X-Git-Url: http://git.shadowcat.co.uk/gitweb/gitweb.cgi?a=blobdiff_plain;f=maint%2Ftravis-ci_scripts%2Fcommon.bash;h=f9d8b4a682f9235967e84c1d7f9a644de18751e3;hb=da9346a03a7df80d02f40584422af71fbd2ca4f8;hp=4fb0819fc9543b6abb8f1e1ac46054d4aa1eaf45;hpb=579472dfc78ac84183a7f6b3a99b815e0a90b321;p=dbsrgits%2FDBIx-Class.git

diff --git a/maint/travis-ci_scripts/common.bash b/maint/travis-ci_scripts/common.bash
index 4fb0819..f9d8b4a 100755
--- a/maint/travis-ci_scripts/common.bash
+++ b/maint/travis-ci_scripts/common.bash
@@ -1,8 +1,10 @@
 #!/bin/bash
 
+# "autodie"
 set -e
 
 TEST_STDERR_LOG=/tmp/dbictest.stderr
+TIMEOUT_CMD="/usr/bin/timeout --kill-after=16m --signal=TERM 15m"
 
 echo_err() { echo "$@" 1>&2 ; }
 
@@ -13,20 +15,67 @@ fi
 
 tstamp() { echo -n "[$(date '+%H:%M:%S')]" ; }
 
+ci_vm_state_text() {
+  echo "
+========================== CI System information ============================
+
+= CPUinfo
+$(perl -0777 -p -e 's/.+\n\n(?!\z)//s' < /proc/cpuinfo)
+
+= Meminfo
+$(free -m -t)
+
+= Diskinfo
+$(sudo df -h)
+
+$(mount | grep '^/')
+
+= Kernel info
+$(uname -a)
+
+= Network Configuration
+$(ip addr)
+
+= Network Sockets Status
+$(sudo netstat -an46p | grep -Pv '\s(CLOSING|(FIN|TIME|CLOSE)_WAIT.?|LAST_ACK)\s')
+
+= Processlist
+$(sudo ps fuxa)
+
+= Environment
+$(env | grep -P 'TEST|HARNESS|MAKE|TRAVIS|PERL|DBIC' | LC_ALL=C sort | cat -v)
+
+= Perl in use
+$(perl -V)
+============================================================================="
+}
+
 run_or_err() {
   echo_err -n "$(tstamp) $1 ... "
 
+  LASTCMD="$2"
   LASTEXIT=0
   START_TIME=$SECONDS
-  LASTOUT=$( bash -c "$2" 2>&1 ) || LASTEXIT=$?
+
+  PRMETER_PIDFILE="$(tempfile)_$SECONDS"
+  # the double bash is to hide the job control messages
+  bash -c "bash -c 'echo \$\$ >> $PRMETER_PIDFILE; while true; do sleep 10; echo -n \"\${SECONDS}s ... \"; done' &"
+
+  LASTOUT=$( eval "$2" 2>&1 ) || LASTEXIT=$?
+
+  # stop progress meter
+  for p in $(cat "$PRMETER_PIDFILE"); do kill $p ; done
+
   DELTA_TIME=$(( $SECONDS - $START_TIME ))
 
   if [[ "$LASTEXIT" != "0" ]] ; then
-    echo_err "FAILED !!! (after ${DELTA_TIME}s)"
-    echo_err "Command executed:"
-    echo_err "$2"
-    echo_err "STDOUT+STDERR:"
-    echo_err "$LASTOUT"
+    if [[ -z "$3" ]] ; then
+      echo_err "FAILED !!! (after ${DELTA_TIME}s)"
+      echo_err "Command executed:"
+      echo_err "$LASTCMD"
+      echo_err "STDOUT+STDERR:"
+      echo_err "$LASTOUT"
+    fi
 
     return $LASTEXIT
   else
@@ -34,6 +83,13 @@ run_or_err() {
   fi
 }
 
+apt_install() {
+  # flatten
+  pkgs="$@"
+
+  run_or_err "Installing Debian APT packages: $pkgs" "sudo apt-get install --allow-unauthenticated  --no-install-recommends -y $pkgs"
+}
+
 extract_prereqs() {
   # once --verbose is set, --no-verbose can't disable it
   # do this by hand
@@ -45,7 +101,7 @@ extract_prereqs() {
     || LASTEXIT=$?
 
   OUT=${COMBINED_OUT#*!!!STDERRSTDOUTSEPARATOR!!!}
-  ERR=$(grep -v " is up to date." <<< "${COMBINED_OUT%!!!STDERRSTDOUTSEPARATOR!!!*}")
+  ERR=${COMBINED_OUT%!!!STDERRSTDOUTSEPARATOR!!!*}
 
   if [[ "$LASTEXIT" != "0" ]] ; then
     echo_err "Error occured (exit code $LASTEXIT) retrieving dependencies of $@:"
@@ -54,8 +110,14 @@ extract_prereqs() {
     exit 1
   fi
 
-  # throw away ascii art, convert to modnames
-  PQ=$(perl -p -e 's/^[^a-z]+//i; s/\-[^\-]+$/ /; s/\-/::/g' <<< "$OUT")
+  # throw away warnings, up-to-date diag, ascii art, convert to modnames
+  PQ=$(perl -p -e '
+    s/^.*?is up to date.*$//;
+    s/^\!.*//;
+    s/^[^a-z]+//i;
+    s/\-[^\-]+$/ /; # strip version part
+    s/\-/::/g
+  ' <<< "$OUT")
 
   # throw away what was in $@
   for m in "$@" ; do
@@ -70,12 +132,16 @@ parallel_installdeps_notest() {
   if [[ -z "$@" ]] ; then return; fi
 
   # one module spec per line
-  MODLIST="$(printf '%s\n' "$@")"
+  MODLIST="$(printf '%s\n' "$@" | sort -R)"
 
-  # The reason we do things so "non-interactively" is that xargs -P will have the
-  # latest cpanm instance overwrite the buildlog. There seems to be no way to
-  # specify a custom buildlog, hence we just collect the verbose output
-  # and display it in case of "worker" failure
+  # We want to trap the output of each process and serially append them to
+  # each other as opposed to just dumping a jumbled up mass-log that would
+  # need careful unpicking by a human
+  #
+  # While cpanm does maintain individual buildlogs in more recent versions,
+  # we are not terribly interested in trying to figure out which log is which
+  # dist. The verbose-output + trap STDIO technique is vastly superior in this
+  # particular case
   #
   # Explanation of inline args:
   #
@@ -89,8 +155,8 @@ parallel_installdeps_notest() {
   run_or_err "Installing (without testing) $(echo $MODLIST)" \
     "echo \\
 \"$MODLIST\" \\
-      | xargs -d '\\n' -n 1 -P $NUMTHREADS bash -c \\
-        'OUT=\$(cpanm --notest --no-man-pages \"\$@\" 2>&1 ) || (LASTEXIT=\$?; echo \"\$OUT\"; exit \$LASTEXIT)' \\
+      | xargs -d '\\n' -n 1 -P $VCPU_USE bash -c \\
+        'OUT=\$(maint/getstatus $TIMEOUT_CMD cpanm --notest \"\$@\" 2>&1 ) || (LASTEXIT=\$?; echo \"\$OUT\"; exit \$LASTEXIT)' \\
         'giant space monkey penises'
     "
 }
@@ -98,62 +164,160 @@ parallel_installdeps_notest() {
 installdeps() {
   if [[ -z "$@" ]] ; then return; fi
 
-  echo_err "$(tstamp) Processing dependencies: $@"
+  MODLIST=$(printf "%q " "$@" | perl -pe 's/^\s+|\s+$//g')
 
   local -x HARNESS_OPTIONS
 
-  HARNESS_OPTIONS="j$NUMTHREADS"
+  HARNESS_OPTIONS="j$VCPU_USE"
 
-  echo_err -n "Attempting install of $# modules under parallel ($HARNESS_OPTIONS) testing ... "
+  if ! run_or_err "Attempting install of $# modules under parallel ($HARNESS_OPTIONS) testing ($MODLIST)" "_dep_inst_with_test $MODLIST" quiet_fail ; then
+    local errlog="failed after ${DELTA_TIME}s Exit:$LASTEXIT Log:$(/usr/bin/nopaste -q -s Shadowcat -d "Parallel testfail" <<< "$LASTOUT")"
+    echo "$errlog"
 
-  LASTEXIT=0
-  START_TIME=$SECONDS
-  LASTOUT=$( cpan_inst "$@" ) || LASTEXIT=$?
-  DELTA_TIME=$(( $SECONDS - $START_TIME ))
-
-  if [[ "$LASTEXIT" = "0" ]] ; then
-    echo_err "done (took ${DELTA_TIME}s)"
-  else
-    echo_err -n "failed (Exit:$LASTEXIT Log:$(/usr/bin/nopaste -q -s Shadowcat -d "Parallel installfail" <<< "$LASTOUT")) retrying with sequential testing ... "
+    POSTMORTEM="$POSTMORTEM$(
+      echo
+      echo "Depinstall of $MODLIST under $HARNESS_OPTIONS parallel testing $errlog"
+    )"
 
     HARNESS_OPTIONS=""
-    LASTEXIT=0
-    START_TIME=$SECONDS
-    LASTOUT=$( cpan_inst "$@" ) || LASTEXIT=$?
-    DELTA_TIME=$(( $SECONDS - $START_TIME ))
-
-    if [[ "$LASTEXIT" = "0" ]] ; then
-      echo_err "done (took ${DELTA_TIME}s)"
-    else
-      echo_err "FAILED !!! (after ${DELTA_TIME}s)"
-      echo_err "STDOUT+STDERR:"
-      echo_err "$LASTOUT"
-      exit 1
-    fi
+    run_or_err "Retrying same $# modules without parallel testing" "_dep_inst_with_test $MODLIST"
   fi
 
   INSTALLDEPS_OUT="${INSTALLDEPS_OUT}${LASTOUT}"
 }
 
-cpan_inst() {
-  cpan "$@" 2>&1
+_dep_inst_with_test() {
+  if [[ "$DEVREL_DEPS" == "true" ]] ; then
+    # --dev is already part of CPANM_OPT
+    LASTCMD="$TIMEOUT_CMD cpanm $@"
+    $LASTCMD 2>&1 || return 1
+  else
+    LASTCMD="$TIMEOUT_CMD cpan $@"
+    $LASTCMD 2>&1 || return 1
+
+    # older perls do not have a CPAN which can exit with error on failed install
+    for m in "$@"; do
+      if ! perl -e '
 
-  # older perls do not have a CPAN which can exit with error on failed install
-  for m in "$@"; do
-    if ! perl -e '
+$ARGV[0] =~ s/-TRIAL\.//;
 
-eval ( q{require } . (
-  $ARGV[0] =~ m{ \/ .*? ([^\/]+) $ }x
+my $mod = (
+  # abuse backtrack
+  $ARGV[0] =~ m{ / .*? ( [^/]+ ) $ }x
     ? do { my @p = split (/\-/, $1); pop @p; join "::", @p }
     : $ARGV[0]
-) ) or ( print $@ and exit 1)' "$m" 2> /dev/null ; then
+);
 
-      echo -e "$m installation seems to have failed"
-      return 1
-    fi
-  done
+# map some install-names to a module/version combo
+# serves both as a grandfathered title-less tarball, and
+# as a minimum version check for upgraded core modules
+my $eval_map = {
+
+  # this is temporary, will need something more robust down the road
+  # (perhaps by then Module::CoreList will be dep-free)
+  "Module::Build" => { ver => "0.4214" },
+
+  "File::Spec" => { ver => "3.47" },
+  "Cwd" => { ver => "3.47" },
+
+  "List::Util" => { ver => "1.42" },
+  "Scalar::Util" => { ver => "1.42" },
+  "Scalar::List::Utils" => { mod => "List::Util", ver => "1.42" },
+};
+
+eval(
+  "require "
+
+  .
+
+  ( $eval_map->{$mod}{mod} || $mod )
+
+  .
+
+  ($eval_map->{$mod}{ver}
+    ? "; $mod->VERSION(\$eval_map->{\$mod}{ver}) "
+    : ""
+  )
+
+  .
+
+  "; 1"
+)
+  or
+( print $@ and exit 1)
+
+      ' "$m" 2> /dev/null ; then
+        echo -e "$m installation seems to have failed"
+        return 1
+      fi
+    done
+  fi
 }
 
+# Idea stolen from
+# https://github.com/kentfredric/Dist-Zilla-Plugin-Prereqs-MatchInstalled-All/blob/master/maint-travis-ci/sterilize_env.pl
+# Only works on 5.12+ (where sitelib was finally properly fixed)
+purge_sitelib() {
+  echo_err "$(tstamp) Sterilizing the Perl installation (cleaning up sitelib)"
+
+  if perl -M5.012 -e1 &>/dev/null ; then
+
+    perl -M5.012 -MConfig -MFile::Find -e '
+      my $sitedirs = {
+        map { $Config{$_} => 1 }
+          grep { $_ =~ /site(lib|arch)exp$/ }
+            keys %Config
+      };
+      find({ bydepth => 1, no_chdir => 1, follow_fast => 1, wanted => sub {
+        ! $sitedirs->{$_} and ( -d _ ? rmdir : unlink )
+      } }, keys %$sitedirs )
+    '
+  else
+
+    cl_fn="/tmp/${TRAVIS_BUILD_ID}_Module_CoreList.pm";
+
+    [[ -s "$cl_fn" ]] || run_or_err \
+      "Downloading latest Module::CoreList" \
+      "curl -s --compress -o '$cl_fn' https://api.metacpan.org/source/Module::CoreList"
+
+    perl -0777 -Ilib -MDBIx::Class::Optional::Dependencies -e '
+
+      # this is horrible, but really all we want is "has this ever been used"
+      # so a grep without a load is quite legit (and horrible)
+      my $mcl_source = <>;
+
+      my @all_possible_never_been_core_modpaths = map
+        { (my $mp = $_ . ".pm" ) =~ s|::|/|g; $mp }
+        grep
+          { $mcl_source !~ / ^ \s+ \x27 $_ \x27 \s* \=\> /mx }
+          (
+            qw(
+              Module::Build::Tiny
+            ),
+            keys %{ DBIx::Class::Optional::Dependencies->modreq_list_for([
+              keys %{ DBIx::Class::Optional::Dependencies->req_group_list }
+            ])}
+          )
+      ;
+
+      # now that we have the list we can go ahead and destroy every single one
+      # of these modules without being concerned about breaking the base ability
+      # to install things
+      for my $mp ( sort { lc($a) cmp lc($b) } @all_possible_never_been_core_modpaths ) {
+        for my $incdir (@INC) {
+          -e "$incdir/$mp"
+            and
+          unlink "$incdir/$mp"
+            and
+          print "Nuking $incdir/$mp\n"
+        }
+      }
+    ' "$cl_fn"
+
+  fi
+}
+
+
 CPAN_is_sane() { perl -MCPAN\ 1.94_56 -e 1 &>/dev/null ; }
 
 CPAN_supports_BUILDPL() { perl -MCPAN\ 1.9205 -e1 &>/dev/null; }