X-Git-Url: http://git.shadowcat.co.uk/gitweb/gitweb.cgi?a=blobdiff_plain;f=README.hpux;h=dd11e49c3322b0579b5e37f3f23ffd2c177ef8c5;hb=2d708654c8507079d72e5605d5b4d455ad567442;hp=37322a30c9d3b9075b9024be944f80378440e3ca;hpb=1081c3b9ad8b1dc348e105ae0173a124e71062d1;p=p5sagit%2Fp5-mst-13.2.git diff --git a/README.hpux b/README.hpux index 37322a3..dd11e49 100644 --- a/README.hpux +++ b/README.hpux @@ -12,6 +12,32 @@ This document describes various features of HP's Unix operating system (HP-UX) that will affect how Perl version 5 (hereafter just Perl) is compiled and/or runs. +=head2 Using perl as shipped with HP-UX + +As of application release September 2001, HP-UX 11.00 is shipped with +perl-5.6.1 in /opt/perl. The first occurrence is on CD 5012-7954 and +can be installed using + + swinstall -s /cdrom perl + +assuming you have mounted that CD on /cdrom. In this version the +following modules are installed: + + ActivePerl::DocTools-0.04 HTML::Parser-3.19 XML::DOM-1.25 + Archive::Tar-0.072 HTML::Tagset-3.03 XML::Parser-2.27 + Compress::Zlib-1.08 MIME::Base64-2.11 XML::Simple-1.05 + Convert::ASN1-0.10 Net-1.07 XML::XPath-1.09 + Digest::MD5-2.11 PPM-2.1.5 XML::XSLT-0.32 + File::CounterFile-0.12 SOAP::Lite-0.46 libwww-perl-5.51 + Font::AFM-1.18 Storable-1.011 libxml-perl-0.07 + HTML-Tree-3.11 URI-1.11 perl-ldap-0.23 + +The build is a portable hppa-1.1 multithread build that supports large +files compiled with gcc-2.9-hppa-991112 + +If you perform a new installation, then Perl will be installed +automatically. + =head2 Compiling Perl 5 on HP-UX When compiling Perl, you must use an ANSI C compiler. The C compiler @@ -44,8 +70,8 @@ The original version of PA-RISC, HP no longer sells any system with this chip. The following systems contained PA-RISC 1.0 chips: - 600, 635, 645, 808, 815, 822, 825, 832, 834, 835, 840, 842, 845, 850, 852, - 855, 860, 865, 870, 890 + 600, 635, 645, 808, 815, 822, 825, 832, 834, 835, 840, 842, 845, 850, + 852, 855, 860, 865, 870, 890 =head2 PA-RISC 1.1 @@ -54,15 +80,16 @@ system. The following systems contain with PA-RISC 1.1 chips: - 705, 710, 712, 715, 720, 722, 725, 728, 730, 735, 742, 743, 745, 747, 750, - 755, 770, 777, 778, 779, 800, 801, 803, 806, 807, 809, 811, 813, 816, 817, - 819, 821, 826, 827, 829, 831, 837, 839, 841, 847, 849, 851, 856, 857, 859, - 867, 869, 877, 887, 891, 892, 897, A180, A180C, B115, B120, B132L, B132L+, - B160L, B180L, C100, C110, C115, C120, C160L, D200, D210, D220, D230, D250, - D260, D310, D320, D330, D350, D360, D410, DX0, DX5, DZO, E25, E35, E45, - E55, F10, F20, F30, G30, G40, G50, G60, G70, H20, H30, H40, H50, H60, H70, - I30, I40, I50, I60, I70, J200, J210, J210XC, K100, K200, K210, K220, K230, - K400, K410, K420, S700i, S715, S724, S760, T500, T520 + 705, 710, 712, 715, 720, 722, 725, 728, 730, 735, 742, 743, 744, 745, + 747, 750, 755, 770, 777, 778, 779, 800, 801, 803, 806, 807, 809, 811, + 813, 816, 817, 819, 821, 826, 827, 829, 831, 837, 839, 841, 847, 849, + 851, 856, 857, 859, 867, 869, 877, 887, 891, 892, 897, A180, A180C, + B115, B120, B132L, B132L+, B160L, B180L, C100, C110, C115, C120, + C160L, D200, D210, D220, D230, D250, D260, D310, D320, D330, D350, + D360, D410, DX0, DX5, DXO, E25, E35, E45, E55, F10, F20, F30, G30, + G40, G50, G60, G70, H20, H30, H40, H50, H60, H70, I30, I40, I50, I60, + I70, J200, J210, J210XC, K100, K200, K210, K220, K230, K400, K410, + K420, S700i, S715, S744, S760, T500, T520 =head2 PA-RISC 2.0 @@ -72,12 +99,23 @@ The most recent upgrade to the PA-RISC design, it added support for As of the date of this document's last update, the following systems contain PA-RISC 2.0 chips (this is very likely to be out of date): - 700, 780, 781, 782, 783, 785, 802, 804, 810, 820, 861, 871, 879, 889, 893, - 895, 896, 898, 899, B1000, C130, C140, C160, C180, C180+, C180-XP, C200+, - C400+, C3000, C360, CB260, D270, D280, D370, D380, D390, D650, J220, J2240, - J280, J282, J400, J410, J5000, J7000, K250, K260, K260-EG, K270, K360, - K370, K380, K450, K460, K460-EG, K460-XP, K470, K570, K580, L1000, L2000, - N4000, R380, R390, T540, T600, V2000, V2200, V2250, V2500 + 700, 780, 781, 782, 783, 785, 802, 804, 810, 820, 861, 871, 879, 889, + 893, 895, 896, 898, 899, A400, A500, B1000, B2000, C130, C140, C160, + C180, C180+, C180-XP, C200+, C400+, C3000, C360, C3600, CB260, D270, + D280, D370, D380, D390, D650, J220, J2240, J280, J282, J400, J410, + J5000, J5500XM, J5600, J7000, J7600, K250, K260, K260-EG, K270, K360, + K370, K380, K450, K460, K460-EG, K460-XP, K470, K570, K580, L1000, + L2000, L3000, N4000, R380, R390, RP5400, RP5430, RP5450, RP5470, + RP7400, RP8400, SD16000, SD32000, SD64000, T540, T600, V2000, V2200, + V2250, V2500, V2600 + +=head2 Itanium + +HP also ships servers with the 128-bit Itanium processor(s). As of the +date of this document's last update, the following systems contain +Itanium chips (this is very likely to be out of date): + + RX4610, RX9610 A complete list of models at the time the OS was built is in the file /opt/langtools/lib/sched.models. The first column corresponds to the @@ -90,7 +128,7 @@ chip type used. (Start browsing at the bottom to prevent confusion ;-) An executable compiled on a PA-RISC 2.0 platform will not execute on a PA-RISC 1.1 platform, even if they are running the same version of HP-UX. If you are building Perl on a PA-RISC 2.0 platform and want that -Perl to to also run on a PA-RISC 1.1, the compiler flags +DAportable and +Perl to also run on a PA-RISC 1.1, the compiler flags +DAportable and +DS32 should be used. It is no longer possible to compile PA-RISC 1.0 executables on either @@ -163,10 +201,13 @@ library that is already linked into perl. Some extensions, like DB_File and Compress::Zlib use/require prebuilt libraries for the perl extensions/modules to work. If these libraries -are built using the default configuration, it might happen that you run -into an error like "invalid loader fixup" during load phase. HP is aware -of this problem and address it at - http://devresource.hp.com/devresource/Docs/TechTips/cxxTips.html#tip13 +are built using the default configuration, it might happen that you +run into an error like "invalid loader fixup" during load phase. +HP is aware of this problem. Search the HP-UX cxx-dev forums for +discussions about the subject. The short answer is that B +(all libraries, everything) must be compiled with C<+z> or C<+Z> to be +PIC (position independent code). In HP-UX 11.00 or newer the linker +error message should tell the name of the offending object file. A more general approach is to intervene manually, as with an example for the DB_File module, which requires SleepyCat's libdb.sl: @@ -261,12 +302,12 @@ is listed before -lc in the list of libraries to link Perl with. The hints provided for HP-UX during Configure will try very hard to get this right for you. -HP-UX versions before 10.30 require a seperate installation of a POSIX +HP-UX versions before 10.30 require a separate installation of a POSIX threads library package. Two examples are the HP DCE package, available on "HP-UX Hardware Extensions 3.0, Install and Core OS, Release 10.20, April 1999 (B3920-13941)" or the Freely available PTH package, available though worldwide HP-UX mirrors of precompiled packages -(e.g. http://hpux.tn.tudelft.nl/hppd/hpux/alpha.html) +(e.g. http://hpux.tn.tudelft.nl/hppd/hpux/) =head2 64-bit Perl on HP-UX @@ -383,6 +424,6 @@ With much assistance regarding shared libraries from Marc Sabatella. =head1 DATE -Version 0.6.3: 2001-05-16 +Version 0.6.4: 2001-10-09 =cut