X-Git-Url: http://git.shadowcat.co.uk/gitweb/gitweb.cgi?a=blobdiff_plain;f=hints%2Flinux.sh;h=bd6afd29f5098db24d3bc442fa04e1028e97e4fb;hb=2440f57eb96c4329967f5d7bc390ffabf1449b9c;hp=bbd88be00a11bf7c1a61b02dc59f8482eea849cf;hpb=3d413b553d18ab36ed52354b6154662b48ef9648;p=p5sagit%2Fp5-mst-13.2.git diff --git a/hints/linux.sh b/hints/linux.sh index bbd88be..bd6afd2 100644 --- a/hints/linux.sh +++ b/hints/linux.sh @@ -6,11 +6,11 @@ # Additional info from Nigel Head # and Kenneth Albanowski # -# Consolidated by Andy Dougherty +# Consolidated by Andy Dougherty # # Updated Thu Feb 8 11:56:10 EST 1996 -# Updated Thu May 30 10:50:22 EDT 1996 by +# Updated Thu May 30 10:50:22 EDT 1996 by # Updated Fri Jun 21 11:07:54 EDT 1996 # NDBM support for ELF renabled by @@ -39,47 +39,17 @@ d_suidsafe='undef' # do the implicit mapping. ignore_versioned_solibs='y' -# perl goes into the /usr tree. See the Filesystem Standard -# available via anonymous FTP at tsx-11.mit.edu in -# /pub/linux/docs/linux-standards/fsstnd. -# Allow a command line override, e.g. Configure -Dprefix=/foo/bar -# -# Addendum for 5.005_57 and beyond: -# -# However, most Linux users probably already have a /usr/bin/perl. -# We can't know whether the current user is intending to *replace* -# that /usr/bin/perl or whether the user is intending to install -# a *different* installation. -# -# Here is what we used to do: -# Allow a command line override, e.g. Configure -Dprefix=/foo/bar -# case "$prefix" in -# '') prefix='/usr' ;; -# esac -# -# For now, let's assume that most Linux users get their /usr/bin/perl -# from some packaging system, so that those compiling from source are -# probably the more experimental folks and hence probably aren't -# intending to replace /usr/bin/perl (at least just yet). -# This change makes linux consistent with most other unix platforms -# in having a default of prefix=/usr/local. -# These notes can probably safely be removed in 5.005_50 and beyond. -# -# 9 April 1999 Andy Dougherty -# - -# BSD compatability library no longer needed -# 'kaffe' has a /usr/lib/libnet.so which is not at all relevent for perl. -set `echo X "$libswanted "| sed -e 's/ bsd / /' -e 's/ net / /'` +# BSD compatibility library no longer needed +# 'kaffe' has a /usr/lib/libnet.so which is not at all relevant for perl. +# bind causes issues with several reentrant functions +set `echo X "$libswanted "| sed -e 's/ bsd / /' -e 's/ net / /' -e 's/ bind / /'` shift libswanted="$*" # If you have glibc, then report the version for ./myconfig bug reporting. # (Configure doesn't need to know the specific version since it just uses # gcc to load the library for all tests.) -# Is this sufficiently robust for libc5 systems as well as -# glibc-2.1.x systems? -# We don't use __GLIBC__ and __GLIBC_MINOR__ because they +# We don't use __GLIBC__ and __GLIBC_MINOR__ because they # are insufficiently precise to distinguish things like # libc-2.0.6 and libc-2.0.7. if test -L /lib/libc.so.6; then @@ -91,13 +61,68 @@ fi # function in . d_lstat=define -# Explanation? +# malloc wrap works +case "$usemallocwrap" in +'') usemallocwrap='define' ;; +esac + +# The system malloc() is about as fast and as frugal as perl's. +# Since the system malloc() has been the default since at least +# 5.001, we might as well leave it that way. --AD 10 Jan 2002 case "$usemymalloc" in '') usemymalloc='n' ;; esac +# Check if we're about to use Intel's ICC compiler +case "`${cc:-cc} -V 2>&1`" in +*"Intel(R) C++ Compiler"*|*"Intel(R) C Compiler"*) + # This is needed for Configure's prototype checks to work correctly + # The -mp flag is needed to pass various floating point related tests + # The -no-gcc flag is needed otherwise, icc pretends (poorly) to be gcc + ccflags="-we147 -mp -no-gcc $ccflags" + # If we're using ICC, we usually want the best performance + case "$optimize" in + '') optimize='-O3' ;; + esac + ;; +*"Sun C"*) + optimize='-xO2' + cccdlflags='-KPIC' + lddlflags='-G -Bdynamic' + # Sun C doesn't support gcc attributes, but, in many cases, doesn't + # complain either. Not all cases, though. + d_attribute_format='undef' + d_attribute_malloc='undef' + d_attribute_nonnull='undef' + d_attribute_noreturn='undef' + d_attribute_pure='undef' + d_attribute_unused='undef' + d_attribute_warn_unused_result='undef' + ;; +esac + case "$optimize" in -'') optimize='-O2' ;; +# use -O2 by default ; -O3 doesn't seem to bring significant benefits with gcc +'') + optimize='-O2' + case "`uname -m`" in + ppc*) + # on ppc, it seems that gcc (at least gcc 3.3.2) isn't happy + # with -O2 ; so downgrade to -O1. + optimize='-O1' + ;; + ia64*) + # This architecture has had various problems with gcc's + # in the 3.2, 3.3, and 3.4 releases when optimized to -O2. See + # RT #37156 for a discussion of the problem. + case "`${cc:-gcc} -v 2>&1`" in + *"version 3.2"*|*"version 3.3"*|*"version 3.4"*) + ccflags="-fno-delete-null-pointer-checks $ccflags" + ;; + esac + ;; + esac + ;; esac # Are we using ELF? Thanks to Kenneth Albanowski @@ -106,6 +131,7 @@ cat >try.c <<'EOM' /* Test for whether ELF binaries are produced */ #include #include +#include main() { char buffer[4]; int i=open("a.out",O_RDONLY); @@ -126,10 +152,6 @@ You appear to have ELF support. I'll try to use it for dynamic loading. If dynamic loading doesn't work, read hints/linux.sh for further information. EOM -#For RedHat Linux 3.0.3, you may need to fetch -# ftp://ftp.redhat.com/pub/redhat-3.0.3/i386/updates/RPMS/ld.so-1.7.14-3.i386.rpm -# - else cat <<'EOM' >&4 @@ -155,8 +177,8 @@ EOM #so='none' # In addition, on some systems there is a problem with perl and NDBM - # which causes AnyDBM and NDBM_File to lock up. This is evidenced - # in the tests as AnyDBM just freezing. Apparently, this only + # which causes AnyDBM and NDBM_File to lock up. This is evidenced + # in the tests as AnyDBM just freezing. Apparently, this only # happens on a.out systems, so we disable NDBM for all a.out linux # systems. If someone can suggest a more robust test # that would be appreciated. @@ -169,7 +191,7 @@ EOM # just as advertised. Checking into it, I found that the lockup was # during the call to dbm_open. Not *in* dbm_open -- but between the call # to and the jump into. - # + # # To make a long story short, making sure that the *.a and *.sa pairs of # /usr/lib/lib{m,db,gdbm}.{a,sa} # were perfectly in sync took care of it. @@ -239,13 +261,13 @@ fi # Shimpei Yamashita # Message-Id: <33EF1634.B36B6500@pobox.com> -# +# # The DR2 of MkLinux (osname=linux,archname=ppc-linux) may need # special flags passed in order for dynamic loading to work. # instead of the recommended: # # ccdlflags='-rdynamic' -# +# # it should be: # ccdlflags='-Wl,-E' # @@ -256,30 +278,64 @@ fi #'osfmach3ppc') ccdlflags='-Wl,-E' ;; #esac -case "`uname -r`" in -sparc-linux) +case "`uname -m`" in +sparc*) case "$cccdlflags" in *-fpic*) cccdlflags="`echo $cccdlflags|sed 's/-fpic/-fPIC/'`" ;; + *-fPIC*) ;; *) cccdlflags="$cccdlflags -fPIC" ;; esac ;; esac -# This script UU/usethreads.cbu will get 'called-back' by Configure +# SuSE8.2 has /usr/lib/libndbm* which are ld scripts rather than +# true libraries. The scripts cause binding against static +# version of -lgdbm which is a bad idea. So if we have 'nm' +# make sure it can read the file +# NI-S 2003/08/07 +if [ -r /usr/lib/libndbm.so -a -x /usr/bin/nm ] ; then + if /usr/bin/nm /usr/lib/libndbm.so >/dev/null 2>&1 ; then + echo 'Your shared -lndbm seems to be a real library.' + else + echo 'Your shared -lndbm is not a real library.' + set `echo X "$libswanted "| sed -e 's/ ndbm / /'` + shift + libswanted="$*" + fi +fi + + +# This script UU/usethreads.cbu will get 'called-back' by Configure # after it has prompted the user for whether to use threads. cat > UU/usethreads.cbu <<'EOCBU' case "$usethreads" in $define|true|[yY]*) - ccflags="-D_REENTRANT $ccflags" - set `echo X "$libswanted "| sed -e 's/ c / pthread c /'` - shift - libswanted="$*" + ccflags="-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS $ccflags" + if echo $libswanted | grep -v pthread >/dev/null + then + set `echo X "$libswanted "| sed -e 's/ c / pthread c /'` + shift + libswanted="$*" + fi + + # Somehow at least in Debian 2.2 these manage to escape + # the #define forest of and so that + # the hasproto macro of Configure doesn't see these protos, + # even with the -D_GNU_SOURCE. + + d_asctime_r_proto="$define" + d_crypt_r_proto="$define" + d_ctime_r_proto="$define" + d_gmtime_r_proto="$define" + d_localtime_r_proto="$define" + d_random_r_proto="$define" + ;; esac EOCBU cat > UU/uselargefiles.cbu <<'EOCBU' -# This script UU/uselargefiles.cbu will get 'called-back' by Configure +# This script UU/uselargefiles.cbu will get 'called-back' by Configure # after it has prompted the user for whether to use large files. case "$uselargefiles" in ''|$define|true|[yY]*) @@ -290,3 +346,66 @@ ccflags_uselargefiles="-D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64" ;; esac EOCBU + +# Purify fails to link Perl if a "-lc" is passed into its linker +# due to duplicate symbols. +case "$PURIFY" in +$define|true|[yY]*) + set `echo X "$libswanted "| sed -e 's/ c / /'` + shift + libswanted="$*" + ;; +esac + +# If we are using g++ we must use nm and force ourselves to use +# the /usr/lib/libc.a (resetting the libc below to an empty string +# makes Configure to look for the right one) because the symbol +# scanning tricks of Configure will crash and burn horribly. +case "$cc" in +*g++*) usenm=true + libc='' + ;; +esac + +# If using g++, the Configure scan for dlopen() and (especially) +# dlerror() might fail, easier just to forcibly hint them in. +case "$cc" in +*g++*) + d_dlopen='define' + d_dlerror='define' + ;; +esac + +# Under some circumstances libdb can get built in such a way as to +# need pthread explicitly linked. + +libdb_needs_pthread="N" + +if echo " $libswanted " | grep -v " pthread " >/dev/null +then + if echo " $libswanted " | grep " db " >/dev/null + then + for DBDIR in $glibpth + do + DBLIB="$DBDIR/libdb.so" + if [ -f $DBLIB ] + then + if nm -u $DBLIB | grep pthread >/dev/null + then + if ldd $DBLIB | grep pthread >/dev/null + then + libdb_needs_pthread="N" + else + libdb_needs_pthread="Y" + fi + fi + fi + done + fi +fi + +case "$libdb_needs_pthread" in + "Y") + libswanted="$libswanted pthread" + ;; +esac