X-Git-Url: http://git.shadowcat.co.uk/gitweb/gitweb.cgi?a=blobdiff_plain;f=Makefile.SH;h=103f503374713f34ca2827e319bc6e4fe864f118;hb=7d824d8e6f7cacfafe95d58fa9ab3d99bd41e854;hp=c9cbfe60f2f97dede9be5485b2654f48479b01e4;hpb=8170cb1295a74f5fb68f22e0be2bbfb4d5b3e568;p=p5sagit%2Fp5-mst-13.2.git

diff --git a/Makefile.SH b/Makefile.SH
index c9cbfe6..103f503 100644
--- a/Makefile.SH
+++ b/Makefile.SH
@@ -190,7 +190,7 @@ DYNALOADER = lib/auto/DynaLoader/DynaLoader\$(LIB_EXT)
 
 libs = $perllibs $cryptlib
 
-public = perl $suidperl utilities translators
+public = perl\$(EXE_EXT) $suidperl utilities translators
 
 shellflags = $shellflags
 
@@ -198,6 +198,8 @@ shellflags = $shellflags
 # do it for you.
 $make_set_make
 
+# Mention $gmake here so it gets probed for by Configure.
+
 # These variables may need to be manually set for non-Unix systems.
 AR = $full_ar
 EXE_EXT = $_exe
@@ -287,13 +289,13 @@ h = $(h1) $(h2) $(h3) $(h4) $(h5)
 c1 = $(mallocsrc) av.c scope.c op.c doop.c doio.c dump.c hv.c mg.c
 c2 = perl.c perly.c pp.c pp_hot.c pp_ctl.c pp_sys.c regcomp.c regexec.c utf8.c
 c3 = gv.c sv.c taint.c toke.c util.c deb.c run.c universal.c xsutils.c
-c4 = globals.c perlio.c perlapi.c numeric.c locale.c pp_pack.c sharedsv.c
+c4 = globals.c perlio.c perlapi.c numeric.c locale.c pp_pack.c pp_sort.c sharedsv.c
 
 c = $(c1) $(c2) $(c3) $(c4) miniperlmain.c perlmain.c
 
 obj1 = $(mallocobj) gv$(OBJ_EXT) toke$(OBJ_EXT) perly$(OBJ_EXT) op$(OBJ_EXT) regcomp$(OBJ_EXT) dump$(OBJ_EXT) util$(OBJ_EXT) mg$(OBJ_EXT)
 obj2 = hv$(OBJ_EXT) av$(OBJ_EXT) run$(OBJ_EXT) pp_hot$(OBJ_EXT) sv$(OBJ_EXT) pp$(OBJ_EXT) scope$(OBJ_EXT) pp_ctl$(OBJ_EXT) pp_sys$(OBJ_EXT)
-obj3 = doop$(OBJ_EXT) doio$(OBJ_EXT) regexec$(OBJ_EXT) utf8$(OBJ_EXT) taint$(OBJ_EXT) deb$(OBJ_EXT) universal$(OBJ_EXT) xsutils$(OBJ_EXT) globals$(OBJ_EXT) perlio$(OBJ_EXT) perlapi$(OBJ_EXT) numeric$(OBJ_EXT) locale$(OBJ_EXT) pp_pack$(OBJ_EXT) sharedsv$(OBJ_EXT)
+obj3 = doop$(OBJ_EXT) doio$(OBJ_EXT) regexec$(OBJ_EXT) utf8$(OBJ_EXT) taint$(OBJ_EXT) deb$(OBJ_EXT) universal$(OBJ_EXT) xsutils$(OBJ_EXT) globals$(OBJ_EXT) perlio$(OBJ_EXT) perlapi$(OBJ_EXT) numeric$(OBJ_EXT) locale$(OBJ_EXT) pp_pack$(OBJ_EXT) pp_sort$(OBJ_EXT) sharedsv$(OBJ_EXT)
 
 obj = $(obj1) $(obj2) $(obj3) $(ARCHOBJS)
 
@@ -320,9 +322,9 @@ lintflags = -hbvxac
 
 .PHONY: all compile translators utilities
 
-all: $(FIRSTMAKEFILE) miniperl extra.pods $(private) $(public) $(dynamic_ext) $(nonxs_ext) extras.make
+all: $(FIRSTMAKEFILE) miniperl$(EXE_EXT) extra.pods $(private) $(public) $(dynamic_ext) $(nonxs_ext) extras.make
 	@echo " ";
-	@echo "	Everything is up to date. 'make test' to run test suite."
+	@echo "	Everything is up to date. Type '$(MAKE) test' to run test suite."
 
 compile: all
 	echo "testing compilation" > testcompile;
@@ -330,10 +332,10 @@ compile: all
 	cd x2p; $(MAKE) compile;
 	cd pod; $(MAKE) compile;
 
-translators:	miniperl lib/Config.pm FORCE
+translators:	miniperl$(EXE_EXT) lib/Config.pm FORCE
 	@echo " "; echo "	Making x2p stuff"; cd x2p; $(LDLIBPTH) $(MAKE) all
 
-utilities:	miniperl lib/Config.pm $(plextract) lib/lib.pm FORCE
+utilities:	miniperl$(EXE_EXT) lib/Config.pm $(plextract) lib/lib.pm FORCE
 	@echo " "; echo "	Making utilities"; cd utils; $(LDLIBPTH) $(MAKE) all
 
 
@@ -494,26 +496,26 @@ $(LIBPERL): $& perl$(OBJ_EXT) $(obj) $(LIBPERLEXPORT)
 !NO!SUBS!
 
 	case "${osname}${osvers}" in
-	next4*)
+	aix*)
 		$spitshell >>Makefile <<'!NO!SUBS!'
 miniperl: $& miniperlmain$(OBJ_EXT) $(LIBPERL) opmini$(OBJ_EXT)
-	$(CC) -o miniperl `echo $(obj) | sed 's/ op$(OBJ_EXT) / /'` \
+	$(CC) -o miniperl $(CLDFLAGS) \
+	    `echo $(obj) | sed 's/ op$(OBJ_EXT) / /'` \
 	    miniperlmain$(OBJ_EXT) opmini$(OBJ_EXT) perl$(OBJ_EXT) $(libs)
 	$(LDLIBPTH) ./miniperl -w -Ilib -MExporter -e '<?>' || $(MAKE) minitest
 !NO!SUBS!
 		;;
-	aix*)
+	beos*|next4*)
 		$spitshell >>Makefile <<'!NO!SUBS!'
 miniperl: $& miniperlmain$(OBJ_EXT) $(LIBPERL) opmini$(OBJ_EXT)
-	$(CC) -o miniperl $(CLDFLAGS) \
-	    `echo $(obj) | sed 's/ op$(OBJ_EXT) / /'` \
+	$(CC) -o miniperl `echo $(obj) | sed 's/ op$(OBJ_EXT) / /'` \
 	    miniperlmain$(OBJ_EXT) opmini$(OBJ_EXT) perl$(OBJ_EXT) $(libs)
 	$(LDLIBPTH) ./miniperl -w -Ilib -MExporter -e '<?>' || $(MAKE) minitest
 !NO!SUBS!
 		;;
 	*)
 		$spitshell >>Makefile <<'!NO!SUBS!'
-miniperl: $& miniperlmain$(OBJ_EXT) $(LIBPERL) opmini$(OBJ_EXT)
+miniperl$(EXE_EXT): $& miniperlmain$(OBJ_EXT) $(LIBPERL) opmini$(OBJ_EXT)
 	-@rm -f miniperl.xok
 	$(LDLIBPTH) $(CC) $(CLDFLAGS) -o miniperl \
 	    miniperlmain$(OBJ_EXT) opmini$(OBJ_EXT) $(LLIBPERL) $(libs)
@@ -524,19 +526,19 @@ miniperl: $& miniperlmain$(OBJ_EXT) $(LIBPERL) opmini$(OBJ_EXT)
 
 	$spitshell >>Makefile <<'!NO!SUBS!'
 
-perl: $& perlmain$(OBJ_EXT) $(LIBPERL) $(DYNALOADER) $(static_ext) ext.libs $(PERLEXPORT)
+perl$(EXE_EXT): $& perlmain$(OBJ_EXT) $(LIBPERL) $(DYNALOADER) $(static_ext) ext.libs $(PERLEXPORT)
 	-@rm -f miniperl.xok
 	$(SHRPENV) $(LDLIBPTH) $(CC) -o perl$(PERL_SUFFIX) $(PERL_PROFILE_LDFLAGS) $(CLDFLAGS) $(CCDLFLAGS) perlmain$(OBJ_EXT) $(DYNALOADER) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs)
 
 # Purify/Quantify Perls.
 
-pureperl: $& perlmain$(OBJ_EXT) $(LIBPERL) $(DYNALOADER) $(static_ext) ext.libs $(PERLEXPORT)
+pureperl$(EXE_EXT): $& perlmain$(OBJ_EXT) $(LIBPERL) $(DYNALOADER) $(static_ext) ext.libs $(PERLEXPORT)
 	$(SHRPENV) $(LDLIBPTH) purify $(CC) -o pureperl $(CLDFLAGS) $(CCDLFLAGS) perlmain$(OBJ_EXT) $(DYNALOADER) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs)
 
-purecovperl: $& perlmain$(OBJ_EXT) $(LIBPERL) $(DYNALOADER) $(static_ext) ext.libs $(PERLEXPORT)
+purecovperl$(EXE_EXT): $& perlmain$(OBJ_EXT) $(LIBPERL) $(DYNALOADER) $(static_ext) ext.libs $(PERLEXPORT)
 	$(SHRPENV) $(LDLIBPTH) purecov $(CC) -o purecovperl $(CLDFLAGS) $(CCDLFLAGS) perlmain$(OBJ_EXT) $(DYNALOADER) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs)
 
-quantperl: $& perlmain$(OBJ_EXT) $(LIBPERL) $(DYNALOADER) $(static_ext) ext.libs $(PERLEXPORT)
+quantperl$(EXE_EXT): $& perlmain$(OBJ_EXT) $(LIBPERL) $(DYNALOADER) $(static_ext) ext.libs $(PERLEXPORT)
 	$(SHRPENV) $(LDLIBPTH) quantify $(CC) -o quantperl $(CLDFLAGS) $(CCDLFLAGS) perlmain$(OBJ_EXT) $(DYNALOADER) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs)
 
 # Third Degree Perl (Tru64 only)
@@ -623,7 +625,7 @@ microperl:
 # checks as well as the special code to validate that the script in question
 # has been invoked correctly.
 
-suidperl: $& sperl$(OBJ_EXT) perlmain$(OBJ_EXT) $(LIBPERL) $(DYNALOADER) $(static_ext) ext.libs $(PERLEXPORT)
+suidperl$(EXE_EXT): $& sperl$(OBJ_EXT) perlmain$(OBJ_EXT) $(LIBPERL) $(DYNALOADER) $(static_ext) ext.libs $(PERLEXPORT)
 	$(SHRPENV) $(LDLIBPTH) $(CC) -o suidperl $(CLDFLAGS) $(CCDLFLAGS) perlmain$(OBJ_EXT) sperl$(OBJ_EXT) $(DYNALOADER) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs)
 
 !NO!SUBS!
@@ -642,7 +644,7 @@ sperl$(OBJ_EXT): perl.c $(h)
 #	test -d lib/auto || mkdir lib/auto
 #
 .PHONY: preplibrary
-preplibrary: miniperl lib/Config.pm lib/lib.pm
+preplibrary: miniperl$(EXE_EXT) lib/Config.pm lib/lib.pm
 	@sh ./makedir lib/auto
 	@echo "	AutoSplitting perl library"
 	$(LDLIBPTH) ./miniperl -Ilib -e 'use AutoSplit; \
@@ -652,11 +654,11 @@ preplibrary: miniperl lib/Config.pm lib/lib.pm
 # Take care to avoid modifying lib/Config.pm without reason
 # (If trying to create a new port and having problems with the configpm script,
 # try 'make minitest' and/or commenting out the tests at the end of configpm.)
-lib/Config.pm: config.sh miniperl configpm
+lib/Config.pm: config.sh miniperl$(EXE_EXT) configpm
 	$(LDLIBPTH) ./miniperl configpm configpm.tmp
 	sh mv-if-diff configpm.tmp $@
 
-lib/ExtUtils/Miniperl.pm: miniperlmain.c miniperl minimod.pl lib/Config.pm
+lib/ExtUtils/Miniperl.pm: miniperlmain.c miniperl$(EXE_EXT) minimod.pl lib/Config.pm
 	$(LDLIBPTH) ./miniperl minimod.pl > minimod.tmp
 	sh mv-if-diff minimod.tmp $@
 	-touch lib/ExtUtils/Miniperl.pm
@@ -664,15 +666,15 @@ lib/ExtUtils/Miniperl.pm: miniperlmain.c miniperl minimod.pl lib/Config.pm
 lib/re.pm: ext/re/re.pm
 	cp ext/re/re.pm ext/re/re.tmp && sh mv-if-diff ext/re/re.tmp lib/re.pm
 
-$(plextract):	miniperl lib/Config.pm
+$(plextract):	miniperl$(EXE_EXT) lib/Config.pm
 	@-rm -f $@
 	$(LDLIBPTH) ./miniperl -Ilib $@.PL
 
-lib/lib.pm:	miniperl lib/Config.pm
+lib/lib.pm:	miniperl$(EXE_EXT) lib/Config.pm
 	@-rm -f $@
 	$(LDLIBPTH) ./miniperl -Ilib lib/lib_pm.PL
 
-extra.pods: miniperl
+extra.pods: miniperl$(EXE_EXT)
 	-@test -f extra.pods && rm -f `cat extra.pods`
 	-@rm -f extra.pods
 	-@for x in `grep -l '^=[a-z]' README.* | grep -v README.vms` ; do \
@@ -683,13 +685,13 @@ extra.pods: miniperl
 	-@rm -f pod/perlvms.pod
 	-@test -f vms/perlvms.pod && cd pod && $(LNS) ../vms/perlvms.pod perlvms.pod && cd .. && echo "pod/perlvms.pod" >> extra.pods
 
-extras.make: perl
+extras.make: perl$(EXE_EXT)
 	-@test -s extras.lst && $(LDLIBPTH) PATH=`pwd`:${PATH} PERL5LIB=`pwd`/lib ./perl -Ilib -MCPAN -e '@ARGV&&make(@ARGV)' `cat extras.lst`
 
-extras.test: perl
+extras.test: perl$(EXE_EXT)
 	-@test -s extras.lst && $(LDLIBPTH) PATH=`pwd`:${PATH} PERL5LIB=`pwd`/lib ./perl -Ilib -MCPAN -e '@ARGV&&test(@ARGV)' `cat extras.lst`
 
-extras.install: perl
+extras.install: perl$(EXE_EXT)
 	-@test -s extras.lst && $(LDLIBPTH) PATH=`pwd`:${PATH} PERL5LIB=`pwd`/lib ./perl -Ilib -MCPAN -e '@ARGV&&install(@ARGV)' `cat extras.lst`
 
 .PHONY: install install-strip install-all install-verbose install-silent \
@@ -817,9 +819,10 @@ regen_headers:	FORCE
 	-perl bytecode.pl
 	-perl regcomp.pl
 	-perl warnings.pl
+	-perl autodoc.pl
 
 regen_pods:	FORCE
-	-cd pod; $(LDLIBPTH) make regen_pods
+	-cd pod; $(LDLIBPTH) $(MAKE) regen_pods
 
 regen_all: $(PERLYVMS) regen_headers regen_pods
 
@@ -833,16 +836,16 @@ regen_all: $(PERLYVMS) regen_headers regen_pods
 #
 # DynaLoader may be needed for extensions that use Makefile.PL.
 
-$(DYNALOADER):	miniperl preplibrary FORCE
+$(DYNALOADER):	miniperl$(EXE_EXT) preplibrary FORCE
 	@$(LDLIBPTH) sh ext/util/make_ext static $@ MAKE=$(MAKE) LIBPERL_A=$(LIBPERL)
 
-d_dummy $(dynamic_ext):	miniperl preplibrary $(DYNALOADER) FORCE
+d_dummy $(dynamic_ext):	miniperl$(EXE_EXT) preplibrary $(DYNALOADER) FORCE
 	@$(LDLIBPTH) sh ext/util/make_ext dynamic $@ MAKE=$(MAKE) LIBPERL_A=$(LIBPERL)
 
-s_dummy $(static_ext):	miniperl preplibrary $(DYNALOADER) FORCE
+s_dummy $(static_ext):	miniperl$(EXE_EXT) preplibrary $(DYNALOADER) FORCE
 	@$(LDLIBPTH) sh ext/util/make_ext static $@ MAKE=$(MAKE) LIBPERL_A=$(LIBPERL)
 
-n_dummy $(nonxs_ext):	miniperl preplibrary $(DYNALOADER) FORCE
+n_dummy $(nonxs_ext):	miniperl$(EXE_EXT) preplibrary $(DYNALOADER) FORCE
 	@$(LDLIBPTH) sh ext/util/make_ext nonxs $@ MAKE=$(MAKE) LIBPERL_A=$(LIBPERL)
 
 .PHONY: clean _tidy _mopup _cleaner1 _cleaner2 \
@@ -852,7 +855,7 @@ n_dummy $(nonxs_ext):	miniperl preplibrary $(DYNALOADER) FORCE
 clean:		_tidy _mopup
 
 realclean:	_realcleaner _mopup
-	@echo "Note that make realclean does not delete config.sh or Policy.sh"
+	@echo "Note that '$(MAKE) realclean' does not delete config.sh or Policy.sh"
 
 _clobber:
 	-@rm -f Cross/run-* Cross/to-* Cross/from-*
@@ -877,7 +880,8 @@ _mopup:
 	-rm -f perl.third lib*.so.perl.third perl.3log t/perl.third t/perl.3log
 	-rm -f perl.pixie lib*.so.perl.pixie lib*.so.Addrs
 	-rm -f perl.Addrs perl.Counts t/perl.Addrs t/perl.Counts *perl.xok
-	rm -f perl suidperl miniperl $(LIBPERL) libperl.* microperl
+	-rm -f perlld cygwin.c ld2 libperl*.def libperl*.dll
+	rm -f perl$(EXE_EXT) suidperl$(EXE_EXT) miniperl$(EXE_EXT) $(LIBPERL) libperl.* microperl
 
 # Do not 'make _tidy' directly.
 _tidy:
@@ -899,7 +903,7 @@ _cleaner1:
 	done
 
 _cleaner2:
-	rm -f core core.*perl.*.? *perl.core t/core t/core.perl.*.? t/*perl.core t/misctmp* t/forktmp* t/tmp* t/c t/perl t/rantests .?*.c so_locations $(LIBPERL_NONSHR) $(MINIPERL_NONSHR)
+	rm -f core core.*perl.*.? *perl.core t/core t/core.perl.*.? t/*perl.core t/misctmp* t/forktmp* t/tmp* t/c t/perl$(EXE_EXT) t/rantests .?*.c so_locations $(LIBPERL_NONSHR) $(MINIPERL_NONSHR)
 	rm -rf $(addedbyconf)
 	rm -f $(FIRSTMAKEFILE) $(FIRSTMAKEFILE).old
 	rm -f $(private)
@@ -908,7 +912,9 @@ _cleaner2:
 	rm -f h2ph.man pstruct
 	rm -rf .config
 	rm -f testcompile compilelog
-	-rmdir lib/B lib/Data lib/Digest lib/Encode lib/IO/Socket lib/IO lib/Filter/Util lib/List lib/MIME lib/PerlIO lib/Scalar lib/Sys lib/Thread lib/XS
+	-rmdir lib/B lib/Data lib/Digest lib/Encode lib/IO/Socket lib/IO/t lib/IO
+	-rmdir lib/Filter/Util lib/List lib/MIME lib/PerlIO lib/Scalar lib/Sys
+	-rmdir lib/Thread lib/XS
 
 _realcleaner:
 	@$(LDLIBPTH) $(MAKE) _cleaner1 CLEAN=realclean
@@ -970,7 +976,7 @@ _test_prep:
 
 test_prep_pre: preplibrary utilities $(nonxs_ext)
 
-test_prep: test_prep_pre miniperl perl$(EXE_EXT) $(dynamic_ext) $(TEST_PERL_DLL)
+test_prep: test_prep_pre miniperl$(EXE_EXT) perl$(EXE_EXT) $(dynamic_ext) $(TEST_PERL_DLL)
 	PERL=./perl $(MAKE) _test_prep
 
 _test_tty:
@@ -1012,7 +1018,7 @@ test-notty:	test_notty
 
 # Targets for Third Degree testing.
 
-test_prep.third: test_prep perl.third perl.third$(EXE_EXT)
+test_prep.third: test_prep perl.third
 	PERL=./perl.third $(MAKE) _test_prep
 
 test.third check.third:	test_prep.third perl.third
@@ -1034,7 +1040,7 @@ test_notty.deparse:	test_prep
 
 # Can't depend on lib/Config.pm because that might be where miniperl
 # is crashing.
-minitest: miniperl lib/re.pm
+minitest: miniperl$(EXE_EXT) lib/re.pm
 	@echo "You may see some irrelevant test failures if you have been unable"
 	@echo "to build lib/Config.pm."
 	- cd t && (rm -f perl$(EXE_EXT); $(LNS) ../miniperl$(EXE_EXT) perl$(EXE_EXT)) \