X-Git-Url: http://git.shadowcat.co.uk/gitweb/gitweb.cgi?a=blobdiff_plain;f=config_h.SH;h=cae08f30dd4b3bc3280137038568c904f03cac54;hb=526fdc24ad2c51ba7f2a58c871a45d948bdfe8e3;hp=1a7c363ff20e3ab7828f36341d1a0a30c69b80e2;hpb=20ce7b12268a3d32b5b246928de5084322e709cf;p=p5sagit%2Fp5-mst-13.2.git diff --git a/config_h.SH b/config_h.SH index 1a7c363..cae08f3 100644 --- a/config_h.SH +++ b/config_h.SH @@ -44,17 +44,6 @@ sed <config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un- */ #define LOC_SED "$full_sed" /**/ -/* BIN: - * This symbol holds the path of the bin directory where the package will - * be installed. Program must be prepared to deal with ~name substitution. - */ -/* BIN_EXP: - * This symbol is the filename expanded version of the BIN symbol, for - * programs that do not want to deal with that at run-time. - */ -#define BIN "$bin" /**/ -#define BIN_EXP "$binexp" /**/ - /* HAS_ALARM: * This symbol, if defined, indicates that the alarm routine is * available. @@ -595,7 +584,7 @@ sed <config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un- /* HAS_SHMAT_PROTOTYPE: * This symbol, if defined, indicates that the sys/shm.h includes * a prototype for shmat(). Otherwise, it is up to the program to - * guess one. Shmat_t shmat (int, Shmat_t, int) is a good guess, + * guess one. Shmat_t shmat _((int, Shmat_t, int)) is a good guess, * but not always right so it should be emitted by the program only * when HAS_SHMAT_PROTOTYPE is not defined to avoid conflicting defs. */ @@ -1021,30 +1010,6 @@ sed <config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un- */ #define STDCHAR $stdchar /**/ -/* HAS_ACCESSX: - * This symbol, if defined, indicates that the accessx routine is - * available to do extended access checks. - */ -#$d_accessx HAS_ACCESSX /**/ - -/* HAS_EACCESS: - * This symbol, if defined, indicates that the eaccess routine is - * available to do extended access checks. - */ -#$d_eaccess HAS_EACCESS /**/ - -/* I_SYS_ACCESS: - * This symbol, if defined, indicates to the C program that it should - * include . - */ -#$i_sysaccess I_SYS_ACCESS /**/ - -/* I_SYS_SECURITY: - * This symbol, if defined, indicates to the C program that it should - * include . - */ -#$i_syssecrt I_SYS_SECURITY /**/ - /* CROSSCOMPILE: * This symbol, if defined, signifies that we our * build process is a cross-compilation. @@ -1076,10 +1041,57 @@ sed <config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un- */ #$multiarch MULTIARCH /**/ +/* HAS_QUAD: + * This symbol, if defined, tells that there's a 64-bit integer type, + * Quad_t, and its unsigned counterpar, Uquad_t. QUADKIND will be one + * of QUAD_IS_INT, QUAD_IS_LONG, QUAD_IS_LONG_LONG, or QUAD_IS_INT64_T. + */ +#$d_quad HAS_QUAD /**/ +#ifdef HAS_QUAD +# define Quad_t $quadtype /**/ +# define Uquad_t $uquadtype /**/ +# define QUADKIND $quadkind /**/ +# define QUAD_IS_INT 1 +# define QUAD_IS_LONG 2 +# define QUAD_IS_LONG_LONG 3 +# define QUAD_IS_INT64_T 4 +#endif + +/* HAS_ACCESSX: + * This symbol, if defined, indicates that the accessx routine is + * available to do extended access checks. + */ +#$d_accessx HAS_ACCESSX /**/ + +/* HAS_EACCESS: + * This symbol, if defined, indicates that the eaccess routine is + * available to do extended access checks. + */ +#$d_eaccess HAS_EACCESS /**/ + +/* I_SYS_ACCESS: + * This symbol, if defined, indicates to the C program that it should + * include . + */ +#$i_sysaccess I_SYS_ACCESS /**/ + +/* I_SYS_SECURITY: + * This symbol, if defined, indicates to the C program that it should + * include . + */ +#$i_syssecrt I_SYS_SECURITY /**/ + +/* OSNAME: + * This symbol contains the name of the operating system, as determined + * by Configure. You shouldn't rely on it too much; the specific + * feature tests from Configure are generally more reliable. + */ +#define OSNAME "$osname" /**/ + /* MEM_ALIGNBYTES: * This symbol contains the number of bytes required to align a - * double. Usual values are 2, 4 and 8. The default is eight, - * for safety. + * double, or a long double when applicable. Usual values are 2, + * 4 and 8. The default is eight, for safety. */ #if defined(CROSSCOMPILE) || defined(MULTIARCH) # define MEM_ALIGNBYTES 8 @@ -1087,6 +1099,61 @@ sed <config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un- #define MEM_ALIGNBYTES $alignbytes #endif +/* ARCHLIB: + * This variable, if defined, holds the name of the directory in + * which the user wants to put architecture-dependent public + * library files for $package. It is most often a local directory + * such as /usr/local/lib. Programs using this variable must be + * prepared to deal with filename expansion. If ARCHLIB is the + * same as PRIVLIB, it is not defined, since presumably the + * program already searches PRIVLIB. + */ +/* ARCHLIB_EXP: + * This symbol contains the ~name expanded version of ARCHLIB, to be used + * in programs that are not prepared to deal with ~ expansion at run-time. + */ +#$d_archlib ARCHLIB "$archlib" /**/ +#$d_archlib ARCHLIB_EXP "$archlibexp" /**/ + +/* ARCHNAME: + * This symbol holds a string representing the architecture name. + * It may be used to construct an architecture-dependant pathname + * where library files may be held under a private library, for + * instance. + */ +#define ARCHNAME "$archname" /**/ + +/* HAS_ATOLF: + * This symbol, if defined, indicates that the atolf routine is + * available to convert strings into long doubles. + */ +#$d_atolf HAS_ATOLF /**/ + +/* HAS_ATOLL: + * This symbol, if defined, indicates that the atoll routine is + * available to convert strings into long longs. + */ +#$d_atoll HAS_ATOLL /**/ + +/* BIN: + * This symbol holds the path of the bin directory where the package will + * be installed. Program must be prepared to deal with ~name substitution. + */ +/* BIN_EXP: + * This symbol is the filename expanded version of the BIN symbol, for + * programs that do not want to deal with that at run-time. + */ +#define BIN "$bin" /**/ +#define BIN_EXP "$binexp" /**/ + +/* PERL_BINCOMPAT_5005: + * This symbol, if defined, indicates that Perl 5.006 should be + * binary-compatible with Perl 5.005. This is impossible for builds + * that use features like threads and multiplicity it is always $undef + * for those versions. + */ +#$d_bincompat5005 PERL_BINCOMPAT_5005 /**/ + /* BYTEORDER: * This symbol holds the hexadecimal constant defined in byteorder, * i.e. 0x1234 or 0x4321, etc... @@ -1130,6 +1197,67 @@ sed <config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un- #define BYTEORDER 0x$byteorder /* large digits for MSB */ #endif /* NeXT */ +/* CAT2: + * This macro catenates 2 tokens together. + */ +/* STRINGIFY: + * This macro surrounds its token with double quotes. + */ +#if $cpp_stuff == 1 +# define CAT2(a,b) a/**/b +# define STRINGIFY(a) "a" + /* If you can get stringification with catify, tell me how! */ +#endif +#if $cpp_stuff == 42 +# define PeRl_CaTiFy(a, b) a ## b +# define PeRl_StGiFy(a) #a +/* the additional level of indirection enables these macros to be + * used as arguments to other macros. See K&R 2nd ed., page 231. */ +# define CAT2(a,b) PeRl_CaTiFy(a,b) +# define StGiFy(a) PeRl_StGiFy(a) +# define STRINGIFY(a) PeRl_StGiFy(a) +#endif +#if $cpp_stuff != 1 && $cpp_stuff != 42 +#include "Bletch: How does this C preprocessor catenate tokens?" +#endif + +/* CPPSTDIN: + * This symbol contains the first part of the string which will invoke + * the C preprocessor on the standard input and produce to standard + * output. Typical value of "cc -E" or "/lib/cpp", but it can also + * call a wrapper. See CPPRUN. + */ +/* CPPMINUS: + * This symbol contains the second part of the string which will invoke + * the C preprocessor on the standard input and produce to standard + * output. This symbol will have the value "-" if CPPSTDIN needs a minus + * to specify standard input, otherwise the value is "". + */ +/* CPPRUN: + * This symbol contains the string which will invoke a C preprocessor on + * the standard input and produce to standard output. It needs to end + * with CPPLAST, after all other preprocessor flags have been specified. + * The main difference with CPPSTDIN is that this program will never be a + * pointer to a shell wrapper, i.e. it will be empty if no preprocessor is + * available directly to the user. Note that it may well be different from + * the preprocessor used to compile the C program. + */ +/* CPPLAST: + * This symbol is intended to be used along with CPPRUN in the same manner + * symbol CPPMINUS is used with CPPSTDIN. It contains either "-" or "". + */ +#define CPPSTDIN "$cppstdin" +#define CPPMINUS "$cppminus" +#define CPPRUN "$cpprun" +#define CPPLAST "$cpplast" + +/* HAS_ACCESS: + * This manifest constant lets the C program know that the access() + * system call is available to check for accessibility using real UID/GID. + * (always present on UNIX.) + */ +#$d_access HAS_ACCESS /**/ + /* CASTI32: * This symbol is defined if the C compiler can cast negative * or large floating point numbers to 32-bit ints. @@ -1157,12 +1285,110 @@ sed <config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un- */ #$d_void_closedir VOID_CLOSEDIR /**/ +/* HAS_CSH: + * This symbol, if defined, indicates that the C-shell exists. + */ +/* CSH: + * This symbol, if defined, contains the full pathname of csh. + */ +#$d_csh HAS_CSH /**/ +#ifdef HAS_CSH +#define CSH "$full_csh" /**/ +#endif + +/* DLSYM_NEEDS_UNDERSCORE: + * This symbol, if defined, indicates that we need to prepend an + * underscore to the symbol name before calling dlsym(). This only + * makes sense if you *have* dlsym, which we will presume is the + * case if you're using dl_dlopen.xs. + */ +#$d_dlsymun DLSYM_NEEDS_UNDERSCORE /**/ + +/* HAS_DRAND48_PROTO: + * This symbol, if defined, indicates that the system provides + * a prototype for the drand48() function. Otherwise, it is up + * to the program to supply one. A good guess is + * extern double drand48 _((void)); + */ +#$d_drand48proto HAS_DRAND48_PROTO /**/ + +/* HAS_ENDGRENT: + * This symbol, if defined, indicates that the getgrent routine is + * available for finalizing sequential access of the group database. + */ +#$d_endgrent HAS_ENDGRENT /**/ + +/* HAS_ENDHOSTENT: + * This symbol, if defined, indicates that the endhostent() routine is + * available to close whatever was being used for host queries. + */ +#$d_endhent HAS_ENDHOSTENT /**/ + +/* HAS_ENDNETENT: + * This symbol, if defined, indicates that the endnetent() routine is + * available to close whatever was being used for network queries. + */ +#$d_endnent HAS_ENDNETENT /**/ + +/* HAS_ENDPROTOENT: + * This symbol, if defined, indicates that the endprotoent() routine is + * available to close whatever was being used for protocol queries. + */ +#$d_endpent HAS_ENDPROTOENT /**/ + +/* HAS_ENDPWENT: + * This symbol, if defined, indicates that the getgrent routine is + * available for finalizing sequential access of the passwd database. + */ +#$d_endpwent HAS_ENDPWENT /**/ + +/* HAS_ENDSERVENT: + * This symbol, if defined, indicates that the endservent() routine is + * available to close whatever was being used for service queries. + */ +#$d_endsent HAS_ENDSERVENT /**/ + +/* HAS_ENDSPENT: + * This symbol, if defined, indicates that the endspent system call is + * available to finalize the scan of SysV shadow password entries. + */ +#$d_endspent HAS_ENDSPENT /**/ + /* HAS_FD_SET: * This symbol, when defined, indicates presence of the fd_set typedef * in */ #$d_fd_set HAS_FD_SET /**/ +/* HAS_FPOS64_T: + * This symbol will be defined if the C compiler supports fpos64_t. + */ +#$d_fpos64_t HAS_FPOS64_T /**/ + +/* HAS_STRUCT_FS_DATA: + * This symbol, if defined, indicates that the struct fs_data + * to do statfs() is supported. + */ +#$d_fs_data_s HAS_STRUCT_FS_DATA /**/ + +/* HAS_FSEEKO: + * This symbol, if defined, indicates that the fseeko routine is + * available to fseek beyond 32 bits (useful for ILP32 hosts). + */ +#$d_fseeko HAS_FSEEKO /**/ + +/* HAS_FSTATFS: + * This symbol, if defined, indicates that the fstatfs routine is + * available to stat filesystems by file descriptors. + */ +#$d_fstatfs HAS_FSTATFS /**/ + +/* HAS_FTELLO: + * This symbol, if defined, indicates that the ftello routine is + * available to ftell beyond 32 bits (useful for ILP32 hosts). + */ +#$d_ftello HAS_FTELLO /**/ + /* Gconvert: * This preprocessor macro is defined to convert a floating point * number to a string without a trailing decimal point. This @@ -1180,366 +1406,11 @@ sed <config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un- */ #define Gconvert(x,n,t,b) $d_Gconvert -/* HAS_GNULIBC: - * This symbol, if defined, indicates to the C program that - * the GNU C library is being used. +/* HAS_GETCWD: + * This symbol, if defined, indicates that the getcwd routine is + * available to get the current working directory. */ -#$d_gnulibc HAS_GNULIBC /**/ -/* HAS_ISASCII: - * This manifest constant lets the C program know that isascii - * is available. - */ -#$d_isascii HAS_ISASCII /**/ - -/* HAS_LCHOWN: - * This symbol, if defined, indicates that the lchown routine is - * available to operate on a symbolic link (instead of following the - * link). - */ -#$d_lchown HAS_LCHOWN /**/ - -/* HAS_OPEN3: - * This manifest constant lets the C program know that the three - * argument form of open(2) is available. - */ -#$d_open3 HAS_OPEN3 /**/ - -/* HAS_SAFE_BCOPY: - * This symbol, if defined, indicates that the bcopy routine is available - * to copy potentially overlapping memory blocks. Otherwise you should - * probably use memmove() or memcpy(). If neither is defined, roll your - * own version. - */ -#$d_safebcpy HAS_SAFE_BCOPY /**/ - -/* HAS_SAFE_MEMCPY: - * This symbol, if defined, indicates that the memcpy routine is available - * to copy potentially overlapping memory blocks. Otherwise you should - * probably use memmove() or memcpy(). If neither is defined, roll your - * own version. - */ -#$d_safemcpy HAS_SAFE_MEMCPY /**/ - -/* HAS_SANE_MEMCMP: - * This symbol, if defined, indicates that the memcmp routine is available - * and can be used to compare relative magnitudes of chars with their high - * bits set. If it is not defined, roll your own version. - */ -#$d_sanemcmp HAS_SANE_MEMCMP /**/ - -/* HAS_SIGACTION: - * This symbol, if defined, indicates that Vr4's sigaction() routine - * is available. - */ -#$d_sigaction HAS_SIGACTION /**/ - -/* HAS_SIGSETJMP: - * This variable indicates to the C program that the sigsetjmp() - * routine is available to save the calling process's registers - * and stack environment for later use by siglongjmp(), and - * to optionally save the process's signal mask. See - * Sigjmp_buf, Sigsetjmp, and Siglongjmp. - */ -/* Sigjmp_buf: - * This is the buffer type to be used with Sigsetjmp and Siglongjmp. - */ -/* Sigsetjmp: - * This macro is used in the same way as sigsetjmp(), but will invoke - * traditional setjmp() if sigsetjmp isn't available. - * See HAS_SIGSETJMP. - */ -/* Siglongjmp: - * This macro is used in the same way as siglongjmp(), but will invoke - * traditional longjmp() if siglongjmp isn't available. - * See HAS_SIGSETJMP. - */ -#$d_sigsetjmp HAS_SIGSETJMP /**/ -#ifdef HAS_SIGSETJMP -#define Sigjmp_buf sigjmp_buf -#define Sigsetjmp(buf,save_mask) sigsetjmp((buf),(save_mask)) -#define Siglongjmp(buf,retval) siglongjmp((buf),(retval)) -#else -#define Sigjmp_buf jmp_buf -#define Sigsetjmp(buf,save_mask) setjmp((buf)) -#define Siglongjmp(buf,retval) longjmp((buf),(retval)) -#endif - -/* USE_STDIO_PTR: - * This symbol is defined if the _ptr and _cnt fields (or similar) - * of the stdio FILE structure can be used to access the stdio buffer - * for a file handle. If this is defined, then the FILE_ptr(fp) - * and FILE_cnt(fp) macros will also be defined and should be used - * to access these fields. - */ -/* FILE_ptr: - * This macro is used to access the _ptr field (or equivalent) of the - * FILE structure pointed to by its argument. This macro will always be - * defined if USE_STDIO_PTR is defined. - */ -/* STDIO_PTR_LVALUE: - * This symbol is defined if the FILE_ptr macro can be used as an - * lvalue. - */ -/* FILE_cnt: - * This macro is used to access the _cnt field (or equivalent) of the - * FILE structure pointed to by its argument. This macro will always be - * defined if USE_STDIO_PTR is defined. - */ -/* STDIO_CNT_LVALUE: - * This symbol is defined if the FILE_cnt macro can be used as an - * lvalue. - */ -#$d_stdstdio USE_STDIO_PTR /**/ -#ifdef USE_STDIO_PTR -#define FILE_ptr(fp) $stdio_ptr -#$d_stdio_ptr_lval STDIO_PTR_LVALUE /**/ -#define FILE_cnt(fp) $stdio_cnt -#$d_stdio_cnt_lval STDIO_CNT_LVALUE /**/ -#endif - -/* USE_STDIO_BASE: - * This symbol is defined if the _base field (or similar) of the - * stdio FILE structure can be used to access the stdio buffer for - * a file handle. If this is defined, then the FILE_base(fp) macro - * will also be defined and should be used to access this field. - * Also, the FILE_bufsiz(fp) macro will be defined and should be used - * to determine the number of bytes in the buffer. USE_STDIO_BASE - * will never be defined unless USE_STDIO_PTR is. - */ -/* FILE_base: - * This macro is used to access the _base field (or equivalent) of the - * FILE structure pointed to by its argument. This macro will always be - * defined if USE_STDIO_BASE is defined. - */ -/* FILE_bufsiz: - * This macro is used to determine the number of bytes in the I/O - * buffer pointed to by _base field (or equivalent) of the FILE - * structure pointed to its argument. This macro will always be defined - * if USE_STDIO_BASE is defined. - */ -#$d_stdiobase USE_STDIO_BASE /**/ -#ifdef USE_STDIO_BASE -#define FILE_base(fp) $stdio_base -#define FILE_bufsiz(fp) $stdio_bufsiz -#endif - -/* HAS_VPRINTF: - * This symbol, if defined, indicates that the vprintf routine is available - * to printf with a pointer to an argument list. If unavailable, you - * may need to write your own, probably in terms of _doprnt(). - */ -/* USE_CHAR_VSPRINTF: - * This symbol is defined if this system has vsprintf() returning type - * (char*). The trend seems to be to declare it as "int vsprintf()". It - * is up to the package author to declare vsprintf correctly based on the - * symbol. - */ -#$d_vprintf HAS_VPRINTF /**/ -#$d_charvspr USE_CHAR_VSPRINTF /**/ - -/* DOUBLESIZE: - * This symbol contains the size of a double, so that the C preprocessor - * can make decisions based on it. - */ -#define DOUBLESIZE $doublesize /**/ - -/* I_TIME: - * This symbol, if defined, indicates to the C program that it should - * include . - */ -/* I_SYS_TIME: - * This symbol, if defined, indicates to the C program that it should - * include . - */ -/* I_SYS_TIME_KERNEL: - * This symbol, if defined, indicates to the C program that it should - * include with KERNEL defined. - */ -#$i_time I_TIME /**/ -#$i_systime I_SYS_TIME /**/ -#$i_systimek I_SYS_TIME_KERNEL /**/ - -/* VAL_O_NONBLOCK: - * This symbol is to be used during open() or fcntl(F_SETFL) to turn on - * non-blocking I/O for the file descriptor. Note that there is no way - * back, i.e. you cannot turn it blocking again this way. If you wish to - * alternatively switch between blocking and non-blocking, use the - * ioctl(FIOSNBIO) call instead, but that is not supported by all devices. - */ -/* VAL_EAGAIN: - * This symbol holds the errno error code set by read() when no data was - * present on the non-blocking file descriptor. - */ -/* RD_NODATA: - * This symbol holds the return code from read() when no data is present - * on the non-blocking file descriptor. Be careful! If EOF_NONBLOCK is - * not defined, then you can't distinguish between no data and EOF by - * issuing a read(). You'll have to find another way to tell for sure! - */ -/* EOF_NONBLOCK: - * This symbol, if defined, indicates to the C program that a read() on - * a non-blocking file descriptor will return 0 on EOF, and not the value - * held in RD_NODATA (-1 usually, in that case!). - */ -#define VAL_O_NONBLOCK $o_nonblock -#define VAL_EAGAIN $eagain -#define RD_NODATA $rd_nodata -#$d_eofnblk EOF_NONBLOCK - -/* PTRSIZE: - * This symbol contains the size of a pointer, so that the C preprocessor - * can make decisions based on it. It will be sizeof(void *) if - * the compiler supports (void *); otherwise it will be - * sizeof(char *). - */ -#define PTRSIZE $ptrsize /**/ - -/* Drand01: - * This macro is to be used to generate uniformly distributed - * random numbers over the range [0., 1.[. You may have to supply - * an 'extern double drand48();' in your program since SunOS 4.1.3 - * doesn't provide you with anything relevant in it's headers. - * See HAS_DRAND48_PROTO. - */ -/* Rand_seed_t: - * This symbol defines the type of the argument of the - * random seed function. - */ -/* seedDrand01: - * This symbol defines the macro to be used in seeding the - * random number generator (see Drand01). - */ -/* RANDBITS: - * This symbol indicates how many bits are produced by the - * function used to generate normalized random numbers. - * Values include 15, 16, 31, and 48. - */ -#define Drand01() $drand01 /**/ -#define Rand_seed_t $randseedtype /**/ -#define seedDrand01(x) $seedfunc((Rand_seed_t)x) /**/ -#define RANDBITS $randbits /**/ - -/* SSize_t: - * This symbol holds the type used by functions that return - * a count of bytes or an error condition. It must be a signed type. - * It is usually ssize_t, but may be long or int, etc. - * It may be necessary to include or - * to get any typedef'ed information. - * We will pick a type such that sizeof(SSize_t) == sizeof(Size_t). - */ -#define SSize_t $ssizetype /* signed count of bytes */ - -/* EBCDIC: - * This symbol, if defined, indicates that this system uses - * EBCDIC encoding. - */ -#$ebcdic EBCDIC /**/ - -/* OSNAME: - * This symbol contains the name of the operating system, as determined - * by Configure. You shouldn't rely on it too much; the specific - * feature tests from Configure are generally more reliable. - */ -#define OSNAME "$osname" /**/ - -/* CAT2: - * This macro catenates 2 tokens together. - */ -/* STRINGIFY: - * This macro surrounds its token with double quotes. - */ -#if $cpp_stuff == 1 -#define CAT2(a,b)a/**/b -#define STRINGIFY(a)"a" - /* If you can get stringification with catify, tell me how! */ -#endif -#if $cpp_stuff == 42 -#define CAT2(a,b)a ## b -#define StGiFy(a)# a -#define STRINGIFY(a)StGiFy(a) -#endif -#if $cpp_stuff != 1 && $cpp_stuff != 42 -#include "Bletch: How does this C preprocessor catenate tokens?" -#endif - -/* CPPSTDIN: - * This symbol contains the first part of the string which will invoke - * the C preprocessor on the standard input and produce to standard - * output. Typical value of "cc -E" or "/lib/cpp", but it can also - * call a wrapper. See CPPRUN. - */ -/* CPPMINUS: - * This symbol contains the second part of the string which will invoke - * the C preprocessor on the standard input and produce to standard - * output. This symbol will have the value "-" if CPPSTDIN needs a minus - * to specify standard input, otherwise the value is "". - */ -/* CPPRUN: - * This symbol contains the string which will invoke a C preprocessor on - * the standard input and produce to standard output. It needs to end - * with CPPLAST, after all other preprocessor flags have been specified. - * The main difference with CPPSTDIN is that this program will never be a - * pointer to a shell wrapper, i.e. it will be empty if no preprocessor is - * available directly to the user. Note that it may well be different from - * the preprocessor used to compile the C program. - */ -#define CPPSTDIN "$cppstdin" -#define CPPMINUS "$cppminus" -#define CPPRUN "$cpprun" - -/* HAS_ACCESS: - * This manifest constant lets the C program know that the access() - * system call is available to check for accessibility using real UID/GID. - * (always present on UNIX.) - */ -#$d_access HAS_ACCESS /**/ - -/* HAS_CSH: - * This symbol, if defined, indicates that the C-shell exists. - */ -/* CSH: - * This symbol, if defined, contains the full pathname of csh. - */ -#$d_csh HAS_CSH /**/ -#ifdef HAS_CSH -#define CSH "$full_csh" /**/ -#endif - -/* HAS_ENDGRENT: - * This symbol, if defined, indicates that the getgrent routine is - * available for finalizing sequential access of the group database. - */ -#$d_endgrent HAS_ENDGRENT /**/ - -/* HAS_ENDHOSTENT: - * This symbol, if defined, indicates that the endhostent() routine is - * available to close whatever was being used for host queries. - */ -#$d_endhent HAS_ENDHOSTENT /**/ - -/* HAS_ENDNETENT: - * This symbol, if defined, indicates that the endnetent() routine is - * available to close whatever was being used for network queries. - */ -#$d_endnent HAS_ENDNETENT /**/ - -/* HAS_ENDPROTOENT: - * This symbol, if defined, indicates that the endprotoent() routine is - * available to close whatever was being used for protocol queries. - */ -#$d_endpent HAS_ENDPROTOENT /**/ - -/* HAS_ENDPWENT: - * This symbol, if defined, indicates that the getgrent routine is - * available for finalizing sequential access of the passwd database. - */ -#$d_endpwent HAS_ENDPWENT /**/ - -/* HAS_ENDSERVENT: - * This symbol, if defined, indicates that the endservent() routine is - * available to close whatever was being used for service queries. - */ -#$d_endsent HAS_ENDSERVENT /**/ +#$d_getcwd HAS_GETCWD /**/ /* HAS_GETGRENT: * This symbol, if defined, indicates that the getgrent routine is @@ -1582,13 +1453,38 @@ sed <config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un- * so that it is safe even if used by a process with super-user * privileges. */ +/* HAS_PHOSTNAME: + * This symbol, if defined, indicates that the C program may use the + * contents of PHOSTNAME as a command to feed to the popen() routine + * to derive the host name. + */ #$d_gethname HAS_GETHOSTNAME /**/ #$d_uname HAS_UNAME /**/ -#$d_phostname HAS_PHOSTNAME +#$d_phostname HAS_PHOSTNAME /**/ #ifdef HAS_PHOSTNAME #define PHOSTNAME "$aphostname" /* How to get the host name */ #endif +/* HAS_GETHOST_PROTOS: + * This symbol, if defined, indicates that includes + * prototypes for gethostent(), gethostbyname(), and + * gethostbyaddr(). Otherwise, it is up to the program to guess + * them. See netdbtype.U for probing for various Netdb_xxx_t types. + */ +#$d_gethostprotos HAS_GETHOST_PROTOS /**/ + +/* HAS_GETMNT: + * This symbol, if defined, indicates that the getmnt routine is + * available to get filesystem mount info by filename. + */ +#$d_getmnt HAS_GETMNT /**/ + +/* HAS_GETMNTENT: + * This symbol, if defined, indicates that the getmntent routine is + * available to iterate through mounted file systems to get their info. + */ +#$d_getmntent HAS_GETMNTENT /**/ + /* HAS_GETNETBYADDR: * This symbol, if defined, indicates that the getnetbyaddr() routine is * available to look up networks by their IP addresses. @@ -1607,6 +1503,14 @@ sed <config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un- */ #$d_getnent HAS_GETNETENT /**/ +/* HAS_GETNET_PROTOS: + * This symbol, if defined, indicates that includes + * prototypes for getnetent(), getnetbyname(), and + * getnetbyaddr(). Otherwise, it is up to the program to guess + * them. See netdbtype.U for probing for various Netdb_xxx_t types. + */ +#$d_getnetprotos HAS_GETNET_PROTOS /**/ + /* HAS_GETPROTOENT: * This symbol, if defined, indicates that the getprotoent() routine is * available to look up protocols in some data base or another. @@ -1624,6 +1528,14 @@ sed <config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un- #$d_getpbyname HAS_GETPROTOBYNAME /**/ #$d_getpbynumber HAS_GETPROTOBYNUMBER /**/ +/* HAS_GETPROTO_PROTOS: + * This symbol, if defined, indicates that includes + * prototypes for getprotoent(), getprotobyname(), and + * getprotobyaddr(). Otherwise, it is up to the program to guess + * them. See netdbtype.U for probing for various Netdb_xxx_t types. + */ +#$d_getprotoprotos HAS_GETPROTO_PROTOS /**/ + /* HAS_GETPWENT: * This symbol, if defined, indicates that the getpwent routine is * available for sequential access of the passwd database. @@ -1637,6 +1549,26 @@ sed <config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un- */ #$d_getsent HAS_GETSERVENT /**/ +/* HAS_GETSERV_PROTOS: + * This symbol, if defined, indicates that includes + * prototypes for getservent(), getservbyname(), and + * getservbyaddr(). Otherwise, it is up to the program to guess + * them. See netdbtype.U for probing for various Netdb_xxx_t types. + */ +#$d_getservprotos HAS_GETSERV_PROTOS /**/ + +/* HAS_GETSPENT: + * This symbol, if defined, indicates that the getspent system call is + * available to retrieve SysV shadow password entries sequentially. + */ +#$d_getspent HAS_GETSPENT /**/ + +/* HAS_GETSPNAM: + * This symbol, if defined, indicates that the getspnam system call is + * available to retrieve SysV shadow password entries by name. + */ +#$d_getspnam HAS_GETSPNAM /**/ + /* HAS_GETSERVBYNAME: * This symbol, if defined, indicates that the getservbyname() * routine is available to look up services by their name. @@ -1648,6 +1580,20 @@ sed <config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un- #$d_getsbyname HAS_GETSERVBYNAME /**/ #$d_getsbyport HAS_GETSERVBYPORT /**/ +/* HAS_GNULIBC: + * This symbol, if defined, indicates to the C program that + * the GNU C library is being used. + */ +#$d_gnulibc HAS_GNULIBC /**/ +#if defined(HAS_GNULIBC) && !defined(_GNU_SOURCE) +# define _GNU_SOURCE +#endif +/* HAS_HASMNTOPT: + * This symbol, if defined, indicates that the hasmntopt routine is + * available to query the mount options of file systems. + */ +#$d_hasmntopt HAS_HASMNTOPT /**/ + /* HAS_HTONL: * This symbol, if defined, indicates that the htonl() routine (and * friends htons() ntohl() ntohs()) are available to do network @@ -1663,15 +1609,49 @@ sed <config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un- * friends htonl() htons() ntohs()) are available to do network * order byte swapping. */ -/* HAS_NTOHS: - * This symbol, if defined, indicates that the ntohs() routine (and - * friends htonl() htons() ntohl()) are available to do network - * order byte swapping. +/* HAS_NTOHS: + * This symbol, if defined, indicates that the ntohs() routine (and + * friends htonl() htons() ntohl()) are available to do network + * order byte swapping. + */ +#$d_htonl HAS_HTONL /**/ +#$d_htonl HAS_HTONS /**/ +#$d_htonl HAS_NTOHL /**/ +#$d_htonl HAS_NTOHS /**/ + +/* HAS_ICONV: + * This symbol, if defined, indicates that the iconv routine is + * available to do character set conversions. + */ +#$d_iconv HAS_ICONV /**/ + +/* HAS_INT64_T: + * This symbol will defined if the C compiler supports int64_t. + * Usually the needs to be included, but sometimes + * is enough. + */ +#$d_int64_t HAS_INT64_T /**/ + +/* HAS_ISASCII: + * This manifest constant lets the C program know that isascii + * is available. + */ +#$d_isascii HAS_ISASCII /**/ + +/* HAS_LCHOWN: + * This symbol, if defined, indicates that the lchown routine is + * available to operate on a symbolic link (instead of following the + * link). */ -#$d_htonl HAS_HTONL /**/ -#$d_htonl HAS_HTONS /**/ -#$d_htonl HAS_NTOHL /**/ -#$d_htonl HAS_NTOHS /**/ +#$d_lchown HAS_LCHOWN /**/ + +/* HAS_LDBL_DIG: + * This symbol, if defined, indicates that this system's + * or defines the symbol LDBL_DIG, which is the number + * of significant digits in a long double precision number. Unlike + * for DBL_DIG, there's no good guess for LDBL_DIG if it is undefined. + */ +#$d_ldbl_dig HAS_LDBL_DIG /* */ /* HAS_LONG_DOUBLE: * This symbol will be defined if the C compiler supports long @@ -1700,12 +1680,38 @@ sed <config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un- #define LONGLONGSIZE $longlongsize /**/ #endif +/* HAS_MADVISE: + * This symbol, if defined, indicates that the madvise system call is + * available to map a file into memory. + */ +#$d_madvise HAS_MADVISE /**/ + /* HAS_MEMCHR: * This symbol, if defined, indicates that the memchr routine is available * to locate characters within a C string. */ #$d_memchr HAS_MEMCHR /**/ +/* HAS_MKDTEMP: + * This symbol, if defined, indicates that the mkdtemp routine is + * available to exclusively create a uniquely named temporary directory. + */ +#$d_mkdtemp HAS_MKDTEMP /**/ + +/* HAS_MKSTEMP: + * This symbol, if defined, indicates that the mkstemp routine is + * available to exclusively create and open a uniquely named + * temporary file. + */ +#$d_mkstemp HAS_MKSTEMP /**/ + +/* HAS_MKSTEMPS: + * This symbol, if defined, indicates that the mkstemps routine is + * available to excluslvely create and open a uniquely named + * (with a suffix) temporary file. + */ +#$d_mkstemps HAS_MKSTEMPS /**/ + /* HAS_MMAP: * This symbol, if defined, indicates that the mmap system call is * available to map a file into memory. @@ -1718,12 +1724,81 @@ sed <config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un- #$d_mmap HAS_MMAP /**/ #define Mmap_t $mmaptype /**/ +/* HAS_MPROTECT: + * This symbol, if defined, indicates that the mprotect system call is + * available to modify the access protection of a memory mapped file. + */ +#$d_mprotect HAS_MPROTECT /**/ + /* HAS_MSG: * This symbol, if defined, indicates that the entire msg*(2) library is * supported (IPC mechanism based on message queues). */ #$d_msg HAS_MSG /**/ +/* HAS_OFF64_T: + * This symbol will be defined if the C compiler supports off64_t. + */ +#$d_off64_t HAS_OFF64_T /**/ + +/* HAS_OPEN3: + * This manifest constant lets the C program know that the three + * argument form of open(2) is available. + */ +#$d_open3 HAS_OPEN3 /**/ + +/* OLD_PTHREAD_CREATE_JOINABLE: + * This symbol, if defined, indicates how to create pthread + * in joinable (aka undetached) state. NOTE: not defined + * if pthread.h already has defined PTHREAD_CREATE_JOINABLE + * (the new version of the constant). + * If defined, known values are PTHREAD_CREATE_UNDETACHED + * and __UNDETACHED. + */ +#$d_old_pthread_create_joinable OLD_PTHREAD_CREATE_JOINABLE $old_pthread_create_joinable /**/ + +/* HAS_PTHREAD_YIELD: + * This symbol, if defined, indicates that the pthread_yield + * routine is available to yield the execution of the current + * thread. sched_yield is preferable to pthread_yield. + */ +/* SCHED_YIELD: + * This symbol defines the way to yield the execution of + * the current thread. Known ways are sched_yield, + * pthread_yield, and pthread_yield with NULL. + */ +/* HAS_SCHED_YIELD: + * This symbol, if defined, indicates that the sched_yield + * routine is available to yield the execution of the current + * thread. sched_yield is preferable to pthread_yield. + */ +#$d_pthread_yield HAS_PTHREAD_YIELD /**/ +#define SCHED_YIELD $sched_yield /**/ +#$d_sched_yield HAS_SCHED_YIELD /**/ + +/* HAS_SAFE_BCOPY: + * This symbol, if defined, indicates that the bcopy routine is available + * to copy potentially overlapping memory blocks. Otherwise you should + * probably use memmove() or memcpy(). If neither is defined, roll your + * own version. + */ +#$d_safebcpy HAS_SAFE_BCOPY /**/ + +/* HAS_SAFE_MEMCPY: + * This symbol, if defined, indicates that the memcpy routine is available + * to copy potentially overlapping memory blocks. Otherwise you should + * probably use memmove() or memcpy(). If neither is defined, roll your + * own version. + */ +#$d_safemcpy HAS_SAFE_MEMCPY /**/ + +/* HAS_SANE_MEMCMP: + * This symbol, if defined, indicates that the memcmp routine is available + * and can be used to compare relative magnitudes of chars with their high + * bits set. If it is not defined, roll your own version. + */ +#$d_sanemcmp HAS_SANE_MEMCMP /**/ + /* HAS_SEM: * This symbol, if defined, indicates that the entire sem*(2) library is * supported. @@ -1773,6 +1848,12 @@ sed <config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un- */ #$d_setsent HAS_SETSERVENT /**/ +/* HAS_SETSPENT: + * This symbol, if defined, indicates that the setspent system call is + * available to initialize the scan of SysV shadow password entries. + */ +#$d_setspent HAS_SETSPENT /**/ + /* HAS_SETVBUF: * This symbol, if defined, indicates that the setvbuf routine is * available to change buffering on an open stdio stream. @@ -1780,12 +1861,55 @@ sed <config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un- */ #$d_setvbuf HAS_SETVBUF /**/ +/* USE_SFIO: + * This symbol, if defined, indicates that sfio should + * be used. + */ +#$d_sfio USE_SFIO /**/ + /* HAS_SHM: * This symbol, if defined, indicates that the entire shm*(2) library is * supported. */ #$d_shm HAS_SHM /**/ +/* HAS_SIGACTION: + * This symbol, if defined, indicates that Vr4's sigaction() routine + * is available. + */ +#$d_sigaction HAS_SIGACTION /**/ + +/* HAS_SIGSETJMP: + * This variable indicates to the C program that the sigsetjmp() + * routine is available to save the calling process's registers + * and stack environment for later use by siglongjmp(), and + * to optionally save the process's signal mask. See + * Sigjmp_buf, Sigsetjmp, and Siglongjmp. + */ +/* Sigjmp_buf: + * This is the buffer type to be used with Sigsetjmp and Siglongjmp. + */ +/* Sigsetjmp: + * This macro is used in the same way as sigsetjmp(), but will invoke + * traditional setjmp() if sigsetjmp isn't available. + * See HAS_SIGSETJMP. + */ +/* Siglongjmp: + * This macro is used in the same way as siglongjmp(), but will invoke + * traditional longjmp() if siglongjmp isn't available. + * See HAS_SIGSETJMP. + */ +#$d_sigsetjmp HAS_SIGSETJMP /**/ +#ifdef HAS_SIGSETJMP +#define Sigjmp_buf sigjmp_buf +#define Sigsetjmp(buf,save_mask) sigsetjmp((buf),(save_mask)) +#define Siglongjmp(buf,retval) siglongjmp((buf),(retval)) +#else +#define Sigjmp_buf jmp_buf +#define Sigsetjmp(buf,save_mask) setjmp((buf)) +#define Siglongjmp(buf,retval) longjmp((buf),(retval)) +#endif + /* HAS_SOCKET: * This symbol, if defined, indicates that the BSD socket interface is * supported. @@ -1824,26 +1948,6 @@ sed <config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un- * Checking just with #ifdef might not be enough because this symbol * has been known to be an enum. */ -/* HAS_SENDMSG: - * This symbol, if defined, indicates that the sendmsg is supported - * to send messages between sockets. You will also need struct - * iovec from , HAS_STRUCT_IOVEC and I_SYSUIO. - */ -/* HAS_RECVMSG: - * This symbol, if defined, indicates that the recvmsg is supported - * to send messages between sockets. You will also need struct - * iovec from , HAS_STRUCT_IOVEC and I_SYSUIO. - */ -/* HAS_STRUCT_MSGHDR: - * This symbol, if defined, indicates that the struct msghdr - * (BSD 4.3 or 4.4) is supported. You will also need struct - * iovec from , HAS_STRUCT_IOVEC and I_SYSUIO. - */ -/* HAS_STRUCT_CMSGHDR: - * This symbol, if defined, indicates that the struct cmsghdr - * (BSD 4.4) is supported. You will also need struct - * iovec from , HAS_STRUCT_IOVEC and I_SYSUIO. - */ #$d_socket HAS_SOCKET /**/ #$d_sockpair HAS_SOCKETPAIR /**/ #$d_msg_ctrunc HAS_MSG_CTRUNC /**/ @@ -1852,16 +1956,102 @@ sed <config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un- #$d_msg_peek HAS_MSG_PEEK /**/ #$d_msg_proxy HAS_MSG_PROXY /**/ #$d_scm_rights HAS_SCM_RIGHTS /**/ -#$d_sendmsg HAS_SENDMSG /**/ -#$d_recvmsg HAS_RECVMSG /**/ -#$d_msghdr_s HAS_STRUCT_MSGHDR /**/ -#$d_cmsghdr_s HAS_STRUCT_CMSGHDR /**/ + +/* HAS_SQRTL: + * This symbol, if defined, indicates that the sqrtl routine is + * available to do long double square roots. + */ +#$d_sqrtl HAS_SQRTL /**/ /* USE_STAT_BLOCKS: * This symbol is defined if this system has a stat structure declaring * st_blksize and st_blocks. */ +#ifndef USE_STAT_BLOCKS #$d_statblks USE_STAT_BLOCKS /**/ +#endif + +/* HAS_STRUCT_STATFS_F_FLAGS: + * This symbol, if defined, indicates that the struct statfs + * does have the f_flags member containing the mount flags of + * the filesystem containing the file. + * This kind of struct statfs is coming from (BSD 4.3), + * not from (SYSV). Older BSDs (like Ultrix) do not + * have statfs() and struct statfs, they have ustat() and getmnt() + * with struct ustat and struct fs_data. + */ +#$d_statfs_f_flags HAS_STRUCT_STATFS_F_FLAGS /**/ + +/* HAS_STRUCT_STATFS: + * This symbol, if defined, indicates that the struct statfs + * to do statfs() is supported. + */ +#$d_statfs_s HAS_STRUCT_STATFS /**/ + +/* HAS_FSTATVFS: + * This symbol, if defined, indicates that the fstatvfs routine is + * available to stat filesystems by file descriptors. + */ +#$d_fstatvfs HAS_FSTATVFS /**/ + +/* USE_STDIO_PTR: + * This symbol is defined if the _ptr and _cnt fields (or similar) + * of the stdio FILE structure can be used to access the stdio buffer + * for a file handle. If this is defined, then the FILE_ptr(fp) + * and FILE_cnt(fp) macros will also be defined and should be used + * to access these fields. + */ +/* FILE_ptr: + * This macro is used to access the _ptr field (or equivalent) of the + * FILE structure pointed to by its argument. This macro will always be + * defined if USE_STDIO_PTR is defined. + */ +/* STDIO_PTR_LVALUE: + * This symbol is defined if the FILE_ptr macro can be used as an + * lvalue. + */ +/* FILE_cnt: + * This macro is used to access the _cnt field (or equivalent) of the + * FILE structure pointed to by its argument. This macro will always be + * defined if USE_STDIO_PTR is defined. + */ +/* STDIO_CNT_LVALUE: + * This symbol is defined if the FILE_cnt macro can be used as an + * lvalue. + */ +#$d_stdstdio USE_STDIO_PTR /**/ +#ifdef USE_STDIO_PTR +#define FILE_ptr(fp) $stdio_ptr +#$d_stdio_ptr_lval STDIO_PTR_LVALUE /**/ +#define FILE_cnt(fp) $stdio_cnt +#$d_stdio_cnt_lval STDIO_CNT_LVALUE /**/ +#endif + +/* USE_STDIO_BASE: + * This symbol is defined if the _base field (or similar) of the + * stdio FILE structure can be used to access the stdio buffer for + * a file handle. If this is defined, then the FILE_base(fp) macro + * will also be defined and should be used to access this field. + * Also, the FILE_bufsiz(fp) macro will be defined and should be used + * to determine the number of bytes in the buffer. USE_STDIO_BASE + * will never be defined unless USE_STDIO_PTR is. + */ +/* FILE_base: + * This macro is used to access the _base field (or equivalent) of the + * FILE structure pointed to by its argument. This macro will always be + * defined if USE_STDIO_BASE is defined. + */ +/* FILE_bufsiz: + * This macro is used to determine the number of bytes in the I/O + * buffer pointed to by _base field (or equivalent) of the FILE + * structure pointed to its argument. This macro will always be defined + * if USE_STDIO_BASE is defined. + */ +#$d_stdiobase USE_STDIO_BASE /**/ +#ifdef USE_STDIO_BASE +#define FILE_base(fp) $stdio_base +#define FILE_bufsiz(fp) $stdio_bufsiz +#endif /* HAS_STRERROR: * This symbol, if defined, indicates that the strerror routine is @@ -1882,6 +2072,52 @@ sed <config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un- #$d_syserrlst HAS_SYS_ERRLIST /**/ #define Strerror(e) $d_strerrm +/* HAS_STRTOLD: + * This symbol, if defined, indicates that the strtold routine is + * available to convert strings to long doubles. + */ +#$d_strtold HAS_STRTOLD /**/ + +/* HAS_STRTOLL: + * This symbol, if defined, indicates that the strtoll routine is + * available to convert strings to long longs. + */ +#$d_strtoll HAS_STRTOLL /**/ + +/* HAS_STRTOULL: + * This symbol, if defined, indicates that the strtoull routine is + * available to convert strings to unsigned long longs. + */ +#$d_strtoull HAS_STRTOULL /**/ + +/* HAS_STRTOUQ: + * This symbol, if defined, indicates that the strtouq routine is + * available to convert strings to unsigned long longs (quads). + */ +#$d_strtouq HAS_STRTOUQ /**/ + +/* HAS_TELLDIR_PROTO: + * This symbol, if defined, indicates that the system provides + * a prototype for the telldir() function. Otherwise, it is up + * to the program to supply one. A good guess is + * extern long telldir _((DIR*)); + */ +#$d_telldirproto HAS_TELLDIR_PROTO /**/ + +/* Time_t: + * This symbol holds the type returned by time(). It can be long, + * or time_t on BSD sites (in which case should be + * included). + */ +#define Time_t $timetype /* Time type */ + +/* HAS_TIMES: + * This symbol, if defined, indicates that the times() routine exists. + * Note that this became obsolete on some systems (SUNOS), which now + * use getrusage(). It may be necessary to include . + */ +#$d_times HAS_TIMES /**/ + /* HAS_UNION_SEMUN: * This symbol, if defined, indicates that the union semun is * defined by including . If not, the user code @@ -1904,6 +2140,12 @@ sed <config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un- #$d_semctl_semun USE_SEMCTL_SEMUN /**/ #$d_semctl_semid_ds USE_SEMCTL_SEMID_DS /**/ +/* HAS_USTAT: + * This symbol, if defined, indicates that the ustat system call is + * available to query file system statistics by dev_t. + */ +#$d_ustat HAS_USTAT /**/ + /* HAS_VFORK: * This symbol, if defined, indicates that vfork() exists. */ @@ -1917,6 +2159,78 @@ sed <config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un- */ #define Signal_t $signal_t /* Signal handler's return type */ +/* HAS_VPRINTF: + * This symbol, if defined, indicates that the vprintf routine is available + * to printf with a pointer to an argument list. If unavailable, you + * may need to write your own, probably in terms of _doprnt(). + */ +/* USE_CHAR_VSPRINTF: + * This symbol is defined if this system has vsprintf() returning type + * (char*). The trend seems to be to declare it as "int vsprintf()". It + * is up to the package author to declare vsprintf correctly based on the + * symbol. + */ +#$d_vprintf HAS_VPRINTF /**/ +#$d_charvspr USE_CHAR_VSPRINTF /**/ + +/* USE_DYNAMIC_LOADING: + * This symbol, if defined, indicates that dynamic loading of + * some sort is available. + */ +#$usedl USE_DYNAMIC_LOADING /**/ + +/* DOUBLESIZE: + * This symbol contains the size of a double, so that the C preprocessor + * can make decisions based on it. + */ +#define DOUBLESIZE $doublesize /**/ + +/* EBCDIC: + * This symbol, if defined, indicates that this system uses + * EBCDIC encoding. + */ +#$ebcdic EBCDIC /**/ + +/* FFLUSH_NULL: + * This symbol, if defined, tells that fflush(NULL) does flush + * all pending stdio output. + */ +/* FFLUSH_ALL: + * This symbol, if defined, tells that to flush + * all pending stdio output one must loop through all + * the stdio file handles stored in an array and fflush them. + * Note that if fflushNULL is defined, fflushall will not + * even be probed for and will be left undefined. + */ +#$fflushNULL FFLUSH_NULL /**/ +#$fflushall FFLUSH_ALL /**/ + +/* Fpos_t: + * This symbol holds the type used to declare file positions in libc. + * It can be fpos_t, long, uint, etc... It may be necessary to include + * to get any typedef'ed information. + */ +#define Fpos_t $fpostype /* File position type */ + +/* Gid_t_f: + * This symbol defines the format string used for printing a Gid_t. + */ +#define Gid_t_f $gidformat /**/ + +/* Gid_t_size: + * This symbol holds the size of a Gid_t in bytes. + */ +#define Gid_t_size $gidsize /* GID size */ + +/* Gid_t: + * This symbol holds the return type of getgid() and the type of + * argument to setrgid() and related functions. Typically, + * it is the type of group ids in the kernel. It can be int, ushort, + * uid_t, etc... It may be necessary to include to get + * any typedef'ed information. + */ +#define Gid_t $gidtype /* Type for getgid(), etc... */ + /* Groups_t: * This symbol holds the type used for the second argument to * getgroups() and setgropus(). Usually, this is the same as @@ -1930,6 +2244,19 @@ sed <config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un- #define Groups_t $groupstype /* Type for 2nd arg to [sg]etgroups() */ #endif +/* DB_Prefix_t: + * This symbol contains the type of the prefix structure element + * in the header file. In older versions of DB, it was + * int, while in newer ones it is u_int32_t. + */ +/* DB_Hash_t: + * This symbol contains the type of the prefix structure element + * in the header file. In older versions of DB, it was + * int, while in newer ones it is size_t. + */ +#define DB_Hash_t $db_hashtype /**/ +#define DB_Prefix_t $db_prefixtype /**/ + /* I_GRP: * This symbol, if defined, indicates to the C program that it should * include . @@ -1941,12 +2268,54 @@ sed <config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un- #$i_grp I_GRP /**/ #$d_grpasswd GRPASSWD /**/ +/* I_ICONV: + * This symbol, if defined, indicates that exists and + * should be included. + */ +#$i_iconv I_ICONV /**/ + +/* I_INTTYPES: + * This symbol, if defined, indicates to the C program that it should + * include . + */ +#$i_inttypes I_INTTYPES /**/ + +/* I_MACH_CTHREADS: + * This symbol, if defined, indicates to the C program that it should + * include . + */ +#$i_machcthr I_MACH_CTHREADS /**/ + +/* I_MNTENT: + * This symbol, if defined, indicates that exists and + * should be included. + */ +#$i_mntent I_MNTENT /**/ + /* I_NETDB: * This symbol, if defined, indicates that exists and * should be included. */ #$i_netdb I_NETDB /**/ +/* I_NETINET_TCP: + * This symbol, if defined, indicates to the C program that it should + * include . + */ +#$i_netinettcp I_NETINET_TCP /**/ + +/* I_POLL: + * This symbol, if defined, indicates that exists and + * should be included. + */ +#$i_poll I_POLL /**/ + +/* I_PTHREAD: + * This symbol, if defined, indicates to the C program that it should + * include . + */ +#$i_pthread I_PTHREAD /**/ + /* I_PWD: * This symbol, if defined, indicates to the C program that it should * include . @@ -1993,406 +2362,326 @@ sed <config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un- #$d_pwgecos PWGECOS /**/ #$d_pwpasswd PWPASSWD /**/ -/* I_SYSUIO: - * This symbol, if defined, indicates that exists and +/* I_SHADOW: + * This symbol, if defined, indicates that exists and * should be included. */ -#$i_sysuio I_SYSUIO /**/ +#$i_shadow I_SHADOW /**/ -/* Free_t: - * This variable contains the return type of free(). It is usually - * void, but occasionally int. - */ -/* Malloc_t: - * This symbol is the type of pointer returned by malloc and realloc. +/* I_SOCKS: + * This symbol, if defined, indicates that exists and + * should be included. */ -#define Malloc_t $malloctype /**/ -#define Free_t $freetype /**/ +#$i_socks I_SOCKS /**/ -/* MYMALLOC: - * This symbol, if defined, indicates that we're using our own malloc. +/* I_SUNMATH: + * This symbol, if defined, indicates that exists and + * should be included. */ -#$d_mymalloc MYMALLOC /**/ +#$i_sunmath I_SUNMATH /**/ -/* SIG_NAME: - * This symbol contains a list of signal names in order of - * signal number. This is intended - * to be used as a static array initialization, like this: - * char *sig_name[] = { SIG_NAME }; - * The signals in the list are separated with commas, and each signal - * is surrounded by double quotes. There is no leading SIG in the signal - * name, i.e. SIGQUIT is known as "QUIT". - * Gaps in the signal numbers (up to NSIG) are filled in with NUMnn, - * etc., where nn is the actual signal number (e.g. NUM37). - * The signal number for sig_name[i] is stored in sig_num[i]. - * The last element is 0 to terminate the list with a NULL. This - * corresponds to the 0 at the end of the sig_num list. - */ -/* SIG_NUM: - * This symbol contains a list of signal numbers, in the same order as the - * SIG_NAME list. It is suitable for static array initialization, as in: - * int sig_num[] = { SIG_NUM }; - * The signals in the list are separated with commas, and the indices - * within that list and the SIG_NAME list match, so it's easy to compute - * the signal name from a number or vice versa at the price of a small - * dynamic linear lookup. - * Duplicates are allowed, but are moved to the end of the list. - * The signal number corresponding to sig_name[i] is sig_number[i]. - * if (i < NSIG) then sig_number[i] == i. - * The last element is 0, corresponding to the 0 at the end of - * the sig_name list. +/* I_SYSLOG: + * This symbol, if defined, indicates that exists and + * should be included. */ -#define SIG_NAME $sig_name_init /**/ -#define SIG_NUM $sig_num_init /**/ +#$i_syslog I_SYSLOG /**/ -/* VOIDFLAGS: - * This symbol indicates how much support of the void type is given by this - * compiler. What various bits mean: - * - * 1 = supports declaration of void - * 2 = supports arrays of pointers to functions returning void - * 4 = supports comparisons between pointers to void functions and - * addresses of void functions - * 8 = suports declaration of generic void pointers - * - * The package designer should define VOIDUSED to indicate the requirements - * of the package. This can be done either by #defining VOIDUSED before - * including config.h, or by defining defvoidused in Myinit.U. If the - * latter approach is taken, only those flags will be tested. If the - * level of void support necessary is not present, defines void to int. +/* I_SYSMODE: + * This symbol, if defined, indicates that exists and + * should be included. */ -#ifndef VOIDUSED -#define VOIDUSED $defvoidused -#endif -#define VOIDFLAGS $voidflags -#if (VOIDFLAGS & VOIDUSED) != VOIDUSED -#define void int /* is void to be avoided? */ -#define M_VOID /* Xenix strikes again */ -#endif +#$i_sysmode I_SYSMODE /**/ -/* ARCHLIB: - * This variable, if defined, holds the name of the directory in - * which the user wants to put architecture-dependent public - * library files for $package. It is most often a local directory - * such as /usr/local/lib. Programs using this variable must be - * prepared to deal with filename expansion. If ARCHLIB is the - * same as PRIVLIB, it is not defined, since presumably the - * program already searches PRIVLIB. - */ -/* ARCHLIB_EXP: - * This symbol contains the ~name expanded version of ARCHLIB, to be used - * in programs that are not prepared to deal with ~ expansion at run-time. +/* I_SYS_MOUNT: + * This symbol, if defined, indicates that exists and + * should be included. */ -#$d_archlib ARCHLIB "$archlib" /**/ -#$d_archlib ARCHLIB_EXP "$archlibexp" /**/ +#$i_sysmount I_SYS_MOUNT /**/ -/* DLSYM_NEEDS_UNDERSCORE: - * This symbol, if defined, indicates that we need to prepend an - * underscore to the symbol name before calling dlsym(). This only - * makes sense if you *have* dlsym, which we will presume is the - * case if you're using dl_dlopen.xs. +/* I_SYS_STATFS: + * This symbol, if defined, indicates that exists. */ -#$d_dlsymun DLSYM_NEEDS_UNDERSCORE /**/ +#$i_sysstatfs I_SYS_STATFS /**/ -/* HAS_ENDSPENT: - * This symbol, if defined, indicates that the endspent system call is - * available to finalize the scan of SysV shadow password entries. +/* I_SYS_STATVFS: + * This symbol, if defined, indicates that exists and + * should be included. */ -#$d_endspent HAS_ENDSPENT /**/ +#$i_sysstatvfs I_SYS_STATVFS /**/ -/* HAS_FSEEKO: - * This symbol, if defined, indicates that the fseeko routine is - * available to fseek beyond 32 bits (useful for ILP32 hosts). +/* I_SYSUIO: + * This symbol, if defined, indicates that exists and + * should be included. */ -#$d_fseeko HAS_FSEEKO /**/ +#$i_sysuio I_SYSUIO /**/ -/* HAS_FTELLO: - * This symbol, if defined, indicates that the ftello routine is - * available to ftell from beyond 32 bits (useful for ILP32 hosts). +/* I_SYSUTSNAME: + * This symbol, if defined, indicates that exists and + * should be included. */ -#$d_ftello HAS_FTELLO /**/ +#$i_sysutsname I_SYSUTSNAME /**/ -/* HAS_GETMNTENT: - * This symbol, if defined, indicates that the getmntent routine is - * available to iterate through mounted file systems. +/* I_SYS_VFS: + * This symbol, if defined, indicates that exists and + * should be included. */ -#$d_getmntent HAS_GETMNTENT /**/ +#$i_sysvfs I_SYS_VFS /**/ -/* HAS_GETSPENT: - * This symbol, if defined, indicates that the getspent system call is - * available to retrieve SysV shadow password entries sequentially. +/* I_TIME: + * This symbol, if defined, indicates to the C program that it should + * include . */ -#$d_getspent HAS_GETSPENT /**/ - -/* HAS_GETSPNAM: - * This symbol, if defined, indicates that the getspnam system call is - * available to retrieve SysV shadow password entries by name. +/* I_SYS_TIME: + * This symbol, if defined, indicates to the C program that it should + * include . */ -#$d_getspnam HAS_GETSPNAM /**/ - -/* HAS_HASMNTOPT: - * This symbol, if defined, indicates that the hasmntopt routine is - * available to query the mount options of file systems. +/* I_SYS_TIME_KERNEL: + * This symbol, if defined, indicates to the C program that it should + * include with KERNEL defined. */ -#$d_hasmntopt HAS_HASMNTOPT /**/ +#$i_time I_TIME /**/ +#$i_systime I_SYS_TIME /**/ +#$i_systimek I_SYS_TIME_KERNEL /**/ -/* HAS_MADVISE: - * This symbol, if defined, indicates that the madvise system call is - * available to map a file into memory. +/* I_USTAT: + * This symbol, if defined, indicates that exists and + * should be included. */ -#$d_madvise HAS_MADVISE /**/ +#$i_ustat I_USTAT /**/ -/* HAS_MPROTECT: - * This symbol, if defined, indicates that the mprotect system call is - * available to modify the access protection of a memory mapped file. +/* PERL_INC_VERSION_LIST: + * This variable specifies the list of subdirectories in over + * which perl.c:incpush() and lib/lib.pm will automatically + * search when adding directories to @INC, in a format suitable + * for a C initialization string. See the inc_version_list entry + * in Porting/Glossary for more details. */ -#$d_mprotect HAS_MPROTECT /**/ +#define PERL_INC_VERSION_LIST $inc_version_list_init /**/ -/* HAS_READV: - * This symbol, if defined, indicates that the readv routine is - * available to do gather reads. You will also need - * and there I_SYSUIO. +/* INSTALL_USR_BIN_PERL: + * This symbol, if defined, indicates that Perl is to be installed + * also as /usr/bin/perl. */ -#$d_readv HAS_READV /**/ +#$installusrbinperl INSTALL_USR_BIN_PERL /**/ -/* HAS_SETSPENT: - * This symbol, if defined, indicates that the setspent system call is - * available to initialize the scan of SysV shadow password entries. +/* PERL_PRIfldbl: + * This symbol, if defined, contains the string used by stdio to + * format long doubles (format 'f') for output. */ -#$d_setspent HAS_SETSPENT /**/ - -/* USE_SFIO: - * This symbol, if defined, indicates that sfio should - * be used. +/* PERL_PRIgldbl: + * This symbol, if defined, contains the string used by stdio to + * format long doubles (format 'g') for output. */ -#$d_sfio USE_SFIO /**/ +#$d_PRIfldbl PERL_PRIfldbl $sPRIfldbl /**/ +#$d_PRIgldbl PERL_PRIgldbl $sPRIgldbl /**/ -/* HAS_FSTATFS: - * This symbol, if defined, indicates that the fstatfs routine is - * available to stat filesystems of file descriptors. +/* Off_t: + * This symbol holds the type used to declare offsets in the kernel. + * It can be int, long, off_t, etc... It may be necessary to include + * to get any typedef'ed information. */ -/* HAS_STRUCT_STATFS_FLAGS: - * This symbol, if defined, indicates that the struct statfs - * does have the f_flags member containing the mount flags of - * the filesystem holding the file. - * This kind of struct statfs is coming from sys/mount.h (BSD), - * not from sys/statfs.h (SYSV). +/* LSEEKSIZE: + * This symbol holds the number of bytes used by the Off_t. */ -#$d_fstatfs HAS_FSTATFS /**/ -#$d_statfsflags HAS_STRUCT_STATFS_FLAGS /**/ +/* Off_t_size: + * This symbol holds the number of bytes used by the Off_t. + */ +#define Off_t $lseektype /* type */ +#define LSEEKSIZE $lseeksize /* size */ +#define Off_t_size $lseeksize /* size */ -/* HAS_FSTATVFS: - * This symbol, if defined, indicates that the fstatvfs routine is - * available to stat filesystems of file descriptors. +/* Free_t: + * This variable contains the return type of free(). It is usually + * void, but occasionally int. */ -#$d_fstatvfs HAS_FSTATVFS /**/ +/* Malloc_t: + * This symbol is the type of pointer returned by malloc and realloc. + */ +#define Malloc_t $malloctype /**/ +#define Free_t $freetype /**/ -/* HAS_TELLDIR_PROTO: - * This symbol, if defined, indicates that the system provides - * a prototype for the telldir() function. Otherwise, it is up - * to the program to supply one. A good guess is - * extern long telldir (DIR*); +/* MYMALLOC: + * This symbol, if defined, indicates that we're using our own malloc. */ -#$d_telldirproto HAS_TELLDIR_PROTO /**/ +#$d_mymalloc MYMALLOC /**/ -/* HAS_WRITEV: - * This symbol, if defined, indicates that the writev routine is - * available to do scatter writes. +/* Mode_t: + * This symbol holds the type used to declare file modes + * for systems calls. It is usually mode_t, but may be + * int or unsigned short. It may be necessary to include + * to get any typedef'ed information. */ -#$d_writev HAS_WRITEV /**/ +#define Mode_t $modetype /* file mode parameter for system calls */ -/* HAS_DBMINIT64: - * This symbol, if defined, indicates that the dbminit64 routine is - * available to open dbm files larger than 2 gigabytes. +/* VAL_O_NONBLOCK: + * This symbol is to be used during open() or fcntl(F_SETFL) to turn on + * non-blocking I/O for the file descriptor. Note that there is no way + * back, i.e. you cannot turn it blocking again this way. If you wish to + * alternatively switch between blocking and non-blocking, use the + * ioctl(FIOSNBIO) call instead, but that is not supported by all devices. */ -/* HAS_DBMCLOSE64: - * This symbol, if defined, indicates that the dbmclose64 routine is - * available to close dbm files larger than 2 gigabytes. +/* VAL_EAGAIN: + * This symbol holds the errno error code set by read() when no data was + * present on the non-blocking file descriptor. */ -/* HAS_FETCH64: - * This symbol, if defined, indicates that the fetch64 routine is - * available to fetch from dbm files larger than 2 gigabytes. +/* RD_NODATA: + * This symbol holds the return code from read() when no data is present + * on the non-blocking file descriptor. Be careful! If EOF_NONBLOCK is + * not defined, then you can't distinguish between no data and EOF by + * issuing a read(). You'll have to find another way to tell for sure! */ -/* HAS_STORE64: - * This symbol, if defined, indicates that the store64 routine is - * available to store to dbm files larger than 2 gigabytes. +/* EOF_NONBLOCK: + * This symbol, if defined, indicates to the C program that a read() on + * a non-blocking file descriptor will return 0 on EOF, and not the value + * held in RD_NODATA (-1 usually, in that case!). */ -/* HAS_DELETE64: - * This symbol, if defined, indicates that the delete64 routine is - * available to delete from dbm files larger than 2 gigabytes. +#define VAL_O_NONBLOCK $o_nonblock +#define VAL_EAGAIN $eagain +#define RD_NODATA $rd_nodata +#$d_eofnblk EOF_NONBLOCK + +/* Netdb_host_t: + * This symbol holds the type used for the 1st argument + * to gethostbyaddr(). */ -/* HAS_FIRSTKEY64: - * This symbol, if defined, indicates that the firstkey64 routine is - * available to firstkey in dbm files larger than 2 gigabytes. +/* Netdb_hlen_t: + * This symbol holds the type used for the 2nd argument + * to gethostbyaddr(). */ -/* HAS_NEXTKEY64: - * This symbol, if defined, indicates that the nextkey64 routine is - * available to nextkey in dbm files larger than 2 gigabytes. +/* Netdb_name_t: + * This symbol holds the type used for the argument to + * gethostbyname(). */ -#$d_dbminit64 HAS_DBMINIT64 /**/ -#$d_dbmclose64 HAS_DBMCLOSE64 /**/ -#$d_fetch64 HAS_FETCH64 /**/ -#$d_store64 HAS_STORE64 /**/ -#$d_delete64 HAS_DELETE64 /**/ -#$d_firstkey64 HAS_FIRSTKEY64 /**/ -#$d_nextkey64 HAS_NEXTKEY64 /**/ - -/* USE_DYNAMIC_LOADING: - * This symbol, if defined, indicates that dynamic loading of - * some sort is available. +/* Netdb_net_t: + * This symbol holds the type used for the 1st argument to + * getnetbyaddr(). */ -#$usedl USE_DYNAMIC_LOADING /**/ +#define Netdb_host_t $netdb_host_type /**/ +#define Netdb_hlen_t $netdb_hlen_type /**/ +#define Netdb_name_t $netdb_name_type /**/ +#define Netdb_net_t $netdb_net_type /**/ -/* FFLUSH_NULL: - * This symbol, if defined, tells that fflush(NULL) does flush - * all pending stdio output. +/* IVTYPE: + * This symbol defines the C type used for Perl's IV. */ -/* FFLUSH_ALL: - * This symbol, if defined, tells that to flush - * all pending stdio output one must loop through all - * the stdio file handles stored in an array and fflush them. - * Note that if fflushNULL is defined, fflushall will not - * even be probed for and will be left undefined. +/* UVTYPE: + * This symbol defines the C type used for Perl's UV. */ -#$fflushNULL FFLUSH_NULL /**/ -#$fflushall FFLUSH_ALL /**/ - -/* DB_Prefix_t: - * This symbol contains the type of the prefix structure element - * in the header file. In older versions of DB, it was - * int, while in newer ones it is u_int32_t. +/* I8TYPE: + * This symbol defines the C type used for Perl's I8. */ -/* DB_Hash_t: - * This symbol contains the type of the prefix structure element - * in the header file. In older versions of DB, it was - * int, while in newer ones it is size_t. +/* U8TYPE: + * This symbol defines the C type used for Perl's U8. */ -#define DB_Hash_t $db_hashtype /**/ -#define DB_Prefix_t $db_prefixtype /**/ - -/* I_INTTYPES: - * This symbol, if defined, indicates to the C program that it should - * include . +/* I16TYPE: + * This symbol defines the C type used for Perl's I16. */ -/* HAS_INT64_T: - * This symbol will defined if the C compiler supports int64_t. - * Usually the needs to be included, but sometimes - * is enough. +/* U16TYPE: + * This symbol defines the C type used for Perl's U16. */ -#$i_inttypes I_INTTYPES /**/ -#$d_int64t HAS_INT64_T /**/ - -/* I_MNTENT: - * This symbol, if defined, indicates that exists and - * should be included. +/* I32TYPE: + * This symbol defines the C type used for Perl's I32. */ -#$i_mntent I_MNTENT /**/ - -/* I_NETINET_TCP: - * This symbol, if defined, indicates to the C program that it should - * include . +/* U32TYPE: + * This symbol defines the C type used for Perl's U32. */ -#$i_netinettcp I_NETINET_TCP /**/ - -/* I_POLL: - * This symbol, if defined, indicates that exists and - * should be included. +/* I64TYPE: + * This symbol defines the C type used for Perl's I64. */ -#$i_poll I_POLL /**/ - -/* I_SHADOW: - * This symbol, if defined, indicates that exists and - * should be included. +/* U64TYPE: + * This symbol defines the C type used for Perl's U64. */ -#$i_shadow I_SHADOW /**/ - -/* I_SYS_MMAN: - * This symbol, if defined, indicates that exists and - * should be included. +/* NVTYPE: + * This symbol defines the C type used for Perl's NV. */ -#$i_sysmman I_SYS_MMAN /**/ - -/* I_SYS_MOUNT: - * This symbol, if defined, indicates that exists and - * should be included. +/* IVSIZE: + * This symbol contains the sizeof(IV). */ -#$i_sysmount I_SYS_MOUNT /**/ - -/* I_SYS_STATVFS: - * This symbol, if defined, indicates that exists and - * should be included. +/* UVSIZE: + * This symbol contains the sizeof(UV). */ -#$i_sysstatvfs I_SYS_STATVFS /**/ - -/* INSTALL_USR_BIN_PERL: - * This symbol, if defined, indicates that Perl is to be installed - * also as /usr/bin/perl. +/* I8SIZE: + * This symbol contains the sizeof(I8). */ -#$installusrbinperl INSTALL_USR_BIN_PERL /**/ - -/* HAS_FSTAT64: - * This symbol, if defined, indicates that the fstat64 routine is - * available to stat files (fds) larger than 2 gigabytes. +/* U8SIZE: + * This symbol contains the sizeof(U8). + */ +/* I16SIZE: + * This symbol contains the sizeof(I16). */ -/* HAS_FTRUNCATE64: - * This symbol, if defined, indicates that the ftruncate64 routine is - * available to tell files larger than 2 gigabytes. +/* U16SIZE: + * This symbol contains the sizeof(U16). */ -/* HAS_LSEEK64: - * This symbol, if defined, indicates that the lseek64 routine is - * available to seek files larger than 2 gigabytes. +/* I32SIZE: + * This symbol contains the sizeof(I32). */ -/* HAS_LSTAT64: - * This symbol, if defined, indicates that the lstat64 routine is - * available to stat files (symlinks) larger than 2 gigabytes. +/* U32SIZE: + * This symbol contains the sizeof(U32). */ -/* HAS_OPEN64: - * This symbol, if defined, indicates that the open64 routine is - * available to open files larger than 2 gigabytes. +/* I64SIZE: + * This symbol contains the sizeof(I64). */ -/* HAS_OPENDIR64: - * This symbol, if defined, indicates that the opendir64 routine is - * available to opendir files larger than 2 gigabytes. +/* U64SIZE: + * This symbol contains the sizeof(U64). */ -/* HAS_READDIR64: - * This symbol, if defined, indicates that the readdir64 routine is - * available to readdir files larger than 2 gigabytes. +/* NV_PRESERVES_UV: + * This symbol, if defined, indicates that a variable of type NVTYPE + * can preserve all the bit of a variable of type UVSIZE. */ -/* HAS_SEEKDIR64: - * This symbol, if defined, indicates that the seekdir64 routine is - * available to seekdir files larger than 2 gigabytes. +#define IVTYPE $ivtype /**/ +#define UVTYPE $uvtype /**/ +#define I8TYPE $i8type /**/ +#define U8TYPE $u8type /**/ +#define I16TYPE $i16type /**/ +#define U16TYPE $u16type /**/ +#define I32TYPE $i32type /**/ +#define U32TYPE $u32type /**/ +#ifdef HAS_QUAD +#define I64TYPE $i64type /**/ +#define U64TYPE $u64type /**/ +#endif +#define NVTYPE $nvtype /**/ +#define IVSIZE $ivsize /**/ +#define UVSIZE $uvsize /**/ +#define I8SIZE $i8size /**/ +#define U8SIZE $u8size /**/ +#define I16SIZE $i16size /**/ +#define U16SIZE $u16size /**/ +#define I32SIZE $i32size /**/ +#define U32SIZE $u32size /**/ +#ifdef HAS_QUAD +#define I64SIZE $i64size /**/ +#define U64SIZE $u64size /**/ +#endif +#$d_nv_preserves_uv NV_PRESERVES_UV + +/* IVdf: + * This symbol defines the format string used for printing a Perl IV + * as a signed decimal integer. */ -/* HAS_STAT64: - * This symbol, if defined, indicates that the stat64 routine is - * available to stat files larger than 2 gigabytes. +/* UVuf: + * This symbol defines the format string used for printing a Perl UV + * as an unsigned decimal integer. */ -/* HAS_TELLDIR64: - * This symbol, if defined, indicates that the telldir64 routine is - * available to telldir files larger than 2 gigabytes. +/* UVof: + * This symbol defines the format string used for printing a Perl UV + * as an unsigned octal integer. */ -/* HAS_TRUNCATE64: - * This symbol, if defined, indicates that the truncate64 routine is - * available to truncate files larger than 2 gigabytes. +/* UVxf: + * This symbol defines the format string used for printing a Perl UV + * as an unsigned hexadecimal integer. */ -/* HAS_OFF64_T: - * This symbol will be defined if the C compiler supports off64_t. +#define IVdf $ivdformat /**/ +#define UVuf $uvuformat /**/ +#define UVof $uvoformat /**/ +#define UVxf $uvxformat /**/ + +/* Pid_t: + * This symbol holds the type used to declare process ids in the kernel. + * It can be int, uint, pid_t, etc... It may be necessary to include + * to get any typedef'ed information. */ -/* HAS_STRUCT_DIRENT64: - * This symbol will be defined if the C compiler supports struct dirent64. - */ -#$d_fstat64 HAS_FSTAT64 /**/ -#$d_ftruncate64 HAS_FTRUNCATE64 /**/ -#$d_lseek64 HAS_LSEEK64 /**/ -#$d_lstat64 HAS_LSTAT64 /**/ -#$d_open64 HAS_OPEN64 /**/ -#$d_opendir64 HAS_OPENDIR64 /**/ -#$d_readdir64 HAS_READDIR64 /**/ -#$d_seekdir64 HAS_SEEKDIR64 /**/ -#$d_stat64 HAS_STAT64 /**/ -#$d_telldir64 HAS_TELLDIR64 /**/ -#$d_truncate64 HAS_TRUNCATE64 /**/ -#$d_off64_t HAS_OFF64_T /**/ -#$d_dirent64_s HAS_STRUCT_DIRENT64 /**/ +#define Pid_t $pidtype /* PID type */ /* PRIVLIB: * This symbol contains the name of the private library for this package. @@ -2407,6 +2696,39 @@ sed <config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un- #define PRIVLIB "$privlib" /**/ #define PRIVLIB_EXP "$privlibexp" /**/ +/* PTRSIZE: + * This symbol contains the size of a pointer, so that the C preprocessor + * can make decisions based on it. It will be sizeof(void *) if + * the compiler supports (void *); otherwise it will be + * sizeof(char *). + */ +#define PTRSIZE $ptrsize /**/ + +/* Drand01: + * This macro is to be used to generate uniformly distributed + * random numbers over the range [0., 1.[. You may have to supply + * an 'extern double drand48();' in your program since SunOS 4.1.3 + * doesn't provide you with anything relevant in it's headers. + * See HAS_DRAND48_PROTO. + */ +/* Rand_seed_t: + * This symbol defines the type of the argument of the + * random seed function. + */ +/* seedDrand01: + * This symbol defines the macro to be used in seeding the + * random number generator (see Drand01). + */ +/* RANDBITS: + * This symbol indicates how many bits are produced by the + * function used to generate normalized random numbers. + * Values include 15, 16, 31, and 48. + */ +#define Drand01() $drand01 /**/ +#define Rand_seed_t $randseedtype /**/ +#define seedDrand01(x) $seedfunc((Rand_seed_t)x) /**/ +#define RANDBITS $randbits /**/ + /* SELECT_MIN_BITS: * This symbol holds the minimum number of bits operated by select. * That is, if you do select(n, ...), how many bits at least will be @@ -2414,7 +2736,46 @@ sed <config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un- * is either n or 32*ceil(n/32), especially many little-endians do * the latter. This is only useful if you have select(), naturally. */ -#define SELECT_MIN_BITS $selectminbits /**/ +#define SELECT_MIN_BITS $selectminbits /**/ + +/* Select_fd_set_t: + * This symbol holds the type used for the 2nd, 3rd, and 4th + * arguments to select. Usually, this is 'fd_set *', if HAS_FD_SET + * is defined, and 'int *' otherwise. This is only useful if you + * have select(), of course. + */ +#define Select_fd_set_t $selecttype /**/ + +/* SIG_NAME: + * This symbol contains a list of signal names in order of + * signal number. This is intended + * to be used as a static array initialization, like this: + * char *sig_name[] = { SIG_NAME }; + * The signals in the list are separated with commas, and each signal + * is surrounded by double quotes. There is no leading SIG in the signal + * name, i.e. SIGQUIT is known as "QUIT". + * Gaps in the signal numbers (up to NSIG) are filled in with NUMnn, + * etc., where nn is the actual signal number (e.g. NUM37). + * The signal number for sig_name[i] is stored in sig_num[i]. + * The last element is 0 to terminate the list with a NULL. This + * corresponds to the 0 at the end of the sig_num list. + */ +/* SIG_NUM: + * This symbol contains a list of signal numbers, in the same order as the + * SIG_NAME list. It is suitable for static array initialization, as in: + * int sig_num[] = { SIG_NUM }; + * The signals in the list are separated with commas, and the indices + * within that list and the SIG_NAME list match, so it's easy to compute + * the signal name from a number or vice versa at the price of a small + * dynamic linear lookup. + * Duplicates are allowed, but are moved to the end of the list. + * The signal number corresponding to sig_name[i] is sig_number[i]. + * if (i < NSIG) then sig_number[i] == i. + * The last element is 0, corresponding to the 0 at the end of + * the sig_name list. + */ +#define SIG_NAME $sig_name_init /**/ +#define SIG_NUM $sig_num_init /**/ /* SITEARCH: * This symbol contains the name of the private library for this package. @@ -2422,8 +2783,10 @@ sed <config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un- * execution path, but it should be accessible by the world. The program * should be prepared to do ~ expansion. * The standard distribution will put nothing in this directory. - * Individual sites may place their own extensions and modules in - * this directory. + * After perl has been installed, users may install their own local + * architecture-dependent modules in this directory with + * MakeMaker Makefile.PL + * or equivalent. See INSTALL for details. */ /* SITEARCH_EXP: * This symbol contains the ~name expanded version of SITEARCH, to be used @@ -2438,15 +2801,41 @@ sed <config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un- * execution path, but it should be accessible by the world. The program * should be prepared to do ~ expansion. * The standard distribution will put nothing in this directory. - * Individual sites may place their own extensions and modules in - * this directory. + * After perl has been installed, users may install their own local + * architecture-independent modules in this directory with + * MakeMaker Makefile.PL + * or equivalent. See INSTALL for details. */ /* SITELIB_EXP: * This symbol contains the ~name expanded version of SITELIB, to be used * in programs that are not prepared to deal with ~ expansion at run-time. */ +/* SITELIB_STEM: + * This define is SITELIB_EXP with any trailing version-specific component + * removed. The elements in inc_version_list (inc_version_list.U) can + * be tacked onto this variable to generate a list of directories to search. + */ #define SITELIB "$sitelib" /**/ #define SITELIB_EXP "$sitelibexp" /**/ +#define SITELIB_STEM "$sitelib_stem" /**/ + +/* Size_t: + * This symbol holds the type used to declare length parameters + * for string functions. It is usually size_t, but may be + * unsigned long, int, etc. It may be necessary to include + * to get any typedef'ed information. + */ +#define Size_t $sizetype /* length paramater for string functions */ + +/* SSize_t: + * This symbol holds the type used by functions that return + * a count of bytes or an error condition. It must be a signed type. + * It is usually ssize_t, but may be long or int, etc. + * It may be necessary to include or + * to get any typedef'ed information. + * We will pick a type such that sizeof(SSize_t) == sizeof(Size_t). + */ +#define SSize_t $ssizetype /* signed count of bytes */ /* STARTPERL: * This variable contains the string to put in front of a perl @@ -2455,52 +2844,6 @@ sed <config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un- */ #define STARTPERL "$startperl" /**/ -/* HAS_FGETPOS64: - * This symbol, if defined, indicates that the fgetpos64 routine is - * available to getpos files larger than 2 gigabytes. - */ -/* HAS_FOPEN64: - * This symbol, if defined, indicates that the fopen64 routine is - * available to open files larger than 2 gigabytes. - */ -/* HAS_FREOPEN64: - * This symbol, if defined, indicates that the freopen64 routine is - * available to reopen files larger than 2 gigabytes. - */ -/* HAS_FSEEK64: - * This symbol, if defined, indicates that the fseek64 routine is - * available to seek files larger than 2 gigabytes. - */ -/* HAS_FSEEKO64: - * This symbol, if defined, indicates that the fseeko64 routine is - * available to seek files larger than 2 gigabytes. - */ -/* HAS_FSETPOS64: - * This symbol, if defined, indicates that the fsetpos64 routine is - * available to setpos files larger than 2 gigabytes. - */ -/* HAS_FTELL64: - * This symbol, if defined, indicates that the ftell64 routine is - * available to tell files larger than 2 gigabytes. - */ -/* HAS_FTELLO64: - * This symbol, if defined, indicates that the ftello64 routine is - * available to tell files larger than 2 gigabytes. - */ -/* HAS_TMPFILE64: - * This symbol, if defined, indicates that the tmpfile64 routine is - * available to tmpfile files larger than 2 gigabytes. - */ -#$d_fgetpos64 HAS_FGETPOS64 /**/ -#$d_fopen64 HAS_FOPEN64 /**/ -#$d_freopen64 HAS_FREOPEN64 /**/ -#$d_fseek64 HAS_FSEEK64 /**/ -#$d_fseeko64 HAS_FSEEKO64 /**/ -#$d_fsetpos64 HAS_FSETPOS64 /**/ -#$d_ftell64 HAS_FTELL64 /**/ -#$d_ftello64 HAS_FTELLO64 /**/ -#$d_tmpfile64 HAS_TMPFILE64 /**/ - /* HAS_STDIO_STREAM_ARRAY: * This symbol, if defined, tells that there is an array * holding the stdio streams. @@ -2512,219 +2855,220 @@ sed <config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un- #$d_stdio_stream_array HAS_STDIO_STREAM_ARRAY /**/ #define STDIO_STREAM_ARRAY $stdio_stream_array -/* USE_64_BITS: - * This symbol, if defined, indicates that 64-bit interfaces should - * be used when available. If not defined, the native default interfaces - * will be used (be they 32 or 64 bits). - */ -#$use64bits USE_64_BITS /**/ - -/* MULTIPLICITY: - * This symbol, if defined, indicates that Perl should - * be built to use multiplicity. - */ -#$usemultiplicity MULTIPLICITY /**/ - -/* USE_PERLIO: - * This symbol, if defined, indicates that the PerlIO abstraction should - * be used throughout. If not defined, stdio should be - * used in a fully backward compatible manner. +/* Uid_t_f: + * This symbol defines the format string used for printing a Uid_t. */ -#$useperlio USE_PERLIO /**/ +#define Uid_t_f $uidformat /**/ -/* HAS_DRAND48_PROTO: - * This symbol, if defined, indicates that the system provides - * a prototype for the drand48() function. Otherwise, it is up - * to the program to supply one. A good guess is - * extern double drand48 (void); +/* Uid_t_size: + * This symbol holds the size of a Uid_t in bytes. */ -#$d_drand48proto HAS_DRAND48_PROTO /**/ +#define Uid_t_size $uidsize /* UID size */ -/* HAS_GETHOST_PROTOS: - * This symbol, if defined, indicates that includes - * prototypes for gethostent(), gethostbyname(), and - * gethostbyaddr(). Otherwise, it is up to the program to guess - * them. See netdbtype.U for probing for various Netdb_xxx_t types. +/* Uid_t: + * This symbol holds the type used to declare user ids in the kernel. + * It can be int, ushort, uid_t, etc... It may be necessary to include + * to get any typedef'ed information. */ -#$d_gethostprotos HAS_GETHOST_PROTOS /**/ +#define Uid_t $uidtype /* UID type */ -/* HAS_GETNET_PROTOS: - * This symbol, if defined, indicates that includes - * prototypes for getnetent(), getnetbyname(), and - * getnetbyaddr(). Otherwise, it is up to the program to guess - * them. See netdbtype.U for probing for various Netdb_xxx_t types. - */ -#$d_getnetprotos HAS_GETNET_PROTOS /**/ +/* USE_64_BIT_INT: + * This symbol, if defined, indicates that 64-bit integers should + * be used when available. If not defined, the native integers + * will be employed (be they 32 or 64 bits). The minimal possible + * 64-bitness is used, just enough to get 64-bit integers into Perl. + * This may mean using for example "long longs", while your memory + * may still be limited to 2 gigabytes. + */ +/* USE_64_BIT_ALL: + * This symbol, if defined, indicates that 64-bit integers should + * be used when available. If not defined, the native integers + * will be used (be they 32 or 64 bits). The maximal possible + * 64-bitness is employed: LP64 or ILP64, meaning that you will + * be able to use more than 2 gigabytes of memory. This mode is + * even more binary incompatible than USE_64_BIT_INT. You may not + * be able to run the resulting executable in a 32-bit CPU at all or + * you may need at least to reboot your OS to 64-bit mode. + */ +#ifndef USE_64_BIT_INT +#$use64bitint USE_64_BIT_INT /**/ +#endif -/* HAS_GETPROTO_PROTOS: - * This symbol, if defined, indicates that includes - * prototypes for getprotoent(), getprotobyname(), and - * getprotobyaddr(). Otherwise, it is up to the program to guess - * them. See netdbtype.U for probing for various Netdb_xxx_t types. - */ -#$d_getprotoprotos HAS_GETPROTO_PROTOS /**/ +#ifndef USE_64_BIT_ALL +#$use64bitall USE_64_BIT_ALL /**/ +#endif -/* HAS_GETSERV_PROTOS: - * This symbol, if defined, indicates that includes - * prototypes for getservent(), getservbyname(), and - * getservbyaddr(). Otherwise, it is up to the program to guess - * them. See netdbtype.U for probing for various Netdb_xxx_t types. +/* USE_LARGE_FILES: + * This symbol, if defined, indicates that large file support + * should be used when available. */ -#$d_getservprotos HAS_GETSERV_PROTOS /**/ +#ifndef USE_LARGE_FILES +#$uselargefiles USE_LARGE_FILES /**/ +#endif -/* Netdb_host_t: - * This symbol holds the type used for the 1st argument - * to gethostbyaddr(). - */ -/* Netdb_hlen_t: - * This symbol holds the type used for the 2nd argument - * to gethostbyaddr(). - */ -/* Netdb_name_t: - * This symbol holds the type used for the argument to - * gethostbyname(). - */ -/* Netdb_net_t: - * This symbol holds the type used for the 1st argument to - * getnetbyaddr(). +/* USE_LONG_DOUBLE: + * This symbol, if defined, indicates that long doubles should + * be used when available. */ -#define Netdb_host_t $netdb_host_type /**/ -#define Netdb_hlen_t $netdb_hlen_type /**/ -#define Netdb_name_t $netdb_name_type /**/ -#define Netdb_net_t $netdb_net_type /**/ +#ifndef USE_LONG_DOUBLE +#$uselongdouble USE_LONG_DOUBLE /**/ +#endif -/* Select_fd_set_t: - * This symbol holds the type used for the 2nd, 3rd, and 4th - * arguments to select. Usually, this is 'fd_set *', if HAS_FD_SET - * is defined, and 'int *' otherwise. This is only useful if you - * have select(), of course. +/* USE_MORE_BITS: + * This symbol, if defined, indicates that 64-bit interfaces and + * long doubles should be used when available. */ -#define Select_fd_set_t $selecttype /**/ +#ifndef USE_MORE_BITS +#$usemorebits USE_MORE_BITS /**/ +#endif -/* ARCHNAME: - * This symbol holds a string representing the architecture name. - * It may be used to construct an architecture-dependant pathname - * where library files may be held under a private library, for - * instance. +/* MULTIPLICITY: + * This symbol, if defined, indicates that Perl should + * be built to use multiplicity. */ -#define ARCHNAME "$archname" /**/ +#ifndef MULTIPLICITY +#$usemultiplicity MULTIPLICITY /**/ +#endif -/* OLD_PTHREAD_CREATE_JOINABLE: - * This symbol, if defined, indicates how to create pthread - * in joinable (aka undetached) state. NOTE: not defined - * if pthread.h already has defined PTHREAD_CREATE_JOINABLE - * (the new version of the constant). - * If defined, known values are PTHREAD_CREATE_UNDETACHED - * and __UNDETACHED. +/* USE_PERLIO: + * This symbol, if defined, indicates that the PerlIO abstraction should + * be used throughout. If not defined, stdio should be + * used in a fully backward compatible manner. */ -#$d_old_pthread_create_joinable OLD_PTHREAD_CREATE_JOINABLE $old_pthread_create_joinable /**/ +#ifndef USE_PERLIO +#$useperlio USE_PERLIO /**/ +#endif -/* HAS_PTHREAD_YIELD: - * This symbol, if defined, indicates that the pthread_yield - * routine is available to yield the execution of the current - * thread. sched_yield is preferable to pthread_yield. - */ -/* SCHED_YIELD: - * This symbol defines the way to yield the execution of - * the current thread. Known ways are sched_yield, - * pthread_yield, and pthread_yield with NULL. - */ -/* HAS_SCHED_YIELD: - * This symbol, if defined, indicates that the sched_yield - * routine is available to yield the execution of the current - * thread. sched_yield is preferable to pthread_yield. +/* USE_SOCKS: + * This symbol, if defined, indicates that Perl should + * be built to use socks. */ -#$d_pthread_yield HAS_PTHREAD_YIELD /**/ -#define SCHED_YIELD $sched_yield /**/ -#$d_sched_yield HAS_SCHED_YIELD /**/ +#ifndef USE_SOCKS +#$usesocks USE_SOCKS /**/ +#endif -/* I_MACH_CTHREADS: - * This symbol, if defined, indicates to the C program that it should - * include . +/* USE_ITHREADS: + * This symbol, if defined, indicates that Perl should be built to + * use the interpreter-based threading implementation. */ -#$i_machcthr I_MACH_CTHREADS /**/ - -/* USE_THREADS: - * This symbol, if defined, indicates that Perl should - * be built to use threads. +/* USE_5005THREADS: + * This symbol, if defined, indicates that Perl should be built to + * use the 5.005-based threading implementation. */ /* OLD_PTHREADS_API: * This symbol, if defined, indicates that Perl should * be built to use the old draft POSIX threads API. */ -#$usethreads USE_THREADS /**/ +#$use5005threads USE_5005THREADS /**/ +#$useithreads USE_ITHREADS /**/ +#if defined(USE_5005THREADS) && !defined(USE_ITHREADS) +#define USE_THREADS /* until src is revised*/ +#endif #$d_oldpthreads OLD_PTHREADS_API /**/ -/* Time_t: - * This symbol holds the type returned by time(). It can be long, - * or time_t on BSD sites (in which case should be - * included). - */ -#define Time_t $timetype /* Time type */ - -/* HAS_TIMES: - * This symbol, if defined, indicates that the times() routine exists. - * Note that this became obsolete on some systems (SUNOS), which now - * use getrusage(). It may be necessary to include . - */ -#$d_times HAS_TIMES /**/ - -/* Fpos_t: - * This symbol holds the type used to declare file positions in libc. - * It can be fpos_t, long, uint, etc... It may be necessary to include - * to get any typedef'ed information. - */ -#define Fpos_t $fpostype /* File position type */ - -/* Gid_t: - * This symbol holds the return type of getgid() and the type of - * argument to setrgid() and related functions. Typically, - * it is the type of group ids in the kernel. It can be int, ushort, - * uid_t, etc... It may be necessary to include to get - * any typedef'ed information. +/* PERL_VENDORARCH_EXP: + * This symbol contains the ~name expanded version of PERL_VENDORARCH, to be used + * in programs that are not prepared to deal with ~ expansion at run-time. */ -#define Gid_t $gidtype /* Type for getgid(), etc... */ +#$d_vendorarch PERL_VENDORARCH_EXP "$vendorarchexp" /**/ -/* Off_t: - * This symbol holds the type used to declare offsets in the kernel. - * It can be int, long, off_t, etc... It may be necessary to include - * to get any typedef'ed information. +/* PERL_VENDORLIB_EXP: + * This symbol contains the ~name expanded version of VENDORLIB, to be used + * in programs that are not prepared to deal with ~ expansion at run-time. */ -/* LSEEKSIZE: - * This symbol holds the number of bytes used by the Off_t. +/* PERL_VENDORLIB_STEM: + * This define is PERL_VENDORLIB_EXP with any trailing version-specific component + * removed. The elements in inc_version_list (inc_version_list.U) can + * be tacked onto this variable to generate a list of directories to search. */ -#define Off_t $lseektype /* type */ -#define LSEEKSIZE $lseeksize /* size */ +#$d_vendorlib PERL_VENDORLIB_EXP "$vendorlibexp" /**/ +#$d_vendorlib PERL_VENDORLIB_STEM "$vendorlib_stem" /**/ -/* Mode_t: - * This symbol holds the type used to declare file modes - * for systems calls. It is usually mode_t, but may be - * int or unsigned short. It may be necessary to include - * to get any typedef'ed information. +/* VOIDFLAGS: + * This symbol indicates how much support of the void type is given by this + * compiler. What various bits mean: + * + * 1 = supports declaration of void + * 2 = supports arrays of pointers to functions returning void + * 4 = supports comparisons between pointers to void functions and + * addresses of void functions + * 8 = suports declaration of generic void pointers + * + * The package designer should define VOIDUSED to indicate the requirements + * of the package. This can be done either by #defining VOIDUSED before + * including config.h, or by defining defvoidused in Myinit.U. If the + * latter approach is taken, only those flags will be tested. If the + * level of void support necessary is not present, defines void to int. */ -#define Mode_t $modetype /* file mode parameter for system calls */ +#ifndef VOIDUSED +#define VOIDUSED $defvoidused +#endif +#define VOIDFLAGS $voidflags +#if (VOIDFLAGS & VOIDUSED) != VOIDUSED +#define void int /* is void to be avoided? */ +#define M_VOID /* Xenix strikes again */ +#endif -/* Pid_t: - * This symbol holds the type used to declare process ids in the kernel. - * It can be int, uint, pid_t, etc... It may be necessary to include - * to get any typedef'ed information. +/* PERL_XS_APIVERSION: + * This variable contains the version of the oldest perl binary + * compatible with the present perl. perl.c:incpush() and + * lib/lib.pm will automatically search in $sitearch for older + * directories across major versions back to xs_apiversion. + * This is only useful if you have a perl library directory tree + * structured like the default one. + * See INSTALL for how this works. + * The versioned site_perl directory was introduced in 5.005, + * so that is the lowest possible value. + * Since this can depend on compile time options (such as + * bincompat) it is set by Configure. Other non-default sources + * of potential incompatibility, such as multiplicity, threads, + * debugging, 64bits, sfio, etc., are not checked for currently, + * though in principle we could go snooping around in old + * Config.pm files. + */ +/* PERL_PM_APIVERSION: + * This variable contains the version of the oldest perl + * compatible with the present perl. (That is, pure perl modules + * written for pm_apiversion will still work for the current + * version). perl.c:incpush() and lib/lib.pm will automatically + * search in $sitelib for older directories across major versions + * back to pm_apiversion. This is only useful if you have a perl + * library directory tree structured like the default one. The + * versioned site_perl library was introduced in 5.005, so that's + * the default setting for this variable. It's hard to imagine + * it changing before Perl6. It is included here for symmetry + * with xs_apiveprsion -- the searching algorithms will + * (presumably) be similar. + * See the INSTALL file for how this works. + */ +#define PERL_XS_APIVERSION "$xs_apiversion" +#define PERL_PM_APIVERSION "$pm_apiversion" + +/* HAS_GETFSSTAT: + * This symbol, if defined, indicates that the getfsstat routine is + * available to stat filesystems in bulk. + */ +#$d_getfsstat HAS_GETFSSTAT /**/ + +/* I_IEEEFP: + * This symbol, if defined, indicates that exists and + * should be included. */ -#define Pid_t $pidtype /* PID type */ +#$i_ieeefp I_IEEEFP /**/ -/* Size_t: - * This symbol holds the type used to declare length parameters - * for string functions. It is usually size_t, but may be - * unsigned long, int, etc. It may be necessary to include - * to get any typedef'ed information. +/* HAS_LSEEK_PROTO: + * This symbol, if defined, indicates that the system provides + * a prototype for the lseek() function. Otherwise, it is up + * to the program to supply one. A good guess is + * extern off_t lseek(int, off_t, int); */ -#define Size_t $sizetype /* length paramater for string functions */ +#$d_lseekproto HAS_LSEEK_PROTO /**/ -/* Uid_t: - * This symbol holds the type used to declare user ids in the kernel. - * It can be int, ushort, uid_t, etc... It may be necessary to include - * to get any typedef'ed information. +/* Sock_size_t: + * This symbol holds the type used for the size argument of + * various socket calls (just the base type, not the pointer-to). */ -#define Uid_t $uidtype /* UID type */ +#define Sock_size_t $socksizetype /**/ #endif !GROK!THIS!