X-Git-Url: http://git.shadowcat.co.uk/gitweb/gitweb.cgi?a=blobdiff_plain;f=hints%2Flinux.sh;h=2ed31dbef385675f62e28f1604c6cb4355cf272f;hb=38cabd2daffcdb193c3134c3eb36b7ceaa4ca051;hp=cde47b1cb97b7c07b1bb40084bb52368b4a0dd7d;hpb=94b6baf514e11d40f0215cb928074cb7980c3082;p=p5sagit%2Fp5-mst-13.2.git diff --git a/hints/linux.sh b/hints/linux.sh index cde47b1..2ed31db 100644 --- a/hints/linux.sh +++ b/hints/linux.sh @@ -1,43 +1,317 @@ # hints/linux.sh # Original version by rsanders -# Additional dlext support by Kenneth Albanowski +# Additional support by Kenneth Albanowski # -# First pass at ELF support by Andy Dougherty -# Fri Feb 3 14:05:00 EST 1995 -# Use sh Configure -Dcc=gcc-elf to try using gcc-elf. It might work. +# ELF support by H.J. Lu +# Additional info from Nigel Head +# and Kenneth Albanowski # +# Consolidated by Andy Dougherty +# +# Updated Thu Feb 8 11:56:10 EST 1996 -ccflags='-I/usr/include/bsd' -cppflags=' -I/usr/include/bsd' -d_dosuid='define' +# Updated Thu May 30 10:50:22 EDT 1996 by -malloctype='void *' -usemymalloc='n' +# Updated Fri Jun 21 11:07:54 EDT 1996 +# NDBM support for ELF renabled by -case "$optimize" in -'') optimize='-O2' ;; +# No version of Linux supports setuid scripts. +d_suidsafe='undef' + +# Debian and Red Hat, and perhaps other vendors, provide both runtime and +# development packages for some libraries. The runtime packages contain shared +# libraries with version information in their names (e.g., libgdbm.so.1.7.3); +# the development packages supplement this with versionless shared libraries +# (e.g., libgdbm.so). +# +# If you want to link against such a library, you must install the development +# version of the package. +# +# These packages use a -dev naming convention in both Debian and Red Hat: +# libgdbmg1 (non-development version of GNU libc 2-linked GDBM library) +# libgdbmg1-dev (development version of GNU libc 2-linked GDBM library) +# So make sure that for any libraries you wish to link Perl with under +# Debian or Red Hat you have the -dev packages installed. +# +# Some operating systems (e.g., Solaris 2.6) will link to a versioned shared +# library implicitly. For example, on Solaris, `ld foo.o -lgdbm' will find an +# appropriate version of libgdbm, if one is available; Linux, however, doesn't +# do the implicit mapping. +ignore_versioned_solibs='y' + +# BSD compatibility library no longer needed +# 'kaffe' has a /usr/lib/libnet.so which is not at all relevant for perl. +# bind causes issues with several reentrant functions +set `echo X "$libswanted "| sed -e 's/ bsd / /' -e 's/ net / /' -e 's/ bind / /'` +shift +libswanted="$*" + +# If you have glibc, then report the version for ./myconfig bug reporting. +# (Configure doesn't need to know the specific version since it just uses +# gcc to load the library for all tests.) +# We don't use __GLIBC__ and __GLIBC_MINOR__ because they +# are insufficiently precise to distinguish things like +# libc-2.0.6 and libc-2.0.7. +if test -L /lib/libc.so.6; then + libc=`ls -l /lib/libc.so.6 | awk '{print $NF}'` + libc=/lib/$libc +fi + +# Configure may fail to find lstat() since it's a static/inline +# function in . +d_lstat=define + +# malloc wrap works +case "$usemallocwrap" in +'') usemallocwrap='define' ;; esac -case "$cc" in -*cc-elf*) - so='so' - dlext='so' - # Configure might not understand nm output for ELF. - usenm=false +# The system malloc() is about as fast and as frugal as perl's. +# Since the system malloc() has been the default since at least +# 5.001, we might as well leave it that way. --AD 10 Jan 2002 +case "$usemymalloc" in +'') usemymalloc='n' ;; +esac + +# Check if we're about to use Intel's ICC compiler +case "`${cc:-cc} -V 2>&1`" in +*"Intel(R) C++ Compiler"*) + # This is needed for Configure's prototype checks to work correctly + ccflags="-we147 $ccflags" + # If we're using ICC, we usually want the best performance + case "$optimize" in + '') optimize='-O3' ;; + esac ;; -*) - lddlflags='-r' +esac + +case "$optimize" in +# use -O2 by default ; -O3 doesn't seem to bring significant benefits with gcc +'') + optimize='-O2' + case "`uname -m`" in + ppc*) + # on ppc, it seems that gcc (at least gcc 3.3.2) isn't happy + # with -O2 ; so downgrade to -O1. + optimize='-O1' + ;; + esac + ;; +esac + +# Are we using ELF? Thanks to Kenneth Albanowski +# for this test. +cat >try.c <<'EOM' +/* Test for whether ELF binaries are produced */ +#include +#include +main() { + char buffer[4]; + int i=open("a.out",O_RDONLY); + if(i==-1) + exit(1); /* fail */ + if(read(i,&buffer[0],4)<4) + exit(1); /* fail */ + if(buffer[0] != 127 || buffer[1] != 'E' || + buffer[2] != 'L' || buffer[3] != 'F') + exit(1); /* fail */ + exit(0); /* succeed (yes, it's ELF) */ +} +EOM +if ${cc:-gcc} try.c >/dev/null 2>&1 && $run ./a.out; then + cat <<'EOM' >&4 + +You appear to have ELF support. I'll try to use it for dynamic loading. +If dynamic loading doesn't work, read hints/linux.sh for further information. +EOM + +else + cat <<'EOM' >&4 + +You don't have an ELF gcc. I will use dld if possible. If you are +using a version of DLD earlier than 3.2.6, or don't have it at all, you +should probably upgrade. If you are forced to use 3.2.4, you should +uncomment a couple of lines in hints/linux.sh and restart Configure so +that shared libraries will be disallowed. + +EOM + lddlflags="-r $lddlflags" + # These empty values are so that Configure doesn't put in the + # Linux ELF values. + ccdlflags=' ' + cccdlflags=' ' + ccflags="-DOVR_DBL_DIG=14 $ccflags" so='sa' dlext='o' + nm_so_opt=' ' ## If you are using DLD 3.2.4 which does not support shared libs, ## uncomment the next two lines: #ldflags="-static" #so='none' - ;; -esac -cat < + # + # I tried compiling with DBM support and sure enough things locked up + # just as advertised. Checking into it, I found that the lockup was + # during the call to dbm_open. Not *in* dbm_open -- but between the call + # to and the jump into. + # + # To make a long story short, making sure that the *.a and *.sa pairs of + # /usr/lib/lib{m,db,gdbm}.{a,sa} + # were perfectly in sync took care of it. + # + # This will generate a harmless Whoa There! message + case "$d_dbm_open" in + '') cat <<'EOM' >&4 -You should take a look at hints/linux.sh. There are a some lines you -may wish to change near the bottom. +Disabling ndbm. This will generate a Whoa There message in Configure. +Read hints/linux.sh for further information. EOM + # You can override this with Configure -Dd_dbm_open + d_dbm_open=undef + ;; + esac +fi + +rm -f try.c a.out + +if /bin/sh -c exit; then + echo '' + echo 'You appear to have a working bash. Good.' +else + cat << 'EOM' >&4 + +*********************** Warning! ********************* +It would appear you have a defective bash shell installed. This is likely to +give you a failure of op/exec test #5 during the test phase of the build, +Upgrading to a recent version (1.14.4 or later) should fix the problem. +****************************************************** +EOM + +fi + +# On SPARClinux, +# The following csh consistently coredumped in the test directory +# "/home/mikedlr/perl5.003_94/t", though not most other directories. + +#Name : csh Distribution: Red Hat Linux (Rembrandt) +#Version : 5.2.6 Vendor: Red Hat Software +#Release : 3 Build Date: Fri May 24 19:42:14 1996 +#Install date: Thu Jul 11 16:20:14 1996 Build Host: itchy.redhat.com +#Group : Shells Source RPM: csh-5.2.6-3.src.rpm +#Size : 184417 +#Description : BSD c-shell + +# For this reason I suggest using the much bug-fixed tcsh for globbing +# where available. + +# November 2001: That warning's pretty old now and probably not so +# relevant, especially since perl now uses File::Glob for globbing. +# We'll still look for tcsh, but tone down the warnings. +# Andy Dougherty, Nov. 6, 2001 +if $csh -c 'echo $version' >/dev/null 2>&1; then + echo 'Your csh is really tcsh. Good.' +else + if xxx=`./UU/loc tcsh blurfl $pth`; $test -f "$xxx"; then + echo "Found tcsh. I'll use it for globbing." + # We can't change Configure's setting of $csh, due to the way + # Configure handles $d_portable and commands found in $loclist. + # We can set the value for CSH in config.h by setting full_csh. + full_csh=$xxx + elif [ -f "$csh" ]; then + echo "Couldn't find tcsh. Csh-based globbing might be broken." + fi +fi + +# Shimpei Yamashita +# Message-Id: <33EF1634.B36B6500@pobox.com> +# +# The DR2 of MkLinux (osname=linux,archname=ppc-linux) may need +# special flags passed in order for dynamic loading to work. +# instead of the recommended: +# +# ccdlflags='-rdynamic' +# +# it should be: +# ccdlflags='-Wl,-E' +# +# So if your DR2 (DR3 came out summer 1998, consider upgrading) +# has problems with dynamic loading, uncomment the +# following three lines, make distclean, and re-Configure: +#case "`uname -r | sed 's/^[0-9.-]*//'``arch`" in +#'osfmach3ppc') ccdlflags='-Wl,-E' ;; +#esac + +case "`uname -m`" in +sparc*) + case "$cccdlflags" in + *-fpic*) cccdlflags="`echo $cccdlflags|sed 's/-fpic/-fPIC/'`" ;; + *) cccdlflags="$cccdlflags -fPIC" ;; + esac + ;; +esac + +# SuSE8.2 has /usr/lib/libndbm* which are ld scripts rather than +# true libraries. The scripts cause binding against static +# version of -lgdbm which is a bad idea. So if we have 'nm' +# make sure it can read the file +# NI-S 2003/08/07 +if [ -r /usr/lib/libndbm.so -a -x /usr/bin/nm ] ; then + if /usr/bin/nm /usr/lib/libndbm.so >/dev/null 2>&1 ; then + echo 'Your shared -lndbm seems to be a real library.' + else + echo 'Your shared -lndbm is not a real library.' + set `echo X "$libswanted "| sed -e 's/ ndbm / /'` + shift + libswanted="$*" + fi +fi + + +# This script UU/usethreads.cbu will get 'called-back' by Configure +# after it has prompted the user for whether to use threads. +cat > UU/usethreads.cbu <<'EOCBU' +case "$usethreads" in +$define|true|[yY]*) + ccflags="-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS $ccflags" + set `echo X "$libswanted "| sed -e 's/ c / pthread c /'` + shift + libswanted="$*" + + # Somehow at least in Debian 2.2 these manage to escape + # the #define forest of and so that + # the hasproto macro of Configure doesn't see these protos, + # even with the -D_GNU_SOURCE. + + d_asctime_r_proto="$define" + d_crypt_r_proto="$define" + d_ctime_r_proto="$define" + d_gmtime_r_proto="$define" + d_localtime_r_proto="$define" + d_random_r_proto="$define" + + ;; +esac +EOCBU + +cat > UU/uselargefiles.cbu <<'EOCBU' +# This script UU/uselargefiles.cbu will get 'called-back' by Configure +# after it has prompted the user for whether to use large files. +case "$uselargefiles" in +''|$define|true|[yY]*) +# Keep this in the left margin. +ccflags_uselargefiles="-D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64" + + ccflags="$ccflags $ccflags_uselargefiles" + ;; +esac +EOCBU