X-Git-Url: http://git.shadowcat.co.uk/gitweb/gitweb.cgi?a=blobdiff_plain;f=README.netware;h=1e92b84890a13a2dd62f0178a413d4628ccc5050;hb=7ad017a8809c03aa288ac99952c8d4599b17f858;hp=ac9a19e931b57565adff7773202fa325d5d849a5;hpb=8e39ca144ad8b90102becb938a78d1b7993d0581;p=p5sagit%2Fp5-mst-13.2.git diff --git a/README.netware b/README.netware index ac9a19e..1e92b84 100644 --- a/README.netware +++ b/README.netware @@ -2,70 +2,75 @@ If you read this file _as_is_, just ignore the funny characters you see. It is written in the POD format (see pod/perlpod.pod) which is specifically designed to be readable as is. -=head1 Name +=head1 NAME -Perl for NetWare5.x +perlnetware - Perl for NetWare -=head1 Description +=head1 DESCRIPTION -This file gives the instructions for building Perl5.6 and above for -NetWare5.x. Please read and understand the terms under which this -software is distributed. +This file gives instructions for building Perl 5.7 and above, and also +Perl modules for NetWare. Before you start, you may want to read the +README file found in the top level directory into which the Perl source +code distribution was extracted. Make sure you read and understand +the terms under which the software is being distributed. -=head1 Build +=head1 BUILD This section describes the steps to be performed to build a Perl NLM and other associated NLMs. =head2 Tools & SDK -The build requires Watcom 11.x compiler and linker. In addition, +The build requires CodeWarrior compiler and linker. In addition, the "NetWare SDK", "NLM & NetWare Libraries for C" and "NetWare Server Protocol Libraries for C", all available at -L, are also required. -Microsoft Visual C++ version 4.2 or later is also required. - -Currently the interpreter builds only with Watcom and we do have plans of -making this work with CodeWarrior as well. +L, +are required. Microsoft Visual C++ version 4.2 or later is also +required. =head2 Setup The build process is dependent on the location of the NetWare SDK. -Once the required software is installed, the build environment has to +Once the Tools & SDK are installed, the build environment has to be setup. The following batch files setup the environment. =over 4 -=item Buildtype.bat - -This sets the build type to release or debug. - =item SetNWBld.bat -This sets the NetWare SDK path, Compiler & other tools path & MPK SDK path. +The Execution of this file takes 2 parameters as input. The first +being the NetWare SDK path, second being the path for CodeWarrior +Compiler & tools. Execution of this file sets these paths and also +sets the build type to Release by default. -=item MPKBuild.bat +=item Buildtype.bat + +This is used to set the build type to debug or release. Change the +build type only after executing SetNWBld.bat -This is required only it we are building multi-processor enabled NLMs. +=item * -These batch files are under NetWare\bat folder. These batch files -call a couple of other batch files to setup the environment. Invoking -the batch file with I will show the current settings and I -or I gives the usage help. +Example: + 1. Typing "buildtype d on" at the command prompt causes the buildtype + to be set to Debug type with D2 flag set. + 2. Typing "buildtype d off" or "buildtype d" at the command prompt causes + the buildtype to be set to Debug type with D1 flag set. + 2. Typing "buildtype r" at the command prompt sets it to Release Build type. =back =head2 Make -The make process runs only under WinNT shell. -The NetWare makefile is located under the NetWare folder. -The makefile for NetWare makes use of miniperl.exe to run some of -the Perl scripts. To create miniperl.exe, run nmake from -win32 folder through WinNT commond prompt. The build process -can be stopped after miniperl.exe is created. Then run nmake -from NetWare folder through WinNT command prompt. +The make process runs only under WinNT shell. The NetWare makefile is +located under the NetWare folder. This makes use of miniperl.exe to +run some of the Perl scripts. To create miniperl.exe, first set the +required paths for Visual c++ compilier (specify vcvars32 location) at +the command prompt. Then run nmake from win32 folder through WinNT +command prompt. The build process can be stopped after miniperl.exe +is created. Then run nmake from NetWare folder through WinNT command +prompt. -Currently the follwing two build types are tested on NetWare +Currently the following two build types are tested on NetWare: =over 4 @@ -88,37 +93,58 @@ a release build, else will be copied under I folder for debug builds. =head2 Extensions -The make process also creates the Perl extensions which are called -NLPs (NetWare Loadable Perl). +The make process also creates the Perl extensions as I<.nlm> -=head1 Install +=head1 INSTALL -To install NetWare Perl onto a NetWare server, first map the Sys volume -of a NetWare server to I. This is because the makefile by default -sets the drive letter to I. Type I from NetWare folder -on a WinNT command prompt. This will copy the binaries and module files -onto the NetWare server. The Perl interpreter, I, is copied under -I folder. Copy I to I folder. +To install NetWare Perl onto a NetWare server, first map the Sys +volume of a NetWare server to I. This is because the makefile by +default sets the drive letter to I. Type I from +NetWare folder on a WinNT command prompt. This will copy the binaries +and module files onto the NetWare server under I +folder. The Perl interpreter, I, is copied under +I folder. Copy this to I folder. -=head1 Build new extensions +Example: At the command prompt Type "nmake nwinstall". + This will install NetWare Perl on the NetWare Server. + Similiarly if you type "nmake install", + This will cause the binaries to be installed on the local machine. + (Typically under the c:\perl folder) + +=head1 BUILD NEW EXTENSIONS To build extensions other than standard extensions, NetWare Perl has -to be installed on Windows as well. This can be done by invoking -I from the NetWare folder on a WinNT command prompt. -This will copy all the *.pm files and other required files. -Documentation files are not copied. This has to be done after -installing Perl for Windows. Once this is done, do the following -to build any extension: +to be installed on Windows along with Windows Perl. The Perl for +Windows can be either downloaded from the CPAN site and built using +the sources, or the binaries can be directly downloaded from the +ActiveState site. Installation can be done by invoking I from the NetWare folder on a WinNT command prompt after +building NetWare Perl by following steps given above. This will copy +all the *.pm files and other required files. Documentation files are +not copied. Thus one must first install Windows Perl, Then install +NetWare Perl. + +Once this is done, do the following to build any extension: =over 4 =item * -perl -II -II Makefile.pl +Change to the extension directory where its source files are present. + +=item * + +Run the following command at the command prompt: + + perl -II -II Makefile.pl + +Example: + + perl -Ic:/perl/5.6.1/lib/NetWare-x86-multi-thread -Ic:\perl\5.6.1\lib MakeFile.pl -For example: +or - perl -Ic:/perl/5.6.1/lib/NetWare-multi-thread -Ic:\perl\5.6.1\lib MakeFile.pl + perl -Ic:/perl/5.8.0/lib/NetWare-x86-multi-thread -Ic:\perl\5.8.0\lib MakeFile.pl =item * @@ -129,59 +155,60 @@ nmake nmake install Install will copy the files into the Windows machine where NetWare -Perl is installed, these files have to be copied to the NetWare server -manually. Alternatively, pass I as an -input to makefile.pl above. Where I is the mapped drive to the -sys: volume of the server where Perl on NetWare is installed. Now -saying I, will copy the files to the server. +Perl is installed and these files may have to be copied to the NetWare +server manually. Alternatively, pass I as +an input to makefile.pl above. Here I is the mapped drive to the +sys: volume of the server where Perl on NetWare is installed. Now +typing I, will copy the files onto the NetWare server. -=back - -=head1 Known Issues +Example: You can execute the following on the command prompt. -=over 4 + perl -Ic:/perl/5.6.1/lib/NetWare-x86-multi-thread -Ic:\perl\5.6.1\lib MakeFile.pl + INSTALLSITELIB=i:\perl\lib -=item * - -With USE_ITHREADS not defined, backtick seems to be having some problems. - -=item * +or -The utility scripts (pod2html.pl, pod2man.pl, perldoc.pl etc.) are not -yet ported to work on NetWare. + perl -Ic:/perl/5.8.0/lib/NetWare-x86-multi-thread -Ic:\perl\5.8.0\lib MakeFile.pl + INSTALLSITELIB=i:\perl\lib -=item * +=item * -Also fork() is not currently implemented. +Note: Some modules downloaded from CPAN may require NetWare related +API in order to build on NetWare. Other modules may however build +smoothly with or without minor changes depending on the type of +module. =back -=head1 Acknowledgements +=head1 ACKNOWLEDGEMENTS The makefile for Win32 is used as a reference to create the makefile -for NetWare build. Also, the make process for NetWare port uses +for NetWare. Also, the make process for NetWare port uses miniperl.exe to run scripts during the make and installation process. -=head1 Authors +=head1 AUTHORS -Guruprasad S (sguruprasad@novell.com) Anantha Kesari H Y (hyanantha@novell.com) +Aditya C (caditya@novell.com) -=head1 Date +=head1 DATE =over 4 =item * -Created - 18th Jan 2001 +Created - 18 Jan 2001 =item * -Modified - 25th June 2001 +Modified - 25 June 2001 =item * -Modified - 13 July 2001 +Modified - 13 July 2001 -=back +=item * + +Modified - 28 May 2002 +=back