X-Git-Url: http://git.shadowcat.co.uk/gitweb/gitweb.cgi?a=blobdiff_plain;f=pod%2Fperlebcdic.pod;h=12ea2f3ef4b1634e54918ee732f4bbd55fa5945e;hb=de4864e4e7ced178416488fa2591227064c3222d;hp=619cb9b82fcc9e9e8195a73ce0a69baecaee1474;hpb=a31a806a8f483dfa4e00e0ac91d9875a8d724cff;p=p5sagit%2Fp5-mst-13.2.git diff --git a/pod/perlebcdic.pod b/pod/perlebcdic.pod index 619cb9b..12ea2f3 100644 --- a/pod/perlebcdic.pod +++ b/pod/perlebcdic.pod @@ -17,9 +17,9 @@ Portions that are still incomplete are marked with XXX. The American Standard Code for Information Interchange is a set of integers running from 0 to 127 (decimal) that imply character interpretation by the display and other system(s) of computers. -The range 0..127 is covered by setting the bits in a 7-bit binary +The range 0..127 can be covered by setting the bits in a 7-bit binary digit, hence the set is sometimes referred to as a "7-bit ASCII". -ASCII was described by the American National Standards Instute +ASCII was described by the American National Standards Institute document ANSI X3.4-1986. It was also described by ISO 646:1991 (with localization for currency symbols). The full ASCII set is given in the table below as the first 128 elements. Languages that @@ -27,6 +27,10 @@ can be written adequately with the characters in ASCII include English, Hawaiian, Indonesian, Swahili and some Native American languages. +There are many character sets that extend the range of integers +from 0..2**7-1 up to 2**8-1, or 8 bit bytes (octets if you prefer). +One common one is the ISO 8859-1 character set. + =head2 ISO 8859 The ISO 8859-$n are a collection of character code sets from the @@ -46,33 +50,39 @@ German can use ISO 8859-1 but must do so without German-style quotation marks. This set is based on Western European extensions to ASCII and is commonly encountered in world wide web work. In IBM character code set identification terminology ISO 8859-1 is -known as CCSID 819 (or sometimes 0819 or even 00819). +also known as CCSID 819 (or sometimes 0819 or even 00819). =head2 EBCDIC -Extended Binary Coded Decimal Interchange Code. The EBCDIC acronym -refers to a large collection of slightly different single and -multi byte coded character sets that are different from ASCII or -ISO 8859-1 and typically run on host computers. The -EBCDIC encodings derive from Hollerith punched card encodings. +The Extended Binary Coded Decimal Interchange Code refers to a +large collection of slightly different single and multi byte +coded character sets that are different from ASCII or ISO 8859-1 +and typically run on host computers. The EBCDIC encodings derive +from 8 bit byte extensions of Hollerith punched card encodings. The layout on the cards was such that high bits were set for the upper and lower case alphabet characters [a-z] and [A-Z], but there were gaps within each latin alphabet range. +Some IBM EBCDIC character sets may be known by character code set +identification numbers (CCSID numbers) or code page numbers. Leading +zero digits in CCSID numbers within this document are insignificant. +E.g. CCSID 0037 may be referred to as 37 in places. + =head2 13 variant characters -XXX. +Among IBM EBCDIC character code sets there are 13 characters that +are often mapped to different integer values. Those characters +are known as the 13 "variant" characters and are: -EBCDIC character sets may be known by character code set identification -numbers (CCSID numbers) or code page numbers. + \ [ ] { } ^ ~ ! # | $ @ ` =head2 0037 Character code set ID 0037 is a mapping of the ASCII plus Latin-1 characters (i.e. ISO 8859-1) to an EBCDIC set. 0037 is used -on the OS/400 operating system that runs on AS/400 computers. -CCSID 37 differs from ISO 8859-1 in 237 places, in other words -they agree on only 19 code point values. +in North American English locales on the OS/400 operating system +that runs on AS/400 computers. CCSID 37 differs from ISO 8859-1 +in 237 places, in other words they agree on only 19 code point values. =head2 1047 @@ -96,14 +106,15 @@ extensions to ASCII have been labelled with character names roughly corresponding to I albeit with substitutions such as s/LATIN// and s/VULGAR// in all cases, s/CAPITAL LETTER// in some cases, and s/SMALL LETTER ([A-Z])/\l$1/ -in some other cases. The "names" of the C1 control set -(128..159 in ISO 8859-1) are somewhat arbitrary. The differences -between the 0037 and 1047 sets are flagged with ***. The differences -between the 1047 and POSIX-BC sets are flagged with ###. -All ord() numbers listed are decimal. If you would rather see this -table listing octal values then run the table (that is, the pod -version of this document since this recipe may not work with -a pod2XXX translation to another format) through: +in some other cases (the C pragma names unfortunately do +not list explicit names for the C0 or C1 control characters). The +"names" of the C1 control set (128..159 in ISO 8859-1) listed here are +somewhat arbitrary. The differences between the 0037 and 1047 sets are +flagged with ***. The differences between the 1047 and POSIX-BC sets +are flagged with ###. All ord() numbers listed are decimal. If you +would rather see this table listing octal values then run the table +(that is, the pod version of this document since this recipe may not +work with a pod2_other_format translation) through: =over 4 @@ -396,7 +407,7 @@ ASCII + Latin-1 order then run the table through: =back - perl -ne 'if(/.{33}\d{1,3}\s{6,8}\d{1,3}\s{6,8}\d{1,3}\s{6,8}\s{1,3}/)'\ + perl -ne 'if(/.{33}\d{1,3}\s{6,8}\d{1,3}\s{6,8}\d{1,3}\s{6,8}\d{1,3}/)'\ -e '{push(@l,$_)}' \ -e 'END{print map{$_->[0]}' \ -e ' sort{$a->[1] <=> $b->[1]}' \ @@ -411,7 +422,7 @@ If you would rather see it in CCSID 1047 order then change the digit =back - perl -ne 'if(/.{33}\d{1,3}\s{6,8}\d{1,3}\s{6,8}\d{1,3}\s{6,8}\s{1,3}/)'\ + perl -ne 'if(/.{33}\d{1,3}\s{6,8}\d{1,3}\s{6,8}\d{1,3}\s{6,8}\d{1,3}/)'\ -e '{push(@l,$_)}' \ -e 'END{print map{$_->[0]}' \ -e ' sort{$a->[1] <=> $b->[1]}' \ @@ -426,7 +437,7 @@ If you would rather see it in POSIX-BC order then change the digit =back - perl -ne 'if(/.{33}\d{1,3}\s{6,8}\d{1,3}\s{6,8}\d{1,3}\s{6,8}\s{1,3}/)'\ + perl -ne 'if(/.{33}\d{1,3}\s{6,8}\d{1,3}\s{6,8}\d{1,3}\s{6,8}\d{1,3}/)'\ -e '{push(@l,$_)}' \ -e 'END{print map{$_->[0]}' \ -e ' sort{$a->[1] <=> $b->[1]}' \ @@ -442,7 +453,7 @@ character values. For example: $is_ascii = "A" eq chr(65); $is_ebcdic = "A" eq chr(193); -"\t" is a . So that: +Also, "\t" is a C character so that: $is_ascii = ord("\t") == 9; $is_ebcdic = ord("\t") == 5; @@ -476,10 +487,12 @@ To determine whether or not perl was built under an EBCDIC code page you can use the Config module like so: use Config; - $is_ebcdic = $Config{ebcdic} eq 'define'; + $is_ebcdic = $Config{'ebcdic'} eq 'define'; =head1 CONVERSIONS +=head2 tr/// + In order to convert a string of characters from one character set to another a simple list of numbers, such as in the right columns in the above table, along with perl's tr/// operator is all that is needed. @@ -488,7 +501,8 @@ provide easy to use ASCII to EBCDIC operations that are also easily reversed. For example, to convert ASCII to code page 037 take the output of the second -column from the output of recipe 0 and use it in tr/// like so: +column from the output of recipe 0 (modified to add \\ characters) and use +it in tr/// like so: $cp_037 = '\000\001\002\003\234\011\206\177\227\215\216\013\014\015\016\017' . @@ -509,33 +523,41 @@ column from the output of recipe 0 and use it in tr/// like so: '\060\061\062\063\064\065\066\067\070\071\263\333\334\331\332\237' ; my $ebcdic_string = $ascii_string; - $ebcdic_string = tr/\000-\377/$cp_037/; + eval '$ebcdic_string =~ tr/\000-\377/' . $cp_037 . '/'; -To convert from EBCDIC to ASCII just reverse the order of the tr/// +To convert from EBCDIC 037 to ASCII just reverse the order of the tr/// arguments like so: my $ascii_string = $ebcdic_string; - $ascii_string = tr/$code_page_chrs/\000-\037/; + eval '$ascii_string = tr/' . $cp_037 . '/\000-\377/'; + +Similarly one could take the output of the third column from recipe 0 to +obtain a C<$cp_1047> table. The fourth column of the output from recipe +0 could provide a C<$cp_posix_bc> table suitable for transcoding as well. -XPG4 interoperability often implies the presence of an I utility +=head2 iconv + +XPG operability often implies the presence of an I utility available from the shell or from the C library. Consult your system's documentation for information on iconv. On OS/390 see the iconv(1) man page. One way to invoke the iconv shell utility from within perl would be to: + # OS/390 example $ascii_data = `echo '$ebcdic_data'| iconv -f IBM-1047 -t ISO8859-1` or the inverse map: + # OS/390 example $ebcdic_data = `echo '$ascii_data'| iconv -f ISO8859-1 -t IBM-1047` -XXX iconv under qsh on OS/400? -XXX iconv on VM? -XXX iconv on BS2k? - For other perl based conversion options see the Convert::* modules on CPAN. +=head2 C RTL + +The OS/390 C run time library provides _atoe() and _etoa() functions. + =head1 OPERATOR DIFFERENCES The C<..> range operator treats certain character ranges with @@ -558,17 +580,20 @@ an example adapted from the one in L: An interesting property of the 32 C0 control characters in the ASCII table is that they can "literally" be constructed -as control characters in perl, e.g. (chr(0) eq "\c@"), -(chr(1) eq "\cA"), and so on. Perl on EBCDIC machines has been -ported to take "\c@" -> chr(0) and "\cA" -> chr(1) as well, but the +as control characters in perl, e.g. C<(chr(0) eq "\c@")> +C<(chr(1) eq "\cA")>, and so on. Perl on EBCDIC machines has been +ported to take "\c@" to chr(0) and "\cA" to chr(1) as well, but the thirty three characters that result depend on which code page you are using. The table below uses the character names from the previous table -but with substitions such as s/START OF/S.O./; s/END OF /E.O./; +but with substitutions such as s/START OF/S.O./; s/END OF /E.O./; s/TRANSMISSION/TRANS./; s/TABULATION/TAB./; s/VERTICAL/VERT./; s/HORIZONTAL/HORIZ./; s/DEVICE CONTROL/D.C./; s/SEPARATOR/SEP./; s/NEGATIVE ACKNOWLEDGE/NEG. ACK./;. The POSIX-BC and 1047 sets are identical throughout this range and differ from the 0037 set at only -one spot (21 decimal). Note that "\c\\" maps to two characters +one spot (21 decimal). Note that the C character +may be generated by "\cJ" on ASCII machines but by "\cU" on 1047 or POSIX-BC +machines and cannot be generated as a C<"\c.letter."> control character on +0037 machines. Note also that "\c\\" maps to two characters not one. chr ord 8859-1 0037 1047 && POSIX-BC @@ -690,14 +715,16 @@ See the discussion of pack() above. As of perl 5.005_03 the letter range regular expression such as [A-Z] and [a-z] have been especially coded to not pick up gap -characters. For example characters such as -that lie between I and J would not be matched by C. -If you do want to match such characters in a single octet +characters. For example, characters such as E C +that lie between I and J would not be matched by the +regular expression range C. + +If you do want to match the alphabet gap characters in a single octet regular expression try matching the hex or octal code such as C on EBCDIC or C on ASCII machines to -have your regular expression match . +have your regular expression match C. -Another place to be wary of is the inappropriate use of hex or +Another construct to be wary of is the inappropriate use of hex or octal constants in regular expressions. Consider the following set of subs: @@ -726,9 +753,9 @@ set of subs: $char =~ /[\240-\377]/; } -The above would be adequate if the concern was only with numeric codepoints. -However, we may actually be concerned with characters rather than codepoints -and on an EBCDIC machine would like for constructs such as +The above would be adequate if the concern was only with numeric code points. +However, the concern may be with characters rather than code points +and on an EBCDIC machine it may be desirable for constructs such as C to print out the expected message. One way to represent the above collection of character classification subs that is capable of working across the @@ -809,7 +836,6 @@ to use the characters in the range explicitly: Although that form may run into trouble in network transit (due to the presence of 8 bit characters) or on non ISO-Latin character sets. - =head1 SOCKETS @@ -827,41 +853,53 @@ letters compared to the digits. If sorted on an ASCII based machine the two letter abbreviation for a physician comes before the two letter for drive, that is: - @sorted = sort(qw(Dr. dr.)); # @sorted holds qw(Dr. dr.) on ASCII, - # qw(dr. Dr.) on EBCDIC + @sorted = sort(qw(Dr. dr.)); # @sorted holds ('Dr.','dr.') on ASCII, + # but ('dr.','Dr.') on EBCDIC The property of lower case before uppercase letters in EBCDIC is even carried to the Latin 1 EBCDIC pages such as 0037 and 1047. -An example would be that (203) comes before - (235) on and ASCII machine, but the latter (83) -comes before the former (115) on an EBCDIC machine. (Astute readers will -note that the upper case version of is -simply "SS" and that the upper case version of -is not in the 0..255 range but it is at U+x0178 in Unicode). +An example would be that E C (203) comes +before E C (235) on an ASCII machine, but +the latter (83) comes before the former (115) on an EBCDIC machine. +(Astute readers will note that the upper case version of E +C is simply "SS" and that the upper case version of +E C is not in the 0..255 range but it is +at U+x0178 in Unicode, or C<"\x{178}"> in a Unicode enabled Perl). The sort order will cause differences between results obtained on ASCII machines versus EBCDIC machines. What follows are some suggestions on how to deal with these differences. -=head2 Ignore ASCII vs EBCDIC sort differences. +=head2 Ignore ASCII vs. EBCDIC sort differences. This is the least computationally expensive strategy. It may require some user education. -=head2 MONOCASE then sort data. +=head2 MONO CASE then sort data. -In order to minimize the expense of monocasing mixed test try to +In order to minimize the expense of mono casing mixed test try to C towards the character set case most employed within the data. If the data are primarily UPPERCASE non Latin 1 then apply tr/[a-z]/[A-Z]/ then sort(). If the data are primarily lowercase non Latin 1 then apply tr/[A-Z]/[a-z]/ before sorting. If the data are primarily UPPERCASE -and include Latin-1 characters then apply: tr/[a-z]/[A-Z]/; -XXX +and include Latin-1 characters then apply: + + tr/[a-z]/[A-Z]/; + tr/[àáâãäåæçèéêëìíîïðñòóôõöøùúûüýþ]/[ÀÁÂÃÄÅÆÇÈÉÊËÌÍÎÏÐÑÒÓÔÕÖØÙÚÛÜÝÞ]/; + s/ß/SS/g; + +then sort(). Do note however that such Latin-1 manipulation does not +address the E C character that will remain at +code point 255 on ASCII machines, but 223 on most EBCDIC machines +where it will sort to a place less than the EBCDIC numerals. With a +Unicode enabled Perl you might try: -This strategy does not preserve the case of the data and may not be -acceptable. + tr/^?/\x{178}/; -=head2 Convert, sort data, then reconvert. +The strategy of mono casing data before sorting does not preserve the case +of the data and may not be acceptable for that reason. + +=head2 Convert, sort data, then re convert. This is the most expensive proposition that does not employ a network connection. @@ -871,11 +909,18 @@ connection. This strategy can employ a network connection. As such it would be computationally expensive. -=head1 URL ENCODING and DECODING +=head1 TRANFORMATION FORMATS + +There are a variety of ways of transforming data with an intra character set +mapping that serve a variety of purposes. Sorting was discussed in the +previous section and a few of the other more popular mapping techniques are +discussed next. -Note that some URLs have hexadecimal ASCII codepoints in them in an -attempt to overcome character limitation issues. For example the -tilde character is not on every keyboard hence a URL of the form: +=head2 URL decoding and encoding + +Note that some URLs have hexadecimal ASCII code points in them in an +attempt to overcome character or protocol limitation issues. For example +the tilde character is not on every keyboard hence a URL of the form: http://www.pvhp.com/~pvhp/ @@ -885,7 +930,7 @@ may also be expressed as either of: http://www.pvhp.com/%7epvhp/ -where 7E is the hexadecimal ASCII codepoint for '~'. Here is an example +where 7E is the hexadecimal ASCII code point for '~'. Here is an example of decoding such a URL under CCSID 1047: $url = 'http://www.pvhp.com/%7Epvhp/'; @@ -910,6 +955,153 @@ of decoding such a URL under CCSID 1047: ); $url =~ s/%([0-9a-fA-F]{2})/pack("c",$a2e_1047[hex($1)])/ge; +Conversely, here is a partial solution for the task of encoding such +a URL under the 1047 code page: + + $url = 'http://www.pvhp.com/~pvhp/'; + # this array assumes code page 1047 + my @e2a_1047 = ( + 0, 1, 2, 3,156, 9,134,127,151,141,142, 11, 12, 13, 14, 15, + 16, 17, 18, 19,157, 10, 8,135, 24, 25,146,143, 28, 29, 30, 31, + 128,129,130,131,132,133, 23, 27,136,137,138,139,140, 5, 6, 7, + 144,145, 22,147,148,149,150, 4,152,153,154,155, 20, 21,158, 26, + 32,160,226,228,224,225,227,229,231,241,162, 46, 60, 40, 43,124, + 38,233,234,235,232,237,238,239,236,223, 33, 36, 42, 41, 59, 94, + 45, 47,194,196,192,193,195,197,199,209,166, 44, 37, 95, 62, 63, + 248,201,202,203,200,205,206,207,204, 96, 58, 35, 64, 39, 61, 34, + 216, 97, 98, 99,100,101,102,103,104,105,171,187,240,253,254,177, + 176,106,107,108,109,110,111,112,113,114,170,186,230,184,198,164, + 181,126,115,116,117,118,119,120,121,122,161,191,208, 91,222,174, + 172,163,165,183,169,167,182,188,189,190,221,168,175, 93,180,215, + 123, 65, 66, 67, 68, 69, 70, 71, 72, 73,173,244,246,242,243,245, + 125, 74, 75, 76, 77, 78, 79, 80, 81, 82,185,251,252,249,250,255, + 92,247, 83, 84, 85, 86, 87, 88, 89, 90,178,212,214,210,211,213, + 48, 49, 50, 51, 52, 53, 54, 55, 56, 57,179,219,220,217,218,159 + ); + # The following regular expression does not address the + # mappings for: ('.' => '%2E', '/' => '%2F', ':' => '%3A') + $url =~ s/([\t "#%&\(\),;<=>\?\@\[\\\]^`{|}~])/sprintf("%%%02X",$e2a_1047[ord($1)])/ge; + +where a more complete solution would split the URL into components +and apply a full s/// substitution only to the appropriate parts. + +In the remaining examples a @e2a or @a2e array may be employed +but the assignment will not be shown explicitly. For code page 1047 +you could use the @a2e_1047 or @e2a_1047 arrays just shown. + +=head2 uu encoding and decoding + +The C template to pack() or unpack() will render EBCDIC data in EBCDIC +characters equivalent to their ASCII counterparts. For example, the +following will print "Yes indeed\n" on either an ASCII or EBCDIC computer: + + $all_byte_chrs = ''; + for (0..255) { $all_byte_chrs .= chr($_); } + $uuencode_byte_chrs = pack('u', $all_byte_chrs); + ($uu = <<' ENDOFHEREDOC') =~ s/^\s*//gm; + M``$"`P0%!@<("0H+#`T.#Q`1$A,4%187&!D:&QP='A\@(2(C)"4F)R@I*BLL + M+2XO,#$R,S0U-C'EZ>WQ]?G^`@8*#A(6& + MAXB)BHN,C8Z/D)&2DY25EI>8F9J;G)V>GZ"AHJ.DI::GJ*FJJZRMKJ^PL;*S + MM+6VM[BYNKN\O;Z_P,'"P\3%QL?(R+CY.7FY^CIZNOL[>[O\/'R\_3U]O?X^?K[_/W^_P`` + ENDOFHEREDOC + if ($uuencode_byte_chrs eq $uu) { + print "Yes "; + } + $uudecode_byte_chrs = unpack('u', $uuencode_byte_chrs); + if ($uudecode_byte_chrs eq $all_byte_chrs) { + print "indeed\n"; + } + +Here is a very spartan uudecoder that will work on EBCDIC provided +that the @e2a array is filled in appropriately: + + #!/usr/local/bin/perl + @e2a = ( # this must be filled in + ); + $_ = <> until ($mode,$file) = /^begin\s*(\d*)\s*(\S*)/; + open(OUT, "> $file") if $file ne ""; + while(<>) { + last if /^end/; + next if /[a-z]/; + next unless int(((($e2a[ord()] - 32 ) & 077) + 2) / 3) == + int(length() / 4); + print OUT unpack("u", $_); + } + close(OUT); + chmod oct($mode), $file; + + +=head2 Quoted-Printable encoding and decoding + +On ASCII encoded machines it is possible to strip characters outside of +the printable set using: + + # This QP encoder works on ASCII only + $qp_string =~ s/([=\x00-\x1F\x80-\xFF])/sprintf("=%02X",ord($1))/ge; + +Whereas a QP encoder that works on both ASCII and EBCDIC machines +would look somewhat like the following (where the EBCDIC branch @e2a +array is omitted for brevity): + + if (ord('A') == 65) { # ASCII + $delete = "\x7F"; # ASCII + @e2a = (0 .. 255) # ASCII to ASCII identity map + } + else { # EBCDIC + $delete = "\x07"; # EBCDIC + @e2a = # EBCDIC to ASCII map (as shown above) + } + $qp_string =~ + s/([^ !"\#\$%&'()*+,\-.\/0-9:;<>?\@A-Z[\\\]^_`a-z{|}~$delete])/sprintf("=%02X",$e2a[ord($1)])/ge; + +(although in production code the substitutions might be done +in the EBCDIC branch with the @e2a array and separately in the +ASCII branch without the expense of the identity map). + +Such QP strings can be decoded with: + + # This QP decoder is limited to ASCII only + $string =~ s/=([0-9A-Fa-f][0-9A-Fa-f])/chr hex $1/ge; + $string =~ s/=[\n\r]+$//; + +Whereas a QP decoder that works on both ASCII and EBCDIC machines +would look somewhat like the following (where the @a2e array is +omitted for brevity): + + $string =~ s/=([0-9A-Fa-f][0-9A-Fa-f])/chr $a2e[hex $1]/ge; + $string =~ s/=[\n\r]+$//; + +=head2 Caesarian cyphers + +The practice of shifting an alphabet one or more characters for encipherment +dates back thousands of years and was explicitly detailed by Gaius Julius +Caesar in his B text. A single alphabet shift is sometimes +referred to as a rotation and the shift amount is given as a number $n after +the string 'rot' or "rot$n". Rot0 and rot26 would designate identity maps +on the 26 letter English version of the Latin alphabet. Rot13 has the +interesting property that alternate subsequent invocations are identity maps +(thus rot13 is its own non-trivial inverse in the group of 26 alphabet +rotations). Hence the following is a rot13 encoder and decoder that will +work on ASCII and EBCDIC machines: + + #!/usr/local/bin/perl + + while(<>){ + tr/n-za-mN-ZA-M/a-zA-Z/; + print; + } + +In one-liner form: + + perl -ne 'tr/n-za-mN-ZA-M/a-zA-Z/;print' + + +=head1 Hashing order and checksums + +XXX + =head1 I18N AND L10N Internationalization(I18N) and localization(L10N) are supported at least @@ -918,9 +1110,7 @@ and discussed under the L section below. =head1 MULTI OCTET CHARACTER SETS -Double byte EBCDIC code pages (?) XXX. - -UTF-8, UTF-EBCDIC, (?) XXX. +Multi byte EBCDIC code pages; Unicode, UTF-8, UTF-EBCDIC, XXX. =head1 OS ISSUES @@ -929,6 +1119,8 @@ of concern to EBCDIC Perl programmers. =head2 OS/400 +The PASE environment. + =over 8 =item IFS access @@ -939,8 +1131,15 @@ XXX. =head2 OS/390 +Perl runs under Unix Systems Services or USS. + =over 8 +=item chcp + +B is supported as a shell utility for displaying and changing +one's code page. See also L. + =item dataset access For sequential data set access try: @@ -953,6 +1152,11 @@ or: See also the OS390::Stdio module on CPAN. +=item OS/390 iconv + +B is supported as both a shell utility and a C RTL routine. +See also the iconv(1) and iconv(3) manual pages. + =item locales On OS/390 see L for information on locales. The L10N files @@ -968,19 +1172,44 @@ XXX. XXX. +=head1 BUGS + +This pod document contains literal Latin 1 characters and may encounter +translation difficulties. In particular one popular nroff implementation +was known to strip accented characters to their unaccented counterparts +while attempting to view this document through the B program +(for example, you may see a plain C rather than one with a diaeresis +as in E). Another nroff truncated the resultant man page at +the first occurence of 8 bit characters. + +Not all shells will allow multiple C<-e> string arguments to perl to +be concatenated together properly as recipes 2, 3, and 4 might seem +to imply. + +Perl does not yet work with any Unicode features on EBCDIC platforms. + +=head1 SEE ALSO + +L, L. + =head1 REFERENCES http://anubis.dkuug.dk/i18n/charmaps -L. - http://www.unicode.org/ http://www.unicode.org/unicode/reports/tr16/ +http://www.wps.com/texts/codes/ +B Tom Jennings, +September 1999. + B The Unicode Consortium, ISBN 0-201-48345-9, Addison Wesley Developers Press, July 1996. +B The Unicode Consortium, Lisa Moore ed., +ISBN 0-201-61633-5, Addison Wesley Developers Press, February 2000. + B, IBM SC09-2190-00, December 1996. @@ -988,14 +1217,19 @@ Reference and Registry>, IBM SC09-2190-00, December 1996. & Technology, B<#26 Vol. 10 Issue 4>, August/September 1999; ISSN 1523-0309; Multilingual Computing Inc. Sandpoint ID, USA. +B +Fred B. Wrixon, ISBN 1-57912-040-7, Black Dog & Leventhal Publishers, +1998. + =head1 AUTHOR -Peter Prymmer Epvhp@best.comE wrote this in 1999 and 2000 +Peter Prymmer pvhp@best.com wrote this in 1999 and 2000 with CCSID 0819 and 0037 help from Chris Leach and -AndrE Pirard EA.Pirard@ulg.ac.beE as well as POSIX-BC -help from Thomas Dorner EThomas.Dorner@start.deE. -Thanks also to Philip Newton and Vickie Cooper. Trademarks, registered -trademarks, service marks and registered service marks used in this -document are the property of their respective owners. +AndrE Pirard A.Pirard@ulg.ac.be as well as POSIX-BC +help from Thomas Dorner Thomas.Dorner@start.de. +Thanks also to Vickie Cooper, Philip Newton, William Raffloer, and +Joe Smith. Trademarks, registered trademarks, service marks and +registered service marks used in this document are the property of +their respective owners.