous attempts.
-By all means contact a pumpking privately first if you prefer.
+This is a list of wishes for Perl. The most up to date version of this file
+is at http://perl5.git.perl.org/perl.git/blob_plain/HEAD:/pod/perltodo.pod
+
+The tasks we think are smaller or easier are listed first. Anyone is welcome
+to work on any of these, but it's a good idea to first contact
+I<perl5-porters@perl.org> to avoid duplication of effort, and to learn from
+any previous attempts. By all means contact a pumpking privately first if you
+prefer.
 
 Whilst patches to make the list shorter are most welcome, ideas to add to
 the list are also encouraged. Check the perl5-porters archives for past
@@ -23,6 +26,24 @@ programming languages offer you 1 line of immortality?
 
 =head1 Tasks that only need Perl knowledge
 
+=head2 Automate perldelta generation
+
+The perldelta file accompanying each release summaries the major changes.
+It's mostly manually generated currently, but some of that could be
+automated with a bit of perl, specifically the generation of
+
+=over
+
+=item Modules and Pragmata
+
+=item New Documentation
+
+=item New Tests
+
+=back
+
+See F<Porting/how_to_write_a_perldelta.pod> for details.
+
 =head2 Remove duplication of test setup.
 
 Schwern notes, that there's duplication of code - lots and lots of tests have
@@ -30,12 +51,6 @@ some variation on the big block of C<$Is_Foo> checks.  We can safely put this
 into a file, change it to build an C<%Is> hash and require it.  Maybe just put
 it into F<test.pl>. Throw in the handy tainting subroutines.
 
-=head2 common test code for timed bail out
-
-Write portable self destruct code for tests to stop them burning CPU in
-infinite loops. This needs to avoid using alarm, as some of the tests are
-testing alarm/sleep or timers.
-
 =head2 POD -E<gt> HTML conversion in the core still sucks
 
 Which is crazy given just how simple POD purports to be, and how simple HTML
@@ -48,43 +63,17 @@ is needed to improve the cross-linking.
 The addition of C<Pod::Simple> and its related modules may make this task
 easier to complete.
 
-=head2 merge checkpods and podchecker
-
-F<pod/checkpods.PL> (and C<make check> in the F<pod/> subdirectory)
-implements a very basic check for pod files, but the errors it discovers
-aren't found by podchecker. Add this check to podchecker, get rid of
-checkpods and have C<make check> use podchecker.
-
-=head2 Parallel testing
-
-(This probably impacts much more than the core: also the Test::Harness
-and TAP::* modules on CPAN.)
-
-The core regression test suite is getting ever more comprehensive, which has
-the side effect that it takes longer to run. This isn't so good. Investigate
-whether it would be feasible to give the harness script the B<option> of
-running sets of tests in parallel. This would be useful for tests in
-F<t/op/*.t> and F<t/uni/*.t> and maybe some sets of tests in F<lib/>.
-
-Questions to answer
-
-=over 4
-
-=item 1
-
-How does screen layout work when you're running more than one test?
-
-=item 2
-
-How does the caller of test specify how many tests to run in parallel?
+=head2 Make ExtUtils::ParseXS use strict;
 
-=item 3
+F<lib/ExtUtils/ParseXS.pm> contains this line
 
-How do setup/teardown tests identify themselves?
+    # use strict;  # One of these days...
 
-=back
+Simply uncomment it, and fix all the resulting issues :-)
 
-Pugs already does parallel testing - can their approach be re-used?
+The more practical approach, to break the task down into manageable chunks, is
+to work your way though the code from bottom to top, or if necessary adding
+extra C<{ ... }> blocks, and turning on strict within them.
 
 =head2 Make Schwern poorer
 
@@ -102,28 +91,6 @@ tests that are currently missing.
 
 A full test suite for the B module would be nice.
 
-=head2 Deparse inlined constants
-
-Code such as this
-
-    use constant PI => 4;
-    warn PI
-
-will currently deparse as
-
-    use constant ('PI', 4);
-    warn 4;
-
-because the tokenizer inlines the value of the constant subroutine C<PI>.
-This allows various compile time optimisations, such as constant folding
-and dead code elimination. Where these haven't happened (such as the example
-above) it ought be possible to make B::Deparse work out the name of the
-original constant, because just enough information survives in the symbol
-table to do this. Specifically, the same scalar is used for the constant in
-the optree as is used for the constant subroutine, so by iterating over all
-symbol tables and generating a mapping of SV address to constant name, it
-would be possible to provide B::Deparse with this functionality.
-
 =head2 A decent benchmark
 
 C<perlbench> seems impervious to any recent changes made to the perl core. It
@@ -148,19 +115,13 @@ do so. Test it with older perl releases, and fix the problems you find.
 To make a minimal perl distribution, it's useful to look at
 F<t/lib/commonsense.t>.
 
-=head2 Bundle dual life modules in ext/
-
-For maintenance (and branch merging) reasons, it would be useful to move
-some architecture-independent dual-life modules from lib/ to ext/, if this
-has no negative impact on the build of perl itself.
-
-However, we need to make sure that they are still installed in
-architecture-independent directories by C<make install>.
+=head2 Move dual-life pod/*.PL into ext
 
-=head2 Improving C<threads::shared>
-
-Investigate whether C<threads::shared> could share aggregates properly with
-only Perl level changes to shared.pm
+Nearly all the dual-life modules have been moved to F<ext>. However, we
+still  need to move F<pod/*.PL> into their respective directories
+in F<ext/>. They're referenced by (at least) C<plextract> in F<Makefile.SH>
+and C<utils> in F<win32/Makefile> and F<win32/makefile.ml>, and listed
+explicitly in F<win32/pod.mak>, F<vms/descrip_mms.template> and F<utils.lst>
 
 =head2 POSIX memory footprint
 
@@ -199,6 +160,13 @@ in force at the __END__ block to be in force within each autoloaded subroutine.
 
 There's a similar problem with SelfLoader.
 
+=head2 profile installman
+
+The F<installman> script is slow. All it is doing text processing, which we're
+told is something Perl is good at. So it would be nice to know what it is doing
+that is taking so much CPU, and where possible address it.
+
+
 =head1 Tasks that need a little sysadmin-type knowledge
 
 Or if you prefer, tasks that you would learn from, and broaden your skills
@@ -355,6 +323,77 @@ file/directory copying back and forth.
 
 Make F<pod/roffitall> be updated by F<pod/buildtoc>.
 
+=head2 Split "linker" from "compiler"
+
+Right now, Configure probes for two commands, and sets two variables:
+
+=over 4
+
+=item * C<cc> (in F<cc.U>)
+
+This variable holds the name of a command to execute a C compiler which
+can resolve multiple global references that happen to have the same
+name.  Usual values are F<cc> and F<gcc>.
+Fervent ANSI compilers may be called F<c89>.  AIX has F<xlc>.
+
+=item * C<ld> (in F<dlsrc.U>)
+
+This variable indicates the program to be used to link
+libraries for dynamic loading.  On some systems, it is F<ld>.
+On ELF systems, it should be C<$cc>.  Mostly, we'll try to respect
+the hint file setting.
+
+=back
+
+There is an implicit historical assumption from around Perl5.000alpha
+something, that C<$cc> is also the correct command for linking object files
+together to make an executable. This may be true on Unix, but it's not true
+on other platforms, and there are a maze of work arounds in other places (such
+as F<Makefile.SH>) to cope with this.
+
+Ideally, we should create a new variable to hold the name of the executable
+linker program, probe for it in F<Configure>, and centralise all the special
+case logic there or in hints files.
+
+A small bikeshed issue remains - what to call it, given that C<$ld> is already
+taken (arguably for the wrong thing now, but on SunOS 4.1 it is the command
+for creating dynamically-loadable modules) and C<$link> could be confused with
+the Unix command line executable of the same name, which does something
+completely different. Andy Dougherty makes the counter argument "In parrot, I
+tried to call the command used to link object files and  libraries into an
+executable F<link>, since that's what my vaguely-remembered DOS and VMS
+experience suggested. I don't think any real confusion has ensued, so it's
+probably a reasonable name for perl5 to use."
+
+"Alas, I've always worried that introducing it would make things worse, 
+since now the module building utilities would have to look for 
+C<$Config{link}> and institute a fall-back plan if it weren't found."
+Although I can see that as confusing, given that C<$Config{d_link}> is true
+when (hard) links are available.
+
+=head2 Configure Windows using PowerShell
+
+Currently, Windows uses hard-coded config files based to build the
+config.h for compiling Perl.  Makefiles are also hard-coded and need to be 
+hand edited prior to building Perl. While this makes it easy to create a perl.exe 
+that works across multiple Windows versions, being able to accurately
+configure a perl.exe for a specific Windows versions and VS C++ would be
+a nice enhancement.  With PowerShell available on Windows XP and up, this 
+may now be possible.  Step 1 might be to investigate whether this is possible
+and use this to clean up our current makefile situation.  Step 2 would be to 
+see if there would be a way to use our existing metaconfig units to configure a
+Windows Perl or whether we go in a separate direction and make it so.  Of 
+course, we all know what step 3 is.
+
+=head2 decouple -g and -DDEBUGGING
+
+Currently F<Configure> automatically adds C<-DDEBUGGING> to the C compiler
+flags if it spots C<-g> in the optimiser flags. The pre-processor directive
+C<DEBUGGING> enables F<perl>'s command line C<-D> options, but in the process
+makes F<perl> slower. It would be good to disentangle this logic, so that
+C-level debugging with C<-g> and Perl level debugging with C<-D> can easily
+be enabled independently.
+
 =head1 Tasks that need a little C knowledge
 
 These tasks would need a little C knowledge, but don't need any specific
@@ -397,28 +436,6 @@ is currently no guarantee that passing no use64bitall option to the
 Configure process will build a 32bit perl. Implementing -Duse32bit*
 options would be nice for perl 5.12.
 
-=head2 Make it clear from -v if this is the exact official release
-
-Currently perl from C<p4>/C<rsync> ships with a F<patchlevel.h> file that
-usually defines one local patch, of the form "MAINT12345" or "RC1". The output
-of perl -v doesn't report that a perl isn't an official release, and this
-information can get lost in bugs reports. Because of this, the minor version
-isn't bumped up until RC time, to minimise the possibility of versions of perl
-escaping that believe themselves to be newer than they actually are.
-
-It would be useful to find an elegant way to have the "this is an interim
-maintenance release" or "this is a release candidate" in the terse -v output,
-and have it so that it's easy for the pumpking to remove this just as the
-release tarball is rolled up. This way the version pulled out of rsync would
-always say "I'm a development release" and it would be safe to bump the
-reported minor version as soon as a release ships, which would aid perl
-developers.
-
-This task is really about thinking of an elegant way to arrange the C source
-such that it's trivial for the Pumpking to flag "this is an official release"
-when making a tarball, yet leave the default source saying "I'm not the
-official release".
-
 =head2 Profile Perl - am I hot or not?
 
 The Perl source code is stable enough that it makes sense to profile it,
@@ -437,6 +454,8 @@ as part of exercising your skills with coverage and profiling tools you might
 want to determine what ops I<really> are the most commonly used. And in turn
 suggest evictions and promotions to achieve a better F<pp_hot.c>.
 
+One piece of Perl code that might make a good testbed is F<installman>.
+
 =head2 Allocate OPs from arenas
 
 Currently all new OP structures are individually malloc()ed and free()d.
@@ -535,6 +554,14 @@ probably aren't allocated/deallocated often enough for a speed saving. Whereas
 C<MAGIC> is allocated/deallocated more often, but in turn, is also something
 more externally visible, so changing the rules here may bite external code.
 
+=head2 Shared arenas
+
+Several SV body structs are now the same size, notably PVMG and PVGV, PVAV and
+PVHV, and PVCV and PVFM. It should be possible to allocate and return same
+sized bodies from the same actual arena, rather than maintaining one arena for
+each. This could save 4-6K per thread, of memory no longer tied up in the
+not-yet-allocated part of an arena.
+
 
 =head1 Tasks that need a knowledge of XS
 
@@ -542,17 +569,26 @@ These tasks would need C knowledge, and roughly the level of knowledge of
 the perl API that comes from writing modules that use XS to interface to
 C.
 
-=head2 investigate removing int_macro_int from POSIX.xs
+=head2 Remove the use of SVs as temporaries in dump.c
+
+F<dump.c> contains debugging routines to dump out the contains of perl data
+structures, such as C<SV>s, C<AV>s and C<HV>s. Currently, the dumping code
+B<uses> C<SV>s for its temporary buffers, which was a logical initial
+implementation choice, as they provide ready made memory handling.
 
-As a hang over from the original C<constant> implementation, F<POSIX.xs>
-contains a function C<int_macro_int> which in conjunction with C<AUTOLOAD> is
-used to wrap the C functions C<WEXITSTATUS>, C<WIFEXITED>, C<WIFSIGNALED>,
-C<WIFSTOPPED>, C<WSTOPSIG> and C<WTERMSIG>. It's probably worth replacing
-this complexity with 5 simple direct wrappings of those 5 functions.
+However, they also lead to a lot of confusion when it happens that what you're
+trying to debug is seen by the code in F<dump.c>, correctly or incorrectly, as
+a temporary scalar it can use for a temporary buffer. It's also not possible
+to dump scalars before the interpreter is properly set up, such as during
+ithreads cloning. It would be good to progressively replace the use of scalars
+as string accumulation buffers with something much simpler, directly allocated
+by C<malloc>. The F<dump.c> code is (or should be) only producing 7 bit
+US-ASCII, so output character sets are not an issue.
 
-However, it would be interesting if someone could measure the memory usage
-before and after, both for the case of C<use POSIX();> and the case of
-actually calling the Perl space functions.
+Producing and proving an internal simple buffer allocation would make it easier
+to re-write the internals of the PerlIO subsystem to avoid using C<SV>s for
+B<its> buffers, use of which can cause problems similar to those of F<dump.c>,
+at similar times.
 
 =head2 safely supporting POSIX SA_SIGINFO
 
@@ -776,6 +812,35 @@ also the warning messages (see L<perllexwarn>, C<warnings.pl>).
 These tasks would need C knowledge, and knowledge of how the interpreter works,
 or a willingness to learn.
 
+=head2 truncate() prototype
+
+The prototype of truncate() is currently C<$$>. It should probably
+be C<*$> instead. (This is changed in F<opcode.pl>)
+
+=head2 decapsulation of smart match argument
+
+Currently C<$foo ~~ $object> will die with the message "Smart matching a
+non-overloaded object breaks encapsulation". It would be nice to allow
+to bypass this by using explictly the syntax C<$foo ~~ %$object> or
+C<$foo ~~ @$object>.
+
+=head2 error reporting of [$a ; $b]
+
+Using C<;> inside brackets is a syntax error, and we don't propose to change
+that by giving it any meaning. However, it's not reported very helpfully:
+
+    $ perl -e '$a = [$b; $c];'
+    syntax error at -e line 1, near "$b;"
+    syntax error at -e line 1, near "$c]"
+    Execution of -e aborted due to compilation errors.
+
+It should be possible to hook into the tokeniser or the lexer, so that when a
+C<;> is parsed where it is not legal as a statement terminator (ie inside
+C<{}> used as a hashref, C<[]> or C<()>) it issues an error something like
+I<';' isn't legal inside an expression - if you need multiple statements use a
+do {...} block>. See the thread starting at
+http://www.xray.mpe.mpg.de/mailing-lists/perl5-porters/2008-09/msg00573.html
+
 =head2 lexicals used only once
 
 This warns:
@@ -837,6 +902,15 @@ L<http://www.xray.mpe.mpg.de/mailing-lists/perl5-porters/2007-03/msg00481.html>
 There is no method on tied filehandles to allow them to be called back by
 formats.
 
+=head2 Propagate compilation hints to the debugger
+
+Currently a debugger started with -dE on the command-line doesn't see the
+features enabled by -E. More generally hints (C<$^H> and C<%^H>) aren't
+propagated to the debugger. Probably it would be a good thing to propagate
+hints from the innermost non-C<DB::> scope: this would make code eval'ed
+in the debugger see the features (and strictures, etc.) currently in
+scope.
+
 =head2 Attach/detach debugger from running program
 
 The old perltodo notes "With C<gdb>, you can attach the debugger to a running
@@ -844,22 +918,11 @@ program if you pass the process ID. It would be good to do this with the Perl
 debugger on a running Perl program, although I'm not sure how it would be
 done." ssh and screen do this with named pipes in /tmp. Maybe we can too.
 
-=head2 Optimize away empty destructors
-
-Defining an empty DESTROY method might be useful (notably in
-AUTOLOAD-enabled classes), but it's still a bit expensive to call. That
-could probably be optimized.
-
 =head2 LVALUE functions for lists
 
 The old perltodo notes that lvalue functions don't work for list or hash
 slices. This would be good to fix.
 
-=head2 LVALUE functions in the debugger
-
-The old perltodo notes that lvalue functions don't work in the debugger. This
-would be good to fix.
-
 =head2 regexp optimiser optional
 
 The regexp optimiser is not optional. It should configurable to be, to allow
@@ -953,7 +1016,7 @@ See also L</"Extend PerlIO and PerlIO::Scalar">.
 
 =head2 Investigate PADTMP hash pessimisation
 
-The peephole optimier converts constants used for hash key lookups to shared
+The peephole optimiser converts constants used for hash key lookups to shared
 hash key scalars. Under ithreads, something is undoing this work.
 See http://www.xray.mpe.mpg.de/mailing-lists/perl5-porters/2007-09/msg00793.html
 
@@ -1103,3 +1166,24 @@ This will allow the use of a regex from inside (?{ }), (??{ }) and
 Apparently these are quite useful. Anyway, Jeffery Friedl wants them.
 
 demerphq has this on his todo list, but right at the bottom.  
+
+
+=head1 Tasks for microperl
+
+
+[ Each and every one of these may be obsolete, but they were listed
+  in the old Todo.micro file]
+
+
+=head2 make creating uconfig.sh automatic 
+
+=head2 make creating Makefile.micro automatic
+
+=head2 do away with fork/exec/wait?
+
+(system, popen should be enough?)
+
+=head2 some of the uconfig.sh really needs to be probed (using cc) in buildtime:
+
+(uConfigure? :-) native datatype widths and endianness come to mind
+