X-Git-Url: http://git.shadowcat.co.uk/gitweb/gitweb.cgi?a=blobdiff_plain;f=config_h.SH;h=232152e70f1559749a019cb57a285b3521ba8da7;hb=81f61c1a1801c3f63576c7bdd2b7e2b2f91cd51d;hp=a12916e59ec4200984b6cd17fdc815e213a62c7a;hpb=0545a864a6e98637ff6d2f3cd3c8e85ae311d4e6;p=p5sagit%2Fp5-mst-13.2.git diff --git a/config_h.SH b/config_h.SH index a12916e..232152e 100644 --- a/config_h.SH +++ b/config_h.SH @@ -1,29 +1,35 @@ -case $CONFIG in +case "$CONFIG_SH" in +'') CONFIG_SH=config.sh ;; +esac +case "$CONFIG_H" in +'') CONFIG_H=config.h ;; +esac +case $PERL_CONFIG_SH in '') - if test -f config.sh; then TOP=.; - elif test -f ../config.sh; then TOP=..; - elif test -f ../../config.sh; then TOP=../..; - elif test -f ../../../config.sh; then TOP=../../..; - elif test -f ../../../../config.sh; then TOP=../../../..; + if test -f $CONFIG_SH; then TOP=.; + elif test -f ../$CONFIG_SH; then TOP=..; + elif test -f ../../$CONFIG_SH; then TOP=../..; + elif test -f ../../../$CONFIG_SH; then TOP=../../..; + elif test -f ../../../../$CONFIG_SH; then TOP=../../../..; else - echo "Can't find config.sh."; exit 1 + echo "Can't find $CONFIG_SH."; exit 1 fi - . $TOP/config.sh + . $TOP/$CONFIG_SH ;; esac case "$0" in */*) cd `expr X$0 : 'X\(.*\)/'` ;; esac -echo "Extracting config.h (with variable substitutions)" -sed <config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un-def!#undef!' +echo "Extracting $CONFIG_H (with variable substitutions)" +sed <$CONFIG_H -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un-def!#undef!' /* * This file was produced by running the config_h.SH script, which - * gets its values from config.sh, which is generally produced by + * gets its values from $CONFIG_SH, which is generally produced by * running Configure. * * Feel free to modify any of this as the need arises. Note, however, * that running config_h.SH again will wipe out any changes you've made. - * For a more permanent change edit config.sh and rerun config_h.SH. + * For a more permanent change edit $CONFIG_SH and rerun config_h.SH. * * \$Id: Config_h.U,v 3.0.1.5 1997/02/28 14:57:43 ram Exp $ */ @@ -50,15 +56,6 @@ sed <config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un- */ #$d_alarm HAS_ALARM /**/ -/* HASATTRIBUTE: - * This symbol indicates the C compiler can check for function attributes, - * such as printf formats. This is normally only supported by GNU cc. - */ -#$d_attribut HASATTRIBUTE /**/ -#ifndef HASATTRIBUTE -#define __attribute__(_arg_) -#endif - /* HAS_BCMP: * This symbol is defined if the bcmp() routine is available to * compare blocks of memory. @@ -106,12 +103,6 @@ sed <config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un- #define const #endif -/* HAS_CRYPT: - * This symbol, if defined, indicates that the crypt routine is available - * to encrypt passwords and the like. - */ -#$d_crypt HAS_CRYPT /**/ - /* HAS_CUSERID: * This symbol, if defined, indicates that the cuserid routine is * available to get character login names. @@ -139,26 +130,6 @@ sed <config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un- */ #$d_dlerror HAS_DLERROR /**/ -/* SETUID_SCRIPTS_ARE_SECURE_NOW: - * This symbol, if defined, indicates that the bug that prevents - * setuid scripts from being secure is not present in this kernel. - */ -/* DOSUID: - * This symbol, if defined, indicates that the C program should - * check the script that it is executing for setuid/setgid bits, and - * attempt to emulate setuid/setgid on systems that have disabled - * setuid #! scripts because the kernel can't do it securely. - * It is up to the package designer to make sure that this emulation - * is done securely. Among other things, it should do an fstat on - * the script it just opened to make sure it really is a setuid/setgid - * script, it should make sure the arguments passed correspond exactly - * to the argument on the #! line, and it should not trust any - * subprocesses to which it must pass the filename rather than the - * file descriptor of the script to be executed. - */ -#$d_suidsafe SETUID_SCRIPTS_ARE_SECURE_NOW /**/ -#$d_dosuid DOSUID /**/ - /* HAS_DUP2: * This symbol, if defined, indicates that the dup2 routine is * available to duplicate file descriptors. @@ -189,12 +160,6 @@ sed <config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un- */ #$d_fgetpos HAS_FGETPOS /**/ -/* FLEXFILENAMES: - * This symbol, if defined, indicates that the system supports filenames - * longer than 14 characters. - */ -#$d_flexfnam FLEXFILENAMES /**/ - /* HAS_FLOCK: * This symbol, if defined, indicates that the flock routine is * available to do file locking. @@ -244,17 +209,6 @@ sed <config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un- */ #$d_getpgid HAS_GETPGID /**/ -/* HAS_GETPGRP: - * This symbol, if defined, indicates that the getpgrp routine is - * available to get the current process group. - */ -/* USE_BSD_GETPGRP: - * This symbol, if defined, indicates that getpgrp needs one - * arguments whereas USG one needs none. - */ -#$d_getpgrp HAS_GETPGRP /**/ -#$d_bsdgetpgrp USE_BSD_GETPGRP /**/ - /* HAS_GETPGRP2: * This symbol, if defined, indicates that the getpgrp2() (as in DG/UX) * routine is available to get the current process group. @@ -509,18 +463,6 @@ sed <config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un- */ #$d_setpgid HAS_SETPGID /**/ -/* HAS_SETPGRP: - * This symbol, if defined, indicates that the setpgrp routine is - * available to set the current process group. - */ -/* USE_BSD_SETPGRP: - * This symbol, if defined, indicates that setpgrp needs two - * arguments whereas USG one needs none. See also HAS_SETPGID - * for a POSIX interface. - */ -#$d_setpgrp HAS_SETPGRP /**/ -#$d_bsdsetpgrp USE_BSD_SETPGRP /**/ - /* HAS_SETPGRP2: * This symbol, if defined, indicates that the setpgrp2() (as in DG/UX) * routine is available to set the current process group. @@ -577,20 +519,6 @@ sed <config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un- */ #$d_setsid HAS_SETSID /**/ -/* Shmat_t: - * This symbol holds the return type of the shmat() system call. - * Usually set to 'void *' or 'char *'. - */ -/* HAS_SHMAT_PROTOTYPE: - * This symbol, if defined, indicates that the sys/shm.h includes - * a prototype for shmat(). Otherwise, it is up to the program to - * guess one. Shmat_t shmat _((int, Shmat_t, int)) is a good guess, - * but not always right so it should be emitted by the program only - * when HAS_SHMAT_PROTOTYPE is not defined to avoid conflicting defs. - */ -#define Shmat_t $shmattype /**/ -#$d_shmatprototype HAS_SHMAT_PROTOTYPE /**/ - /* HAS_STRCHR: * This symbol is defined to indicate that the strchr()/strrchr() * functions are available for string searching. If not, try the @@ -628,12 +556,6 @@ sed <config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un- */ #$d_strtol HAS_STRTOL /**/ -/* HAS_STRTOUL: - * This symbol, if defined, indicates that the strtoul routine is - * available to provide conversion of strings to unsigned long. - */ -#$d_strtoul HAS_STRTOUL /**/ - /* HAS_STRXFRM: * This symbol, if defined, indicates that the strxfrm() routine is * available to transform strings. @@ -694,6 +616,12 @@ sed <config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un- */ #$d_umask HAS_UMASK /**/ +/* HAS_USLEEP: + * This symbol, if defined, indicates that the usleep routine is + * available to let the process sleep on a sub-second accuracy. + */ +#$d_usleep HAS_USLEEP /**/ + /* HASVOLATILE: * This symbol, if defined, indicates that this C compiler knows about * the volatile declaration. @@ -806,12 +734,6 @@ sed <config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un- */ #$i_memory I_MEMORY /**/ -/* I_NDBM: - * This symbol, if defined, indicates that exists and should - * be included. - */ -#$i_ndbm I_NDBM /**/ - /* I_NET_ERRNO: * This symbol, if defined, indicates that exists and * should be included. @@ -864,7 +786,12 @@ sed <config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un- * This symbol, if defined, indicates that exists and should * be included. Otherwise, include or . */ +/* I_SYS_SOCKIO: + * This symbol, if defined, indicates the should be included + * to get socket ioctl options, like SIOCATMARK. + */ #$i_sysioctl I_SYS_IOCTL /**/ +#$i_syssockio I_SYS_SOCKIO /**/ /* I_SYS_NDIR: * This symbol, if defined, indicates to the C program that it should @@ -960,56 +887,12 @@ sed <config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un- */ #$i_values I_VALUES /**/ -/* I_STDARG: - * This symbol, if defined, indicates that exists and should - * be included. - */ -/* I_VARARGS: - * This symbol, if defined, indicates to the C program that it should - * include . - */ -#$i_stdarg I_STDARG /**/ -#$i_varargs I_VARARGS /**/ - /* I_VFORK: * This symbol, if defined, indicates to the C program that it should * include vfork.h. */ #$i_vfork I_VFORK /**/ -/* CAN_PROTOTYPE: - * If defined, this macro indicates that the C compiler can handle - * function prototypes. - */ -/* _: - * This macro is used to declare function parameters for folks who want - * to make declarations with prototypes using a different style than - * the above macros. Use double parentheses. For example: - * - * int main _((int argc, char *argv[])); - */ -#$prototype CAN_PROTOTYPE /**/ -#ifdef CAN_PROTOTYPE -#define _(args) args -#else -#define _(args) () -#endif - -/* SH_PATH: - * This symbol contains the full pathname to the shell used on this - * on this system to execute Bourne shell scripts. Usually, this will be - * /bin/sh, though it's possible that some systems will have /bin/ksh, - * /bin/pdksh, /bin/ash, /bin/bash, or even something such as - * D:/bin/sh.exe. - */ -#define SH_PATH "$sh" /**/ - -/* STDCHAR: - * This symbol is defined to be the type of char used in stdio.h. - * It has the values "unsigned char" or "char". - */ -#define STDCHAR $stdchar /**/ - /* HAS_ACCESSX: * This symbol, if defined, indicates that the accessx routine is * available to do extended access checks. @@ -1034,27 +917,30 @@ sed <config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un- */ #$i_syssecrt I_SYS_SECURITY /**/ -/* CROSSCOMPILE: - * This symbol, if defined, signifies that we our - * build process is a cross-compilation. +/* OSNAME: + * This symbol contains the name of the operating system, as determined + * by Configure. You shouldn't rely on it too much; the specific + * feature tests from Configure are generally more reliable. */ -#$crosscompile CROSSCOMPILE /**/ - -/* INTSIZE: - * This symbol contains the value of sizeof(int) so that the C - * preprocessor can make decisions based on it. +/* OSVERS: + * This symbol contains the version of the operating system, as determined + * by Configure. You shouldn't rely on it too much; the specific + * feature tests from Configure are generally more reliable. */ -/* LONGSIZE: - * This symbol contains the value of sizeof(long) so that the C - * preprocessor can make decisions based on it. +#define OSNAME "$osname" /**/ +#define OSVERS "$osvers" /**/ + +/* USE_CROSS_COMPILE: + * This symbol, if defined, indicates that Perl is being cross-compiled. */ -/* SHORTSIZE: - * This symbol contains the value of sizeof(short) so that the C - * preprocessor can make decisions based on it. +/* PERL_TARGETARCH: + * This symbol, if defined, indicates the target architecture + * Perl has been cross-compiled to. Undefined if not a cross-compile. */ -#define INTSIZE $intsize /**/ -#define LONGSIZE $longsize /**/ -#define SHORTSIZE $shortsize /**/ +#ifndef USE_CROSS_COMPILE +#$usecrosscompile USE_CROSS_COMPILE /**/ +#define PERL_TARGETARCH "$targetarch" /**/ +#endif /* MULTIARCH: * This symbol, if defined, signifies that the build @@ -1067,18 +953,81 @@ sed <config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un- /* MEM_ALIGNBYTES: * This symbol contains the number of bytes required to align a - * double. Usual values are 2, 4 and 8. The default is eight, - * for safety. + * double, or a long double when applicable. Usual values are 2, + * 4 and 8. The default is eight, for safety. */ -#if defined(CROSSCOMPILE) || defined(MULTIARCH) +#if defined(USE_CROSS_COMPILE) || defined(MULTIARCH) # define MEM_ALIGNBYTES 8 #else #define MEM_ALIGNBYTES $alignbytes #endif +/* ARCHLIB: + * This variable, if defined, holds the name of the directory in + * which the user wants to put architecture-dependent public + * library files for $package. It is most often a local directory + * such as /usr/local/lib. Programs using this variable must be + * prepared to deal with filename expansion. If ARCHLIB is the + * same as PRIVLIB, it is not defined, since presumably the + * program already searches PRIVLIB. + */ +/* ARCHLIB_EXP: + * This symbol contains the ~name expanded version of ARCHLIB, to be used + * in programs that are not prepared to deal with ~ expansion at run-time. + */ +#$d_archlib ARCHLIB "$archlib" /**/ +#$d_archlib ARCHLIB_EXP "$archlibexp" /**/ + +/* ARCHNAME: + * This symbol holds a string representing the architecture name. + * It may be used to construct an architecture-dependant pathname + * where library files may be held under a private library, for + * instance. + */ +#define ARCHNAME "$archname" /**/ + +/* HAS_ATOLF: + * This symbol, if defined, indicates that the atolf routine is + * available to convert strings into long doubles. + */ +#$d_atolf HAS_ATOLF /**/ + +/* HAS_ATOLL: + * This symbol, if defined, indicates that the atoll routine is + * available to convert strings into long longs. + */ +#$d_atoll HAS_ATOLL /**/ + +/* BIN: + * This symbol holds the path of the bin directory where the package will + * be installed. Program must be prepared to deal with ~name substitution. + */ +/* BIN_EXP: + * This symbol is the filename expanded version of the BIN symbol, for + * programs that do not want to deal with that at run-time. + */ +#define BIN "$bin" /**/ +#define BIN_EXP "$binexp" /**/ + +/* INTSIZE: + * This symbol contains the value of sizeof(int) so that the C + * preprocessor can make decisions based on it. + */ +/* LONGSIZE: + * This symbol contains the value of sizeof(long) so that the C + * preprocessor can make decisions based on it. + */ +/* SHORTSIZE: + * This symbol contains the value of sizeof(short) so that the C + * preprocessor can make decisions based on it. + */ +#define INTSIZE $intsize /**/ +#define LONGSIZE $longsize /**/ +#define SHORTSIZE $shortsize /**/ + /* BYTEORDER: * This symbol holds the hexadecimal constant defined in byteorder, - * i.e. 0x1234 or 0x4321, etc... + * in a UV, i.e. 0x1234 or 0x4321 or 0x12345678, etc... * If the compiler supports cross-compiling or multiple-architecture * binaries (eg. on NeXT systems), use compiler-defined macros to * determine the byte order. @@ -1092,7 +1041,7 @@ sed <config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un- * so the default case (for NeXT) is big endian to catch them. * This might matter for NeXT 3.0. */ -#if defined(CROSSCOMPILE) || defined(MULTIARCH) +#if defined(USE_CROSS_COMPILE) || defined(MULTIARCH) # ifdef __LITTLE_ENDIAN__ # if LONGSIZE == 4 # define BYTEORDER 0x1234 @@ -1119,39 +1068,402 @@ sed <config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un- #define BYTEORDER 0x$byteorder /* large digits for MSB */ #endif /* NeXT */ -/* CASTI32: - * This symbol is defined if the C compiler can cast negative - * or large floating point numbers to 32-bit ints. - */ -#$d_casti32 CASTI32 /**/ - -/* CASTNEGFLOAT: - * This symbol is defined if the C compiler can cast negative - * numbers to unsigned longs, ints and shorts. +/* CAT2: + * This macro concatenates 2 tokens together. */ -/* CASTFLAGS: - * This symbol contains flags that say what difficulties the compiler - * has casting odd floating values to unsigned long: - * 0 = ok - * 1 = couldn't cast < 0 - * 2 = couldn't cast >= 0x80000000 - * 4 = couldn't cast in argument expression list +/* STRINGIFY: + * This macro surrounds its token with double quotes. */ -#$d_castneg CASTNEGFLOAT /**/ -#define CASTFLAGS $castflags /**/ +#if $cpp_stuff == 1 +#define CAT2(a,b) a/**/b +#define STRINGIFY(a) "a" + /* If you can get stringification with catify, tell me how! */ +#endif +#if $cpp_stuff == 42 +#define PeRl_CaTiFy(a, b) a ## b +#define PeRl_StGiFy(a) #a +/* the additional level of indirection enables these macros to be + * used as arguments to other macros. See K&R 2nd ed., page 231. */ +#define CAT2(a,b) PeRl_CaTiFy(a,b) +#define StGiFy(a) PeRl_StGiFy(a) +#define STRINGIFY(a) PeRl_StGiFy(a) +#endif +#if $cpp_stuff != 1 && $cpp_stuff != 42 +# include "Bletch: How does this C preprocessor concatenate tokens?" +#endif -/* VOID_CLOSEDIR: - * This symbol, if defined, indicates that the closedir() routine - * does not return a value. +/* CPPSTDIN: + * This symbol contains the first part of the string which will invoke + * the C preprocessor on the standard input and produce to standard + * output. Typical value of "cc -E" or "/lib/cpp", but it can also + * call a wrapper. See CPPRUN. */ -#$d_void_closedir VOID_CLOSEDIR /**/ - -/* HAS_FD_SET: +/* CPPMINUS: + * This symbol contains the second part of the string which will invoke + * the C preprocessor on the standard input and produce to standard + * output. This symbol will have the value "-" if CPPSTDIN needs a minus + * to specify standard input, otherwise the value is "". + */ +/* CPPRUN: + * This symbol contains the string which will invoke a C preprocessor on + * the standard input and produce to standard output. It needs to end + * with CPPLAST, after all other preprocessor flags have been specified. + * The main difference with CPPSTDIN is that this program will never be a + * pointer to a shell wrapper, i.e. it will be empty if no preprocessor is + * available directly to the user. Note that it may well be different from + * the preprocessor used to compile the C program. + */ +/* CPPLAST: + * This symbol is intended to be used along with CPPRUN in the same manner + * symbol CPPMINUS is used with CPPSTDIN. It contains either "-" or "". + */ +#define CPPSTDIN "$cppstdin" +#define CPPMINUS "$cppminus" +#define CPPRUN "$cpprun" +#define CPPLAST "$cpplast" + +/* HAS__FWALK: + * This symbol, if defined, indicates that the _fwalk system call is + * available to apply a function to all the file handles. + */ +#$d__fwalk HAS__FWALK /**/ + +/* HAS_ACCESS: + * This manifest constant lets the C program know that the access() + * system call is available to check for accessibility using real UID/GID. + * (always present on UNIX.) + */ +#$d_access HAS_ACCESS /**/ + +/* HAS_ASCTIME_R: + * This symbol, if defined, indicates that the asctime_r routine + * is available to asctime re-entrantly. + */ +/* ASCTIME_R_PROTO: + * This symbol encodes the prototype of asctime_r. + * It is zero if d_asctime_r is undef, and one of the + * REENTRANT_PROTO_T_ABC macros of reentr.h if d_asctime_r + * is defined. + */ +#$d_asctime_r HAS_ASCTIME_R /**/ +#define ASCTIME_R_PROTO $asctime_r_proto /**/ + +/* CASTI32: + * This symbol is defined if the C compiler can cast negative + * or large floating point numbers to 32-bit ints. + */ +#$d_casti32 CASTI32 /**/ + +/* CASTNEGFLOAT: + * This symbol is defined if the C compiler can cast negative + * numbers to unsigned longs, ints and shorts. + */ +/* CASTFLAGS: + * This symbol contains flags that say what difficulties the compiler + * has casting odd floating values to unsigned long: + * 0 = ok + * 1 = couldn't cast < 0 + * 2 = couldn't cast >= 0x80000000 + * 4 = couldn't cast in argument expression list + */ +#$d_castneg CASTNEGFLOAT /**/ +#define CASTFLAGS $castflags /**/ + +/* HAS_CLASS: + * This symbol, if defined, indicates that the class routine is + * available to classify doubles. Available for example in AIX. + * The returned values are defined in and are: + * + * FP_PLUS_NORM Positive normalized, nonzero + * FP_MINUS_NORM Negative normalized, nonzero + * FP_PLUS_DENORM Positive denormalized, nonzero + * FP_MINUS_DENORM Negative denormalized, nonzero + * FP_PLUS_ZERO +0.0 + * FP_MINUS_ZERO -0.0 + * FP_PLUS_INF +INF + * FP_MINUS_INF -INF + * FP_NANS Signaling Not a Number (NaNS) + * FP_NANQ Quiet Not a Number (NaNQ) + */ +#$d_class HAS_CLASS /**/ + +/* VOID_CLOSEDIR: + * This symbol, if defined, indicates that the closedir() routine + * does not return a value. + */ +#$d_void_closedir VOID_CLOSEDIR /**/ + +/* HAS_STRUCT_CMSGHDR: + * This symbol, if defined, indicates that the struct cmsghdr + * is supported. + */ +#$d_cmsghdr_s HAS_STRUCT_CMSGHDR /**/ + +/* HAS_CRYPT_R: + * This symbol, if defined, indicates that the crypt_r routine + * is available to crypt re-entrantly. + */ +/* CRYPT_R_PROTO: + * This symbol encodes the prototype of crypt_r. + * It is zero if d_crypt_r is undef, and one of the + * REENTRANT_PROTO_T_ABC macros of reentr.h if d_crypt_r + * is defined. + */ +#$d_crypt_r HAS_CRYPT_R /**/ +#define CRYPT_R_PROTO $crypt_r_proto /**/ + +/* HAS_CSH: + * This symbol, if defined, indicates that the C-shell exists. + */ +/* CSH: + * This symbol, if defined, contains the full pathname of csh. + */ +#$d_csh HAS_CSH /**/ +#ifdef HAS_CSH +#define CSH "$full_csh" /**/ +#endif + +/* HAS_CTIME_R: + * This symbol, if defined, indicates that the ctime_r routine + * is available to ctime re-entrantly. + */ +/* CTIME_R_PROTO: + * This symbol encodes the prototype of ctime_r. + * It is zero if d_ctime_r is undef, and one of the + * REENTRANT_PROTO_T_ABC macros of reentr.h if d_ctime_r + * is defined. + */ +#$d_ctime_r HAS_CTIME_R /**/ +#define CTIME_R_PROTO $ctime_r_proto /**/ + +/* DLSYM_NEEDS_UNDERSCORE: + * This symbol, if defined, indicates that we need to prepend an + * underscore to the symbol name before calling dlsym(). This only + * makes sense if you *have* dlsym, which we will presume is the + * case if you're using dl_dlopen.xs. + */ +#$d_dlsymun DLSYM_NEEDS_UNDERSCORE /**/ + +/* HAS_DRAND48_R: + * This symbol, if defined, indicates that the drand48_r routine + * is available to drand48 re-entrantly. + */ +/* DRAND48_R_PROTO: + * This symbol encodes the prototype of drand48_r. + * It is zero if d_drand48_r is undef, and one of the + * REENTRANT_PROTO_T_ABC macros of reentr.h if d_drand48_r + * is defined. + */ +#$d_drand48_r HAS_DRAND48_R /**/ +#define DRAND48_R_PROTO $drand48_r_proto /**/ + +/* HAS_DRAND48_PROTO: + * This symbol, if defined, indicates that the system provides + * a prototype for the drand48() function. Otherwise, it is up + * to the program to supply one. A good guess is + * extern double drand48(void); + */ +#$d_drand48proto HAS_DRAND48_PROTO /**/ + +/* HAS_ENDGRENT: + * This symbol, if defined, indicates that the getgrent routine is + * available for finalizing sequential access of the group database. + */ +#$d_endgrent HAS_ENDGRENT /**/ + +/* HAS_ENDGRENT_R: + * This symbol, if defined, indicates that the endgrent_r routine + * is available to endgrent re-entrantly. + */ +/* ENDGRENT_R_PROTO: + * This symbol encodes the prototype of endgrent_r. + * It is zero if d_endgrent_r is undef, and one of the + * REENTRANT_PROTO_T_ABC macros of reentr.h if d_endgrent_r + * is defined. + */ +#$d_endgrent_r HAS_ENDGRENT_R /**/ +#define ENDGRENT_R_PROTO $endgrent_r_proto /**/ + +/* HAS_ENDHOSTENT: + * This symbol, if defined, indicates that the endhostent() routine is + * available to close whatever was being used for host queries. + */ +#$d_endhent HAS_ENDHOSTENT /**/ + +/* HAS_ENDNETENT: + * This symbol, if defined, indicates that the endnetent() routine is + * available to close whatever was being used for network queries. + */ +#$d_endnent HAS_ENDNETENT /**/ + +/* HAS_ENDPROTOENT: + * This symbol, if defined, indicates that the endprotoent() routine is + * available to close whatever was being used for protocol queries. + */ +#$d_endpent HAS_ENDPROTOENT /**/ + +/* HAS_ENDPWENT: + * This symbol, if defined, indicates that the getgrent routine is + * available for finalizing sequential access of the passwd database. + */ +#$d_endpwent HAS_ENDPWENT /**/ + +/* HAS_ENDPWENT_R: + * This symbol, if defined, indicates that the endpwent_r routine + * is available to endpwent re-entrantly. + */ +/* ENDPWENT_R_PROTO: + * This symbol encodes the prototype of endpwent_r. + * It is zero if d_endpwent_r is undef, and one of the + * REENTRANT_PROTO_T_ABC macros of reentr.h if d_endpwent_r + * is defined. + */ +#$d_endpwent_r HAS_ENDPWENT_R /**/ +#define ENDPWENT_R_PROTO $endpwent_r_proto /**/ + +/* HAS_ENDSERVENT: + * This symbol, if defined, indicates that the endservent() routine is + * available to close whatever was being used for service queries. + */ +#$d_endsent HAS_ENDSERVENT /**/ + +/* HAS_FCHDIR: + * This symbol, if defined, indicates that the fchdir routine is + * available to change directory using a file descriptor. + */ +#$d_fchdir HAS_FCHDIR /**/ + +/* FCNTL_CAN_LOCK: + * This symbol, if defined, indicates that fcntl() can be used + * for file locking. Normally on Unix systems this is defined. + * It may be undefined on VMS. + */ +#$d_fcntl_can_lock FCNTL_CAN_LOCK /**/ + +/* HAS_FD_SET: * This symbol, when defined, indicates presence of the fd_set typedef * in */ #$d_fd_set HAS_FD_SET /**/ +/* HAS_FINITE: + * This symbol, if defined, indicates that the finite routine is + * available to check whether a double is finite (non-infinity non-NaN). + */ +#$d_finite HAS_FINITE /**/ + +/* HAS_FINITEL: + * This symbol, if defined, indicates that the finitel routine is + * available to check whether a long double is finite + * (non-infinity non-NaN). + */ +#$d_finitel HAS_FINITEL /**/ + +/* FLEXFILENAMES: + * This symbol, if defined, indicates that the system supports filenames + * longer than 14 characters. + */ +#$d_flexfnam FLEXFILENAMES /**/ + +/* HAS_FP_CLASS: + * This symbol, if defined, indicates that the fp_class routine is + * available to classify doubles. Available for example in Digital UNIX. + * The returned values are defined in and are: + * + * FP_SNAN Signaling NaN (Not-a-Number) + * FP_QNAN Quiet NaN (Not-a-Number) + * FP_POS_INF +infinity + * FP_NEG_INF -infinity + * FP_POS_NORM Positive normalized + * FP_NEG_NORM Negative normalized + * FP_POS_DENORM Positive denormalized + * FP_NEG_DENORM Negative denormalized + * FP_POS_ZERO +0.0 (positive zero) + * FP_NEG_ZERO -0.0 (negative zero) + */ +#$d_fp_class HAS_FP_CLASS /**/ + +/* HAS_FPCLASS: + * This symbol, if defined, indicates that the fpclass routine is + * available to classify doubles. Available for example in Solaris/SVR4. + * The returned values are defined in and are: + * + * FP_SNAN signaling NaN + * FP_QNAN quiet NaN + * FP_NINF negative infinity + * FP_PINF positive infinity + * FP_NDENORM negative denormalized non-zero + * FP_PDENORM positive denormalized non-zero + * FP_NZERO negative zero + * FP_PZERO positive zero + * FP_NNORM negative normalized non-zero + * FP_PNORM positive normalized non-zero + */ +#$d_fpclass HAS_FPCLASS /**/ + +/* HAS_FPCLASSIFY: + * This symbol, if defined, indicates that the fpclassify routine is + * available to classify doubles. Available for example in HP-UX. + * The returned values are defined in and are + * + * FP_NORMAL Normalized + * FP_ZERO Zero + * FP_INFINITE Infinity + * FP_SUBNORMAL Denormalized + * FP_NAN NaN + * + */ +#$d_fpclassify HAS_FPCLASSIFY /**/ + +/* HAS_FPOS64_T: + * This symbol will be defined if the C compiler supports fpos64_t. + */ +#$d_fpos64_t HAS_FPOS64_T /**/ + +/* HAS_FREXPL: + * This symbol, if defined, indicates that the frexpl routine is + * available to break a long double floating-point number into + * a normalized fraction and an integral power of 2. + */ +#$d_frexpl HAS_FREXPL /**/ + +/* HAS_STRUCT_FS_DATA: + * This symbol, if defined, indicates that the struct fs_data + * to do statfs() is supported. + */ +#$d_fs_data_s HAS_STRUCT_FS_DATA /**/ + +/* HAS_FSEEKO: + * This symbol, if defined, indicates that the fseeko routine is + * available to fseek beyond 32 bits (useful for ILP32 hosts). + */ +#$d_fseeko HAS_FSEEKO /**/ + +/* HAS_FSTATFS: + * This symbol, if defined, indicates that the fstatfs routine is + * available to stat filesystems by file descriptors. + */ +#$d_fstatfs HAS_FSTATFS /**/ + +/* HAS_FSYNC: + * This symbol, if defined, indicates that the fsync routine is + * available to write a file's modified data and attributes to + * permanent storage. + */ +#$d_fsync HAS_FSYNC /**/ + +/* HAS_FTELLO: + * This symbol, if defined, indicates that the ftello routine is + * available to ftell beyond 32 bits (useful for ILP32 hosts). + */ +#$d_ftello HAS_FTELLO /**/ + +/* HAS_FUTIMES: + * This symbol, if defined, indicates that the futimes routine is + * available to change file descriptor time stamps with struct timevals. + */ +#$d_futimes HAS_FUTIMES /**/ + /* Gconvert: * This preprocessor macro is defined to convert a floating point * number to a string without a trailing decimal point. This @@ -1161,7 +1473,7 @@ sed <config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un- * a macro using sprintf("%g") is used. Arguments for the Gconvert * macro are: value, number of digits, whether trailing zeros should * be retained, and the output buffer. - * Possible values are: + * The usual values are: * d_Gconvert='gconvert((x),(n),(t),(b))' * d_Gconvert='gcvt((x),(n),(b))' * d_Gconvert='sprintf((b),"%.*g",(n),(x))' @@ -1169,89 +1481,972 @@ sed <config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un- */ #define Gconvert(x,n,t,b) $d_Gconvert -/* HAS_GNULIBC: - * This symbol, if defined, indicates to the C program that - * the GNU C library is being used. +/* HAS_GETCWD: + * This symbol, if defined, indicates that the getcwd routine is + * available to get the current working directory. */ -#$d_gnulibc HAS_GNULIBC /**/ -/* HAS_ISASCII: - * This manifest constant lets the C program know that isascii - * is available. +#$d_getcwd HAS_GETCWD /**/ + +/* HAS_GETESPWNAM: + * This symbol, if defined, indicates that the getespwnam system call is + * available to retrieve enchanced (shadow) password entries by name. */ -#$d_isascii HAS_ISASCII /**/ +#$d_getespwnam HAS_GETESPWNAM /**/ -/* HAS_LCHOWN: - * This symbol, if defined, indicates that the lchown routine is - * available to operate on a symbolic link (instead of following the - * link). +/* HAS_GETFSSTAT: + * This symbol, if defined, indicates that the getfsstat routine is + * available to stat filesystems in bulk. */ -#$d_lchown HAS_LCHOWN /**/ +#$d_getfsstat HAS_GETFSSTAT /**/ + +/* HAS_GETGRENT: + * This symbol, if defined, indicates that the getgrent routine is + * available for sequential access of the group database. + */ +#$d_getgrent HAS_GETGRENT /**/ + +/* HAS_GETGRENT_R: + * This symbol, if defined, indicates that the getgrent_r routine + * is available to getgrent re-entrantly. + */ +/* GETGRENT_R_PROTO: + * This symbol encodes the prototype of getgrent_r. + * It is zero if d_getgrent_r is undef, and one of the + * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getgrent_r + * is defined. + */ +#$d_getgrent_r HAS_GETGRENT_R /**/ +#define GETGRENT_R_PROTO $getgrent_r_proto /**/ + +/* HAS_GETGRGID_R: + * This symbol, if defined, indicates that the getgrgid_r routine + * is available to getgrgid re-entrantly. + */ +/* GETGRGID_R_PROTO: + * This symbol encodes the prototype of getgrgid_r. + * It is zero if d_getgrgid_r is undef, and one of the + * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getgrgid_r + * is defined. + */ +#$d_getgrgid_r HAS_GETGRGID_R /**/ +#define GETGRGID_R_PROTO $getgrgid_r_proto /**/ + +/* HAS_GETGRNAM_R: + * This symbol, if defined, indicates that the getgrnam_r routine + * is available to getgrnam re-entrantly. + */ +/* GETGRNAM_R_PROTO: + * This symbol encodes the prototype of getgrnam_r. + * It is zero if d_getgrnam_r is undef, and one of the + * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getgrnam_r + * is defined. + */ +#$d_getgrnam_r HAS_GETGRNAM_R /**/ +#define GETGRNAM_R_PROTO $getgrnam_r_proto /**/ + +/* HAS_GETHOSTBYADDR: + * This symbol, if defined, indicates that the gethostbyaddr() routine is + * available to look up hosts by their IP addresses. + */ +#$d_gethbyaddr HAS_GETHOSTBYADDR /**/ + +/* HAS_GETHOSTBYNAME: + * This symbol, if defined, indicates that the gethostbyname() routine is + * available to look up host names in some data base or other. + */ +#$d_gethbyname HAS_GETHOSTBYNAME /**/ + +/* HAS_GETHOSTENT: + * This symbol, if defined, indicates that the gethostent() routine is + * available to look up host names in some data base or another. + */ +#$d_gethent HAS_GETHOSTENT /**/ + +/* HAS_GETHOSTNAME: + * This symbol, if defined, indicates that the C program may use the + * gethostname() routine to derive the host name. See also HAS_UNAME + * and PHOSTNAME. + */ +/* HAS_UNAME: + * This symbol, if defined, indicates that the C program may use the + * uname() routine to derive the host name. See also HAS_GETHOSTNAME + * and PHOSTNAME. + */ +/* PHOSTNAME: + * This symbol, if defined, indicates the command to feed to the + * popen() routine to derive the host name. See also HAS_GETHOSTNAME + * and HAS_UNAME. Note that the command uses a fully qualified path, + * so that it is safe even if used by a process with super-user + * privileges. + */ +/* HAS_PHOSTNAME: + * This symbol, if defined, indicates that the C program may use the + * contents of PHOSTNAME as a command to feed to the popen() routine + * to derive the host name. + */ +#$d_gethname HAS_GETHOSTNAME /**/ +#$d_uname HAS_UNAME /**/ +#$d_phostname HAS_PHOSTNAME /**/ +#ifdef HAS_PHOSTNAME +#define PHOSTNAME "$aphostname" /* How to get the host name */ +#endif + +/* HAS_GETHOST_PROTOS: + * This symbol, if defined, indicates that includes + * prototypes for gethostent(), gethostbyname(), and + * gethostbyaddr(). Otherwise, it is up to the program to guess + * them. See netdbtype.U for probing for various Netdb_xxx_t types. + */ +#$d_gethostprotos HAS_GETHOST_PROTOS /**/ + +/* HAS_GETITIMER: + * This symbol, if defined, indicates that the getitimer routine is + * available to return interval timers. + */ +#$d_getitimer HAS_GETITIMER /**/ + +/* HAS_GETLOGIN_R: + * This symbol, if defined, indicates that the getlogin_r routine + * is available to getlogin re-entrantly. + */ +/* GETLOGIN_R_PROTO: + * This symbol encodes the prototype of getlogin_r. + * It is zero if d_getlogin_r is undef, and one of the + * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getlogin_r + * is defined. + */ +#$d_getlogin_r HAS_GETLOGIN_R /**/ +#define GETLOGIN_R_PROTO $getlogin_r_proto /**/ + +/* HAS_GETMNT: + * This symbol, if defined, indicates that the getmnt routine is + * available to get filesystem mount info by filename. + */ +#$d_getmnt HAS_GETMNT /**/ + +/* HAS_GETMNTENT: + * This symbol, if defined, indicates that the getmntent routine is + * available to iterate through mounted file systems to get their info. + */ +#$d_getmntent HAS_GETMNTENT /**/ + +/* HAS_GETNETBYADDR: + * This symbol, if defined, indicates that the getnetbyaddr() routine is + * available to look up networks by their IP addresses. + */ +#$d_getnbyaddr HAS_GETNETBYADDR /**/ + +/* HAS_GETNETBYNAME: + * This symbol, if defined, indicates that the getnetbyname() routine is + * available to look up networks by their names. + */ +#$d_getnbyname HAS_GETNETBYNAME /**/ + +/* HAS_GETNETENT: + * This symbol, if defined, indicates that the getnetent() routine is + * available to look up network names in some data base or another. + */ +#$d_getnent HAS_GETNETENT /**/ + +/* HAS_GETNET_PROTOS: + * This symbol, if defined, indicates that includes + * prototypes for getnetent(), getnetbyname(), and + * getnetbyaddr(). Otherwise, it is up to the program to guess + * them. See netdbtype.U for probing for various Netdb_xxx_t types. + */ +#$d_getnetprotos HAS_GETNET_PROTOS /**/ + +/* HAS_GETPAGESIZE: + * This symbol, if defined, indicates that the getpagesize system call + * is available to get system page size, which is the granularity of + * many memory management calls. + */ +#$d_getpagsz HAS_GETPAGESIZE /**/ + +/* HAS_GETPROTOENT: + * This symbol, if defined, indicates that the getprotoent() routine is + * available to look up protocols in some data base or another. + */ +#$d_getpent HAS_GETPROTOENT /**/ + +/* HAS_GETPGRP: + * This symbol, if defined, indicates that the getpgrp routine is + * available to get the current process group. + */ +/* USE_BSD_GETPGRP: + * This symbol, if defined, indicates that getpgrp needs one + * arguments whereas USG one needs none. + */ +#$d_getpgrp HAS_GETPGRP /**/ +#$d_bsdgetpgrp USE_BSD_GETPGRP /**/ + +/* HAS_GETPROTOBYNAME: + * This symbol, if defined, indicates that the getprotobyname() + * routine is available to look up protocols by their name. + */ +/* HAS_GETPROTOBYNUMBER: + * This symbol, if defined, indicates that the getprotobynumber() + * routine is available to look up protocols by their number. + */ +#$d_getpbyname HAS_GETPROTOBYNAME /**/ +#$d_getpbynumber HAS_GETPROTOBYNUMBER /**/ + +/* HAS_GETPROTO_PROTOS: + * This symbol, if defined, indicates that includes + * prototypes for getprotoent(), getprotobyname(), and + * getprotobyaddr(). Otherwise, it is up to the program to guess + * them. See netdbtype.U for probing for various Netdb_xxx_t types. + */ +#$d_getprotoprotos HAS_GETPROTO_PROTOS /**/ + +/* HAS_GETPRPWNAM: + * This symbol, if defined, indicates that the getprpwnam system call is + * available to retrieve protected (shadow) password entries by name. + */ +#$d_getprpwnam HAS_GETPRPWNAM /**/ + +/* HAS_GETPWENT: + * This symbol, if defined, indicates that the getpwent routine is + * available for sequential access of the passwd database. + * If this is not available, the older getpw() function may be available. + */ +#$d_getpwent HAS_GETPWENT /**/ + +/* HAS_GETPWENT_R: + * This symbol, if defined, indicates that the getpwent_r routine + * is available to getpwent re-entrantly. + */ +/* GETPWENT_R_PROTO: + * This symbol encodes the prototype of getpwent_r. + * It is zero if d_getpwent_r is undef, and one of the + * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getpwent_r + * is defined. + */ +#$d_getpwent_r HAS_GETPWENT_R /**/ +#define GETPWENT_R_PROTO $getpwent_r_proto /**/ + +/* HAS_GETPWNAM_R: + * This symbol, if defined, indicates that the getpwnam_r routine + * is available to getpwnam re-entrantly. + */ +/* GETPWNAM_R_PROTO: + * This symbol encodes the prototype of getpwnam_r. + * It is zero if d_getpwnam_r is undef, and one of the + * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getpwnam_r + * is defined. + */ +#$d_getpwnam_r HAS_GETPWNAM_R /**/ +#define GETPWNAM_R_PROTO $getpwnam_r_proto /**/ + +/* HAS_GETPWUID_R: + * This symbol, if defined, indicates that the getpwuid_r routine + * is available to getpwuid re-entrantly. + */ +/* GETPWUID_R_PROTO: + * This symbol encodes the prototype of getpwuid_r. + * It is zero if d_getpwuid_r is undef, and one of the + * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getpwuid_r + * is defined. + */ +#$d_getpwuid_r HAS_GETPWUID_R /**/ +#define GETPWUID_R_PROTO $getpwuid_r_proto /**/ + +/* HAS_GETSERVENT: + * This symbol, if defined, indicates that the getservent() routine is + * available to look up network services in some data base or another. + */ +#$d_getsent HAS_GETSERVENT /**/ + +/* HAS_GETSERV_PROTOS: + * This symbol, if defined, indicates that includes + * prototypes for getservent(), getservbyname(), and + * getservbyaddr(). Otherwise, it is up to the program to guess + * them. See netdbtype.U for probing for various Netdb_xxx_t types. + */ +#$d_getservprotos HAS_GETSERV_PROTOS /**/ + +/* HAS_GETSPNAM: + * This symbol, if defined, indicates that the getspnam system call is + * available to retrieve SysV shadow password entries by name. + */ +#$d_getspnam HAS_GETSPNAM /**/ + +/* HAS_GETSPNAM_R: + * This symbol, if defined, indicates that the getspnam_r routine + * is available to getspnam re-entrantly. + */ +/* GETSPNAM_R_PROTO: + * This symbol encodes the prototype of getspnam_r. + * It is zero if d_getspnam_r is undef, and one of the + * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getspnam_r + * is defined. + */ +#$d_getspnam_r HAS_GETSPNAM_R /**/ +#define GETSPNAM_R_PROTO $getspnam_r_proto /**/ + +/* HAS_GETSERVBYNAME: + * This symbol, if defined, indicates that the getservbyname() + * routine is available to look up services by their name. + */ +/* HAS_GETSERVBYPORT: + * This symbol, if defined, indicates that the getservbyport() + * routine is available to look up services by their port. + */ +#$d_getsbyname HAS_GETSERVBYNAME /**/ +#$d_getsbyport HAS_GETSERVBYPORT /**/ + +/* HAS_GMTIME_R: + * This symbol, if defined, indicates that the gmtime_r routine + * is available to gmtime re-entrantly. + */ +/* GMTIME_R_PROTO: + * This symbol encodes the prototype of gmtime_r. + * It is zero if d_gmtime_r is undef, and one of the + * REENTRANT_PROTO_T_ABC macros of reentr.h if d_gmtime_r + * is defined. + */ +#$d_gmtime_r HAS_GMTIME_R /**/ +#define GMTIME_R_PROTO $gmtime_r_proto /**/ + +/* HAS_GNULIBC: + * This symbol, if defined, indicates to the C program that + * the GNU C library is being used. A better check is to use + * the __GLIBC__ and __GLIBC_MINOR__ symbols supplied with glibc. + */ +#$d_gnulibc HAS_GNULIBC /**/ +#if defined(HAS_GNULIBC) && !defined(_GNU_SOURCE) +# define _GNU_SOURCE +#endif +/* HAS_HASMNTOPT: + * This symbol, if defined, indicates that the hasmntopt routine is + * available to query the mount options of file systems. + */ +#$d_hasmntopt HAS_HASMNTOPT /**/ + +/* HAS_HTONL: + * This symbol, if defined, indicates that the htonl() routine (and + * friends htons() ntohl() ntohs()) are available to do network + * order byte swapping. + */ +/* HAS_HTONS: + * This symbol, if defined, indicates that the htons() routine (and + * friends htonl() ntohl() ntohs()) are available to do network + * order byte swapping. + */ +/* HAS_NTOHL: + * This symbol, if defined, indicates that the ntohl() routine (and + * friends htonl() htons() ntohs()) are available to do network + * order byte swapping. + */ +/* HAS_NTOHS: + * This symbol, if defined, indicates that the ntohs() routine (and + * friends htonl() htons() ntohl()) are available to do network + * order byte swapping. + */ +#$d_htonl HAS_HTONL /**/ +#$d_htonl HAS_HTONS /**/ +#$d_htonl HAS_NTOHL /**/ +#$d_htonl HAS_NTOHS /**/ + +/* HAS_INT64_T: + * This symbol will defined if the C compiler supports int64_t. + * Usually the needs to be included, but sometimes + * is enough. + */ +#$d_int64_t HAS_INT64_T /**/ + +/* HAS_ISASCII: + * This manifest constant lets the C program know that isascii + * is available. + */ +#$d_isascii HAS_ISASCII /**/ + +/* HAS_ISFINITE: + * This symbol, if defined, indicates that the isfinite routine is + * available to check whether a double is finite (non-infinity non-NaN). + */ +#$d_isfinite HAS_ISFINITE /**/ + +/* HAS_ISINF: + * This symbol, if defined, indicates that the isinf routine is + * available to check whether a double is an infinity. + */ +#$d_isinf HAS_ISINF /**/ + +/* HAS_ISNAN: + * This symbol, if defined, indicates that the isnan routine is + * available to check whether a double is a NaN. + */ +#$d_isnan HAS_ISNAN /**/ + +/* HAS_ISNANL: + * This symbol, if defined, indicates that the isnanl routine is + * available to check whether a long double is a NaN. + */ +#$d_isnanl HAS_ISNANL /**/ + +/* HAS_LCHOWN: + * This symbol, if defined, indicates that the lchown routine is + * available to operate on a symbolic link (instead of following the + * link). + */ +#$d_lchown HAS_LCHOWN /**/ + +/* HAS_LDBL_DIG: + * This symbol, if defined, indicates that this system's + * or defines the symbol LDBL_DIG, which is the number + * of significant digits in a long double precision number. Unlike + * for DBL_DIG, there's no good guess for LDBL_DIG if it is undefined. + */ +#$d_ldbl_dig HAS_LDBL_DIG /* */ + +/* HAS_LOCALTIME_R: + * This symbol, if defined, indicates that the localtime_r routine + * is available to localtime re-entrantly. + */ +/* LOCALTIME_R_PROTO: + * This symbol encodes the prototype of localtime_r. + * It is zero if d_localtime_r is undef, and one of the + * REENTRANT_PROTO_T_ABC macros of reentr.h if d_localtime_r + * is defined. + */ +#$d_localtime_r HAS_LOCALTIME_R /**/ +#define LOCALTIME_R_PROTO $localtime_r_proto /**/ + +/* HAS_LONG_DOUBLE: + * This symbol will be defined if the C compiler supports long + * doubles. + */ +/* LONG_DOUBLESIZE: + * This symbol contains the size of a long double, so that the + * C preprocessor can make decisions based on it. It is only + * defined if the system supports long doubles. + */ +#$d_longdbl HAS_LONG_DOUBLE /**/ +#ifdef HAS_LONG_DOUBLE +#define LONG_DOUBLESIZE $longdblsize /**/ +#endif + +/* HAS_LONG_LONG: + * This symbol will be defined if the C compiler supports long long. + */ +/* LONGLONGSIZE: + * This symbol contains the size of a long long, so that the + * C preprocessor can make decisions based on it. It is only + * defined if the system supports long long. + */ +#$d_longlong HAS_LONG_LONG /**/ +#ifdef HAS_LONG_LONG +#define LONGLONGSIZE $longlongsize /**/ +#endif + +/* HAS_LSEEK_PROTO: + * This symbol, if defined, indicates that the system provides + * a prototype for the lseek() function. Otherwise, it is up + * to the program to supply one. A good guess is + * extern off_t lseek(int, off_t, int); + */ +#$d_lseekproto HAS_LSEEK_PROTO /**/ + +/* HAS_MADVISE: + * This symbol, if defined, indicates that the madvise system call is + * available to map a file into memory. + */ +#$d_madvise HAS_MADVISE /**/ + +/* HAS_MALLOC_SIZE: + * This symbol, if defined, indicates that the malloc_size + * routine is available for use. + */ +#$d_malloc_size HAS_MALLOC_SIZE /**/ + +/* HAS_MALLOC_GOOD_SIZE: + * This symbol, if defined, indicates that the malloc_good_size + * routine is available for use. + */ +#$d_malloc_good_size HAS_MALLOC_GOOD_SIZE /**/ + +/* HAS_MEMCHR: + * This symbol, if defined, indicates that the memchr routine is available + * to locate characters within a C string. + */ +#$d_memchr HAS_MEMCHR /**/ + +/* HAS_MKDTEMP: + * This symbol, if defined, indicates that the mkdtemp routine is + * available to exclusively create a uniquely named temporary directory. + */ +#$d_mkdtemp HAS_MKDTEMP /**/ + +/* HAS_MKSTEMP: + * This symbol, if defined, indicates that the mkstemp routine is + * available to exclusively create and open a uniquely named + * temporary file. + */ +#$d_mkstemp HAS_MKSTEMP /**/ + +/* HAS_MKSTEMPS: + * This symbol, if defined, indicates that the mkstemps routine is + * available to excluslvely create and open a uniquely named + * (with a suffix) temporary file. + */ +#$d_mkstemps HAS_MKSTEMPS /**/ + +/* HAS_MMAP: + * This symbol, if defined, indicates that the mmap system call is + * available to map a file into memory. + */ +/* Mmap_t: + * This symbol holds the return type of the mmap() system call + * (and simultaneously the type of the first argument). + * Usually set to 'void *' or 'cadd_t'. + */ +#$d_mmap HAS_MMAP /**/ +#define Mmap_t $mmaptype /**/ + +/* HAS_MODFL: + * This symbol, if defined, indicates that the modfl routine is + * available to split a long double x into a fractional part f and + * an integer part i such that |f| < 1.0 and (f + i) = x. + */ +/* HAS_MODFL_PROTO: + * This symbol, if defined, indicates that the system provides + * a prototype for the modfl() function. Otherwise, it is up + * to the program to supply one. + */ +/* HAS_MODFL_POW32_BUG: + * This symbol, if defined, indicates that the modfl routine is + * broken for long doubles >= pow(2, 32). + * For example from 4294967303.150000 one would get 4294967302.000000 + * and 1.150000. The bug has been seen in certain versions of glibc, + * release 2.2.2 is known to be okay. + */ +#$d_modfl HAS_MODFL /**/ +#$d_modflproto HAS_MODFL_PROTO /**/ +#$d_modfl_pow32_bug HAS_MODFL_POW32_BUG /**/ + +/* HAS_MPROTECT: + * This symbol, if defined, indicates that the mprotect system call is + * available to modify the access protection of a memory mapped file. + */ +#$d_mprotect HAS_MPROTECT /**/ + +/* HAS_MSG: + * This symbol, if defined, indicates that the entire msg*(2) library is + * supported (IPC mechanism based on message queues). + */ +#$d_msg HAS_MSG /**/ + +/* HAS_STRUCT_MSGHDR: + * This symbol, if defined, indicates that the struct msghdr + * is supported. + */ +#$d_msghdr_s HAS_STRUCT_MSGHDR /**/ + +/* HAS_OFF64_T: + * This symbol will be defined if the C compiler supports off64_t. + */ +#$d_off64_t HAS_OFF64_T /**/ + +/* HAS_OPEN3: + * This manifest constant lets the C program know that the three + * argument form of open(2) is available. + */ +#$d_open3 HAS_OPEN3 /**/ + +/* OLD_PTHREAD_CREATE_JOINABLE: + * This symbol, if defined, indicates how to create pthread + * in joinable (aka undetached) state. NOTE: not defined + * if pthread.h already has defined PTHREAD_CREATE_JOINABLE + * (the new version of the constant). + * If defined, known values are PTHREAD_CREATE_UNDETACHED + * and __UNDETACHED. + */ +#$d_old_pthread_create_joinable OLD_PTHREAD_CREATE_JOINABLE $old_pthread_create_joinable /**/ + +/* HAS_PTHREAD_YIELD: + * This symbol, if defined, indicates that the pthread_yield + * routine is available to yield the execution of the current + * thread. sched_yield is preferable to pthread_yield. + */ +/* SCHED_YIELD: + * This symbol defines the way to yield the execution of + * the current thread. Known ways are sched_yield, + * pthread_yield, and pthread_yield with NULL. + */ +/* HAS_SCHED_YIELD: + * This symbol, if defined, indicates that the sched_yield + * routine is available to yield the execution of the current + * thread. sched_yield is preferable to pthread_yield. + */ +#$d_pthread_yield HAS_PTHREAD_YIELD /**/ +#define SCHED_YIELD $sched_yield /**/ +#$d_sched_yield HAS_SCHED_YIELD /**/ + +/* HAS_RANDOM_R: + * This symbol, if defined, indicates that the random_r routine + * is available to random re-entrantly. + */ +/* RANDOM_R_PROTO: + * This symbol encodes the prototype of random_r. + * It is zero if d_random_r is undef, and one of the + * REENTRANT_PROTO_T_ABC macros of reentr.h if d_random_r + * is defined. + */ +#$d_random_r HAS_RANDOM_R /**/ +#define RANDOM_R_PROTO $random_r_proto /**/ + +/* HAS_READDIR_R: + * This symbol, if defined, indicates that the readdir_r routine + * is available to readdir re-entrantly. + */ +/* READDIR_R_PROTO: + * This symbol encodes the prototype of readdir_r. + * It is zero if d_readdir_r is undef, and one of the + * REENTRANT_PROTO_T_ABC macros of reentr.h if d_readdir_r + * is defined. + */ +#$d_readdir_r HAS_READDIR_R /**/ +#define READDIR_R_PROTO $readdir_r_proto /**/ + +/* HAS_READV: + * This symbol, if defined, indicates that the readv routine is + * available to do gather reads. You will also need + * and there I_SYSUIO. + */ +#$d_readv HAS_READV /**/ + +/* HAS_RECVMSG: + * This symbol, if defined, indicates that the recvmsg routine is + * available to send structured socket messages. + */ +#$d_recvmsg HAS_RECVMSG /**/ + +/* HAS_SAFE_BCOPY: + * This symbol, if defined, indicates that the bcopy routine is available + * to copy potentially overlapping memory blocks. Normally, you should + * probably use memmove() or memcpy(). If neither is defined, roll your + * own version. + */ +#$d_safebcpy HAS_SAFE_BCOPY /**/ + +/* HAS_SAFE_MEMCPY: + * This symbol, if defined, indicates that the memcpy routine is available + * to copy potentially overlapping memory blocks. If you need to + * copy overlapping memory blocks, you should check HAS_MEMMOVE and + * use memmove() instead, if available. + */ +#$d_safemcpy HAS_SAFE_MEMCPY /**/ + +/* HAS_SANE_MEMCMP: + * This symbol, if defined, indicates that the memcmp routine is available + * and can be used to compare relative magnitudes of chars with their high + * bits set. If it is not defined, roll your own version. + */ +#$d_sanemcmp HAS_SANE_MEMCMP /**/ + +/* HAS_SBRK_PROTO: + * This symbol, if defined, indicates that the system provides + * a prototype for the sbrk() function. Otherwise, it is up + * to the program to supply one. Good guesses are + * extern void* sbrk(int); + * extern void* sbrk(size_t); + */ +#$d_sbrkproto HAS_SBRK_PROTO /**/ + +/* HAS_SEM: + * This symbol, if defined, indicates that the entire sem*(2) library is + * supported. + */ +#$d_sem HAS_SEM /**/ + +/* HAS_SENDMSG: + * This symbol, if defined, indicates that the sendmsg routine is + * available to send structured socket messages. + */ +#$d_sendmsg HAS_SENDMSG /**/ + +/* HAS_SETGRENT: + * This symbol, if defined, indicates that the setgrent routine is + * available for initializing sequential access of the group database. + */ +#$d_setgrent HAS_SETGRENT /**/ + +/* HAS_SETGRENT_R: + * This symbol, if defined, indicates that the setgrent_r routine + * is available to setgrent re-entrantly. + */ +/* SETGRENT_R_PROTO: + * This symbol encodes the prototype of setgrent_r. + * It is zero if d_setgrent_r is undef, and one of the + * REENTRANT_PROTO_T_ABC macros of reentr.h if d_setgrent_r + * is defined. + */ +#$d_setgrent_r HAS_SETGRENT_R /**/ +#define SETGRENT_R_PROTO $setgrent_r_proto /**/ + +/* HAS_SETGROUPS: + * This symbol, if defined, indicates that the setgroups() routine is + * available to set the list of process groups. If unavailable, multiple + * groups are probably not supported. + */ +#$d_setgrps HAS_SETGROUPS /**/ + +/* HAS_SETHOSTENT: + * This symbol, if defined, indicates that the sethostent() routine is + * available. + */ +#$d_sethent HAS_SETHOSTENT /**/ + +/* HAS_SETITIMER: + * This symbol, if defined, indicates that the setitimer routine is + * available to set interval timers. + */ +#$d_setitimer HAS_SETITIMER /**/ + +/* HAS_SETNETENT: + * This symbol, if defined, indicates that the setnetent() routine is + * available. + */ +#$d_setnent HAS_SETNETENT /**/ + +/* HAS_SETPROTOENT: + * This symbol, if defined, indicates that the setprotoent() routine is + * available. + */ +#$d_setpent HAS_SETPROTOENT /**/ + +/* HAS_SETPGRP: + * This symbol, if defined, indicates that the setpgrp routine is + * available to set the current process group. + */ +/* USE_BSD_SETPGRP: + * This symbol, if defined, indicates that setpgrp needs two + * arguments whereas USG one needs none. See also HAS_SETPGID + * for a POSIX interface. + */ +#$d_setpgrp HAS_SETPGRP /**/ +#$d_bsdsetpgrp USE_BSD_SETPGRP /**/ + +/* HAS_SETPROCTITLE: + * This symbol, if defined, indicates that the setproctitle routine is + * available to set process title. + */ +#$d_setproctitle HAS_SETPROCTITLE /**/ + +/* HAS_SETPWENT: + * This symbol, if defined, indicates that the setpwent routine is + * available for initializing sequential access of the passwd database. + */ +#$d_setpwent HAS_SETPWENT /**/ + +/* HAS_SETPWENT_R: + * This symbol, if defined, indicates that the setpwent_r routine + * is available to setpwent re-entrantly. + */ +/* SETPWENT_R_PROTO: + * This symbol encodes the prototype of setpwent_r. + * It is zero if d_setpwent_r is undef, and one of the + * REENTRANT_PROTO_T_ABC macros of reentr.h if d_setpwent_r + * is defined. + */ +#$d_setpwent_r HAS_SETPWENT_R /**/ +#define SETPWENT_R_PROTO $setpwent_r_proto /**/ + +/* HAS_SETSERVENT: + * This symbol, if defined, indicates that the setservent() routine is + * available. + */ +#$d_setsent HAS_SETSERVENT /**/ + +/* HAS_SETVBUF: + * This symbol, if defined, indicates that the setvbuf routine is + * available to change buffering on an open stdio stream. + * to a line-buffered mode. + */ +#$d_setvbuf HAS_SETVBUF /**/ + +/* USE_SFIO: + * This symbol, if defined, indicates that sfio should + * be used. + */ +#$d_sfio USE_SFIO /**/ + +/* HAS_SHM: + * This symbol, if defined, indicates that the entire shm*(2) library is + * supported. + */ +#$d_shm HAS_SHM /**/ + +/* HAS_SIGACTION: + * This symbol, if defined, indicates that Vr4's sigaction() routine + * is available. + */ +#$d_sigaction HAS_SIGACTION /**/ + +/* HAS_SIGSETJMP: + * This variable indicates to the C program that the sigsetjmp() + * routine is available to save the calling process's registers + * and stack environment for later use by siglongjmp(), and + * to optionally save the process's signal mask. See + * Sigjmp_buf, Sigsetjmp, and Siglongjmp. + */ +/* Sigjmp_buf: + * This is the buffer type to be used with Sigsetjmp and Siglongjmp. + */ +/* Sigsetjmp: + * This macro is used in the same way as sigsetjmp(), but will invoke + * traditional setjmp() if sigsetjmp isn't available. + * See HAS_SIGSETJMP. + */ +/* Siglongjmp: + * This macro is used in the same way as siglongjmp(), but will invoke + * traditional longjmp() if siglongjmp isn't available. + * See HAS_SIGSETJMP. + */ +#$d_sigsetjmp HAS_SIGSETJMP /**/ +#ifdef HAS_SIGSETJMP +#define Sigjmp_buf sigjmp_buf +#define Sigsetjmp(buf,save_mask) sigsetjmp((buf),(save_mask)) +#define Siglongjmp(buf,retval) siglongjmp((buf),(retval)) +#else +#define Sigjmp_buf jmp_buf +#define Sigsetjmp(buf,save_mask) setjmp((buf)) +#define Siglongjmp(buf,retval) longjmp((buf),(retval)) +#endif + +/* USE_SITECUSTOMIZE: + * This symbol, if defined, indicates that sitecustomize should + * be used. + */ +#$usesitecustomize USE_SITECUSTOMIZE /**/ + +/* HAS_SNPRINTF: + * This symbol, if defined, indicates that the snprintf () library + * function is available for use. + */ +/* HAS_VSNPRINTF: + * This symbol, if defined, indicates that the vsnprintf () library + * function is available for use. + */ +#$d_snprintf HAS_SNPRINTF /**/ +#$d_vsnprintf HAS_VSNPRINTF /**/ + +/* HAS_SOCKET: + * This symbol, if defined, indicates that the BSD socket interface is + * supported. + */ +/* HAS_SOCKETPAIR: + * This symbol, if defined, indicates that the BSD socketpair() call is + * supported. + */ +/* HAS_MSG_CTRUNC: + * This symbol, if defined, indicates that the MSG_CTRUNC is supported. + * Checking just with #ifdef might not be enough because this symbol + * has been known to be an enum. + */ +/* HAS_MSG_DONTROUTE: + * This symbol, if defined, indicates that the MSG_DONTROUTE is supported. + * Checking just with #ifdef might not be enough because this symbol + * has been known to be an enum. + */ +/* HAS_MSG_OOB: + * This symbol, if defined, indicates that the MSG_OOB is supported. + * Checking just with #ifdef might not be enough because this symbol + * has been known to be an enum. + */ +/* HAS_MSG_PEEK: + * This symbol, if defined, indicates that the MSG_PEEK is supported. + * Checking just with #ifdef might not be enough because this symbol + * has been known to be an enum. + */ +/* HAS_MSG_PROXY: + * This symbol, if defined, indicates that the MSG_PROXY is supported. + * Checking just with #ifdef might not be enough because this symbol + * has been known to be an enum. + */ +/* HAS_SCM_RIGHTS: + * This symbol, if defined, indicates that the SCM_RIGHTS is supported. + * Checking just with #ifdef might not be enough because this symbol + * has been known to be an enum. + */ +#$d_socket HAS_SOCKET /**/ +#$d_sockpair HAS_SOCKETPAIR /**/ +#$d_msg_ctrunc HAS_MSG_CTRUNC /**/ +#$d_msg_dontroute HAS_MSG_DONTROUTE /**/ +#$d_msg_oob HAS_MSG_OOB /**/ +#$d_msg_peek HAS_MSG_PEEK /**/ +#$d_msg_proxy HAS_MSG_PROXY /**/ +#$d_scm_rights HAS_SCM_RIGHTS /**/ -/* HAS_OPEN3: - * This manifest constant lets the C program know that the three - * argument form of open(2) is available. +/* HAS_SOCKS5_INIT: + * This symbol, if defined, indicates that the socks5_init routine is + * available to initialize SOCKS 5. */ -#$d_open3 HAS_OPEN3 /**/ +#$d_socks5_init HAS_SOCKS5_INIT /**/ -/* HAS_SAFE_BCOPY: - * This symbol, if defined, indicates that the bcopy routine is available - * to copy potentially overlapping memory blocks. Otherwise you should - * probably use memmove() or memcpy(). If neither is defined, roll your - * own version. +/* HAS_SQRTL: + * This symbol, if defined, indicates that the sqrtl routine is + * available to do long double square roots. */ -#$d_safebcpy HAS_SAFE_BCOPY /**/ +#$d_sqrtl HAS_SQRTL /**/ -/* HAS_SAFE_MEMCPY: - * This symbol, if defined, indicates that the memcpy routine is available - * to copy potentially overlapping memory blocks. Otherwise you should - * probably use memmove() or memcpy(). If neither is defined, roll your - * own version. +/* HAS_SRAND48_R: + * This symbol, if defined, indicates that the srand48_r routine + * is available to srand48 re-entrantly. */ -#$d_safemcpy HAS_SAFE_MEMCPY /**/ - -/* HAS_SANE_MEMCMP: - * This symbol, if defined, indicates that the memcmp routine is available - * and can be used to compare relative magnitudes of chars with their high - * bits set. If it is not defined, roll your own version. +/* SRAND48_R_PROTO: + * This symbol encodes the prototype of srand48_r. + * It is zero if d_srand48_r is undef, and one of the + * REENTRANT_PROTO_T_ABC macros of reentr.h if d_srand48_r + * is defined. */ -#$d_sanemcmp HAS_SANE_MEMCMP /**/ +#$d_srand48_r HAS_SRAND48_R /**/ +#define SRAND48_R_PROTO $srand48_r_proto /**/ -/* HAS_SIGACTION: - * This symbol, if defined, indicates that Vr4's sigaction() routine - * is available. +/* HAS_SRANDOM_R: + * This symbol, if defined, indicates that the srandom_r routine + * is available to srandom re-entrantly. */ -#$d_sigaction HAS_SIGACTION /**/ +/* SRANDOM_R_PROTO: + * This symbol encodes the prototype of srandom_r. + * It is zero if d_srandom_r is undef, and one of the + * REENTRANT_PROTO_T_ABC macros of reentr.h if d_srandom_r + * is defined. + */ +#$d_srandom_r HAS_SRANDOM_R /**/ +#define SRANDOM_R_PROTO $srandom_r_proto /**/ -/* HAS_SIGSETJMP: - * This variable indicates to the C program that the sigsetjmp() - * routine is available to save the calling process's registers - * and stack environment for later use by siglongjmp(), and - * to optionally save the process's signal mask. See - * Sigjmp_buf, Sigsetjmp, and Siglongjmp. +/* USE_STAT_BLOCKS: + * This symbol is defined if this system has a stat structure declaring + * st_blksize and st_blocks. */ -/* Sigjmp_buf: - * This is the buffer type to be used with Sigsetjmp and Siglongjmp. +#ifndef USE_STAT_BLOCKS +#$d_statblks USE_STAT_BLOCKS /**/ +#endif + +/* HAS_STRUCT_STATFS_F_FLAGS: + * This symbol, if defined, indicates that the struct statfs + * does have the f_flags member containing the mount flags of + * the filesystem containing the file. + * This kind of struct statfs is coming from (BSD 4.3), + * not from (SYSV). Older BSDs (like Ultrix) do not + * have statfs() and struct statfs, they have ustat() and getmnt() + * with struct ustat and struct fs_data. */ -/* Sigsetjmp: - * This macro is used in the same way as sigsetjmp(), but will invoke - * traditional setjmp() if sigsetjmp isn't available. - * See HAS_SIGSETJMP. +#$d_statfs_f_flags HAS_STRUCT_STATFS_F_FLAGS /**/ + +/* HAS_STRUCT_STATFS: + * This symbol, if defined, indicates that the struct statfs + * to do statfs() is supported. */ -/* Siglongjmp: - * This macro is used in the same way as siglongjmp(), but will invoke - * traditional longjmp() if siglongjmp isn't available. - * See HAS_SIGSETJMP. +#$d_statfs_s HAS_STRUCT_STATFS /**/ + +/* HAS_FSTATVFS: + * This symbol, if defined, indicates that the fstatvfs routine is + * available to stat filesystems by file descriptors. */ -#$d_sigsetjmp HAS_SIGSETJMP /**/ -#ifdef HAS_SIGSETJMP -#define Sigjmp_buf sigjmp_buf -#define Sigsetjmp(buf,save_mask) sigsetjmp((buf),(save_mask)) -#define Siglongjmp(buf,retval) siglongjmp((buf),(retval)) -#else -#define Sigjmp_buf jmp_buf -#define Sigsetjmp(buf,save_mask) setjmp((buf)) -#define Siglongjmp(buf,retval) longjmp((buf),(retval)) -#endif +#$d_fstatvfs HAS_FSTATVFS /**/ /* USE_STDIO_PTR: * This symbol is defined if the _ptr and _cnt fields (or similar) @@ -1278,12 +2473,23 @@ sed <config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un- * This symbol is defined if the FILE_cnt macro can be used as an * lvalue. */ +/* STDIO_PTR_LVAL_SETS_CNT: + * This symbol is defined if using the FILE_ptr macro as an lvalue + * to increase the pointer by n has the side effect of decreasing the + * value of File_cnt(fp) by n. + */ +/* STDIO_PTR_LVAL_NOCHANGE_CNT: + * This symbol is defined if using the FILE_ptr macro as an lvalue + * to increase the pointer by n leaves File_cnt(fp) unchanged. + */ #$d_stdstdio USE_STDIO_PTR /**/ #ifdef USE_STDIO_PTR #define FILE_ptr(fp) $stdio_ptr #$d_stdio_ptr_lval STDIO_PTR_LVALUE /**/ #define FILE_cnt(fp) $stdio_cnt #$d_stdio_cnt_lval STDIO_CNT_LVALUE /**/ +#$d_stdio_ptr_lval_sets_cnt STDIO_PTR_LVAL_SETS_CNT /**/ +#$d_stdio_ptr_lval_nochange_cnt STDIO_PTR_LVAL_NOCHANGE_CNT /**/ #endif /* USE_STDIO_BASE: @@ -1312,111 +2518,204 @@ sed <config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un- #define FILE_bufsiz(fp) $stdio_bufsiz #endif -/* HAS_VPRINTF: - * This symbol, if defined, indicates that the vprintf routine is available - * to printf with a pointer to an argument list. If unavailable, you - * may need to write your own, probably in terms of _doprnt(). +/* HAS_STRERROR: + * This symbol, if defined, indicates that the strerror routine is + * available to translate error numbers to strings. See the writeup + * of Strerror() in this file before you try to define your own. */ -/* USE_CHAR_VSPRINTF: - * This symbol is defined if this system has vsprintf() returning type - * (char*). The trend seems to be to declare it as "int vsprintf()". It - * is up to the package author to declare vsprintf correctly based on the - * symbol. +/* HAS_SYS_ERRLIST: + * This symbol, if defined, indicates that the sys_errlist array is + * available to translate error numbers to strings. The extern int + * sys_nerr gives the size of that table. */ -#$d_vprintf HAS_VPRINTF /**/ -#$d_charvspr USE_CHAR_VSPRINTF /**/ +/* Strerror: + * This preprocessor symbol is defined as a macro if strerror() is + * not available to translate error numbers to strings but sys_errlist[] + * array is there. + */ +#$d_strerror HAS_STRERROR /**/ +#$d_syserrlst HAS_SYS_ERRLIST /**/ +#define Strerror(e) $d_strerrm -/* DOUBLESIZE: - * This symbol contains the size of a double, so that the C preprocessor - * can make decisions based on it. +/* HAS_STRERROR_R: + * This symbol, if defined, indicates that the strerror_r routine + * is available to strerror re-entrantly. */ -#define DOUBLESIZE $doublesize /**/ +/* STRERROR_R_PROTO: + * This symbol encodes the prototype of strerror_r. + * It is zero if d_strerror_r is undef, and one of the + * REENTRANT_PROTO_T_ABC macros of reentr.h if d_strerror_r + * is defined. + */ +#$d_strerror_r HAS_STRERROR_R /**/ +#define STRERROR_R_PROTO $strerror_r_proto /**/ -/* I_TIME: - * This symbol, if defined, indicates to the C program that it should - * include . +/* HAS_STRTOLD: + * This symbol, if defined, indicates that the strtold routine is + * available to convert strings to long doubles. */ -/* I_SYS_TIME: - * This symbol, if defined, indicates to the C program that it should - * include . +#$d_strtold HAS_STRTOLD /**/ + +/* HAS_STRTOLL: + * This symbol, if defined, indicates that the strtoll routine is + * available to convert strings to long longs. */ -/* I_SYS_TIME_KERNEL: - * This symbol, if defined, indicates to the C program that it should - * include with KERNEL defined. +#$d_strtoll HAS_STRTOLL /**/ + +/* HAS_STRTOQ: + * This symbol, if defined, indicates that the strtoq routine is + * available to convert strings to long longs (quads). */ -#$i_time I_TIME /**/ -#$i_systime I_SYS_TIME /**/ -#$i_systimek I_SYS_TIME_KERNEL /**/ +#$d_strtoq HAS_STRTOQ /**/ -/* VAL_O_NONBLOCK: - * This symbol is to be used during open() or fcntl(F_SETFL) to turn on - * non-blocking I/O for the file descriptor. Note that there is no way - * back, i.e. you cannot turn it blocking again this way. If you wish to - * alternatively switch between blocking and non-blocking, use the - * ioctl(FIOSNBIO) call instead, but that is not supported by all devices. +/* HAS_STRTOUL: + * This symbol, if defined, indicates that the strtoul routine is + * available to provide conversion of strings to unsigned long. */ -/* VAL_EAGAIN: - * This symbol holds the errno error code set by read() when no data was - * present on the non-blocking file descriptor. +#$d_strtoul HAS_STRTOUL /**/ + +/* HAS_STRTOULL: + * This symbol, if defined, indicates that the strtoull routine is + * available to convert strings to unsigned long longs. */ -/* RD_NODATA: - * This symbol holds the return code from read() when no data is present - * on the non-blocking file descriptor. Be careful! If EOF_NONBLOCK is - * not defined, then you can't distinguish between no data and EOF by - * issuing a read(). You'll have to find another way to tell for sure! +#$d_strtoull HAS_STRTOULL /**/ + +/* HAS_STRTOUQ: + * This symbol, if defined, indicates that the strtouq routine is + * available to convert strings to unsigned long longs (quads). */ -/* EOF_NONBLOCK: - * This symbol, if defined, indicates to the C program that a read() on - * a non-blocking file descriptor will return 0 on EOF, and not the value - * held in RD_NODATA (-1 usually, in that case!). +#$d_strtouq HAS_STRTOUQ /**/ + +/* HAS_TELLDIR_PROTO: + * This symbol, if defined, indicates that the system provides + * a prototype for the telldir() function. Otherwise, it is up + * to the program to supply one. A good guess is + * extern long telldir(DIR*); */ -#define VAL_O_NONBLOCK $o_nonblock -#define VAL_EAGAIN $eagain -#define RD_NODATA $rd_nodata -#$d_eofnblk EOF_NONBLOCK +#$d_telldirproto HAS_TELLDIR_PROTO /**/ -/* PTRSIZE: - * This symbol contains the size of a pointer, so that the C preprocessor - * can make decisions based on it. It will be sizeof(void *) if - * the compiler supports (void *); otherwise it will be - * sizeof(char *). +/* HAS_TIME: + * This symbol, if defined, indicates that the time() routine exists. */ -#define PTRSIZE $ptrsize /**/ +/* Time_t: + * This symbol holds the type returned by time(). It can be long, + * or time_t on BSD sites (in which case should be + * included). + */ +#$d_time HAS_TIME /**/ +#define Time_t $timetype /* Time type */ -/* Drand01: - * This macro is to be used to generate uniformly distributed - * random numbers over the range [0., 1.[. You may have to supply - * an 'extern double drand48();' in your program since SunOS 4.1.3 - * doesn't provide you with anything relevant in it's headers. - * See HAS_DRAND48_PROTO. +/* HAS_TIMES: + * This symbol, if defined, indicates that the times() routine exists. + * Note that this became obsolete on some systems (SUNOS), which now + * use getrusage(). It may be necessary to include . */ -/* Rand_seed_t: - * This symbol defines the type of the argument of the - * random seed function. +#$d_times HAS_TIMES /**/ + +/* HAS_TMPNAM_R: + * This symbol, if defined, indicates that the tmpnam_r routine + * is available to tmpnam re-entrantly. */ -/* seedDrand01: - * This symbol defines the macro to be used in seeding the - * random number generator (see Drand01). +/* TMPNAM_R_PROTO: + * This symbol encodes the prototype of tmpnam_r. + * It is zero if d_tmpnam_r is undef, and one of the + * REENTRANT_PROTO_T_ABC macros of reentr.h if d_tmpnam_r + * is defined. + */ +#$d_tmpnam_r HAS_TMPNAM_R /**/ +#define TMPNAM_R_PROTO $tmpnam_r_proto /**/ + +/* HAS_UALARM: + * This symbol, if defined, indicates that the ualarm routine is + * available to do alarms with microsecond granularity. + */ +#$d_ualarm HAS_UALARM /**/ + +/* HAS_UNION_SEMUN: + * This symbol, if defined, indicates that the union semun is + * defined by including . If not, the user code + * probably needs to define it as: + * union semun { + * int val; + * struct semid_ds *buf; + * unsigned short *array; + * } + */ +/* USE_SEMCTL_SEMUN: + * This symbol, if defined, indicates that union semun is + * used for semctl IPC_STAT. + */ +/* USE_SEMCTL_SEMID_DS: + * This symbol, if defined, indicates that struct semid_ds * is + * used for semctl IPC_STAT. + */ +#$d_union_semun HAS_UNION_SEMUN /**/ +#$d_semctl_semun USE_SEMCTL_SEMUN /**/ +#$d_semctl_semid_ds USE_SEMCTL_SEMID_DS /**/ + +/* HAS_UNORDERED: + * This symbol, if defined, indicates that the unordered routine is + * available to check whether two doubles are unordered + * (effectively: whether either of them is NaN) + */ +#$d_unordered HAS_UNORDERED /**/ + +/* HAS_UNSETENV: + * This symbol, if defined, indicates that the unsetenv () routine is + * available for use. + */ +#$d_unsetenv HAS_UNSETENV /**/ + +/* HAS_USTAT: + * This symbol, if defined, indicates that the ustat system call is + * available to query file system statistics by dev_t. + */ +#$d_ustat HAS_USTAT /**/ + +/* HAS_VFORK: + * This symbol, if defined, indicates that vfork() exists. + */ +#$d_vfork HAS_VFORK /**/ + +/* Signal_t: + * This symbol's value is either "void" or "int", corresponding to the + * appropriate return type of a signal handler. Thus, you can declare + * a signal handler using "Signal_t (*handler)()", and define the + * handler using "Signal_t handler(sig)". + */ +#define Signal_t $signal_t /* Signal handler's return type */ + +/* HAS_VPRINTF: + * This symbol, if defined, indicates that the vprintf routine is available + * to printf with a pointer to an argument list. If unavailable, you + * may need to write your own, probably in terms of _doprnt(). + */ +/* USE_CHAR_VSPRINTF: + * This symbol is defined if this system has vsprintf() returning type + * (char*). The trend seems to be to declare it as "int vsprintf()". It + * is up to the package author to declare vsprintf correctly based on the + * symbol. + */ +#$d_vprintf HAS_VPRINTF /**/ +#$d_charvspr USE_CHAR_VSPRINTF /**/ + +/* HAS_WRITEV: + * This symbol, if defined, indicates that the writev routine is + * available to do scatter writes. */ -/* RANDBITS: - * This symbol indicates how many bits are produced by the - * function used to generate normalized random numbers. - * Values include 15, 16, 31, and 48. +#$d_writev HAS_WRITEV /**/ + +/* USE_DYNAMIC_LOADING: + * This symbol, if defined, indicates that dynamic loading of + * some sort is available. */ -#define Drand01() $drand01 /**/ -#define Rand_seed_t $randseedtype /**/ -#define seedDrand01(x) $seedfunc((Rand_seed_t)x) /**/ -#define RANDBITS $randbits /**/ +#$usedl USE_DYNAMIC_LOADING /**/ -/* SSize_t: - * This symbol holds the type used by functions that return - * a count of bytes or an error condition. It must be a signed type. - * It is usually ssize_t, but may be long or int, etc. - * It may be necessary to include or - * to get any typedef'ed information. - * We will pick a type such that sizeof(SSize_t) == sizeof(Size_t). +/* DOUBLESIZE: + * This symbol contains the size of a double, so that the C preprocessor + * can make decisions based on it. */ -#define SSize_t $ssizetype /* signed count of bytes */ +#define DOUBLESIZE $doublesize /**/ /* EBCDIC: * This symbol, if defined, indicates that this system uses @@ -1424,683 +2723,710 @@ sed <config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un- */ #$ebcdic EBCDIC /**/ -/* ARCHLIB: - * This variable, if defined, holds the name of the directory in - * which the user wants to put architecture-dependent public - * library files for $package. It is most often a local directory - * such as /usr/local/lib. Programs using this variable must be - * prepared to deal with filename expansion. If ARCHLIB is the - * same as PRIVLIB, it is not defined, since presumably the - * program already searches PRIVLIB. +/* FFLUSH_NULL: + * This symbol, if defined, tells that fflush(NULL) does flush + * all pending stdio output. */ -/* ARCHLIB_EXP: - * This symbol contains the ~name expanded version of ARCHLIB, to be used - * in programs that are not prepared to deal with ~ expansion at run-time. +/* FFLUSH_ALL: + * This symbol, if defined, tells that to flush + * all pending stdio output one must loop through all + * the stdio file handles stored in an array and fflush them. + * Note that if fflushNULL is defined, fflushall will not + * even be probed for and will be left undefined. */ -#$d_archlib ARCHLIB "$archlib" /**/ -#$d_archlib ARCHLIB_EXP "$archlibexp" /**/ +#$fflushNULL FFLUSH_NULL /**/ +#$fflushall FFLUSH_ALL /**/ -/* BIN: - * This symbol holds the path of the bin directory where the package will - * be installed. Program must be prepared to deal with ~name substitution. +/* Fpos_t: + * This symbol holds the type used to declare file positions in libc. + * It can be fpos_t, long, uint, etc... It may be necessary to include + * to get any typedef'ed information. */ -/* BIN_EXP: - * This symbol is the filename expanded version of the BIN symbol, for - * programs that do not want to deal with that at run-time. +#define Fpos_t $fpostype /* File position type */ + +/* Gid_t_f: + * This symbol defines the format string used for printing a Gid_t. */ -#define BIN "$bin" /**/ -#define BIN_EXP "$binexp" /**/ +#define Gid_t_f $gidformat /**/ -/* INSTALL_USR_BIN_PERL: - * This symbol, if defined, indicates that Perl is to be installed - * also as /usr/bin/perl. +/* Gid_t_sign: + * This symbol holds the signedess of a Gid_t. + * 1 for unsigned, -1 for signed. */ -#$installusrbinperl INSTALL_USR_BIN_PERL /**/ +#define Gid_t_sign $gidsign /* GID sign */ -/* PRIVLIB: - * This symbol contains the name of the private library for this package. - * The library is private in the sense that it needn't be in anyone's - * execution path, but it should be accessible by the world. The program - * should be prepared to do ~ expansion. +/* Gid_t_size: + * This symbol holds the size of a Gid_t in bytes. */ -/* PRIVLIB_EXP: - * This symbol contains the ~name expanded version of PRIVLIB, to be used - * in programs that are not prepared to deal with ~ expansion at run-time. +#define Gid_t_size $gidsize /* GID size */ + +/* Gid_t: + * This symbol holds the return type of getgid() and the type of + * argument to setrgid() and related functions. Typically, + * it is the type of group ids in the kernel. It can be int, ushort, + * gid_t, etc... It may be necessary to include to get + * any typedef'ed information. */ -#define PRIVLIB "$privlib" /**/ -#define PRIVLIB_EXP "$privlibexp" /**/ +#define Gid_t $gidtype /* Type for getgid(), etc... */ -/* SITEARCH: - * This symbol contains the name of the private library for this package. - * The library is private in the sense that it needn't be in anyone's - * execution path, but it should be accessible by the world. The program - * should be prepared to do ~ expansion. - * The standard distribution will put nothing in this directory. - * Individual sites may place their own extensions and modules in - * this directory. +/* Groups_t: + * This symbol holds the type used for the second argument to + * getgroups() and setgroups(). Usually, this is the same as + * gidtype (gid_t) , but sometimes it isn't. + * It can be int, ushort, gid_t, etc... + * It may be necessary to include to get any + * typedef'ed information. This is only required if you have + * getgroups() or setgroups().. */ -/* SITEARCH_EXP: - * This symbol contains the ~name expanded version of SITEARCH, to be used - * in programs that are not prepared to deal with ~ expansion at run-time. +#if defined(HAS_GETGROUPS) || defined(HAS_SETGROUPS) +#define Groups_t $groupstype /* Type for 2nd arg to [sg]etgroups() */ +#endif + +/* DB_Prefix_t: + * This symbol contains the type of the prefix structure element + * in the header file. In older versions of DB, it was + * int, while in newer ones it is u_int32_t. */ -#define SITEARCH "$sitearch" /**/ -#define SITEARCH_EXP "$sitearchexp" /**/ +/* DB_Hash_t: + * This symbol contains the type of the prefix structure element + * in the header file. In older versions of DB, it was + * int, while in newer ones it is size_t. + */ +/* DB_VERSION_MAJOR_CFG: + * This symbol, if defined, defines the major version number of + * Berkeley DB found in the header when Perl was configured. + */ +/* DB_VERSION_MINOR_CFG: + * This symbol, if defined, defines the minor version number of + * Berkeley DB found in the header when Perl was configured. + * For DB version 1 this is always 0. + */ +/* DB_VERSION_PATCH_CFG: + * This symbol, if defined, defines the patch version number of + * Berkeley DB found in the header when Perl was configured. + * For DB version 1 this is always 0. + */ +#define DB_Hash_t $db_hashtype /**/ +#define DB_Prefix_t $db_prefixtype /**/ +#define DB_VERSION_MAJOR_CFG $db_version_major /**/ +#define DB_VERSION_MINOR_CFG $db_version_minor /**/ +#define DB_VERSION_PATCH_CFG $db_version_patch /**/ -/* SITELIB: - * This symbol contains the name of the private library for this package. - * The library is private in the sense that it needn't be in anyone's - * execution path, but it should be accessible by the world. The program - * should be prepared to do ~ expansion. - * The standard distribution will put nothing in this directory. - * Individual sites may place their own extensions and modules in - * this directory. +/* I_FP_CLASS: + * This symbol, if defined, indicates that exists and + * should be included. */ -/* SITELIB_EXP: - * This symbol contains the ~name expanded version of SITELIB, to be used - * in programs that are not prepared to deal with ~ expansion at run-time. +#$i_fp_class I_FP_CLASS /**/ + +/* I_GRP: + * This symbol, if defined, indicates to the C program that it should + * include . */ -#define SITELIB "$sitelib" /**/ -#define SITELIB_EXP "$sitelibexp" /**/ +/* GRPASSWD: + * This symbol, if defined, indicates to the C program that struct group + * in contains gr_passwd. + */ +#$i_grp I_GRP /**/ +#$d_grpasswd GRPASSWD /**/ -/* PERL_VENDORLIB_EXP: - * This symbol contains the ~name expanded version of VENDORLIB, to be used - * in programs that are not prepared to deal with ~ expansion at run-time. +/* I_IEEEFP: + * This symbol, if defined, indicates that exists and + * should be included. */ -#$d_vendorlib PERL_VENDORLIB_EXP "$vendorlibexp" /**/ +#$i_ieeefp I_IEEEFP /**/ -/* OSNAME: - * This symbol contains the name of the operating system, as determined - * by Configure. You shouldn't rely on it too much; the specific - * feature tests from Configure are generally more reliable. +/* I_INTTYPES: + * This symbol, if defined, indicates to the C program that it should + * include . */ -#define OSNAME "$osname" /**/ +#$i_inttypes I_INTTYPES /**/ -/* CAT2: - * This macro catenates 2 tokens together. +/* I_LIBUTIL: + * This symbol, if defined, indicates that exists and + * should be included. */ -/* STRINGIFY: - * This macro surrounds its token with double quotes. +#$i_libutil I_LIBUTIL /**/ + +/* I_MACH_CTHREADS: + * This symbol, if defined, indicates to the C program that it should + * include . */ -#if $cpp_stuff == 1 -#define CAT2(a,b)a/**/b -#define STRINGIFY(a)"a" - /* If you can get stringification with catify, tell me how! */ -#endif -#if $cpp_stuff == 42 -#define CAT2(a,b)a ## b -#define StGiFy(a)# a -#define STRINGIFY(a)StGiFy(a) -#endif -#if $cpp_stuff != 1 && $cpp_stuff != 42 -#include "Bletch: How does this C preprocessor catenate tokens?" -#endif +#$i_machcthr I_MACH_CTHREADS /**/ -/* CPPSTDIN: - * This symbol contains the first part of the string which will invoke - * the C preprocessor on the standard input and produce to standard - * output. Typical value of "cc -E" or "/lib/cpp", but it can also - * call a wrapper. See CPPRUN. +/* I_MNTENT: + * This symbol, if defined, indicates that exists and + * should be included. */ -/* CPPMINUS: - * This symbol contains the second part of the string which will invoke - * the C preprocessor on the standard input and produce to standard - * output. This symbol will have the value "-" if CPPSTDIN needs a minus - * to specify standard input, otherwise the value is "". +#$i_mntent I_MNTENT /**/ + +/* I_NETDB: + * This symbol, if defined, indicates that exists and + * should be included. */ -/* CPPRUN: - * This symbol contains the string which will invoke a C preprocessor on - * the standard input and produce to standard output. It needs to end - * with CPPLAST, after all other preprocessor flags have been specified. - * The main difference with CPPSTDIN is that this program will never be a - * pointer to a shell wrapper, i.e. it will be empty if no preprocessor is - * available directly to the user. Note that it may well be different from - * the preprocessor used to compile the C program. +#$i_netdb I_NETDB /**/ + +/* I_NETINET_TCP: + * This symbol, if defined, indicates to the C program that it should + * include . */ -/* CPPLAST: - * This symbol is intended to be used along with CPPRUN in the same manner - * symbol CPPMINUS is used with CPPSTDIN. It contains either "-" or "". +#$i_netinettcp I_NETINET_TCP /**/ + +/* I_POLL: + * This symbol, if defined, indicates that exists and + * should be included. */ -#define CPPSTDIN "$cppstdin" -#define CPPMINUS "$cppminus" -#define CPPRUN "$cpprun" -#define CPPLAST "$cpplast" +#$i_poll I_POLL /**/ -/* HAS_ACCESS: - * This manifest constant lets the C program know that the access() - * system call is available to check for accessibility using real UID/GID. - * (always present on UNIX.) +/* I_PROT: + * This symbol, if defined, indicates that exists and + * should be included. */ -#$d_access HAS_ACCESS /**/ +#$i_prot I_PROT /**/ -/* HAS_CSH: - * This symbol, if defined, indicates that the C-shell exists. +/* I_PTHREAD: + * This symbol, if defined, indicates to the C program that it should + * include . + */ +#$i_pthread I_PTHREAD /**/ + +/* I_PWD: + * This symbol, if defined, indicates to the C program that it should + * include . + */ +/* PWQUOTA: + * This symbol, if defined, indicates to the C program that struct passwd + * contains pw_quota. + */ +/* PWAGE: + * This symbol, if defined, indicates to the C program that struct passwd + * contains pw_age. + */ +/* PWCHANGE: + * This symbol, if defined, indicates to the C program that struct passwd + * contains pw_change. + */ +/* PWCLASS: + * This symbol, if defined, indicates to the C program that struct passwd + * contains pw_class. + */ +/* PWEXPIRE: + * This symbol, if defined, indicates to the C program that struct passwd + * contains pw_expire. */ -/* CSH: - * This symbol, if defined, contains the full pathname of csh. +/* PWCOMMENT: + * This symbol, if defined, indicates to the C program that struct passwd + * contains pw_comment. */ -#$d_csh HAS_CSH /**/ -#ifdef HAS_CSH -#define CSH "$full_csh" /**/ -#endif - -/* HAS_ENDGRENT: - * This symbol, if defined, indicates that the getgrent routine is - * available for finalizing sequential access of the group database. +/* PWGECOS: + * This symbol, if defined, indicates to the C program that struct passwd + * contains pw_gecos. */ -#$d_endgrent HAS_ENDGRENT /**/ - -/* HAS_ENDHOSTENT: - * This symbol, if defined, indicates that the endhostent() routine is - * available to close whatever was being used for host queries. +/* PWPASSWD: + * This symbol, if defined, indicates to the C program that struct passwd + * contains pw_passwd. */ -#$d_endhent HAS_ENDHOSTENT /**/ +#$i_pwd I_PWD /**/ +#$d_pwquota PWQUOTA /**/ +#$d_pwage PWAGE /**/ +#$d_pwchange PWCHANGE /**/ +#$d_pwclass PWCLASS /**/ +#$d_pwexpire PWEXPIRE /**/ +#$d_pwcomment PWCOMMENT /**/ +#$d_pwgecos PWGECOS /**/ +#$d_pwpasswd PWPASSWD /**/ -/* HAS_ENDNETENT: - * This symbol, if defined, indicates that the endnetent() routine is - * available to close whatever was being used for network queries. +/* I_SHADOW: + * This symbol, if defined, indicates that exists and + * should be included. */ -#$d_endnent HAS_ENDNETENT /**/ +#$i_shadow I_SHADOW /**/ -/* HAS_ENDPROTOENT: - * This symbol, if defined, indicates that the endprotoent() routine is - * available to close whatever was being used for protocol queries. +/* I_SOCKS: + * This symbol, if defined, indicates that exists and + * should be included. */ -#$d_endpent HAS_ENDPROTOENT /**/ +#$i_socks I_SOCKS /**/ -/* HAS_ENDPWENT: - * This symbol, if defined, indicates that the getgrent routine is - * available for finalizing sequential access of the passwd database. +/* I_SUNMATH: + * This symbol, if defined, indicates that exists and + * should be included. */ -#$d_endpwent HAS_ENDPWENT /**/ +#$i_sunmath I_SUNMATH /**/ -/* HAS_ENDSERVENT: - * This symbol, if defined, indicates that the endservent() routine is - * available to close whatever was being used for service queries. +/* I_SYSLOG: + * This symbol, if defined, indicates that exists and + * should be included. */ -#$d_endsent HAS_ENDSERVENT /**/ +#$i_syslog I_SYSLOG /**/ -/* HAS_GETGRENT: - * This symbol, if defined, indicates that the getgrent routine is - * available for sequential access of the group database. +/* I_SYSMODE: + * This symbol, if defined, indicates that exists and + * should be included. */ -#$d_getgrent HAS_GETGRENT /**/ +#$i_sysmode I_SYSMODE /**/ -/* HAS_GETHOSTBYADDR: - * This symbol, if defined, indicates that the gethostbyaddr() routine is - * available to look up hosts by their IP addresses. +/* I_SYS_MOUNT: + * This symbol, if defined, indicates that exists and + * should be included. */ -#$d_gethbyaddr HAS_GETHOSTBYADDR /**/ +#$i_sysmount I_SYS_MOUNT /**/ -/* HAS_GETHOSTBYNAME: - * This symbol, if defined, indicates that the gethostbyname() routine is - * available to look up host names in some data base or other. +/* I_SYS_STATFS: + * This symbol, if defined, indicates that exists. */ -#$d_gethbyname HAS_GETHOSTBYNAME /**/ +#$i_sysstatfs I_SYS_STATFS /**/ -/* HAS_GETHOSTENT: - * This symbol, if defined, indicates that the gethostent() routine is - * available to look up host names in some data base or another. +/* I_SYS_STATVFS: + * This symbol, if defined, indicates that exists and + * should be included. */ -#$d_gethent HAS_GETHOSTENT /**/ +#$i_sysstatvfs I_SYS_STATVFS /**/ -/* HAS_GETHOSTNAME: - * This symbol, if defined, indicates that the C program may use the - * gethostname() routine to derive the host name. See also HAS_UNAME - * and PHOSTNAME. - */ -/* HAS_UNAME: - * This symbol, if defined, indicates that the C program may use the - * uname() routine to derive the host name. See also HAS_GETHOSTNAME - * and PHOSTNAME. - */ -/* PHOSTNAME: - * This symbol, if defined, indicates the command to feed to the - * popen() routine to derive the host name. See also HAS_GETHOSTNAME - * and HAS_UNAME. Note that the command uses a fully qualified path, - * so that it is safe even if used by a process with super-user - * privileges. - */ -/* HAS_PHOSTNAME: - * This symbol, if defined, indicates that the C program may use the - * contents of PHOSTNAME as a command to feed to the popen() routine - * to derive the host name. +/* I_SYSUIO: + * This symbol, if defined, indicates that exists and + * should be included. */ -#$d_gethname HAS_GETHOSTNAME /**/ -#$d_uname HAS_UNAME /**/ -#$d_phostname HAS_PHOSTNAME -#ifdef HAS_PHOSTNAME -#define PHOSTNAME "$aphostname" /* How to get the host name */ -#endif +#$i_sysuio I_SYSUIO /**/ -/* HAS_GETNETBYADDR: - * This symbol, if defined, indicates that the getnetbyaddr() routine is - * available to look up networks by their IP addresses. +/* I_SYSUTSNAME: + * This symbol, if defined, indicates that exists and + * should be included. */ -#$d_getnbyaddr HAS_GETNETBYADDR /**/ +#$i_sysutsname I_SYSUTSNAME /**/ -/* HAS_GETNETBYNAME: - * This symbol, if defined, indicates that the getnetbyname() routine is - * available to look up networks by their names. +/* I_SYS_VFS: + * This symbol, if defined, indicates that exists and + * should be included. */ -#$d_getnbyname HAS_GETNETBYNAME /**/ +#$i_sysvfs I_SYS_VFS /**/ -/* HAS_GETNETENT: - * This symbol, if defined, indicates that the getnetent() routine is - * available to look up network names in some data base or another. +/* I_TIME: + * This symbol, if defined, indicates to the C program that it should + * include . */ -#$d_getnent HAS_GETNETENT /**/ - -/* HAS_GETPROTOENT: - * This symbol, if defined, indicates that the getprotoent() routine is - * available to look up protocols in some data base or another. +/* I_SYS_TIME: + * This symbol, if defined, indicates to the C program that it should + * include . */ -#$d_getpent HAS_GETPROTOENT /**/ - -/* HAS_GETPROTOBYNAME: - * This symbol, if defined, indicates that the getprotobyname() - * routine is available to look up protocols by their name. +/* I_SYS_TIME_KERNEL: + * This symbol, if defined, indicates to the C program that it should + * include with KERNEL defined. */ -/* HAS_GETPROTOBYNUMBER: - * This symbol, if defined, indicates that the getprotobynumber() - * routine is available to look up protocols by their number. +/* HAS_TM_TM_ZONE: + * This symbol, if defined, indicates to the C program that + * the struct tm has a tm_zone field. */ -#$d_getpbyname HAS_GETPROTOBYNAME /**/ -#$d_getpbynumber HAS_GETPROTOBYNUMBER /**/ - -/* HAS_GETPWENT: - * This symbol, if defined, indicates that the getpwent routine is - * available for sequential access of the passwd database. - * If this is not available, the older getpw() function may be available. +/* HAS_TM_TM_GMTOFF: + * This symbol, if defined, indicates to the C program that + * the struct tm has a tm_gmtoff field. */ -#$d_getpwent HAS_GETPWENT /**/ +#$i_time I_TIME /**/ +#$i_systime I_SYS_TIME /**/ +#$i_systimek I_SYS_TIME_KERNEL /**/ +#$d_tm_tm_zone HAS_TM_TM_ZONE /**/ +#$d_tm_tm_gmtoff HAS_TM_TM_GMTOFF /**/ -/* HAS_GETSERVENT: - * This symbol, if defined, indicates that the getservent() routine is - * available to look up network services in some data base or another. +/* I_USTAT: + * This symbol, if defined, indicates that exists and + * should be included. */ -#$d_getsent HAS_GETSERVENT /**/ +#$i_ustat I_USTAT /**/ -/* HAS_GETSERVBYNAME: - * This symbol, if defined, indicates that the getservbyname() - * routine is available to look up services by their name. - */ -/* HAS_GETSERVBYPORT: - * This symbol, if defined, indicates that the getservbyport() - * routine is available to look up services by their port. +/* PERL_INC_VERSION_LIST: + * This variable specifies the list of subdirectories in over + * which perl.c:incpush() and lib/lib.pm will automatically + * search when adding directories to @INC, in a format suitable + * for a C initialization string. See the inc_version_list entry + * in Porting/Glossary for more details. */ -#$d_getsbyname HAS_GETSERVBYNAME /**/ -#$d_getsbyport HAS_GETSERVBYPORT /**/ +#define PERL_INC_VERSION_LIST $inc_version_list_init /**/ -/* HAS_HTONL: - * This symbol, if defined, indicates that the htonl() routine (and - * friends htons() ntohl() ntohs()) are available to do network - * order byte swapping. - */ -/* HAS_HTONS: - * This symbol, if defined, indicates that the htons() routine (and - * friends htonl() ntohl() ntohs()) are available to do network - * order byte swapping. - */ -/* HAS_NTOHL: - * This symbol, if defined, indicates that the ntohl() routine (and - * friends htonl() htons() ntohs()) are available to do network - * order byte swapping. - */ -/* HAS_NTOHS: - * This symbol, if defined, indicates that the ntohs() routine (and - * friends htonl() htons() ntohl()) are available to do network - * order byte swapping. +/* INSTALL_USR_BIN_PERL: + * This symbol, if defined, indicates that Perl is to be installed + * also as /usr/bin/perl. */ -#$d_htonl HAS_HTONL /**/ -#$d_htonl HAS_HTONS /**/ -#$d_htonl HAS_NTOHL /**/ -#$d_htonl HAS_NTOHS /**/ +#$installusrbinperl INSTALL_USR_BIN_PERL /**/ -/* HAS_LONG_DOUBLE: - * This symbol will be defined if the C compiler supports long - * doubles. +/* PERL_PRIfldbl: + * This symbol, if defined, contains the string used by stdio to + * format long doubles (format 'f') for output. */ -/* LONG_DOUBLESIZE: - * This symbol contains the size of a long double, so that the - * C preprocessor can make decisions based on it. It is only - * defined if the system supports long doubles. +/* PERL_PRIgldbl: + * This symbol, if defined, contains the string used by stdio to + * format long doubles (format 'g') for output. */ -#$d_longdbl HAS_LONG_DOUBLE /**/ -#ifdef HAS_LONG_DOUBLE -#define LONG_DOUBLESIZE $longdblsize /**/ -#endif - -/* HAS_LONG_LONG: - * This symbol will be defined if the C compiler supports long long. +/* PERL_PRIeldbl: + * This symbol, if defined, contains the string used by stdio to + * format long doubles (format 'e') for output. */ -/* LONGLONGSIZE: - * This symbol contains the size of a long long, so that the - * C preprocessor can make decisions based on it. It is only - * defined if the system supports long long. +/* PERL_SCNfldbl: + * This symbol, if defined, contains the string used by stdio to + * format long doubles (format 'f') for input. */ -#$d_longlong HAS_LONG_LONG /**/ -#ifdef HAS_LONG_LONG -#define LONGLONGSIZE $longlongsize /**/ -#endif +#$d_PRIfldbl PERL_PRIfldbl $sPRIfldbl /**/ +#$d_PRIgldbl PERL_PRIgldbl $sPRIgldbl /**/ +#$d_PRIeldbl PERL_PRIeldbl $sPRIeldbl /**/ +#$d_SCNfldbl PERL_SCNfldbl $sSCNfldbl /**/ -/* HAS_MEMCHR: - * This symbol, if defined, indicates that the memchr routine is available - * to locate characters within a C string. +/* Off_t: + * This symbol holds the type used to declare offsets in the kernel. + * It can be int, long, off_t, etc... It may be necessary to include + * to get any typedef'ed information. + */ +/* LSEEKSIZE: + * This symbol holds the number of bytes used by the Off_t. */ -#$d_memchr HAS_MEMCHR /**/ +/* Off_t_size: + * This symbol holds the number of bytes used by the Off_t. + */ +#define Off_t $lseektype /* type */ +#define LSEEKSIZE $lseeksize /* size */ +#define Off_t_size $lseeksize /* size */ -/* HAS_MMAP: - * This symbol, if defined, indicates that the mmap system call is - * available to map a file into memory. +/* Free_t: + * This variable contains the return type of free(). It is usually + * void, but occasionally int. */ -/* Mmap_t: - * This symbol holds the return type of the mmap() system call - * (and simultaneously the type of the first argument). - * Usually set to 'void *' or 'cadd_t'. +/* Malloc_t: + * This symbol is the type of pointer returned by malloc and realloc. */ -#$d_mmap HAS_MMAP /**/ -#define Mmap_t $mmaptype /**/ +#define Malloc_t $malloctype /**/ +#define Free_t $freetype /**/ -/* HAS_MSG: - * This symbol, if defined, indicates that the entire msg*(2) library is - * supported (IPC mechanism based on message queues). +/* PERL_MALLOC_WRAP: + * This symbol, if defined, indicates that we'd like malloc wrap checks. */ -#$d_msg HAS_MSG /**/ +#$usemallocwrap PERL_MALLOC_WRAP /**/ -/* HAS_SEM: - * This symbol, if defined, indicates that the entire sem*(2) library is - * supported. +/* MYMALLOC: + * This symbol, if defined, indicates that we're using our own malloc. */ -#$d_sem HAS_SEM /**/ +#$d_mymalloc MYMALLOC /**/ -/* HAS_SETGRENT: - * This symbol, if defined, indicates that the setgrent routine is - * available for initializing sequential access of the group database. +/* Mode_t: + * This symbol holds the type used to declare file modes + * for systems calls. It is usually mode_t, but may be + * int or unsigned short. It may be necessary to include + * to get any typedef'ed information. */ -#$d_setgrent HAS_SETGRENT /**/ +#define Mode_t $modetype /* file mode parameter for system calls */ -/* HAS_SETGROUPS: - * This symbol, if defined, indicates that the setgroups() routine is - * available to set the list of process groups. If unavailable, multiple - * groups are probably not supported. +/* VAL_O_NONBLOCK: + * This symbol is to be used during open() or fcntl(F_SETFL) to turn on + * non-blocking I/O for the file descriptor. Note that there is no way + * back, i.e. you cannot turn it blocking again this way. If you wish to + * alternatively switch between blocking and non-blocking, use the + * ioctl(FIOSNBIO) call instead, but that is not supported by all devices. */ -#$d_setgrps HAS_SETGROUPS /**/ - -/* HAS_SETHOSTENT: - * This symbol, if defined, indicates that the sethostent() routine is - * available. +/* VAL_EAGAIN: + * This symbol holds the errno error code set by read() when no data was + * present on the non-blocking file descriptor. */ -#$d_sethent HAS_SETHOSTENT /**/ - -/* HAS_SETNETENT: - * This symbol, if defined, indicates that the setnetent() routine is - * available. +/* RD_NODATA: + * This symbol holds the return code from read() when no data is present + * on the non-blocking file descriptor. Be careful! If EOF_NONBLOCK is + * not defined, then you can't distinguish between no data and EOF by + * issuing a read(). You'll have to find another way to tell for sure! */ -#$d_setnent HAS_SETNETENT /**/ - -/* HAS_SETPROTOENT: - * This symbol, if defined, indicates that the setprotoent() routine is - * available. +/* EOF_NONBLOCK: + * This symbol, if defined, indicates to the C program that a read() on + * a non-blocking file descriptor will return 0 on EOF, and not the value + * held in RD_NODATA (-1 usually, in that case!). */ -#$d_setpent HAS_SETPROTOENT /**/ +#define VAL_O_NONBLOCK $o_nonblock +#define VAL_EAGAIN $eagain +#define RD_NODATA $rd_nodata +#$d_eofnblk EOF_NONBLOCK -/* HAS_SETPWENT: - * This symbol, if defined, indicates that the setpwent routine is - * available for initializing sequential access of the passwd database. +/* NEED_VA_COPY: + * This symbol, if defined, indicates that the system stores + * the variable argument list datatype, va_list, in a format + * that cannot be copied by simple assignment, so that some + * other means must be used when copying is required. + * As such systems vary in their provision (or non-provision) + * of copying mechanisms, handy.h defines a platform- + * independent macro, Perl_va_copy(src, dst), to do the job. */ -#$d_setpwent HAS_SETPWENT /**/ +#$need_va_copy NEED_VA_COPY /**/ -/* HAS_SETSERVENT: - * This symbol, if defined, indicates that the setservent() routine is - * available. +/* Netdb_host_t: + * This symbol holds the type used for the 1st argument + * to gethostbyaddr(). */ -#$d_setsent HAS_SETSERVENT /**/ - -/* HAS_SETVBUF: - * This symbol, if defined, indicates that the setvbuf routine is - * available to change buffering on an open stdio stream. - * to a line-buffered mode. +/* Netdb_hlen_t: + * This symbol holds the type used for the 2nd argument + * to gethostbyaddr(). */ -#$d_setvbuf HAS_SETVBUF /**/ - -/* HAS_SHM: - * This symbol, if defined, indicates that the entire shm*(2) library is - * supported. +/* Netdb_name_t: + * This symbol holds the type used for the argument to + * gethostbyname(). */ -#$d_shm HAS_SHM /**/ +/* Netdb_net_t: + * This symbol holds the type used for the 1st argument to + * getnetbyaddr(). + */ +#define Netdb_host_t $netdb_host_type /**/ +#define Netdb_hlen_t $netdb_hlen_type /**/ +#define Netdb_name_t $netdb_name_type /**/ +#define Netdb_net_t $netdb_net_type /**/ -/* HAS_SOCKET: - * This symbol, if defined, indicates that the BSD socket interface is - * supported. +/* PERL_OTHERLIBDIRS: + * This variable contains a colon-separated set of paths for the perl + * binary to search for additional library files or modules. + * These directories will be tacked to the end of @INC. + * Perl will automatically search below each path for version- + * and architecture-specific directories. See PERL_INC_VERSION_LIST + * for more details. + */ +#$d_perl_otherlibdirs PERL_OTHERLIBDIRS "$otherlibdirs" /**/ + +/* HAS_QUAD: + * This symbol, if defined, tells that there's a 64-bit integer type, + * Quad_t, and its unsigned counterpar, Uquad_t. QUADKIND will be one + * of QUAD_IS_INT, QUAD_IS_LONG, QUAD_IS_LONG_LONG, or QUAD_IS_INT64_T. + */ +#$d_quad HAS_QUAD /**/ +#ifdef HAS_QUAD +# define Quad_t $quadtype /**/ +# define Uquad_t $uquadtype /**/ +# define QUADKIND $quadkind /**/ +# define QUAD_IS_INT 1 +# define QUAD_IS_LONG 2 +# define QUAD_IS_LONG_LONG 3 +# define QUAD_IS_INT64_T 4 +#endif + +/* IVTYPE: + * This symbol defines the C type used for Perl's IV. */ -/* HAS_SOCKETPAIR: - * This symbol, if defined, indicates that the BSD socketpair() call is - * supported. +/* UVTYPE: + * This symbol defines the C type used for Perl's UV. */ -/* HAS_MSG_CTRUNC: - * This symbol, if defined, indicates that the MSG_CTRUNC is supported. - * Checking just with #ifdef might not be enough because this symbol - * has been known to be an enum. +/* I8TYPE: + * This symbol defines the C type used for Perl's I8. */ -/* HAS_MSG_DONTROUTE: - * This symbol, if defined, indicates that the MSG_DONTROUTE is supported. - * Checking just with #ifdef might not be enough because this symbol - * has been known to be an enum. +/* U8TYPE: + * This symbol defines the C type used for Perl's U8. */ -/* HAS_MSG_OOB: - * This symbol, if defined, indicates that the MSG_OOB is supported. - * Checking just with #ifdef might not be enough because this symbol - * has been known to be an enum. +/* I16TYPE: + * This symbol defines the C type used for Perl's I16. */ -/* HAS_MSG_PEEK: - * This symbol, if defined, indicates that the MSG_PEEK is supported. - * Checking just with #ifdef might not be enough because this symbol - * has been known to be an enum. +/* U16TYPE: + * This symbol defines the C type used for Perl's U16. */ -/* HAS_MSG_PROXY: - * This symbol, if defined, indicates that the MSG_PROXY is supported. - * Checking just with #ifdef might not be enough because this symbol - * has been known to be an enum. +/* I32TYPE: + * This symbol defines the C type used for Perl's I32. */ -/* HAS_SCM_RIGHTS: - * This symbol, if defined, indicates that the SCM_RIGHTS is supported. - * Checking just with #ifdef might not be enough because this symbol - * has been known to be an enum. +/* U32TYPE: + * This symbol defines the C type used for Perl's U32. */ -/* HAS_SENDMSG: - * This symbol, if defined, indicates that the sendmsg is supported - * to send messages between sockets. You will also need struct - * iovec from , HAS_STRUCT_IOVEC and I_SYSUIO. +/* I64TYPE: + * This symbol defines the C type used for Perl's I64. */ -/* HAS_RECVMSG: - * This symbol, if defined, indicates that the recvmsg is supported - * to send messages between sockets. You will also need struct - * iovec from , HAS_STRUCT_IOVEC and I_SYSUIO. +/* U64TYPE: + * This symbol defines the C type used for Perl's U64. */ -/* HAS_STRUCT_MSGHDR: - * This symbol, if defined, indicates that the struct msghdr - * (BSD 4.3 or 4.4) is supported. You will also need struct - * iovec from , HAS_STRUCT_IOVEC and I_SYSUIO. +/* NVTYPE: + * This symbol defines the C type used for Perl's NV. */ -/* HAS_STRUCT_CMSGHDR: - * This symbol, if defined, indicates that the struct cmsghdr - * (BSD 4.4) is supported. You will also need struct - * iovec from , HAS_STRUCT_IOVEC and I_SYSUIO. +/* IVSIZE: + * This symbol contains the sizeof(IV). */ -#$d_socket HAS_SOCKET /**/ -#$d_sockpair HAS_SOCKETPAIR /**/ -#$d_msg_ctrunc HAS_MSG_CTRUNC /**/ -#$d_msg_dontroute HAS_MSG_DONTROUTE /**/ -#$d_msg_oob HAS_MSG_OOB /**/ -#$d_msg_peek HAS_MSG_PEEK /**/ -#$d_msg_proxy HAS_MSG_PROXY /**/ -#$d_scm_rights HAS_SCM_RIGHTS /**/ -#$d_sendmsg HAS_SENDMSG /**/ -#$d_recvmsg HAS_RECVMSG /**/ -#$d_msghdr_s HAS_STRUCT_MSGHDR /**/ -#$d_cmsghdr_s HAS_STRUCT_CMSGHDR /**/ - -/* USE_STAT_BLOCKS: - * This symbol is defined if this system has a stat structure declaring - * st_blksize and st_blocks. +/* UVSIZE: + * This symbol contains the sizeof(UV). */ -#$d_statblks USE_STAT_BLOCKS /**/ - -/* HAS_STRERROR: - * This symbol, if defined, indicates that the strerror routine is - * available to translate error numbers to strings. See the writeup - * of Strerror() in this file before you try to define your own. +/* I8SIZE: + * This symbol contains the sizeof(I8). */ -/* HAS_SYS_ERRLIST: - * This symbol, if defined, indicates that the sys_errlist array is - * available to translate error numbers to strings. The extern int - * sys_nerr gives the size of that table. +/* U8SIZE: + * This symbol contains the sizeof(U8). */ -/* Strerror: - * This preprocessor symbol is defined as a macro if strerror() is - * not available to translate error numbers to strings but sys_errlist[] - * array is there. +/* I16SIZE: + * This symbol contains the sizeof(I16). */ -#$d_strerror HAS_STRERROR /**/ -#$d_syserrlst HAS_SYS_ERRLIST /**/ -#define Strerror(e) $d_strerrm - -/* HAS_UNION_SEMUN: - * This symbol, if defined, indicates that the union semun is - * defined by including . If not, the user code - * probably needs to define it as: - * union semun { - * int val; - * struct semid_ds *buf; - * unsigned short *array; - * } +/* U16SIZE: + * This symbol contains the sizeof(U16). */ -/* USE_SEMCTL_SEMUN: - * This symbol, if defined, indicates that union semun is - * used for semctl IPC_STAT. +/* I32SIZE: + * This symbol contains the sizeof(I32). */ -/* USE_SEMCTL_SEMID_DS: - * This symbol, if defined, indicates that struct semid_ds * is - * used for semctl IPC_STAT. +/* U32SIZE: + * This symbol contains the sizeof(U32). */ -#$d_union_semun HAS_UNION_SEMUN /**/ -#$d_semctl_semun USE_SEMCTL_SEMUN /**/ -#$d_semctl_semid_ds USE_SEMCTL_SEMID_DS /**/ - -/* HAS_VFORK: - * This symbol, if defined, indicates that vfork() exists. +/* I64SIZE: + * This symbol contains the sizeof(I64). */ -#$d_vfork HAS_VFORK /**/ - -/* Signal_t: - * This symbol's value is either "void" or "int", corresponding to the - * appropriate return type of a signal handler. Thus, you can declare - * a signal handler using "Signal_t (*handler)()", and define the - * handler using "Signal_t handler(sig)". +/* U64SIZE: + * This symbol contains the sizeof(U64). */ -#define Signal_t $signal_t /* Signal handler's return type */ - -/* Groups_t: - * This symbol holds the type used for the second argument to - * getgroups() and setgropus(). Usually, this is the same as - * gidtype (gid_t) , but sometimes it isn't. - * It can be int, ushort, uid_t, etc... - * It may be necessary to include to get any - * typedef'ed information. This is only required if you have - * getgroups() or setgropus().. +/* NVSIZE: + * This symbol contains the sizeof(NV). */ -#if defined(HAS_GETGROUPS) || defined(HAS_SETGROUPS) -#define Groups_t $groupstype /* Type for 2nd arg to [sg]etgroups() */ -#endif - -/* I_GRP: - * This symbol, if defined, indicates to the C program that it should - * include . +/* NV_PRESERVES_UV: + * This symbol, if defined, indicates that a variable of type NVTYPE + * can preserve all the bits of a variable of type UVTYPE. */ -/* GRPASSWD: - * This symbol, if defined, indicates to the C program that struct group - * in contains gr_passwd. +/* NV_PRESERVES_UV_BITS: + * This symbol contains the number of bits a variable of type NVTYPE + * can preserve of a variable of type UVTYPE. */ -#$i_grp I_GRP /**/ -#$d_grpasswd GRPASSWD /**/ - -/* I_NETDB: - * This symbol, if defined, indicates that exists and - * should be included. +/* NV_ZERO_IS_ALLBITS_ZERO: + * This symbol, if defined, indicates that a variable of type NVTYPE + * stores 0.0 in memory as all bits zero. */ -#$i_netdb I_NETDB /**/ +#define IVTYPE $ivtype /**/ +#define UVTYPE $uvtype /**/ +#define I8TYPE $i8type /**/ +#define U8TYPE $u8type /**/ +#define I16TYPE $i16type /**/ +#define U16TYPE $u16type /**/ +#define I32TYPE $i32type /**/ +#define U32TYPE $u32type /**/ +#ifdef HAS_QUAD +#define I64TYPE $i64type /**/ +#define U64TYPE $u64type /**/ +#endif +#define NVTYPE $nvtype /**/ +#define IVSIZE $ivsize /**/ +#define UVSIZE $uvsize /**/ +#define I8SIZE $i8size /**/ +#define U8SIZE $u8size /**/ +#define I16SIZE $i16size /**/ +#define U16SIZE $u16size /**/ +#define I32SIZE $i32size /**/ +#define U32SIZE $u32size /**/ +#ifdef HAS_QUAD +#define I64SIZE $i64size /**/ +#define U64SIZE $u64size /**/ +#endif +#define NVSIZE $nvsize /**/ +#$d_nv_preserves_uv NV_PRESERVES_UV +#define NV_PRESERVES_UV_BITS $nv_preserves_uv_bits +#$d_nv_zero_is_allbits_zero NV_ZERO_IS_ALLBITS_ZERO +#if UVSIZE == 8 +# ifdef BYTEORDER +# if BYTEORDER == 0x1234 +# undef BYTEORDER +# define BYTEORDER 0x12345678 +# else +# if BYTEORDER == 0x4321 +# undef BYTEORDER +# define BYTEORDER 0x87654321 +# endif +# endif +# endif +#endif -/* I_PWD: - * This symbol, if defined, indicates to the C program that it should - * include . - */ -/* PWQUOTA: - * This symbol, if defined, indicates to the C program that struct passwd - * contains pw_quota. +/* IVdf: + * This symbol defines the format string used for printing a Perl IV + * as a signed decimal integer. */ -/* PWAGE: - * This symbol, if defined, indicates to the C program that struct passwd - * contains pw_age. +/* UVuf: + * This symbol defines the format string used for printing a Perl UV + * as an unsigned decimal integer. */ -/* PWCHANGE: - * This symbol, if defined, indicates to the C program that struct passwd - * contains pw_change. +/* UVof: + * This symbol defines the format string used for printing a Perl UV + * as an unsigned octal integer. */ -/* PWCLASS: - * This symbol, if defined, indicates to the C program that struct passwd - * contains pw_class. +/* UVxf: + * This symbol defines the format string used for printing a Perl UV + * as an unsigned hexadecimal integer in lowercase abcdef. */ -/* PWEXPIRE: - * This symbol, if defined, indicates to the C program that struct passwd - * contains pw_expire. +/* UVXf: + * This symbol defines the format string used for printing a Perl UV + * as an unsigned hexadecimal integer in uppercase ABCDEF. */ -/* PWCOMMENT: - * This symbol, if defined, indicates to the C program that struct passwd - * contains pw_comment. +/* NVef: + * This symbol defines the format string used for printing a Perl NV + * using %e-ish floating point format. */ -/* PWGECOS: - * This symbol, if defined, indicates to the C program that struct passwd - * contains pw_gecos. +/* NVff: + * This symbol defines the format string used for printing a Perl NV + * using %f-ish floating point format. */ -/* PWPASSWD: - * This symbol, if defined, indicates to the C program that struct passwd - * contains pw_passwd. +/* NVgf: + * This symbol defines the format string used for printing a Perl NV + * using %g-ish floating point format. */ -#$i_pwd I_PWD /**/ -#$d_pwquota PWQUOTA /**/ -#$d_pwage PWAGE /**/ -#$d_pwchange PWCHANGE /**/ -#$d_pwclass PWCLASS /**/ -#$d_pwexpire PWEXPIRE /**/ -#$d_pwcomment PWCOMMENT /**/ -#$d_pwgecos PWGECOS /**/ -#$d_pwpasswd PWPASSWD /**/ +#define IVdf $ivdformat /**/ +#define UVuf $uvuformat /**/ +#define UVof $uvoformat /**/ +#define UVxf $uvxformat /**/ +#define UVXf $uvXUformat /**/ +#define NVef $nveformat /**/ +#define NVff $nvfformat /**/ +#define NVgf $nvgformat /**/ -/* I_SYSUIO: - * This symbol, if defined, indicates that exists and - * should be included. +/* Pid_t: + * This symbol holds the type used to declare process ids in the kernel. + * It can be int, uint, pid_t, etc... It may be necessary to include + * to get any typedef'ed information. + */ +#define Pid_t $pidtype /* PID type */ + +/* PRIVLIB: + * This symbol contains the name of the private library for this package. + * The library is private in the sense that it needn't be in anyone's + * execution path, but it should be accessible by the world. The program + * should be prepared to do ~ expansion. */ -/* HAS_STRUCT_IOVEC: - * This symbol, if defined, indicates that the struct iovec - * to do scatter writes/gather reads is supported. +/* PRIVLIB_EXP: + * This symbol contains the ~name expanded version of PRIVLIB, to be used + * in programs that are not prepared to deal with ~ expansion at run-time. */ -#$i_sysuio I_SYSUIO /**/ -#$d_iovec_s HAS_STRUCT_IOVEC /**/ +#define PRIVLIB "$privlib" /**/ +#define PRIVLIB_EXP "$privlibexp" /**/ -/* Free_t: - * This variable contains the return type of free(). It is usually - * void, but occasionally int. +/* PTRSIZE: + * This symbol contains the size of a pointer, so that the C preprocessor + * can make decisions based on it. It will be sizeof(void *) if + * the compiler supports (void *); otherwise it will be + * sizeof(char *). */ -/* Malloc_t: - * This symbol is the type of pointer returned by malloc and realloc. +#define PTRSIZE $ptrsize /**/ + +/* Drand01: + * This macro is to be used to generate uniformly distributed + * random numbers over the range [0., 1.[. You may have to supply + * an 'extern double drand48();' in your program since SunOS 4.1.3 + * doesn't provide you with anything relevant in its headers. + * See HAS_DRAND48_PROTO. */ -#define Malloc_t $malloctype /**/ -#define Free_t $freetype /**/ +/* Rand_seed_t: + * This symbol defines the type of the argument of the + * random seed function. + */ +/* seedDrand01: + * This symbol defines the macro to be used in seeding the + * random number generator (see Drand01). + */ +/* RANDBITS: + * This symbol indicates how many bits are produced by the + * function used to generate normalized random numbers. + * Values include 15, 16, 31, and 48. + */ +#define Drand01() $drand01 /**/ +#define Rand_seed_t $randseedtype /**/ +#define seedDrand01(x) $seedfunc((Rand_seed_t)x) /**/ +#define RANDBITS $randbits /**/ -/* MYMALLOC: - * This symbol, if defined, indicates that we're using our own malloc. +/* SELECT_MIN_BITS: + * This symbol holds the minimum number of bits operated by select. + * That is, if you do select(n, ...), how many bits at least will be + * cleared in the masks if some activity is detected. Usually this + * is either n or 32*ceil(n/32), especially many little-endians do + * the latter. This is only useful if you have select(), naturally. */ -#$d_mymalloc MYMALLOC /**/ +#define SELECT_MIN_BITS $selectminbits /**/ + +/* Select_fd_set_t: + * This symbol holds the type used for the 2nd, 3rd, and 4th + * arguments to select. Usually, this is 'fd_set *', if HAS_FD_SET + * is defined, and 'int *' otherwise. This is only useful if you + * have select(), of course. + */ +#define Select_fd_set_t $selecttype /**/ /* SIG_NAME: * This symbol contains a list of signal names in order of @@ -2114,7 +3440,9 @@ sed <config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un- * etc., where nn is the actual signal number (e.g. NUM37). * The signal number for sig_name[i] is stored in sig_num[i]. * The last element is 0 to terminate the list with a NULL. This - * corresponds to the 0 at the end of the sig_num list. + * corresponds to the 0 at the end of the sig_name_init list. + * Note that this variable is initialized from the sig_name_init, + * not from sig_name (which is unused). */ /* SIG_NUM: * This symbol contains a list of signal numbers, in the same order as the @@ -2128,671 +3456,952 @@ sed <config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un- * The signal number corresponding to sig_name[i] is sig_number[i]. * if (i < NSIG) then sig_number[i] == i. * The last element is 0, corresponding to the 0 at the end of - * the sig_name list. + * the sig_name_init list. + * Note that this variable is initialized from the sig_num_init, + * not from sig_num (which is unused). + */ +/* SIG_SIZE: + * This variable contains the number of elements of the SIG_NAME + * and SIG_NUM arrays, excluding the final NULL entry. */ #define SIG_NAME $sig_name_init /**/ #define SIG_NUM $sig_num_init /**/ +#define SIG_SIZE $sig_size /**/ -/* VOIDFLAGS: - * This symbol indicates how much support of the void type is given by this - * compiler. What various bits mean: - * - * 1 = supports declaration of void - * 2 = supports arrays of pointers to functions returning void - * 4 = supports comparisons between pointers to void functions and - * addresses of void functions - * 8 = suports declaration of generic void pointers - * - * The package designer should define VOIDUSED to indicate the requirements - * of the package. This can be done either by #defining VOIDUSED before - * including config.h, or by defining defvoidused in Myinit.U. If the - * latter approach is taken, only those flags will be tested. If the - * level of void support necessary is not present, defines void to int. - */ -#ifndef VOIDUSED -#define VOIDUSED $defvoidused -#endif -#define VOIDFLAGS $voidflags -#if (VOIDFLAGS & VOIDUSED) != VOIDUSED -#define void int /* is void to be avoided? */ -#define M_VOID /* Xenix strikes again */ -#endif - -/* HAS_ATOLF: - * This symbol, if defined, indicates that the atolf routine is - * available to convert strings into long doubles. - */ -#$d_atolf HAS_ATOLF /**/ - -/* HAS_ATOLL: - * This symbol, if defined, indicates that the atoll routine is - * available to convert strings into long longs. - */ -#$d_atoll HAS_ATOLL /**/ - -/* PERL_BINCOMPAT_5005: - * This symbol, if defined, indicates that Perl 5.006 should be - * binary-compatible with Perl 5.005. This is impossible for builds - * that use features like threads and multiplicity it is always $undef - * for those versions. - */ -#$d_bincompat5005 PERL_BINCOMPAT_5005 /**/ - -/* DLSYM_NEEDS_UNDERSCORE: - * This symbol, if defined, indicates that we need to prepend an - * underscore to the symbol name before calling dlsym(). This only - * makes sense if you *have* dlsym, which we will presume is the - * case if you're using dl_dlopen.xs. - */ -#$d_dlsymun DLSYM_NEEDS_UNDERSCORE /**/ - -/* HAS_ENDSPENT: - * This symbol, if defined, indicates that the endspent system call is - * available to finalize the scan of SysV shadow password entries. - */ -#$d_endspent HAS_ENDSPENT /**/ - -/* HAS_FSEEKO: - * This symbol, if defined, indicates that the fseeko routine is - * available to fseek beyond 32 bits (useful for ILP32 hosts). - */ -#$d_fseeko HAS_FSEEKO /**/ - -/* HAS_FSTATFS: - * This symbol, if defined, indicates that the fstatfs routine is - * available to stat filesystems by file descriptors. - */ -#$d_fstatfs HAS_FSTATFS /**/ -/* HAS_FTELLO: - * This symbol, if defined, indicates that the ftello routine is - * available to ftell beyond 32 bits (useful for ILP32 hosts). - */ -#$d_ftello HAS_FTELLO /**/ - -/* HAS_GETMNTENT: - * This symbol, if defined, indicates that the getmntent routine is - * available to iterate through mounted file systems to get their info. - */ -#$d_getmntent HAS_GETMNTENT /**/ - -/* HAS_GETSPENT: - * This symbol, if defined, indicates that the getspent system call is - * available to retrieve SysV shadow password entries sequentially. - */ -#$d_getspent HAS_GETSPENT /**/ - -/* HAS_GETSPNAM: - * This symbol, if defined, indicates that the getspnam system call is - * available to retrieve SysV shadow password entries by name. - */ -#$d_getspnam HAS_GETSPNAM /**/ - -/* HAS_HASMNTOPT: - * This symbol, if defined, indicates that the hasmntopt routine is - * available to query the mount options of file systems. - */ -#$d_hasmntopt HAS_HASMNTOPT /**/ - -/* HAS_LDBL_DIG: - * This symbol, if defined, indicates that this system's - * or defines the symbol LDBL_DIG, which is the number - * of significant digits in a long double precision number. Unlike - * for DBL_DIG, there's no good guess for LDBL_DIG if it is undefined. - */ -#$d_ldbl_dig HAS_LDBL_DIG /* */ - -/* HAS_MADVISE: - * This symbol, if defined, indicates that the madvise system call is - * available to map a file into memory. - */ -#$d_madvise HAS_MADVISE /**/ - -/* HAS_MPROTECT: - * This symbol, if defined, indicates that the mprotect system call is - * available to modify the access protection of a memory mapped file. - */ -#$d_mprotect HAS_MPROTECT /**/ - -/* HAS_READV: - * This symbol, if defined, indicates that the readv routine is - * available to do gather reads. You will also need - * and there I_SYSUIO. - */ -#$d_readv HAS_READV /**/ - -/* HAS_SETSPENT: - * This symbol, if defined, indicates that the setspent system call is - * available to initialize the scan of SysV shadow password entries. - */ -#$d_setspent HAS_SETSPENT /**/ - -/* USE_SFIO: - * This symbol, if defined, indicates that sfio should - * be used. +/* SITEARCH: + * This symbol contains the name of the private library for this package. + * The library is private in the sense that it needn't be in anyone's + * execution path, but it should be accessible by the world. The program + * should be prepared to do ~ expansion. + * The standard distribution will put nothing in this directory. + * After perl has been installed, users may install their own local + * architecture-dependent modules in this directory with + * MakeMaker Makefile.PL + * or equivalent. See INSTALL for details. */ -#$d_sfio USE_SFIO /**/ - -/* HAS_SQRTL: - * This symbol, if defined, indicates that the sqrtl routine is - * available to do long double square roots. +/* SITEARCH_EXP: + * This symbol contains the ~name expanded version of SITEARCH, to be used + * in programs that are not prepared to deal with ~ expansion at run-time. */ -#$d_sqrtl HAS_SQRTL /**/ +#define SITEARCH "$sitearch" /**/ +#define SITEARCH_EXP "$sitearchexp" /**/ -/* HAS_STATFS: - * This symbol, if defined, indicates that the statfs routine is - * available to stat filesystems by filenames. - */ -/* HAS_STRUCT_STATFS: - * This symbol, if defined, indicates that the struct statfs - * to do statfs() is supported. - */ -/* HAS_STRUCT_FS_DATA: - * This symbol, if defined, indicates that the struct fs_data - * to do statfs() is supported. +/* SITELIB: + * This symbol contains the name of the private library for this package. + * The library is private in the sense that it needn't be in anyone's + * execution path, but it should be accessible by the world. The program + * should be prepared to do ~ expansion. + * The standard distribution will put nothing in this directory. + * After perl has been installed, users may install their own local + * architecture-independent modules in this directory with + * MakeMaker Makefile.PL + * or equivalent. See INSTALL for details. */ -/* HAS_STRUCT_STATFS_F_FLAGS: - * This symbol, if defined, indicates that the struct statfs - * does have the f_flags member containing the mount flags of - * the filesystem containing the file. - * This kind of struct statfs is coming from (BSD 4.3), - * not from (SYSV). Older BSDs (like Ultrix) do not - * have statfs() and struct statfs, they have ustat() and statfs() - * with struct fs_data. +/* SITELIB_EXP: + * This symbol contains the ~name expanded version of SITELIB, to be used + * in programs that are not prepared to deal with ~ expansion at run-time. */ -#$d_statfs HAS_STATFS /**/ -#$d_statfs_s HAS_STRUCT_STATFS /**/ -#$d_fs_data_s HAS_STRUCT_FS_DATA /**/ -#$d_statfs_f_flags HAS_STRUCT_STATFS_F_FLAGS /**/ - -/* HAS_FSTATVFS: - * This symbol, if defined, indicates that the fstatvfs routine is - * available to stat filesystems by file descriptors. +/* SITELIB_STEM: + * This define is SITELIB_EXP with any trailing version-specific component + * removed. The elements in inc_version_list (inc_version_list.U) can + * be tacked onto this variable to generate a list of directories to search. */ -#$d_fstatvfs HAS_FSTATVFS /**/ +#define SITELIB "$sitelib" /**/ +#define SITELIB_EXP "$sitelibexp" /**/ +#define SITELIB_STEM "$sitelib_stem" /**/ -/* HAS_TELLDIR_PROTO: - * This symbol, if defined, indicates that the system provides - * a prototype for the telldir() function. Otherwise, it is up - * to the program to supply one. A good guess is - * extern long telldir _((DIR*)); +/* Size_t_size: + * This symbol holds the size of a Size_t in bytes. */ -#$d_telldirproto HAS_TELLDIR_PROTO /**/ +#define Size_t_size $sizesize /* */ -/* HAS_USTAT: - * This symbol, if defined, indicates that the ustat system call is - * available to query file system statistics by dev_t. +/* Size_t: + * This symbol holds the type used to declare length parameters + * for string functions. It is usually size_t, but may be + * unsigned long, int, etc. It may be necessary to include + * to get any typedef'ed information. */ -#$d_ustat HAS_USTAT /**/ +#define Size_t $sizetype /* length paramater for string functions */ -/* HAS_WRITEV: - * This symbol, if defined, indicates that the writev routine is - * available to do scatter writes. +/* Sock_size_t: + * This symbol holds the type used for the size argument of + * various socket calls (just the base type, not the pointer-to). */ -#$d_writev HAS_WRITEV /**/ +#define Sock_size_t $socksizetype /**/ -/* USE_DYNAMIC_LOADING: - * This symbol, if defined, indicates that dynamic loading of - * some sort is available. +/* SSize_t: + * This symbol holds the type used by functions that return + * a count of bytes or an error condition. It must be a signed type. + * It is usually ssize_t, but may be long or int, etc. + * It may be necessary to include or + * to get any typedef'ed information. + * We will pick a type such that sizeof(SSize_t) == sizeof(Size_t). */ -#$usedl USE_DYNAMIC_LOADING /**/ +#define SSize_t $ssizetype /* signed count of bytes */ -/* FFLUSH_NULL: - * This symbol, if defined, tells that fflush(NULL) does flush - * all pending stdio output. - */ -/* FFLUSH_ALL: - * This symbol, if defined, tells that to flush - * all pending stdio output one must loop through all - * the stdio file handles stored in an array and fflush them. - * Note that if fflushNULL is defined, fflushall will not - * even be probed for and will be left undefined. +/* STARTPERL: + * This variable contains the string to put in front of a perl + * script to make sure (one hopes) that it runs with perl and not + * some shell. */ -#$fflushNULL FFLUSH_NULL /**/ -#$fflushall FFLUSH_ALL /**/ +#define STARTPERL "$startperl" /**/ -/* DB_Prefix_t: - * This symbol contains the type of the prefix structure element - * in the header file. In older versions of DB, it was - * int, while in newer ones it is u_int32_t. - */ -/* DB_Hash_t: - * This symbol contains the type of the prefix structure element - * in the header file. In older versions of DB, it was - * int, while in newer ones it is size_t. +/* STDCHAR: + * This symbol is defined to be the type of char used in stdio.h. + * It has the values "unsigned char" or "char". */ -#define DB_Hash_t $db_hashtype /**/ -#define DB_Prefix_t $db_prefixtype /**/ +#define STDCHAR $stdchar /**/ -/* I_INTTYPES: - * This symbol, if defined, indicates to the C program that it should - * include . +/* HAS_STDIO_STREAM_ARRAY: + * This symbol, if defined, tells that there is an array + * holding the stdio streams. */ -/* HAS_INT64_T: - * This symbol will defined if the C compiler supports int64_t. - * Usually the needs to be included, but sometimes - * is enough. +/* STDIO_STREAM_ARRAY: + * This symbol tells the name of the array holding the stdio streams. + * Usual values include _iob, __iob, and __sF. */ -#$i_inttypes I_INTTYPES /**/ -#$d_int64t HAS_INT64_T /**/ +#$d_stdio_stream_array HAS_STDIO_STREAM_ARRAY /**/ +#define STDIO_STREAM_ARRAY $stdio_stream_array -/* I_MNTENT: - * This symbol, if defined, indicates that exists and - * should be included. +/* Uid_t_f: + * This symbol defines the format string used for printing a Uid_t. */ -#$i_mntent I_MNTENT /**/ +#define Uid_t_f $uidformat /**/ -/* I_NETINET_TCP: - * This symbol, if defined, indicates to the C program that it should - * include . +/* Uid_t_sign: + * This symbol holds the signedess of a Uid_t. + * 1 for unsigned, -1 for signed. */ -#$i_netinettcp I_NETINET_TCP /**/ +#define Uid_t_sign $uidsign /* UID sign */ -/* I_POLL: - * This symbol, if defined, indicates that exists and - * should be included. +/* Uid_t_size: + * This symbol holds the size of a Uid_t in bytes. */ -#$i_poll I_POLL /**/ +#define Uid_t_size $uidsize /* UID size */ -/* I_SHADOW: - * This symbol, if defined, indicates that exists and - * should be included. +/* Uid_t: + * This symbol holds the type used to declare user ids in the kernel. + * It can be int, ushort, uid_t, etc... It may be necessary to include + * to get any typedef'ed information. */ -#$i_shadow I_SHADOW /**/ +#define Uid_t $uidtype /* UID type */ -/* I_SOCKS: - * This symbol, if defined, indicates that exists and - * should be included. +/* USE_64_BIT_INT: + * This symbol, if defined, indicates that 64-bit integers should + * be used when available. If not defined, the native integers + * will be employed (be they 32 or 64 bits). The minimal possible + * 64-bitness is used, just enough to get 64-bit integers into Perl. + * This may mean using for example "long longs", while your memory + * may still be limited to 2 gigabytes. + */ +/* USE_64_BIT_ALL: + * This symbol, if defined, indicates that 64-bit integers should + * be used when available. If not defined, the native integers + * will be used (be they 32 or 64 bits). The maximal possible + * 64-bitness is employed: LP64 or ILP64, meaning that you will + * be able to use more than 2 gigabytes of memory. This mode is + * even more binary incompatible than USE_64_BIT_INT. You may not + * be able to run the resulting executable in a 32-bit CPU at all or + * you may need at least to reboot your OS to 64-bit mode. + */ +#ifndef USE_64_BIT_INT +#$use64bitint USE_64_BIT_INT /**/ +#endif + +#ifndef USE_64_BIT_ALL +#$use64bitall USE_64_BIT_ALL /**/ +#endif + +/* USE_LARGE_FILES: + * This symbol, if defined, indicates that large file support + * should be used when available. */ -#$i_socks I_SOCKS /**/ +#ifndef USE_LARGE_FILES +#$uselargefiles USE_LARGE_FILES /**/ +#endif -/* I_SYS_MMAN: - * This symbol, if defined, indicates that exists and - * should be included. +/* USE_LONG_DOUBLE: + * This symbol, if defined, indicates that long doubles should + * be used when available. */ -#$i_sysmman I_SYS_MMAN /**/ +#ifndef USE_LONG_DOUBLE +#$uselongdouble USE_LONG_DOUBLE /**/ +#endif -/* I_SYS_MOUNT: - * This symbol, if defined, indicates that exists and - * should be included. +/* USE_MORE_BITS: + * This symbol, if defined, indicates that 64-bit interfaces and + * long doubles should be used when available. */ -#$i_sysmount I_SYS_MOUNT /**/ +#ifndef USE_MORE_BITS +#$usemorebits USE_MORE_BITS /**/ +#endif -/* I_SYS_STATFS: - * This symbol, if defined, indicates that exists. +/* MULTIPLICITY: + * This symbol, if defined, indicates that Perl should + * be built to use multiplicity. */ -#$i_sysstatfs I_SYS_STATFS /**/ +#ifndef MULTIPLICITY +#$usemultiplicity MULTIPLICITY /**/ +#endif -/* I_SYS_STATVFS: - * This symbol, if defined, indicates that exists and - * should be included. +/* USE_PERLIO: + * This symbol, if defined, indicates that the PerlIO abstraction should + * be used throughout. If not defined, stdio should be + * used in a fully backward compatible manner. */ -#$i_sysstatvfs I_SYS_STATVFS /**/ +#ifndef USE_PERLIO +#$useperlio USE_PERLIO /**/ +#endif -/* I_SYS_VFS: - * This symbol, if defined, indicates that exists and - * should be included. +/* USE_SOCKS: + * This symbol, if defined, indicates that Perl should + * be built to use socks. */ -#$i_sysvfs I_SYS_VFS /**/ +#ifndef USE_SOCKS +#$usesocks USE_SOCKS /**/ +#endif -/* I_USTAT: - * This symbol, if defined, indicates that exists and - * should be included. +/* USE_ITHREADS: + * This symbol, if defined, indicates that Perl should be built to + * use the interpreter-based threading implementation. */ -#$i_ustat I_USTAT /**/ +/* USE_5005THREADS: + * This symbol, if defined, indicates that Perl should be built to + * use the 5.005-based threading implementation. + */ +/* OLD_PTHREADS_API: + * This symbol, if defined, indicates that Perl should + * be built to use the old draft POSIX threads API. + */ +/* USE_REENTRANT_API: + * This symbol, if defined, indicates that Perl should + * try to use the various _r versions of library functions. + * This is extremely experimental. + */ +#$use5005threads USE_5005THREADS /**/ +#$useithreads USE_ITHREADS /**/ +#if defined(USE_5005THREADS) && !defined(USE_ITHREADS) +#define USE_THREADS /* until src is revised*/ +#endif +#$d_oldpthreads OLD_PTHREADS_API /**/ +#$usereentrant USE_REENTRANT_API /**/ -/* HAS_OFF64_T: - * This symbol will be defined if the C compiler supports off64_t. +/* PERL_VENDORARCH: + * If defined, this symbol contains the name of a private library. + * The library is private in the sense that it needn't be in anyone's + * execution path, but it should be accessible by the world. + * It may have a ~ on the front. + * The standard distribution will put nothing in this directory. + * Vendors who distribute perl may wish to place their own + * architecture-dependent modules and extensions in this directory with + * MakeMaker Makefile.PL INSTALLDIRS=vendor + * or equivalent. See INSTALL for details. */ -/* HAS_FPOS64_T: - * This symbol will be defined if the C compiler supports fpos64_t. +/* PERL_VENDORARCH_EXP: + * This symbol contains the ~name expanded version of PERL_VENDORARCH, to be used + * in programs that are not prepared to deal with ~ expansion at run-time. */ -#$d_off64_t HAS_OFF64_T /**/ -#$d_fpos64_t HAS_FPOS64_T /**/ +#$d_vendorarch PERL_VENDORARCH "$vendorarch" /**/ +#$d_vendorarch PERL_VENDORARCH_EXP "$vendorarchexp" /**/ -/* PERL_PRIfldbl: - * This symbol, if defined, contains the string used by stdio to - * format long doubles (format 'f') for output. +/* PERL_VENDORLIB_EXP: + * This symbol contains the ~name expanded version of VENDORLIB, to be used + * in programs that are not prepared to deal with ~ expansion at run-time. */ -/* PERL_PRIgldbl: - * This symbol, if defined, contains the string used by stdio to - * format long doubles (format 'g') for output. +/* PERL_VENDORLIB_STEM: + * This define is PERL_VENDORLIB_EXP with any trailing version-specific component + * removed. The elements in inc_version_list (inc_version_list.U) can + * be tacked onto this variable to generate a list of directories to search. */ -#$d_PRIfldbl PERL_PRIfldbl $sPRIfldbl /**/ -#$d_PRIgldbl PERL_PRIgldbl $sPRIgldbl /**/ +#$d_vendorlib PERL_VENDORLIB_EXP "$vendorlibexp" /**/ +#$d_vendorlib PERL_VENDORLIB_STEM "$vendorlib_stem" /**/ -/* PERL_PRId64: - * This symbol, if defined, contains the string used by stdio to - * format 64-bit decimal numbers (format 'd') for output. +/* VOIDFLAGS: + * This symbol indicates how much support of the void type is given by this + * compiler. What various bits mean: + * + * 1 = supports declaration of void + * 2 = supports arrays of pointers to functions returning void + * 4 = supports comparisons between pointers to void functions and + * addresses of void functions + * 8 = suports declaration of generic void pointers + * + * The package designer should define VOIDUSED to indicate the requirements + * of the package. This can be done either by #defining VOIDUSED before + * including config.h, or by defining defvoidused in Myinit.U. If the + * latter approach is taken, only those flags will be tested. If the + * level of void support necessary is not present, defines void to int. */ -/* PERL_PRIu64: - * This symbol, if defined, contains the string used by stdio to - * format 64-bit unsigned decimal numbers (format 'u') for output. +#ifndef VOIDUSED +#define VOIDUSED $defvoidused +#endif +#define VOIDFLAGS $voidflags +#if (VOIDFLAGS & VOIDUSED) != VOIDUSED +#define void int /* is void to be avoided? */ +#define M_VOID /* Xenix strikes again */ +#endif + +/* HASATTRIBUTE_FORMAT: + * Can we handle GCC attribute for checking printf-style formats */ -/* PERL_PRIo64: - * This symbol, if defined, contains the string used by stdio to - * format 64-bit octal numbers (format 'o') for output. +/* HASATTRIBUTE_MALLOC: + * Can we handle GCC attribute for malloc-style functions. */ -/* PERL_PRIx64: - * This symbol, if defined, contains the string used by stdio to - * format 64-bit hexadecimal numbers (format 'x') for output. +/* HASATTRIBUTE_NONNULL: + * Can we handle GCC attribute for nonnull function parms. + */ +/* HASATTRIBUTE_NORETURN: + * Can we handle GCC attribute for functions that do not return + */ +/* HASATTRIBUTE_PURE: + * Can we handle GCC attribute for pure functions */ -#$d_PRId64 PERL_PRId64 $sPRId64 /**/ -#$d_PRIu64 PERL_PRIu64 $sPRIu64 /**/ -#$d_PRIo64 PERL_PRIo64 $sPRIo64 /**/ -#$d_PRIx64 PERL_PRIx64 $sPRIx64 /**/ +/* HASATTRIBUTE_UNUSED: + * Can we handle GCC attribute for unused variables and arguments + */ +/* HASATTRIBUTE_WARN_UNUSED_RESULT: + * Can we handle GCC attribute for warning on unused results + */ +#$d_attribute_format HASATTRIBUTE_FORMAT /**/ +#$d_attribute_noreturn HASATTRIBUTE_NORETURN /**/ +#$d_attribute_malloc HASATTRIBUTE_MALLOC /**/ +#$d_attribute_nonnull HASATTRIBUTE_NONNULL /**/ +#$d_attribute_pure HASATTRIBUTE_PURE /**/ +#$d_attribute_unused HASATTRIBUTE_UNUSED /**/ +#$d_attribute_warn_unused_result HASATTRIBUTE_WARN_UNUSED_RESULT /**/ -/* SELECT_MIN_BITS: - * This symbol holds the minimum number of bits operated by select. - * That is, if you do select(n, ...), how many bits at least will be - * cleared in the masks if some activity is detected. Usually this - * is either n or 32*ceil(n/32), especially many little-endians do - * the latter. This is only useful if you have select(), naturally. +/* HAS_CRYPT: + * This symbol, if defined, indicates that the crypt routine is available + * to encrypt passwords and the like. */ -#define SELECT_MIN_BITS $selectminbits /**/ +#$d_crypt HAS_CRYPT /**/ -/* STARTPERL: - * This variable contains the string to put in front of a perl - * script to make sure (one hopes) that it runs with perl and not - * some shell. +/* SETUID_SCRIPTS_ARE_SECURE_NOW: + * This symbol, if defined, indicates that the bug that prevents + * setuid scripts from being secure is not present in this kernel. + */ +/* DOSUID: + * This symbol, if defined, indicates that the C program should + * check the script that it is executing for setuid/setgid bits, and + * attempt to emulate setuid/setgid on systems that have disabled + * setuid #! scripts because the kernel can't do it securely. + * It is up to the package designer to make sure that this emulation + * is done securely. Among other things, it should do an fstat on + * the script it just opened to make sure it really is a setuid/setgid + * script, it should make sure the arguments passed correspond exactly + * to the argument on the #! line, and it should not trust any + * subprocesses to which it must pass the filename rather than the + * file descriptor of the script to be executed. */ -#define STARTPERL "$startperl" /**/ +#$d_suidsafe SETUID_SCRIPTS_ARE_SECURE_NOW /**/ +#$d_dosuid DOSUID /**/ -/* HAS_STDIO_STREAM_ARRAY: - * This symbol, if defined, tells that there is an array - * holding the stdio streams. +/* Shmat_t: + * This symbol holds the return type of the shmat() system call. + * Usually set to 'void *' or 'char *'. */ -/* STDIO_STREAM_ARRAY: - * This symbol tells the name of the array holding the stdio streams. - * Usual values include _iob, __iob, and __sF. +/* HAS_SHMAT_PROTOTYPE: + * This symbol, if defined, indicates that the sys/shm.h includes + * a prototype for shmat(). Otherwise, it is up to the program to + * guess one. Shmat_t shmat(int, Shmat_t, int) is a good guess, + * but not always right so it should be emitted by the program only + * when HAS_SHMAT_PROTOTYPE is not defined to avoid conflicting defs. */ -#$d_stdio_stream_array HAS_STDIO_STREAM_ARRAY /**/ -#define STDIO_STREAM_ARRAY $stdio_stream_array +#define Shmat_t $shmattype /**/ +#$d_shmatprototype HAS_SHMAT_PROTOTYPE /**/ -/* HAS_STRTOULL: - * This symbol, if defined, indicates that the strtoull routine is - * available to convert strings into unsigned long longs. +/* I_NDBM: + * This symbol, if defined, indicates that exists and should + * be included. */ -#$d_strtoull HAS_STRTOULL /**/ +#$i_ndbm I_NDBM /**/ -/* USE_64_BITS: - * This symbol, if defined, indicates that 64-bit interfaces should - * be used when available. If not defined, the native default interfaces - * will be used (be they 32 or 64 bits). +/* I_STDARG: + * This symbol, if defined, indicates that exists and should + * be included. */ -#$use64bits USE_64_BITS /**/ - -/* USE_LARGE_FILES: - * This symbol, if defined, indicates that large file support - * should be used when available. The USE_64_BITS symbol will - * also be turned on if necessary. +/* I_VARARGS: + * This symbol, if defined, indicates to the C program that it should + * include . */ -#$uselargefiles USE_LARGE_FILES /**/ +#$i_stdarg I_STDARG /**/ +#$i_varargs I_VARARGS /**/ -/* USE_LONG_DOUBLE: - * This symbol, if defined, indicates that long doubles should - * be used when available. +/* CAN_PROTOTYPE: + * If defined, this macro indicates that the C compiler can handle + * function prototypes. */ -#$uselongdouble USE_LONG_DOUBLE /**/ +/* _: + * This macro is used to declare function parameters for folks who want + * to make declarations with prototypes using a different style than + * the above macros. Use double parentheses. For example: + * + * int main _((int argc, char *argv[])); + */ +#$prototype CAN_PROTOTYPE /**/ +#ifdef CAN_PROTOTYPE +#define _(args) args +#else +#define _(args) () +#endif -/* MULTIPLICITY: - * This symbol, if defined, indicates that Perl should - * be built to use multiplicity. +/* SH_PATH: + * This symbol contains the full pathname to the shell used on this + * on this system to execute Bourne shell scripts. Usually, this will be + * /bin/sh, though it's possible that some systems will have /bin/ksh, + * /bin/pdksh, /bin/ash, /bin/bash, or even something such as + * D:/bin/sh.exe. */ -#$usemultiplicity MULTIPLICITY /**/ +#define SH_PATH "$sh" /**/ -/* USE_PERLIO: - * This symbol, if defined, indicates that the PerlIO abstraction should - * be used throughout. If not defined, stdio should be - * used in a fully backward compatible manner. +/* HAS_AINTL: + * This symbol, if defined, indicates that the aintl routine is + * available. If copysignl is also present we can emulate modfl. */ -#$useperlio USE_PERLIO /**/ +#$d_aintl HAS_AINTL /**/ -/* USE_SOCKS: - * This symbol, if defined, indicates that Perl should - * be built to use socks. +/* HAS_CLEARENV: + * This symbol, if defined, indicates that the clearenv () routine is + * available for use. */ -#$usesocks USE_SOCKS /**/ +#$d_clearenv HAS_CLEARENV /**/ -/* PERL_XS_APIVERSION: - * This variable contains the version of the oldest perl binary - * compatible with the present perl. perl.c:incpush() and - * lib/lib.pm will automatically search in $sitearch for older - * directories across major versions back to xs_apiversion. - * This is only useful if you have a perl library directory tree - * structured like the default one. - * See INSTALL for how this works. - * The versioned site_perl directory was introduced in 5.005, - * so that is the lowest possible value. - * Since this can depend on compile time options (such as - * bincompat) it is set by Configure. Other non-default sources - * of potential incompatibility, such as multiplicity, threads, - * debugging, 64bits, sfio, etc., are not checked for currently, - * though in principle we could go snooping around in old - * Config.pm files. - */ -/* PERL_PM_APIVERSION: - * This variable contains the version of the oldest perl - * compatible with the present perl. (That is, pure perl modules - * written for pm_apiversion will still work for the current - * version). perl.c:incpush() and lib/lib.pm will automatically - * search in $sitelib for older directories across major versions - * back to pm_apiversion. This is only useful if you have a perl - * library directory tree structured like the default one. The - * versioned site_perl library was introduced in 5.005, so that's - * the default setting for this variable. It's hard to imagine - * it changing before Perl6. It is included here for symmetry - * with xs_apiveprsion -- the searching algorithms will - * (presumably) be similar. - * See the INSTALL file for how this works. - */ -#define PERL_XS_APIVERSION $xs_apiversion /* Change to string for tuples?*/ -#define PERL_PM_APIVERSION $pm_apiversion /* Change to string for tuples?*/ +/* HAS_COPYSIGNL: + * This symbol, if defined, indicates that the copysignl routine is + * available. If aintl is also present we can emulate modfl. + */ +#$d_copysignl HAS_COPYSIGNL /**/ -/* HAS_DRAND48_PROTO: +/* HAS_DBMINIT_PROTO: * This symbol, if defined, indicates that the system provides - * a prototype for the drand48() function. Otherwise, it is up + * a prototype for the dbminit() function. Otherwise, it is up * to the program to supply one. A good guess is - * extern double drand48 _((void)); + * extern int dbminit(char *); */ -#$d_drand48proto HAS_DRAND48_PROTO /**/ +#$d_dbminitproto HAS_DBMINIT_PROTO /**/ -/* HAS_GETHOST_PROTOS: - * This symbol, if defined, indicates that includes - * prototypes for gethostent(), gethostbyname(), and - * gethostbyaddr(). Otherwise, it is up to the program to guess - * them. See netdbtype.U for probing for various Netdb_xxx_t types. +/* HAS_DIRFD: + * This manifest constant lets the C program know that dirfd + * is available. */ -#$d_gethostprotos HAS_GETHOST_PROTOS /**/ +#$d_dirfd HAS_DIRFD /**/ -/* HAS_GETNET_PROTOS: - * This symbol, if defined, indicates that includes - * prototypes for getnetent(), getnetbyname(), and - * getnetbyaddr(). Otherwise, it is up to the program to guess - * them. See netdbtype.U for probing for various Netdb_xxx_t types. +/* HAS_FAST_STDIO: + * This symbol, if defined, indicates that the "fast stdio" + * is available to manipulate the stdio buffers directly. */ -#$d_getnetprotos HAS_GETNET_PROTOS /**/ +#$d_faststdio HAS_FAST_STDIO /**/ -/* HAS_GETPROTO_PROTOS: - * This symbol, if defined, indicates that includes - * prototypes for getprotoent(), getprotobyname(), and - * getprotobyaddr(). Otherwise, it is up to the program to guess - * them. See netdbtype.U for probing for various Netdb_xxx_t types. +/* HAS_FLOCK_PROTO: + * This symbol, if defined, indicates that the system provides + * a prototype for the flock() function. Otherwise, it is up + * to the program to supply one. A good guess is + * extern int flock(int, int); */ -#$d_getprotoprotos HAS_GETPROTO_PROTOS /**/ +#$d_flockproto HAS_FLOCK_PROTO /**/ -/* HAS_GETSERV_PROTOS: - * This symbol, if defined, indicates that includes - * prototypes for getservent(), getservbyname(), and - * getservbyaddr(). Otherwise, it is up to the program to guess - * them. See netdbtype.U for probing for various Netdb_xxx_t types. - */ -#$d_getservprotos HAS_GETSERV_PROTOS /**/ +/* HAS_FPCLASSL: + * This symbol, if defined, indicates that the fpclassl routine is + * available to classify long doubles. Available for example in IRIX. + * The returned values are defined in and are: + * + * FP_SNAN signaling NaN + * FP_QNAN quiet NaN + * FP_NINF negative infinity + * FP_PINF positive infinity + * FP_NDENORM negative denormalized non-zero + * FP_PDENORM positive denormalized non-zero + * FP_NZERO negative zero + * FP_PZERO positive zero + * FP_NNORM negative normalized non-zero + * FP_PNORM positive normalized non-zero + */ +#$d_fpclassl HAS_FPCLASSL /**/ + +/* HAS_ILOGBL: + * This symbol, if defined, indicates that the ilogbl routine is + * available. If scalbnl is also present we can emulate frexpl. + */ +#$d_ilogbl HAS_ILOGBL /**/ + +/* LIBM_LIB_VERSION: + * This symbol, if defined, indicates that libm exports _LIB_VERSION + * and that math.h defines the enum to manipulate it. + */ +#$d_libm_lib_version LIBM_LIB_VERSION /**/ + +/* HAS_NL_LANGINFO: + * This symbol, if defined, indicates that the nl_langinfo routine is + * available to return local data. You will also need + * and therefore I_LANGINFO. + */ +#$d_nl_langinfo HAS_NL_LANGINFO /**/ + +/* HAS_PROCSELFEXE: + * This symbol is defined if PROCSELFEXE_PATH is a symlink + * to the absolute pathname of the executing program. + */ +/* PROCSELFEXE_PATH: + * If HAS_PROCSELFEXE is defined this symbol is the filename + * of the symbolic link pointing to the absolute pathname of + * the executing program. + */ +#$d_procselfexe HAS_PROCSELFEXE /**/ +#if defined(HAS_PROCSELFEXE) && !defined(PROCSELFEXE_PATH) +#define PROCSELFEXE_PATH $procselfexe /**/ +#endif -/* Netdb_host_t: - * This symbol holds the type used for the 1st argument - * to gethostbyaddr(). - */ -/* Netdb_hlen_t: - * This symbol holds the type used for the 2nd argument - * to gethostbyaddr(). - */ -/* Netdb_name_t: - * This symbol holds the type used for the argument to - * gethostbyname(). - */ -/* Netdb_net_t: - * This symbol holds the type used for the 1st argument to - * getnetbyaddr(). +/* HAS_PTHREAD_ATTR_SETSCOPE: + * This symbol, if defined, indicates that the pthread_attr_setscope + * system call is available to set the contention scope attribute of + * a thread attribute object. */ -#define Netdb_host_t $netdb_host_type /**/ -#define Netdb_hlen_t $netdb_hlen_type /**/ -#define Netdb_name_t $netdb_name_type /**/ -#define Netdb_net_t $netdb_net_type /**/ +#$d_pthread_attr_setscope HAS_PTHREAD_ATTR_SETSCOPE /**/ -/* Select_fd_set_t: - * This symbol holds the type used for the 2nd, 3rd, and 4th - * arguments to select. Usually, this is 'fd_set *', if HAS_FD_SET - * is defined, and 'int *' otherwise. This is only useful if you - * have select(), of course. +/* HAS_SCALBNL: + * This symbol, if defined, indicates that the scalbnl routine is + * available. If ilogbl is also present we can emulate frexpl. */ -#define Select_fd_set_t $selecttype /**/ +#$d_scalbnl HAS_SCALBNL /**/ -/* ARCHNAME: - * This symbol holds a string representing the architecture name. - * It may be used to construct an architecture-dependant pathname - * where library files may be held under a private library, for - * instance. +/* HAS_SIGPROCMASK: + * This symbol, if defined, indicates that the sigprocmask + * system call is available to examine or change the signal mask + * of the calling process. */ -#define ARCHNAME "$archname" /**/ +#$d_sigprocmask HAS_SIGPROCMASK /**/ -/* OLD_PTHREAD_CREATE_JOINABLE: - * This symbol, if defined, indicates how to create pthread - * in joinable (aka undetached) state. NOTE: not defined - * if pthread.h already has defined PTHREAD_CREATE_JOINABLE - * (the new version of the constant). - * If defined, known values are PTHREAD_CREATE_UNDETACHED - * and __UNDETACHED. +/* HAS_SOCKATMARK: + * This symbol, if defined, indicates that the sockatmark routine is + * available to test whether a socket is at the out-of-band mark. */ -#$d_old_pthread_create_joinable OLD_PTHREAD_CREATE_JOINABLE $old_pthread_create_joinable /**/ +#$d_sockatmark HAS_SOCKATMARK /**/ -/* HAS_PTHREAD_YIELD: - * This symbol, if defined, indicates that the pthread_yield - * routine is available to yield the execution of the current - * thread. sched_yield is preferable to pthread_yield. - */ -/* SCHED_YIELD: - * This symbol defines the way to yield the execution of - * the current thread. Known ways are sched_yield, - * pthread_yield, and pthread_yield with NULL. - */ -/* HAS_SCHED_YIELD: - * This symbol, if defined, indicates that the sched_yield - * routine is available to yield the execution of the current - * thread. sched_yield is preferable to pthread_yield. +/* HAS_SOCKATMARK_PROTO: + * This symbol, if defined, indicates that the system provides + * a prototype for the sockatmark() function. Otherwise, it is up + * to the program to supply one. A good guess is + * extern int sockatmark(int); */ -#$d_pthread_yield HAS_PTHREAD_YIELD /**/ -#define SCHED_YIELD $sched_yield /**/ -#$d_sched_yield HAS_SCHED_YIELD /**/ +#$d_sockatmarkproto HAS_SOCKATMARK_PROTO /**/ -/* I_MACH_CTHREADS: - * This symbol, if defined, indicates to the C program that it should - * include . +/* SPRINTF_RETURNS_STRLEN: + * This variable defines whether sprintf returns the length of the string + * (as per the ANSI spec). Some C libraries retain compatibility with + * pre-ANSI C and return a pointer to the passed in buffer; for these + * this variable will be undef. */ -#$i_machcthr I_MACH_CTHREADS /**/ +#$d_sprintf_returns_strlen SPRINTF_RETURNS_STRLEN /**/ -/* I_PTHREAD: - * This symbol, if defined, indicates to the C program that it should - * include . +/* HAS_SETRESGID_PROTO: + * This symbol, if defined, indicates that the system provides + * a prototype for the setresgid() function. Otherwise, it is up + * to the program to supply one. Good guesses are + * extern int setresgid(uid_t ruid, uid_t euid, uid_t suid); */ -#$i_pthread I_PTHREAD /**/ +#$d_sresgproto HAS_SETRESGID_PROTO /**/ -/* USE_THREADS: - * This symbol, if defined, indicates that Perl should - * be built to use threads. - */ -/* OLD_PTHREADS_API: - * This symbol, if defined, indicates that Perl should - * be built to use the old draft POSIX threads API. +/* HAS_SETRESUID_PROTO: + * This symbol, if defined, indicates that the system provides + * a prototype for the setresuid() function. Otherwise, it is up + * to the program to supply one. Good guesses are + * extern int setresuid(uid_t ruid, uid_t euid, uid_t suid); */ -#$usethreads USE_THREADS /**/ -#$d_oldpthreads OLD_PTHREADS_API /**/ +#$d_sresuproto HAS_SETRESUID_PROTO /**/ -/* Time_t: - * This symbol holds the type returned by time(). It can be long, - * or time_t on BSD sites (in which case should be - * included). +/* HAS_STRFTIME: + * This symbol, if defined, indicates that the strftime routine is + * available to do time formatting. */ -#define Time_t $timetype /* Time type */ +#$d_strftime HAS_STRFTIME /**/ -/* HAS_TIMES: - * This symbol, if defined, indicates that the times() routine exists. - * Note that this became obsolete on some systems (SUNOS), which now - * use getrusage(). It may be necessary to include . +/* HAS_STRLCAT: + * This symbol, if defined, indicates that the strlcat () routine is + * available to do string concatenation. */ -#$d_times HAS_TIMES /**/ +#$d_strlcat HAS_STRLCAT /**/ -/* Fpos_t: - * This symbol holds the type used to declare file positions in libc. - * It can be fpos_t, long, uint, etc... It may be necessary to include - * to get any typedef'ed information. +/* HAS_STRLCPY: + * This symbol, if defined, indicates that the strlcpy () routine is + * available to do string copying. */ -#define Fpos_t $fpostype /* File position type */ +#$d_strlcpy HAS_STRLCPY /**/ -/* Gid_t: - * This symbol holds the return type of getgid() and the type of - * argument to setrgid() and related functions. Typically, - * it is the type of group ids in the kernel. It can be int, ushort, - * uid_t, etc... It may be necessary to include to get - * any typedef'ed information. +/* HAS_SYSCALL_PROTO: + * This symbol, if defined, indicates that the system provides + * a prototype for the syscall() function. Otherwise, it is up + * to the program to supply one. Good guesses are + * extern int syscall(int, ...); + * extern int syscall(long, ...); */ -#define Gid_t $gidtype /* Type for getgid(), etc... */ +#$d_syscallproto HAS_SYSCALL_PROTO /**/ -/* Off_t: - * This symbol holds the type used to declare offsets in the kernel. - * It can be int, long, off_t, etc... It may be necessary to include - * to get any typedef'ed information. +/* U32_ALIGNMENT_REQUIRED: + * This symbol, if defined, indicates that you must access + * character data through U32-aligned pointers. */ -/* LSEEKSIZE: - * This symbol holds the number of bytes used by the Off_t. +#ifndef U32_ALIGNMENT_REQUIRED +#$d_u32align U32_ALIGNMENT_REQUIRED /**/ +#endif + +/* HAS_USLEEP_PROTO: + * This symbol, if defined, indicates that the system provides + * a prototype for the usleep() function. Otherwise, it is up + * to the program to supply one. A good guess is + * extern int usleep(useconds_t); */ -#define Off_t $lseektype /* type */ -#define LSEEKSIZE $lseeksize /* size */ +#$d_usleepproto HAS_USLEEP_PROTO /**/ -/* Mode_t: - * This symbol holds the type used to declare file modes - * for systems calls. It is usually mode_t, but may be - * int or unsigned short. It may be necessary to include - * to get any typedef'ed information. +/* I_CRYPT: + * This symbol, if defined, indicates that exists and + * should be included. */ -#define Mode_t $modetype /* file mode parameter for system calls */ +#$i_crypt I_CRYPT /**/ -/* Pid_t: - * This symbol holds the type used to declare process ids in the kernel. - * It can be int, uint, pid_t, etc... It may be necessary to include - * to get any typedef'ed information. +/* I_FP: + * This symbol, if defined, indicates that exists and + * should be included. */ -#define Pid_t $pidtype /* PID type */ +#$i_fp I_FP /**/ -/* Size_t: - * This symbol holds the type used to declare length parameters - * for string functions. It is usually size_t, but may be - * unsigned long, int, etc. It may be necessary to include - * to get any typedef'ed information. +/* I_LANGINFO: + * This symbol, if defined, indicates that exists and + * should be included. */ -#define Size_t $sizetype /* length paramater for string functions */ +#$i_langinfo I_LANGINFO /**/ -/* Uid_t_SIGN: - * This symbol holds the signedess of a Uid_t. - * 1 for unsigned, -1 for signed. +/* USE_FAST_STDIO: + * This symbol, if defined, indicates that Perl should + * be built to use 'fast stdio'. + * Defaults to define in Perls 5.8 and earlier, to undef later. */ -#define Uid_t_SIGN $uidsign /* UID sign */ +#ifndef USE_FAST_STDIO +#$usefaststdio USE_FAST_STDIO /**/ +#endif -/* Uid_t: - * This symbol holds the type used to declare user ids in the kernel. - * It can be int, ushort, uid_t, etc... It may be necessary to include - * to get any typedef'ed information. +/* PERL_RELOCATABLE_INC: + * This symbol, if defined, indicates that we'd like to relocate entries + * in @INC at run time based on the location of the perl binary. + */ +#define PERL_RELOCATABLE_INC "$userelocatableinc" /**/ + +/* HAS_CTERMID_R: + * This symbol, if defined, indicates that the ctermid_r routine + * is available to ctermid re-entrantly. */ -#define Uid_t $uidtype /* UID type */ +/* CTERMID_R_PROTO: + * This symbol encodes the prototype of ctermid_r. + * It is zero if d_ctermid_r is undef, and one of the + * REENTRANT_PROTO_T_ABC macros of reentr.h if d_ctermid_r + * is defined. + */ +#$d_ctermid_r HAS_CTERMID_R /**/ +#define CTERMID_R_PROTO $ctermid_r_proto /**/ + +/* HAS_ENDHOSTENT_R: + * This symbol, if defined, indicates that the endhostent_r routine + * is available to endhostent re-entrantly. + */ +/* ENDHOSTENT_R_PROTO: + * This symbol encodes the prototype of endhostent_r. + * It is zero if d_endhostent_r is undef, and one of the + * REENTRANT_PROTO_T_ABC macros of reentr.h if d_endhostent_r + * is defined. + */ +#$d_endhostent_r HAS_ENDHOSTENT_R /**/ +#define ENDHOSTENT_R_PROTO $endhostent_r_proto /**/ + +/* HAS_ENDNETENT_R: + * This symbol, if defined, indicates that the endnetent_r routine + * is available to endnetent re-entrantly. + */ +/* ENDNETENT_R_PROTO: + * This symbol encodes the prototype of endnetent_r. + * It is zero if d_endnetent_r is undef, and one of the + * REENTRANT_PROTO_T_ABC macros of reentr.h if d_endnetent_r + * is defined. + */ +#$d_endnetent_r HAS_ENDNETENT_R /**/ +#define ENDNETENT_R_PROTO $endnetent_r_proto /**/ + +/* HAS_ENDPROTOENT_R: + * This symbol, if defined, indicates that the endprotoent_r routine + * is available to endprotoent re-entrantly. + */ +/* ENDPROTOENT_R_PROTO: + * This symbol encodes the prototype of endprotoent_r. + * It is zero if d_endprotoent_r is undef, and one of the + * REENTRANT_PROTO_T_ABC macros of reentr.h if d_endprotoent_r + * is defined. + */ +#$d_endprotoent_r HAS_ENDPROTOENT_R /**/ +#define ENDPROTOENT_R_PROTO $endprotoent_r_proto /**/ + +/* HAS_ENDSERVENT_R: + * This symbol, if defined, indicates that the endservent_r routine + * is available to endservent re-entrantly. + */ +/* ENDSERVENT_R_PROTO: + * This symbol encodes the prototype of endservent_r. + * It is zero if d_endservent_r is undef, and one of the + * REENTRANT_PROTO_T_ABC macros of reentr.h if d_endservent_r + * is defined. + */ +#$d_endservent_r HAS_ENDSERVENT_R /**/ +#define ENDSERVENT_R_PROTO $endservent_r_proto /**/ + +/* HAS_GETHOSTBYADDR_R: + * This symbol, if defined, indicates that the gethostbyaddr_r routine + * is available to gethostbyaddr re-entrantly. + */ +/* GETHOSTBYADDR_R_PROTO: + * This symbol encodes the prototype of gethostbyaddr_r. + * It is zero if d_gethostbyaddr_r is undef, and one of the + * REENTRANT_PROTO_T_ABC macros of reentr.h if d_gethostbyaddr_r + * is defined. + */ +#$d_gethostbyaddr_r HAS_GETHOSTBYADDR_R /**/ +#define GETHOSTBYADDR_R_PROTO $gethostbyaddr_r_proto /**/ + +/* HAS_GETHOSTBYNAME_R: + * This symbol, if defined, indicates that the gethostbyname_r routine + * is available to gethostbyname re-entrantly. + */ +/* GETHOSTBYNAME_R_PROTO: + * This symbol encodes the prototype of gethostbyname_r. + * It is zero if d_gethostbyname_r is undef, and one of the + * REENTRANT_PROTO_T_ABC macros of reentr.h if d_gethostbyname_r + * is defined. + */ +#$d_gethostbyname_r HAS_GETHOSTBYNAME_R /**/ +#define GETHOSTBYNAME_R_PROTO $gethostbyname_r_proto /**/ + +/* HAS_GETHOSTENT_R: + * This symbol, if defined, indicates that the gethostent_r routine + * is available to gethostent re-entrantly. + */ +/* GETHOSTENT_R_PROTO: + * This symbol encodes the prototype of gethostent_r. + * It is zero if d_gethostent_r is undef, and one of the + * REENTRANT_PROTO_T_ABC macros of reentr.h if d_gethostent_r + * is defined. + */ +#$d_gethostent_r HAS_GETHOSTENT_R /**/ +#define GETHOSTENT_R_PROTO $gethostent_r_proto /**/ + +/* HAS_GETNETBYADDR_R: + * This symbol, if defined, indicates that the getnetbyaddr_r routine + * is available to getnetbyaddr re-entrantly. + */ +/* GETNETBYADDR_R_PROTO: + * This symbol encodes the prototype of getnetbyaddr_r. + * It is zero if d_getnetbyaddr_r is undef, and one of the + * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getnetbyaddr_r + * is defined. + */ +#$d_getnetbyaddr_r HAS_GETNETBYADDR_R /**/ +#define GETNETBYADDR_R_PROTO $getnetbyaddr_r_proto /**/ + +/* HAS_GETNETBYNAME_R: + * This symbol, if defined, indicates that the getnetbyname_r routine + * is available to getnetbyname re-entrantly. + */ +/* GETNETBYNAME_R_PROTO: + * This symbol encodes the prototype of getnetbyname_r. + * It is zero if d_getnetbyname_r is undef, and one of the + * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getnetbyname_r + * is defined. + */ +#$d_getnetbyname_r HAS_GETNETBYNAME_R /**/ +#define GETNETBYNAME_R_PROTO $getnetbyname_r_proto /**/ + +/* HAS_GETNETENT_R: + * This symbol, if defined, indicates that the getnetent_r routine + * is available to getnetent re-entrantly. + */ +/* GETNETENT_R_PROTO: + * This symbol encodes the prototype of getnetent_r. + * It is zero if d_getnetent_r is undef, and one of the + * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getnetent_r + * is defined. + */ +#$d_getnetent_r HAS_GETNETENT_R /**/ +#define GETNETENT_R_PROTO $getnetent_r_proto /**/ + +/* HAS_GETPROTOBYNAME_R: + * This symbol, if defined, indicates that the getprotobyname_r routine + * is available to getprotobyname re-entrantly. + */ +/* GETPROTOBYNAME_R_PROTO: + * This symbol encodes the prototype of getprotobyname_r. + * It is zero if d_getprotobyname_r is undef, and one of the + * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getprotobyname_r + * is defined. + */ +#$d_getprotobyname_r HAS_GETPROTOBYNAME_R /**/ +#define GETPROTOBYNAME_R_PROTO $getprotobyname_r_proto /**/ + +/* HAS_GETPROTOBYNUMBER_R: + * This symbol, if defined, indicates that the getprotobynumber_r routine + * is available to getprotobynumber re-entrantly. + */ +/* GETPROTOBYNUMBER_R_PROTO: + * This symbol encodes the prototype of getprotobynumber_r. + * It is zero if d_getprotobynumber_r is undef, and one of the + * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getprotobynumber_r + * is defined. + */ +#$d_getprotobynumber_r HAS_GETPROTOBYNUMBER_R /**/ +#define GETPROTOBYNUMBER_R_PROTO $getprotobynumber_r_proto /**/ + +/* HAS_GETPROTOENT_R: + * This symbol, if defined, indicates that the getprotoent_r routine + * is available to getprotoent re-entrantly. + */ +/* GETPROTOENT_R_PROTO: + * This symbol encodes the prototype of getprotoent_r. + * It is zero if d_getprotoent_r is undef, and one of the + * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getprotoent_r + * is defined. + */ +#$d_getprotoent_r HAS_GETPROTOENT_R /**/ +#define GETPROTOENT_R_PROTO $getprotoent_r_proto /**/ + +/* HAS_GETSERVBYNAME_R: + * This symbol, if defined, indicates that the getservbyname_r routine + * is available to getservbyname re-entrantly. + */ +/* GETSERVBYNAME_R_PROTO: + * This symbol encodes the prototype of getservbyname_r. + * It is zero if d_getservbyname_r is undef, and one of the + * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getservbyname_r + * is defined. + */ +#$d_getservbyname_r HAS_GETSERVBYNAME_R /**/ +#define GETSERVBYNAME_R_PROTO $getservbyname_r_proto /**/ + +/* HAS_GETSERVBYPORT_R: + * This symbol, if defined, indicates that the getservbyport_r routine + * is available to getservbyport re-entrantly. + */ +/* GETSERVBYPORT_R_PROTO: + * This symbol encodes the prototype of getservbyport_r. + * It is zero if d_getservbyport_r is undef, and one of the + * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getservbyport_r + * is defined. + */ +#$d_getservbyport_r HAS_GETSERVBYPORT_R /**/ +#define GETSERVBYPORT_R_PROTO $getservbyport_r_proto /**/ + +/* HAS_GETSERVENT_R: + * This symbol, if defined, indicates that the getservent_r routine + * is available to getservent re-entrantly. + */ +/* GETSERVENT_R_PROTO: + * This symbol encodes the prototype of getservent_r. + * It is zero if d_getservent_r is undef, and one of the + * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getservent_r + * is defined. + */ +#$d_getservent_r HAS_GETSERVENT_R /**/ +#define GETSERVENT_R_PROTO $getservent_r_proto /**/ + +/* HAS_PTHREAD_ATFORK: + * This symbol, if defined, indicates that the pthread_atfork routine + * is available to setup fork handlers. + */ +#$d_pthread_atfork HAS_PTHREAD_ATFORK /**/ + +/* HAS_READDIR64_R: + * This symbol, if defined, indicates that the readdir64_r routine + * is available to readdir64 re-entrantly. + */ +/* READDIR64_R_PROTO: + * This symbol encodes the prototype of readdir64_r. + * It is zero if d_readdir64_r is undef, and one of the + * REENTRANT_PROTO_T_ABC macros of reentr.h if d_readdir64_r + * is defined. + */ +#$d_readdir64_r HAS_READDIR64_R /**/ +#define READDIR64_R_PROTO $readdir64_r_proto /**/ + +/* HAS_SETHOSTENT_R: + * This symbol, if defined, indicates that the sethostent_r routine + * is available to sethostent re-entrantly. + */ +/* SETHOSTENT_R_PROTO: + * This symbol encodes the prototype of sethostent_r. + * It is zero if d_sethostent_r is undef, and one of the + * REENTRANT_PROTO_T_ABC macros of reentr.h if d_sethostent_r + * is defined. + */ +#$d_sethostent_r HAS_SETHOSTENT_R /**/ +#define SETHOSTENT_R_PROTO $sethostent_r_proto /**/ + +/* HAS_SETLOCALE_R: + * This symbol, if defined, indicates that the setlocale_r routine + * is available to setlocale re-entrantly. + */ +/* SETLOCALE_R_PROTO: + * This symbol encodes the prototype of setlocale_r. + * It is zero if d_setlocale_r is undef, and one of the + * REENTRANT_PROTO_T_ABC macros of reentr.h if d_setlocale_r + * is defined. + */ +#$d_setlocale_r HAS_SETLOCALE_R /**/ +#define SETLOCALE_R_PROTO $setlocale_r_proto /**/ + +/* HAS_SETNETENT_R: + * This symbol, if defined, indicates that the setnetent_r routine + * is available to setnetent re-entrantly. + */ +/* SETNETENT_R_PROTO: + * This symbol encodes the prototype of setnetent_r. + * It is zero if d_setnetent_r is undef, and one of the + * REENTRANT_PROTO_T_ABC macros of reentr.h if d_setnetent_r + * is defined. + */ +#$d_setnetent_r HAS_SETNETENT_R /**/ +#define SETNETENT_R_PROTO $setnetent_r_proto /**/ + +/* HAS_SETPROTOENT_R: + * This symbol, if defined, indicates that the setprotoent_r routine + * is available to setprotoent re-entrantly. + */ +/* SETPROTOENT_R_PROTO: + * This symbol encodes the prototype of setprotoent_r. + * It is zero if d_setprotoent_r is undef, and one of the + * REENTRANT_PROTO_T_ABC macros of reentr.h if d_setprotoent_r + * is defined. + */ +#$d_setprotoent_r HAS_SETPROTOENT_R /**/ +#define SETPROTOENT_R_PROTO $setprotoent_r_proto /**/ + +/* HAS_SETSERVENT_R: + * This symbol, if defined, indicates that the setservent_r routine + * is available to setservent re-entrantly. + */ +/* SETSERVENT_R_PROTO: + * This symbol encodes the prototype of setservent_r. + * It is zero if d_setservent_r is undef, and one of the + * REENTRANT_PROTO_T_ABC macros of reentr.h if d_setservent_r + * is defined. + */ +#$d_setservent_r HAS_SETSERVENT_R /**/ +#define SETSERVENT_R_PROTO $setservent_r_proto /**/ + +/* HAS_TTYNAME_R: + * This symbol, if defined, indicates that the ttyname_r routine + * is available to ttyname re-entrantly. + */ +/* TTYNAME_R_PROTO: + * This symbol encodes the prototype of ttyname_r. + * It is zero if d_ttyname_r is undef, and one of the + * REENTRANT_PROTO_T_ABC macros of reentr.h if d_ttyname_r + * is defined. + */ +#$d_ttyname_r HAS_TTYNAME_R /**/ +#define TTYNAME_R_PROTO $ttyname_r_proto /**/ #endif !GROK!THIS!