X-Git-Url: http://git.shadowcat.co.uk/gitweb/gitweb.cgi?a=blobdiff_plain;f=config_h.SH;h=bf87d0a06e70f244826fb221fb805a7214dafb4c;hb=69ecfd1277806cc4f0867436789903927289b9b2;hp=09ac36e453f3c5db6cca73288cc8089db1369931;hpb=08e5223a8528b971b4471b7221166ff3212af428;p=p5sagit%2Fp5-mst-13.2.git diff --git a/config_h.SH b/config_h.SH index 09ac36e..bf87d0a 100644 --- a/config_h.SH +++ b/config_h.SH @@ -56,15 +56,6 @@ sed <$CONFIG_H -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un */ #$d_alarm HAS_ALARM /**/ -/* HASATTRIBUTE: - * This symbol indicates the C compiler can check for function attributes, - * such as printf formats. This is normally only supported by GNU cc. - */ -#$d_attribut HASATTRIBUTE /**/ -#ifndef HASATTRIBUTE -#define __attribute__(_arg_) -#endif - /* HAS_BCMP: * This symbol is defined if the bcmp() routine is available to * compare blocks of memory. @@ -902,47 +893,6 @@ sed <$CONFIG_H -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un */ #$i_vfork I_VFORK /**/ -/* INTSIZE: - * This symbol contains the value of sizeof(int) so that the C - * preprocessor can make decisions based on it. - */ -/* LONGSIZE: - * This symbol contains the value of sizeof(long) so that the C - * preprocessor can make decisions based on it. - */ -/* SHORTSIZE: - * This symbol contains the value of sizeof(short) so that the C - * preprocessor can make decisions based on it. - */ -#define INTSIZE $intsize /**/ -#define LONGSIZE $longsize /**/ -#define SHORTSIZE $shortsize /**/ - -/* MULTIARCH: - * This symbol, if defined, signifies that the build - * process will produce some binary files that are going to be - * used in a cross-platform environment. This is the case for - * example with the NeXT "fat" binaries that contain executables - * for several CPUs. - */ -#$multiarch MULTIARCH /**/ - -/* HAS_QUAD: - * This symbol, if defined, tells that there's a 64-bit integer type, - * Quad_t, and its unsigned counterpar, Uquad_t. QUADKIND will be one - * of QUAD_IS_INT, QUAD_IS_LONG, QUAD_IS_LONG_LONG, or QUAD_IS_INT64_T. - */ -#$d_quad HAS_QUAD /**/ -#ifdef HAS_QUAD -# define Quad_t $quadtype /**/ -# define Uquad_t $uquadtype /**/ -# define QUADKIND $quadkind /**/ -# define QUAD_IS_INT 1 -# define QUAD_IS_LONG 2 -# define QUAD_IS_LONG_LONG 3 -# define QUAD_IS_INT64_T 4 -#endif - /* HAS_ACCESSX: * This symbol, if defined, indicates that the accessx routine is * available to do extended access checks. @@ -980,6 +930,27 @@ sed <$CONFIG_H -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un #define OSNAME "$osname" /**/ #define OSVERS "$osvers" /**/ +/* USE_CROSS_COMPILE: + * This symbol, if defined, indicates that Perl is being cross-compiled. + */ +/* PERL_TARGETARCH: + * This symbol, if defined, indicates the target architecture + * Perl has been cross-compiled to. Undefined if not a cross-compile. + */ +#ifndef USE_CROSS_COMPILE +#$usecrosscompile USE_CROSS_COMPILE /**/ +#define PERL_TARGETARCH "$targetarch" /**/ +#endif + +/* MULTIARCH: + * This symbol, if defined, signifies that the build + * process will produce some binary files that are going to be + * used in a cross-platform environment. This is the case for + * example with the NeXT "fat" binaries that contain executables + * for several CPUs. + */ +#$multiarch MULTIARCH /**/ + /* MEM_ALIGNBYTES: * This symbol contains the number of bytes required to align a * double, or a long double when applicable. Usual values are 2, @@ -1038,6 +1009,22 @@ sed <$CONFIG_H -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un #define BIN "$bin" /**/ #define BIN_EXP "$binexp" /**/ +/* INTSIZE: + * This symbol contains the value of sizeof(int) so that the C + * preprocessor can make decisions based on it. + */ +/* LONGSIZE: + * This symbol contains the value of sizeof(long) so that the C + * preprocessor can make decisions based on it. + */ +/* SHORTSIZE: + * This symbol contains the value of sizeof(short) so that the C + * preprocessor can make decisions based on it. + */ +#define INTSIZE $intsize /**/ +#define LONGSIZE $longsize /**/ +#define SHORTSIZE $shortsize /**/ + /* BYTEORDER: * This symbol holds the hexadecimal constant defined in byteorder, * in a UV, i.e. 0x1234 or 0x4321 or 0x12345678, etc... @@ -1082,7 +1069,7 @@ sed <$CONFIG_H -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un #endif /* NeXT */ /* CAT2: - * This macro catenates 2 tokens together. + * This macro concatenates 2 tokens together. */ /* STRINGIFY: * This macro surrounds its token with double quotes. @@ -1102,7 +1089,7 @@ sed <$CONFIG_H -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un #define STRINGIFY(a) PeRl_StGiFy(a) #endif #if $cpp_stuff != 1 && $cpp_stuff != 42 -# include "Bletch: How does this C preprocessor catenate tokens?" +# include "Bletch: How does this C preprocessor concatenate tokens?" #endif /* CPPSTDIN: @@ -1154,6 +1141,9 @@ sed <$CONFIG_H -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un */ /* ASCTIME_R_PROTO: * This symbol encodes the prototype of asctime_r. + * It is zero if d_asctime_r is undef, and one of the + * REENTRANT_PROTO_T_ABC macros of reentr.h if d_asctime_r + * is defined. */ #$d_asctime_r HAS_ASCTIME_R /**/ #define ASCTIME_R_PROTO $asctime_r_proto /**/ @@ -1215,6 +1205,9 @@ sed <$CONFIG_H -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un */ /* CRYPT_R_PROTO: * This symbol encodes the prototype of crypt_r. + * It is zero if d_crypt_r is undef, and one of the + * REENTRANT_PROTO_T_ABC macros of reentr.h if d_crypt_r + * is defined. */ #$d_crypt_r HAS_CRYPT_R /**/ #define CRYPT_R_PROTO $crypt_r_proto /**/ @@ -1236,6 +1229,9 @@ sed <$CONFIG_H -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un */ /* CTIME_R_PROTO: * This symbol encodes the prototype of ctime_r. + * It is zero if d_ctime_r is undef, and one of the + * REENTRANT_PROTO_T_ABC macros of reentr.h if d_ctime_r + * is defined. */ #$d_ctime_r HAS_CTIME_R /**/ #define CTIME_R_PROTO $ctime_r_proto /**/ @@ -1254,6 +1250,9 @@ sed <$CONFIG_H -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un */ /* DRAND48_R_PROTO: * This symbol encodes the prototype of drand48_r. + * It is zero if d_drand48_r is undef, and one of the + * REENTRANT_PROTO_T_ABC macros of reentr.h if d_drand48_r + * is defined. */ #$d_drand48_r HAS_DRAND48_R /**/ #define DRAND48_R_PROTO $drand48_r_proto /**/ @@ -1278,6 +1277,9 @@ sed <$CONFIG_H -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un */ /* ENDGRENT_R_PROTO: * This symbol encodes the prototype of endgrent_r. + * It is zero if d_endgrent_r is undef, and one of the + * REENTRANT_PROTO_T_ABC macros of reentr.h if d_endgrent_r + * is defined. */ #$d_endgrent_r HAS_ENDGRENT_R /**/ #define ENDGRENT_R_PROTO $endgrent_r_proto /**/ @@ -1312,6 +1314,9 @@ sed <$CONFIG_H -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un */ /* ENDPWENT_R_PROTO: * This symbol encodes the prototype of endpwent_r. + * It is zero if d_endpwent_r is undef, and one of the + * REENTRANT_PROTO_T_ABC macros of reentr.h if d_endpwent_r + * is defined. */ #$d_endpwent_r HAS_ENDPWENT_R /**/ #define ENDPWENT_R_PROTO $endpwent_r_proto /**/ @@ -1453,6 +1458,12 @@ sed <$CONFIG_H -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un */ #$d_ftello HAS_FTELLO /**/ +/* HAS_FUTIMES: + * This symbol, if defined, indicates that the futimes routine is + * available to change file descriptor time stamps with struct timevals. + */ +#$d_futimes HAS_FUTIMES /**/ + /* Gconvert: * This preprocessor macro is defined to convert a floating point * number to a string without a trailing decimal point. This @@ -1500,6 +1511,9 @@ sed <$CONFIG_H -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un */ /* GETGRENT_R_PROTO: * This symbol encodes the prototype of getgrent_r. + * It is zero if d_getgrent_r is undef, and one of the + * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getgrent_r + * is defined. */ #$d_getgrent_r HAS_GETGRENT_R /**/ #define GETGRENT_R_PROTO $getgrent_r_proto /**/ @@ -1510,6 +1524,9 @@ sed <$CONFIG_H -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un */ /* GETGRGID_R_PROTO: * This symbol encodes the prototype of getgrgid_r. + * It is zero if d_getgrgid_r is undef, and one of the + * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getgrgid_r + * is defined. */ #$d_getgrgid_r HAS_GETGRGID_R /**/ #define GETGRGID_R_PROTO $getgrgid_r_proto /**/ @@ -1520,6 +1537,9 @@ sed <$CONFIG_H -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un */ /* GETGRNAM_R_PROTO: * This symbol encodes the prototype of getgrnam_r. + * It is zero if d_getgrnam_r is undef, and one of the + * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getgrnam_r + * is defined. */ #$d_getgrnam_r HAS_GETGRNAM_R /**/ #define GETGRNAM_R_PROTO $getgrnam_r_proto /**/ @@ -1591,6 +1611,9 @@ sed <$CONFIG_H -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un */ /* GETLOGIN_R_PROTO: * This symbol encodes the prototype of getlogin_r. + * It is zero if d_getlogin_r is undef, and one of the + * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getlogin_r + * is defined. */ #$d_getlogin_r HAS_GETLOGIN_R /**/ #define GETLOGIN_R_PROTO $getlogin_r_proto /**/ @@ -1695,6 +1718,9 @@ sed <$CONFIG_H -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un */ /* GETPWENT_R_PROTO: * This symbol encodes the prototype of getpwent_r. + * It is zero if d_getpwent_r is undef, and one of the + * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getpwent_r + * is defined. */ #$d_getpwent_r HAS_GETPWENT_R /**/ #define GETPWENT_R_PROTO $getpwent_r_proto /**/ @@ -1705,6 +1731,9 @@ sed <$CONFIG_H -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un */ /* GETPWNAM_R_PROTO: * This symbol encodes the prototype of getpwnam_r. + * It is zero if d_getpwnam_r is undef, and one of the + * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getpwnam_r + * is defined. */ #$d_getpwnam_r HAS_GETPWNAM_R /**/ #define GETPWNAM_R_PROTO $getpwnam_r_proto /**/ @@ -1715,6 +1744,9 @@ sed <$CONFIG_H -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un */ /* GETPWUID_R_PROTO: * This symbol encodes the prototype of getpwuid_r. + * It is zero if d_getpwuid_r is undef, and one of the + * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getpwuid_r + * is defined. */ #$d_getpwuid_r HAS_GETPWUID_R /**/ #define GETPWUID_R_PROTO $getpwuid_r_proto /**/ @@ -1745,6 +1777,9 @@ sed <$CONFIG_H -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un */ /* GETSPNAM_R_PROTO: * This symbol encodes the prototype of getspnam_r. + * It is zero if d_getspnam_r is undef, and one of the + * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getspnam_r + * is defined. */ #$d_getspnam_r HAS_GETSPNAM_R /**/ #define GETSPNAM_R_PROTO $getspnam_r_proto /**/ @@ -1766,13 +1801,17 @@ sed <$CONFIG_H -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un */ /* GMTIME_R_PROTO: * This symbol encodes the prototype of gmtime_r. + * It is zero if d_gmtime_r is undef, and one of the + * REENTRANT_PROTO_T_ABC macros of reentr.h if d_gmtime_r + * is defined. */ #$d_gmtime_r HAS_GMTIME_R /**/ #define GMTIME_R_PROTO $gmtime_r_proto /**/ /* HAS_GNULIBC: * This symbol, if defined, indicates to the C program that - * the GNU C library is being used. + * the GNU C library is being used. A better check is to use + * the __GLIBC__ and __GLIBC_MINOR__ symbols supplied with glibc. */ #$d_gnulibc HAS_GNULIBC /**/ #if defined(HAS_GNULIBC) && !defined(_GNU_SOURCE) @@ -1867,6 +1906,9 @@ sed <$CONFIG_H -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un */ /* LOCALTIME_R_PROTO: * This symbol encodes the prototype of localtime_r. + * It is zero if d_localtime_r is undef, and one of the + * REENTRANT_PROTO_T_ABC macros of reentr.h if d_localtime_r + * is defined. */ #$d_localtime_r HAS_LOCALTIME_R /**/ #define LOCALTIME_R_PROTO $localtime_r_proto /**/ @@ -1912,6 +1954,18 @@ sed <$CONFIG_H -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un */ #$d_madvise HAS_MADVISE /**/ +/* HAS_MALLOC_SIZE: + * This symbol, if defined, indicates that the malloc_size + * routine is available for use. + */ +#$d_malloc_size HAS_MALLOC_SIZE /**/ + +/* HAS_MALLOC_GOOD_SIZE: + * This symbol, if defined, indicates that the malloc_good_size + * routine is available for use. + */ +#$d_malloc_good_size HAS_MALLOC_GOOD_SIZE /**/ + /* HAS_MEMCHR: * This symbol, if defined, indicates that the memchr routine is available * to locate characters within a C string. @@ -1955,6 +2009,11 @@ sed <$CONFIG_H -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un * available to split a long double x into a fractional part f and * an integer part i such that |f| < 1.0 and (f + i) = x. */ +/* HAS_MODFL_PROTO: + * This symbol, if defined, indicates that the system provides + * a prototype for the modfl() function. Otherwise, it is up + * to the program to supply one. + */ /* HAS_MODFL_POW32_BUG: * This symbol, if defined, indicates that the modfl routine is * broken for long doubles >= pow(2, 32). @@ -1963,6 +2022,7 @@ sed <$CONFIG_H -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un * release 2.2.2 is known to be okay. */ #$d_modfl HAS_MODFL /**/ +#$d_modflproto HAS_MODFL_PROTO /**/ #$d_modfl_pow32_bug HAS_MODFL_POW32_BUG /**/ /* HAS_MPROTECT: @@ -2029,6 +2089,9 @@ sed <$CONFIG_H -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un */ /* RANDOM_R_PROTO: * This symbol encodes the prototype of random_r. + * It is zero if d_random_r is undef, and one of the + * REENTRANT_PROTO_T_ABC macros of reentr.h if d_random_r + * is defined. */ #$d_random_r HAS_RANDOM_R /**/ #define RANDOM_R_PROTO $random_r_proto /**/ @@ -2039,6 +2102,9 @@ sed <$CONFIG_H -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un */ /* READDIR_R_PROTO: * This symbol encodes the prototype of readdir_r. + * It is zero if d_readdir_r is undef, and one of the + * REENTRANT_PROTO_T_ABC macros of reentr.h if d_readdir_r + * is defined. */ #$d_readdir_r HAS_READDIR_R /**/ #define READDIR_R_PROTO $readdir_r_proto /**/ @@ -2112,6 +2178,9 @@ sed <$CONFIG_H -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un */ /* SETGRENT_R_PROTO: * This symbol encodes the prototype of setgrent_r. + * It is zero if d_setgrent_r is undef, and one of the + * REENTRANT_PROTO_T_ABC macros of reentr.h if d_setgrent_r + * is defined. */ #$d_setgrent_r HAS_SETGRENT_R /**/ #define SETGRENT_R_PROTO $setgrent_r_proto /**/ @@ -2177,6 +2246,9 @@ sed <$CONFIG_H -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un */ /* SETPWENT_R_PROTO: * This symbol encodes the prototype of setpwent_r. + * It is zero if d_setpwent_r is undef, and one of the + * REENTRANT_PROTO_T_ABC macros of reentr.h if d_setpwent_r + * is defined. */ #$d_setpwent_r HAS_SETPWENT_R /**/ #define SETPWENT_R_PROTO $setpwent_r_proto /**/ @@ -2243,6 +2315,23 @@ sed <$CONFIG_H -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un #define Siglongjmp(buf,retval) longjmp((buf),(retval)) #endif +/* USE_SITECUSTOMIZE: + * This symbol, if defined, indicates that sitecustomize should + * be used. + */ +#$usesitecustomize USE_SITECUSTOMIZE /**/ + +/* HAS_SNPRINTF: + * This symbol, if defined, indicates that the snprintf () library + * function is available for use. + */ +/* HAS_VSNPRINTF: + * This symbol, if defined, indicates that the vsnprintf () library + * function is available for use. + */ +#$d_snprintf HAS_SNPRINTF /**/ +#$d_vsnprintf HAS_VSNPRINTF /**/ + /* HAS_SOCKET: * This symbol, if defined, indicates that the BSD socket interface is * supported. @@ -2308,6 +2397,9 @@ sed <$CONFIG_H -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un */ /* SRAND48_R_PROTO: * This symbol encodes the prototype of srand48_r. + * It is zero if d_srand48_r is undef, and one of the + * REENTRANT_PROTO_T_ABC macros of reentr.h if d_srand48_r + * is defined. */ #$d_srand48_r HAS_SRAND48_R /**/ #define SRAND48_R_PROTO $srand48_r_proto /**/ @@ -2318,6 +2410,9 @@ sed <$CONFIG_H -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un */ /* SRANDOM_R_PROTO: * This symbol encodes the prototype of srandom_r. + * It is zero if d_srandom_r is undef, and one of the + * REENTRANT_PROTO_T_ABC macros of reentr.h if d_srandom_r + * is defined. */ #$d_srandom_r HAS_SRANDOM_R /**/ #define SRANDOM_R_PROTO $srandom_r_proto /**/ @@ -2448,6 +2543,9 @@ sed <$CONFIG_H -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un */ /* STRERROR_R_PROTO: * This symbol encodes the prototype of strerror_r. + * It is zero if d_strerror_r is undef, and one of the + * REENTRANT_PROTO_T_ABC macros of reentr.h if d_strerror_r + * is defined. */ #$d_strerror_r HAS_STRERROR_R /**/ #define STRERROR_R_PROTO $strerror_r_proto /**/ @@ -2520,6 +2618,9 @@ sed <$CONFIG_H -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un */ /* TMPNAM_R_PROTO: * This symbol encodes the prototype of tmpnam_r. + * It is zero if d_tmpnam_r is undef, and one of the + * REENTRANT_PROTO_T_ABC macros of reentr.h if d_tmpnam_r + * is defined. */ #$d_tmpnam_r HAS_TMPNAM_R /**/ #define TMPNAM_R_PROTO $tmpnam_r_proto /**/ @@ -2559,6 +2660,12 @@ sed <$CONFIG_H -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un */ #$d_unordered HAS_UNORDERED /**/ +/* HAS_UNSETENV: + * This symbol, if defined, indicates that the unsetenv () routine is + * available for use. + */ +#$d_unsetenv HAS_UNSETENV /**/ + /* HAS_USTAT: * This symbol, if defined, indicates that the ustat system call is * available to query file system statistics by dev_t. @@ -2909,10 +3016,15 @@ sed <$CONFIG_H -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un * This symbol, if defined, indicates to the C program that * the struct tm has a tm_zone field. */ +/* HAS_TM_TM_GMTOFF: + * This symbol, if defined, indicates to the C program that + * the struct tm has a tm_gmtoff field. + */ #$i_time I_TIME /**/ #$i_systime I_SYS_TIME /**/ #$i_systimek I_SYS_TIME_KERNEL /**/ #$d_tm_tm_zone HAS_TM_TM_ZONE /**/ +#$d_tm_tm_gmtoff HAS_TM_TM_GMTOFF /**/ /* I_USTAT: * This symbol, if defined, indicates that exists and @@ -2981,6 +3093,11 @@ sed <$CONFIG_H -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un #define Malloc_t $malloctype /**/ #define Free_t $freetype /**/ +/* PERL_MALLOC_WRAP: + * This symbol, if defined, indicates that we'd like malloc wrap checks. + */ +#$usemallocwrap PERL_MALLOC_WRAP /**/ + /* MYMALLOC: * This symbol, if defined, indicates that we're using our own malloc. */ @@ -3063,6 +3180,22 @@ sed <$CONFIG_H -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un */ #$d_perl_otherlibdirs PERL_OTHERLIBDIRS "$otherlibdirs" /**/ +/* HAS_QUAD: + * This symbol, if defined, tells that there's a 64-bit integer type, + * Quad_t, and its unsigned counterpar, Uquad_t. QUADKIND will be one + * of QUAD_IS_INT, QUAD_IS_LONG, QUAD_IS_LONG_LONG, or QUAD_IS_INT64_T. + */ +#$d_quad HAS_QUAD /**/ +#ifdef HAS_QUAD +# define Quad_t $quadtype /**/ +# define Uquad_t $uquadtype /**/ +# define QUADKIND $quadkind /**/ +# define QUAD_IS_INT 1 +# define QUAD_IS_LONG 2 +# define QUAD_IS_LONG_LONG 3 +# define QUAD_IS_INT64_T 4 +#endif + /* IVTYPE: * This symbol defines the C type used for Perl's IV. */ @@ -3137,6 +3270,10 @@ sed <$CONFIG_H -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un * This symbol contains the number of bits a variable of type NVTYPE * can preserve of a variable of type UVTYPE. */ +/* NV_ZERO_IS_ALLBITS_ZERO: + * This symbol, if defined, indicates that a variable of type NVTYPE + * stores 0.0 in memory as all bits zero. + */ #define IVTYPE $ivtype /**/ #define UVTYPE $uvtype /**/ #define I8TYPE $i8type /**/ @@ -3165,6 +3302,20 @@ sed <$CONFIG_H -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un #define NVSIZE $nvsize /**/ #$d_nv_preserves_uv NV_PRESERVES_UV #define NV_PRESERVES_UV_BITS $nv_preserves_uv_bits +#$d_nv_zero_is_allbits_zero NV_ZERO_IS_ALLBITS_ZERO +#if UVSIZE == 8 +# ifdef BYTEORDER +# if BYTEORDER == 0x1234 +# undef BYTEORDER +# define BYTEORDER 0x12345678 +# else +# if BYTEORDER == 0x4321 +# undef BYTEORDER +# define BYTEORDER 0x87654321 +# endif +# endif +# endif +#endif /* IVdf: * This symbol defines the format string used for printing a Perl IV @@ -3289,7 +3440,9 @@ sed <$CONFIG_H -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un * etc., where nn is the actual signal number (e.g. NUM37). * The signal number for sig_name[i] is stored in sig_num[i]. * The last element is 0 to terminate the list with a NULL. This - * corresponds to the 0 at the end of the sig_num list. + * corresponds to the 0 at the end of the sig_name_init list. + * Note that this variable is initialized from the sig_name_init, + * not from sig_name (which is unused). */ /* SIG_NUM: * This symbol contains a list of signal numbers, in the same order as the @@ -3303,11 +3456,13 @@ sed <$CONFIG_H -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un * The signal number corresponding to sig_name[i] is sig_number[i]. * if (i < NSIG) then sig_number[i] == i. * The last element is 0, corresponding to the 0 at the end of - * the sig_name list. + * the sig_name_init list. + * Note that this variable is initialized from the sig_num_init, + * not from sig_num (which is unused). */ /* SIG_SIZE: - * This variable contains the number of elements of the sig_name - * and sig_num arrays, excluding the final NULL entry. + * This variable contains the number of elements of the SIG_NAME + * and SIG_NUM arrays, excluding the final NULL entry. */ #define SIG_NAME $sig_name_init /**/ #define SIG_NUM $sig_num_init /**/ @@ -3586,40 +3741,34 @@ sed <$CONFIG_H -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un #define M_VOID /* Xenix strikes again */ #endif -/* PERL_XS_APIVERSION: - * This variable contains the version of the oldest perl binary - * compatible with the present perl. perl.c:incpush() and - * lib/lib.pm will automatically search in $sitearch for older - * directories across major versions back to xs_apiversion. - * This is only useful if you have a perl library directory tree - * structured like the default one. - * See INSTALL for how this works. - * The versioned site_perl directory was introduced in 5.005, - * so that is the lowest possible value. - * Since this can depend on compile time options - * it is set by Configure. Other non-default sources - * of potential incompatibility, such as multiplicity, threads, - * debugging, 64bits, sfio, etc., are not checked for currently, - * though in principle we could go snooping around in old - * Config.pm files. - */ -/* PERL_PM_APIVERSION: - * This variable contains the version of the oldest perl - * compatible with the present perl. (That is, pure perl modules - * written for pm_apiversion will still work for the current - * version). perl.c:incpush() and lib/lib.pm will automatically - * search in $sitelib for older directories across major versions - * back to pm_apiversion. This is only useful if you have a perl - * library directory tree structured like the default one. The - * versioned site_perl library was introduced in 5.005, so that's - * the default setting for this variable. It's hard to imagine - * it changing before Perl6. It is included here for symmetry - * with xs_apiveprsion -- the searching algorithms will - * (presumably) be similar. - * See the INSTALL file for how this works. - */ -#define PERL_XS_APIVERSION "$xs_apiversion" -#define PERL_PM_APIVERSION "$pm_apiversion" +/* HASATTRIBUTE_FORMAT: + * Can we handle GCC attribute for checking printf-style formats + */ +/* HASATTRIBUTE_MALLOC: + * Can we handle GCC attribute for malloc-style functions. + */ +/* HASATTRIBUTE_NONNULL: + * Can we handle GCC attribute for nonnull function parms. + */ +/* HASATTRIBUTE_NORETURN: + * Can we handle GCC attribute for functions that do not return + */ +/* HASATTRIBUTE_PURE: + * Can we handle GCC attribute for pure functions + */ +/* HASATTRIBUTE_UNUSED: + * Can we handle GCC attribute for unused variables and arguments + */ +/* HASATTRIBUTE_WARN_UNUSED_RESULT: + * Can we handle GCC attribute for warning on unused results + */ +#$d_attribute_format HASATTRIBUTE_FORMAT /**/ +#$d_attribute_noreturn HASATTRIBUTE_NORETURN /**/ +#$d_attribute_malloc HASATTRIBUTE_MALLOC /**/ +#$d_attribute_nonnull HASATTRIBUTE_NONNULL /**/ +#$d_attribute_pure HASATTRIBUTE_PURE /**/ +#$d_attribute_unused HASATTRIBUTE_UNUSED /**/ +#$d_attribute_warn_unused_result HASATTRIBUTE_WARN_UNUSED_RESULT /**/ /* HAS_CRYPT: * This symbol, if defined, indicates that the crypt routine is available @@ -3705,17 +3854,33 @@ sed <$CONFIG_H -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un */ #define SH_PATH "$sh" /**/ -/* USE_CROSS_COMPILE: - * This symbol, if defined, indicates that Perl is being cross-compiled. +/* HAS_AINTL: + * This symbol, if defined, indicates that the aintl routine is + * available. If copysignl is also present we can emulate modfl. */ -/* PERL_TARGETARCH: - * This symbol, if defined, indicates the target architecture - * Perl has been cross-compiled to. Undefined if not a cross-compile. +#$d_aintl HAS_AINTL /**/ + +/* HAS_BUILTIN_CHOOSE_EXPR: + * Can we handle GCC builtin for compile-time ternary-like expressions */ -#ifndef USE_CROSS_COMPILE -#$usecrosscompile USE_CROSS_COMPILE /**/ -#define PERL_TARGETARCH "$targetarch" /**/ -#endif +/* HAS_BUILTIN_EXPECT: + * Can we handle GCC builtin for telling that certain values are more + * likely + */ +#$d_builtin_expect HAS_BUILTIN_EXPECT /**/ +#$d_builtin_choose_expr HAS_BUILTIN_CHOOSE_EXPR /**/ + +/* HAS_CLEARENV: + * This symbol, if defined, indicates that the clearenv () routine is + * available for use. + */ +#$d_clearenv HAS_CLEARENV /**/ + +/* HAS_COPYSIGNL: + * This symbol, if defined, indicates that the copysignl routine is + * available. If aintl is also present we can emulate modfl. + */ +#$d_copysignl HAS_COPYSIGNL /**/ /* HAS_DBMINIT_PROTO: * This symbol, if defined, indicates that the system provides @@ -3731,6 +3896,12 @@ sed <$CONFIG_H -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un */ #$d_dirfd HAS_DIRFD /**/ +/* HAS_FAST_STDIO: + * This symbol, if defined, indicates that the "fast stdio" + * is available to manipulate the stdio buffers directly. + */ +#$d_faststdio HAS_FAST_STDIO /**/ + /* HAS_FLOCK_PROTO: * This symbol, if defined, indicates that the system provides * a prototype for the flock() function. Otherwise, it is up @@ -3757,6 +3928,18 @@ sed <$CONFIG_H -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un */ #$d_fpclassl HAS_FPCLASSL /**/ +/* HAS_ILOGBL: + * This symbol, if defined, indicates that the ilogbl routine is + * available. If scalbnl is also present we can emulate frexpl. + */ +#$d_ilogbl HAS_ILOGBL /**/ + +/* LIBM_LIB_VERSION: + * This symbol, if defined, indicates that libm exports _LIB_VERSION + * and that math.h defines the enum to manipulate it. + */ +#$d_libm_lib_version LIBM_LIB_VERSION /**/ + /* HAS_NL_LANGINFO: * This symbol, if defined, indicates that the nl_langinfo routine is * available to return local data. You will also need @@ -3778,6 +3961,19 @@ sed <$CONFIG_H -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un #define PROCSELFEXE_PATH $procselfexe /**/ #endif +/* HAS_PTHREAD_ATTR_SETSCOPE: + * This symbol, if defined, indicates that the pthread_attr_setscope + * system call is available to set the contention scope attribute of + * a thread attribute object. + */ +#$d_pthread_attr_setscope HAS_PTHREAD_ATTR_SETSCOPE /**/ + +/* HAS_SCALBNL: + * This symbol, if defined, indicates that the scalbnl routine is + * available. If ilogbl is also present we can emulate frexpl. + */ +#$d_scalbnl HAS_SCALBNL /**/ + /* HAS_SIGPROCMASK: * This symbol, if defined, indicates that the sigprocmask * system call is available to examine or change the signal mask @@ -3799,6 +3995,14 @@ sed <$CONFIG_H -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un */ #$d_sockatmarkproto HAS_SOCKATMARK_PROTO /**/ +/* SPRINTF_RETURNS_STRLEN: + * This variable defines whether sprintf returns the length of the string + * (as per the ANSI spec). Some C libraries retain compatibility with + * pre-ANSI C and return a pointer to the passed in buffer; for these + * this variable will be undef. + */ +#$d_sprintf_returns_strlen SPRINTF_RETURNS_STRLEN /**/ + /* HAS_SETRESGID_PROTO: * This symbol, if defined, indicates that the system provides * a prototype for the setresgid() function. Otherwise, it is up @@ -3821,6 +4025,18 @@ sed <$CONFIG_H -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un */ #$d_strftime HAS_STRFTIME /**/ +/* HAS_STRLCAT: + * This symbol, if defined, indicates that the strlcat () routine is + * available to do string concatenation. + */ +#$d_strlcat HAS_STRLCAT /**/ + +/* HAS_STRLCPY: + * This symbol, if defined, indicates that the strlcpy () routine is + * available to do string copying. + */ +#$d_strlcpy HAS_STRLCPY /**/ + /* HAS_SYSCALL_PROTO: * This symbol, if defined, indicates that the system provides * a prototype for the syscall() function. Otherwise, it is up @@ -3834,7 +4050,9 @@ sed <$CONFIG_H -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un * This symbol, if defined, indicates that you must access * character data through U32-aligned pointers. */ +#ifndef U32_ALIGNMENT_REQUIRED #$d_u32align U32_ALIGNMENT_REQUIRED /**/ +#endif /* HAS_USLEEP_PROTO: * This symbol, if defined, indicates that the system provides @@ -3862,12 +4080,30 @@ sed <$CONFIG_H -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un */ #$i_langinfo I_LANGINFO /**/ +/* USE_FAST_STDIO: + * This symbol, if defined, indicates that Perl should + * be built to use 'fast stdio'. + * Defaults to define in Perls 5.8 and earlier, to undef later. + */ +#ifndef USE_FAST_STDIO +#$usefaststdio USE_FAST_STDIO /**/ +#endif + +/* PERL_RELOCATABLE_INC: + * This symbol, if defined, indicates that we'd like to relocate entries + * in @INC at run time based on the location of the perl binary. + */ +#define PERL_RELOCATABLE_INC "$userelocatableinc" /**/ + /* HAS_CTERMID_R: * This symbol, if defined, indicates that the ctermid_r routine * is available to ctermid re-entrantly. */ /* CTERMID_R_PROTO: * This symbol encodes the prototype of ctermid_r. + * It is zero if d_ctermid_r is undef, and one of the + * REENTRANT_PROTO_T_ABC macros of reentr.h if d_ctermid_r + * is defined. */ #$d_ctermid_r HAS_CTERMID_R /**/ #define CTERMID_R_PROTO $ctermid_r_proto /**/ @@ -3878,6 +4114,9 @@ sed <$CONFIG_H -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un */ /* ENDHOSTENT_R_PROTO: * This symbol encodes the prototype of endhostent_r. + * It is zero if d_endhostent_r is undef, and one of the + * REENTRANT_PROTO_T_ABC macros of reentr.h if d_endhostent_r + * is defined. */ #$d_endhostent_r HAS_ENDHOSTENT_R /**/ #define ENDHOSTENT_R_PROTO $endhostent_r_proto /**/ @@ -3888,6 +4127,9 @@ sed <$CONFIG_H -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un */ /* ENDNETENT_R_PROTO: * This symbol encodes the prototype of endnetent_r. + * It is zero if d_endnetent_r is undef, and one of the + * REENTRANT_PROTO_T_ABC macros of reentr.h if d_endnetent_r + * is defined. */ #$d_endnetent_r HAS_ENDNETENT_R /**/ #define ENDNETENT_R_PROTO $endnetent_r_proto /**/ @@ -3898,6 +4140,9 @@ sed <$CONFIG_H -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un */ /* ENDPROTOENT_R_PROTO: * This symbol encodes the prototype of endprotoent_r. + * It is zero if d_endprotoent_r is undef, and one of the + * REENTRANT_PROTO_T_ABC macros of reentr.h if d_endprotoent_r + * is defined. */ #$d_endprotoent_r HAS_ENDPROTOENT_R /**/ #define ENDPROTOENT_R_PROTO $endprotoent_r_proto /**/ @@ -3908,6 +4153,9 @@ sed <$CONFIG_H -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un */ /* ENDSERVENT_R_PROTO: * This symbol encodes the prototype of endservent_r. + * It is zero if d_endservent_r is undef, and one of the + * REENTRANT_PROTO_T_ABC macros of reentr.h if d_endservent_r + * is defined. */ #$d_endservent_r HAS_ENDSERVENT_R /**/ #define ENDSERVENT_R_PROTO $endservent_r_proto /**/ @@ -3918,6 +4166,9 @@ sed <$CONFIG_H -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un */ /* GETHOSTBYADDR_R_PROTO: * This symbol encodes the prototype of gethostbyaddr_r. + * It is zero if d_gethostbyaddr_r is undef, and one of the + * REENTRANT_PROTO_T_ABC macros of reentr.h if d_gethostbyaddr_r + * is defined. */ #$d_gethostbyaddr_r HAS_GETHOSTBYADDR_R /**/ #define GETHOSTBYADDR_R_PROTO $gethostbyaddr_r_proto /**/ @@ -3928,6 +4179,9 @@ sed <$CONFIG_H -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un */ /* GETHOSTBYNAME_R_PROTO: * This symbol encodes the prototype of gethostbyname_r. + * It is zero if d_gethostbyname_r is undef, and one of the + * REENTRANT_PROTO_T_ABC macros of reentr.h if d_gethostbyname_r + * is defined. */ #$d_gethostbyname_r HAS_GETHOSTBYNAME_R /**/ #define GETHOSTBYNAME_R_PROTO $gethostbyname_r_proto /**/ @@ -3938,6 +4192,9 @@ sed <$CONFIG_H -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un */ /* GETHOSTENT_R_PROTO: * This symbol encodes the prototype of gethostent_r. + * It is zero if d_gethostent_r is undef, and one of the + * REENTRANT_PROTO_T_ABC macros of reentr.h if d_gethostent_r + * is defined. */ #$d_gethostent_r HAS_GETHOSTENT_R /**/ #define GETHOSTENT_R_PROTO $gethostent_r_proto /**/ @@ -3948,6 +4205,9 @@ sed <$CONFIG_H -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un */ /* GETNETBYADDR_R_PROTO: * This symbol encodes the prototype of getnetbyaddr_r. + * It is zero if d_getnetbyaddr_r is undef, and one of the + * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getnetbyaddr_r + * is defined. */ #$d_getnetbyaddr_r HAS_GETNETBYADDR_R /**/ #define GETNETBYADDR_R_PROTO $getnetbyaddr_r_proto /**/ @@ -3958,6 +4218,9 @@ sed <$CONFIG_H -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un */ /* GETNETBYNAME_R_PROTO: * This symbol encodes the prototype of getnetbyname_r. + * It is zero if d_getnetbyname_r is undef, and one of the + * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getnetbyname_r + * is defined. */ #$d_getnetbyname_r HAS_GETNETBYNAME_R /**/ #define GETNETBYNAME_R_PROTO $getnetbyname_r_proto /**/ @@ -3968,6 +4231,9 @@ sed <$CONFIG_H -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un */ /* GETNETENT_R_PROTO: * This symbol encodes the prototype of getnetent_r. + * It is zero if d_getnetent_r is undef, and one of the + * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getnetent_r + * is defined. */ #$d_getnetent_r HAS_GETNETENT_R /**/ #define GETNETENT_R_PROTO $getnetent_r_proto /**/ @@ -3978,6 +4244,9 @@ sed <$CONFIG_H -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un */ /* GETPROTOBYNAME_R_PROTO: * This symbol encodes the prototype of getprotobyname_r. + * It is zero if d_getprotobyname_r is undef, and one of the + * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getprotobyname_r + * is defined. */ #$d_getprotobyname_r HAS_GETPROTOBYNAME_R /**/ #define GETPROTOBYNAME_R_PROTO $getprotobyname_r_proto /**/ @@ -3988,6 +4257,9 @@ sed <$CONFIG_H -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un */ /* GETPROTOBYNUMBER_R_PROTO: * This symbol encodes the prototype of getprotobynumber_r. + * It is zero if d_getprotobynumber_r is undef, and one of the + * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getprotobynumber_r + * is defined. */ #$d_getprotobynumber_r HAS_GETPROTOBYNUMBER_R /**/ #define GETPROTOBYNUMBER_R_PROTO $getprotobynumber_r_proto /**/ @@ -3998,6 +4270,9 @@ sed <$CONFIG_H -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un */ /* GETPROTOENT_R_PROTO: * This symbol encodes the prototype of getprotoent_r. + * It is zero if d_getprotoent_r is undef, and one of the + * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getprotoent_r + * is defined. */ #$d_getprotoent_r HAS_GETPROTOENT_R /**/ #define GETPROTOENT_R_PROTO $getprotoent_r_proto /**/ @@ -4008,6 +4283,9 @@ sed <$CONFIG_H -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un */ /* GETSERVBYNAME_R_PROTO: * This symbol encodes the prototype of getservbyname_r. + * It is zero if d_getservbyname_r is undef, and one of the + * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getservbyname_r + * is defined. */ #$d_getservbyname_r HAS_GETSERVBYNAME_R /**/ #define GETSERVBYNAME_R_PROTO $getservbyname_r_proto /**/ @@ -4018,6 +4296,9 @@ sed <$CONFIG_H -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un */ /* GETSERVBYPORT_R_PROTO: * This symbol encodes the prototype of getservbyport_r. + * It is zero if d_getservbyport_r is undef, and one of the + * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getservbyport_r + * is defined. */ #$d_getservbyport_r HAS_GETSERVBYPORT_R /**/ #define GETSERVBYPORT_R_PROTO $getservbyport_r_proto /**/ @@ -4028,13 +4309,16 @@ sed <$CONFIG_H -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un */ /* GETSERVENT_R_PROTO: * This symbol encodes the prototype of getservent_r. + * It is zero if d_getservent_r is undef, and one of the + * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getservent_r + * is defined. */ #$d_getservent_r HAS_GETSERVENT_R /**/ #define GETSERVENT_R_PROTO $getservent_r_proto /**/ /* HAS_PTHREAD_ATFORK: * This symbol, if defined, indicates that the pthread_atfork routine - * is available setup fork handlers. + * is available to setup fork handlers. */ #$d_pthread_atfork HAS_PTHREAD_ATFORK /**/ @@ -4044,6 +4328,9 @@ sed <$CONFIG_H -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un */ /* READDIR64_R_PROTO: * This symbol encodes the prototype of readdir64_r. + * It is zero if d_readdir64_r is undef, and one of the + * REENTRANT_PROTO_T_ABC macros of reentr.h if d_readdir64_r + * is defined. */ #$d_readdir64_r HAS_READDIR64_R /**/ #define READDIR64_R_PROTO $readdir64_r_proto /**/ @@ -4054,6 +4341,9 @@ sed <$CONFIG_H -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un */ /* SETHOSTENT_R_PROTO: * This symbol encodes the prototype of sethostent_r. + * It is zero if d_sethostent_r is undef, and one of the + * REENTRANT_PROTO_T_ABC macros of reentr.h if d_sethostent_r + * is defined. */ #$d_sethostent_r HAS_SETHOSTENT_R /**/ #define SETHOSTENT_R_PROTO $sethostent_r_proto /**/ @@ -4064,6 +4354,9 @@ sed <$CONFIG_H -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un */ /* SETLOCALE_R_PROTO: * This symbol encodes the prototype of setlocale_r. + * It is zero if d_setlocale_r is undef, and one of the + * REENTRANT_PROTO_T_ABC macros of reentr.h if d_setlocale_r + * is defined. */ #$d_setlocale_r HAS_SETLOCALE_R /**/ #define SETLOCALE_R_PROTO $setlocale_r_proto /**/ @@ -4074,6 +4367,9 @@ sed <$CONFIG_H -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un */ /* SETNETENT_R_PROTO: * This symbol encodes the prototype of setnetent_r. + * It is zero if d_setnetent_r is undef, and one of the + * REENTRANT_PROTO_T_ABC macros of reentr.h if d_setnetent_r + * is defined. */ #$d_setnetent_r HAS_SETNETENT_R /**/ #define SETNETENT_R_PROTO $setnetent_r_proto /**/ @@ -4084,6 +4380,9 @@ sed <$CONFIG_H -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un */ /* SETPROTOENT_R_PROTO: * This symbol encodes the prototype of setprotoent_r. + * It is zero if d_setprotoent_r is undef, and one of the + * REENTRANT_PROTO_T_ABC macros of reentr.h if d_setprotoent_r + * is defined. */ #$d_setprotoent_r HAS_SETPROTOENT_R /**/ #define SETPROTOENT_R_PROTO $setprotoent_r_proto /**/ @@ -4094,6 +4393,9 @@ sed <$CONFIG_H -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un */ /* SETSERVENT_R_PROTO: * This symbol encodes the prototype of setservent_r. + * It is zero if d_setservent_r is undef, and one of the + * REENTRANT_PROTO_T_ABC macros of reentr.h if d_setservent_r + * is defined. */ #$d_setservent_r HAS_SETSERVENT_R /**/ #define SETSERVENT_R_PROTO $setservent_r_proto /**/ @@ -4104,6 +4406,9 @@ sed <$CONFIG_H -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un */ /* TTYNAME_R_PROTO: * This symbol encodes the prototype of ttyname_r. + * It is zero if d_ttyname_r is undef, and one of the + * REENTRANT_PROTO_T_ABC macros of reentr.h if d_ttyname_r + * is defined. */ #$d_ttyname_r HAS_TTYNAME_R /**/ #define TTYNAME_R_PROTO $ttyname_r_proto /**/