X-Git-Url: http://git.shadowcat.co.uk/gitweb/gitweb.cgi?a=blobdiff_plain;f=pod%2Fperlfaq8.pod;h=e2cc1faa900130746c937032e9cbc8d964e357e5;hb=6d3b25aa06c9837fbb97c3791369b6d8990787c7;hp=2a99a6b2d2c3fdb4ecf4e965fc4dcc4b418182d3;hpb=29b1171f4855a4d7dde65e9a208eaf333296dbfa;p=p5sagit%2Fp5-mst-13.2.git diff --git a/pod/perlfaq8.pod b/pod/perlfaq8.pod index 2a99a6b..e2cc1fa 100644 --- a/pod/perlfaq8.pod +++ b/pod/perlfaq8.pod @@ -1,6 +1,6 @@ =head1 NAME -perlfaq8 - System Interaction ($Revision: 1.7 $, $Date: 2002/04/18 14:23:15 $) +perlfaq8 - System Interaction ($Revision: 1.17 $, $Date: 2003/01/26 17:44:04 $) =head1 DESCRIPTION @@ -77,7 +77,7 @@ Or like this: Controlling input buffering is a remarkably system-dependent matter. On many systems, you can just use the B command as shown in L, but as you see, that's already getting you into -portability snags. +portability snags. open(TTY, "+/dev/tty 2>&1"; @@ -188,14 +188,14 @@ positions, etc, you might wish to use Term::Cap module: =head2 How do I get the screen size? -If you have Term::ReadKey module installed from CPAN, +If you have Term::ReadKey module installed from CPAN, you can use it to fetch the width and height in characters and in pixels: use Term::ReadKey; ($wchar, $hchar, $wpixels, $hpixels) = GetTerminalSize(); -This is more portable than the raw C, but not as +This is more portable than the raw C, but not as illustrative: require 'sys/ioctl.ph'; @@ -275,7 +275,7 @@ next. If you expect characters to get to your device when you print() them, you'll want to autoflush that filehandle. You can use select() -and the C<$|> variable to control autoflushing (see L +and the C<$|> variable to control autoflushing (see L> and L, or L, ``How do I flush/unbuffer an output filehandle? Why must I do this?''): @@ -346,7 +346,12 @@ passwd(1), for example). =head2 How do I start a process in the background? -You could use +Several modules can start other processes that do not block +your Perl program. You can use IPC::Open3, Parallel::Jobs, +IPC::Run, and some of the POE modules. See CPAN for more +details. + +You could also use system("cmd &") @@ -375,10 +380,26 @@ not an issue with C. =item Zombies -You have to be prepared to "reap" the child process when it finishes +You have to be prepared to "reap" the child process when it finishes. $SIG{CHLD} = sub { wait }; + $SIG{CHLD} = 'IGNORE'; + +You can also use a double fork. You immediately wait() for your +first child, and the init daemon will wait() for your grandchild once +it exits. + + unless ($pid = fork) { + unless (fork) { + exec "what you really wanna do"; + die "exec failed!"; + } + exit 0; + } + waitpid($pid,0); + + See L for other examples of code to do this. Zombies are not an issue with C. @@ -424,8 +445,8 @@ If perl was installed correctly and your shadow library was written properly, the getpw*() functions described in L should in theory provide (read-only) access to entries in the shadow password file. To change the file, make a new shadow password file (the format -varies from system to system--see L for specifics) and use -pwd_mkdb(8) to install it (see L for more details). +varies from system to system--see L for specifics) and use +pwd_mkdb(8) to install it (see L for more details). =head2 How do I set the time and date? @@ -490,14 +511,14 @@ something like this: Release 5 of Perl added the END block, which can be used to simulate atexit(). Each package's END block is called when the program or -thread ends (see L manpage for more details). +thread ends (see L manpage for more details). For example, you can use this to make sure your filter program managed to finish its output without filling up the disk: END { close(STDOUT) || die "stdout close failed: $!"; - } + } The END block isn't called when untrapped signals kill the program, though, so if you use END blocks you should also use @@ -535,7 +556,10 @@ syscall(), you can use the syscall function (documented in L). Remember to check the modules that came with your distribution, and -CPAN as well--someone may already have written a module to do it. +CPAN as well---someone may already have written a module to do it. On +Windows, try Win32::API. On Macs, try Mac::Carbon. If no module +has an interface to the C function, you can inline a bit of C in your +Perl source with Inline::C. =head2 Where do I get the include files to do ioctl() or syscall()? @@ -573,8 +597,8 @@ scripts inherently insecure. Perl gives you a number of options The IPC::Open2 module (part of the standard perl distribution) is an easy-to-use approach that internally uses pipe(), fork(), and exec() to do the job. Make sure you read the deadlock warnings in its documentation, -though (see L). See -L and +though (see L). See +L and L You may also use the IPC::Open3 module (part of the standard perl @@ -604,6 +628,68 @@ With system(), both STDOUT and STDERR will go the same place as the script's STDOUT and STDERR, unless the system() command redirects them. Backticks and open() read B the STDOUT of your command. +You can also use the open3() function from IPC::Open3. Benjamin +Goldberg provides some sample code: + +To capture a program's STDOUT, but discard its STDERR: + + use IPC::Open3; + use File::Spec; + use Symbol qw(gensym); + open(NULL, ">", File::Spec->devnull); + my $pid = open3(gensym, \*PH, ">&NULL", "cmd"); + while( ) { } + waitpid($pid, 0); + +To capture a program's STDERR, but discard its STDOUT: + + use IPC::Open3; + use File::Spec; + use Symbol qw(gensym); + open(NULL, ">", File::Spec->devnull); + my $pid = open3(gensym, ">&NULL", \*PH, "cmd"); + while( ) { } + waitpid($pid, 0); + +To capture a program's STDERR, and let its STDOUT go to our own STDERR: + + use IPC::Open3; + use Symbol qw(gensym); + my $pid = open3(gensym, ">&STDERR", \*PH, "cmd"); + while( ) { } + waitpid($pid, 0); + +To read both a command's STDOUT and its STDERR separately, you can +redirect them to temp files, let the command run, then read the temp +files: + + use IPC::Open3; + use Symbol qw(gensym); + use IO::File; + local *CATCHOUT = IO::File->new_tempfile; + local *CATCHERR = IO::File->new_tempfile; + my $pid = open3(gensym, ">&CATCHOUT", ">&CATCHERR", "cmd"); + waitpid($pid, 0); + seek $_, 0, 0 for \*CATCHOUT, \*CATCHERR; + while( ) {} + while( ) {} + +But there's no real need for *both* to be tempfiles... the following +should work just as well, without deadlocking: + + use IPC::Open3; + use Symbol qw(gensym); + use IO::File; + local *CATCHERR = IO::File->new_tempfile; + my $pid = open3(gensym, \*CATCHOUT, ">&CATCHERR", "cmd"); + while( ) {} + waitpid($pid, 0); + seek CATCHERR, 0, 0; + while( ) {} + +And it'll be faster, too, since we can begin processing the program's +stdout immediately, rather than waiting for the program to finish. + With any of these, you can change file descriptors before the call: open(STDOUT, ">logfile"); @@ -636,7 +722,7 @@ Note that you I use Bourne shell (sh(1)) redirection syntax in backticks, not csh(1)! Details on why Perl's system() and backtick and pipe opens all use the Bourne shell are in the F article in the "Far More Than You Ever Wanted To -Know" collection in http://www.cpan.org/olddoc/FMTEYEWTK.tgz . To +Know" collection in http://www.cpan.org/misc/olddoc/FMTEYEWTK.tgz . To capture a command's STDERR and STDOUT together: $output = `cmd 2>&1`; # either with backticks @@ -663,10 +749,10 @@ but leave its STDOUT to come out our old STDERR: while () { } # plus a read To read both a command's STDOUT and its STDERR separately, it's easiest -and safest to redirect them separately to files, and then read from those -files when the program is done: +to redirect them separately to files, and then read from those files +when the program is done: - system("program args 1>/tmp/program.stdout 2>/tmp/program.stderr"); + system("program args 1>program.stdout 2>program.stderr"); Ordering is important in all these examples. That's because the shell processes file descriptor redirections in strictly left to right order. @@ -680,7 +766,7 @@ there, and the old standard error shows up on the old standard out. =head2 Why doesn't open() return an error when a pipe open fails? -If the second argument to a piped C contains shell +If the second argument to a piped open() contains shell metacharacters, perl fork()s, then exec()s a shell to decode the metacharacters and eventually run the desired program. If the program couldn't be run, it's the shell that gets the message, not Perl. All @@ -688,9 +774,9 @@ your Perl program can find out is whether the shell itself could be successfully started. You can still capture the shell's STDERR and check it for error messages. See L<"How can I capture STDERR from an external command?"> elsewhere in this document, or use the -L module. +IPC::Open3 module. -If there are no shell metacharacters in the argument of C, Perl +If there are no shell metacharacters in the argument of open(), Perl runs the command directly, without using the shell, and can correctly report whether the command started. @@ -700,7 +786,7 @@ Strictly speaking, nothing. Stylistically speaking, it's not a good way to write maintainable code. Perl has several operators for running external commands. Backticks are one; they collect the output from the command for use in your program. The C function is -another; it doesn't do this. +another; it doesn't do this. Writing backticks in your program sends a clear message to the readers of your code that you wanted to collect the output of the command. @@ -728,11 +814,20 @@ processing may take place, whereas backticks do not. =head2 How can I call backticks without shell processing? -This is a bit tricky. Instead of writing +This is a bit tricky. You can't simply write the command +like this: @ok = `grep @opts '$search_string' @filenames`; -You have to do this: +As of Perl 5.8.0, you can use open() with multiple arguments. +Just like the list forms of system() and exec(), no shell +escapes happen. + + open( GREP, "-|", 'grep', @opts, $search_string, @filenames ); + chomp(@ok = ); + close GREP; + +You can also: my @ok = (); if (open(GREP, "-|")) { @@ -748,12 +843,9 @@ You have to do this: Just as with system(), no shell escapes happen when you exec() a list. Further examples of this can be found in L. -Note that if you're stuck on Microsoft, no solution to this vexing issue +Note that if you're use Microsoft, no solution to this vexing issue is even possible. Even if Perl were to emulate fork(), you'd still -be hosed, because Microsoft gives no argc/argv-style API. Their API -always reparses from a single string, which is fundamentally wrong, -but you're not likely to get the Gods of Redmond to acknowledge this -and fix it for you. +be stuck, because Microsoft does not have a argc/argv-style API. =head2 Why can't my script read from STDIN after I gave it EOF (^D on Unix, ^Z on MS-DOS)? @@ -855,7 +947,7 @@ different process from the shell it was started from. Changes to a process are not reflected in its parent--only in any children created after the change. There is shell magic that may allow you to fake it by eval()ing the script's output in your shell; check out the -comp.unix.questions FAQ for details. +comp.unix.questions FAQ for details. =back @@ -876,7 +968,7 @@ module for other solutions. =item * -Open /dev/tty and use the TIOCNOTTY ioctl on it. See L +Open /dev/tty and use the TIOCNOTTY ioctl on it. See L for details. Or better yet, you can just use the POSIX::setsid() function, so you don't have to worry about process groups. @@ -929,6 +1021,9 @@ handler, as documented in L and the section on ``Signals'' in the Camel. You may instead use the more flexible Sys::AlarmCall module available from CPAN. +The alarm() function is not implemented on all versions of Windows. +Check the documentation for your specific version of Perl. + =head2 How do I set CPU limits? Use the BSD::Resource module from CPAN. @@ -937,13 +1032,19 @@ Use the BSD::Resource module from CPAN. Use the reaper code from L to call wait() when a SIGCHLD is received, or else use the double-fork technique described -in L. +in L. =head2 How do I use an SQL database? -There are a number of excellent interfaces to SQL databases. See the -DBD::* modules available from http://www.cpan.org/modules/DBD . -A lot of information on this can be found at http://dbi.perl.org/ +The DBI module provides an abstract interface to most database +servers and types, including Oracle, DB2, Sybase, mysql, Postgresql, +ODBC, and flat files. The DBI module accesses each database type +through a database driver, or DBD. You can see a complete list of +available drivers on CPAN: http://www.cpan.org/modules/by-module/DBD/ . +You can read more about DBI on http://dbi.perl.org . + +Other modules provide more specific access: Win32::ODBC, Alzabo, iodbc, +and others found on CPAN Search: http://search.cpan.org . =head2 How do I make a system() exit on control-C? @@ -952,7 +1053,7 @@ sample code) and then have a signal handler for the INT signal that passes the signal on to the subprocess. Or you can check for it: $rc = system($cmd); - if ($rc & 127) { die "signal death" } + if ($rc & 127) { die "signal death" } =head2 How do I open a file without blocking? @@ -962,15 +1063,23 @@ O_NDELAY or O_NONBLOCK flag from the Fcntl module in conjunction with sysopen(): use Fcntl; - sysopen(FH, "/tmp/somefile", O_WRONLY|O_NDELAY|O_CREAT, 0644) - or die "can't open /tmp/somefile: $!": + sysopen(FH, "/foo/somefile", O_WRONLY|O_NDELAY|O_CREAT, 0644) + or die "can't open /foo/somefile: $!": =head2 How do I install a module from CPAN? The easiest way is to have a module also named CPAN do it for you. -This module comes with perl version 5.004 and later. To manually install -the CPAN module, or any well-behaved CPAN module for that matter, follow -these steps: +This module comes with perl version 5.004 and later. + + $ perl -MCPAN -e shell + + cpan shell -- CPAN exploration and modules installation (v1.59_54) + ReadLine support enabled + + cpan> install Some::Module + +To manually install the CPAN module, or any well-behaved CPAN module +for that matter, follow these steps: =over 4 @@ -1029,20 +1138,20 @@ In general, you usually want C and a proper Perl module. =head2 How do I keep my own module/library directory? -When you build modules, use the PREFIX option when generating +When you build modules, use the PREFIX and LIB options when generating Makefiles: - perl Makefile.PL PREFIX=/u/mydir/perl + perl Makefile.PL PREFIX=/mydir/perl LIB=/mydir/perl/lib then either set the PERL5LIB environment variable before you run scripts that use the modules/libraries (see L) or say - use lib '/u/mydir/perl'; + use lib '/mydir/perl/lib'; This is almost the same as BEGIN { - unshift(@INC, '/u/mydir/perl'); + unshift(@INC, '/mydir/perl/lib'); } except that the lib module checks for machine-dependent subdirectories. @@ -1054,7 +1163,7 @@ See Perl's L for more information. use lib "$FindBin::Bin"; use your_own_modules; -=head2 How do I add a directory to my include path at runtime? +=head2 How do I add a directory to my include path (@INC) at runtime? Here are the suggested ways of modifying your include path: @@ -1076,7 +1185,7 @@ but other times it is not. Modern programs C instead. =head1 AUTHOR AND COPYRIGHT -Copyright (c) 1997-2002 Tom Christiansen and Nathan Torkington. +Copyright (c) 1997-2003 Tom Christiansen and Nathan Torkington. All rights reserved. This documentation is free; you can redistribute it and/or modify it