X-Git-Url: http://git.shadowcat.co.uk/gitweb/gitweb.cgi?a=blobdiff_plain;f=config_h.SH;h=bc1fc3f7d6e8fb0ac83202ea08da22cba3f53181;hb=a5262162c2c854ee96768d32ed06a8df25b95505;hp=108b6739cb8407413702857245e91ac4f57a2104;hpb=1acc7ade4abfe5b51345cb3c9fcc0526ac392d7c;p=p5sagit%2Fp5-mst-13.2.git diff --git a/config_h.SH b/config_h.SH index 108b673..bc1fc3f 100644 --- a/config_h.SH +++ b/config_h.SH @@ -1,29 +1,35 @@ +case "$CONFIG_SH" in +'') CONFIG_SH=config.sh ;; +esac +case "$CONFIG_H" in +'') CONFIG_H=config.h ;; +esac case $CONFIG in '') - if test -f config.sh; then TOP=.; - elif test -f ../config.sh; then TOP=..; - elif test -f ../../config.sh; then TOP=../..; - elif test -f ../../../config.sh; then TOP=../../..; - elif test -f ../../../../config.sh; then TOP=../../../..; + if test -f $CONFIG_SH; then TOP=.; + elif test -f ../$CONFIG_SH; then TOP=..; + elif test -f ../../$CONFIG_SH; then TOP=../..; + elif test -f ../../../$CONFIG_SH; then TOP=../../..; + elif test -f ../../../../$CONFIG_SH; then TOP=../../../..; else - echo "Can't find config.sh."; exit 1 + echo "Can't find $CONFIG_SH."; exit 1 fi - . $TOP/config.sh + . $TOP/$CONFIG_SH ;; esac case "$0" in */*) cd `expr X$0 : 'X\(.*\)/'` ;; esac -echo "Extracting config.h (with variable substitutions)" -sed <config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un-def!#undef!' +echo "Extracting $CONFIG_H (with variable substitutions)" +sed <$CONFIG_H -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un-def!#undef!' /* * This file was produced by running the config_h.SH script, which - * gets its values from config.sh, which is generally produced by + * gets its values from $CONFIG_SH, which is generally produced by * running Configure. * * Feel free to modify any of this as the need arises. Note, however, * that running config_h.SH again will wipe out any changes you've made. - * For a more permanent change edit config.sh and rerun config_h.SH. + * For a more permanent change edit $CONFIG_SH and rerun config_h.SH. * * \$Id: Config_h.U,v 3.0.1.5 1997/02/28 14:57:43 ram Exp $ */ @@ -189,12 +195,6 @@ sed <config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un- */ #$d_fgetpos HAS_FGETPOS /**/ -/* FLEXFILENAMES: - * This symbol, if defined, indicates that the system supports filenames - * longer than 14 characters. - */ -#$d_flexfnam FLEXFILENAMES /**/ - /* HAS_FLOCK: * This symbol, if defined, indicates that the flock routine is * available to do file locking. @@ -244,17 +244,6 @@ sed <config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un- */ #$d_getpgid HAS_GETPGID /**/ -/* HAS_GETPGRP: - * This symbol, if defined, indicates that the getpgrp routine is - * available to get the current process group. - */ -/* USE_BSD_GETPGRP: - * This symbol, if defined, indicates that getpgrp needs one - * arguments whereas USG one needs none. - */ -#$d_getpgrp HAS_GETPGRP /**/ -#$d_bsdgetpgrp USE_BSD_GETPGRP /**/ - /* HAS_GETPGRP2: * This symbol, if defined, indicates that the getpgrp2() (as in DG/UX) * routine is available to get the current process group. @@ -509,18 +498,6 @@ sed <config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un- */ #$d_setpgid HAS_SETPGID /**/ -/* HAS_SETPGRP: - * This symbol, if defined, indicates that the setpgrp routine is - * available to set the current process group. - */ -/* USE_BSD_SETPGRP: - * This symbol, if defined, indicates that setpgrp needs two - * arguments whereas USG one needs none. See also HAS_SETPGID - * for a POSIX interface. - */ -#$d_setpgrp HAS_SETPGRP /**/ -#$d_bsdsetpgrp USE_BSD_SETPGRP /**/ - /* HAS_SETPGRP2: * This symbol, if defined, indicates that the setpgrp2() (as in DG/UX) * routine is available to set the current process group. @@ -1004,12 +981,6 @@ sed <config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un- */ #define SH_PATH "$sh" /**/ -/* STDCHAR: - * This symbol is defined to be the type of char used in stdio.h. - * It has the values "unsigned char" or "char". - */ -#define STDCHAR $stdchar /**/ - /* CROSSCOMPILE: * This symbol, if defined, signifies that we our * build process is a cross-compilation. @@ -1147,7 +1118,7 @@ sed <config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un- #define BIN_EXP "$binexp" /**/ /* PERL_BINCOMPAT_5005: - * This symbol, if defined, indicates that Perl 5.006 should be + * This symbol, if defined, indicates that this version of Perl should be * binary-compatible with Perl 5.005. This is impossible for builds * that use features like threads and multiplicity it is always $undef * for those versions. @@ -1204,21 +1175,21 @@ sed <config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un- * This macro surrounds its token with double quotes. */ #if $cpp_stuff == 1 -# define CAT2(a,b) a/**/b -# define STRINGIFY(a) "a" +#define CAT2(a,b) a/**/b +#define STRINGIFY(a) "a" /* If you can get stringification with catify, tell me how! */ #endif #if $cpp_stuff == 42 -# define PeRl_CaTiFy(a, b) a ## b -# define PeRl_StGiFy(a) #a +#define PeRl_CaTiFy(a, b) a ## b +#define PeRl_StGiFy(a) #a /* the additional level of indirection enables these macros to be * used as arguments to other macros. See K&R 2nd ed., page 231. */ -# define CAT2(a,b) PeRl_CaTiFy(a,b) -# define StGiFy(a) PeRl_StGiFy(a) -# define STRINGIFY(a) PeRl_StGiFy(a) +#define CAT2(a,b) PeRl_CaTiFy(a,b) +#define StGiFy(a) PeRl_StGiFy(a) +#define STRINGIFY(a) PeRl_StGiFy(a) #endif #if $cpp_stuff != 1 && $cpp_stuff != 42 -#include "Bletch: How does this C preprocessor catenate tokens?" +# include "Bletch: How does this C preprocessor catenate tokens?" #endif /* CPPSTDIN: @@ -1348,23 +1319,30 @@ sed <config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un- */ #$d_endsent HAS_ENDSERVENT /**/ -/* HAS_ENDSPENT: - * This symbol, if defined, indicates that the endspent system call is - * available to finalize the scan of SysV shadow password entries. - */ -#$d_endspent HAS_ENDSPENT /**/ - /* HAS_FD_SET: * This symbol, when defined, indicates presence of the fd_set typedef * in */ #$d_fd_set HAS_FD_SET /**/ +/* FLEXFILENAMES: + * This symbol, if defined, indicates that the system supports filenames + * longer than 14 characters. + */ +#$d_flexfnam FLEXFILENAMES /**/ + /* HAS_FPOS64_T: * This symbol will be defined if the C compiler supports fpos64_t. */ #$d_fpos64_t HAS_FPOS64_T /**/ +/* HAS_FREXPL: + * This symbol, if defined, indicates that the frexpl routine is + * available to break a long double floating-point number into + * a normalized fraction and an integral power of 2. + */ +#$d_frexpl HAS_FREXPL /**/ + /* HAS_STRUCT_FS_DATA: * This symbol, if defined, indicates that the struct fs_data * to do statfs() is supported. @@ -1412,6 +1390,12 @@ sed <config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un- */ #$d_getcwd HAS_GETCWD /**/ +/* HAS_GETESPWNAM: + * This symbol, if defined, indicates that the getespwnam system call is + * available to retrieve enchanced (shadow) password entries by name. + */ +#$d_getespwnam HAS_GETESPWNAM /**/ + /* HAS_GETFSSTAT: * This symbol, if defined, indicates that the getfsstat routine is * available to stat filesystems in bulk. @@ -1517,6 +1501,13 @@ sed <config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un- */ #$d_getnetprotos HAS_GETNET_PROTOS /**/ +/* HAS_GETPAGESIZE: + * This symbol, if defined, indicates that the getpagesize system call + * is available to get system page size, which is the granularity of + * many memory management calls. + */ +#$d_getpagsz HAS_GETPAGESIZE /**/ + /* HAS_GETPROTOENT: * This symbol, if defined, indicates that the getprotoent() routine is * available to look up protocols in some data base or another. @@ -1542,6 +1533,12 @@ sed <config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un- */ #$d_getprotoprotos HAS_GETPROTO_PROTOS /**/ +/* HAS_GETPRPWNAM: + * This symbol, if defined, indicates that the getprpwnam system call is + * available to retrieve protected (shadow) password entries by name. + */ +#$d_getprpwnam HAS_GETPRPWNAM /**/ + /* HAS_GETPWENT: * This symbol, if defined, indicates that the getpwent routine is * available for sequential access of the passwd database. @@ -1563,12 +1560,6 @@ sed <config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un- */ #$d_getservprotos HAS_GETSERV_PROTOS /**/ -/* HAS_GETSPENT: - * This symbol, if defined, indicates that the getspent system call is - * available to retrieve SysV shadow password entries sequentially. - */ -#$d_getspent HAS_GETSPENT /**/ - /* HAS_GETSPNAM: * This symbol, if defined, indicates that the getspnam system call is * available to retrieve SysV shadow password entries by name. @@ -1644,6 +1635,25 @@ sed <config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un- */ #$d_isascii HAS_ISASCII /**/ +/* HAS_ISNAN: + * This symbol, if defined, indicates that the isnan routine is + * available to check whether a double is a NaN. + */ +#$d_isnan HAS_ISNAN /**/ + +/* HAS_ISNANL: + * This symbol, if defined, indicates that the isnanl routine is + * available to check whether a long double is a NaN. + */ +#$d_isnanl HAS_ISNANL /**/ + +/* HAS_LCHOWN: + * This symbol, if defined, indicates that the lchown routine is + * available to operate on a symbolic link (instead of following the + * link). + */ +#$d_lchown HAS_LCHOWN /**/ + /* HAS_LDBL_DIG: * This symbol, if defined, indicates that this system's * or defines the symbol LDBL_DIG, which is the number @@ -1731,6 +1741,13 @@ sed <config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un- #$d_mmap HAS_MMAP /**/ #define Mmap_t $mmaptype /**/ +/* HAS_MODFL: + * This symbol, if defined, indicates that the modfl routine is + * available to split a long double x into a fractional part f and + * an integer part i such that |f| < 1.0 and (f + i) = x. + */ +#$d_modfl HAS_MODFL /**/ + /* HAS_MPROTECT: * This symbol, if defined, indicates that the mprotect system call is * available to modify the access protection of a memory mapped file. @@ -1843,6 +1860,12 @@ sed <config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un- */ #$d_setpent HAS_SETPROTOENT /**/ +/* HAS_SETPROCTITLE: + * This symbol, if defined, indicates that the setproctitle routine is + * available to set process title. + */ +#$d_setproctitle HAS_SETPROCTITLE /**/ + /* HAS_SETPWENT: * This symbol, if defined, indicates that the setpwent routine is * available for initializing sequential access of the passwd database. @@ -1855,12 +1878,6 @@ sed <config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un- */ #$d_setsent HAS_SETSERVENT /**/ -/* HAS_SETSPENT: - * This symbol, if defined, indicates that the setspent system call is - * available to initialize the scan of SysV shadow password entries. - */ -#$d_setspent HAS_SETSPENT /**/ - /* HAS_SETVBUF: * This symbol, if defined, indicates that the setvbuf routine is * available to change buffering on an open stdio stream. @@ -1964,6 +1981,12 @@ sed <config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un- #$d_msg_proxy HAS_MSG_PROXY /**/ #$d_scm_rights HAS_SCM_RIGHTS /**/ +/* HAS_SOCKS5_INIT: + * This symbol, if defined, indicates that the socks5_init routine is + * available to initialize SOCKS 5. + */ +#$d_socks5_init HAS_SOCKS5_INIT /**/ + /* HAS_SQRTL: * This symbol, if defined, indicates that the sqrtl routine is * available to do long double square roots. @@ -2026,12 +2049,23 @@ sed <config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un- * This symbol is defined if the FILE_cnt macro can be used as an * lvalue. */ +/* STDIO_PTR_LVAL_SETS_CNT: + * This symbol is defined if using the FILE_ptr macro as an lvalue + * to increase the pointer by n has the side effect of decreasing the + * value of File_cnt(fp) by n. + */ +/* STDIO_PTR_LVAL_NOCHANGE_CNT: + * This symbol is defined if using the FILE_ptr macro as an lvalue + * to increase the pointer by n leaves File_cnt(fp) unchanged. + */ #$d_stdstdio USE_STDIO_PTR /**/ #ifdef USE_STDIO_PTR #define FILE_ptr(fp) $stdio_ptr #$d_stdio_ptr_lval STDIO_PTR_LVALUE /**/ #define FILE_cnt(fp) $stdio_cnt #$d_stdio_cnt_lval STDIO_CNT_LVALUE /**/ +#$d_stdio_ptr_lval_sets_cnt STDIO_PTR_LVAL_SETS_CNT /**/ +#$d_stdio_ptr_lval_nochange_cnt STDIO_PTR_LVAL_NOCHANGE_CNT /**/ #endif /* USE_STDIO_BASE: @@ -2224,6 +2258,12 @@ sed <config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un- */ #define Gid_t_f $gidformat /**/ +/* Gid_t_sign: + * This symbol holds the signedess of a Gid_t. + * 1 for unsigned, -1 for signed. + */ +#define Gid_t_sign $gidsign /* GID sign */ + /* Gid_t_size: * This symbol holds the size of a Gid_t in bytes. */ @@ -2233,19 +2273,19 @@ sed <config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un- * This symbol holds the return type of getgid() and the type of * argument to setrgid() and related functions. Typically, * it is the type of group ids in the kernel. It can be int, ushort, - * uid_t, etc... It may be necessary to include to get + * gid_t, etc... It may be necessary to include to get * any typedef'ed information. */ #define Gid_t $gidtype /* Type for getgid(), etc... */ /* Groups_t: * This symbol holds the type used for the second argument to - * getgroups() and setgropus(). Usually, this is the same as + * getgroups() and setgroups(). Usually, this is the same as * gidtype (gid_t) , but sometimes it isn't. - * It can be int, ushort, uid_t, etc... + * It can be int, ushort, gid_t, etc... * It may be necessary to include to get any * typedef'ed information. This is only required if you have - * getgroups() or setgropus().. + * getgroups() or setgroups().. */ #if defined(HAS_GETGROUPS) || defined(HAS_SETGROUPS) #define Groups_t $groupstype /* Type for 2nd arg to [sg]etgroups() */ @@ -2293,6 +2333,12 @@ sed <config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un- */ #$i_inttypes I_INTTYPES /**/ +/* I_LIBUTIL: + * This symbol, if defined, indicates that exists and + * should be included. + */ +#$i_libutil I_LIBUTIL /**/ + /* I_MACH_CTHREADS: * This symbol, if defined, indicates to the C program that it should * include . @@ -2323,6 +2369,12 @@ sed <config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un- */ #$i_poll I_POLL /**/ +/* I_PROT: + * This symbol, if defined, indicates that exists and + * should be included. + */ +#$i_prot I_PROT /**/ + /* I_PTHREAD: * This symbol, if defined, indicates to the C program that it should * include . @@ -2485,8 +2537,18 @@ sed <config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un- * This symbol, if defined, contains the string used by stdio to * format long doubles (format 'g') for output. */ +/* PERL_PRIeldbl: + * This symbol, if defined, contains the string used by stdio to + * format long doubles (format 'e') for output. + */ +/* PERL_SCNfldbl: + * This symbol, if defined, contains the string used by stdio to + * format long doubles (format 'f') for input. + */ #$d_PRIfldbl PERL_PRIfldbl $sPRIfldbl /**/ #$d_PRIgldbl PERL_PRIgldbl $sPRIgldbl /**/ +#$d_PRIeldbl PERL_PRIeldbl $sPRIeldbl /**/ +#$d_SCNfldbl PERL_SCNfldbl $sSCNfldbl /**/ /* Off_t: * This symbol holds the type used to declare offsets in the kernel. @@ -2574,6 +2636,16 @@ sed <config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un- #define Netdb_name_t $netdb_name_type /**/ #define Netdb_net_t $netdb_net_type /**/ +/* PERL_OTHERLIBDIRS: + * This variable contains a colon-separated set of paths for the perl + * binary to search for additional library files or modules. + * These directories will be tacked to the end of @INC. + * Perl will automatically search below each path for version- + * and architecture-specific directories. See PERL_INC_VERSION_LIST + * for more details. + */ +#$d_perl_otherlibdirs PERL_OTHERLIBDIRS "$otherlibdirs" /**/ + /* IVTYPE: * This symbol defines the C type used for Perl's IV. */ @@ -2637,9 +2709,16 @@ sed <config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un- /* U64SIZE: * This symbol contains the sizeof(U64). */ +/* NVSIZE: + * This symbol contains the sizeof(NV). + */ /* NV_PRESERVES_UV: * This symbol, if defined, indicates that a variable of type NVTYPE - * can preserve all the bit of a variable of type UVSIZE. + * can preserve all the bits of a variable of type UVTYPE. + */ +/* NV_PRESERVES_UV_BITS: + * This symbol contains the number of bits a variable of type NVTYPE + * can preserve of a variable of type UVTYPE. */ #define IVTYPE $ivtype /**/ #define UVTYPE $uvtype /**/ @@ -2666,7 +2745,9 @@ sed <config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un- #define I64SIZE $i64size /**/ #define U64SIZE $u64size /**/ #endif +#define NVSIZE $nvsize /**/ #$d_nv_preserves_uv NV_PRESERVES_UV +#define NV_PRESERVES_UV_BITS $d_nv_preserves_uv_bits /* IVdf: * This symbol defines the format string used for printing a Perl IV @@ -2682,12 +2763,27 @@ sed <config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un- */ /* UVxf: * This symbol defines the format string used for printing a Perl UV - * as an unsigned hexadecimal integer. + * as an unsigned hexadecimal integer in lowercase abcdef. + */ +/* NVef: + * This symbol defines the format string used for printing a Perl NV + * using %e-ish floating point format. + */ +/* NVff: + * This symbol defines the format string used for printing a Perl NV + * using %f-ish floating point format. + */ +/* NVgf: + * This symbol defines the format string used for printing a Perl NV + * using %g-ish floating point format. */ #define IVdf $ivdformat /**/ #define UVuf $uvuformat /**/ #define UVof $uvoformat /**/ #define UVxf $uvxformat /**/ +#define NVef $nveformat /**/ +#define NVff $nvfformat /**/ +#define NVgf $nvgformat /**/ /* Pid_t: * This symbol holds the type used to declare process ids in the kernel. @@ -2832,6 +2928,11 @@ sed <config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un- #define SITELIB_EXP "$sitelibexp" /**/ #define SITELIB_STEM "$sitelib_stem" /**/ +/* Size_t_size: + * This symbol holds the size of a Size_t in bytes. + */ +#define Size_t_size $sizesize /* */ + /* Size_t: * This symbol holds the type used to declare length parameters * for string functions. It is usually size_t, but may be @@ -2879,6 +2980,12 @@ sed <config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un- */ #define Uid_t_f $uidformat /**/ +/* Uid_t_sign: + * This symbol holds the signedess of a Uid_t. + * 1 for unsigned, -1 for signed. + */ +#define Uid_t_sign $uidsign /* UID sign */ + /* Uid_t_size: * This symbol holds the size of a Uid_t in bytes. */ @@ -3075,12 +3182,74 @@ sed <config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un- #define PERL_XS_APIVERSION "$xs_apiversion" #define PERL_PM_APIVERSION "$pm_apiversion" -/* HAS_LCHOWN: - * This symbol, if defined, indicates that the lchown routine is - * available to operate on a symbolic link (instead of following the - * link). +/* HAS_GETPGRP: + * This symbol, if defined, indicates that the getpgrp routine is + * available to get the current process group. */ -#$d_lchown HAS_LCHOWN /**/ +/* USE_BSD_GETPGRP: + * This symbol, if defined, indicates that getpgrp needs one + * arguments whereas USG one needs none. + */ +#$d_getpgrp HAS_GETPGRP /**/ +#$d_bsdgetpgrp USE_BSD_GETPGRP /**/ + +/* HAS_SETPGRP: + * This symbol, if defined, indicates that the setpgrp routine is + * available to set the current process group. + */ +/* USE_BSD_SETPGRP: + * This symbol, if defined, indicates that setpgrp needs two + * arguments whereas USG one needs none. See also HAS_SETPGID + * for a POSIX interface. + */ +#$d_setpgrp HAS_SETPGRP /**/ +#$d_bsdsetpgrp USE_BSD_SETPGRP /**/ + +/* STDCHAR: + * This symbol is defined to be the type of char used in stdio.h. + * It has the values "unsigned char" or "char". + */ +#define STDCHAR $stdchar /**/ + +/* HAS__FWALK: + * This symbol, if defined, indicates that the _fwalk system call is + * available to apply a function to all the file handles. + */ +#$d__fwalk HAS__FWALK /**/ + +/* FCNTL_CAN_LOCK: + * This symbol, if defined, indicates that fcntl() can be used + * for file locking. Normally on Unix systems this is defined. + * It may be undefined on VMS. + */ +#$d_fcntl_can_lock FCNTL_CAN_LOCK /**/ + +/* HAS_FSYNC: + * This symbol, if defined, indicates that the fsync routine is + * available to write a file's modified data and attributes to + * permanent storage. + */ +#$d_fsync HAS_FSYNC /**/ + +/* HAS_SBRK_PROTO: + * This symbol, if defined, indicates that the system provides + * a prototype for the sbrk() function. Otherwise, it is up + * to the program to supply one. Good guesses are + * extern void* sbrk _((int)); + * extern void* sbrk _((size_t)); + */ +#$d_sbrkproto HAS_SBRK_PROTO /**/ + +/* NEED_VA_COPY: + * This symbol, if defined, indicates that the system stores + * the variable argument list datatype, va_list, in a format + * that cannot be copied by simple assignment, so that some + * other means must be used when copying is required. + * As such systems vary in their provision (or non-provision) + * of copying mechanisms, handy.h defines a platform- + * independent macro, Perl_va_copy(src, dst), to do the job. + */ +#$need_va_copy NEED_VA_COPY /**/ #endif !GROK!THIS!