X-Git-Url: http://git.shadowcat.co.uk/gitweb/gitweb.cgi?a=blobdiff_plain;f=perlio.h;h=a6902d4a956933c5ebcd68b888bb60201d05c0f3;hb=b3c649451aa23903a1f1aa5b0d54e8244611b239;hp=e699a3eafed03f7fffc8deaa3d41b08bfb0b5f76;hpb=c06ef2193827b22d14c89e18394d4c66189b9d90;p=p5sagit%2Fp5-mst-13.2.git

diff --git a/perlio.h b/perlio.h
index e699a3e..a6902d4 100644
--- a/perlio.h
+++ b/perlio.h
@@ -1 +1,394 @@
-#include "iperlsys.h"
+/*    perlio.h
+ *
+ *    Copyright (C) 1996, 1997, 1999, 2000, 2001, 2002, 2003,
+ *    2004, 2005, 2006, 2007, by Larry Wall and others
+ *
+ *    You may distribute under the terms of either the GNU General Public
+ *    License or the Artistic License, as specified in the README file.
+ *
+ */
+
+#ifndef _PERLIO_H
+#define _PERLIO_H
+/*
+  Interface for perl to IO functions.
+  There is a hierarchy of Configure determined #define controls:
+   USE_STDIO   - forces PerlIO_xxx() to be #define-d onto stdio functions.
+                 This is used for x2p subdirectory and for conservative
+                 builds - "just like perl5.00X used to be".
+                 This dominates over the others.
+
+   USE_PERLIO  - The primary Configure variable that enables PerlIO.
+                 If USE_PERLIO is _NOT_ set
+                   then USE_STDIO above will be set to be conservative.
+                 If USE_PERLIO is set
+                   then there are two modes determined by USE_SFIO:
+
+   USE_SFIO    - If set causes PerlIO_xxx() to be #define-d onto sfio functions.
+                 A backward compatability mode for some specialist applications.
+
+                 If USE_SFIO is not set then PerlIO_xxx() are real functions
+                 defined in perlio.c which implement extra functionality
+                 required for utf8 support.
+
+   One further note - the table-of-functions scheme controlled
+   by PERL_IMPLICIT_SYS turns on USE_PERLIO so that iperlsys.h can
+   #define PerlIO_xxx() to go via the function table, without having
+   to #undef them from (say) stdio forms.
+
+*/
+
+#if defined(PERL_IMPLICIT_SYS)
+#ifndef USE_PERLIO
+#ifndef NETWARE
+/* # define USE_PERLIO */
+#endif
+#endif
+#endif
+
+#ifndef USE_PERLIO
+# define USE_STDIO
+#endif
+
+#ifdef USE_STDIO
+#  ifndef PERLIO_IS_STDIO
+#      define PERLIO_IS_STDIO
+#  endif
+#endif
+
+/* --------------------  End of Configure controls ---------------------------- */
+
+/*
+ * Although we may not want stdio to be used including <stdio.h> here
+ * avoids issues where stdio.h has strange side effects
+ */
+#include <stdio.h>
+
+#ifdef __BEOS__
+int fseeko(FILE *stream, off_t offset, int whence);
+off_t ftello(FILE *stream);
+#endif
+
+#if defined(USE_64_BIT_STDIO) && defined(HAS_FTELLO) && !defined(USE_FTELL64)
+#define ftell ftello
+#endif
+
+#if defined(USE_64_BIT_STDIO) && defined(HAS_FSEEKO) && !defined(USE_FSEEK64)
+#define fseek fseeko
+#endif
+
+/* BS2000 includes are sometimes a bit non standard :-( */
+#if defined(POSIX_BC) && defined(O_BINARY) && !defined(O_TEXT)
+#undef O_BINARY
+#endif
+
+#ifdef PERLIO_IS_STDIO
+/* #define PerlIO_xxxx() as equivalent stdio function */
+#include "perlsdio.h"
+#else				/* PERLIO_IS_STDIO */
+#ifdef USE_SFIO
+/* #define PerlIO_xxxx() as equivalent sfio function */
+#include "perlsfio.h"
+#endif				/* USE_SFIO */
+#endif				/* PERLIO_IS_STDIO */
+
+#ifndef PerlIO
+/* ----------- PerlIO implementation ---------- */
+/* PerlIO not #define-d to something else - define the implementation */
+
+typedef struct _PerlIO PerlIOl;
+typedef struct _PerlIO_funcs PerlIO_funcs;
+typedef PerlIOl *PerlIO;
+#define PerlIO PerlIO
+#define PERLIO_LAYERS 1
+
+/* Making the big PerlIO_funcs vtables const is good (enables placing
+ * them in the const section which is good for speed, security, and
+ * embeddability) but this cannot be done by default because of
+ * backward compatibility. */
+#ifdef PERLIO_FUNCS_CONST
+#define PERLIO_FUNCS_DECL(funcs) const PerlIO_funcs funcs
+#define PERLIO_FUNCS_CAST(funcs) (PerlIO_funcs*)(funcs)
+#else
+#define PERLIO_FUNCS_DECL(funcs) PerlIO_funcs funcs
+#define PERLIO_FUNCS_CAST(funcs) (funcs)
+#endif
+
+PERL_EXPORT_C void PerlIO_define_layer(pTHX_ PerlIO_funcs *tab);
+PERL_EXPORT_C PerlIO_funcs *PerlIO_find_layer(pTHX_ const char *name,
+                                              STRLEN len,
+				              int load);
+PERL_EXPORT_C PerlIO *PerlIO_push(pTHX_ PerlIO *f, PERLIO_FUNCS_DECL(*tab),
+			          const char *mode, SV *arg);
+PERL_EXPORT_C void PerlIO_pop(pTHX_ PerlIO *f);
+PERL_EXPORT_C AV* PerlIO_get_layers(pTHX_ PerlIO *f);
+PERL_EXPORT_C void PerlIO_clone(pTHX_ PerlInterpreter *proto,
+                                CLONE_PARAMS *param);
+
+#endif				/* PerlIO */
+
+/* ----------- End of implementation choices  ---------- */
+
+#ifndef PERLIO_IS_STDIO
+/* Not using stdio _directly_ as PerlIO */
+
+/* We now need to determine  what happens if source trys to use stdio.
+ * There are three cases based on PERLIO_NOT_STDIO which XS code
+ * can set how it wants.
+ */
+
+#ifdef PERL_CORE
+/* Make a choice for perl core code
+   - currently this is set to try and catch lingering raw stdio calls.
+     This is a known issue with some non UNIX ports which still use
+     "native" stdio features.
+*/
+#ifndef PERLIO_NOT_STDIO
+#define PERLIO_NOT_STDIO 1
+#endif
+#else
+#ifndef PERLIO_NOT_STDIO
+#define PERLIO_NOT_STDIO 0
+#endif
+#endif
+
+#ifdef PERLIO_NOT_STDIO
+#if PERLIO_NOT_STDIO
+/*
+ * PERLIO_NOT_STDIO #define'd as 1
+ * Case 1: Strong denial of stdio - make all stdio calls (we can think of) errors
+ */
+#include "nostdio.h"
+#else				/* if PERLIO_NOT_STDIO */
+/*
+ * PERLIO_NOT_STDIO #define'd as 0
+ * Case 2: Declares that both PerlIO and stdio can be used
+ */
+#endif				/* if PERLIO_NOT_STDIO */
+#else				/* ifdef PERLIO_NOT_STDIO */
+/*
+ * PERLIO_NOT_STDIO not defined
+ * Case 3: Try and fake stdio calls as PerlIO calls
+ */
+#include "fakesdio.h"
+#endif				/* ifndef PERLIO_NOT_STDIO */
+#endif				/* PERLIO_IS_STDIO */
+
+/* ----------- fill in things that have not got #define'd  ---------- */
+
+#ifndef Fpos_t
+#define Fpos_t Off_t
+#endif
+
+#ifndef EOF
+#define EOF (-1)
+#endif
+
+/* This is to catch case with no stdio */
+#ifndef BUFSIZ
+#define BUFSIZ 1024
+#endif
+
+#ifndef SEEK_SET
+#define SEEK_SET 0
+#endif
+
+#ifndef SEEK_CUR
+#define SEEK_CUR 1
+#endif
+
+#ifndef SEEK_END
+#define SEEK_END 2
+#endif
+
+#define PERLIO_DUP_CLONE	1
+#define PERLIO_DUP_FD		2
+
+/* --------------------- Now prototypes for functions --------------- */
+
+START_EXTERN_C
+#ifndef __attribute__format__
+#  ifdef HASATTRIBUTE_FORMAT
+#    define __attribute__format__(x,y,z) __attribute__((format(x,y,z)))
+#  else
+#    define __attribute__format__(x,y,z)
+#  endif
+#endif
+#ifndef PerlIO_init
+PERL_EXPORT_C void PerlIO_init(pTHX);
+#endif
+#ifndef PerlIO_stdoutf
+PERL_EXPORT_C int PerlIO_stdoutf(const char *, ...)
+    __attribute__format__(__printf__, 1, 2);
+#endif
+#ifndef PerlIO_puts
+PERL_EXPORT_C int PerlIO_puts(PerlIO *, const char *);
+#endif
+#ifndef PerlIO_open
+PERL_EXPORT_C PerlIO *PerlIO_open(const char *, const char *);
+#endif
+#ifndef PerlIO_openn
+PERL_EXPORT_C PerlIO *PerlIO_openn(pTHX_ const char *layers, const char *mode,
+				   int fd, int imode, int perm, PerlIO *old,
+				   int narg, SV **arg);
+#endif
+#ifndef PerlIO_eof
+PERL_EXPORT_C int PerlIO_eof(PerlIO *);
+#endif
+#ifndef PerlIO_error
+PERL_EXPORT_C int PerlIO_error(PerlIO *);
+#endif
+#ifndef PerlIO_clearerr
+PERL_EXPORT_C void PerlIO_clearerr(PerlIO *);
+#endif
+#ifndef PerlIO_getc
+PERL_EXPORT_C int PerlIO_getc(PerlIO *);
+#endif
+#ifndef PerlIO_putc
+PERL_EXPORT_C int PerlIO_putc(PerlIO *, int);
+#endif
+#ifndef PerlIO_ungetc
+PERL_EXPORT_C int PerlIO_ungetc(PerlIO *, int);
+#endif
+#ifndef PerlIO_fdopen
+PERL_EXPORT_C PerlIO *PerlIO_fdopen(int, const char *);
+#endif
+#ifndef PerlIO_importFILE
+PERL_EXPORT_C PerlIO *PerlIO_importFILE(FILE *, const char *);
+#endif
+#ifndef PerlIO_exportFILE
+PERL_EXPORT_C FILE *PerlIO_exportFILE(PerlIO *, const char *);
+#endif
+#ifndef PerlIO_findFILE
+PERL_EXPORT_C FILE *PerlIO_findFILE(PerlIO *);
+#endif
+#ifndef PerlIO_releaseFILE
+PERL_EXPORT_C void PerlIO_releaseFILE(PerlIO *, FILE *);
+#endif
+#ifndef PerlIO_read
+PERL_EXPORT_C SSize_t PerlIO_read(PerlIO *, void *, Size_t);
+#endif
+#ifndef PerlIO_unread
+PERL_EXPORT_C SSize_t PerlIO_unread(PerlIO *, const void *, Size_t);
+#endif
+#ifndef PerlIO_write
+PERL_EXPORT_C SSize_t PerlIO_write(PerlIO *, const void *, Size_t);
+#endif
+#ifndef PerlIO_setlinebuf
+PERL_EXPORT_C void PerlIO_setlinebuf(PerlIO *);
+#endif
+#ifndef PerlIO_printf
+PERL_EXPORT_C int PerlIO_printf(PerlIO *, const char *, ...)
+    __attribute__format__(__printf__, 2, 3);
+#endif
+#ifndef PerlIO_sprintf
+PERL_EXPORT_C int PerlIO_sprintf(char *, int, const char *, ...)
+    __attribute__format__(__printf__, 3, 4);
+#endif
+#ifndef PerlIO_vprintf
+PERL_EXPORT_C int PerlIO_vprintf(PerlIO *, const char *, va_list);
+#endif
+#ifndef PerlIO_tell
+PERL_EXPORT_C Off_t PerlIO_tell(PerlIO *);
+#endif
+#ifndef PerlIO_seek
+PERL_EXPORT_C int PerlIO_seek(PerlIO *, Off_t, int);
+#endif
+#ifndef PerlIO_rewind
+PERL_EXPORT_C void PerlIO_rewind(PerlIO *);
+#endif
+#ifndef PerlIO_has_base
+PERL_EXPORT_C int PerlIO_has_base(PerlIO *);
+#endif
+#ifndef PerlIO_has_cntptr
+PERL_EXPORT_C int PerlIO_has_cntptr(PerlIO *);
+#endif
+#ifndef PerlIO_fast_gets
+PERL_EXPORT_C int PerlIO_fast_gets(PerlIO *);
+#endif
+#ifndef PerlIO_canset_cnt
+PERL_EXPORT_C int PerlIO_canset_cnt(PerlIO *);
+#endif
+#ifndef PerlIO_get_ptr
+PERL_EXPORT_C STDCHAR *PerlIO_get_ptr(PerlIO *);
+#endif
+#ifndef PerlIO_get_cnt
+PERL_EXPORT_C int PerlIO_get_cnt(PerlIO *);
+#endif
+#ifndef PerlIO_set_cnt
+PERL_EXPORT_C void PerlIO_set_cnt(PerlIO *, int);
+#endif
+#ifndef PerlIO_set_ptrcnt
+PERL_EXPORT_C void PerlIO_set_ptrcnt(PerlIO *, STDCHAR *, int);
+#endif
+#ifndef PerlIO_get_base
+PERL_EXPORT_C STDCHAR *PerlIO_get_base(PerlIO *);
+#endif
+#ifndef PerlIO_get_bufsiz
+PERL_EXPORT_C int PerlIO_get_bufsiz(PerlIO *);
+#endif
+#ifndef PerlIO_tmpfile
+PERL_EXPORT_C PerlIO *PerlIO_tmpfile(void);
+#endif
+#ifndef PerlIO_stdin
+PERL_EXPORT_C PerlIO *PerlIO_stdin(void);
+#endif
+#ifndef PerlIO_stdout
+PERL_EXPORT_C PerlIO *PerlIO_stdout(void);
+#endif
+#ifndef PerlIO_stderr
+PERL_EXPORT_C PerlIO *PerlIO_stderr(void);
+#endif
+#ifndef PerlIO_getpos
+PERL_EXPORT_C int PerlIO_getpos(PerlIO *, SV *);
+#endif
+#ifndef PerlIO_setpos
+PERL_EXPORT_C int PerlIO_setpos(PerlIO *, SV *);
+#endif
+#ifndef PerlIO_fdupopen
+PERL_EXPORT_C PerlIO *PerlIO_fdupopen(pTHX_ PerlIO *, CLONE_PARAMS *, int);
+#endif
+#if !defined(PerlIO_modestr) && !defined(PERLIO_IS_STDIO)
+PERL_EXPORT_C char *PerlIO_modestr(PerlIO *, char *buf);
+#endif
+#ifndef PerlIO_isutf8
+PERL_EXPORT_C int PerlIO_isutf8(PerlIO *);
+#endif
+#ifndef PerlIO_apply_layers
+PERL_EXPORT_C int PerlIO_apply_layers(pTHX_ PerlIO *f, const char *mode,
+				      const char *names);
+#endif
+#ifndef PerlIO_binmode
+PERL_EXPORT_C int PerlIO_binmode(pTHX_ PerlIO *f, int iotype, int omode,
+			  	 const char *names);
+#endif
+#ifndef PerlIO_getname
+PERL_EXPORT_C char *PerlIO_getname(PerlIO *, char *);
+#endif
+
+PERL_EXPORT_C void PerlIO_destruct(pTHX);
+
+PERL_EXPORT_C int PerlIO_intmode2str(int rawmode, char *mode, int *writing);
+
+#ifdef PERLIO_LAYERS
+PERL_EXPORT_C void PerlIO_cleanup(pTHX);
+
+PERL_EXPORT_C void PerlIO_debug(const char *fmt, ...)
+    __attribute__format__(__printf__, 1, 2);
+typedef struct PerlIO_list_s PerlIO_list_t;
+
+
+#endif
+
+END_EXTERN_C
+#endif				/* _PERLIO_H */
+
+/*
+ * Local variables:
+ * c-indentation-style: bsd
+ * c-basic-offset: 4
+ * indent-tabs-mode: t
+ * End:
+ *
+ * ex: set ts=8 sts=4 sw=4 noet:
+ */